summaryrefslogtreecommitdiffstats
path: root/scripts/mod
AgeCommit message (Collapse)AuthorFilesLines
2016-06-26staging: fsl-mc: add support for device table matchingStuart Yoder2-0/+16
Move the definition of fsl_mc_device_id to its proper location in mod_devicetable.h, and add fsl-mc bus support to devicetable-offsets.c and file2alias.c to enable device table matching. With this patch udev based module loading of fsl-mc drivers is supported. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08of: fix autoloading due to broken modalias with no 'compatible'Wolfram Sang1-1/+1
Because of an improper dereference, a stray 'C' character was output to the modalias when no 'compatible' was specified. This is the case for some old PowerMac drivers which only set the 'name' property. Fix it to let them match again. Reported-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Mathieu Malaterre <malat@debian.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Andreas Schwab <schwab@linux-m68k.org> Fixes: 6543becf26fff6 ("mod/file2alias: make modalias generation safe for cross compiling") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-05modpost: fix module autoloading for OF devices with generic compatible propertyPhilipp Zabel1-24/+45
Since the wildcard at the end of OF module aliases is gone, autoloading of modules that don't match a device's last (most generic) compatible value fails. For example the CODA960 VPU on i.MX6Q has the SoC specific compatible "fsl,imx6q-vpu" and the generic compatible "cnm,coda960". Since the driver currently only works with knowledge about the SoC specific integration, it doesn't list "cnm,cod960" in the module device table. This results in the device compatible "of:NvpuT<NULL>Cfsl,imx6q-vpuCcnm,coda960" not matching the module alias "of:N*T*Cfsl,imx6q-vpu" anymore, whereas before commit 2f632369ab79 ("modpost: don't add a trailing wildcard for OF module aliases") it matched the module alias "of:N*T*Cfsl,imx6q-vpu*". This patch adds two module aliases for each compatible, one without the wildcard and one with "C*" appended. $ modinfo coda | grep imx6q alias: of:N*T*Cfsl,imx6q-vpuC* alias: of:N*T*Cfsl,imx6q-vpu Fixes: 2f632369ab79 ("modpost: don't add a trailing wildcard for OF module aliases") Link: http://lkml.kernel.org/r/1462203339-15340-1-git-send-email-p.zabel@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-29objtool: Mark non-standard object files and directoriesJosh Poimboeuf1-0/+2
Code which runs outside the kernel's normal mode of operation often does unusual things which can cause a static analysis tool like objtool to emit false positive warnings: - boot image - vdso image - relocation - realmode - efi - head - purgatory - modpost Set OBJECT_FILES_NON_STANDARD for their related files and directories, which will tell objtool to skip checking them. It's ok to skip them because they don't affect runtime stack traces. Also skip the following code which does the right thing with respect to frame pointers, but is too "special" to be validated by a tool: - entry - mcount Also skip the test_nx module because it modifies its exception handling table at runtime, which objtool can't understand. Fortunately it's just a test module so it doesn't matter much. Currently objtool is the only user of OBJECT_FILES_NON_STANDARD, but it might eventually be useful for other tools. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/366c080e3844e8a5b6a0327dc7e8c2b90ca3baeb.1456719558.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-21powerpc: Simplify module TOC handlingAlan Modra1-1/+2
PowerPC64 uses the symbol .TOC. much as other targets use _GLOBAL_OFFSET_TABLE_. It identifies the value of the GOT pointer (or in powerpc parlance, the TOC pointer). Global offset tables are generally local to an executable or shared library, or in the kernel, module. Thus it does not make sense for a module to resolve a relocation against .TOC. to the kernel's .TOC. value. A module has its own .TOC., and indeed the powerpc64 module relocation processing ignores the kernel value of .TOC. and instead calculates a module-local value. This patch removes code involved in exporting the kernel .TOC., tweaks modpost to ignore an undefined .TOC., and the module loader to twiddle the section symbol so that .TOC. isn't seen as undefined. Note that if the kernel was compiled with -msingle-pic-base then ELFv2 would not have function global entry code setting up r2. In that case the module call stubs would need to be modified to set up r2 using the kernel .TOC. value, requiring some of this code to be reinstated. mpe: Furthermore a change in binutils master (not yet released) causes the current way we handle the TOC to no longer work when building with MODVERSIONS=y and RELOCATABLE=n. The symptom is that modules can not be loaded due to there being no version found for TOC. Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Alan Modra <amodra@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-14modpost: don't add a trailing wildcard for OF module aliasesJavier Martinez Canillas1-2/+1
Commit ac551828993e ("modpost: i2c aliases need no trailing wildcard") removed the wildcard at the end of the I2C module aliases because I2C devices have no IDs so the aliases are just arbitrary device names. This is also true for OF modaliases since a compatible string is used to define a specific IP hardware block. So the modalias should match a specific compatible string and not attempt to match a compatible string whose name matches the beginning of another one. For example, the following driver module: $ modinfo cros_ec_keyb | grep alias alias: platform:cros-ec-keyb alias: of:N*T*Cgoogle,cros-ec-keyb* will be tried to be loaded for an alias of:N*T*Cgoogle,cros-ec-keyb-v2 but there could be a different driver that supports the device for that compatible string so it's better to remove the trailing wildcard for OF. Also, remove the word "always" from the add_wildcard() function comment since that was carried from the time where a wildcard was always added at the end of the module alias for all the devices. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Suggested-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-14Drivers: hv: vmbus: Use uuid_le type consistentlyK. Y. Srinivasan1-1/+1
Consistently use uuid_le type in the Hyper-V driver code. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-7/+30
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Nothing exciting, minor tweaks and cleanups" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scripts: [modpost] add new sections to white list modpost: Add flag -E for making section mismatches fatal params: don't ignore the rest of cmdline if parse_one() fails modpost: abort if a module symbol is too long
2015-11-06Merge tag 'sound-4.4-rc1' of ↵Linus Torvalds2-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Here is the first batch of updates for sound system on 4.4-rc1. Again at this time, the update looks fairly calm; no big changes in either ALSA core or ASoC infrastructures, rather all small cleanups, in addition to the new stuff as usual. The biggest changes are about Firewire sound devices. It gained lots of new device support, and MIDI functionality. Also there are updates for a few still working-in-progress stuff (topology API and ASoC skylake), too. But overall, this update should give no big surprise. Some highlights are below: Core: - A few more Kconfig items for tinification; it's marked as EXPERT, so normal user should't be bothered :) - Refactoring with a new PCM hw_constraint helper - Removal of unused transfer_ack_{begin,end} PCM callbacks Firewire: - Restructuring of code subtree, lots of refactoring - Support AMDTP variants - New driver for Digidesign 002/003 family - Adds support for TASCAM FireOne to ALSA OXFW driver - Add MIDI support to TASCAM and Digi00x devices HD-Audio: - Automated modalias generation for codec drivers, finally - Improvement on heuristics for setting mixer name - A few fixes for longstanding bugs on Creative CA0132 cards - Addition of audio rate callback with i915 communication - Fix suspend issue on recent Dell XPS - Intel Lewisburg controller support ASoC: - Updates to the topology userspace interface - Big updates to the Renesas support (rcar) - More updates for supporting Intel Sky Lake systems - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10, Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825, Rockchip S/PDIF, and Atmel class D amplifier USB-Audio: - A fix for newer Roland MIDI devices - Quirks and workarounds for Zoom R16/24 device Misc: - A few fixes for some old Cirrus CS46xx PCI sound boards - Yet another fixes for some old ESS Maestro3 PCI sound boards" * tag 'sound-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (330 commits) ALSA: hda - Add Intel Lewisburg device IDs Audio ALSA: hda - Apply pin fixup for HP ProBook 6550b ALSA: hda - Fix lost 4k BDL boundary workaround ALSA: maestro3: Fix Allegro mute until master volume/mute is touched ALSA: maestro3: Enable docking support for Dell Latitude C810 ALSA: firewire-digi00x: add another rawmidi character device for MIDI control ports ALSA: firewire-digi00x: add MIDI operations for MIDI control port ALSA: firewire-digi00x: rename identifiers of MIDI operation for physical ports ALSA: cs46xx: Fix suspend for all channels ALSA: cs46xx: Fix Duplicate front for CS4294 and CS4298 codecs ALSA: DocBook: Add soc-ops.c and soc-compress.c ALSA: hda - Add / fix kernel doc comments ALSA: Constify ratden/ratnum constraints ALSA: hda - Disable 64bit address for Creative HDA controllers ALSA: hda/realtek - Dell XPS one ALC3260 speaker no sound after resume back ALSA: hda/ca0132 - Convert leftover pr_info() and pr_err() ASoC: fsl: Use #ifdef instead of #if for CONFIG_PM_SLEEP ASoC: rt5645: Sort the order for register bit defines ASoC: dwc: add check for master/slave format ASoC: rt5645: Add the HWEQ for the speaker output ...
2015-10-26scripts: [modpost] add new sections to white listNoam Camus1-0/+2
In our ARC toolchain the default linker script includes special sections used for code and data located in special fast memory. To avoid warnings we add these sections i.e. .cmem* and .fmt_slot* to white list. Signed-off-by: Noam Camus <noamc@ezchip.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-10-20ALSA: hda - Add hduadio support to DEVTABLESubhransu S. Prusty2-0/+22
For generating modalias entries automatically, move the definition of struct hda_device_id to linux/mod_devicetable.h and add the handling of this record in file2alias helper. The new modalias is represented with combination of vendor id, device id, and api version as "hdaudio:vNrNaN". This patch itself doesn't convert the existing modaliases. Since they were added manually, this patch won't give any regression by itself at this point. [Modified the modalias format to adapt the api_version field, and drop invalid ANY_ID definition by tiwai] Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-06modpost: Add flag -E for making section mismatches fatalNicolas Boichat1-7/+17
The section mismatch warning can be easy to miss during the kernel build process. Allow it to be marked as fatal to be easily caught and prevent bugs from slipping in. Setting CONFIG_SECTION_MISMATCH_WARN_ONLY=y causes these warnings to be non-fatal, since there are a number of section mismatches when using allmodconfig on some architectures, and we do not want to break these builds by default. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Change-Id: Ic346706e3297c9f0d790e3552aa94e5cff9897a6 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-09-20mei: bus: add client protocol version to the device aliasTomas Winkler2-1/+4
The device alias now looks like mei:S:uuid:N:* In that way we can bind different drivers to clients with different protocol versions if required. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-20mei: make modules.alias UUID information easier to readPrarit Bhargava1-3/+5
scripts/mod/file2alias.c:add_uuid() convert UUID into a single string which does not conform to the standard little endian UUID formatting. This patch changes add_uuid() to output same format as %pUL and modifies the mei driver to match the change. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-08Merge branch 'kbuild' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull core kbuild updates from Michal Marek: - modpost portability fix - linker script fix - genksyms segfault fix - fixdep cleanup - fix for clang detection * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix clang detection kbuild: fixdep: drop meaningless hash table initialization kbuild: fixdep: optimize code slightly genksyms: Regenerate parser genksyms: Duplicate function pointer type definitions segfault kbuild: Fix .text.unlikely placement Avoid conflict with host definitions when cross-compiling
2015-08-20Avoid conflict with host definitions when cross-compilingPavel Fedin1-0/+6
Certain platforms (e. g. BSD-based ones) define some ELF constants according to host. This patch fixes problems with cross-building Linux kernel on these platforms (e. g. building ARM 32-bit version on x86-64 host). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-08-08modpost: abort if a module symbol is too longTakashi Iwai1-0/+11
Module symbols have a limited length, but currently the build system allows the build finishing even if the driver code contains a too long symbol name, which eventually overflows the modversion_info[] item. The compiler may catch at compiling *.mod.c like CC xxx.mod.o xxx.mod.c:18:16: warning: initializer-string for array of chars is too long but it's merely a warning. This patch adds the check of the symbol length in modpost and stops the build properly. Currently MODULE_NAME_LEN is defined in modpost.c instead of referring to the definition in kernel header because including linux/module.h is messy and we must cover cross-compilation. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-07-08Merge tag 'pm+acpi-4.2-rc2' of ↵Linus Torvalds2-2/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are fixes on top of the previous PM+ACPI pull requests (including one fix for a 4.1 regression) and two commits adding _CLS-based device enumeration support to the ACPI core and the ATA subsystem that waited for the latest ACPICA changes to be merged. Specifics: - Fix for an ACPI resources management regression introduced during the 4.1 cycle (that unfortunately went into -stable) effectively reverting the bad commit along with the recent fixups on top of it and using an alternative approach to address the underlying issue (Rafael J Wysocki). - Fix for a memory leak and an incorrect return value in an error code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J Wysocki). - Fix for a leftover dangling pointer in an error code path in the new wakeup IRQ support code (Rafael J Wysocki). - Fix to prevent infinite loops (due to errors in other places) from happening in the core generic PM domains support code (Geert Uytterhoeven). - Hibernation documentation update/clarification (Uwe Geuder). - Support for _CLS-based device enumeration in the ACPI core and in the ATA subsystem (Suravee Suthikulpanit)" * tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / wakeirq: Avoid setting power.wakeirq too hastily ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching PM / hibernate: clarify resume documentation PM / Domains: Avoid infinite loops in attach/detach code ACPI / LPSS: Fix up acpi_lpss_create_device() ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage
2015-07-08modpost: work correctly with tile coldtext sectionsChris Metcalf1-1/+2
The tilegx and tilepro compilers use .coldtext for their unlikely executed text section name, so an __attribute__((cold)) function will (when compiled with higher optimization levels) land in the .coldtext section. Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS so we don't get warnings about referencing such a section in an __ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c so that it uses plain ".coldtext" instead of ".coldtext.memcpy". The latter naming is a relic of an earlier use of -ffunction-sections, which we no longer use by default. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2015-07-07ACPI / scan: Add support for ACPI _CLS device matchingSuthikulpanit, Suravee2-2/+32
Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver acpi_match_table to match devices. However, for generic drivers, we do not want to list _HID for all supported devices. Also, certain classes of devices do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, which specifies PCI-defined class code (i.e. base-class, subclass and programming interface). This patch adds support for matching ACPI devices using the _CLS method. To support loadable module, current design uses _HID or _CID to match device's modalias. With the new way of matching with _CLS this would requires modification to the current ACPI modalias key to include _CLS. This patch appends PCI-defined class-code to the existing ACPI modalias as following. acpi:<HID>:<CID1>:<CID2>:..:<CIDn>:<bbsspp>: E.g: # cat /sys/devices/platform/AMDI0600:00/modalias acpi:AMDI0600:010601: where bb is th base-class code, ss is te sub-class code, and pp is the programming interface code Since there would not be _HID/_CID in the ACPI matching table of the driver, this patch adds a field to acpi_device_id to specify the matching _CLS. static const struct acpi_device_id ahci_acpi_match[] = { { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) }, {}, }; In this case, the corresponded entry in modules.alias file would be: alias acpi*:010601:* ahci_platform Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-26Merge tag 'usb-4.2-rc1' of ↵Linus Torvalds2-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...
2015-05-31mei: fix up uuid matchingGreg Kroah-Hartman1-2/+5
A previous commit, c93b76b34b4d ("mei: bus: report also uuid in module alias") caused a build error as I missed applying a needed patch to add some macros to uapi/linux/uuid.h. Instead of those additional macros, change the mei code to use the existing uuid structure directly. Fixes: c93b76b34b4d Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: report also uuid in module aliasTomas Winkler2-2/+17
In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13usb: add bus type for USB ULPIHeikki Krogerus2-0/+17
UTMI+ Low Pin Interface (ULPI) is a commonly used PHY interface for USB 2.0. The ULPI specification describes a standard set of registers which the vendors can extend for their specific needs. ULPI PHYs provide often functions such as charger detection and ADP sensing and probing. There are two major issues that the bus type is meant to tackle: Firstly, ULPI registers are accessed from the controller. The bus provides convenient method for the controller drivers to share that access with the actual PHY drivers. Secondly, there are already platforms that assume ULPI PHYs are runtime detected, such as many Intel Baytrail based platforms. They do not provide any kind of hardware description for the ULPI PHYs like separate ACPI device object that could be used to enumerate a device from. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-22Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-54/+287
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Quentin opened a can of worms by adding extable entry checking to modpost, but most architectures seem fixed now. Thanks to all involved. Last minute rebase because I noticed a "[PATCH]" had snuck into a commit message somehow" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: modpost: don't emit section mismatch warnings for compiler optimizations modpost: expand pattern matching to support substring matches modpost: do not try to match the SHT_NUL section. modpost: fix extable entry size calculation. modpost: fix inverted logic in is_extable_fault_address(). modpost: handle -ffunction-sections modpost: Whitelist .text.fixup and .exception.text params: handle quotes properly for values not of form foo="bar". modpost: document the use of struct section_check. modpost: handle relocations mismatch in __ex_table. scripts: add check_extable.sh script. modpost: mismatch_handler: retrieve tosym information only when needed. modpost: factorize symbol pretty print in get_pretty_name(). modpost: add handler function pointer to sectioncheck. modpost: add .sched.text and .kprobes.text to the TEXT_SECTIONS list. modpost: add strict white-listing when referencing sections. module: do not print allocation-fail warning on bogus user buffer size kernel/module.c: fix typos in message about unused symbols
2015-04-22modpost: don't emit section mismatch warnings for compiler optimizationsPaul Gortmaker1-0/+21
Currently an allyesconfig build [gcc-4.9.1] can generate the following: WARNING: vmlinux.o(.text.unlikely+0x3864): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask which comes from the cpumask_empty usage in arch/x86/kernel/nmi_selftest.c. Normally we would not see a symbol entry for cpumask_empty since it is: static inline bool cpumask_empty(const struct cpumask *srcp) however in this case, the variant of the symbol gets emitted when GCC does constant propagation optimization. Fix things up so that any locally optimized constprop variants don't warn when accessing variables that live in the __init sections. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-22modpost: expand pattern matching to support substring matchesPaul Gortmaker1-1/+11
Currently the match() function supports a leading * to match any prefix and a trailing * to match any suffix. However there currently is not a combination of both that can be used to target matches of whole families of functions that share a common substring. Here we expand the *foo and foo* match to also support *foo* with the goal of targeting compiler generated symbol names that contain strings like ".constprop." and ".isra." Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-22modpost: do not try to match the SHT_NUL section.Quentin Casasnovas1-0/+9
Trying to match the SHT_NUL section isn't useful and causes build failures on parisc and mn10300 since the addition of section strict white-listing and __ex_table sanitizing. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: 050e57fd5936 ("modpost: add strict white-listing when referencing....") Fixes: 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.") Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-22modpost: fix extable entry size calculation.Quentin Casasnovas1-6/+10
As Guenter pointed out, we were never really calculating the extable entry size because the pointer arithmetic was simply wrong. We want to check we're handling the second relocation in __ex_table to infer an entry size, but we were using (void*) pointers instead of Elf_Rel[a]* ones. This fixes the problem by moving that check in the caller (since we can deal with different types of relocations) and add is_second_extable_reloc() to make the whole thing more readable. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Reported-by: Guenter Roeck <linux@roeck-us.net> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-22modpost: fix inverted logic in is_extable_fault_address().Quentin Casasnovas1-1/+6
As Guenter pointed out, we want to assert that extable_entry_size has been discovered and not the other way around. Moreover, this sanity check is only valid when we're not dealing with the first relocation in __ex_table, since we have not discovered the extable entry size at that point. This was leading to a divide-by-zero on some architectures and make the build fail. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Reported-by: Guenter Roeck <linux@roeck-us.net> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-22modpost: handle -ffunction-sectionsRusty Russell1-1/+1
52dc0595d540 introduced OTHER_TEXT_SECTIONS for identifying what sections could validly have __ex_table entries. Unfortunately, it wasn't tested with -ffunction-sections, which some architectures use. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-22modpost: Whitelist .text.fixup and .exception.textThierry Reding1-1/+1
32-bit and 64-bit ARM use these sections to store executable code, so they must be whitelisted in modpost's table of valid text sections. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-13modpost: document the use of struct section_check.Quentin Casasnovas1-0/+20
struct section_check is used as a generic way of describing what relocations are authorized/forbidden when running modpost. This commit tries to describe how each field is used. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Fixed "mist"ake)
2015-04-13modpost: handle relocations mismatch in __ex_table.Quentin Casasnovas1-0/+141
__ex_table is a simple table section where each entry is a pair of addresses - the first address is an address which can fault in kernel space, and the second address points to where the kernel should jump to when handling that fault. This is how copy_from_user() does not crash the kernel if userspace gives a borked pointer for example. If one of these addresses point to a non-executable section, something is seriously wrong since it either means the kernel will never fault from there or it will not be able to jump to there. As both cases are serious enough, we simply error out in these cases so the build fails and the developper has to fix the issue. In case the section is executable, but it isn't referenced in our list of authorized sections to point to from __ex_table, we just dump a warning giving more information about it. We do this in case the new section is executable but isn't supposed to be executed by the kernel. This happened with .altinstr_replacement, which is executable but is only used to copy instructions from - we should never have our instruction pointer pointing in .altinstr_replacement. Admitedly, a proper fix in that case would be to just set .altinstr_replacement NX, but we need to warn about future cases like this. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (added long casts)
2015-04-13modpost: mismatch_handler: retrieve tosym information only when needed.Quentin Casasnovas1-3/+4
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-13modpost: factorize symbol pretty print in get_pretty_name().Quentin Casasnovas1-11/+12
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-13modpost: add handler function pointer to sectioncheck.Quentin Casasnovas1-26/+42
This will be useful when we want to have special handlers which need to go through more hops to print useful information to the user. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-13modpost: add .sched.text and .kprobes.text to the TEXT_SECTIONS list.Quentin Casasnovas1-1/+2
sched.text and .kprobes.text should behave exactly like .text with regards to how we should warn about referencing sections which might get discarded at runtime. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-13modpost: add strict white-listing when referencing sections.Quentin Casasnovas1-15/+19
Prints a warning when a section references a section outside a strict white-list. This will be useful to print a warning if __ex_table references a non-executable section. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-31MIPS: Add CDMM bus supportJames Hogan2-0/+19
Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in the standard Linux device model. Each device attached via CDMM is discoverable via an 8-bit type identifier and may contain a number of blocks of memory mapped registers in the CDMM region. IRQs are expected to be handled separately. Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices, all the driver callbacks take place from workqueues which are run on the right CPU for the device in question, so that the driver doesn't need to be as concerned about which CPU it is running on. Callbacks also exist for when CPUs are taken offline, so that any per-CPU resources used by the driver can be disabled so they don't get forcefully migrated. CDMM devices are created as children of the CPU device they are attached to. Any existing CDMM configuration by the bootloader will be inherited, however platforms wishing to enable CDMM should implement the weak mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver knows where it should put the CDMM region in the physical address space if the bootloader hasn't already enabled it. A mips_cdmm_early_probe() function is also provided to allow early boot or particularly low level code to set up the CDMM region and probe for a specific device type, for example early console or KGDB IO drivers for the EJTAG Fast Debug Channel (FDC) CDMM device. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9599/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - eBPF JIT compiler for arm64 - CPU suspend backend for PSCI (firmware interface) with standard idle states defined in DT (generic idle driver to be merged via a different tree) - Support for CONFIG_DEBUG_SET_MODULE_RONX - Support for unmapped cpu-release-addr (outside kernel linear mapping) - set_arch_dma_coherent_ops() implemented and bus notifiers removed - EFI_STUB improvements when base of DRAM is occupied - Typos in KGDB macros - Clean-up to (partially) allow kernel building with LLVM - Other clean-ups (extern keyword, phys_addr_t usage) * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (51 commits) arm64: Remove unneeded extern keyword ARM64: make of_device_ids const arm64: Use phys_addr_t type for physical address aarch64: filter $x from kallsyms arm64: Use DMA_ERROR_CODE to denote failed allocation arm64: Fix typos in KGDB macros arm64: insn: Add return statements after BUG_ON() arm64: debug: don't re-enable debug exceptions on return from el1_dbg Revert "arm64: dmi: Add SMBIOS/DMI support" arm64: Implement set_arch_dma_coherent_ops() to replace bus notifiers of: amba: use of_dma_configure for AMBA devices arm64: dmi: Add SMBIOS/DMI support arm64: Correct ftrace calls to aarch64_insn_gen_branch_imm() arm64:mm: initialize max_mapnr using function set_max_mapnr setup: Move unmask of async interrupts after possible earlycon setup arm64: LLVMLinux: Fix inline arm64 assembly for use with clang arm64: pageattr: Correctly adjust unaligned start addresses net: bpf: arm64: fix module memory leak when JIT image build fails arm64: add PSCI CPU_SUSPEND based cpu_suspend support arm64: kernel: introduce cpu_init_idle CPU operation ...
2014-10-02aarch64: filter $x from kallsymsKyle McMartin1-1/+1
Similar to ARM, AArch64 is generating $x and $d syms... which isn't terribly helpful when looking at %pF output and the like. Filter those out in kallsyms, modpost and when looking at module symbols. Seems simplest since none of these check EM_ARM anyway, to just add it to the strchr used, rather than trying to make things overly complicated. initcall_debug improves: dmesg_before.txt: initcall $x+0x0/0x154 [sg] returned 0 after 26331 usecs dmesg_after.txt: initcall init_sg+0x0/0x154 [sg] returned 0 after 15461 usecs Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-08-27modpost: simplify file name generation of *.mod.c filesMathias Krause1-1/+1
Avoid the variable length array (vla), just use PATH_MAX instead. This not only makes this code clang friedly, it also leads to a code size reduction: text data bss dec hex filename 51765 2224 12416 66405 10365 scripts/mod/modpost.old 51677 2224 12416 66317 1030d scripts/mod/modpost.new Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27modpost: reduce visibility of symbols and constify r/o arraysMathias Krause1-11/+12
Internally used symbols of modpost don't need to be externally visible; make them static. Also constify the string arrays so they resist in the r/o section instead of being runtime writable. Those changes lead to a small size reduction as can be seen below: text data bss dec hex filename 51381 2640 12416 66437 10385 scripts/mod/modpost.old 51765 2224 12416 66405 10365 scripts/mod/modpost.new Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-07-27scripts: modpost: Remove numeric suffix pattern matchingRasmus Villemoes1-39/+10
For several years, the pattern "foo$" has effectively been treated as equivalent to "foo" due to a bug in the (misnamed) helper number_prefix(). This hasn't been observed to cause any problems, so remove the broken $ functionality and change all foo$ patterns to foo. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-07-27scripts: modpost: fix compilation warningMichal Nazarewicz1-5/+4
The scripts/mod/modpost.c triggers the following warning: scripts/mod/modpost.c: In function ‘remove_dot’: scripts/mod/modpost.c:1710:10: warning: ignoring return value of ‘strtoul’, declared with attribute warn_unused_result [-Wunused-result] The remove_dot function that calls strtoul does not care about the numeric value of the string that is parsed but only looks for the end of the numeric sequence. As such, it's equivalent to just skip over all digits. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-06-12Merge branch 'misc' of ↵Linus Torvalds5-41/+37
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild misc updates from Michal Marek: "This is the non-critical part of kbuild for v3.16-rc1: - make deb-pkg can do s390x and arm64 - new patterns in scripts/tags.sh - scripts/tags.sh skips userspace tools' sources (which sometimes have copies of kernel structures) and symlinks - improvements to the objdiff tool - two new coccinelle patches - other minor fixes" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts: objdiff: support directories for the augument of record command scripts: objdiff: fix a comment scripts: objdiff: change the extension of disassembly from .o to .dis scripts: objdiff: improve path flexibility for record command scripts: objdiff: remove unnecessary code scripts: objdiff: direct error messages to stderr scripts: objdiff: get the path to .tmp_objdiff more simply deb-pkg: Add automatic support for s390x architecture coccicheck: Add unneeded return variable test kbuild: Fix a typo in documentation kbuild: trivial - use tabs for code indent where possible kbuild: trivial - remove trailing empty lines coccinelle: Check for missing NULL terminators in of_device_id tables scripts/tags.sh: ignore symlink'ed source files scripts/tags.sh: add regular expression replacement pattern for memcg builddeb: add arm64 in the supported architectures builddeb: use $OBJCOPY variable instead of objcopy scripts/tags.sh: ignore code of user space tools scripts/tags.sh: add pattern for DEFINE_HASHTABLE .gitignore: ignore Module.symvers in all directories
2014-06-11Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Most of this is cleaning up various driver sysfs permissions so we can re-add the perm check (we unified the module param and sysfs checks, but the module ones were stronger so we weakened them temporarily). Param parsing gets documented, and also "--" now forces args to be handed to init (and ignored by the kernel). Module NX/RO protections get tightened: we now set them before calling parse_args()" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: set nx before marking module MODULE_STATE_COMING. samples/kobject/: avoid world-writable sysfs files. drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files. drivers/staging/speakup/: avoid world-writable sysfs files. drivers/regulator/virtual: avoid world-writable sysfs files. drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files. drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files. drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files. drivers/mtd/devices/docg3.c: avoid world-writable sysfs files. speakup: fix incorrect perms on speakup_acntsa.c cpumask.h: silence warning with -Wsign-compare Documentation: Update kernel-parameters.tx param: hand arguments after -- straight to init modpost: Fix resource leak in read_dump()
2014-06-10kbuild: trivial - use tabs for code indent where possibleMasahiro Yamada3-39/+37
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-10kbuild: trivial - remove trailing empty linesMasahiro Yamada2-2/+0
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>