summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-27Merge tag 'x86_core_for_5.18_rc1' of ↵Linus Torvalds4-24/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
2022-03-26Merge tag 'memcpy-v5.18-rc1' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull FORTIFY_SOURCE updates from Kees Cook: "This series consists of two halves: - strict compile-time buffer size checking under FORTIFY_SOURCE for the memcpy()-family of functions (for extensive details and rationale, see the first commit) - enabling FORTIFY_SOURCE for Clang, which has had many overlapping bugs that we've finally worked past" * tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: fortify: Add Clang support fortify: Make sure strlen() may still be used as a constant expression fortify: Use __diagnose_as() for better diagnostic coverage fortify: Make pointer arguments const Compiler Attributes: Add __diagnose_as for Clang Compiler Attributes: Add __overloadable for Clang Compiler Attributes: Add __pass_object_size for Clang fortify: Replace open-coded __gnu_inline attribute fortify: Update compile-time tests for Clang 14 fortify: Detect struct member overflows in memset() at compile-time fortify: Detect struct member overflows in memmove() at compile-time fortify: Detect struct member overflows in memcpy() at compile-time
2022-03-26Merge tag 'devicetree-for-5.18' of ↵Linus Torvalds4-30/+418
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ...
2022-03-25Merge tag 'kbuild-gnu11-v5.18' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild update for C11 language base from Masahiro Yamada: "Kbuild -std=gnu11 updates for v5.18 Linus pointed out the benefits of C99 some years ago, especially variable declarations in loops [1]. At that time, we were not ready for the migration due to old compilers. Recently, Jakob Koschel reported a bug in list_for_each_entry(), which leaks the invalid pointer out of the loop [2]. In the discussion, we agreed that the time had come. Now that GCC 5.1 is the minimum compiler version, there is nothing to prevent us from going to -std=gnu99, or even straight to -std=gnu11. Discussions for a better list iterator implementation are ongoing, but this patch set must land first" [1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/ [2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/ * tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS Kbuild: move to -std=gnu11 Kbuild: use -Wdeclaration-after-statement Kbuild: add -Wno-shift-negative-value where -Wextra is used
2022-03-25Merge tag 's390-5.18-1' of ↵Linus Torvalds2-42/+6
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Raise minimum supported machine generation to z10, which comes with various cleanups and code simplifications (usercopy/spectre mitigation/etc). - Rework extables and get rid of anonymous out-of-line fixups. - Page table helpers cleanup. Add set_pXd()/set_pte() helper functions. Covert pte_val()/pXd_val() macros to functions. - Optimize kretprobe handling by avoiding extra kprobe on __kretprobe_trampoline. - Add support for CEX8 crypto cards. - Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans. - Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT group sections which simplifies kpatch support. - Always use the packed stack layout and extend kernel unwinder tests. - Add sanity checks for ftrace code patching. - Add s390dbf debug log for the vfio_ap device driver. - Various virtual vs physical address confusion fixes. - Various small fixes and improvements all over the code. * tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits) s390/test_unwind: add kretprobe tests s390/kprobes: Avoid additional kprobe in kretprobe handling s390: convert ".insn" encoding to instruction names s390: assume stckf is always present s390/nospec: move to single register thunks s390: raise minimum supported machine generation to z10 s390/uaccess: Add copy_from/to_user_key functions s390/nospec: align and size extern thunks s390/nospec: add an option to use thunk-extern s390/nospec: generate single register thunks if possible s390/pci: make zpci_set_irq()/zpci_clear_irq() static s390: remove unused expoline to BC instructions s390/irq: use assignment instead of cast s390/traps: get rid of magic cast for per code s390/traps: get rid of magic cast for program interruption code s390/signal: fix typo in comments s390/asm-offsets: remove unused defines s390/test_unwind: avoid build warning with W=1 s390: remove .fixup section s390/bpf: encode register within extable entry ...
2022-03-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-5/+26
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ...
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds3-21/+121
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-24Merge tag 'flexible-array-transformations-5.18-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members
2022-03-23checkpatch: use python3 to find codespell dictionarySagar Patel1-2/+2
Commit 0ee3e7b8893e ("checkpatch: get default codespell dictionary path from package location") introduced the ability to search for the codespell dictionary rather than hardcoding its path. codespell requires Python 3.6 or above, but on some systems, the python executable is a Python 2.7 interpreter. In this case, searching for the dictionary fails, subsequently making codespell fail: No codespell typos will be found - file '/usr/share/codespell/dictionary.txt': No such file or directory So, use python3 to remove ambiguity. In addition, when searching for dictionary.txt, do not check if the codespell executable exists since, - checkpatch.pl only uses dictionary.txt, not the codespell executable. - codespell can be installed via a Python package manager, in which case the codespell executable may not be present in a typical $PATH, but a dictionary does exist. Link: https://lkml.kernel.org/r/20220309180048.147672-1-sagarmp@cs.unc.edu Signed-off-by: Sagar Patel <sagarmp@cs.unc.edu> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23checkpatch: add early_param exception to blank line after struct/function testJoe Perches1-1/+1
Add early_param as another exception to the blank line preferred after function/struct/union declaration or definition test. Link: https://lkml.kernel.org/r/3bd6ada59f411a7685d7e64eeb670540d4bfdcde.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23checkpatch: add --fix option for some TRAILING_STATEMENTSJoe Perches1-2/+16
Single line code like: if (foo) bar; should generally be written: if (foo) bar; Add a --fix test to do so. This fix is not done when an ASSIGN_IN_IF in the same line exists. Link: https://lkml.kernel.org/r/20220128185924.80137-2-joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23checkpatch: prefer MODULE_LICENSE("GPL") over MODULE_LICENSE("GPL v2")Joe Perches1-0/+7
There is no effective difference. Given the large number of uses of "GPL v2", emit this message only for patches as a trivial treeside sed could be done one day. Ref: commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity") Link: https://lkml.kernel.org/r/20220128185924.80137-1-joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23Merge tag 'asm-generic-5.18' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...
2022-03-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+16
Merge updates from Andrew Morton: - A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs - Most the MM patches which precede the patches in Willy's tree: kasan, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb, userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp, cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap, zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (227 commits) mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release() Docs/ABI/testing: add DAMON sysfs interface ABI document Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface selftests/damon: add a test for DAMON sysfs interface mm/damon/sysfs: support DAMOS stats mm/damon/sysfs: support DAMOS watermarks mm/damon/sysfs: support schemes prioritization mm/damon/sysfs: support DAMOS quotas mm/damon/sysfs: support DAMON-based Operation Schemes mm/damon/sysfs: support the physical address space monitoring mm/damon/sysfs: link DAMON for virtual address spaces monitoring mm/damon: implement a minimal stub for sysfs-based DAMON interface mm/damon/core: add number of each enum type values mm/damon/core: allow non-exclusive DAMON start/stop Docs/damon: update outdated term 'regions update interval' Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling Docs/vm/damon: call low level monitoring primitives the operations mm/damon: remove unnecessary CONFIG_DAMON option mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}() mm/damon/dbgfs-test: fix is_target_id() change ...
2022-03-22scripts/spelling.txt: add more spellings to spelling.txtColin Ian King1-0/+16
Some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel in the past four months. Link: https://lkml.kernel.org/r/20220216152343.105546-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22Merge tag 'sched-core-2022-03-22' of ↵Linus Torvalds1-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Cleanups for SCHED_DEADLINE - Tracing updates/fixes - CPU Accounting fixes - First wave of changes to optimize the overhead of the scheduler build, from the fast-headers tree - including placeholder *_api.h headers for later header split-ups. - Preempt-dynamic using static_branch() for ARM64 - Isolation housekeeping mask rework; preperatory for further changes - NUMA-balancing: deal with CPU-less nodes - NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD) - Updates to RSEQ UAPI in preparation for glibc usage - Lots of RSEQ/selftests, for same - Add Suren as PSI co-maintainer * tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) sched/headers: ARM needs asm/paravirt_api_clock.h too sched/numa: Fix boot crash on arm64 systems headers/prep: Fix header to build standalone: <linux/psi.h> sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y cgroup: Fix suspicious rcu_dereference_check() usage warning sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity() sched/deadline,rt: Remove unused functions for !CONFIG_SMP sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy() sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file sched/deadline: Remove unused def_dl_bandwidth sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE sched/tracing: Don't re-read p->state when emitting sched_switch event sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race sched/cpuacct: Remove redundant RCU read lock sched/cpuacct: Optimize away RCU read lock sched/cpuacct: Fix charge percpu cpuusage sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies ...
2022-03-22Merge tag 'locking-core-2022-03-21' of ↵Linus Torvalds2-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Changes in this cycle were: Bitops & cpumask: - Always inline various generic helpers, to improve code generation, but also for instrumentation, found by noinstr validation. - Add a x86-specific cpumask_clear_cpu() helper to improve code generation Atomics: - Fix atomic64_{read_acquire,set_release} fallbacks Lockdep: - Fix /proc/lockdep output loop iteration for classes - Fix /proc/lockdep potential access to invalid memory - Add Mark Rutland as reviewer for atomic primitives - Minor cleanups Jump labels: - Clean up the code a bit Misc: - Add __sched annotations to percpu rwsem primitives - Enable RT_MUTEXES on PREEMPT_RT by default - Stray v8086_mode() inlining fix, result of noinstr objtool validation" * tag 'locking-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Refactor #ifdef of struct static_key jump_label: Avoid unneeded casts in STATIC_KEY_INIT_{TRUE,FALSE} locking/lockdep: Iterate lock_classes directly when reading lockdep files x86/ptrace: Always inline v8086_mode() for instrumentation cpumask: Add a x86-specific cpumask_clear_cpu() helper locking: Enable RT_MUTEXES by default on PREEMPT_RT. locking/local_lock: Make the empty local_lock_*() function a macro. atomics: Fix atomic64_{read_acquire,set_release} fallbacks locking: Add missing __sched attributes cpumask: Always inline helpers which use bit manipulation functions asm-generic/bitops: Always inline all bit manipulation helpers locking/lockdep: Avoid potential access of invalid memory in lock_class lockdep: Use memset_startat() helper in reinit_class() MAINTAINERS: add myself as reviewer for atomics
2022-03-22kbuild: Fixup the IBT kbuild changesPeter Zijlstra3-55/+27
Masahiro-san deemed my kbuild changes to support whole module objtool runs too terrible to live and gracefully provided an alternative. Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/CAK7LNAQ2mYMnOKMQheVi+6byUFE3KEkjm1zcndNUfe0tORGvug@mail.gmail.com
2022-03-21Merge tag 'overflow-v5.18-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "These changes come in roughly two halves: support of Gustavo A. R. Silva's struct_size() work via additional helpers for catching overflow allocation size calculations, and conversions of selftests to KUnit (which includes some tweaks for UML + Clang): - Convert overflow selftest to KUnit - Convert stackinit selftest to KUnit - Implement size_t saturating arithmetic helpers - Allow struct_size() to be used in initializers" * tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib: stackinit: Convert to KUnit um: Allow builds with Clang lib: overflow: Convert to Kunit overflow: Provide constant expression struct_size overflow: Implement size_t saturating arithmetic helpers test_overflow: Regularize test reporting output
2022-03-21Merge tag 'hardening-v5.18-rc1' of ↵Linus Torvalds2-4/+27
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: - Add arm64 Shadow Call Stack support for GCC 12 (Dan Li) - Avoid memset with stack offset randomization under Clang (Marco Elver) - Clean up stackleak plugin to play nice with .noinstr (Kees Cook) - Check stack depth for greater usercopy hardening coverage (Kees Cook) * tag 'hardening-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: Add gcc Shadow Call Stack support m68k: Implement "current_stack_pointer" xtensa: Implement "current_stack_pointer" usercopy: Check valid lifetime via stack depth stack: Constrain and fix stack offset randomization with Clang builds stack: Introduce CONFIG_RANDOMIZE_KSTACK_OFFSET gcc-plugins/stackleak: Ignore .noinstr.text and .entry.text gcc-plugins/stackleak: Exactly match strings instead of prefixes gcc-plugins/stackleak: Provide verbose mode
2022-03-21Merge tag 'docs-5.18' of git://git.lwn.net/linuxLinus Torvalds1-187/+167
Pull documentation updates from Jonathan Corbet: "It has been a moderately busy cycle for documentation; some of the highlights are: - Numerous PDF-generation improvements - Kees's new document with guidelines for researchers studying the development community. - The ongoing stream of Chinese translations - Thorsten's new document on regression handling - A major reworking of the internal documentation for the kernel-doc script. Plus the usual stream of typo fixes and such" * tag 'docs-5.18' of git://git.lwn.net/linux: (80 commits) docs/kernel-parameters: update description of mem= docs/zh_CN: Add sched-nice-design Chinese translation docs: scheduler: Convert schedutil.txt to ReST Docs: ktap: add code-block type docs: serial: fix a reference file name in driver.rst docs: UML: Mention telnetd for port channel docs/zh_CN: add damon reclaim translation docs/zh_CN: add damon usage translation docs/zh_CN: add admin-guide damon start translation docs/zh_CN: add admin-guide damon index translation docs/zh_CN: Refactoring the admin-guide directory index zh_CN: Add translation for admin-guide/mm/index.rst zh_CN: Add translations for admin-guide/mm/ksm.rst Add Chinese translation for vm/ksm.rst docs/zh_CN: Add sched-stats Chinese translation docs/zh_CN: add devicetree of_unittest translation docs/zh_CN: add devicetree usage-model translation docs/zh_CN: add devicetree index translation Documentation: describe how to apply incremental stable patches docs/zh_CN: add peci subsystem translation ...
2022-03-21um: Allow builds with ClangKees Cook1-0/+1
Add SUBARCH target for Clang+um (which must go last, not alphabetically, so the other SUBARCHes are assigned). Remove open-coded "DEFINE" macro, instead using linux/kbuild.h's version which was updated to use Clang-friendly assembly in commit cf0c3e68aa81 ("kbuild: fix asm-offset generation to work with clang"). Redefine "DEFINE_LONGS" in terms of "COMMENT" and "DEFINE" so that the intended coment actually has useful content. Add a missed "break" to avoid implicit fall-through warnings. This lets me run KUnit tests with Clang: $ ./tools/testing/kunit/kunit.py run --make_options LLVM=1 ... Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: David Gow <davidgow@google.com> Cc: linux-um@lists.infradead.org Cc: linux-kbuild@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: kunit-dev@googlegroups.com Cc: llvm@lists.linux.dev Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/lkml/Yg2YubZxvYvx7%2Fnm@dev-arch.archlinux-ax161/ Tested-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/lkml/CABVgOSk=oFxsbSbQE-v65VwR2+mXeGXDDjzq8t7FShwjJ3+kUg@mail.gmail.com/ Signed-off-by: Kees Cook <keescook@chromium.org> --- v1: https://lore.kernel.org/lkml/20220217002843.2312603-1-keescook@chromium.org v2: https://lore.kernel.org/lkml/20220224055831.1854786-1-keescook@chromium.org v3: - use kbuild.h to avoid duplication (Masahiro) - fix intended comments (Masahiro) - use SUBARCH (Nathan)
2022-03-18scripts: get_abi.pl: Fix typo in help messageMichal Simek1-1/+1
Fix misspelled word in the script. (s/COMAND/COMMAND/). Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1ff3605db3dead41bbde33fbbff6754900eceead.1645789205.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-15x86/alternative: Use .ibt_endbr_seal to seal indirect callsPeter Zijlstra2-11/+46
Objtool's --ibt option generates .ibt_endbr_seal which lists superfluous ENDBR instructions. That is those instructions for which the function is never indirectly called. Overwrite these ENDBR instructions with a NOP4 such that these function can never be indirect called, reducing the number of viable ENDBR targets in the kernel. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154319.822545231@infradead.org
2022-03-15objtool: Rename --duplicate to --ltoPeter Zijlstra1-1/+1
In order to prepare for LTO like objtool runs for modules, rename the duplicate argument to lto. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154319.172584233@infradead.org
2022-03-13Kbuild: use -Wdeclaration-after-statementMark Rutland1-1/+3
The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting the use of additional C11 features such as for-loop initial declarations. One contentious aspect of C99 is that it permits mixed declarations and code, and for now at least, it seems preferable to enforce that declarations must come first. These warnings were already enabled in the kernel itself, but not for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses a separate set of CFLAGS. This patch fixes an existing violation in modpost.c, which is not reported because of the missing flag in KBUILD_USERCFLAGS: | scripts/mod/modpost.c: In function ‘match’: | scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] | 837 | const char *endp = p + strlen(p) - 1; | | ^~~~~ Signed-off-by: Mark Rutland <mark.rutland@arm.com> [arnd: don't add a duplicate flag to the default set, update changelog] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-03-13Kbuild: add -Wno-shift-negative-value where -Wextra is usedArnd Bergmann1-0/+1
As a preparation for moving to -std=gnu11, turn off the -Wshift-negative-value option. This warning is enabled by gcc when building with -Wextra for c99 or higher, but not for c89. Since the kernel already relies on well-defined overflow behavior, the warning is not helpful and can simply be disabled in all locations that use -Wextra. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-03-11dt-bindings: kbuild: Use DTB files for validationRob Herring3-27/+8
Switch the DT validation to use DTB files directly instead of a DTS to YAML conversion. The original motivation for supporting validation on DTB files was to enable running validation on a running system (e.g. 'dt-validate /sys/firmware/fdt') or other cases where the original source DTS is not available. The YAML format was not without issues. Using DTBs with the schema type information solves some of those problems. The YAML format relies on the DTS source level information including bracketing of properties, size directives, and phandle tags all of which are lost in a DTB file. While standardizing the bracketing is a good thing, it does cause a lot of extra warnings and churn to fix them. Another issue has been signed types are not validated correctly as sign information is not propagated to YAML. Using the schema type information allows for proper handling of signed types. YAML also can't represent the full range of 64-bit integers as numbers are stored as floats by most/all parsers. The DTB validation works by decoding property values using the type information in the schemas themselves. The main corner case this does not work for is matrix types where neither dimension is fixed. For now, checking the dimensions in these cases are skipped. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220310160513.1708182-3-robh@kernel.org
2022-03-11dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validateRob Herring1-3/+2
In preparation for supporting validation of DTB files, the full processed schema will always be needed in order to extract type information from it. Therefore, the processed schema containing only what DT_SCHEMA_FILES specifies won't work. Instead, dt-validate has gained an option, -l or --limit, to specify which schema(s) to use for validation. As the command line option is new, we the minimum dtschema version must be updated. Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220310160513.1708182-2-robh@kernel.org
2022-03-11sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headersFrederic Weisbecker1-5/+12
Displaying "PREEMPT" on kernel headers when CONFIG_PREEMPT_DYNAMIC=y can be misleading for anybody involved in remote debugging because it is then not guaranteed that there is an actual preemption behaviour. It depends on default Kconfig or boot defined choices. Therefore, tell about PREEMPT_DYNAMIC on static kernel headers and leave the search for the actual preemption behaviour to browsing dmesg. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220217111240.GA742892@lothringen
2022-03-10s390/nospec: add an option to use thunk-externVasily Gorbik1-0/+5
Currently with -mindirect-branch=thunk and -mfunction-return=thunk compiler options expoline thunks are put into individual COMDAT group sections. s390 is the only architecture which has group sections and it has implications for kpatch and objtool tools support. Using -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern is an alternative, which comes with a need to generate all required expoline thunks manually. Unfortunately modules area is too far away from the kernel image, and expolines from the kernel image cannon be used. But since all new distributions (except Debian) build kernels for machine generations newer than z10, where "exrl" instruction is available, that leaves only 16 expolines thunks possible. Provide an option to build the kernel with -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern for z10 or newer. This also requires to postlink expoline thunks into all modules explicitly. Currently modules already contain most expolines anyhow. Unfortunately -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern options support is broken in gcc <= 11.2. Additional compile test is required to verify proper gcc support. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Co-developed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/extable: convert to relative table with dataHeiko Carstens1-42/+1
Follow arm64, riscv, and x86 and change extable layout to common "relative table with data". This allows to get rid of s390 specific code in sorttable.c. The main difference to before is that extable entries do not contain a relative function pointer anymore. Instead data and type fields are added. The type field is used to indicate which exception handler needs to be called, while the data field is currently unused. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-07nds32: Remove the architectureAlan Kao1-3/+0
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit RISC target designed by Andes Technologies. Support was added to the kernel in 2016 as the replacement RISC-V based V5 processors were already announced, and maintained by (current or former) Andes employees. As explained by Alan Kao, new customers are now all using RISC-V, and all known nds32 users are already on longterm stable kernels provided by Andes, with no development work going into mainline support any more. While the port is still in a reasonably good shape, it only gets worse over time without active maintainers, so it seems best to remove it before it becomes unusable. As always, if it turns out that there are mainline users after all, and they volunteer to maintain the port in the future, the removal can be reverted. Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/ Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/ Link: https://www.andestech.com/en/products-solutions/andestar-architecture/ Signed-off-by: Alan Kao <alankao@andestech.com> [arnd: rewrite changelog to provide more background] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-28of: unittest: add program to process EXPECT messagesFrank Rowand1-0/+408
If unittest detects a problem it will print a warning or error message to the console. Unittest also triggers warning and error messages from other kernel code as a result of intentionally bad unittest data. This has led to confusion as to whether the triggered messages are an expected result of a test or whether there is a real problem that is independent of unittest. EXPECT messages were added to unittest to report each triggered message that is expected, resulting in verbose console output. scripts/dtc/of_unittest is a new program that processes the EXPECT messages to determine whether the triggered messages occurred and also removes the excess verbosity of the EXPECT messages. More information is available from 'scripts/dtc/of_unittest_expect --help'. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220201181413.2719955-1-frowand.list@gmail.com
2022-02-28Merge 5.17-rc6 into driver-core-nextGreg Kroah-Hartman4-12/+18
We need the driver core fix in here as well for future changes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-24docs: scripts/kernel-doc: Detect absence of FILE argAkira Yokosawa1-8/+17
Currently, when there is no FILE argument following a switch such as -man, -rst, or -none, kernel-doc exits with a warning from perl (long msg folded): Use of uninitialized value $ARGV[0] in pattern match (m//) at ./scripts/kernel-doc line 438. , which is unhelpful. Improve the behavior by adding a check at the bottom of parsing loop. If the argument is absent, display help text and exit with the code of 1 (via usage()). Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/7b136049-a3ba-0eb5-8717-364d773ff914@gmail.com [jc: reworked to fix conflict with pod patches] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Refresh the copyright linesTomasz Warniełło1-0/+2
I wanted to clean up these lines, but in the end decided not to touch the old ones and just add my own about POD. I'll leave the cleanup for lawyers. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-12-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Drop obsolete commentsTomasz Warniełło1-143/+0
What for? To improve the script maintainability. 1. License As stated by Jonathan Corbet in the reply to my version 1, the SPDX line is enough. 2. The to-do list comment As suggested by Jonathan Corbet in reply to my version 3, this section doesn't need to be transitioned. And so it is removed for clarity. 3. The historical changelog comments As suggested by Jonathan Corbet in a reply to v3, this section can go. I wanted to keep it, but since it doesn't contain copyright notices, let's just have it clean and simple. 4. The "format of comments" comment block As suggested by Jani Nikula in a reply to my first version of this transformation, Documentation/doc-guide/kernel-doc.rst can serve as the information hub for comment formatting. The section DESCRIPTION already points there, so the original comment block can just be removed. Suggested-by: Jonathan Corbet <corbet@lwn.net> Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-11-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Replace the usage functionTomasz Warniełło1-10/+1
Aim: unified POD, user more satisfied, script better structured You can see the results with: $ scripts/kernel-doc -help Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-10-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Translate the "Other parameters" subsection of OPTIONSTomasz Warniełło1-5/+18
Aim: unified POD, user more satisfied, script better structured Notes: - The -help token is added. - The entries are sorted alphbetically. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-9-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Translate the "Output selection modifiers" subsection ↵Tomasz Warniełło1-8/+29
of OPTIONS Aim: unified POD, user more satisfied, script better structured A subsection "reStructuredText only" is added for -enable-lineno. Other notes: - paragraphing correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-8-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Translate the "Output selection" subsection of OPTIONSTomasz Warniełło1-13/+29
Aim: unified POD, user more satisfied, script better structured The plurals in -function and -nosymbol are corrected to singulars. That's how the script works now. I think this describes the syntax better. The plurar suggests multiple FILE arguments might be possible. So this seems more coherent. Other notes: - paragraphing correction - article correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-7-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Translate the "Output format selection modifier" ↵Tomasz Warniełło1-7/+15
subsection of OPTIONS Aim: unified POD, user more happy This section is renamed to "Output format modifiers" to make it simple. To make it even more simple, a subsection is added: "reStructuredText only". Other notes: - paragraphing correction - article correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-6-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Translate the "Output format selection" subsection of ↵Tomasz Warniełło1-5/+26
OPTIONS Another step in the direction of a uniform POD documentation, which will make users happier. Options land at the end of the script, not to clutter the file top. The default output format is corrected to rst. That's what it is now. A POD delimiting comment is added to the script head, which improves the script logical structure. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-5-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Translate the DESCRIPTION sectionTomasz Warniełło1-6/+9
Transition the description section into POD. This is one of the standard documentation sections. This adjustment makes the section available for POD and makes it look better. Notes: - an article addition - paragraphing correction Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-4-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Relink argument parsing error handling to pod2usageTomasz Warniełło1-3/+17
The former usage function is substituted, although not as the -h and -help parameter handler yet. Purpose: Use Pod::Usage to handle documentation printing in an integrated way. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-3-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-24scripts: kernel-doc: Add the basic POD sectionsTomasz Warniełło1-0/+25
The NAME section provides the doc title, while SYNOPSIS contains the basic syntax and usage description, which will be printed in the help document and in the error output produced on wrong script usage. The rationale is to give users simple and succinct enlightment, at the same time structuring the script internally for the maintainers. In the synopsis, Rst-only options are grouped around rst, and the rest is arranged as in the OPTIONS subsections (yet to be translated into POD, check at the end of the series). The third of the basic sections, DESCRIPTION, is added separately. Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Disliked-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220218181628.1411551-2-tomasz.warniello@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-02-22scripts/pahole-flags.sh: Parse DWARF and generate BTF with multithreading.Kui-Feng Lee1-0/+3
Pass a "-j" argument to pahole if possible to reduce the time of generating BTF info. Since v1.22, pahole can parse DWARF and generate BTF with multithreading to speed up the conversion. It will reduce the overall build time of the kernel for seconds. v3 fixes whitespaces and improves the commit description. v2 checks the version of pahole to enable multithreading only if possible. [v2] https://lore.kernel.org/bpf/20220216193431.2691015-1-kuifeng@fb.com/ [v1] https://lore.kernel.org/bpf/20220216004616.2079689-1-kuifeng@fb.com/ Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220217175427.649713-1-kuifeng@fb.com
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-11/+17
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 00:15:16 +0000