summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2015-04-02kbuild: include $(src)/Makefile rather than $(obj)/MakefileMasahiro Yamada2-2/+2
This commit actually has no impact because $(src) and $(obj) point to the same path, but $(src)/Makefile looks better when we include source files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-02kbuild: use relative path to include MakefileMasahiro Yamada2-2/+2
The "MAKEFLAGS += --include-dir=$(srctree)" line in the top Makefile allows us to do this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-31MIPS: Add CDMM bus supportJames Hogan2-0/+19
Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in the standard Linux device model. Each device attached via CDMM is discoverable via an 8-bit type identifier and may contain a number of blocks of memory mapped registers in the CDMM region. IRQs are expected to be handled separately. Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices, all the driver callbacks take place from workqueues which are run on the right CPU for the device in question, so that the driver doesn't need to be as concerned about which CPU it is running on. Callbacks also exist for when CPUs are taken offline, so that any per-CPU resources used by the driver can be disabled so they don't get forcefully migrated. CDMM devices are created as children of the CPU device they are attached to. Any existing CDMM configuration by the bootloader will be inherited, however platforms wishing to enable CDMM should implement the weak mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver knows where it should put the CDMM region in the physical address space if the bootloader hasn't already enabled it. A mips_cdmm_early_probe() function is also provided to allow early boot or particularly low level code to set up the CDMM region and probe for a specific device type, for example early console or KGDB IO drivers for the EJTAG Fast Debug Channel (FDC) CDMM device. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9599/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-25irqf_oneshot.cocci: add check of devm_request_threaded_irq()Valentin Rothberg1-0/+24
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. Until now, this coccinelle script only checked request_threaded_irq(). However, the counterpart devm function (see kernel/irq/devres.c) is also affected by the missing flag which can be detected with this patch. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24kbuild: add generic mergeconfig target, %.configMasahiro Yamada1-10/+9
"scripts/kconfig/merge_config.sh && make oldconfig" works well enough for merging local config fragments, but Kbuild currently has the entry points only for "kvmconfig" and "tinyconfig". This commit provides the generic target for mergeconfig, so we can manage our own config fragments easily: put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/, and then run "make foo.config". Now "make kvmconfig" is just a shorthand of "make kvm_guest.config". Likewise, "make tinyconfig" is equivalent to "make allnoconfig tiny.config". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24merge_config.sh: rename MAKE to RUNMAKEMasahiro Yamada1-3/+3
The variable "MAKE" is used to store the command name that has invoked the Makefile. (Actually, it is already set to "make" if you run this script from a Makefile.) In this script, however, it is used to determine if Make should be run or not. It is not what we usually expect. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24merge_config.sh: improve indentationMasahiro Yamada1-8/+6
It is true that we do not want to move the code too far to the right, but something like below is not preferred: if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then echo Value of $CFG is redefined by fragment $MERGE_FILE: echo Previous value: $PREV_VAL echo New value: $NEW_VAL echo elif [ "$WARNREDUN" = "true" ]; then echo Value of $CFG is redundant by fragment $MERGE_FILE: fi To fix this, call "continue" if the "grep" command fails to find the given CONFIG. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24kbuild: mergeconfig: remove redundant $(objtree)Masahiro Yamada1-1/+1
Kbuild always runs in $(objtree). Actually, $(objtree) is always set to "." by the top-level Makefile. We can omit "-O $(objtree)" and "$(objtree)/". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24kbuild: mergeconfig: move an error check to merge_config.shMasahiro Yamada2-1/+5
Currently, "make tinyconfig" does not work with "-j" option. $ make mrproper $ make -j8 tinyconfig HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf --allnoconfig Kconfig # # configuration written to .config # scripts/kconfig/Makefile:122: *** You need an existing .config for this target. Stop. make: *** [tinyconfig] Error 2 As shown above, "allnoconfig" has created the .config file before mergeconfig is called, but Make still raises a false alarm because of some sort of race condition. We can fix this issue by moving the error check to the shell script. Anyway, scripts/kconfig/merge_config.sh always requires an existing .config as a base file. It is reasonable to check its existence in the shell script. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24kbuild: mergeconfig: fix "jobserver unavailable" warningMasahiro Yamada1-1/+1
If "make kvmconfig" is run with "-j" option, a warning message, "jobserver unavailable: using -j1. Add `+' to parent make rule.", is displayed. $ make -s defconfig *** Default configuration is based on 'x86_64_defconfig' # # configuration written to .config # $ make -j8 kvmconfig Using ./.config as base Merging ./arch/x86/configs/kvm_guest.config [ snip ] # # merged configuration written to ./.config (needs make) # make[2]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. scripts/kconfig/conf --oldconfig Kconfig [ snip ] # # configuration written to .config # Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24checkkconfigsymbols.py: fix sorted outputValentin Rothberg1-5/+7
Commit b1a3f243485f ("checkkconfigsymbols.py: make it Git aware") mistakenly removed to print undefined Kconfig symbols in alphabetical order. Furthermore, the script does not print anything anymore when the entire tree is checked (i.e., when no commit is specified). This patch restores the sorted output and adds the missing print for the default case. Additionally, the file lists are now sorted as well which (a) makes it easier to read and (b) makes the output deterministic. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16checkkconfigsymbols.py: make it Git awareValentin Rothberg1-6/+132
The script now supports to check a specified commit or a specified range of commits (i.e., commit1..commit2). Developers and maintainers are encouraged to use this functionality before sending or merging patches to avoid potential bugs and to keep the code, documentation, etc. clean. This patch adds the following options to the script: -c COMMIT, --commit=COMMIT Check if the specified commit (hash) introduces undefined Kconfig symbols. -d DIFF, --diff=DIFF Diff undefined symbols between two commits. The input format bases on Git log's 'commmit1..commit2'. --force Reset current Git tree even when it's dirty. Note that the first two options require to 'git reset --hard' the user's Git tree. This hard reset is necessary to keep the script fast, but it can lead to the loss of uncommitted data. Hence, the script aborts in case it is executed in a dirty tree. It won't abort if '--force' is passed. If neither -c nor -d is specified, the script defaults to check the entire local tree (i.e., the previous behavior). Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16xen: build infrastructure for generating hypercall depending symbolsJuergen Gross1-0/+12
Today there are several places in the kernel which build tables containing one entry for each possible Xen hypercall. Create an infrastructure to be able to generate these tables at build time. Based-on-patch-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-09checkkconfigsymbols.py: filter reports for tools/Valentin Rothberg1-3/+4
Recent changes to the build system of tools suggest to filter reports for the entire tools directory. Various C preprocessor identifiers are prefixed with CONFIG_ but are NOT defined in Kconfig but in Makefiles in the tools directory. Such identifiers are false positives for most static analysis tools (i.e., scripts/checkkconfigsymbols.py) since the CONFIG_ prefix and the _MODULE suffix is reserved for Kconfig features in CPP and Make syntax. Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-28scripts/gdb: add empty package initialization scriptJan Kiszka1-0/+1
This got lost during the initial merge process: Python requires an __init__.py script, even if empty, in order to accept a directory as package. Add it, this time as a non-empty file. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-25kconfig: Remove unnecessary prototypes from headersMichal Marek7-48/+40
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25kconfig: Remove dead codeMichal Marek4-39/+0
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25kconfig: Get rid of the P() macro in headersMichal Marek2-47/+43
This was originally meant for dlopen()ing a potential kconfig shared library. The unused dlopen code has already been removed in commit 5a6f8d2b (kconfig: nuke LKC_DIRECT_LINK cruft), so let's remove the rest. The lkc_proto.h change was made with the following sed script: sed -r 's/^P\(([^,]*), *([^,]*), *(.*)\);/\2 \1\3;/' Plus some manual adjustments. Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25kconfig: fix a misspelling in scripts/kconfig/merge_config.shMasahiro Yamada1-1/+1
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-19Merge branch 'misc' of ↵Linus Torvalds1-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild changes from Michal Marek: "Just a few non-critical kbuild changes: - builddeb adds the actual distribution name in the changelog - documentation fixes" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: trivial - fix the help doc of CONFIG_CC_OPTIMIZE_FOR_SIZE kbuild: Update documentation of clean-files and clean-dirs builddeb: Try to determine distribution builddeb: Update year and git repository URL in debian/copyright
2015-02-19Merge branch 'kbuild' of ↵Linus Torvalds2-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - several cleanups in kbuild - serialize multiple *config targets so that 'make defconfig kvmconfig' works - The cc-ifversion macro got support for an else-branch * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild,gcov: simplify kernel/gcov/Makefile more kbuild: allow cc-ifversion to have the argument for false condition kbuild,gcov: simplify kernel/gcov/Makefile kbuild,gcov: remove unnecessary workaround kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion kbuild: fix cc-ifversion macro kbuild: drop $(version_h) from MRPROPER_FILES kbuild: use mixed-targets when two or more config targets are given kbuild: remove redundant line from bounds.h/asm-offsets.h kbuild: merge bounds.h and asm-offsets.h rules kbuild: Drop support for clean-rule
2015-02-17scripts/gdb: disable pagination while printing from breakpoint handlerJan Kiszka1-0/+11
While reporting the (refreshed) list of modules on automatic updates we may hit the page boundary of the output console and cause a stop if pagination is enabled. However, gdb does not accept user input while running over the breakpoint handler. So we get stuck, and the user is forced to interrupt gdb. Resolve this by disabling pagination during automatic symbol updates. We restore the user's configuration once done. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: convert CpuList to generator functionJan Kiszka2-40/+33
Yet another code simplification. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: convert ModuleList to generator functionJan Kiszka2-23/+12
Analogously to the task list, convert the module list to a generator function. It noticeably simplifies the code. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: use a generator instead of iterator for task listDaniel Wagner1-30/+20
The iterator does not return any task_struct from the thread_group list because the first condition in the 'if not t or ...' will only be the first time None. Instead of keeping track of the state ourself in the next() function, we fall back using Python's generator. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: ignore byte-compiled python filesDaniel Thompson1-0/+2
Using the gdb scripts leaves byte-compiled python files in the scripts/ directory. These should be ignored by git. [jan.kiszka@siemens.com: drop redundant mrproper rule as suggested by Michal] Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: port to python3 / gdb7.7Pantelis Koukousoulas6-9/+18
I tried to use these scripts in an ubuntu 14.04 host (gdb 7.7 compiled against python 3.3) but there were several errors. I believe this patch fixes these issues so that the commands now work (I tested lx-symbols, lx-dmesg, lx-lsmod). Main issues that needed to be resolved: * In python 2 iterators have a "next()" method. In python 3 it is __next__() instead (so let's just add both). * In older python versions there was an implicit conversion in object.__format__() (used when an object is in string.format()) where it was converting the object to str first and then calling str's __format__(). This has now been removed so we must explicitly convert to str the objects for which we need to keep this behavior. * In dmesg.py: in python 3 log_buf is now a "memoryview" object which needs to be converted to a string in order to use string methods like "splitlines()". Luckily memoryview exists in python 2.7.6 as well, so we can convert log_buf to memoryview and use the same code in both python 2 and python 3. This version of the patch has now been tested with gdb 7.7 and both python 3.4 and python 2.7.6 (I think asking for at least python 2.7.6 is a reasonable requirement instead of complicating the code with version checks etc). Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add lx-lsmod commandJan Kiszka1-1/+45
This adds a lsmod-like command to list all currently loaded modules of the target. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add class to iterate over CPU masksJan Kiszka1-0/+54
Will be used first to count module references. It is optimized to read the mask only once per stop. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add lx_current convenience functionJan Kiszka1-0/+17
This is a shorthand for *$lx_per_cpu("current_task"), i.e. a convenience function to retrieve the currently running task of the active context. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add internal helper and convenience function for per-cpu lookupJan Kiszka2-0/+69
This function allows to obtain a per-cpu variable, either of the current or an explicitly specified CPU. Note: sparc64 version is untested. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add get_gdbserver_type helperJan Kiszka1-0/+35
This helper probes the type of the gdb server. Supported are QEMU and KGDB so far. Knowledge about the gdb server is required e.g. to retrieve the current CPU or current task. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add internal helper and convenience function to retrieve ↵Jan Kiszka1-0/+35
thread_info Add the internal helper get_thread_info that calculates the thread_info from a given task variable. Also export this service as a convenience function. Note: ia64 version is untested. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add is_target_arch helperJan Kiszka1-0/+13
This helper caches to result of "show architecture" and matches the provided arch (sub-)string against that output. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add helper and convenience function to look up tasksJan Kiszka2-0/+28
Add the helper task_by_pid that can look up a task by its PID. Also export it as a convenience function. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add task iteration classJan Kiszka1-0/+46
This class allows to iterate over all tasks of the target. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add lx-dmesg commandJan Kiszka2-0/+65
This pokes into the log buffer of the debugged kernel, dumping it to the gdb console. Helping in case the target should or can no longer execute dmesg itself. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add read_u16/32/64 helpersJan Kiszka1-0/+21
Add helpers for reading integers from target memory buffers. Required when caching the memory access is more efficient than reading individual values via gdb. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add get_target_endianness helperJan Kiszka1-0/+18
Parse the target endianness from the output of "show endian" and cache the result to return it via the new helper get_target_endiannes. We will need it for reading integers from buffers that contain target memory. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add internal helper and convenience function to look up a moduleJan Kiszka2-0/+29
Add the internal helper get_module_by_name to obtain the module structure corresponding to the given name. Also export this service as a convenience function. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add automatic symbol reloading on module insertionJan Kiszka1-0/+39
This installs a silent breakpoint on the do_init_module function. The breakpoint handler will try to load symbols from the module files found during lx-symbols execution. This way, breakpoints can be set to module initialization functions, and there is no need to explicitly call lx-symbols after (re-)loading a module. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add lx-symbols commandJan Kiszka2-0/+128
This is probably the most useful helper when debugging kernel modules: lx-symbols first reloads vmlinux. Then it searches recursively for *.ko files in the specified paths and the current directory. Finally it walks the kernel's module list, issuing the necessary add-symbol-file command for each loaded module so that gdb knows which module symbol corresponds to which address. It also looks up variable sections (bss, data, rodata) and appends their address to the add-symbole-file command line. This allows to access global module variables just like any other variable. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add module iteration classJan Kiszka1-0/+39
Will soon be used for loading symbols, printing global variables or listing modules. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add container_of helper and convenience functionJan Kiszka2-0/+37
Provide an internal helper with container_of semantics. As type lookups are very slow in gdb-python and we need a type "long" for this, cache the reference to this type object. Then export the helper also as a convenience function form use at the gdb command line. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add cache for type objectsJan Kiszka1-0/+34
Type lookups are very slow in gdb-python which is often noticeable when iterating over a number of objects. Introduce the helper class CachedType that keeps a reference to a gdb.Type object but also refreshes it after an object file has been loaded. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17scripts/gdb: add infrastructureJan Kiszka4-0/+36
This provides the basic infrastructure to load kernel-specific python helper scripts when debugging the kernel in gdb. The loading mechanism is based on gdb loading for <objfile>-gdb.py when opening <objfile>. Therefore, this places a corresponding link to the main helper script into the output directory that contains vmlinux. The main scripts will pull in submodules containing Linux specific gdb commands and functions. To avoid polluting the source directory with compiled python modules, we link to them from the object directory. Due to gdb.parse_and_eval and string redirection for gdb.execute, we depend on gdb >= 7.2. This feature is enabled via CONFIG_GDB_SCRIPTS. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Michal Marek <mmarek@suse.cz> [kbuild stuff] Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16vfs,ext2: remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAXMatthew Wilcox1-1/+0
The fewer Kconfig options we have the better. Use the generic CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13kasan: enable instrumentation of global variablesAndrey Ryabinin1-1/+1
This feature let us to detect accesses out of bounds of global variables. This will work as for globals in kernel image, so for globals in modules. Currently this won't work for symbols in user-specified sections (e.g. __init, __read_mostly, ...) The idea of this is simple. Compiler increases each global variable by redzone size and add constructors invoking __asan_register_globals() function. Information about global variable (address, size, size with redzone ...) passed to __asan_register_globals() so we could poison variable's redzone. This patch also forces module_alloc() to return 8*PAGE_SIZE aligned address making shadow memory handling ( kasan_module_alloc()/kasan_module_free() ) more simple. Such alignment guarantees that each shadow page backing modules address space correspond to only one module_alloc() allocation. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13kernel: add support for .init_array.* constructorsAndrey Ryabinin1-0/+3
KASan uses constructors for initializing redzones for global variables. Globals instrumentation in GCC 4.9.2 produces constructors with priority (.init_array.00099) Currently kernel ignores such constructors. Only constructors with default priority supported (.init_array) This patch adds support for constructors with priorities. For kernel image we put pointers to constructors between __ctors_start/__ctors_end and do_ctors() will call them on start up. For modules we merge .init_array.* sections into resulting .init_array. Module code properly handles constructors in .init_array section. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 15:26:07 +0000