summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2022-09-29kbuild: move .vmlinux.objs rule to Makefile.modpostMasahiro Yamada2-20/+28
.vmlinux.objs is used by modpost, so scripts/Makefile.modpost is a better place to generate it. It is used only when CONFIG_MODVERSIONS=y. It should be guarded by "ifdef CONFIG_MODVERSIONS". Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-29kbuild: list sub-directories in ./KbuildMasahiro Yamada1-0/+2
Use the ordinary obj-y syntax to list subdirectories. Note1: Previously, the link order of lib-y depended on CONFIG_MODULES; lib-y was linked before drivers-y when CONFIG_MODULES=y, otherwise after drivers-y. This was a bug of commit 7273ad2b08f8 ("kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y"), but it was not a big deal after all. Now, all objects listed in lib-y are linked last, irrespective of CONFIG_MODULES. Note2: Finally, the single target build in arch/*/lib/ works correctly. There was a bug report about this. [1] $ make ARCH=arm arch/arm/lib/findbit.o CALL scripts/checksyscalls.sh AS arch/arm/lib/findbit.o [1]: https://lore.kernel.org/linux-kbuild/YvUQOwL6lD4%2F5%2FU6@shell.armlinux.org.uk/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-29Makefile.compiler: replace cc-ifversion with compiler-specific macrosNick Desaulniers2-5/+9
cc-ifversion is GCC specific. Replace it with compiler specific variants. Update the users of cc-ifversion to use these new macros. Link: https://github.com/ClangBuiltLinux/linux/issues/350 Link: https://lore.kernel.org/llvm/CAGG=3QWSAUakO42kubrCap8fp-gm1ERJJAYXTnP1iHk_wrH=BQ@mail.gmail.com/ Suggested-by: Bill Wendling <morbo@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: rpm-pkg: fix breakage when V=1 is usedJanis Schoetterl-Glausch1-2/+2
Doing make V=1 binrpm-pkg results in: Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EgV6qJ + umask 022 + cd . + /bin/rm -rf /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x + /bin/mkdir -p /home/scgl/rpmbuild/BUILDROOT + /bin/mkdir /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x + mkdir -p /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot + make -f ./Makefile image_name + cp test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) arch/s390/boot/bzImage /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot/vmlinuz-6.0.0-rc5+ cp: invalid option -- 'e' Try 'cp --help' for more information. error: Bad exit status from /var/tmp/rpm-tmp.EgV6qJ (%install) Because the make call to get the image name is verbose and prints additional information. Fixes: 993bdde94547 ("kbuild: add image_name to no-sync-config-targets") Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29scripts: remove unused argument 'type'Zeng Heng1-3/+3
Remove unused function argument, and there is no logic changes. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29Kconfig: remove sym_set_choice_valueZeng Heng2-6/+1
sym_set_choice_value could be removed and directly call sym_set_tristate_value instead. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: use objtool-args-y to clean up objtool argumentsMasahiro Yamada2-26/+20
Based on Linus' patch. Refactor scripts/Makefile.vmlinux_o as well. Link: https://lore.kernel.org/lkml/CAHk-=wgjTMQgiKzBZTmb=uWGDEQxDdyF1+qxBkODYciuNsmwnw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-09-29kbuild: fix and refactor single target buildMasahiro Yamada1-38/+16
The single target build has a subtle bug for the combination for an individual file and a subdirectory. [1] 'make kernel/fork.i' builds only kernel/fork.i $ make kernel/fork.i CALL scripts/checksyscalls.sh DESCEND objtool CPP kernel/fork.i [2] 'make kernel/' builds only under the kernel/ directory. $ make kernel/ CALL scripts/checksyscalls.sh DESCEND objtool CC kernel/fork.o CC kernel/exec_domain.o [snip] CC kernel/rseq.o AR kernel/built-in.a But, if you try to do [1] and [2] in a single command, you will get only [1] with a weird log: $ make kernel/fork.i kernel/ CALL scripts/checksyscalls.sh DESCEND objtool CPP kernel/fork.i make[2]: Nothing to be done for 'kernel/'. With 'make kernel/fork.i kernel/', you should get both [1] and [2]. Rewrite the single target build. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: rewrite check-local-export in sh/awkOwen Rafferty1-49/+48
Remove the bash build dependency for those who otherwise do not have it installed. This also provides a significant speedup: $ make defconfig $ make yes2modconfig ... $ find . -name "*.o" | grep -v vmlinux | wc 3169 3169 89615 $ export NM=nm $ time sh -c 'find . -name "*.o" | grep -v vmlinux | xargs -n1 ./scripts/check-local-export' Without patch: 0m15.90s real 0m12.17s user 0m05.28s system With patch: dash + nawk 0m02.16s real 0m02.92s user 0m00.34s system dash + busybox awk 0m02.36s real 0m03.36s user 0m00.34s system dash + gawk 0m02.07s real 0m03.26s user 0m00.32s system bash + gawk 0m03.55s real 0m05.00s user 0m00.54s system Signed-off-by: Owen Rafferty <owen@owenrafferty.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29Revert "kbuild: Make scripts/compile.h when sh != bash"Masahiro Yamada1-3/+0
This reverts commit [1] in the pre-git era. I do not know what problem happened in the script when sh != bash because there is no commit message. Now that this script is much simpler than it used to be, let's revert it, and let' see. (If this turns out to be problematic, fix the code with proper commit description.) [1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=11acbbbb8a50f4de7dbe4bc1b5acc440dfe81810 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29scripts/mkcompile_h: move LC_ALL=C to '$LD -v'Masahiro Yamada1-6/+2
Minimize the scope of LC_ALL=C like before commit 87c94bfb8ad3 ("kbuild: override build timestamp & version"). Give LC_ALL=C to '$LD -v' to get the consistent version output, as commit bcbcf50f5218 ("kbuild: fix ld-version.sh to not be affected by locale") mentioned the LD version is affected by locale. While I was here, I merged two sed invocations. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: build init/built-in.a just onceMasahiro Yamada2-91/+15
Kbuild builds init/built-in.a twice; first during the ordinary directory descending, second from scripts/link-vmlinux.sh. We do this because UTS_VERSION contains the build version and the timestamp. We cannot update it during the normal directory traversal since we do not yet know if we need to update vmlinux. UTS_VERSION is temporarily calculated, but omitted from the update check. Otherwise, vmlinux would be rebuilt every time. When Kbuild results in running link-vmlinux.sh, it increments the version number in the .version file and takes the timestamp at that time to really fix UTS_VERSION. However, updating the same file twice is a footgun. To avoid nasty timestamp issues, all build artifacts that depend on init/built-in.a are atomically generated in link-vmlinux.sh, where some of them do not need rebuilding. To fix this issue, this commit changes as follows: [1] Split UTS_VERSION out to include/generated/utsversion.h from include/generated/compile.h include/generated/utsversion.h is generated just before the vmlinux link. It is generated under include/generated/ because some decompressors (s390, x86) use UTS_VERSION. [2] Split init_uts_ns and linux_banner out to init/version-timestamp.c from init/version.c init_uts_ns and linux_banner contain UTS_VERSION. During the ordinary directory descending, they are compiled with __weak and used to determine if vmlinux needs relinking. Just before the vmlinux link, they are compiled without __weak to embed the real version and timestamp. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: do not deduplicate modules.orderMasahiro Yamada1-1/+1
The AWK code was added to deduplicate modules.order in case $(obj-m) contains the same module multiple times, but it is actually unneeded since commit b2c885549122 ("kbuild: update modules.order only when contained modules are updated"). The list is already deduplicated before being processed by AWK because $^ is the deduplicated list of prerequisites. (Please note the real-prereqs macro uses $^) Yet, modules.order will contain duplication if two different Makefiles build the same module: foo/Makefile: obj-m += bar/baz.o foo/bar/Makefile: obj-m += baz.o However, the parallel builds cannot properly handle this case in the first place. So, it is better to let it fail (as already done by scripts/modules-check.sh). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: check sha1sum just once for each atomic headerMasahiro Yamada1-33/+0
It is unneeded to check the sha1sum every time. Create the timestamp files to manage it. Add '.' to clean-dirs because 'make clean' must visit ./Kbuild to clean up the timestamp files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: hard-code KBUILD_ALLDIRS in scripts/Makefile.packageMasahiro Yamada1-1/+4
My future plan is to list subdirectories in ./Kbuild. When it occurs, $(vmlinux-alldirs) will not contain all subdirectories. Let's hard-code the directory list until I get around to implementing a more sophisticated way for generating a source tarball. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-29kbuild: remove the target in signal traps when interruptedMasahiro Yamada1-1/+22
When receiving some signal, GNU Make automatically deletes the target if it has already been changed by the interrupted recipe. If the target is possibly incomplete due to interruption, it must be deleted so that it will be remade from scratch on the next run of make. Otherwise, the target would remain corrupted permanently because its timestamp had already been updated. Thanks to this behavior of Make, you can stop the build any time by pressing Ctrl-C, and just run 'make' to resume it. Kbuild also relies on this feature, but it is equivalently important for any build systems that make decisions based on timestamps (if you want to support Ctrl-C reliably). However, this does not always work as claimed; Make immediately dies with Ctrl-C if its stderr goes into a pipe. [Test Makefile] foo: echo hello > $@ sleep 3 echo world >> $@ [Test Result] $ make # hit Ctrl-C echo hello > foo sleep 3 ^Cmake: *** Deleting file 'foo' make: *** [Makefile:3: foo] Interrupt $ make 2>&1 | cat # hit Ctrl-C echo hello > foo sleep 3 ^C$ # 'foo' is often left-over The reason is because SIGINT is sent to the entire process group. In this example, SIGINT kills 'cat', and 'make' writes the message to the closed pipe, then dies with SIGPIPE before cleaning the target. A typical bad scenario (as reported by [1], [2]) is to save build log by using the 'tee' command: $ make 2>&1 | tee log This can be problematic for any build systems based on Make, so I hope it will be fixed in GNU Make. The maintainer of GNU Make stated this is a long-standing issue and difficult to fix [3]. It has not been fixed yet as of writing. So, we cannot rely on Make cleaning the target. We can do it by ourselves, in signal traps. As far as I understand, Make takes care of SIGHUP, SIGINT, SIGQUIT, and SITERM for the target removal. I added the traps for them, and also for SIGPIPE just in case cmd_* rule prints something to stdout or stderr (but I did not observe an actual case where SIGPIPE was triggered). [Note 1] The trap handler might be worth explaining. rm -f $@; trap - $(sig); kill -s $(sig) $$ This lets the shell kill itself by the signal it caught, so the parent process can tell the child has exited on the signal. Generally, this is a proper manner for handling signals, in case the calling program (like Bash) may monitor WIFSIGNALED() and WTERMSIG() for WCE although this may not be a big deal here because GNU Make handles SIGHUP, SIGINT, SIGQUIT in WUE and SIGTERM in IUE. IUE - Immediate Unconditional Exit WUE - Wait and Unconditional Exit WCE - Wait and Cooperative Exit For details, see "Proper handling of SIGINT/SIGQUIT" [4]. [Note 2] Reverting 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files") would directly address [1], but it only saves if_changed_dep. As reported in [2], all commands that use redirection can potentially leave an empty (i.e. broken) target. [Note 3] Another (even safer) approach might be to always write to a temporary file, and rename it to $@ at the end of the recipe. <command> > $(tmp-target) mv $(tmp-target) $@ It would require a lot of Makefile changes, and result in ugly code, so I did not take it. [Note 4] A little more thoughts about a pattern rule with multiple targets (or a grouped target). %.x %.y: %.z <recipe> When interrupted, GNU Make deletes both %.x and %.y, while this solution only deletes $@. Probably, this is not a big deal. The next run of make will execute the rule again to create $@ along with the other files. [1]: https://lore.kernel.org/all/YLeot94yAaM4xbMY@gmail.com/ [2]: https://lore.kernel.org/all/20220510221333.2770571-1-robh@kernel.org/ [3]: https://lists.gnu.org/archive/html/help-make/2021-06/msg00001.html [4]: https://www.cons.org/cracauer/sigint.html Fixes: 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files") Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-28x86: enable initial Rust supportMiguel Ojeda1-2/+13
Note that only x86_64 is covered and not all features nor mitigations are handled, but it is enough as a starting point and showcases the basics needed to add Rust support for a new architecture. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: David Gow <davidgow@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28Kbuild: add Rust supportMiguel Ojeda9-15/+203
Having most of the new files in place, we now enable Rust support in the build system, including `Kconfig` entries related to Rust, the Rust configuration printer and a few other bits. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Douglas Su <d0u9.su@outlook.com> Signed-off-by: Douglas Su <d0u9.su@outlook.com> Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org> Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org> Co-developed-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `is_rust_module.sh`Daniel Xu1-0/+16
This script is used to detect whether a kernel module is written in Rust. It will later be used to disable BTF generation on Rust modules as BTF does not yet support Rust. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `rust_is_available.sh`Miguel Ojeda3-0/+168
This script tests whether the Rust toolchain requirements are in place to enable Rust support. It uses `min-tool-version.sh` to fetch the version numbers. The build system will call it to set `CONFIG_RUST_IS_AVAILABLE` in a later patch. It also has an option (`-v`) to explain what is missing, which is useful to set up the development environment. This is used via the `make rustavailable` target added in a later patch. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Miguel Cano <macanroj@gmail.com> Signed-off-by: Miguel Cano <macanroj@gmail.com> Co-developed-by: Tiago Lam <tiagolam@gmail.com> Signed-off-by: Tiago Lam <tiagolam@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `generate_rust_target.rs`Miguel Ojeda2-0/+172
This script takes care of generating the custom target specification file for `rustc`, based on the kernel configuration. It also serves as an example of a Rust host program. A dummy architecture is kept in this patch so that a later patch adds x86 support on top with as few changes as possible. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: David Gow <davidgow@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `generate_rust_analyzer.py`Miguel Ojeda1-0/+135
The `generate_rust_analyzer.py` script generates the configuration file (`rust-project.json`) for rust-analyzer. rust-analyzer is a modular compiler frontend for the Rust language. It provides an LSP server which can be used in editors such as VS Code, Emacs or Vim. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: decode_stacktrace: demangle Rust symbolsMiguel Ojeda1-0/+14
Recent versions of both Binutils (`c++filt`) and LLVM (`llvm-cxxfilt`) provide Rust v0 mangling support. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: checkpatch: enable language-independent checks for RustMiguel Ojeda1-2/+2
Include Rust in the "source code files" category, so that the language-independent tests are checked for Rust too, and teach `checkpatch` about the comment style for Rust files. This enables the malformed SPDX check, the misplaced SPDX license tag check, the long line checks, the lines without a newline check and the embedded filename check. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: checkpatch: diagnose uses of `%pA` in the C side as errorsMiguel Ojeda1-2/+6
The `%pA` format specifier is only intended to be used from Rust. `checkpatch.pl` already gives a warning for invalid specificers: WARNING: Invalid vsprintf pointer extension '%pA' This makes it an error and introduces an explanatory message: ERROR: Invalid vsprintf pointer extension '%pA' - '%pA' is only intended to be used from Rust code Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Joe Perches <joe@perches.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: increase maximum kernel symbol length to 512Miguel Ojeda1-2/+2
Rust symbols can become quite long due to namespacing introduced by modules, types, traits, generics, etc. For instance, the following code: pub mod my_module { pub struct MyType; pub struct MyGenericType<T>(T); pub trait MyTrait { fn my_method() -> u32; } impl MyTrait for MyGenericType<MyType> { fn my_method() -> u32 { 42 } } } generates a symbol of length 96 when using the upcoming v0 mangling scheme: _RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method At the moment, Rust symbols may reach up to 300 in length. Setting 512 as the maximum seems like a reasonable choice to keep some headroom. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: support "big" kernel symbolsMiguel Ojeda1-3/+26
Rust symbols can become quite long due to namespacing introduced by modules, types, traits, generics, etc. Increasing to 255 is not enough in some cases, therefore introduce longer lengths to the symbol table. In order to avoid increasing all lengths to 2 bytes (since most of them are small, including many Rust ones), use ULEB128 to keep smaller symbols in 1 byte, with the rest in 2 bytes. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: add static relationship between `KSYM_NAME_LEN{,_BUFFER}`Miguel Ojeda1-2/+12
This adds a static assert to ensure `KSYM_NAME_LEN_BUFFER` gets updated when `KSYM_NAME_LEN` changes. The relationship used is one that keeps the new size (512+1) close to the original buffer size (500). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: avoid hardcoding buffer sizeBoqun Feng1-2/+8
This introduces `KSYM_NAME_LEN_BUFFER` in place of the previously hardcoded size of the input buffer. It will also make it easier to update the size in a single place in a later patch. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: use `ARRAY_SIZE` instead of hardcoded sizeBoqun Feng1-1/+1
This removes one place where the `500` constant is hardcoded. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Geert Stappers <stappers@stappers.nl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-27dt: Add a check for undocumented compatible strings in kernelRob Herring1-0/+69
Add a make target, dt_compatible_check, to extract compatible strings from kernel sources and check if they are documented by a schema. At least version v2022.08 of dtschema with dt-check-compatible is required. This check can also be run manually on specific files or directories: scripts/dtc/dt-extract-compatibles drivers/clk/ | \ xargs dt-check-compatible -v -s Documentation/devicetree/bindings/processed-schema.json Currently, there are about 3800 undocumented compatible strings. Most of these are cases where the binding is not yet converted (given there are 1900 .txt binding files remaining). Link: https://lore.kernel.org/all/20220916012510.2718170-1-robh@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org>
2022-09-27kbuild: take into account DT_SCHEMA_FILES changes while checking dtbsDmitry Baryshkov1-8/+6
It is useful to be able to recheck dtbs files against a limited set of DT schema files. This can be accomplished by using differnt DT_SCHEMA_FILES argument values while rerunning make dtbs_check. However for some reason if_changed_rule doesn't pick up the rule_dtc changes (and doesn't retrigger the build). Fix this by changing if_changed_rule to if_changed_dep and squashing DTC and dt-validate into a single new command. Then if_changed_dep triggers on DT_SCHEMA_FILES changes and reruns the build/check. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220915114422.79378-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-09-26cfi: Switch to -fsanitize=kcfiSami Tolvanen1-19/+4
Switch from Clang's original forward-edge control-flow integrity implementation to -fsanitize=kcfi, which is better suited for the kernel, as it doesn't require LTO, doesn't use a jump table that requires altering function references, and won't break cross-module function address equality. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-6-samitolvanen@google.com
2022-09-26scripts/kallsyms: Ignore __kcfi_typeid_Sami Tolvanen1-0/+1
The compiler generates __kcfi_typeid_ symbols for annotating assembly functions with type information. These are constants that can be referenced in assembly code and are resolved by the linker. Ignore them in kallsyms. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-3-samitolvanen@google.com
2022-09-24Makefile.debug: re-enable debug info for .S filesNick Desaulniers1-10/+11
Alexey reported that the fraction of unknown filename instances in kallsyms grew from ~0.3% to ~10% recently; Bill and Greg tracked it down to assembler defined symbols, which regressed as a result of: commit b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1") In that commit, I allude to restoring debug info for assembler defined symbols in a follow up patch, but it seems I forgot to do so in commit a66049e2cf0e ("Kbuild: make DWARF version a choice") Link: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=31bf18645d98b4d3d7357353be840e320649a67d Fixes: b8a9092330da ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1") Reported-by: Alexey Alexandrov <aalexand@google.com> Reported-by: Bill Wendling <morbo@google.com> Reported-by: Greg Thelen <gthelen@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-24Makefile.debug: set -g unconditional on CONFIG_DEBUG_INFO_SPLITNick Desaulniers1-3/+1
Dmitrii, Fangrui, and Mashahiro note: Before GCC 11 and Clang 12 -gsplit-dwarf implicitly uses -g2. Fix CONFIG_DEBUG_INFO_SPLIT for gcc-11+ & clang-12+ which now need -g specified in order for -gsplit-dwarf to work at all. -gsplit-dwarf has been mutually exclusive with -g since support for CONFIG_DEBUG_INFO_SPLIT was introduced in commit 866ced950bcd ("kbuild: Support split debug info v4") I don't think it ever needed to be. Link: https://lore.kernel.org/lkml/20220815013317.26121-1-dmitrii.bundin.a@gmail.com/ Link: https://lore.kernel.org/lkml/CAK7LNARPAmsJD5XKAw7m_X2g7Fi-CAAsWDQiP7+ANBjkg7R7ng@mail.gmail.com/ Link: https://reviews.llvm.org/D80391 Cc: Andi Kleen <ak@linux.intel.com> Reported-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com> Reported-by: Fangrui Song <maskray@google.com> Reported-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-24Kconfig: remove unused function 'menu_get_root_menu'Zeng Heng2-6/+0
There is nowhere calling `menu_get_root_menu` function, so remove it. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-24scripts/clang-tools: remove unused moduleyangxingwu1-1/+0
Remove unused imported 'os' module. Signed-off-by: yangxingwu <xingwu.yang@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-31/+2
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20selinux: remove runtime disable message in the install_policy.sh scriptPaul Moore1-2/+1
We are in the process of deprecating the runtime disable mechanism, let's not reference it in the scripts. Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-09-20selinux: use "grep -E" instead of "egrep"Greg Kroah-Hartman1-1/+1
The latest version of grep claims that egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this by using "grep -E" instead. Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Eric Paris <eparis@parisplace.org> Cc: selinux@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [PM: tweak to remove vdso reference, cleanup subj line] Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-09-11checkpatch: handle FILE pointer typeMickaël Salaün1-1/+5
When using a "FILE *" type, checkpatch considers this an error: ERROR: need consistent spacing around '*' (ctx:WxV) #32: FILE: f.c:8: +static void a(FILE *const b) ^ Fix this by explicitly defining "FILE" as a common type. This is useful for user space patches. With this patch, we now get: <E> <E> <_>WS( ) <E> <E> <_>IDENT(static) <E> <V> <_>WS( ) <E> <V> <_>DECLARE(void ) <E> <T> <_>FUNC(a) <E> <V> <V>PAREN('(') <EV> <N> <_>DECLARE(FILE *const ) <EV> <T> <_>IDENT(b) <EV> <V> <_>PAREN(')') -> V <E> <V> <_>WS( ) 32 > . static void a(FILE *const b) 32 > EEVVVVVVVTTTTTVNTTTTTTTTTTTTVVV 32 > ______________________________ Link: https://lkml.kernel.org/r/20220902111923.1488671-1-mic@digikod.net Link: https://lore.kernel.org/r/20220902111923.1488671-1-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11checkpatch: add kmap and kmap_atomic to the deprecated listIra Weiny1-0/+2
kmap() and kmap_atomic() are being deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap's pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. kmap_local_page() is safe from any context and is therefore redundant with kmap_atomic() with the exception of any pagefault or preemption disable requirements. However, using kmap_atomic() for these side effects makes the code less clear. So any requirement for pagefault or preemption disable should be made explicitly. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored. Link: https://lkml.kernel.org/r/20220813220034.806698-1-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11scripts/decodecode: improve faulting line determinationBorislav Petkov1-15/+105
There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11Merge tag 'kbuild-fixes-v6.0-2' of ↵Linus Torvalds3-31/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Remove unused scripts/gcc-ld script - Add zstd support to scripts/extract-ikconfig - Check 'make headers' for UML - Fix scripts/mksysmap to ignore local symbols * tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: mksysmap: Fix the mismatch of 'L0' symbols in System.map kbuild: disable header exports for UML in a straightforward way scripts/extract-ikconfig: add zstd compression support scripts: remove obsolete gcc-ld script
2022-09-10mksysmap: Fix the mismatch of 'L0' symbols in System.mapYouling Tang1-1/+1
When System.map was generated, the kernel used mksysmap to filter the kernel symbols, we need to filter "L0" symbols in LoongArch architecture. $ cat System.map | grep L0 9000000000221540 t L0 The L0 symbol exists in System.map, but not in .tmp_System.map. When "cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms data" error message in link-vmlinux.sh script. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-0/+12
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextPaolo Abeni1-7/+71
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-09-05 The following pull-request contains BPF updates for your *net-next* tree. We've added 106 non-merge commits during the last 18 day(s) which contain a total of 159 files changed, 5225 insertions(+), 1358 deletions(-). There are two small merge conflicts, resolve them as follows: 1) tools/testing/selftests/bpf/DENYLIST.s390x Commit 27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in bpf tree was needed to get BPF CI green on s390x, but it conflicted with newly added tests on bpf-next. Resolve by adding both hunks, result: [...] lru_bug # prog 'printk': failed to auto-attach: -524 setget_sockopt # attach unexpected error: -524 (trampoline) cb_refs # expected error message unexpected error: -524 (trampoline) cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc) htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline) [...] 2) net/core/filter.c Commit 1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).") from net tree conflicts with commit 29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET) to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from bpf-next tree, result: [...] if (getopt) { if (optname == SO_BINDTODEVICE) return -EINVAL; return sk_getsockopt(sk, SOL_SOCKET, optname, KERNEL_SOCKPTR(optval), KERNEL_SOCKPTR(optlen)); } return sk_setsockopt(sk, SOL_SOCKET, optname, KERNEL_SOCKPTR(optval), *optlen); [...] The main changes are: 1) Add any-context BPF specific memory allocator which is useful in particular for BPF tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov. 2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort to reuse the existing core socket code as much as possible, from Martin KaFai Lau. 3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani. 4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo. 5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF integration with the rstat framework, from Yosry Ahmed. 6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev. 7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao. 8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF backend, from James Hilliard. 9) Fix verifier helper permissions and reference state management for synchronous callbacks, from Kumar Kartikeya Dwivedi. 10) Add support for BPF selftest's xskxceiver to also be used against real devices that support MAC loopback, from Maciej Fijalkowski. 11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet. 12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu. 13) Various minor misc improvements all over the place. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits) bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc. bpf: Remove usage of kmem_cache from bpf_mem_cache. bpf: Remove prealloc-only restriction for sleepable bpf programs. bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs. bpf: Remove tracing program restriction on map types bpf: Convert percpu hash map to per-cpu bpf_mem_alloc. bpf: Add percpu allocation support to bpf_mem_alloc. bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU. bpf: Adjust low/high watermarks in bpf_mem_cache bpf: Optimize call_rcu in non-preallocated hash map. bpf: Optimize element count in non-preallocated hash map. bpf: Relax the requirement to use preallocated hash maps in tracing progs. samples/bpf: Reduce syscall overhead in map_perf_test. selftests/bpf: Improve test coverage of test_maps bpf: Convert hash map to bpf_mem_alloc. bpf: Introduce any context BPF specific memory allocator. selftest/bpf: Add test for bpf_getsockopt() bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt() bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt() bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt() ... ==================== Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-04Makefile.extrawarn: re-enable -Wformat for clang; take 2Nick Desaulniers1-0/+12
-Wformat was recently re-enabled for builds with clang, then quickly re-disabled, due to concerns stemming from the frequency of default argument promotion related warning instances. commit 258fafcd0683 ("Makefile.extrawarn: re-enable -Wformat for clang") commit 21f9c8a13bb2 ("Revert "Makefile.extrawarn: re-enable -Wformat for clang"") ISO WG14 has ratified N2562 to address default argument promotion explicitly for printf, as part of the upcoming ISO C2X standard. The behavior of clang was changed in clang-16 to not warn for the cited cases in all language modes. Add a version check, so that users of clang-16 now get the full effect of -Wformat. For older clang versions, re-enable flags under the -Wformat group that way users still get some useful checks related to format strings, without noisy default argument promotion warnings. I intentionally omitted -Wformat-y2k and -Wformat-security from being re-enabled, which are also part of -Wformat in clang-16. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Link: https://github.com/llvm/llvm-project/issues/57102 Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2562.pdf Suggested-by: Justin Stitt <jstitt007@gmail.com> Suggested-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Youngmin Nam <youngmin.nam@samsung.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-29scripts/extract-ikconfig: add zstd compression supportThitat Auareesuksakul1-0/+1
Add extract-ikconfig support for kernel images compressed with zstd. Signed-off-by: Thitat Auareesuksakul <thitat@flux.ci> Tested-by: Nicolas Schier <n.schier@avm.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-10 06:24:28 +0000