summaryrefslogtreecommitdiffstats
path: root/scripts/mod
AgeCommit message (Collapse)AuthorFilesLines
2019-03-28kbuild: modversions: Fix relative CRC byte order interpretationFredrik Noring1-1/+1
Fix commit 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs") where CRCs are interpreted in host byte order rather than proper kernel byte order. The bug is conditional on CONFIG_MODULE_REL_CRCS. For example, when loading a BE module into a BE kernel compiled with a LE system, the error "disagrees about version of symbol module_layout" is produced. A message such as "Found checksum D7FA6856 vs module 5668FAD7" will be given with debug enabled, which indicates an obvious endian problem within __kcrctab within the kernel image. The general solution is to use the macro TO_NATIVE, as is done in similar cases throughout modpost.c. With this correction it has been verified that a BE kernel compiled with a LE system accepts BE modules. This change has also been verified with a LE kernel compiled with a LE system, in which case TO_NATIVE returns its value unmodified since the byte orders match. This is by far the common case. Fixes: 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs") Signed-off-by: Fredrik Noring <noring@nocrew.org> Cc: stable@vger.kernel.org Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-14modpost: always show verbose warning for section mismatchMasahiro Yamada1-22/+5
Unless CONFIG_DEBUG_SECTION_MISMATCH is enabled, modpost only shows the number of section mismatches. If you want to know the symbols causing the issue, you need to rebuild with CONFIG_DEBUG_SECTION_MISMATCH. It is tedious. I think it is fine to show annoying warning when a new section mismatch comes in. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-10Merge tag 'platform-drivers-x86-v5.1-1' of ↵Linus Torvalds2-1/+30
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: - use MODULE_DEVICE_TABLE across several wmi drivers, keeping wmi_device_id and MODULE_ALIAS() declarations in sync - add several Ideapad models to the no_hw_rfkill list - add support for new Mellanox platforms, including new fan and LED functionality - address Dell keyboard backlight change event and power button release issues - update dell_rbu to use appropriate memory allocation mechanisms - several small fixes and Ice Lake support for intel_pmc_core - fix a suspend regression for Cherry Trail based devices in intel_int0002_vgpio - a few other routine fixes * tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits) MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list platform/x86: mlx-platform: Fix access mode for fan_dir attribute platform/x86: mlx-platform: Add UID LED for the next generation systems platform/x86: mlx-platform: Add extra CPLD for next generation systems platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE() platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h modpost: file2alias: define size of alias platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown platform/x86: intel_pmc_core: Add Package cstates residency info platform/x86: intel_pmc_core: Add ICL platform support ...
2019-03-07platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()Mattias Jacobsson2-0/+25
The kernel provides the macro MODULE_DEVICE_TABLE() where driver authors can specify their device type and their array of device_ids and thereby trigger the generation of the appropriate MODULE_ALIAS() output. This is opposed to having to specify one MODULE_ALIAS() for each device. The WMI device type is currently not supported. While using MODULE_DEVICE_TABLE() does increase the complexity as well as spreading out the implementation across the kernel, it does come with some benefits too; * It makes different drivers look more similar; if you can specify the array of device_ids any device type specific input to MODULE_ALIAS() will automatically be generated for you. * It helps each driver avoid keeping multiple versions of the same information in sync. That is, both the array of device_ids and the potential multitude of MODULE_ALIAS()'s. Add WMI support to MODULE_DEVICE_TABLE() by adding info about struct wmi_device_id in devicetable-offsets.c and add a WMI entry point in file2alias.c. The type argument for MODULE_DEVICE_TABLE(type, name) is wmi. Suggested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: wmi: move struct wmi_device_id to mod_devicetable.hMattias Jacobsson1-0/+1
In preparation for adding WMI support to MODULE_DEVICE_TABLE() move the definition of struct wmi_device_id to mod_devicetable.h and inline guid_string in the struct. Changing guid_string to an inline char array changes the loop conditions when looping over an array of struct wmi_device_id. Therefore update wmi_dev_match()'s loop to check for an empty guid_string instead of a NULL pointer. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> [dvhart: Move UUID_STRING_LEN define to this patch] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-06modpost: file2alias: define size of aliasMattias Jacobsson1-1/+4
The size of the variable alias provided to do_entry functions are currently not readily available. Thus hindering do_entry functions to perform bounds checking. Define the macro ALIAS_SIZE containing the size of the variable alias. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-01tee: add bus driver framework for TEE based devicesSumit Garg2-0/+22
Introduce a generic TEE bus driver concept for TEE based kernel drivers which would like to communicate with TEE based devices/services. Also add support in module device table for these new TEE based devices. In this TEE bus concept, devices/services are identified via Universally Unique Identifier (UUID) and drivers register a table of device UUIDs which they can support. So this TEE bus framework registers following apis: - match(): Iterates over the driver UUID table to find a corresponding match for device UUID. If a match is found, then this particular device is probed via corresponding probe api registered by the driver. This process happens whenever a device or a driver is registered with TEE bus. - uevent(): Notifies user-space (udev) whenever a new device is registered on this bus for auto-loading of modularized drivers. Also this framework allows for device enumeration to be specific to corresponding TEE implementation like OP-TEE etc. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-01-09x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINEWANG Chao1-1/+1
Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable <stable@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn
2018-12-01kbuild: move modpost out of 'scripts' targetMasahiro Yamada1-2/+0
I am eagar to build under the scripts/ directory only with $(HOSTCC), but scripts/mod/ highly depends on the $(CC) and target arch headers. That it why the 'scripts' target must depend on 'asm-generic', 'gcc-plugins', and $(autoksyms_h). Move it to the 'prepare0' stage. I know this is a cheesy workaround, but better than the current situation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01modpost: move unresolved symbol checks to check_exports()Masahiro Yamada1-15/+18
This will fit better in check_exports() than add_versions(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01modpost: merge module iterationsMasahiro Yamada1-6/+1
Probably, this is just a matter of the order of error/warning messages. Merge the two for-loops. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01modpost: refactor seen flag clearing in add_depends()Masahiro Yamada1-6/+6
You do not need to iterate over all modules for resetting ->seen flag because add_depends() is only interested in modules that export symbols referenced from the given 'mod'. This also avoids shadowing the 'modules' parameter of add_depends(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01modpost: file2alias: check prototype of handlerMasahiro Yamada1-4/+3
Use specific prototype instead of an opaque pointer so that the compiler can catch function prototype mismatch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-12-01modpost: file2alias: go back to simple devtable lookupMasahiro Yamada1-95/+49
Commit e49ce14150c6 ("modpost: use linker section to generate table.") was not so cool as we had expected first; it ended up with ugly section hacks when commit dd2a3acaecd7 ("mod/file2alias: make modpost compile on darwin again") came in. Given a certain degree of unknowledge about the link stage of host programs, I really want to see simple, stupid table lookup so that this works in the same way regardless of the underlying executable format. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Mathieu Malaterre <malat@debian.org>
2018-12-01modpost: skip ELF local symbols during section mismatch checkPaul Walmsley1-0/+12
During development of a serial console driver with a gcc 8.2.0 toolchain for RISC-V, the following modpost warning appeared: ---- WARNING: vmlinux.o(.data+0x19b10): Section mismatch in reference from the variable .LANCHOR1 to the function .init.text:sifive_serial_console_setup() The variable .LANCHOR1 references the function __init sifive_serial_console_setup() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console ---- ".LANCHOR1" is an ELF local symbol, automatically created by gcc's section anchor generation code: https://gcc.gnu.org/onlinedocs/gccint/Anchored-Addresses.html https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/varasm.c;h=cd9591a45617464946dcf9a126dde277d9de9804;hb=9fb89fa845c1b2e0a18d85ada0b077c84508ab78#l7473 This was verified by compiling the kernel with -fno-section-anchors and observing that the ".LANCHOR1" ELF local symbol disappeared, and modpost no longer warned about the section mismatch. The serial driver code idiom triggering the warning is standard Linux serial driver practice that has a specific whitelist inclusion in modpost.c. I'm neither a modpost nor an ELF expert, but naively, it doesn't seem useful for modpost to report section mismatch warnings caused by ELF local symbols by default. Local symbols have compiler-generated names, and thus bypass modpost's whitelisting algorithm, which relies on the presence of a non-autogenerated symbol name. This increases the likelihood that false positive warnings will be generated (as in the above case). Thus, disable section mismatch reporting on ELF local symbols. The rationale here is similar to that of commit 2e3a10a1551d ("ARM: avoid ARM binutils leaking ELF local symbols") and of similar code already present in modpost.c: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/mod/modpost.c?h=v4.19-rc4&id=7876320f88802b22d4e2daf7eb027dd14175a0f8#n1256 This third version of the patch implements a suggestion from Masahiro Yamada <yamada.masahiro@socionext.com> to restructure the code as an additional pattern matching step inside secref_whitelist(), and further improves the patch description. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-21modpost: drop unused command line switchesPaul Walmsley1-1/+1
Drop modpost command line switches that are no longer used by makefile.modpost, upon request from Sam Ravnborg <sam@ravnborg.org>, who wrote: modpost is not supposed to be used outside the kernel build. [...] I checked if there were any options supported by modpost that was not configurable in Makefile.modpost. And I could see that the -M and -K options in getopt() were leftovers. The code that used these option was dropped in: commit a8773769d1a1 ("Kbuild: clear marker out of modpost") Could you add a patch that delete these on top of what you already have. https://lore.kernel.org/lkml/20181020140835.GA3351@ravnborg.org/ Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-21modpost: validate symbol names also in find_elf_symbolSami Tolvanen1-24/+26
If an ARM mapping symbol shares an address with a valid symbol, find_elf_symbol can currently return the mapping symbol instead, as the symbol is not validated. This can result in confusing warnings: WARNING: vmlinux.o(.text+0x18f4028): Section mismatch in reference from the function set_reset_devices() to the variable .init.text:$x.0 This change adds a call to is_valid_name to find_elf_symbol, similarly to how it's already used in find_elf_symbol2. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-28Merge tag 'kbuild-v4.20' of ↵Linus Torvalds1-8/+18
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - optimize kallsyms slightly - remove check for old CFLAGS usage - add some compiler flags unconditionally instead of evaluating $(call cc-option,...) - fix variable shadowing in host tools - refactor scripts/mkmakefile - refactor various makefiles * tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: Create macro to avoid variable shadowing ASN.1: Remove unnecessary shadowed local variable kbuild: use 'else ifeq' for checksrc to improve readability kbuild: remove unneeded link_multi_deps kbuild: add -Wno-unused-but-set-variable flag unconditionally kbuild: add -Wdeclaration-after-statement flag unconditionally kbuild: add -Wno-pointer-sign flag unconditionally modpost: remove leftover symbol prefix handling for module device table kbuild: simplify command line creation in scripts/mkmakefile kbuild: do not pass $(objtree) to scripts/mkmakefile kbuild: remove user ID check in scripts/mkmakefile kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile kbuild: add --include-dir flag only for out-of-tree build kbuild: remove dead code in cmd_files calculation in top Makefile kbuild: hide most of targets when running config or mixed targets kbuild: remove old check for CFLAGS use kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionally kallsyms: remove left-over Blackfin code kallsyms: reduce size a little on 64-bit
2018-10-29modpost: Create macro to avoid variable shadowingLeonardo Bras1-4/+15
Create DEF_FIELD_ADDR_VAR as a more generic version of the DEF_FIELD_ADD macro, allowing usage of a variable name other than the struct element name. Also, sets DEF_FIELD_ADDR as a specific usage of DEF_FILD_ADDR_VAR in which the var name is the same as the struct element name. Then, makes use of DEF_FIELD_ADDR_VAR to create a variable of another name, in order to avoid variable shadowing. Signed-off-by: Leonardo Bras <leobras.c@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-19modpost: remove leftover symbol prefix handling for module device tableMasahiro Yamada1-4/+3
Blackfin and metag were the only architectures that prefix symbols with an underscore. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. It is no longer necessary to handle <prefix> part of module device table symbols. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-04kbuild/Makefile: Prepare for using macros in inline assembly code to work ↵Nadav Amit1-0/+2
around asm() related GCC inlining bugs Using macros in inline assembly allows us to work around bugs in GCC's inlining decisions. Compile macros.S and use it to assemble all C files. Currently only x86 will use it. Background: The inlining pass of GCC doesn't include an assembler, so it's not aware of basic properties of the generated code, such as its size in bytes, or that there are such things as discontiuous blocks of code and data due to the newfangled linker feature called 'sections' ... Instead GCC uses a lazy and fragile heuristic: it does a linear count of certain syntactic and whitespace elements in inlined assembly block source code, such as a count of new-lines and semicolons (!), as a poor substitute for "code size and complexity". Unsurprisingly this heuristic falls over and breaks its neck whith certain common types of kernel code that use inline assembly, such as the frequent practice of putting useful information into alternative sections. As a result of this fresh, 20+ years old GCC bug, GCC's inlining decisions are effectively disabled for inlined functions that make use of such asm() blocks, because GCC thinks those sections of code are "large" - when in reality they are often result in just a very low number of machine instructions. This absolute lack of inlining provess when GCC comes across such asm() blocks both increases generated kernel code size and causes performance overhead, which is particularly noticeable on paravirt kernels, which make frequent use of these inlining facilities in attempt to stay out of the way when running on baremetal hardware. Instead of fixing the compiler we use a workaround: we set an assembly macro and call it from the inlined assembly block. As a result GCC considers the inline assembly block as a single instruction. (Which it often isn't but I digress.) This uglifies and bloats the source code - for example just the refcount related changes have this impact: Makefile | 9 +++++++-- arch/x86/Makefile | 7 +++++++ arch/x86/kernel/macros.S | 7 +++++++ scripts/Kbuild.include | 4 +++- scripts/mod/Makefile | 2 ++ 5 files changed, 26 insertions(+), 3 deletions(-) Yay readability and maintainability, it's not like assembly code is hard to read and maintain ... We also hope that GCC will eventually get fixed, but we are not holding our breath for that. Yet we are optimistic, it might still happen, any decade now. [ mingo: Wrote new changelog describing the background. ] Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/20181003213100.189959-3-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-08-22scripts: modpost: check memory allocation resultsRandy Dunlap1-4/+4
Fix missing error check for memory allocation functions in scripts/mod/modpost.c. Fixes kernel bugzilla #200319: https://bugzilla.kernel.org/show_bug.cgi?id=200319 Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Yuexing Wang <wangyxlandq@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-18Merge tag 'usb-4.19-rc1' of ↵Linus Torvalds2-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB and phy driver patch set for 4.19-rc1. Nothing huge but there was a lot of work that happened this development cycle: - lots of type-c work, with drivers graduating out of staging, and displayport support being added. - new PHY drivers - the normal collection of gadget driver updates and fixes - code churn to work on the urb handling path, using irqsave() everywhere in anticipation of making this codepath a lot simpler in the future. - usbserial driver fixes and reworks - other misc changes All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: serial: pl2303: add a new device id for ATEN usb: renesas_usbhs: Kconfig: convert to SPDX identifiers usb: dwc3: gadget: Check MaxPacketSize from descriptor usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms usb: dwc2: Turn on uframe_sched on "amlogic" platforms usb: dwc2: Turn on uframe_sched on "his" platforms usb: dwc2: Turn on uframe_sched on "bcm" platforms usb: dwc2: gadget: ISOC's starting flow improvement usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic. usb: dwc3: core: Enable AutoRetry feature in the controller usb: dwc3: Set default mode for dwc_usb31 usb: gadget: udc: renesas_usb3: Add register of usb role switch usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep usb: dwc2: Modify dwc2_readl/writel functions prototype usb: dwc3: pci: Intel Merrifield can be host usb: dwc3: pci: Supply device properties via driver data arm64: dts: dwc3: description of incr burst type usb: dwc3: Enable undefined length INCR burst type usb: dwc3: add global soc bus configuration reg0 usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci ...
2018-07-18kbuild: Add build salt to the kernel and modulesLaura Abbott1-0/+3
In Fedora, the debug information is packaged separately (foo-debuginfo) and can be installed separately. There's been a long standing issue where only one version of a debuginfo info package can be installed at a time. There's been an effort for Fedora for parallel debuginfo to rectify this problem. Part of the requirement to allow parallel debuginfo to work is that build ids are unique between builds. The existing upstream rpm implementation ensures this by re-calculating the build-id using the version and release as a seed. This doesn't work 100% for the kernel because of the vDSO which is its own binary and doesn't get updated when embedded. Fix this by adding some data in an ELF note for both the kernel and modules. The data is controlled via a Kconfig option so distributions can set it to an appropriate value to ensure uniqueness between builds. Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-02usb: typec: Bus type for alternate modesHeikki Krogerus2-0/+17
Introducing a simple bus for the alternate modes. Bus allows binding drivers to the discovered alternate modes the partners support. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06Merge tag 'kbuild-v4.18' of ↵Linus Torvalds1-56/+41
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - improve fixdep to coalesce consecutive slashes in dep-files - fix some issues of the maintainer string generation in deb-pkg script - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up several tools and linker scripts - clean-up modpost - allow to enable the dead code/data elimination for PowerPC in EXPERT mode - improve two coccinelle scripts for better performance - pass endianness and machine size flags to sparse for all architecture - misc fixes * tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add machine size to CHECKFLAGS kbuild: add endianness flag to CHEKCFLAGS kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice scripts: Fixed printf format mismatch scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation coccinelle: deref_null: improve performance coccinelle: mini_lock: improve performance powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION modpost: constify *modname function argument where possible modpost: remove redundant is_vmlinux() test modpost: use strstarts() helper more widely modpost: pass struct elf_info pointer to get_modinfo() checkpatch: remove VMLINUX_SYMBOL() check vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL() kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX export.h: remove code for prefixing symbols with underscore depmod.sh: remove symbol prefix support ...
2018-06-05Merge tag 'char-misc-4.18-rc1' of ↵Linus Torvalds2-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the "big" char and misc driver patches for 4.18-rc1. It's not a lot of stuff here, but there are some highlights: - coreboot driver updates - soundwire driver updates - android binder updates - fpga big sync, mostly documentation - lots of minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits) vmw_balloon: fixing double free when batching mode is off MAINTAINERS: Add driver-api/fpga path fpga: clarify that unregister functions also free documentation: fpga: move fpga-region.txt to driver-api documentation: fpga: add bridge document to driver-api documentation: fpga: move fpga-mgr.txt to driver-api Documentation: fpga: move fpga overview to driver-api fpga: region: kernel-doc fixes fpga: bridge: kernel-doc fixes fpga: mgr: kernel-doc fixes fpga: use SPDX fpga: region: change api, add fpga_region_create/free fpga: bridge: change api, don't use drvdata fpga: manager: change api, don't use drvdata fpga: region: don't use drvdata in common fpga code Drivers: hv: vmbus: Removed an unnecessary cast from void * ver_linux: Drop redundant calls to system() to test if file is readable ver_linux: Move stderr redirection from function parameter to function body misc: IBM Virtual Management Channel Driver (VMC) rpmsg: Correct support for MODULE_DEVICE_TABLE() ...
2018-05-17modpost: constify *modname function argument where possibleMasahiro Yamada1-2/+2
Neither find_module() nor read_symbols() does change *modname. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17modpost: remove redundant is_vmlinux() testMasahiro Yamada1-2/+1
The second test of is_vmlinux() is redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17modpost: use strstarts() helper more widelyMasahiro Yamada1-21/+18
Currently, strstarts() is only used in export_from_secname(). Use it more widely to improve the code readability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17modpost: pass struct elf_info pointer to get_modinfo()Masahiro Yamada1-13/+12
get_(next_)modinfo takes a pointer and length pair of the .modinfo section. Instead, pass struct elf_info pointer to reduce the number of function arguments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17modpost: remove symbol prefix supportMasahiro Yamada1-20/+10
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX, hence VMLINUX_SYMBOL_STR(foo) can be simplify replaced with "foo". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-14rpmsg: Correct support for MODULE_DEVICE_TABLE()Andrew F. Davis2-0/+14
Due to missing a missing entry in file2alias.c MODULE_DEVICE_TABLE() are not generating the proper module aliases. Add the needed entry here. Fixes: bcabbccabffe ("rpmsg: add virtio-based remote processor messaging bus") Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-03modpost: delete stale commentRasmus Villemoes1-8/+1
Commit 7840fea200cd ("kbuild: Fix computing srcversion for modules") fixed the comment above parse_source_files to refer to the new source_ line, but left this one behind that could still give the impression that drivers/net/dummy.c appears in the deps_ variable. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-09mn10300: Remove the architectureDavid Howells1-4/+3
Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> cc: Masahiro Yamada <yamada.masahiro@socionext.com> cc: linux-am33-list@redhat.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-07Merge tag 'modules-for-v4.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Minor code cleanups and MAINTAINERS update" * tag 'modules-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: modpost: Remove trailing semicolon ftrace/module: Move ftrace_release_mod() to ddebug_cleanup label MAINTAINERS: Remove from module & paravirt maintenance
2018-02-01Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds2-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
2018-01-29Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Another set of melted spectrum related changes: - Code simplifications and cleanups for RSB and retpolines. - Make the indirect calls in KVM speculation safe. - Whitelist CPUs which are known not to speculate from Meltdown and prepare for the new CPUID flag which tells the kernel that a CPU is not affected. - A less rigorous variant of the module retpoline check which merily warns when a non-retpoline protected module is loaded and reflects that fact in the sysfs file. - Prepare for Indirect Branch Prediction Barrier support. - Prepare for exposure of the Speculation Control MSRs to guests, so guest OSes which depend on those "features" can use them. Includes a blacklist of the broken microcodes. The actual exposure of the MSRs through KVM is still being worked on" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Simplify indirect_branch_prediction_barrier() x86/retpoline: Simplify vmexit_fill_RSB() x86/cpufeatures: Clean up Spectre v2 related CPUID flags x86/cpu/bugs: Make retpoline module warning conditional x86/bugs: Drop one "mitigation" from dmesg x86/nospec: Fix header guards names x86/alternative: Print unadorned pointers x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support x86/cpufeature: Blacklist SPEC_CTRL/PRED_CMD on early Spectre v2 microcodes x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown x86/msr: Add definitions for new speculation control MSRs x86/cpufeatures: Add AMD feature bits for Speculation Control x86/cpufeatures: Add Intel feature bits for Speculation Control x86/cpufeatures: Add CPUID_7_EDX CPUID leaf module/retpoline: Warn about missing retpoline in module KVM: VMX: Make indirect call speculation safe KVM: x86: Make indirect calls in emulator speculation safe
2018-01-26module/retpoline: Warn about missing retpoline in moduleAndi Kleen1-0/+9
There's a risk that a kernel which has full retpoline mitigations becomes vulnerable when a module gets loaded that hasn't been compiled with the right compiler or the right option. To enable detection of that mismatch at module load time, add a module info string "retpoline" at build time when the module was compiled with retpoline support. This only covers compiled C source, but assembler source or prebuilt object files are not checked. If a retpoline enabled kernel detects a non retpoline protected module at load time, print a warning and report it in the sysfs vulnerability file. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: gregkh@linuxfoundation.org Cc: torvalds@linux-foundation.org Cc: jeyu@kernel.org Cc: arjan@linux.intel.com Link: https://lkml.kernel.org/r/20180125235028.31211-1-andi@firstfloor.org
2018-01-16modpost: Remove trailing semicolonLuis de Bethencourt1-1/+1
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-12-19soundwire: Add SoundWire bus typeVinod Koul2-0/+19
This adds the base SoundWire bus type, bus and driver registration. along with changes to module device table for new SoundWire device type. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-0/+32
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-12modpost: detect modules without a MODULE_LICENSERandy Dunlap1-1/+1
Partially revert commit 2fa365682943 ("kbuild: soften MODULE_LICENSE check") so that modpost detects modules that do not have a MODULE_LICENSE. Sam's commit also changed the fatal error to a warning, which I am leaving as is. This gives advance notice of when a module has no license and will taint the kernel if the module is loaded. This produces the following warnings on x86_64 allmodconfig: MODPOST 6520 modules WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/accel/kxsd9-i2c.o WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/adc/qcom-vadc-common.o WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/mtk-vcodec/mtk-vcodec-common.o WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o WARNING: modpost: missing MODULE_LICENSE() in drivers/net/phy/cortina.o WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pxa/pinctrl-pxa2xx.o WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o WARNING: modpost: missing MODULE_LICENSE() in drivers/rpmsg/qcom_glink_native.o WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/comedi/drivers/ni_atmio.o WARNING: modpost: missing MODULE_LICENSE() in net/9p/9pnet_xen.o WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-0/+4
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-6/+1
Several conflicts here. NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to nfp_fl_output() needed some adjustments because the code block is in an else block now. Parallel additions to net/pkt_cls.h and net/sch_generic.h A bug fix in __tcp_retransmit_skb() conflicted with some of the rbtree changes in net-next. The tc action RCU callback fixes in 'net' had some overlap with some of the recent tcf_block reworking. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22Merge branch 'for-linus' of ↵Linus Torvalds2-6/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A fix for a broken commit in the previous pull breaking automatic module loading of input handlers, such ad evdev" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: do not use property bits when generating module alias
2017-10-22Input: do not use property bits when generating module aliasDmitry Torokhov2-6/+1
The commit 8724ecb07229 ("Input: allow matching device IDs on property bits") started using property bits when generating module aliases for input handlers, but did not adjust the generation of MODALIAS attribute on input device uevents, breaking automatic module loading. Given that no handler currently uses property bits in their module tables, let's revert this part of the commit for now. Reported-by: Damien Wyart <damien.wyart@gmail.com> Tested-by: Damien Wyart <damien.wyart@gmail.com> Fixes: 8724ecb07229 ("Input: allow matching device IDs on property bits") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-1/+6
There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21Merge branch 'for-linus' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - joydev now implements a blacklist to avoid creating joystick nodes for accelerometers found in composite devices such as PlaStation controllers - assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-psu - check if CDC union descriptor is sane Input: joydev - blacklist ds3/ds4/udraw motion sensors Input: allow matching device IDs on property bits Input: factor out and export input_device_id matching code Input: goodix - poll the 'buffer status' bit before reading data Input: axp20x-pek - fix module not auto-loading for axp221 pek Input: tca8418 - enable interrupt after it has been requested Input: stmfts - fix setting ABS_MT_POSITION_* maximum size Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen Input: synaptics - disable kernel tracking on SMBus devices
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 12:12:52 +0000