summaryrefslogtreecommitdiffstats
path: root/scripts/mod
AgeCommit message (Collapse)AuthorFilesLines
2022-01-19Merge tag 'riscv-for-linus-5.17-mw0' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the DA9063 as used on the HiFive Unmatched. - Support for relative extables, which puts us in line with other architectures and save some space in vmlinux. - A handful of kexec fixes/improvements, including the ability to run crash kernels from PCI-addressable memory on the HiFive Unmatched. - Support for the SBI SRST extension, which allows systems that do not have an explicit driver in Linux to reboot. - A handful of fixes and cleanups, including to the defconfigs and device trees. * tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits) RISC-V: Use SBI SRST extension when available riscv: mm: fix wrong phys_ram_base value for RV64 RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign riscv: errata: alternative: mark vendor_patch_func __initdata riscv: head: make secondary_start_common() static riscv: remove cpu_stop() riscv: try to allocate crashkern region from 32bit addressible memory riscv: use hart id instead of cpu id on machine_kexec riscv: Don't use va_pa_offset on kdump riscv: dts: sifive: fu540-c000: Fix PLIC node riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values riscv: dts: sifive: Group tuples in register properties riscv: dts: sifive: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Fix clock controller node riscv: dts: microchip: mpfs: Fix reference clock node riscv: dts: microchip: mpfs: Fix PLIC node riscv: dts: microchip: mpfs: Drop empty chosen node riscv: dts: canaan: Group tuples in interrupt properties ...
2022-01-05riscv: switch to relative exception tablesJisheng Zhang1-0/+15
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup. However, RISCV label difference will actually produce two relocations, a pair of R_RISCV_ADD32 and R_RISCV_SUB32. Take below simple code for example: $ cat test.S .section .text 1: nop .section __ex_table,"a" .balign 4 .long (1b - .) .previous $ riscv64-linux-gnu-gcc -c test.S $ riscv64-linux-gnu-readelf -r test.o Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0 000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0 The modpost will complain the R_RISCV_SUB32 relocation, so we need to patch modpost.c to skip this relocation for .rela__ex_table section. After this patch, the __ex_table section size of defconfig vmlinux is reduced from 7072 Bytes to 3536 Bytes. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-09HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()Thomas Weißschuh2-0/+27
This allows to selectively autoload drivers for ISH devices. Currently all ISH drivers are loaded for all systems having any ISH device. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds3-16/+11
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-09-03Merge tag 'powerpc-5.15-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Convert pseries & powernv to use MSI IRQ domains. - Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are given a CPU number on the same node as previously, when possible. - Add support for a new more flexible device-tree format for specifying NUMA distances. - Convert powerpc to GENERIC_PTDUMP. - Retire sbc8548 and sbc8641d board support. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, and Zheng Yongjun. * tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits) powerpc/bug: Cast to unsigned long before passing to inline asm powerpc/ptdump: Fix generic ptdump for 64-bit KVM: PPC: Fix clearing never mapped TCEs in realmode powerpc/pseries/iommu: Rename "direct window" to "dma window" powerpc/pseries/iommu: Make use of DDW for indirect mapping powerpc/pseries/iommu: Find existing DDW with given property name powerpc/pseries/iommu: Update remove_dma_window() to accept property name powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() powerpc/pseries/iommu: Allow DDW windows starting at 0x00 powerpc/pseries/iommu: Add ddw_list_new_entry() helper powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper powerpc/kernel/iommu: Add new iommu_table_in_use() helper powerpc/pseries/iommu: Replace hard-coded page shift powerpc/numa: Update cpu_cpu_map on CPU online/offline powerpc/numa: Print debug statements only when required powerpc/numa: convert printk to pr_xxx powerpc/numa: Drop dbg in favour of pr_debug powerpc/smp: Enable CACHE domain for shared processor powerpc/smp: Update cpu_core_map on all PowerPc systems ...
2021-09-03modpost: get the *.mod file path more simplyMasahiro Yamada3-16/+11
get_src_version() strips 'o' or 'lto.o' from the end of the object file path (so, postfixlen is 1 or 5), then adds 'mod'. If you look at the code closely, mod->name already holds the base path with the extension stripped. Most of the code changes made by commit 7ac204b545f2 ("modpost: lto: strip .lto from module names") was actually unneeded. sumversion.c does not need strends(), so it can get back local in modpost.c again. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-26PCI / VFIO: Add 'override_only' support for VFIO PCI sub systemMax Gurtovoy2-2/+16
Expose an 'override_only' helper macro (i.e. PCI_DRIVER_OVERRIDE_DEVICE_VFIO) for VFIO PCI sub system and add the required code to prefix its matching entries with "vfio_" in modules.alias file. It allows VFIO device drivers to include match entries in the modules.alias file produced by kbuild that are not used for normal driver autoprobing and module autoloading. Drivers using these match entries can be connected to the PCI device manually, by userspace, using the existing driver_override sysfs. For example the resulting modules.alias may have: alias pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_core alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci In this example mlx5_core and mlx5_vfio_pci match to the same PCI device. The kernel will autoload and autobind to mlx5_core but the kernel and udev mechanisms will ignore mlx5_vfio_pci. When userspace wants to change a device to the VFIO subsystem it can implement a generic algorithm: 1) Identify the sysfs path to the device: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 2) Get the modalias string from the kernel: $ cat /sys/bus/pci/devices/0000:01:00.0/modalias pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00 3) Prefix it with vfio_: vfio_pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00 4) Search modules.alias for the above string and select the entry that has the fewest *'s: alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci 5) modprobe the matched module name: $ modprobe mlx5_vfio_pci 6) cat the matched module name to driver_override: echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:01:00.0/driver_override 7) unbind device from original module echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind 8) probe PCI drivers (or explicitly bind to mlx5_vfio_pci) echo 0000:01:00.0 > /sys/bus/pci/drivers_probe The algorithm is independent of bus type. In future the other buses with VFIO device drivers, like platform and ACPI, can use this algorithm as well. This patch is the infrastructure to provide the information in the modules.alias to userspace. Convert the only VFIO pci_driver which results in one new line in the modules.alias: alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci Later series introduce additional HW specific VFIO PCI drivers, such as mlx5_vfio_pci. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for pci.h Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20210826103912.128972-11-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-08-15powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm gotoChristophe Leroy1-1/+1
Using asm goto in __WARN_FLAGS() and WARN_ON() allows more flexibility to GCC. For that add an entry to the exception table so that program_check_exception() knowns where to resume execution after a WARNING. Here are two exemples. The first one is done on PPC32 (which benefits from the previous patch), the second is on PPC64. unsigned long test(struct pt_regs *regs) { int ret; WARN_ON(regs->msr & MSR_PR); return regs->gpr[3]; } unsigned long test9w(unsigned long a, unsigned long b) { if (WARN_ON(!b)) return 0; return a / b; } Before the patch: 000003a8 <test>: 3a8: 81 23 00 84 lwz r9,132(r3) 3ac: 71 29 40 00 andi. r9,r9,16384 3b0: 40 82 00 0c bne 3bc <test+0x14> 3b4: 80 63 00 0c lwz r3,12(r3) 3b8: 4e 80 00 20 blr 3bc: 0f e0 00 00 twui r0,0 3c0: 80 63 00 0c lwz r3,12(r3) 3c4: 4e 80 00 20 blr 0000000000000bf0 <.test9w>: bf0: 7c 89 00 74 cntlzd r9,r4 bf4: 79 29 d1 82 rldicl r9,r9,58,6 bf8: 0b 09 00 00 tdnei r9,0 bfc: 2c 24 00 00 cmpdi r4,0 c00: 41 82 00 0c beq c0c <.test9w+0x1c> c04: 7c 63 23 92 divdu r3,r3,r4 c08: 4e 80 00 20 blr c0c: 38 60 00 00 li r3,0 c10: 4e 80 00 20 blr After the patch: 000003a8 <test>: 3a8: 81 23 00 84 lwz r9,132(r3) 3ac: 71 29 40 00 andi. r9,r9,16384 3b0: 40 82 00 0c bne 3bc <test+0x14> 3b4: 80 63 00 0c lwz r3,12(r3) 3b8: 4e 80 00 20 blr 3bc: 0f e0 00 00 twui r0,0 0000000000000c50 <.test9w>: c50: 7c 89 00 74 cntlzd r9,r4 c54: 79 29 d1 82 rldicl r9,r9,58,6 c58: 0b 09 00 00 tdnei r9,0 c5c: 7c 63 23 92 divdu r3,r3,r4 c60: 4e 80 00 20 blr c70: 38 60 00 00 li r3,0 c74: 4e 80 00 20 blr In the first exemple, we see GCC doesn't need to duplicate what happens after the trap. In the second exemple, we see that GCC doesn't need to emit a test and a branch in the likely path in addition to the trap. We've got some WARN_ON() in .softirqentry.text section so it needs to be added in the OTHER_TEXT_SECTIONS in modpost.c Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/389962b1b702e3c78d169e59bcfac56282889173.1618331882.git.christophe.leroy@csgroup.eu
2021-06-17kbuild: modpost: Explicitly warn about unprototyped symbolsMark Brown1-2/+5
One common cause of modpost version generation failures is a failure to prototype exported assembly functions - the tooling requires this for exported functions even if they are not and should not be called from C code in order to do the version mangling for symbols. Unfortunately the error message is currently rather abstruse, simply saying that "version generation failed" and even diving into the code doesn't directly show what's going on since there's several steps between the problem and it being observed. Provide an explicit hint as to the likely cause of a version generation failure to help anyone who runs into this in future more readily diagnose and fix the problem. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-02.gitignore: prefix local generated files with a slashMasahiro Yamada1-4/+4
The pattern prefixed with '/' matches files in the same directory, but not ones in sub-directories. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Andra Paraschiv <andraprs@amazon.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
2021-04-25kbuild: add an elfnote for whether vmlinux is built with ltoYonghong Song1-0/+2
Currently, clang LTO built vmlinux won't work with pahole. LTO introduced cross-cu dwarf tag references and broke current pahole model which handles one cu as a time. The solution is to merge all cu's as one pahole cu as in [1]. We would like to do this merging only if cross-cu dwarf references happens. The LTO build mode is a pretty good indication for that. In earlier version of this patch ([2]), clang flag -grecord-gcc-switches is proposed to add to compilation flags so pahole could detect "-flto" and then merging cu's. This will increate the binary size of 1% without LTO though. Arnaldo suggested to use a note to indicate the vmlinux is built with LTO. Such a cheap way to get whether the vmlinux is built with LTO or not helps pahole but is also useful for tracing as LTO may inline/delete/demote global functions, promote static functions, etc. So this patch added an elfnote with a new type LINUX_ELFNOTE_LTO_INFO. The owner of the note is "Linux". With gcc 8.4.1 and clang trunk, without LTO, I got $ readelf -n vmlinux Displaying notes found in: .notes Owner Data size Description ... Linux 0x00000004 func description data: 00 00 00 00 ... With "readelf -x ".notes" vmlinux", I can verify the above "func" with type code 0x101. With clang thin-LTO, I got the same as above except the following: description data: 01 00 00 00 which indicates the vmlinux is built with LTO. [1] https://lore.kernel.org/bpf/20210325065316.3121287-1-yhs@fb.com/ [2] https://lore.kernel.org/bpf/20210331001623.2778934-1-yhs@fb.com/ Suggested-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by: Yonghong Song <yhs@fb.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc4 (x86-64) Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25scripts: modpost.c: Fix a few typosBhaskar Chowdhury1-4/+4
s/agorithm/algorithm/ s/criterias/criteria/ s/targetting/targeting/ ....two different places. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25kbuild: fix false-positive modpost warning when all symbols are trimmedMasahiro Yamada1-13/+12
Nathan reports that the mips defconfig emits the following warning: WARNING: modpost: Symbol info of vmlinux is missing. Unresolved symbol check will be entirely skipped. This false-positive happens when CONFIG_TRIM_UNUSED_KSYMS is enabled, but no CONFIG option is set to 'm'. Commit a0590473c5e6 ("nfs: fix PNFS_FLEXFILE_LAYOUT Kconfig default") turned the last 'm' into 'y' for the mips defconfig, and uncovered this issue. In this case, the module feature itself is enabled, but we have no module to build. As a result, CONFIG_TRIM_UNUSED_KSYMS drops all the instances of EXPORT_SYMBOL. Then, modpost wrongly assumes vmlinux is missing because vmlinux.symvers is empty. (As another false-positive case, you can create a module that does not use any symbol of vmlinux). The current behavior is to entirely suppress the unresolved symbol warnings when vmlinux is missing just because there are too many. I found the origin of this code in the historical git tree. [1] If this is a matter of noisiness, I think modpost can display the first 10 warnings, and the number of suppressed warnings at the end. You will get a bit noisier logs when you run 'make modules' without vmlinux, but such warnings are better to show because you never know the resulting modules are actually loadable or not. This commit changes the following: - If any of input *.symver files is missing, pass -w option to let the module build keep going with warnings instead of errors. - If there are too many (10+) unresolved symbol warnings, show only the first 10, and also the number of suppressed warnings. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=1cc0e0529569bf6a94f6d49770aa6d4b599d2c46 Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25kbuild: generate Module.symvers only when vmlinux existsMasahiro Yamada1-14/+1
The external module build shows the following warning if Module.symvers is missing in the kernel tree. WARNING: Symbol version dump "Module.symvers" is missing. Modules may not have dependencies or modversions. I think this is an important heads-up because the resulting modules may not work as expected. This happens when you did not build the entire kernel tree, for example, you might have prepared the minimal setups for external modules by 'make defconfig && make modules_preapre'. A problem is that 'make modules' creates Module.symvers even without vmlinux. In this case, that warning is suppressed since Module.symvers already exists in spite of its incomplete content. The incomplete (i.e. invalid) Module.symvers should not be created. This commit changes the second pass of modpost to dump symbols into modules-only.symvers. The final Module.symvers is created by concatenating vmlinux.symvers and modules-only.symvers if both exist. Module.symvers is supposed to collect symbols from both vmlinux and modules. It might be a bit confusing, and I am not quite sure if it is an official interface, but presumably it is difficult to rename it because some tools (e.g. kmod) parse it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-24Merge tag 'char-misc-5.12-rc1' of ↵Linus Torvalds2-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ...
2021-02-23Merge tag 'modules-for-v5.12' of ↵Linus Torvalds2-50/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export types were introduced between 2006 - 2008. All the of the unused symbols have been long removed and gpl future symbols were converted to gpl quite a long time ago, and I don't believe these export types have been used ever since. So, I think it should be safe to retire those export types now (Christoph Hellwig) - Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig) - Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as it is the only caller (Christoph Hellwig) - Unexport find_module() and module_mutex and fix the last module callers to not rely on these anymore. Make module_mutex internal to the module loader (Christoph Hellwig) - Harden ELF checks on module load and validate ELF structures before checking the module signature (Frank van der Linden) - Fix undefined symbol warning for clang (Fangrui Song) - Fix smatch warning (Dan Carpenter) * tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: potential uninitialized return in module_kallsyms_on_each_symbol() module: remove EXPORT_UNUSED_SYMBOL* module: remove EXPORT_SYMBOL_GPL_FUTURE module: move struct symsearch to module.c module: pass struct find_symbol_args to find_symbol module: merge each_symbol_section into find_symbol module: remove each_symbol_in_section module: mark module_mutex static kallsyms: only build {,module_}kallsyms_on_each_symbol when required kallsyms: refactor {,module_}kallsyms_on_each_symbol module: use RCU to synchronize find_module module: unexport find_module and module_mutex drm: remove drm_fb_helper_modinit powerpc/powernv: remove get_cxl_module module: harden ELF info handling module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
2021-02-23Merge tag 'clang-lto-v5.12-rc1' of ↵Linus Torvalds4-10/+22
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull clang LTO updates from Kees Cook: "Clang Link Time Optimization. This is built on the work done preparing for LTO by arm64 folks, tracing folks, etc. This includes the core changes as well as the remaining pieces for arm64 (LTO has been the default build method on Android for about 3 years now, as it is the prerequisite for the Control Flow Integrity protections). While x86 LTO enablement is done, it depends on some pending objtool clean-ups. It's possible that I'll send a "part 2" pull request for LTO that includes x86 support. For merge log posterity, and as detailed in commit dc5723b02e52 ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO build: make LLVM=1 LLVM_IAS=1 defconfig scripts/config -e LTO_CLANG_THIN make LLVM=1 LLVM_IAS=1 (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-" and "ARCH=arm64" to the "make" command lines.) Summary: - Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen) - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)" * tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds arm64: allow LTO to be selected arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS arm64: vdso: disable LTO drivers/misc/lkdtm: disable LTO for rodata.o efi/libstub: disable LTO scripts/mod: disable LTO for empty.c modpost: lto: strip .lto from module names PCI: Fix PREL32 relocations for LTO init: lto: fix PREL32 relocations init: lto: ensure initcall ordering kbuild: lto: add a default list of used symbols kbuild: lto: merge module sections kbuild: lto: limit inlining kbuild: lto: fix module versioning kbuild: add support for Clang LTO tracing: move function tracer options to Kconfig
2021-02-08module: remove EXPORT_UNUSED_SYMBOL*Christoph Hellwig2-38/+3
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the unused functionality as we generally just remove unused code anyway. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-02-08module: remove EXPORT_SYMBOL_GPL_FUTUREChristoph Hellwig2-13/+1
As far as I can tell this has never been used at all, and certainly not any time recently. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14scripts/mod: disable LTO for empty.cSami Tolvanen1-0/+1
With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object files. As empty.o is used for probing target properties, disable LTO for it to produce an object file instead. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-12-samitolvanen@google.com
2021-01-14modpost: lto: strip .lto from module namesSami Tolvanen3-10/+21
With LTO, everything is compiled into LLVM bitcode, so we have to link each module into native code before modpost. Kbuild uses the .lto.o suffix for these files, which also ends up in module information. This change strips the unnecessary .lto suffix from the module name. Suggested-by: Bill Wendling <morbo@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-11-samitolvanen@google.com
2021-01-07fpga: dfl: add dfl bus support to MODULE_DEVICE_TABLE()Xu Yilun2-0/+17
Device Feature List (DFL) is a linked list of feature headers within the device MMIO space. It is used by FPGA to enumerate multiple sub features within it. Each feature can be uniquely identified by DFL type and feature id, which can be read out from feature headers. A dfl bus helps DFL framework modularize DFL device drivers for different sub features. The dfl bus matches its devices and drivers by DFL type and feature id. This patch adds dfl bus support to MODULE_DEVICE_TABLE() by adding info about struct dfl_device_id in devicetable-offsets.c and add a dfl entry point in file2alias.c. Acked-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20210107043714.991646-6-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07platform/surface: aggregator: Add dedicated bus and device typeMaximilian Luz2-0/+31
The Surface Aggregator EC provides varying functionality, depending on the Surface device. To manage this functionality, we use dedicated client devices for each subsystem or virtual device of the EC. While some of these clients are described as standard devices in ACPI and the corresponding client drivers can be implemented as platform drivers in the kernel (making use of the controller API already present), many devices, especially on newer Surface models, cannot be found there. To simplify management of these devices, we introduce a new bus and client device type for the Surface Aggregator subsystem. The new device type takes care of managing the controller reference, essentially guaranteeing its validity for as long as the client device exists, thus alleviating the need to manually establish device links for that purpose in the client driver (as has to be done with the platform devices). Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-12-22Merge tag 'kbuild-v5.11' of ↵Linus Torvalds2-45/+43
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use /usr/bin/env for shebang lines in scripts - Remove useless -Wnested-externs warning flag - Update documents - Refactor log handling in modpost - Stop building modules without MODULE_LICENSE() tag - Make the insane combination of 'static' and EXPORT_SYMBOL an error - Improve genksyms to handle _Static_assert() * tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/kbuild: Document platform dependency practises Documentation/kbuild: Document COMPILE_TEST dependencies genksyms: Ignore module scoped _Static_assert() modpost: turn static exports into error modpost: turn section mismatches to error from fatal() modpost: change license incompatibility to error() from fatal() modpost: turn missing MODULE_LICENSE() into error modpost: refactor error handling and clarify error/fatal difference modpost: rename merror() to error() kbuild: don't hardcode depmod path kbuild: doc: document subdir-y syntax kbuild: doc: clarify the difference between extra-y and always-y kbuild: doc: split if_changed explanation to a separate section kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections kbuild: doc: fix 'List directories to visit when descending' section kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/ kbuild: doc: update the description about kbuild Makefiles Makefile.extrawarn: remove -Wnested-externs warning tweewide: Fix most Shebang lines
2020-12-21modpost: turn static exports into errorQuentin Perret1-3/+3
Using EXPORT_SYMBOL*() on static functions is fundamentally wrong. Modpost currently reports that as a warning, but clearly this is not a pattern we should allow, and all in-tree occurences should have been fixed by now. So, promote the warn() message to error() to make sure this never happens again. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Matthias Maennich <maennich@google.com> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: turn section mismatches to error from fatal()Masahiro Yamada1-4/+4
There is code that reports static EXPORT_SYMBOL a few lines below. It is not a good idea to bail out here. I renamed sec_mismatch_fatal to sec_mismatch_warn_only (with logical inversion) to match to CONFIG_SECTION_MISMATCH_WARN_ONLY. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: change license incompatibility to error() from fatal()Masahiro Yamada1-2/+2
Change fatal() to error() to continue running to report more possible issues. There is no difference in the fact that modpost will fail anyway. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: turn missing MODULE_LICENSE() into errorMasahiro Yamada1-1/+1
Do not create modules with no license tag. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-21modpost: refactor error handling and clarify error/fatal differenceMasahiro Yamada2-29/+27
We have 3 log functions. fatal() is special because it lets modpost bail out immediately. The difference between warn() and error() is the only prefix parts ("WARNING:" vs "ERROR:"). In my understanding, the expected handling of error() is to propagate the return code of the function to the exit code of modpost, as check_exports() etc. already does. This is a good manner in general because we should display as many error messages as possible in a single run of modpost. What is annoying about fatal() is that it kills modpost at the first error. People would need to run Kbuild again and again until they fix all errors. But, unfortunately, people tend to do: "This case should not be allowed. Let's replace warn() with fatal()." One of the reasons is probably it is tedious to manually hoist the error code to the main() function. This commit refactors error() so any single call for it automatically makes modpost return the error code. I also added comments in modpost.h for warn(), error(), and fatal(). Please use fatal() only when you have a strong reason to do so. For example: - Memory shortage (i.e. malloc() etc. has failed) - The ELF file is broken, and there is no point to continue parsing - Something really odd has happened For general coding errors, please use error(). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Quentin Perret <qperret@google.com>
2020-12-21modpost: rename merror() to error()Masahiro Yamada2-6/+6
The log function names, warn(), merror(), fatal() are inconsistent. Commit 2a11665945d5 ("kbuild: distinguish between errors and warnings in modpost") intentionally chose merror() to avoid the conflict with the library function error(). See man page of error(3). But, we are already causing the conflict with warn() because it is also a library function. See man page of warn(3). err() would be a problem for the same reason. The common technique to work around name conflicts is to use macros. For example: /* in a header */ #define error(fmt, ...) __error(fmt, ##__VA_ARGS__) #define warn(fmt, ...) __warn(fmt, ##__VA_ARGS__) /* function definition */ void __error(const char *fmt, ...) { <our implementation> } void __warn(const char *fmt, ...) { <our implementation> } In this way, we can implement our own warn() and error(), still we can include <error.h> and <err.h> with no problem. And, commit 93c95e526a4e ("modpost: rework and consolidate logging interface") already did that. Since the log functions are all macros, we can use error() without causing "conflicting types" errors. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-04Add auxiliary bus supportDave Ertman2-0/+11
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver. It enables drivers to create an auxiliary_device and bind an auxiliary_driver to it. The bus supports probe/remove shutdown and suspend/resume callbacks. Each auxiliary_device has a unique string based id; driver binds to an auxiliary_device based on this id through the bus. Co-developed-by: Kiran Patil <kiran.patil@intel.com> Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Co-developed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Martin Habets <mhabets@solarflare.com> Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches1-2/+2
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-09Merge tag 'kbuild-v5.9' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler
2020-08-10kbuild: introduce hostprogs-always-y and userprogs-always-yMasahiro Yamada1-2/+2
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2020-08-05Merge tag 'char-misc-5.9-rc1' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...
2020-07-27Merge 5.8-rc7 into char-misc-nextGreg Kroah-Hartman1-2/+10
This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-27modpost: explain why we can't use strsepWolfram Sang1-0/+1
Mention why we open-code strsep, so it is clear that it is intentional. Fixes: 736bb11898ef ("modpost: remove use of non-standard strsep() in HOSTCC code") Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-07modpost: remove use of non-standard strsep() in HOSTCC codeH. Nikolaus Schaller1-2/+10
strsep() is neither standard C nor POSIX and used outside the kernel code here. Using it here requires that the build host supports it out of the box which is e.g. not true for a Darwin build host and using a cross-compiler. This leads to: scripts/mod/modpost.c:145:2: warning: implicit declaration of function 'strsep' [-Wimplicit-function-declaration] return strsep(stringp, "\n"); ^ and a segfault when running MODPOST. See also: https://stackoverflow.com/a/7219504 So let's replace this by strchr() instead of using strsep(). It does not hurt kernel size or speed since this code is run on the build host. Fixes: ac5100f5432967 ("modpost: add read_text_file() and get_line() helpers") Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-30soundwire: extend SDW_SLAVE_ENTRYPierre-Louis Bossart2-1/+7
The SoundWire 1.2 specification adds new capabilities that were not present in previous version, such as the class ID. To enable support for class drivers, and well as drivers that address a specific version, all fields of the sdw_device_id structure need to be exposed. For SoundWire 1.0 and 1.1 devices, a wildcard is used so class and version information are ignored. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200608205436.2402-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-06Merge tag 'kbuild-v5.8' of ↵Linus Torvalds3-310/+212
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
2020-06-06Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware/dmi: Report DMI Bios & EC firmware release
2020-06-06modpost: change elf_info->size to size_tMasahiro Yamada2-6/+5
Align with the mmap / munmap APIs. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove is_vmlinux() helperMasahiro Yamada1-15/+1
Now that is_vmlinux() is called only in new_module(), we can inline the function call. modname is the basename with '.o' is stripped. No need to compare it with 'vmlinux.o'. vmlinux is always located at the current working directory. No need to strip the directory path. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: strip .o from modname before calling new_module()Masahiro Yamada2-10/+12
new_module() conditionally strips the .o because the modname has .o suffix when it is called from read_symbols(), but no .o when it is called from read_dump(). It is clearer to strip .o in read_symbols(). I also used flexible-array for mod->name. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: set have_vmlinux in new_module()Masahiro Yamada1-5/+3
Set have_vmlinux flag in a single place. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->skip struct memberMasahiro Yamada2-7/+3
The meaning of 'skip' is obscure since it does not explain "what to skip". mod->skip is set when it is vmlinux or the module info came from a dump file. So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump). For the check in write_namespace_deps_files(), mod->is_vmlinux is unneeded because the -d option is not passed in the first pass of modpost. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: add mod->is_vmlinux struct memberMasahiro Yamada2-9/+11
is_vmlinux() is called in several places to check whether the current module is vmlinux or not. It is faster and clearer to check mod->is_vmlinux flag. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()Masahiro Yamada1-12/+8
check_exports() is never called for vmlinux because mod->skip is set for vmlinux. Hence, check_for_gpl_usage() and check_for_unused() are not called for vmlinux, either. is_vmlinux() is always false here. Remove the is_vmlinux() calls, and hard-code the ".ko" suffix. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->is_dot_o struct memberMasahiro Yamada2-13/+2
Previously, there were two cases where mod->is_dot_o is unset: [1] the executable 'vmlinux' in the second pass of modpost [2] modules loaded by read_dump() I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'. Now that modpost does not parse the executable 'vmlinux', this case does not happen. [2] is obscure, maybe a bug. Module.symver stores module paths without extension. So, none of modules loaded by read_dump() has the .o suffix, and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because handle_symbol() is not called for the case. To sum up, all the parsed ELF files are .o files. mod->is_dot_o is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove -s optionMasahiro Yamada1-8/+2
The -s option was added by commit 8d8d8289df65 ("kbuild: do not do section mismatch checks on vmlinux in 2nd pass"). Now that the second pass does not parse vmlinux, this option is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>