summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Add SPDX license identifier - KbuildGreg Kroah-Hartman1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209Thomas Gleixner1-1/+1
Based on 1 normalized pattern(s): released under gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 15 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.895196075@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 199Thomas Gleixner1-1/+1
Based on 1 normalized pattern(s): licensed under the terms of the gnu gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.911569875@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166Thomas Gleixner5-5/+5
Based on 1 normalized pattern(s): licensed under the terms of the gnu gpl license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 62 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-9/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner18-273/+20
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24Merge tag 'devicetree-fixes-for-5.2' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: - Update checkpatch.pl to use DT vendor-prefixes.yaml - Fix DT binding references to files converted to DT schema - Clean-up Arm CPU binding examples to match schema - Add Sifive block versioning scheme documentation - Pass binding directory base to validation tools for reference lookups * tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: checkpatch.pl: Update DT vendor prefix check dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example dt-bindings: arm: Clean up CPU binding examples dt: fix refs that were renamed to json with the same file name dt-bindings: Pass binding directory to validation tools dt-bindings: sifive: describe sifive-blocks versioning
2019-05-24Merge tag 'spdx-5.2-rc2-2' of ↵Linus Torvalds3-23/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pule more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98 ...
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 54Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is a part of the linux kernel and may be freely copied under the terms of the gnu general public license gpl version 2 or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.118952876@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public licence as published by the free software foundation either version 2 of the licence or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 114 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-23Merge tag 'docs-5.2-fixes' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation fixes from Jonathan Corbet: "A handful of fixes for a docs build problem, along with catching the spdxcheck.py script up with the current state of affairs" * tag 'docs-5.2-fixes' of git://git.lwn.net/linux: Documentation: kdump: fix minor typo scripts/spdxcheck.py: Add dual license subdirectory scripts/spdxcheck.py: Fix path to deprecated licenses counter: fix Documentation build error due to incorrect source file name
2019-05-22checkpatch.pl: Update DT vendor prefix checkRob Herring1-2/+2
In commit 8122de54602e ("dt-bindings: Convert vendor prefixes to json-schema"), vendor-prefixes.txt has been converted to a DT schema. Update the checkpatch.pl DT check to extract vendor prefixes from the new vendor-prefixes.yaml file. Fixes: 8122de54602e ("dt-bindings: Convert vendor prefixes to json-schema") Cc: Joe Perches <joe@perches.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-22dt-bindings: Pass binding directory to validation toolsRob Herring1-1/+1
In order to have $ref's to schema files within the kernel, we need to pass the base path of bindings to the schema validation tools. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-21Merge tag 'spdx-5.2-rc2' of ↵Linus Torvalds15-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...
2019-05-21scripts/spdxcheck.py: Add dual license subdirectorySven Eckelmann1-1/+1
The licenses from the other directory were partially moved to the dual directory in commit 8ea8814fcdcb ("LICENSES: Clearly mark dual license only licenses"). checkpatch therefore rejected files like drivers/staging/android/ashmem.h with WARNING: 'SPDX-License-Identifier: GPL-2.0 OR Apache-2.0 */' is not supported in LICENSES/... #1: FILE: drivers/staging/android/ashmem.h:1: +/* SPDX-License-Identifier: GPL-2.0 OR Apache-2.0 */ Fixes: 8ea8814fcdcb ("LICENSES: Clearly mark dual license only licenses") Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner13-0/+13
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner2-0/+2
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21kbuild: do not check name uniqueness of builtin modulesMasahiro Yamada1-3/+3
I just thought it was a good idea to scan builtin.modules in the name uniqueness checking, but a couple of false positives were found. Stephen reported a false positive for ppc64_defconfig: warning: same basename if the following are built as modules: arch/powerpc/platforms/powermac/nvram.ko drivers/char/nvram.ko The former is never built as a module as you see in arch/powerpc/platforms/powermac/Makefile: # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y obj-$(CONFIG_NVRAM:m=y) += nvram.o Another example of false positive is arm64 defconfig: warning: same basename if the following are built as modules: arch/arm64/lib/crc32.ko lib/crc32.ko It is true CONFIG_CRC32 is a tristate option but it is always 'y' since it is select'ed by ARM64. Hence, neither of them is built as a module for the arm64 build. From the above, modules.builtin essentially contains false positives. I do not think it is a big deal as far as kmod is concerned, but false positive warnings in the kernel build make people upset. It is better to not check it. Even without builtin.modules checked, we have enough (and more solid) test coverage with allmodconfig. While I touched this part, I replaced the sed code with neater one provided by Stephen. Link: https://lkml.org/lkml/2019/5/19/120 Link: https://lkml.org/lkml/2019/5/19/123 Fixes: 3a48a91901c5 ("kbuild: check uniqueness of module names") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20scripts/spdxcheck.py: Fix path to deprecated licensesSven Eckelmann1-1/+1
The directory name for other licenses was changed to "deprecated" in commit 62be257e986d ("LICENSES: Rename other to deprecated"). But it was not changed for spdxcheck.py. As result, checkpatch failed with FAIL: "Blob or Tree named 'other' not found" Traceback (most recent call last): File "scripts/spdxcheck.py", line 240, in <module> spdx = read_spdxdata(repo) File "scripts/spdxcheck.py", line 41, in read_spdxdata for el in lictree[d].traverse(): File "/usr/lib/python2.7/dist-packages/git/objects/tree.py", line 298, in __getitem__ return self.join(item) File "/usr/lib/python2.7/dist-packages/git/objects/tree.py", line 244, in join raise KeyError(msg % file) KeyError: "Blob or Tree named 'other' not found" Fixes: 62be257e986d ("LICENSES: Rename other to deprecated") Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-21kbuild: drop support for cc-ldoptionNick Desaulniers1-5/+0
If you want to see if your linker supports a certain flag, then ask the linker directly with ld-option (not the compiler with cc-ldoption). Checking for linker flag support is an antipattern that complicates the usage of various linkers other than bfd via -fuse-ld={bfd|gold|lld}. Cc: clang-built-linux@googlegroups.com Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-19kconfig: use 'else ifneq' for Makefile to improve readabilityMasahiro Yamada1-3/+1
'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81 or later, which is the requirement for building the kernel since commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81"). Use it to improve the readability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: check uniqueness of module namesMasahiro Yamada1-0/+16
In the recent build test of linux-next, Stephen saw a build error caused by a broken .tmp_versions/*.mod file: https://lkml.org/lkml/2019/5/13/991 drivers/net/phy/asix.ko and drivers/net/usb/asix.ko have the same basename, and there is a race in generating .tmp_versions/asix.mod Kbuild has not checked this before, and it suddenly shows up with obscure error messages when this kind of race occurs. Non-unique module names cause various sort of problems, but it is not trivial to catch them by eyes. Hence, this script. It checks not only real modules, but also built-in modules (i.e. controlled by tristate CONFIG option, but currently compiled with =y). Non-unique names for built-in modules also cause problems because /sys/modules/ would fall over. For the latest kernel, I tested "make allmodconfig all" (or more quickly "make allyesconfig modules"), and it detected the following: warning: same basename if the following are built as modules: drivers/regulator/88pm800.ko drivers/mfd/88pm800.ko warning: same basename if the following are built as modules: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko warning: same basename if the following are built as modules: drivers/net/phy/asix.ko drivers/net/usb/asix.ko warning: same basename if the following are built as modules: fs/coda/coda.ko drivers/media/platform/coda/coda.ko warning: same basename if the following are built as modules: drivers/net/phy/realtek.ko drivers/net/dsa/realtek.ko Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2019-05-18kconfig: Terminate menu blocks with a comment in the generated configAlexander Popov1-1/+12
Currently menu blocks start with a pretty header but end with nothing in the generated config. So next config options stick together with the options from the menu block. Let's terminate menu blocks in the generated config with a comment and a newline if needed. Example: ... CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # CONFIG_NET_PKTGEN=y CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options CONFIG_HAMRADIO=y ... Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: remove 'addtree' and 'flags' magic for header search pathsMasahiro Yamada3-33/+13
The 'addtree' and 'flags' in scripts/Kbuild.include are so compilecated and ugly. As I mentioned in [1], Kbuild should stop automatic prefixing of header search path options. I fixed up (almost) all Makefiles in the kernel. Now 'addtree' and 'flags' have been removed. Kbuild still caters to add $(srctree)/$(src) and $(objtree)/$(obj) to the header search path for O= building, but never touches extra compiler options from ccflags-y etc. [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada3-7/+7
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: terminate Kconfig when $(CC) or $(LD) is missingMasahiro Yamada1-0/+8
If the compiler specified by $(CC) is not present, the Kconfig stage sprinkles 'not found' messages, then succeeds. $ make CROSS_COMPILE=foo defconfig /bin/sh: 1: foogcc: not found /bin/sh: 1: foogcc: not found *** Default configuration is based on 'x86_64_defconfig' ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found init/Kconfig:16:warning: 'GCC_VERSION': number is invalid # # configuration written to .config # Terminate parsing files immediately if $(CC) or $(LD) is not found. "make *config" will fail more nicely. $ make CROSS_COMPILE=foo defconfig *** Default configuration is based on 'x86_64_defconfig' scripts/Kconfig.include:34: compiler 'foogcc' not found make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1 make: *** [Makefile;557: defconfig] Error 2 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: add all Clang-specific flags unconditionallyMasahiro Yamada1-6/+6
We do not support old Clang versions. Upgrade your clang version if any of these flags is unsupported. Let's add all flags inside ifdef CONFIG_CC_IS_CLANG unconditionally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-05-18kbuild: add some extra warning flags unconditionallyMasahiro Yamada1-6/+7
These flags are documented in the GCC 4.6 manual, and recognized by Clang as well. Let's rip off the cc-option / cc-disable-warning switches. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-05-15Merge tag 'kconfig-v5.2' of ↵Linus Torvalds8-45/+89
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - error out if a user specifies a directory instead of a file from "Save" menu of GUI interfaces - do not overwrite .config if there is no change in the configuration - create parent directories as needed when a user specifies a new file path from "Save" menu of menuconfig/nconfig - fix potential buffer overflow - some trivial cleanups * tag 'kconfig-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: make conf_get_autoconfig_name() static kconfig: use snprintf for formatting pathnames kconfig: remove useless NULL pointer check in conf_write_dep() kconfig: make parent directories for the saved .config as needed kconfig: do not write .config if the content is the same kconfig: do not accept a directory for configuration output kconfig: remove trailing whitespaces kconfig: Make nconf-cfg.sh executable
2019-05-14scripts/gdb: print cached rate in lx-clk-summaryLeonard Crestez2-7/+18
The clk rate is always stored in clk_core but might be out of date and require calls to update from hardware. Deal with that case by printing a (c) suffix. Link: http://lkml.kernel.org/r/1a474318982a5f0125f2360c4161029b17f56bd1.1556881728.git.leonard.crestez@nxp.com Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: clean up error handling in list helpersLeonard Crestez1-8/+2
An incorrect argument to list_for_each is an internal error in gdb scripts so a TypeError should be raised. The gdb.GdbError exception type is intended for user errors such as incorrect invocation. Drop the type assertion in list_for_each_entry because list_for_each isn't going to suddenly yield something else. Applies to both list and hlist Link: http://lkml.kernel.org/r/c1d3fd4db13d999a3ba57f5bbc1924862d824f61.1556881728.git.leonard.crestez@nxp.com Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: add $lx_clk_core_lookup functionLeonard Crestez1-0/+23
Finding an individual clk_core requires walking the tree which can be quite complicated so add a helper for easy access. (gdb) print *(struct clk_scu*)$lx_clk_core_lookup("uart0_clk")->hw Link: http://lkml.kernel.org/r/Message-ID: Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: initial clk support: lx-clk-summaryLeonard Crestez2-0/+47
Add an lx-clk-summary command which prints a subset of /sys/kernel/debug/clk/clk_summary. This can be used to examine hangs caused by clk not being enabled. Link: http://lkml.kernel.org/r/Message-ID: Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: add hlist utilitiesLeonard Crestez1-0/+23
This allows easily examining kernel hlists in python. Link: http://lkml.kernel.org/r/Message-ID: Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: silence pep8 checksStephen Boyd5-5/+16
These scripts have some pep8 style warnings. Fix them up so that this directory is all pep8 clean. Link: http://lkml.kernel.org/r/20190329220844.38234-6-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: add a timer list commandStephen Boyd3-0/+233
Implement a command to print the timer list, much like how /proc/timer_list is implemented. This can be used to look at the pending timers on a crashed system. [swboyd@chromium.org: v2] Link: http://lkml.kernel.org/r/20190329220844.38234-5-swboyd@chromium.org Link: http://lkml.kernel.org/r/20190325184522.260535-5-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: add rb tree iterating utilitiesStephen Boyd2-0/+178
Implement gdb functions for rb_first(), rb_last(), rb_next(), and rb_prev(). These can be useful to iterate through the kernel's red-black trees. [swboyd@chromium.org: v2] Link: http://lkml.kernel.org/r/20190329220844.38234-4-swboyd@chromium.org Link: http://lkml.kernel.org/r/20190325184522.260535-4-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: add kernel config dumping commandStephen Boyd2-0/+45
lx-configdump <file> dumps the contents of the gzipped .config to a text file when the config is included in the kernel with CONFIG_IKCONFIG. By default, the file written is called config.txt, but it can be any user supplied filename as well. If the kernel config is in a module (configs.ko), then it can be loaded along with symbols for the module loaded with 'lx-symbols' and then this command will still work. Obviously if you have the whole vmlinux then this can also be achieved with scripts/extract-ikconfig, but this gdb script can be useful to confirm that the memory contents of the config in memory and the vmlinux contents on disk match what is expected. [swboyd@chromium.org: v2] Link: http://lkml.kernel.org/r/20190329220844.38234-3-swboyd@chromium.org Link: http://lkml.kernel.org/r/20190325184522.260535-3-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14scripts/gdb: find vmlinux where it was beforeStephen Boyd1-1/+5
Patch series "gdb script for kconfig and timer list". This is a handful of changes to the kernel's gdb scripts to do some more debugging with kgdb. The first patch allows the vmlinux to be reloaded from where it was specified on the command line so that this set of scripts can be used from anywhere. The second patch adds a script to dump the config.gz to a file on the host debugging machine. The third patch adds some rb tree utilities and the last patch uses those rb tree walking utilities to dump out the contents of /proc/timer_list from a system under debug. This patch (of 5): If I run 'gdb <path/to/vmlinux>' and there's the vmlinux-gdb.py file there I can properly see symbols and use the lx commands provided by the GDB scripts. But once I run 'lx-symbols' at the command prompt, gdb reloads the vmlinux symbols assuming that this script was run from the directory that has vmlinux at the root. That isn't always true, but we could just look and see what symbols were already loaded and use that instead. Let's do that so this can work by being invoked anywhere. Link: http://lkml.kernel.org/r/20190325184522.260535-2-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14kconfig: make conf_get_autoconfig_name() staticMasahiro Yamada2-2/+1
This is only used in confdata.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-14kconfig: use snprintf for formatting pathnamesJacob Garber2-2/+3
Valid pathnames will never exceed PATH_MAX, but these file names are unsanitized and can cause buffer overflow if set incorrectly. Use snprintf to avoid this. This was flagged during a Coverity scan of the coreboot project, which also uses kconfig for its build system. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-14kconfig: remove useless NULL pointer check in conf_write_dep()Masahiro Yamada1-2/+0
conf_write_dep() has just one caller: conf_write_dep("include/config/auto.conf.cmd"); "name" always points to a valid string. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-13Merge tag 'gcc-plugins-v5.2-rc1' of ↵Linus Torvalds1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugin fix from Kees Cook: "Fix ARM stack-protector-per-task plugin build for older GCC < 6 (Chris Packham)" * tag 'gcc-plugins-v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: arm_ssp_per_task_plugin: Fix for older GCC < 6
2019-05-13bpf: fix script for generating man page on BPF helpersQuentin Monnet1-4/+4
The script broke on parsing function prototype for bpf_strtoul(). This is because the last argument for the function is a pointer to an "unsigned long". The current version of the script only accepts "const" and "struct", but not "unsigned", at the beginning of argument types made of several words. One solution could be to add "unsigned" to the list, but the issue could come up again in the future (what about "long int"?). It turns out we do not need to have such restrictions on the words: so let's simply accept any series of words instead. Reported-by: Yonghong Song <yhs@fb.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-10gcc-plugins: arm_ssp_per_task_plugin: Fix for older GCC < 6Chris Packham1-1/+1
Use gen_rtx_set instead of gen_rtx_SET. The former is a wrapper macro that handles the difference between GCC versions implementing the latter. This fixes the following error on my system with g++ 5.4.0 as the host compiler HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o scripts/gcc-plugins/arm_ssp_per_task_plugin.c:42:14: error: macro "gen_rtx_SET" requires 3 arguments, but only 2 given mask)), ^ scripts/gcc-plugins/arm_ssp_per_task_plugin.c: In function ‘unsigned int arm_pertask_ssp_rtl_execute()’: scripts/gcc-plugins/arm_ssp_per_task_plugin.c:39:20: error: ‘gen_rtx_SET’ was not declared in this scope emit_insn_before(gen_rtx_SET Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Fixes: 189af4657186 ("ARM: smp: add support for per-task stack canaries") Cc: stable@vger.kernel.org Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2019-05-11kconfig: make parent directories for the saved .config as neededMasahiro Yamada3-3/+5
With menuconfig / nconfig, users can input any file path from the "Save" menu, but it fails if the parent directory does not exist. Why not create the parent directory automatically. I think this is a user-friendly behavior. I changed the error messages in menuconfig / nconfig. "Nonexistent directory" is no longer the most likely reason of the failure. Perhaps, the user specified the existing directory, or attempted to write to the location without write permission. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-11kconfig: do not write .config if the content is the sameMasahiro Yamada1-0/+54
Kconfig updates the .config when it exits even if its content is exactly the same as before. Since its timestamp becomes newer than that of other build artifacts, additional processing is invoked, which is annoying. - syncconfig is invoked to update include/config/auto.conf, etc. - kernel/configs.o is recompiled if CONFIG_IKCONFIG is enabled, then vmlinux is relinked as well. If the .config is not changed at all, we do not have to even touch it. Just bail out showing "No change to .config". $ make allmodconfig scripts/kconfig/conf --allmodconfig Kconfig # # configuration written to .config # $ make allmodconfig scripts/kconfig/conf --allmodconfig Kconfig # # No change to .config # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-11kconfig: do not accept a directory for configuration outputMasahiro Yamada1-34/+24
Currently, conf_write() can be called with a directory name instead of a file name. As far as I see, this can happen for menuconfig, nconfig, gconfig. If it is given with a directory path, conf_write() kindly appends getenv("KCONFIG_CONFIG"), but this ends up with hacky dir/basename handling, and screwed up in corner-cases like "what if KCONFIG_CONFIG is an absolute path?" as discussed before: https://patchwork.kernel.org/patch/9910037/ Since conf_write() is already messed up, I'd say "do not do it". Please pass a file path all the time. If a directory path is specified for the configuration output, conf_write() will simply error out. Now that the tmp file is created in the same directory as the .config, the previously reported "what if KCONFIG_CONFIG points to a different file system?" has been solved. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nicolas Porcel <nicolasporcel06@gmail.com>
2019-05-09kconfig: remove trailing whitespacesMasahiro Yamada2-2/+2
There are still some trailing whitespaces under scripts/kconfig/tests/, but they must be kept. Otherwise, "make testconfig" would break. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 05:52:00 +0000