summaryrefslogtreecommitdiffstats
path: root/scripts/Makefile.lib
AgeCommit message (Collapse)AuthorFilesLines
2019-07-27kbuild: remove unused single-used-mMasahiro Yamada1-2/+0
This is unused since commit 9f69a496f100 ("kbuild: split out *.mod out of {single,multi}-used-m rules"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17kbuild: compile-test headers listed in header-test-m as wellMasahiro Yamada1-1/+1
It will be useful to control the header-test by a tristate option. If CONFIG_FOO is a tristate option, you can write like this: header-test-$(CONFIG_FOO) += foo.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-11kbuild: fix compression errors getting ignoredHarald Seiler1-5/+5
A missing compression utility or other errors were not picked up by make and an empty kernel image was produced. By removing the &&, errors will no longer be ignored. Signed-off-by: Harald Seiler <hws@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-11kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctreeMasahiro Yamada1-1/+1
Commit 25b146c5b8ce ("kbuild: allow Kbuild to start from any directory") deprecated KBUILD_SRCTREE. It is only used in tools/testing/selftest/ to distinguish out-of-tree build. Replace it with a new boolean flag, building_out_of_srctree. I also replaced the conditional ($(srctree),.) because the next commit will allow an absolute path to be used for $(srctree) even when building in the source tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-09kbuild: support header-test-pattern-yMasahiro Yamada1-0/+11
In my view, most of headers can be self-contained. So, it would be tedious to add every header to header-test-y explicitly. We usually end up with "all headers with some exceptions". There are two types in exceptions: [1] headers that are never compiled as standalone units For examples, include/linux/compiler-gcc.h is not intended for direct inclusion. We should always exclude such ones. [2] headers that are conditionally compiled as standalone units Some headers can be compiled only for particular architectures. For example, include/linux/arm-cci.h can be compiled only for arm/arm64 because it requires <asm/arm-cci.h> to exist. Clang can compile include/soc/nps/mtm.h only for arc because it contains an arch-specific register in inline assembler. So, you can write Makefile like this: header-test- += linux/compiler-gcc.h header-test-$(CONFIG_ARM) += linux/arm-cci.h header-test-$(CONFIG_ARM64) += linux/arm-cci.h header-test-$(CONFIG_ARC) += soc/nps/mtm.h The new syntax header-test-pattern-y will be useful to specify "the rest". The typical usage is like this: header-test-pattern-y += */*.h This will add all the headers in sub-directories to the test coverage, excluding $(header-test-). In this regards, header-test-pattern-y behaves like a weaker variant of header-test-y. Caveat: The patterns in header-test-pattern-y are prefixed with $(srctree)/$(src)/ but not $(objtree)/$(obj)/. Stale generated headers are often left over when you traverse the git history without cleaning. Wildcard patterns for $(objtree) may match to stale headers, which could fail to compile. One pitfall is $(srctree)/$(src)/ and $(objtree)/$(obj)/ point to the same directory for in-tree building. So, header-test-pattern-y should be used with care since it can potentially match to stale headers. Caveat2: You could use wildcard for header-test-. For example, header-test- += asm-generic/% ... will exclude headers in asm-generic directory. Unfortunately, the wildcard character is '%' instead of '*' here because this is evaluated by $(filter-out ...) whereas header-test-pattern-y is evaluated by $(wildcard ...). This is a kludge, but seems useful in some places... Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jani Nikula <jani.nikula@intel.com>
2019-07-09kbuild: do not create wrappers for header-test-yMasahiro Yamada1-1/+1
header-test-y does not work with headers in sub-directories. For example, you may want to write a Makefile, like this: include/linux/Kbuild: header-test-y += mtd/nand.h This entry will create a wrapper include/linux/mtd/nand.hdrtest.c with the following content: #include "mtd/nand.h" To make this work, we need to add $(srctree)/include/linux to the header search path. It would be tedious to add ccflags-y. Instead, we could change the *.hdrtest.c rule to wrap: #include "nand.h" This works for in-tree build since #include "..." searches in the relative path from the header with this directive. For O=... build, we need to add $(srctree)/include/linux/mtd to the header search path, which will be even more tedious. After all, I thought it would be handier to compile headers directly without creating wrappers. I added a new build rule to compile %.h into %.h.s The target is %.h.s instead of %.h.o because it is slightly faster. Also, as for GCC, an empty assembly is smaller than an empty object. I wrote the build rule: $(CC) $(c_flags) -S -o $@ -x c /dev/null -include $< instead of: $(CC) $(c_flags) -S -o $@ -x c $< Both work fine with GCC, but the latter is bad for Clang. This comes down to the difference in the -Wunused-function policy. GCC does not warn about unused 'static inline' functions at all. Clang does not warn about the ones in included headers, but does about the ones in the source. So, we should handle headers as headers, not as source files. In fact, this has been hidden since commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions"), but we should not rely on that. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Jani Nikula <jani.nikula@intel.com>
2019-06-15kbuild: add support for ensuring headers are self-containedJani Nikula1-0/+3
Sometimes it's useful to be able to explicitly ensure certain headers remain self-contained, i.e. that they are compilable as standalone units, by including and/or forward declaring everything they depend on. Add special target header-test-y where individual Makefiles can add headers to be tested if CONFIG_HEADER_TEST is enabled. This will generate a dummy C file per header that gets built as part of extra-y. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-22dt-bindings: Pass binding directory to validation toolsRob Herring1-1/+1
In order to have $ref's to schema files within the kernel, we need to pass the base path of bindings to the schema validation tools. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-18kbuild: remove 'addtree' and 'flags' magic for header search pathsMasahiro Yamada1-18/+8
The 'addtree' and 'flags' in scripts/Kbuild.include are so compilecated and ugly. As I mentioned in [1], Kbuild should stop automatic prefixing of header search path options. I fixed up (almost) all Makefiles in the kernel. Now 'addtree' and 'flags' have been removed. Kbuild still caters to add $(srctree)/$(src) and $(objtree)/$(obj) to the header search path for O= building, but never touches extra compiler options from ccflags-y etc. [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-02kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree buildMasahiro Yamada1-1/+1
KBUILD_SRC was conventionally used for some different purposes: [1] To remember the source tree path [2] As a flag to check if sub-make is already done [3] As a flag to check if Kbuild runs out of tree For [1], we do not need to remember it because the top Makefile can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST)))) [2] has been replaced with self-commenting 'sub_make_done'. For [3], we can distinguish in-tree/out-of-tree by comparing $(srctree) and '.' This commit converts [3] to prepare for the KBUILD_SRC removal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-14kbuild: move archive command to scripts/Makefile.libMasahiro Yamada1-0/+6
scripts/Makefile.build and arch/s390/boot/Makefile use the same command (thin archiving with symbol table creation). Avoid the code duplication, and move it to scripts/Makefile.lib. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: remove unnecessary in-subshell executionMasahiro Yamada1-11/+10
The commands surrounded by ( ) are executed in a subshell, but in most cases, we do not need to spawn an extra subshell. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: add real-prereqs shorthand for $(filter-out FORCE,$^)Masahiro Yamada1-9/+9
In Kbuild, if_changed and friends must have FORCE as a prerequisite. Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common idiom to get the names of all the prerequisites except phony targets. Add real-prereqs as a shorthand. Note: We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may include auto-generated dependencies from the .*.cmd file when a single object module is changed into a multi object module. Refer to commit 69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some comment to avoid accidental breakage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org>
2019-01-28kbuild: simplify rules of data compression with size appendingMasahiro Yamada1-11/+7
All the callers of size_append pass $(filter-out FORCE,$^). Move $(filter-out FORCE,$^) to the definition of size_append. This makes the callers cleaner because $(call ...) is unneeded for a macro with no argument. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: skip 'addtree' and 'flags' magic for external module buildMasahiro Yamada1-5/+6
When building an external module, $(obj) is the absolute path to it. The header search paths from ccflags-y etc. should not be tweaked. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: change filechk to surround the given command with { }Masahiro Yamada1-2/+1
filechk_* rules often consist of multiple 'echo' lines. They must be surrounded with { } or ( ) to work correctly. Otherwise, only the string from the last 'echo' would be written into the target. Let's take care of that in the 'filechk' in scripts/Kbuild.include to clean up filechk_* rules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: remove redundant target cleaning on failureMasahiro Yamada1-14/+7
Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), the target file is automatically deleted on failure. The boilerplate code ... || { rm -f $@; false; } is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: clean up rule_dtc_dt_yamlMasahiro Yamada1-2/+2
Commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe") and commit 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks") came in via different sub-systems. This is a follow-up cleanup. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: remove UIMAGE_IN and UIMAGE_OUTMasahiro Yamada1-4/+2
The only/last user of UIMAGE_IN/OUT was removed by commit 4722a3e6b716 ("microblaze: fix multiple bugs in arch/microblaze/boot/Makefile"). The input and output should always be $< and $@. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29Merge tag 'kbuild-v4.21' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files" * tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: remove unused cmd_gentimeconst kbuild: remove $(obj)/ prefixes in ./Kbuild treewide: add intermediate .s files to targets treewide: remove explicit rules for *offsets.s firmware: refactor firmware/Makefile firmware: remove unnecessary patterns from .gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore um: remove unused filechk_gen_header in Makefile scripts: add a tool to produce a compile_commands.json file kbuild: add -Werror=implicit-int flag unconditionally kbuild: add -Werror=strict-prototypes flag unconditionally kbuild: add -fno-PIE flag unconditionally scripts: coccinelle: Correct warning message scripts: coccinelle: only suggest true/false in files that already use them kbuild: handle part-of-module correctly for *.ll and *.symtypes kbuild: refactor part-of-module kbuild: refactor quiet_modtag kbuild: remove redundant quiet_modtag for $(obj-m) kbuild: refactor Makefile.asm-generic user/Makefile: Fix typo and capitalization in comment section ...
2018-12-13Merge branch 'yaml-bindings-for-v4.21' into dt/nextRob Herring1-2/+22
2018-12-13kbuild: Add support for DT binding schema checksRob Herring1-2/+22
This adds the build infrastructure for checking DT binding schema documents and validating dts files using the binding schema. Check DT binding schema documents: make dt_binding_check Build dts files and check using DT binding schema: make dtbs_check Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to use for validation. This makes it easier to find and fix errors generated by a specific schema. Currently, the validation targets are separate from a normal build to avoid a hard dependency on the external DT schema project and because there are lots of warnings generated. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-01kbuild: remove redundant 'set -e' from filechk_offsetsMasahiro Yamada1-1/+1
The filechk macro in scripts/Kbuild.include already sets 'set -e'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-30kbuild: Enable dtc graph_port warning by defaultRob Herring1-1/+0
All the 'graph_port' warnings have been fixed or have pending fixes, so we can enable it by default now. Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-30kbuild: disable dtc simple_bus_reg warnings by defaultRob Herring1-0/+1
The updated version of dtc has a bug fix for simple_bus_reg warnings and lots of warnings are generated now. So disable this warning by default. Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring1-1/+1
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada1-1/+1
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-28kbuild: do not redirect the first prerequisite for filechkMasahiro Yamada1-1/+1
Currently, filechk unconditionally opens the first prerequisite and redirects it as the stdin of a filechk_* rule. Hence, every target using $(call filechk,...) must list something as the first prerequisite even if it is unneeded. '< $<' is actually unneeded in most cases. Each rule can explicitly adds it if necessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-19kbuild: change ld_flags to contain LDFLAGS_$(@F)Masahiro Yamada1-2/+2
Put $(LDFLAGS_$(@F)) into ld_flags so that $(LDFLAGS_pcap.o) and $(LDFLAGS_vde.o) in arch/um/drivers/Makefile are absorbed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
2018-07-19kbuild: replace $(LDFLAGS) $(ldflags-y) with $(ld_flags)Masahiro Yamada1-2/+1
$(LDFLAGS) $(ldflags-y) is equivalent to $(ld_flags). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
2018-06-07Merge tag 'devicetree-for-4.18' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new warnings which are either fixed or disabled by default (enabled with W=1). - Validate an untrusted offset in DT overlay function update_usages_of_a_phandle_reference - Fix a use after free error of_platform_device_destroy - Fix an off by 1 string errors in unittest - Avoid creating a struct device for OPP nodes - Update DT specific submitting-patches.txt with patch content and subject requirements. - Move some bindings to their proper subsystem locations - Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD, and ArcherMind - Add documentation for "no-gpio-delays" property in FSI bus GPIO master - Add compatible for r8a77990 SoC ravb ethernet block - More wack-a-mole removal of 'status' property in examples * tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits) dt-bindings: submitting-patches: add guidance on patch content and subject of: platform: stop accessing invalid dev in of_platform_device_destroy dt-bindings: net: ravb: Add support for r8a77990 SoC dt-bindings: Add vendor prefix for ArcherMind dt-bindings: fsi-master-gpio: Document "no-gpio-delays" property dt-bindings: Add vendor prefix for Logic PD of: overlay: validate offset from property fixups of: unittest: for strings, account for trailing \0 in property length field drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays kbuild: disable new dtc graph and unit-address warnings scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc MAINTAINERS: add keyword for devicetree overlay notifiers dt-bindings: define vendor prefix for Wi2Wi, Inc. dt-bindings: Add vendor prefix for Avnet, Inc. dt-bindings: Relocate Tegra20 memory controller bindings dt-bindings: Add "sifive" vendor prefix dt-bindings: exynos: move ADC binding to iio/adc/ directory dt-bindings: powerpc/4xx: move 4xx NDFC and EMAC bindings to subsystem directories dt-bindings: move various RNG bindings to rng/ directory dt-bindings: move various timer bindings to timer/ directory ...
2018-05-14kbuild: disable new dtc graph and unit-address warningsRob Herring1-0/+3
dtc gained some new warnings for OF graphs and unique unit addresses, but they are currently much too noisy. So turn off 'graph_child_address', 'graph_port', and 'unique_unit_address' warnings by default. They can be enabled by building dtbs with W=1. Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-05-05kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)Masahiro Yamada1-1/+1
Commit 73a4f6dbe70a ("kbuild: add LEX and YACC variables") missed to update cmd_bison_h somehow. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markersMasahiro Yamada1-3/+0
GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-04-07kbuild: add %.dtb.S and %.dtb to 'targets' automaticallyMasahiro Yamada1-2/+2
Another common pattern that consists of chained commands is to compile a DTB as binary data into the kernel image or a module. It is used in several places in the source tree. Support it in the core Makefile. $(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb) in case cmd_dt_S_dtb is changed in the future. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-07genksyms: generate lexer and parser during build instead of shippingMasahiro Yamada1-21/+3
Now that the kernel build supports flex and bison, remove the _shipped files and generate them during the build instead. There are no more shipped lexer and parser, so I ripped off the rules in scripts/Malefile.lib that were used for REGENERATE_PARSERS. The genksyms parser has ambiguous grammar, which would emit warnings: scripts/genksyms/parse.y: warning: 9 shift/reduce conflicts [-Wconflicts-sr] scripts/genksyms/parse.y: warning: 5 reduce/reduce conflicts [-Wconflicts-rr] They are normally suppressed, but displayed when W=1 is given. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-05Merge tag 'devicetree-for-4.17' of ↵Linus Torvalds1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a bunch more warnings (hidden behind W=1). - Build dtc lexer and parser files instead of using shipped versions. - Rework overlay apply API to take an FDT as input and apply overlays in a single step. - Add a phandle lookup cache. This improves boot time by hundreds of msec on systems with large DT. - Add trivial mcp4017/18/19 potentiometers bindings. - Remove VLA stack usage in DT code. * tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (26 commits) of: unittest: fix an error code in of_unittest_apply_overlay() of: unittest: move misplaced function declaration of: unittest: Remove VLA stack usage of: overlay: Fix forgotten reference to of_overlay_apply() of: Documentation: Fix forgotten reference to of_overlay_apply() of: unittest: local return value variable related cleanups of: unittest: remove unneeded local return value variables dt-bindings: trivial: add various mcp4017/18/19 potentiometers of: unittest: fix an error test in of_unittest_overlay_8() of: cache phandle nodes to reduce cost of of_find_node_by_phandle() dt-bindings: rockchip-dw-mshc: use consistent clock names MAINTAINERS: Add linux/of_*.h headers to appropriate subsystems scripts: turn off some new dtc warnings by default scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987 scripts/dtc: generate lexer and parser during build instead of shipping powerpc: boot: add strrchr function of: overlay: do not include path in full_name of added nodes of: unittest: clean up changeset test arm64/efi: Make strrchr() available to the EFI namespace ARM: boot: add strrchr function ...
2018-03-31kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>Masahiro Yamada1-0/+1
Since commit 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes"), <linux/kconfig.h> pulls in kernel-space headers to unrelated places. Commit 0f9da844d877 ("MIPS: boot: Define __ASSEMBLY__ for its.S build") suppress the build error by defining __ASSEMBLY__, but ITS (i.e. DTS) is not assembly, and should not include <linux/compiler_types.h> in the first place. Looking at arch/s390/tools/Makefile, host programs gen_facilities and gen_opcode_table now pull in <linux/compiler_types.h> as well. The motivation for that commit was to define necessary attributes before any struct is defined. Obviously, this happens only in C. It is enough to include <linux/compiler_types.h> only when compiling C files, and only when compiling kernel space. Move the include to c_flags. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.aMasahiro Yamada1-4/+3
In Kbuild, Makefiles can add the same object to obj-y multiple times. So, obj-y += foo.o obj-y += foo.o is fine. However, this is not true when the same object is added multiple times via composite objects. For example, obj-y += foo.o bar.o foo-objs := foo-bar-common.o foo-only.o bar-objs := foo-bar-common.o bar-only.o causes build error because two instances of foo-bar-common.o are linked into the vmlinux. Makefiles tend to invent ugly work-around, for example - lib/zstd/Makefile - drivers/net/ethernet/cavium/liquidio/Makefile The technique used in Kbuild to avoid the multiple definition error is to use $(filter $(obj-y), $^). Here, $^ lists the names of all the prerequisites with duplicated names removed. By replacing it with $(filter $(real-obj-y), $^) we can do likewise for composite objects. For built-in objects, we do not need to keep the composite object structure. We can simply expand them, and link $(real-obj-y) to built-in.a. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kbuild: rename real-objs-y/m to real-obj-y/mMasahiro Yamada1-4/+4
When I was refactoring Makefiles, I stupidly mistook 'real-obj-y' for 'real-objs-y' over and over again. Finally, I decide to rename it to 'real-obj-y'. This is consistent with 'obj-y', 'subdir-obj-y'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kbuild: move modname and modname-multi close to modname_flagsMasahiro Yamada1-6/+8
Just a cosmetic change to put related code close together. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
2018-03-26kbuild: simplify modname calculationMasahiro Yamada1-7/+0
modname can be calculated much more simply. If modname-multi is empty, it is a single-used object. So, modname = $(basetarget). Otherwise, modname = $(modname-multi). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
2018-03-26kbuild: fix modname for composite modulesCao jin1-2/+2
Commit cf4f21938e13 ("kbuild: Allow to specify composite modules with modname-m") added modname-m support, but missed to update the corresponding multi-objs-m & modname-multi definition. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kbuild: define KBUILD_MODNAME even if multiple modules share objectsMasahiro Yamada1-7/+5
Currently, KBUILD_MODNAME is defined only when $(modname) contains just one word. If an object is shared among multiple modules, undefined KBUILD_MODNAME could cause a build error. For example, if CONFIG_DYNAMIC_DEBUG is enabled, any call of printk() populates .modname, then fails to build due to undefined KBUILD_MODNAME. Take the following code as an example: obj-m += foo.o obj-m += bar.o foo-objs := foo-bar-common.o foo-only.o bar-objs := foo-bar-common.o bar-only.o In this case, there is room for argument what to define for KBUILD_MODNAME when foo-bar-common.o is being compiled. "foo", "bar", or what else? One idea is to define colon-separated modules that share the object, in this case, "bar:foo" (modules are sorted alphabetically by $(sort ...)). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
2018-03-26kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multiMasahiro Yamada1-1/+1
In the context ... $(obj)/%.s: $(src)/%.c FORCE $(call if_changed_dep,cc_s_c) $(obj)/%.i: $(src)/%.c FORCE $(call if_changed_dep,cpp_i_c) $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE $(call cmd,force_checksrc) $(call if_changed_rule,cc_o_c) $(obj)/%.lst: $(src)/%.c FORCE $(call if_changed_dep,cc_lst_c) '$*' returns the stem of the target (the part of '%'), so $(obj)/ has already been ripped off. $(subst $(obj)/,,$*.o) is the same as $*.o Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
2018-03-26kbuild: Use ls(1) instead of stat(1) to obtain file sizeMichael Forney1-1/+1
stat(1) is not standardized and different implementations have their own (conflicting) flags for querying the size of a file. ls(1) provides the same information (value of st.st_size) in the 5th column, except when the file is a character or block device. This output is standardized[0]. The -n option turns on -l, which writes lines formatted like "%s %u %s %s %u %s %s\n", <file mode>, <number of links>, <owner name>, <group name>, <size>, <date and time>, <pathname> but instead of writing the <owner name> and <group name>, it writes the numeric owner and group IDs (this avoids /etc/passwd and /etc/group lookups as well as potential field splitting issues). The <size> field is specified as "the value that would be returned for the file in the st_size field of struct stat". To avoid duplicating logic in several locations in the tree, create scripts/file-size.sh and update callers to use that instead of stat(1). [0] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ls.html#tag_20_73_10 Signed-off-by: Michael Forney <forney@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kbuild: rename built-in.o to built-in.aNicholas Piggin1-3/+3
Incremental linking is gone, so rename built-in.o to built-in.a, which is the usual extension for archive files. This patch does two things, first is a simple search/replace: git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g' The second is to invert nesting of nested text manipulations to avoid filtering built-in.a out from libs-y2: -libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y))) +libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y))) Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-09kbuild: Handle builtin dtb file names containing hyphensJames Hogan1-4/+4
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree FDT (that is, the .dtb file) as binary data in the kernel image. This assembly source contains labels before and after the binary data. The label names incorporate the file name of the corresponding .dtb file. Hyphens are not legal characters in labels, so .dtb files built into the kernel with hyphens in the file name result in errors like the following: bcm3368-netgear-cvg834g.dtb.S: Assembler messages: bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-' bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:' bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:' bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file name to underscores when constructing the labels. As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC contain hyphens in their names, but the issue only currently manifests on Broadcom MIPS platforms, as that is the only place where such files are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is used (in the latter case it admittedly shouldn't really build all the dtb.o files, but thats a separate issue). Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05scripts: turn off some new dtc warnings by defaultRob Herring1-0/+2
The latest dtc update adds some new noisy warnings, so turn them off by default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They can be re-enabled by building with 'W=1'. Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-01scripts: re-enable some now fixed dtc warningsRob Herring1-3/+0
We can re-enable some dtc warnings that have been completely or mostly fixed. There are a few remaining ones in arm64 dts files which crept in recently. Signed-off-by: Rob Herring <robh@kernel.org>