summaryrefslogtreecommitdiffstats
path: root/scripts/mod/modpost.h
AgeCommit message (Collapse)AuthorFilesLines
2020-06-06modpost: change elf_info->size to size_tMasahiro Yamada1-1/+1
Align with the mmap / munmap APIs. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: strip .o from modname before calling new_module()Masahiro Yamada1-1/+1
new_module() conditionally strips the .o because the modname has .o suffix when it is called from read_symbols(), but no .o when it is called from read_dump(). It is clearer to strip .o in read_symbols(). I also used flexible-array for mod->name. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->skip struct memberMasahiro Yamada1-1/+0
The meaning of 'skip' is obscure since it does not explain "what to skip". mod->skip is set when it is vmlinux or the module info came from a dump file. So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump). For the check in write_namespace_deps_files(), mod->is_vmlinux is unneeded because the -d option is not passed in the first pass of modpost. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: add mod->is_vmlinux struct memberMasahiro Yamada1-0/+1
is_vmlinux() is called in several places to check whether the current module is vmlinux or not. It is faster and clearer to check mod->is_vmlinux flag. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->is_dot_o struct memberMasahiro Yamada1-1/+0
Previously, there were two cases where mod->is_dot_o is unset: [1] the executable 'vmlinux' in the second pass of modpost [2] modules loaded by read_dump() I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'. Now that modpost does not parse the executable 'vmlinux', this case does not happen. [2] is obscure, maybe a bug. Module.symver stores module paths without extension. So, none of modules loaded by read_dump() has the .o suffix, and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because handle_symbol() is not called for the case. To sum up, all the parsed ELF files are .o files. mod->is_dot_o is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove get_next_text() and make {grab,release_}file staticMasahiro Yamada1-3/+0
get_next_line() is no longer used. Remove. grab_file() and release_file() are only used in modpost.c. Make them static. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: add read_text_file() and get_line() helpersMasahiro Yamada1-0/+2
modpost uses grab_file() to open a file, but it is not suitable for a text file because the mmap'ed file is not terminated by null byte. Actually, I see some issues for the use of grab_file(). The new helper, read_text_file() loads the whole file content into a malloc'ed buffer, and appends a null byte. Then, get_line() reads each line. To handle text files, I intend to replace as follows: grab_file() -> read_text_file() get_new_line() -> get_line() Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: drop RCS/CVS $Revision handling in MODULE_VERSION()Masahiro Yamada1-4/+0
As far as I understood, this code gets rid of '$Revision$' or '$Revision:' of CVS, RCS or whatever in MODULE_VERSION() tags. Remove the primeval code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: track if the symbol origin is a dump file or ELF objectMasahiro Yamada1-0/+1
The meaning of sym->kernel is obscure; it is set for in-kernel symbols loaded from Modules.symvers. This happens only when we are building external modules, and it is used to determine whether to dump symbols to $(KBUILD_EXTMOD)/Modules.symvers It is clearer to remember whether the symbol or module came from a dump file or ELF object. This changes the KBUILD_EXTRA_SYMBOLS behavior. Previously, symbols loaded from KBUILD_EXTRA_SYMBOLS are accumulated into the current $(KBUILD_EXTMOD)/Modules.symvers Going forward, they will be only used to check symbol references, but not dumped into the current $(KBUILD_EXTMOD)/Modules.symvers. I believe this makes more sense. sym->vmlinux will have no user. Remove it too. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-26modpost,fixdep: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-13modpost: rework and consolidate logging interfaceJessica Yu1-3/+11
Rework modpost's logging interface by consolidating merror(), warn(), and fatal() to use a single function, modpost_log(). Introduce different logging levels (WARN, ERROR, FATAL) as well. The purpose of this cleanup is to reduce code duplication when deciding whether or not to warn or error out based on a condition. Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-11-23modpost: refactor namespace_from_kstrtabns() to not hard-code section nameMasahiro Yamada1-1/+0
Currently, namespace_from_kstrtabns() relies on the fact that namespace strings are recorded in the __ksymtab_strings section. Actually, it is coded in include/linux/export.h, but modpost does not need to hard-code the section name. Elf_Sym::st_shndx holds the index of the relevant section. Using it is a more portable way to get the namespace string. Make namespace_from_kstrtabns() simply call sym_get_data(), and delete the info->ksymtab_strings . While I was here, I added more 'const' qualifiers to pointers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11modpost: dump missing namespaces into a single modules.nsdeps fileMasahiro Yamada1-2/+2
The modpost, with the -d option given, generates per-module .ns_deps files. Kbuild generates per-module .mod files to carry module information. This is convenient because Make handles multiple jobs in parallel when the -j option is given. On the other hand, the modpost always runs as a single thread. I do not see a strong reason to produce separate .ns_deps files. This commit changes the modpost to generate just one file, modules.nsdeps, each line of which has the following format: <module_name>: <list of missing namespaces> Please note it contains *missing* namespaces instead of required ones. So, modules.nsdeps is empty if the namespace dependency is all good. This will work more efficiently because spatch will no longer process already imported namespaces. I removed the '(if needed)' from the nsdeps log since spatch is invoked only when needed. This also solves the stale .ns_deps problem reported by Jessica Yu: https://lkml.org/lkml/2019/10/28/467 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Matthias Maennich <maennich@google.com> Tested-by: Matthias Maennich <maennich@google.com>
2019-10-18symbol namespaces: revert to previous __ksymtab name schemeMatthias Maennich1-0/+1
The introduction of Symbol Namespaces changed the naming schema of the __ksymtab entries from __kysmtab__symbol to __ksymtab_NAMESPACE.symbol. That caused some breakages in tools that depend on the name layout in either the binaries(vmlinux,*.ko) or in System.map. E.g. kmod's depmod would not be able to read System.map without a patch to support symbol namespaces. A warning reported by depmod for namespaced symbols would look like depmod: WARNING: [...]/uas.ko needs unknown symbol usb_stor_adjust_quirks In order to address this issue, revert to the original naming scheme and rather read the __kstrtabns_<symbol> entries and their corresponding values from __ksymtab_strings to update the namespace values for symbols. After having read all symbols and handled them in handle_modversions(), the symbols are created. In a second pass, read the __kstrtabns_ entries and update the namespaces accordingly. Fixes: 8651ec01daed ("module: add support for symbol namespaces.") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10modpost: add support for generating namespace dependenciesMatthias Maennich1-0/+2
This patch adds an option to modpost to generate a <module>.ns_deps file per module, containing the namespace dependencies for that module. E.g. if the linked module my-module.ko would depend on the symbol myfunc.MY_NS in the namespace MY_NS, the my-module.ns_deps file created by modpost would contain the entry MY_NS to express the namespace dependency of my-module imposed by using the symbol myfunc. These files can subsequently be used by static analysis tools (like coccinelle scripts) to address issues with missing namespace imports. A later patch of this series will introduce such a script 'nsdeps' and a corresponding make target to automatically add missing MODULE_IMPORT_NS() definitions to the module's sources. For that it uses the information provided in the generated .ns_deps files. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10modpost: add support for symbol namespacesMatthias Maennich1-0/+7
Add support for symbols that are exported into namespaces. For that, extract any namespace suffix from the symbol name. In addition, emit a warning whenever a module refers to an exported symbol without explicitly importing the namespace that it is defined in. This patch consistently adds the namespace suffix to symbol names exported into Module.symvers. Example warning emitted by modpost in case of the above violation: WARNING: module ums-usbat uses symbol usb_stor_resume from namespace USB_STORAGE, but does not import it. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-20Avoid conflict with host definitions when cross-compilingPavel Fedin1-0/+6
Certain platforms (e. g. BSD-based ones) define some ELF constants according to host. This patch fixes problems with cross-building Linux kernel on these platforms (e. g. building ARM 32-bit version on x86-64 host). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2014-02-13Kbuild, lto: Drop .number postfixes in modpostAndi Kleen1-1/+1
LTO turns all global symbols effectively into statics. This has the side effect that they all have a .NUMBER postfix to make them unique. In modpost drop this postfix because it confuses it. Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1391846481-31491-8-git-send-email-ak@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-09modpost: Fix modpost license checking of vmlinux.oFrank Rowand1-0/+1
Commit f02e8a6596b7 ("module: Sort exported symbols") sorts symbols placing each of them in its own elf section. This sorting and merging into the canonical sections are done by the linker. Unfortunately modpost to generate Module.symvers file parses vmlinux.o (which is not linked yet) and all modules object files (which aren't linked yet). These aren't sanitized by the linker yet. That breaks modpost that can't detect license properly for modules. This patch makes modpost aware of the new exported symbols structure. [ This above is a slightly corrected version of the explanation of the problem, copied from commit 62a2635610db ("modpost: Fix modpost's license checking V3"). That commit fixed the problem for module object files, but not for vmlinux.o. This patch fixes modpost for vmlinux.o. ] Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Alessio Igor Bogani <abogani@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-19modpost: Update 64k section support for binutils 2.18.50Anders Kaseorg1-19/+8
Binutils 2.18.50 made a backwards-incompatible change in the way it writes ELF objects with over 65280 sections, to improve conformance with the ELF specification and interoperability with other ELF tools. Specifically, it no longer adds 256 to section indices SHN_LORESERVE and higher to skip over the reserved range SHN_LORESERVE through SHN_HIRESERVE; those values are only considered special in the st_shndx field, and not in other places where section indices are stored. See: http://sourceware.org/bugzilla/show_bug.cgi?id=5900 http://groups.google.com/group/generic-abi/browse_thread/thread/e8bb63714b072e67/6c63738f12cc8a17 Signed-off-by: Anders Kaseorg <andersk@ksplice.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-08-03modpost: support objects with more than 64k sectionsDenys Vlasenko1-0/+43
This patch makes modpost able to process object files with more than 64k sections. Needed for huge kernel builds (allyesconfig, for example) with -ffunction-sections. 64k sections handling is covered, for example, by this document: "IA-64 gABI Proposal 74: Section Indexes" http://www.codesourcery.com/public/cxx-abi/abi/prop-74-sindex.html Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Anders Kaseorg <andersk@mit.edu> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-15Kbuild: clear marker out of modpostWenji Huang1-3/+0
Remove the unnecessary functions and variables. Signed-off-by: Wenji Huang <wenji.huang@oracle.com> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-03-23kbuild: soften modpost checks when doing cross buildsSam Ravnborg1-0/+1
The module alias support in the kernel have a consistency check where it is checked that the size of a structure in the kernel and on the build host are the same. For cross builds this check does not make sense so detect when we do cross builds and silently skip the check in these situations. This fixes a build bug for a wireless driver when cross building for arm. Acked-by: Michael Buesch <mb@bu3sch.de> Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: stable@kernel.org
2008-02-13Linux Kernel Markers: create modpost fileMathieu Desnoyers1-0/+3
This adds some new magic in the MODPOST phase for CONFIG_MARKERS. Analogous to the Module.symvers file, the build will now write a Module.markers file when CONFIG_MARKERS=y is set. This file lists the name, defining module, and format string of each marker, separated by \t characters. This simple text file can be used by offline build procedures for instrumentation code, analogous to how System.map and Module.symvers can be useful to have for kernels other than the one you are running right now. The strings are made easy to extract by having the __trace_mark macro define the name and format together in a single array called __mstrtab_* in the __markers_strings section. This is straightforward and reliable as long as the marker structs are always defined by this macro. It is an unreasonable amount of hairy work to extract the string pointers from the __markers section structs, which entails handling a relocation type for every machine under the sun. Mathieu : - Ran through checkpatch.pl Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: David Smith <dsmith@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28kbuild: try harder to find symbol names in modpostSam Ravnborg1-0/+2
The relocation record sometimes contained an address which was not an exactly match for a symbol. Implment some simple logic such that if there is a symbol within 20 bytes of the address contained in the relocation record then print the name of this symbol. With this change modpost could find symbol names for the remaining .init.text symbols in my allyesconfig build for x86_64. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kbuild: Use Elfnn_Half as replacement for Elfnn_SectionSam Ravnborg1-2/+2
The Elfnn_Section is not available on all platforms, noteworthy are cygwin. Use the safe replacement _Half. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-16kbuild: make better section mismatch reports on i386 and mipsAtsushi Nemoto1-0/+3
On i386 and MIPS, warn_sec_mismatch() sometimes fails to show usefull symbol name. This is because empty 'refsym' due to 0 r_addend value. This patch is to adjust r_addend value, consulting with apply_relocate() routine in kernel code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-21Revert "kbuild: make better section mismatch reports on i386, arm and mips"Linus Torvalds1-3/+0
This reverts commit f892b7d480eec809a5dfbd6e65742b3f3155e50e, which totally broke the build on x86 with CONFIG_RELOCATABLE (which, as far as I can tell, is the only case where it should even matter!) due to a SIGSEGV in modpost. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-19kbuild: make better section mismatch reports on i386, arm and mipsAtsushi Nemoto1-0/+3
On i386, ARM and MIPS, warn_sec_mismatch() sometimes fails to show usefull symbol name. This is because empty 'refsym' due to 0 r_addend value. This patch is to adjust r_addend value, consulting with apply_relocate() routine in kernel code. Without this patch: MODPOST vmlinux WARNING: init/built-in.o - Section mismatch: reference to .init.text: from .text between 'rest_init' (at offset 0xf4) and 'try_name' WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap' WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap' With this patch: MODPOST vmlinux WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap' WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap' Now modpost can detect "kernel_init" name (and whitelist it) and show "set_up_list3s" name. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02kbuild: distinguish between errors and warnings in modpostMatthew Wilcox1-0/+1
Some of modpost's warnings are fatal, and some are not. Adopt the compiler distinction between errors and warnings by calling merror() for fatal diagnostics and warn() for non-fatal ones. merror() was used as replacemtn for error() to avoid clash with glibc Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-07-01kbuild: warn when a moduled uses a symbol marked UNUSEDSam Ravnborg1-0/+2
We now have infrastructure in place to mark an EXPORTed symbol as unused. So the natural next step is to warn during buildtime when a module uses a symbol marked UNUSED. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09kbuild: check license compatibility when building modulesSam Ravnborg1-0/+1
Modules that uses GPL symbols can no longer be build with kbuild, the build will fail during the modpost step. When a GPL-incompatible module uses a EXPORT_SYMBOL_GPL_FUTURE symbol then warn during modpost so author are actually notified. The actual license compatibility check is shared with the kernel to make sure it is in sync. Patch originally from: Andreas Gruenbacher <agruen@suse.de> and Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09kbuild: export-type enhancement to modpost.cRam Pai1-0/+3
This patch provides the ability to identify the export-type of each exported symbols in Module.symvers. NOTE: It updates the Module.symvers file with the additional information as shown below. 0x0f8b92af platform_device_add_resources vmlinux EXPORT_SYMBOL_GPL 0xcf7efb2a ethtool_op_set_tx_csum vmlinux EXPORT_SYMBOL Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-05-21[PATCH] kbuild: fix modpost segfault for 64bit mipsel kernelAtsushi Nemoto1-2/+19
Here is an updated r_info layout fix. Please apply "check SHT_REL sections" patch before this. 64bit mips has different r_info layout. This patch fixes modpost segfault for 64bit little endian mips kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] kbuild: check SHT_REL sectionsAtsushi Nemoto1-0/+2
I found that modpost can not detect section mismatch on mips and i386. On mips64, the modpost (with r_info layout fix) can detect it. The current modpst only checks SHT_RELA section but I suppose SHT_REL section should be checked also. This patch does not contain r_info layout fix. I'll post an updated r_info layout fix on next mail. Check SHT_REL sections as like as SHT_RELA sections to detect section mismatch. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-08Revert "kbuild: fix modpost segfault for 64bit mipsel kernel"Linus Torvalds1-19/+0
This reverts commit c8d8b837ebe4b4f11e1b0c4a2bdc358c697692ed, which caused problems for the x86 build. Quoth Sam: "It was discussed on mips list but apparently the fix was bogus. I will not have time to look into it so mips can carry this local fix until we get a proper fix in mainline." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-30kbuild: fix modpost segfault for 64bit mipsel kernelAtsushi Nemoto1-0/+19
64bit mips has different r_info layout. This patch fixes modpost segfault for 64bit little endian mips kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-03kbuild: kill trailing whitespace in modpost & friendsSam Ravnborg1-4/+4
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-02-19kbuild: check for section mismatch during modpost stageSam Ravnborg1-0/+10
Section mismatch is identified as references to .init* sections from non .init sections. And likewise references to .exit.* sections outside .exit sections. .init.* sections are discarded after a module is initialized and references to .init.* sections are oops candidates. .exit.* sections are discarded when a module is built-in and thus references to .exit are also oops candidates. The checks were possible to do using 'make buildcheck' which called the two perl scripts: reference_discarded.pl and reference_init.pl. This patch just moves the same functionality inside modpost and the scripts are then obsoleted. They will though be kept for a while so users can do double checks - but note that some .o files are skipped by the perl scripts so result is not 1:1. All credit for the concept goes to Keith Owens who implemented the original perl scrips - this patch just moves it to modpost. Compared to the perl script the implmentation in modpost will be run for each kernel build - thus catching the error much sooner, but the downside is that the individual .o file are not always identified. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-02-19kbuild: use warn()/fatal() consistent in modpostSam Ravnborg1-1/+6
modpost.c provides warn() and fatal() - so use them all over the place. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+107
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!