Age | Commit message (Collapse) | Author | Files | Lines |
|
Kallsyms data is never written to, so it can as well benefit from
CONFIG_DEBUG_RODATA.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (156 commits)
[PATCH] x86-64: Export smp_call_function_single
[PATCH] i386: Clean up smp_tune_scheduling()
[PATCH] unwinder: move .eh_frame to RODATA
[PATCH] unwinder: fully support linker generated .eh_frame_hdr section
[PATCH] x86-64: don't use set_irq_regs()
[PATCH] x86-64: check vector in setup_ioapic_dest to verify if need setup_IO_APIC_irq
[PATCH] x86-64: Make ix86 default to HIGHMEM4G instead of NOHIGHMEM
[PATCH] i386: replace kmalloc+memset with kzalloc
[PATCH] x86-64: remove remaining pc98 code
[PATCH] x86-64: remove unused variable
[PATCH] x86-64: Fix constraints in atomic_add_return()
[PATCH] x86-64: fix asm constraints in i386 atomic_add_return
[PATCH] x86-64: Correct documentation for bzImage protocol v2.05
[PATCH] x86-64: replace kmalloc+memset with kzalloc in MTRR code
[PATCH] x86-64: Fix numaq build error
[PATCH] x86-64: include/asm-x86_64/cpufeature.h isn't a userspace header
[PATCH] unwinder: Add debugging output to the Dwarf2 unwinder
[PATCH] x86-64: Clarify error message in GART code
[PATCH] x86-64: Fix interrupt race in idle callback (3rd try)
[PATCH] x86-64: Remove unwind stack pointer alignment forcing again
...
Fixed conflict in include/linux/uaccess.h manually
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Be more careful about function pointer args:
look for "(...*" instead of just "(".
This line in include/linux/input.h fools the current kernel-doc script
into deciding that this is a function pointer:
unsigned long ffbit[NBITS(FF_MAX)];
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
scripts/ver_linux needed some minor clean-ups, as follows:
1) Add reporting of actual oprofile release
2) Add reporting of actual wireless-tools release
3) Add reporting of actual pcmciautils release
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Might make qconf compilable with qt-3.1 as well as qt-3.3
Cc: greg chesson <xtp@google.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
changes
o On some platforms like avr32, section init comes before .text and
not necessarily a symbol's relative position w.r.t _text is positive.
In such cases assembler detects the overflow and emits warning. This
patch fixes it.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
|
|
It turns out that the most called ops, by several orders of magnitude,
are the interrupt manipulation ops. These are obvious candidates for
patching, so mark them up and create infrastructure for it.
The method used is that the ops structure has a patch function, which
is called for each place which needs to be patched: this returns a
number of instructions (the rest are NOP-padded).
Usually we can spare a register (%eax) for the binary patched code to
use, but in a couple of critical places in entry.S we can't: we make
the clobbers explicit at the call site, and manually clobber the
allowed registers in debug mode as an extra check.
And:
Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT.
And:
AK: Fix warnings in x86-64 alternative.c build
And:
AK: Fix compilation with defconfig
And:
^From: Andrew Morton <akpm@osdl.org>
Some binutlises still like to emit references to __stop_parainstructions and
__start_parainstructions.
And:
AK: Fix warnings about unused variables when PARAVIRT is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
|
|
Print the addresses of non-absolute symbols relative to _text
so that ld will generate relocations. Allowing a relocatable
kernel to relocate them. We can't actually use the symbol names
because kallsyms includes static symbols that are not exported
from their object files.
Add the _text symbol definitions to the architectures which don't
define it otherwise linker will fail.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
|
|
On Mon, 13 Nov 2006, Phil Oester wrote:
> In commit 350b5b76384e77bcc58217f00455fdbec5cac594, the default menuconfig
> color scheme was changed to bluetitle. This breaks the highlighting
> of the selected item for me with TERM=vt100. The only way I can see
> which item is selected is via:
>
> make MENUCONFIG_COLOR=mono menuconfig
>
> Which restores the pre-2.6.19 white on black highlighting.
Fix.
Cc: Phil Oester <kernel@linuxace.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fixes a segfault reported by Randy.
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix bug 7401.
Handle more than one source dir or file list to the initramfs gen scripts.
The Kconfig help for INITRAMFS_SOURCE claims that you can specify multiple
space-separated sources in order to allow unprivileged users to build an
image. There are two bugs in the current implementation that prevent this
from working.
First, we pass "file1 dir2" to the gen_initramfs_list.sh script, which it
obviously can't open.
Second, gen_initramfs_list.sh -l outputs multiple definitions for
deps_initramfs -- one for each argument.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Prevent git from reporting this useless status:
On branch refs/heads/master
Untracked files:
(use "git add" to add to commit)
TAGS
scripts/kconfig/lkc_defs.h
scripts/kconfig/qconf.moc
nothing to commit
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Correct a few comments in kernel-doc Doc and source files.
(akpm: note: the patch removes a non-ascii character and might have to be
applied by hand..)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch adds support for feature fixups in modules. This involves
adding support for R_PPC64_REL64 relocs to the 64 bits module loader.
It also modifies modpost.c to ignore the powerpc fixup sections (or it
would warn when used in .init.text).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Some people want to do crazy things like pass multiple directories as the
value of $(SUBDIRS) or $M. Mostly this kinda works, except that
Makefile.modpost constructs a modpost commandline which fails modpost's
argument parsing. This patch fixes that little wrinkle.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix this:
make[3]: *** No rule to make target
`/mnt/md0/devel/linux-git/include/linux/version.h', needed by
`/mnt/md0/devel/linux-git-obj/usr/include/linux/version.h'. Stop.
make[2]: *** [linux] Error 2
make[1]: *** [headers_install] Error 2
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
- In parameter descriptions, strip all whitespace between the parameter
name (e.g., @len) and its description so that the description is
indented uniformly in text and man page modes. Previously, spaces
or tabs (which are used for cleaner source code viewing) affected
the produced output in a negative way.
Before (man mode):
to Destination address, in user space.
from Source address, in kernel space.
n Number of bytes to copy.
After (man mode):
to Destination address, in user space.
from Source address, in kernel space.
n Number of bytes to copy.
- Fix/clarify a few function description comments.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Drop __inline, __always_inline, and noinline in the produced kernel-doc
output, similar to other pseudo directives.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
scripts/kconfig/lxdialog/util.c fails to build because it uses
true/false without including stdbool.h:
kronos:~/src/linux-2.6$ make O=../linux-build-git menuconfig
GEN /home/kronos/src/linux-build/Makefile
HOSTCC scripts/kconfig/lxdialog/util.o
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_classic_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: (Each undeclared identifier is reported only once
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: for each function it appears in.)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:70: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_blackbg_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:101: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:102: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_bluetitle_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:144: error: 'true' undeclared (first use in this function)
make[2]: *** [scripts/kconfig/lxdialog/util.o] Error 1
make[1]: *** [menuconfig] Error 2
make: *** [menuconfig] Error 2
Add <stdbool.h> to dialog.h to fix the breakage.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Don't require that scripts/hdrcheck.sh be executable - shit happens...
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This is obviously copied from some lines before without proper fixing.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
kbuild: trivial documentation fixes
kconfig: fix saving alternate kconfig file in parent dir
kbuild: make modpost processing configurable
kconfig/menuconfig: do not let ncurses clutter screen on exit
kconfig/lxdialog: clear long menu lines
kbuild: do not build mconf & lxdialog unless needed
kconfig/lxdialog: fix make mrproper
kconfig/lxdialog: support resize
kconfig/lxdialog: let <ESC><ESC> behave as expected
kconfig/menuconfig: lxdialog is now built-in
kconfig/lxdialog: add a new theme bluetitle which is now default
kconfig/lxdialog: add support for color themes and add blackbg theme
kconfig/lxdialog: refactor color support
|
|
This seems to have been missed when unifdef went in
via Sam's tree..
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This fixes bugzilla entry: 7182
http://bugzilla.kernel.org/show_bug.cgi?id=7182
With this patch we no longer append the directory part twice
before saving the config file.
This patch has been sent to Roman Zippel for review with no feedback.
It is so obviously simple that this should be OK to apply it anyway.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
On request from Al Viro make modpost processing configurable.
KBUILD_MODPOST_WARN can be set to make modpost warn instead of
error out in case on unresolved symbols in final module link.
KBUILD_MODPOST_NOFINAL can be set to avoid the final and timeconsuming
.c file generation and link of .ko files. This is solely useful for
speeding up when doing compile checks with for example allmodconfig
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The driver for /proc/config.gz consumes rather a lot of memory and it is in
fact possible to build it as a module.
In some ways this is a bit risky, because the .config which is used for
compiling kernel/configs.c isn't necessarily the same as the .config which was
used to build vmlinux.
But OTOH the potential memory savings are decent, and it'd be fairly dumb to
build your configs.o with a different .config.
Signed-off-by: Andrew Morton <akpm@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Do not initialize ncurses twice - it causes unpredicable
results. My display was sometimes weird after running
make menuconfig and I had to execute 'reset' to properly
restore my display.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Menulines that were wider than the available
line width is now properly null terminated.
While at it renamed the variable choice => line_y
so it better reflect the usage in do_print_item().
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Due to a limitation in kbuild all objects referred
by xxx-y or xxx-objs will be build when one of
the targets needs to e build.
This caused lxdialog to be build pulling in ncurses
that is not always available.
So avoid building mconf & lxdialog unless really needed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
No Makefile in scripts/kconfig/lxdialog anymore, so do not
go there during make mrproper.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
In all dialogs now properly catch KEY_RESIZE and take proper action.
In mconf try to behave sensibly when a dialog routine returns
-ERRDISPLAYTOOSMALL.
The original check for a screnn size of 80x19 is kept for now.
It may make sense to remove it later, but thats anyway what
much text is adjusted for.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
<ESC><ESC> is used to step one back in the dialogs.
When lxdialog became built-in pressing <ESC> once would cause one step back
and pressing <ESC><ESC> would cause two steps back.
This patch - based on concept from Roman Zippel <zippel@linux-m68k.org> -
makes one <ESC> a noop and pressing <ESC><ESC> will cause one step backward.
In addition the final yes/no dialog now has the option to go back to the
the kernel configuration. So if you get too far out you can now go back
to configuring the kernel without saving and starting all over again.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
lxdialog was previously called as an external program causing screen
to flicker when used. With this patch lxdialog is now built-in.
It is loosly based om previous work by: Petr Baudis <pasky@ucw.cz>
Following is a list of changes:
o Moved build of dialog routings to kconfig Makefile
o menubox + checklist uses a new item list to hold all menu items
o in util.c implmented helper function to deal with item list
o menubox now uses parameters to save scroll state (avoids temp file)
o textbox now get text to be displayed as parameter and not a file
o make sure to properly delete subwin's before main windows
o killed unused files: lxdialog.c msgbox.c
o modified return value for ESC to match direct calling
o in a few places the code has been adjusted to 80 char wide
o in textbox a small refactoring was made to make code remotely readable
o in mconf removed all unused stuff (functions/variables)
Following is a list of know short comings:
a) pressing ESC twice will be interpreted as two ESC presses
b) resize does not work. menuconfig needs to be restarted to be adjusted
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The bluetitle theme is a slightly modified version of the colorscheme
that -mm users has been used to. The bluetitle is more readable especially
on some LCD screens so it is now default.
Anyone that really wants the old color selection can get it by selecting
the classic color theme:
make MENUCONFIG_COLOR=classic menuconfig
The bluetitle theme was modified by Roman Zippel <zippel@linux-m68k.org>
to further improve readability on LCD screens.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The blackbg theme was originally made by: Han Boetes
It was copied from a patch by "Randy.Dunlap" <rdunlap@xenotime.net>
which was also the inspiration source for the color theme support.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Clean up and refactor color support. All color support are now
in util.c including color definitions.
In the process introduced a global variable named 'dlg' which is
used all over to set color - thats the reason why all files are changed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Adds a missing exit, if the file that should be parsed couldn't be opened.
Without it crashes with a segfault, cause the filedescriptor is accessed
even if the file could not be opened.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add modalias attribute support for the almost forgotten now EISA bus and
(at least some) EISA-aware modules.
The modalias entry looks like (for an 3c509 NIC):
eisa:sTCM5093
and the in-module alias like:
eisa:sTCM5093*
The patch moves struct eisa_device_id declaration from include/linux/eisa.h
to include/linux/mod_devicetable.h (so that the former now #includes the
latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all
drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE
declared), and adds recognision of __mod_eisa_device_table to
scripts/mod/file2alias.c so that proper modules.alias will be generated.
There's no support for /lib/modules/$kver/modules.eisamap, as it's not used
by any existing tools, and because with in-kernel modalias mechanism those
maps are obsolete anyway.
The rationale for this patch is:
a) to make EISA bus to act as other busses with modalias
support, to unify driver loading
b) to foget about EISA finally - with this patch, kernel
(who still supports EISA) will be the only one who knows
how to choose the necessary drivers for this bus ;)
[akpm@osdl.org: fix the kbuild bit]
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org>
Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Current gcc generates calls not jumps to noreturn functions. When that happens the
return address can point to the next function, which confuses the unwinder.
This patch works around it by marking asynchronous exception
frames in contrast normal call frames in the unwind information. Then teach
the unwinder to decode this.
For normal call frames the unwinder now subtracts one from the address which avoids
this problem. The standard libgcc unwinder uses the same trick.
It doesn't include adjustment of the printed address (i.e. for the original
example, it'd still be kernel_math_error+0 that gets displayed, but the
unwinder wouldn't get confused anymore.
This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16
unfortunately because earlier binutils don't support .cfi_signal_frame
[AK: added automatic detection of the new binutils and wrote description]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
|
|
Add a feature check that checks that the gcc compiler has stack-protector
support and has the bugfix for PR28281 to make this work in kernel mode.
The easiest solution I could find was to have a shell script in scripts/
to do the detection; if needed we can make this fancier in the future
without making the makefile too complex.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
CC: Andi Kleen <ak@suse.de>
CC: Sam Ravnborg <sam@ravnborg.org>
|
|
... instead of using a CONFIG option. The config option still controls
if the resulting executable actually has unwind information.
This is useful to prevent compilation errors when users select
CONFIG_STACK_UNWIND on old binutils and also allows to use
CFI in the future for non kernel debugging applications.
Cc: jbeulich@novell.com
Cc: sam@ravnborg.org
Signed-off-by: Andi Kleen <ak@suse.de>
|
|
* git://git.infradead.org/~dwmw2/khdrs-2.6:
New 'make headers_install_all' target.
Use dependencies for 'make headers_install'.
[S390] Unexport <asm/z90crypt.h>, export <asm/zcrypt.h> in its place.
Remove dead netfilter_logging.h from include/linux/Kbuild
Remove offsetof() from user-visible <linux/stddef.h>
Clean up exported headers on CRIS
Fix v850 exported headers
Don't advertise (or allow) headers_{install,check} where inappropriate.
Remove UML header export
Remove ARM26 header export.
Fix H8300 exported headers.
Fix m68knommu exported headers
Fix exported headers for SPARC, SPARC64
Fix 'make headers_check' on m32r
Fix 'make headers_check' on sh64
Fix 'make headers_check' on sh
[HEADERS] Fix ARM 'make headers_check'
Initial pass of manual conflict resolution in top-level Makefile over
conflicting build rule and headers_install changes.
|
|
"mkdir -p" does not only mean not to complain if the directory already
exists, but also to create the parent directories if needed. This patch
removes "lib" from the list of directories to create as we will also create
"lib/modules".
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
At stage 2 modpost utility is used to check modules. In case of unresolved
symbols modpost only prints warning.
IMHO it is a good idea to fail compilation process in case of unresolved
symbols (at least in modules coming with kernel), since usually such errors
are left unnoticed, but kernel modules are broken.
- new option '-w' is added to modpost:
if option is specified, modpost only warns about unresolved symbols
- modpost is called with '-w' for external modules in Makefile.modpost
Signed-off-by: Andrey Mirkin <amirkin@sw.ru>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
hostprogs-y only supported creating output directory for the final
program. Extend this to also cover the situation where a .o
file (used when host program is made from compositie objects) is
locate in another directory.
First user of this is the built-in lxdialog that.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Noticed by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
tell why a a target got build
enabled by make V=2
Output (listed in the order they are checked):
(1) - due to target is PHONY
(2) - due to target missing
(3) - due to: file1.h file2.h
(4) - due to command line change
(5) - due to missing .cmd file
(6) - due to target not in $(targets)
(1) We always build PHONY targets
(2) No target, so we better build it
(3) Prerequisite is newer than target
(4) The command line stored in the file named dir/.target.cmd
differed from actual command line. This happens when compiler
options changes
(5) No dir/.target.cmd file (used to store command line)
(6) No dir/.target.cmd file and target not listed in $(targets)
This is a good hint that there is a bug in the kbuild file
This patch is inspired by a patch from: Milton Miller <miltonm@bga.com>
Cc: Milton Miller <miltonm@bga.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Based on patch from: Magnus Damm <magnus@valinux.co.jp>
This has the advantage that all section mismatch checks are run regardless
of modules being enabled or not.
When running modpost on vmlinux output:
MODPOST vmlinux
When running modpost on modules output count of modules like this:
MODPOST 5 modules
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|