| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tested with 2.12i and 2.13-pre2.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Local symbols generated by gcc start with a `$'; no point in including them
in the kernel.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch changes the way the compression algorithm works. The base
algorithm is similiar to the previous but we force the compressed token
size to 2.
Having a fixed size compressed token allows for a lot of optimizations, and
that in turn allows this code to run over *all* the symbols faster than it
did before over just a subset.
Having it work over all the symbols will make it behave better when symbols
change positions between passes, and the "inconsistent kallsyms" messages
should become less frequent.
In my tests the compression ratio was degraded by about 0.5%, but the
results will depend greatly on the number of symbols to compress.
Signed-off-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
|
|
The 'make update-po-config' creates the .pot file for the default arch. This
patch enhances it with all arch.
Signed-off-by: Egry Gabor <gaboregry@t-online.hu>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The end of line character doesn't exist on end of help in all case, check it
first.
Signed-off-by: Egry Gabor <gaboregry@t-online.hu>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The gettext doesn't handle the {CONFIG}:00000 markers as sources. I added a
simple comment prefix for them.
Signed-off-by: Egry Gabor <gaboregry@t-online.hu>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make MODULE_DEVICE_TABLE work for vio devices.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
GLIBC 2.3.4 and later changed the STT_REGISTER macro to
STT_SPARC_REGISTER, so we need to cope with that somehow.
Original patch from fabbione, reposted by Ben Collins.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
upon the git commit
If CONFIG_AUTO_LOCALVERSION is set, the user is using a git-based tree, and the
current HEAD is not referred to by any tags in .git/refs/tags/, append -g and
the first 8 characters of the commit to the version string. This makes it
easier to use git-bisect, and/or to do a daily build, without trampling on your
older, working builds, or accidentally setting up conflicting sets of modules.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
I ran glade-2 on the glade file, fixed two missing stock icons and
cleaned up the C code that inserts the single/split/full modes. The
rest of the patch is minor cleanups only. I refrained from using all
the included xpm icons in images.c (like qconf.cc does) in favour of
using the stock Gtk+ icons instead. Oh, yes there was a "back" bug
in split mode that I also removed, oh well...
It has been tested with success by several people, including
Jesper Juhl, Randy Dunlap and myself.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Replace all menu_add_prop mimicking menu_add_prompt with the latter func. I've
had to add a return value to menu_add_prompt for one usage.
I've rebuilt scripts/kconfig/zconf.tab.c_shipped by hand to reflect changes
in the source (I've not the same Bison version so regenerating it wouldn't
have been not a good idea), and compared it with what Roman itself did some
time ago, and it's the same.
So I guess this can be finally merged.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This time I did not break anything... and they shut up gcc4 ;)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Quiet some silly warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
kbuild failed to locate Makefile for external modules.
This brought to my attention how the variables for directories
have different values in different usage scenarios.
Different kbuild usage scenarios:
make - plain make in same directory where kernel source lives
make O= - kbuild is told to store output files in another directory
make M= - building an external module
make O= M= - building an external module with kernel output seperate from src
Value assigned to the different variables:
|$(src) |$(obj) |$(srctree) |$(objtree)
make |reldir to k src |as src |abs path to k src |abs path to k src
make O= |reldir to k src |as src |abs path to k src |abs path to output dir
make M= |abs path to src |as src |abs path to k src |abs path to k src
make O= M= |abs path to src |as src |abs path to k src |abs path to k output
path to kbuild file:
make | $(srctree)/$(src), $(src)
make O= | $(srctree)/$(src)
make M= | $(src)
make O= M= | $(src)
From the table above it can be seen that the only good way to find the
home directory of the kbuild file is to locate the one of the two variants
that is an absolute path. If $(src) is an absolute path (starts with /)
then use it, otherwise prefix $(src) with $(srctree).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Defining clean before including the kbuild file give us knowledge when
the kbuild file is included for cleaning. This is rarey usefull - but in
a corner case in klibc this proved necessary.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
|
|
kbuild failed to locate Kbuild.include.
Teach kbuild how to find Kbuild files when using make O=...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
|
|
Kbuild.include is a placeholder for definitions originally present in
both the top-level Makefile and scripts/Makefile.build.
There were a slight difference in the filechk definition, so the most videly
used version was kept and usr/Makefile was adopted for this syntax.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
|
|
There was only two users left of descend. Fix them so they
use $(clean)= and $(build)=.
Drop definition of descend.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
|
|
This fixes kbuild make help binrpm-pkg missing `''.
Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
directories
From: Ryan Anderson <ryan@michonline.com>
When running "make O=something deb-pkg", I get a failure that claims I
haven't configured my kernel (I have). Running it a second time tells
me to run "make mrproper" (include/linux/version.h got built on the
first run)
Original patch from:
From: Ajay Patel <patela@gmail.com>
With modifications from:
Signed-off-By: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
From: Ryan Anderson <ryan@michonline.com>
This pulls the description from the Debian user-mode-linux package, and
puts $version back in the appropriate places for both descriptions.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
From: Ryan Anderson <ryan@michonline.com>
Make the deb-pkg build target understand the "um" arch and set up the
package and directory structure to match a mainline-Debian style
user-mode-linux package.
This is primarily so that it stops matching, exactly, the naming
convention used by normal, non-UML kernels generated by this command.
Installing "linux-2.6.11" and "linux-2.6.11", where one is a UML kernel
doesn't do the right thing. This fixes that.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
From: Randy Dunlap <rddunlap@osdl.org>
I should not have added init.text test here;
it's more than useless, it actually degrades the output.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
From: Matt Mackall <mpm@selenic.com>
Add PREEMPT to UTS_VERSION where enabled as is done for SMP to make
preempt kernels easily identifiable.
Added SMP PREEMPT as comment in compile.h to force it to be
updated when they change (sam).
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
From: Randy Dunlap <rddunlap@osdl.org>
Reduce noise in 'make buildcheck' that is caused by CONFIG_DEBUG_INFO=y.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
From: Matthew Wilcox <matthew@wil.cx>
I inadvertently built a tree as root and then rebuilt it as a user. I
got a lot of prompts ...
mv: overwrite `drivers/char/drm/drm_auth.o', overriding mode 0644?
Using mv -f fixes that.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Current kernel-doc (perl) script generates this warning:
Use of uninitialized value in concatenation (.) or string at scripts/kernel-doc line 1668.
So explicitly check for SRCTREE in the ENV before using it,
and then if it is set, append a '/' to the end of it, otherwise
the SRCTREE + filename can (will) be missing the intermediate '/'.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
When I recently submitted a Lindent patch, it turned out that my .indent.pro
options were also applied to the tree. This patch directs indent(1) to ignore
the .indent.pro directives and only use options specified on the command
line.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This patch fixes the output of "make help" to fit in a 80 column
screen. Please push upstream as part of your other patches.
Signed-off-by: Yum Rayan <yum.rayan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Single-file HOSTCC calls added the libraries from $(HOSTLOADLIBES),
but not from $(HOSTLOADLIBES_programname). Multi-file HOSTCC calls do
both.
This patch fixes that inconsistency.
Signed-Off-By: Matthias Urlichs <smurf@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
On ia64, only the EFI (fat) partition is available to boot from. The rpm
needs to install the kernel under /boot/efi to be useable on ia64.
Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
When I recently submitted a Lindent patch, it turned out that my .indent.pro
options were also applied to the tree. This patch directs indent(1) to ignore
the .indent.pro directives and only use options specified on the command
line.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Recently a change in the glibc elf.h header has been introduced causing
modpost to spawn tons of warnings (like the one below) building the kernel
on sparc:
[SNIP]
*** Warning: "current_thread_info_reg" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
*** Warning: "" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
*** Warning: "" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
[SNIP]
Ben Collins discovered that the STT_REGISTERED definition in glibc did change
and that this change needs to be propagated to modpost.
glibc change:
-#define STT_REGISTER 13 /* Global register reserved to app. */
+#define STT_SPARC_REGISTER 13 /* Global register reserved to app. */
I did and tested this simple patch to maintain compatibility with newer (>= 2.3.4)
and older (<= 2.3.2) glibc.
Signed-off-by: Fabio M. Di Nitto <fabbione@fabbione.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
It adds tarball packaging, which I prefer for distribution.
Also one of the two blanks after @echo is removed. One seems to be enough :)
Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This converts the usage of struct of_match to struct of_device_id,
similar to pci_device_id. This allows a device table to be generated,
which can be parsed by depmod(8) to generate a map file for module
loading.
In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied. Those patches are
available at:
ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Create PCMCIA entries in modules.alias
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
scripts/ is full of mismatches between char* params an signed char* arguments,
and viceversa. gcc4 now complaints loud about this. Patch below deletes all
those 'signed'.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This is failing on my cross-compilation environment (From a solaris system)
using gcc-3.4.1 (as the compiler can't find a prototype for the setlocale()
function).
Signed-off-by: Jean-Christophe Dubois <jdubois@mc.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
gconfig: only show scrollbars if needed (which is more user friendly):
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Adding quotation handling to rule_cc_o_c in scripts/Makefile.build as used
elsewhere.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add better support for (non-incremental) 2.6.x.y patches; If an ending
version number if not specified, the script automatically increments the
SUBLEVEL (x in 2.6.x.y) until no more patch files are found; however,
EXTRAVERSION (y in 2.6.x.y) is never automatically incremented but must be
specified fully.
patch-kernel does not normally support reverse patching, but does so when
applying EXTRAVERSION (x.y) patches, so that moving from 2.6.11.y to
2.6.11.z is easy and handled by the script (reverse 2.6.11.y and apply
2.6.11.z).
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The PPC32 kernel puts platform-specific functions into separate sections so
that unneeded parts of it can be freed when we've booted and actually
worked out what we're running on today.
This makes kallsyms ignore those functions, because they're not between
_[se]text or _[se]inittext. Rather than teaching kallsyms about the
various pmac/chrp/etc sections, this patch adds '_[se]extratext' markers
for kallsyms.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch adds i18n support for make *config, allowing users to have the
config process in their own language.
No printk was harmed in the process, don't worry, so all the bug reports,
kernel messages, etc, remain in english, just the user tools to configure
the kernel are internationalized.
Users not interested in translations can just unset the related LANG,
LC_ALL, etc env variables and have the config process in plain english,
something like:
LANG= make menuconfig
is enough for having the whole config process in english. Or just don't
install any translation file.
Translations for brazilian portuguese are being done by a team of
volunteers at:
http://www.visionflex.inf.br/kernel_ptbr/pmwiki.php/Principal/Traducoes
To start the translation process:
make update-po-config
This will generate the pot template named scripts/kconfig/linux.pot,
copy it to, say, ~/es.po, to start the translation for spanish.
To test your translation, as root issue this command:
msgfmt -o /usr/share/locale/es/LC_MESSAGES/linux.mo ~/es.po
Replace "es" with your language code.
Then execute, for instance:
make menuconfig
The current patch doesn't use any optimization to reduce the size of the
generated .mo file, it is possible to use the config option as a key, but
this doesn't prevent the current patch from being used or the translations
done under the current scheme to be in any way lost if we chose to do any
kind of keying.
Thanks to Fabricio Vaccari for starting the pt_BR (brazilian portuguese)
translation effort, Thiago Maciera for helping me with the gconf.cc (QT
frontent) i18n coding and to all the volunteers that are already working on
the first translation, to pt_BR.
I left the question on whether to ship the translations with the stock kernel
sources to be discussed here, please share your suggestions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org
Signed-off-by: Andrew Morton <akpm@osdl.org>
|
|
xmlto uses standared XSLT templates to generate manpages, (x)html pages, and
XML FO files which can be processed with passivetex. This is much faster than
using jadetex for everything. This patch also reduces the number of
kernel-specific scripts that are needed to generate documentation.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This fix is needed to create valid XML.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
I have recompiled Linux kernel 2.6.11.5 documentation for me and our
university students again. The documentation could be extended for more
sources which are equipped by structured comments for recent 2.6 kernels. I
have tried to proceed with that task. I have done that more times from 2.6.0
time and it gets boring to do same changes again and again. Linux kernel
compiles after changes for i386 and ARM targets. I have added references to
some more files into kernel-api book, I have added some section names as well.
So please, check that changes do not break something and that categories are
not too much skewed.
I have changed kernel-doc to accept "fastcall" and "asmlinkage" words reserved
by kernel convention. Most of the other changes are modifications in the
comments to make kernel-doc happy, accept some parameters description and do
not bail out on errors. Changed <pid> to @pid in the description, moved some
#ifdef before comments to correct function to comments bindings, etc.
You can see result of the modified documentation build at
http://cmp.felk.cvut.cz/~pisa/linux/lkdb-2.6.11.tar.gz
Some more sources are ready to be included into kernel-doc generated
documentation. Sources has been added into kernel-api for now. Some more
section names added and probably some more chaos introduced as result of quick
cleanup work.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
kallsyms does not consider SYMBOL_PREFIX of C. Consequently it does not
work on architectures using that prefix character (h8300, v850).
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Another attempt at that...
The attached patch fixes the longstanding problem with USB bcdDevice
numeric ranges incorrectly converted into patterns for MODULE_ALIAS
generation. Previously it put both the lower and the upper limits into
the pattern, dlXdhY, making it impossible to fnmatch against except for
a few special cases, like dl*dh* or dlXdhX.
The patch makes it generate multiple MODULE_ALIAS lines covering the
whole range with fnmatch-able patterns. E.g. for a range between 0x0001
and 0x8345 it gives the following patterns:
000[1-9]
00[1-9]*
0[1-9]*
[1-7]*
8[0-2]*
83[0-3]*
834[0-5]
Since bcdDevice is 2 bytes wide = 4 digits in hex representation, the
max no. of patters is 2 * 4 - 1 = 7.
The values are BCD (binary-coded decimals) and not hex, so patterns
using a dash seem to be safe regardless of locale collation order.
The patch changes bcdDevice part of the alias from dlXdhY to dZ, but
this shouldn't have big compatibility issues because fnmatch()-based
modprobing hasn't yet been widely used. Besides, the most common (and
almost the only working) case of dl*dh* becomes d* and thus continues to
work.
The patch is against 2.6.12-rc2, applies to -mm3 with an offset. The
matching patch to fix the MODALIAS environment variable now generated by
the usb hotplug function follows.
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
