summaryrefslogtreecommitdiffstats
path: root/scripts/depmod.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-09-09kbuild: modules_install: warn when missing System.map fileRandy Dunlap1-0/+1
If there is no System.map file for "make modules_install", scripts/depmod.sh will silently exit with success, having done nothing. Since this is an unexpected situation, change it to report a Warning for the missing file. The behavior is not changed except for the Warning message. The (previous) silent success and new Warning can be reproduced by: $ make mrproper; make defconfig $ make modules; make modules_install and since System.map is produced by "make vmlinux", the steps above omit producing the System.map file. Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-03kbuild: make missing $DEPMOD a Warning instead of an ErrorRandy Dunlap1-2/+2
When $DEPMOD is not found, only print a warning instead of exiting with an error message and error status: Warning: 'make modules_install' requires /sbin/depmod. Please install it. This is probably in the kmod package. Change the Error to a Warning because "not all build hosts for cross compiling Linux are Linux systems and are able to provide a working port of depmod, especially at the file patch /sbin/depmod." I.e., "make modules_install" may be used to copy/install the loadable modules files to a target directory on a build system and then transferred to an embedded device where /sbin/depmod is run instead of it being run on the build system. Fixes: 934193a654c1 ("kbuild: verify that $DEPMOD is installed") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18kbuild: verify that $DEPMOD is installedRandy Dunlap1-1/+7
Verify that 'depmod' ($DEPMOD) is installed. This is a partial revert of commit 620c231c7a7f ("kbuild: do not check for ancient modutils tools"). Also update Documentation/process/changes.rst to refer to kmod instead of module-init-tools. Fixes kernel bugzilla #198965: https://bugzilla.kernel.org/show_bug.cgi?id=198965 Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Cc: stable@vger.kernel.org # any kernel since 2012 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17depmod.sh: remove symbol prefix supportMasahiro Yamada1-22/+3
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX, hence the last argument of scripts/depmod.sh can be removed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-22depmod: pass -P $CONFIG_SYMBOL_PREFIXJames Hogan1-3/+23
On architectures which have symbol prefixes, depmod emits lots of warnings like this: WARNING: $module.ko needs unknown symbol $symbol This is because depmod isn't being passed the -P <symbol_prefix> arguments to specify the symbol prefix to ignore. This option is included since the 3.13 release of module-init-tools. Update scripts/depmod.sh to take extra arguments for the symbol prefix (required but may be empty), and update the main Makefile to always pass "$(CONFIG_SYMBOL_PREFIX)" to scripts/depmod.sh. If the provided symbol prefix is non-empty, scripts/depmod.sh checks if depmod --version reports module-init-tools with a version number < 3.13 otherwise it appends -P $SYMBOL_PREFIX to the depmod command line. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Michal Marek <mmarek@suse.cz> Cc: linux-kbuild@vger.kernel.org Cc: Mike Frysinger <vapier@gentoo.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-dist-devel@blackfin.uclinux.org Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-23kbuild: do not check for ancient modutils toolsLucas De Marchi1-6/+0
scripts/depmod.sh checks for the output of '-V' expecting that it has module-init-tools in it. It's a hack to prevent users from using modutils instead of module-init-tools, that only works with 2.4.x kernels. This however prints an annoying warning for kmod tool, that is currently replacing module-init-tools. Rather than putting another check for kmod's version, just remove it since users of 2.4.x kernel are unlikely to upgrade to 3.x, and if they do, let depmod fail in that case because they should know what they are doing. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: WANG Cong <amwang@redhat.com> Acked-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-12kbuild: Do not write to builddir in modules_installMichal Marek1-4/+6
Let depmod.sh create a temporary directory in /tmp instead of writing to the build directory as root. The mktemp utility should be available on any recent system (and there is already scripts/gen_initramfs_list.sh relying on it). Reported-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-06-09kbuild: Hack for depmod not handling X.Y versionsMichal Marek1-1/+24
depmod from module-init-tools < 3.13 and the busybox depmod check if the kernel release starts with <num>.<num>.<num>. To support these versions, we create a symlink with two numbers prepended. Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-06-09kbuild: Move depmod call to a separate scriptMichal Marek1-0/+25
Do not bloat the Makefile with multiline shell statements. No user-visible change intended. Signed-off-by: Michal Marek <mmarek@suse.cz>