summaryrefslogtreecommitdiffstats
path: root/scripts/Kbuild.include
AgeCommit message (Collapse)AuthorFilesLines
2019-03-04kbuild: remove cc-version macroMasahiro Yamada1-4/+1
There is no more direct user of this macro; it is only used by cc-ifversion. Calling this macro is not efficient since it invokes the compiler to get the compiler version. CONFIG_GCC_VERSION is already calculated in the Kconfig stage, so Makefile can reuse it. Here is a note about the slight difference between cc-version and CONFIG_GCC_VERSION: When using Clang, cc-version is evaluated to '0402' because Clang defines __GNUC__ and __GNUC__MINOR__, and looks like GCC 4.2 in the version point of view. On the other hand, CONFIG_GCC_VERSION=0 when $(CC) is clang. There are currently two users of cc-ifversion: arch/mips/loongson64/Platform arch/powerpc/Makefile They are not affected by this change. The format of cc-version is <major><minor>, while CONFIG_GCC_VERSION <major><minor><patch>. I adjusted cc-ifversion for the difference of the number of digits. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: refactor cc-cross-prefix implementationMasahiro Yamada1-8/+4
- $(word 1, <text>) is equivalent to $(firstword <text>) - hardcode "gcc" instead of $(CC) - minimize the shell script part A little more notes in case $(filter-out -%, ...) is not clear. arch/mips/Makefile passes prefixes depending on the configuration. CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- \ $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-) In the Kconfig stage (e.g. when you run 'make defconfig'), neither CONFIG_32BIT nor CONFIG_64BIT is defined. So, $(tool-archpref) is empty. As a result, "-linux -linux-gnu- -unknown-linux-gnu" is passed into cc-cross-prefix. The command 'which' assumes arguments starting with a hyphen as command options, then emits the following messages: Illegal option -l Illegal option -l Illegal option -u I think it is strange to define CROSS_COMPILE depending on the CONFIG options since you need to feed $(CC) to Kconfig, but it is how MIPS Makefile currently works. Anyway, it would not hurt to filter-out invalid strings beforehand. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: add real-prereqs shorthand for $(filter-out FORCE,$^)Masahiro Yamada1-0/+4
In Kbuild, if_changed and friends must have FORCE as a prerequisite. Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common idiom to get the names of all the prerequisites except phony targets. Add real-prereqs as a shorthand. Note: We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may include auto-generated dependencies from the .*.cmd file when a single object module is changed into a multi object module. Refer to commit 69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some comment to avoid accidental breakage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org>
2019-01-14kbuild: remove unused baseprereqMasahiro Yamada1-4/+0
Commit eea199b445f6 ("kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX") removed the last users of this macro. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: use assignment instead of define ... endef for filechk_* rulesMasahiro Yamada1-4/+4
You do not have to use define ... endef for filechk_* rules. For simple cases, the use of assignment looks cleaner, IMHO. I updated the usage for scripts/Kbuild.include in case somebody misunderstands the 'define ... endif' is the requirement. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-06kbuild: change filechk to surround the given command with { }Masahiro Yamada1-1/+1
filechk_* rules often consist of multiple 'echo' lines. They must be surrounded with { } or ( ) to work correctly. Otherwise, only the string from the last 'echo' would be written into the target. Let's take care of that in the 'filechk' in scripts/Kbuild.include to clean up filechk_* rules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29Merge tag 'kbuild-v4.21' of ↵Linus Torvalds1-42/+10
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files" * tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: remove unused cmd_gentimeconst kbuild: remove $(obj)/ prefixes in ./Kbuild treewide: add intermediate .s files to targets treewide: remove explicit rules for *offsets.s firmware: refactor firmware/Makefile firmware: remove unnecessary patterns from .gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore um: remove unused filechk_gen_header in Makefile scripts: add a tool to produce a compile_commands.json file kbuild: add -Werror=implicit-int flag unconditionally kbuild: add -Werror=strict-prototypes flag unconditionally kbuild: add -fno-PIE flag unconditionally scripts: coccinelle: Correct warning message scripts: coccinelle: only suggest true/false in files that already use them kbuild: handle part-of-module correctly for *.ll and *.symtypes kbuild: refactor part-of-module kbuild: refactor quiet_modtag kbuild: remove redundant quiet_modtag for $(obj-m) kbuild: refactor Makefile.asm-generic user/Makefile: Fix typo and capitalization in comment section ...
2018-12-19Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to ↵Ingo Molnar1-3/+1
work around asm() related GCC inlining bugs" This reverts commit 77b0bf55bc675233d22cd5df97605d516d64525e. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Conflicts: arch/x86/Makefile Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-02kbuild: move .SECONDARY special target to Kbuild.includeMasahiro Yamada1-0/+3
In commit 54a702f70589 ("kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers"), I missed one important feature of the .SECONDARY target: .SECONDARY with no prerequisites causes all targets to be treated as secondary. ... which agrees with the policy of Kbuild. Let's move it to scripts/Kbuild.include, with no prerequisites. Note: If an intermediate file is generated by $(call if_changed,...), you still need to add it to "targets" so its .*.cmd file is included. The arm/arm64 crypto files are generated by $(call cmd,shipped), so they do not need to be added to "targets", but need to be added to "clean-files" so "make clean" can properly clean them away. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: refactor if_changedMasahiro Yamada1-2/+1
'@set -e; $(echo-cmd) $(cmd_$(1)' can be replaced with '$(cmd)'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: remove trailing semicolon from cmd_* passed to if_changed_ruleMasahiro Yamada1-1/+1
With the change of rule_cc_o_c / rule_as_o_S in the last commit, each command is executed in a separate subshell. Rip off unneeded semicolons. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: change if_changed_rule for multi-line recipeMasahiro Yamada1-8/+4
The 'define' ... 'endef' directive is useful to confine a series of shell commands into a single macro: define foo [action1] [action2] [action3] endif Each action is executed in a separate subshell. However, rule_cc_o_c and rule_as_o_S in scripts/Makefile.build are written as follows (with a trailing semicolon in each cmd_*): define rule_cc_o_c [action1] ; \ [action2] ; \ [action3] ; endef All shell commands are concatenated with '; \' so that it looks like a single command from the Makefile point of view. This does not exploit the benefits of 'define' ... 'endef' form because a single shell command can be more simply written, like this: rule_cc_o_c = \ [action1] ; \ [action2] ; \ [action3] ; I guess the intention for the command concatenation was to let the '@set -e' in if_changed_rule cover all the commands. We can improve the readability by moving '@set -e' to the 'cmd' macro. The combo of $(call echo-cmd,*) $(cmd_*) in rule_cc_o_c and rule_as_o_S have been replaced with $(call cmd,*). The trailing back-slashes have been removed. Here is a note about the performance: the commands in rule_cc_o_c and rule_as_o_S were previously executed all together in a single subshell, but now each line in a separate subshell. This means Make will spawn extra subshells [1]. I measured the build performance for x86_64_defconfig + CONFIG_MODVERSIONS + CONFIG_TRIM_UNUSED_KSYMS and I saw slight performance regression, but I believe code readability and maintainability wins. [1] Precisely, GNU Make may optimize this by executing the command directly instead of forking a subshell, if no shell special characters are found in the command line and omitting the subshell will not change the behavior. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMSMasahiro Yamada1-28/+0
My main motivation of this commit is to clean up scripts/Kbuild.include and scripts/Makefile.build. Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick; possibly exported symbols are detected by letting $(CPP) replace EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is post-processed by sed, and passed to fixdep. The extra preprocessing is costly, and hacking cmd_and_fixdep is ugly. I came up with a new way to find exported symbols; insert a dummy symbol __ksym_marker_* to each potentially exported symbol. Those dummy symbols are picked up by $(NM), post-processed by sed, then appended to .*.cmd files. I collected the post-process part to a new shell script scripts/gen_ksymdeps.sh for readability. The dummy symbols are put into the .discard.* section so that the linker script rips them off the final vmlinux or modules. A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will be much faster. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nicolas Pitre <nico@linaro.org>
2018-12-01kbuild: let fixdep directly write to .*.cmd filesMasahiro Yamada1-6/+4
Currently, fixdep writes dependencies to .*.tmp, which is renamed to .*.cmd after everything succeeds. This is a very safe way to avoid corrupted .*.cmd files. The if_changed_dep has carried this safety mechanism since it was added in 2002. If fixdep fails for some reasons or a user terminates the build while fixdep is running, the incomplete output from the fixdep could be troublesome. This is my insight about some bad scenarios: [1] If the compiler succeeds to generate *.o file, but fixdep fails to write necessary dependencies to .*.cmd file, Make will miss to rebuild the object when headers or CONFIG options are changed. In this case, fixdep should not generate .*.cmd file at all so that 'arg-check' will surely trigger the rebuild of the object. [2] A partially constructed .*.cmd file may not be a syntactically correct makefile. The next time Make runs, it would include it, then fail to parse it. Once this happens, 'make clean' is be the only way to fix it. In fact, [1] is no longer a problem since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"). Make deletes a target file on any failure in its recipe. Because fixdep is a part of the recipe of *.o target, if it fails, the *.o is deleted anyway. However, I am a bit worried about the slight possibility of [2]. So, here is a solution. Let fixdep directly write to a .*.cmd file, but allow makefiles to include it only when its corresponding target exists. This effectively reverts commit 2982c953570b ("kbuild: remove redundant $(wildcard ...) for cmd_files calculation"), and commit 00d78ab2ba75 ("kbuild: remove dead code in cmd_files calculation in top Makefile") because now we must check the presence of targets. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02kbuild: remove cc-name variableMasahiro Yamada1-4/+0
There is one more user of $(cc-name) in the top Makefile. It is supposed to detect Clang before invoking Kconfig, so it should still be there in the $(shell ...) form. All the other users of $(cc-name) have been replaced with $(CONFIG_CC_IS_CLANG). Hence, scripts/Kbuild.include does not need to define cc-name any more. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02kbuild: remove unused cc-fullversion variableMasahiro Yamada1-4/+0
The last user of cc-fullversion was removed by commit f2910f0e6835 ("powerpc: remove old GCC version checks"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-28Merge tag 'kbuild-v4.20' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - optimize kallsyms slightly - remove check for old CFLAGS usage - add some compiler flags unconditionally instead of evaluating $(call cc-option,...) - fix variable shadowing in host tools - refactor scripts/mkmakefile - refactor various makefiles * tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: Create macro to avoid variable shadowing ASN.1: Remove unnecessary shadowed local variable kbuild: use 'else ifeq' for checksrc to improve readability kbuild: remove unneeded link_multi_deps kbuild: add -Wno-unused-but-set-variable flag unconditionally kbuild: add -Wdeclaration-after-statement flag unconditionally kbuild: add -Wno-pointer-sign flag unconditionally modpost: remove leftover symbol prefix handling for module device table kbuild: simplify command line creation in scripts/mkmakefile kbuild: do not pass $(objtree) to scripts/mkmakefile kbuild: remove user ID check in scripts/mkmakefile kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile kbuild: add --include-dir flag only for out-of-tree build kbuild: remove dead code in cmd_files calculation in top Makefile kbuild: hide most of targets when running config or mixed targets kbuild: remove old check for CFLAGS use kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionally kallsyms: remove left-over Blackfin code kallsyms: reduce size a little on 64-bit
2018-10-04kbuild/Makefile: Prepare for using macros in inline assembly code to work ↵Nadav Amit1-1/+3
around asm() related GCC inlining bugs Using macros in inline assembly allows us to work around bugs in GCC's inlining decisions. Compile macros.S and use it to assemble all C files. Currently only x86 will use it. Background: The inlining pass of GCC doesn't include an assembler, so it's not aware of basic properties of the generated code, such as its size in bytes, or that there are such things as discontiuous blocks of code and data due to the newfangled linker feature called 'sections' ... Instead GCC uses a lazy and fragile heuristic: it does a linear count of certain syntactic and whitespace elements in inlined assembly block source code, such as a count of new-lines and semicolons (!), as a poor substitute for "code size and complexity". Unsurprisingly this heuristic falls over and breaks its neck whith certain common types of kernel code that use inline assembly, such as the frequent practice of putting useful information into alternative sections. As a result of this fresh, 20+ years old GCC bug, GCC's inlining decisions are effectively disabled for inlined functions that make use of such asm() blocks, because GCC thinks those sections of code are "large" - when in reality they are often result in just a very low number of machine instructions. This absolute lack of inlining provess when GCC comes across such asm() blocks both increases generated kernel code size and causes performance overhead, which is particularly noticeable on paravirt kernels, which make frequent use of these inlining facilities in attempt to stay out of the way when running on baremetal hardware. Instead of fixing the compiler we use a workaround: we set an assembly macro and call it from the inlined assembly block. As a result GCC considers the inline assembly block as a single instruction. (Which it often isn't but I digress.) This uglifies and bloats the source code - for example just the refcount related changes have this impact: Makefile | 9 +++++++-- arch/x86/Makefile | 7 +++++++ arch/x86/kernel/macros.S | 7 +++++++ scripts/Kbuild.include | 4 +++- scripts/mod/Makefile | 2 ++ 5 files changed, 26 insertions(+), 3 deletions(-) Yay readability and maintainability, it's not like assembly code is hard to read and maintain ... We also hope that GCC will eventually get fixed, but we are not holding our breath for that. Yet we are optimistic, it might still happen, any decade now. [ mingo: Wrote new changelog describing the background. ] Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/20181003213100.189959-3-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-13kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionallyMasahiro Yamada1-1/+1
$(srctree) always points to the top of the source tree whether KBUILD_SRC is set or not. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-30x86/build: Remove jump label quirk for GCC older than 4.5.2Masahiro Yamada1-4/+0
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") bumped the minimum GCC version to 4.6 for all architectures. Remove the workaround code. It was the only user of cc-if-fullversion. Remove the macro as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/1535348714-25457-1-git-send-email-yamada.masahiro@socionext.com
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada1-2/+2
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-15Merge tag 'kconfig-v4.19' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - show clearer error messages where pkg-config is needed, but not installed - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics - create all necessary directories by Kconfig tool itself instead of Makefile - update the .config unconditionally when syncconfig is invoked - use 'include' directive instead of '-include' where include/config/{auto,tristate}.conf is mandatory - do not try to update the .config when running install targets - add .DELETE_ON_ERROR to delete partially updated files - misc cleanups and fixes * tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove P_ENV property type kconfig: remove unused sym_get_env_prop() function kconfig: fix the rule of mainmenu_stmt symbol init/Kconfig: Use short unix-style option instead of --longname Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory kbuild: remove auto.conf from prerequisite of phony targets kbuild: do not update config for 'make kernelrelease' kbuild: do not update config when running install targets kbuild: add .DELETE_ON_ERROR special target kbuild: use 'include' directive to load auto.conf from top Makefile kconfig: allow all config targets to write auto.conf if missing kconfig: make syncconfig update .config regardless of sym_change_count kconfig: create directories needed for syncconfig by itself kconfig: remove unneeded directory generation from local*config kconfig: split out useful helpers in confdata.c kconfig: rename file_write_dep and move it to confdata.c kconfig: fix typos in description of "choice" in kconfig-language.txt kconfig: handle format string before calling conf_message_callback() kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE kconfig: check for pkg-config on make {menu,n,g,x}config
2018-08-15Merge tag 'kbuild-v4.19' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - verify depmod is installed before modules_install - support build salt in case build ids must be unique between builds - allow users to specify additional host compiler flags via HOST*FLAGS, and rename internal variables to KBUILD_HOST*FLAGS - update buildtar script to drop vax support, add arm64 support - update builddeb script for better debarch support - document the pit-fall of if_changed usage - fix parallel build of UML with O= option - make 'samples' target depend on headers_install to fix build errors - remove deprecated host-progs variable - add a new coccinelle script for refcount_t vs atomic_t check - improve double-test coccinelle script - misc cleanups and fixes * tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) coccicheck: return proper error code on fail Coccinelle: doubletest: reduce side effect false positives kbuild: remove deprecated host-progs variable kbuild: make samples really depend on headers_install um: clean up archheaders recipe kbuild: add %asm-generic to no-dot-config-targets um: fix parallel building with O= option scripts: Add Python 3 support to tracing/draw_functrace.py builddeb: Add automatic support for sh{3,4}{,eb} architectures builddeb: Add automatic support for riscv* architectures builddeb: Add automatic support for m68k architecture builddeb: Add automatic support for or1k architecture builddeb: Add automatic support for sparc64 architecture builddeb: Add automatic support for mips{,64}r6{,el} architectures builddeb: Add automatic support for mips64el architecture builddeb: Add automatic support for ppc64 and powerpcspe architectures builddeb: Introduce functions to simplify kconfig tests in set_debarch builddeb: Drop check for 32-bit s390 builddeb: Change architecture detection fallback to use dpkg-architecture builddeb: Skip architecture detection when KBUILD_DEBARCH is set ...
2018-08-14Merge tag 'arm64-upstream' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "A bunch of good stuff in here. Worth noting is that we've pulled in the x86/mm branch from -tip so that we can make use of the core ioremap changes which allow us to put down huge mappings in the vmalloc area without screwing up the TLB. Much of the positive diffstat is because of the rseq selftest for arm64. Summary: - Wire up support for qspinlock, replacing our trusty ticket lock code - Add an IPI to flush_icache_range() to ensure that stale instructions fetched into the pipeline are discarded along with the I-cache lines - Support for the GCC "stackleak" plugin - Support for restartable sequences, plus an arm64 port for the selftest - Kexec/kdump support on systems booting with ACPI - Rewrite of our syscall entry code in C, which allows us to zero the GPRs on entry from userspace - Support for chained PMU counters, allowing 64-bit event counters to be constructed on current CPUs - Ensure scheduler topology information is kept up-to-date with CPU hotplug events - Re-enable support for huge vmalloc/IO mappings now that the core code has the correct hooks to use break-before-make sequences - Miscellaneous, non-critical fixes and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits) arm64: alternative: Use true and false for boolean values arm64: kexec: Add comment to explain use of __flush_icache_range() arm64: sdei: Mark sdei stack helper functions as static arm64, kaslr: export offset in VMCOREINFO ELF notes arm64: perf: Add cap_user_time aarch64 efi/libstub: Only disable stackleak plugin for arm64 arm64: drop unused kernel_neon_begin_partial() macro arm64: kexec: machine_kexec should call __flush_icache_range arm64: svc: Ensure hardirq tracing is updated before return arm64: mm: Export __sync_icache_dcache() for xen-privcmd drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory arm64: Add support for STACKLEAK gcc plugin arm64: Add stack information to on_accessible_stack drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported arm64: fix ACPI dependencies rseq/selftests: Add support for arm64 arm64: acpi: fix alignment fault in accessing ACPI efi/arm: map UEFI memory map even w/o runtime services enabled efi/arm: preserve early mapping of UEFI memory map longer for BGRT drivers: acpi: add dependency of EFI for arm64 ...
2018-07-28kbuild: do not redirect the first prerequisite for filechkMasahiro Yamada1-1/+1
Currently, filechk unconditionally opens the first prerequisite and redirects it as the stdin of a filechk_* rule. Hence, every target using $(call filechk,...) must list something as the first prerequisite even if it is unneeded. '< $<' is actually unneeded in most cases. Each rule can explicitly adds it if necessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25kbuild: add .DELETE_ON_ERROR special targetMasahiro Yamada1-0/+3
If Make gets a fatal signal while a shell is executing, it may delete the target file that the recipe was supposed to update. This is needed to make sure that it is remade from scratch when Make is next run; if Make is interrupted after the recipe has begun to write the target file, it results in an incomplete file whose time stamp is newer than that of the prerequisites files. Make automatically deletes the incomplete file on interrupt unless the target is marked .PRECIOUS. The situation is just the same as when the shell fails for some reasons. Usually when a recipe line fails, if it has changed the target file at all, the file is corrupted, or at least it is not completely updated. Yet the file’s time stamp says that it is now up to date, so the next time Make runs, it will not try to update that file. However, Make does not cater to delete the incomplete target file in this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile to request it. scripts/Kbuild.include seems a suitable place to add it because it is included from almost all sub-makes. Please note .DELETE_ON_ERROR is not effective for phony targets. The external module building should never ever touch the kernel tree. The following recipe fails if include/generated/autoconf.h is missing. However, include/config/auto.conf is not deleted since it is a phony target. PHONY += include/config/auto.conf include/config/auto.conf: $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or $@ are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-23arm64: build with baremetal linker target instead of Linux when availableOlof Johansson1-2/+2
Not all toolchains have the baremetal elf targets, RedHat/Fedora ones in particular. So, probe for whether it's available and use the previous (linux) targets if it isn't. Reported-by: Laura Abbott <labbott@redhat.com> Tested-by: Laura Abbott <labbott@redhat.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-18kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGSLaura Abbott1-1/+1
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to KBUILD_HOSTCFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-06kbuild: do not drop -I without parameterMasahiro Yamada1-1/+1
The comment line for addtree says "skip if -I has no parameter". What it actually does is "drop if -I has no parameter". For example, if you have the compiler flag '-I foo' (a space between), it will be converted to 'foo'. This completely changes the meaning. What we want is, "do nothing" for -I without parameter so that '-I foo' is kept as-is. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29kbuild: remove kbuild cacheMasahiro Yamada1-87/+14
The kbuild cache was introduced to remember the result of shell commands, some of which are expensive to compute, such as $(call cc-option,...). However, this turned out not so clever as I had first expected. Actually, it is problematic. For example, "$(CC) -print-file-name" is cached. If the compiler is updated, the stale search path causes build error, which is difficult to figure out. Another problem scenario is cache files could be touched while install targets are running under the root permission. We can patch them if desired, but the build infrastructure is getting uglier and uglier. Now, we are going to move compiler flag tests to the configuration phase. If this is completed, the result of compiler tests will be naturally cached in the .config file. We will not have performance issues of incremental building since this testing only happens at Kconfig time. To start this work with a cleaner code base, remove the kbuild cache first. Revert the following commits: Commit 9a234a2e3843 ("kbuild: create directory for make cache only when necessary") Commit e17c400ae194 ("kbuild: shrink .cache.mk when it exceeds 1000 lines") Commit 4e56207130ed ("kbuild: Cache a few more calls to the compiler") Commit 3298b690b21c ("kbuild: Add a cache for generated variables") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-28kbuild: do not display CHK for filechkMasahiro Yamada1-1/+0
filechk displays two short logs; CHK for creating a temporary file, and UPD for really updating the target. IMHO, the build system can be quiet when the target file has not been updated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-04-11Kbuild: fix # escaping in .cmd files for future MakeRasmus Villemoes1-2/+3
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kbuild: move include/config/ksym/* to include/ksym/*Masahiro Yamada1-1/+1
The idea of using fixdep was inspired by Kconfig, but autoksyms belongs to a different group. So, I want to move those touched files under include/config/ksym/ to include/ksym/. The directory include/ksym/ can be removed by 'make clean' because it is meaningless for the external module building. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-26kbuild: simplify ld-option implementationMasahiro Yamada1-3/+1
Currently, linker options are tested by the coordination of $(CC) and $(LD) because $(LD) needs some object to link. As commit 86a9df597cdd ("kbuild: fix linker feature test macros when cross compiling with Clang") addressed, we need to make sure $(CC) and $(LD) agree the underlying architecture of the passed object. This could be a bit complex when we combine tools from different groups. For example, we can use clang for $(CC), but we still need to rely on GCC toolchain for $(LD). So, I was searching for a way of standalone testing of linker options. A trick I found is to use '-v'; this not only prints the version string, but also tests if the given option is recognized. If a given option is supported, $ aarch64-linux-gnu-ld -v --fix-cortex-a53-843419 GNU ld (Linaro_Binutils-2017.11) 2.28.2.20170706 $ echo $? 0 If unsupported, $ aarch64-linux-gnu-ld -v --fix-cortex-a53-843419 GNU ld (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) 2.23.1 aarch64-linux-gnu-ld: unrecognized option '--fix-cortex-a53-843419' aarch64-linux-gnu-ld: use the --help option for usage information $ echo $? 1 Gold works likewise. $ aarch64-linux-gnu-ld.gold -v --fix-cortex-a53-843419 GNU gold (Linaro_Binutils-2017.11 2.28.2.20170706) 1.14 masahiro@pug:~/ref/linux$ echo $? 0 $ aarch64-linux-gnu-ld.gold -v --fix-cortex-a53-999999 GNU gold (Linaro_Binutils-2017.11 2.28.2.20170706) 1.14 aarch64-linux-gnu-ld.gold: --fix-cortex-a53-999999: unknown option aarch64-linux-gnu-ld.gold: use the --help option for usage information $ echo $? 1 LLD too. $ ld.lld -v --gc-sections LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers) $ echo $? 0 $ ld.lld -v --fix-cortex-a53-843419 LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers) $ echo $? 0 $ ld.lld -v --fix-cortex-a53-999999 ld.lld: error: unknown argument: --fix-cortex-a53-999999 LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers) $ echo $? 1 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2018-03-26kbuild: Improve portability of some sed invocationsMichael Forney1-1/+1
* Use BREs where EREs aren't necessary. * Pass -E instead of -r to use EREs. This will be standardized in the next POSIX revision[0]. GNU sed supports this since 4.2 (May 2009), and busybox since 1.22.0 (Jan 2014). * Use the [:space:] character class instead of ` \t` in bracket expressions. In bracket expressions, POSIX says that <backslash> loses its special meaning, so a conforming implementation cannot expand \t to <tab>[1]. * In BREs, use interval expressions (\{n,m\}) instead of non-standard features like \+ and \?. * Use a loop instead of -s flag. There are still plenty of other cases of non-standard sed invocations (use of ERE features in BREs, in-place editing), but this fixes some core ones. [0] http://austingroupbugs.net/view.php?id=528 [1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_03_05 Signed-off-by: Michael Forney <forney@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-16kbuild: create directory for make cache only when necessaryMasahiro Yamada1-4/+9
Currently, the existence of $(dir $(make-cache)) is always checked, and created if it is missing. We can avoid unnecessary system calls by some tricks. [1] If KBUILD_SRC is unset, we are building in the source tree. The output directory checks can be entirely skipped. [2] If at least one cache data is found, it means the cache file was included. Obviously its directory exists. Skip "mkdir -p". [3] If Makefile does not contain any call of __run-and-store, it will not create a cache file. No need to create its directory. [4] The "mkdir -p" should be only invoked by the first call of __run-and-store Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-11-13kbuild: fix linker feature test macros when cross compiling with ClangNick Desaulniers1-2/+3
I was not seeing my linker flags getting added when using ld-option when cross compiling with Clang. Upon investigation, this seems to be due to a difference in how GCC vs Clang handle cross compilation. GCC is configured at build time to support one backend, that is implicit when compiling. Clang is explicit via the use of `-target <triple>` and ships with all supported backends by default. GNU Make feature test macros that compile then link will always fail when cross compiling with Clang unless Clang's triple is passed along to the compiler. For example: $ clang -x c /dev/null -c -o temp.o $ aarch64-linux-android/bin/ld -E temp.o aarch64-linux-android/bin/ld: unknown architecture of input file `temp.o' is incompatible with aarch64 output aarch64-linux-android/bin/ld: warning: cannot find entry symbol _start; defaulting to 0000000000400078 $ echo $? 1 $ clang -target aarch64-linux-android- -x c /dev/null -c -o temp.o $ aarch64-linux-android/bin/ld -E temp.o aarch64-linux-android/bin/ld: warning: cannot find entry symbol _start; defaulting to 00000000004002e4 $ echo $? 0 This causes conditional checks that invoke $(CC) without the target triple, then $(LD) on the result, to always fail. Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-13kbuild: shrink .cache.mk when it exceeds 1000 linesMasahiro Yamada1-0/+6
The cache files are only cleaned away by "make clean". If you continue incremental builds, the cache files will grow up little by little. It is not a big deal in general use cases because compiler flags do not change quite often. However, if you do build-test for various architectures, compilers, and kernel configurations, you will end up with huge cache files soon. When the cache file exceeds 1000 lines, shrink it down to 500 by "tail". The Least Recently Added lines are cut. (not Least Recently Used) I hope it will work well enough. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-11-13kbuild: Add a cache for generated variablesDouglas Anderson1-14/+76
While timing a "no-op" build of the kernel (incrementally building the kernel even though nothing changed) in the Chrome OS build system I found that it was much slower than I expected. Digging into things a bit, I found that quite a bit of the time was spent invoking the C compiler even though we weren't actually building anything. Currently in the Chrome OS build system the C compiler is called through a number of wrappers (one of which is written in python!) and can take upwards of 100 ms to invoke even if we're not doing anything difficult, so these invocations of the compiler were taking a lot of time. Worse the invocations couldn't seem to take advantage of the multiple cores on my system. Certainly it seems like we could make the compiler invocations in the Chrome OS build system faster, but only to a point. Inherently invoking a program as big as a C compiler is a fairly heavy operation. Thus even if we can speed the compiler calls it made sense to track down what was happening. It turned out that all the compiler invocations were coming from usages like this in the kernel's Makefile: KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) Due to the way cc-option and similar statements work the above contains an implicit call to the C compiler. ...and due to the fact that we're storing the result in KBUILD_CFLAGS, a simply expanded variable, the call will happen every time the Makefile is parsed, even if there are no users of KBUILD_CFLAGS. Rather than redoing this computation every time, it makes a lot of sense to cache the result of all of the Makefile's compiler calls just like we do when we compile a ".c" file to a ".o" file. Conceptually this is quite a simple idea. ...and since the calls to invoke the compiler and similar tools are centrally located in the Kbuild.include file this doesn't even need to be super invasive. Implementing the cache in a simple-to-use and efficient way is not quite as simple as it first sounds, though. To get maximum speed we really want the cache in a format that make can natively understand and make doesn't really have an ability to load/parse files. ...but make _can_ import other Makefiles, so the solution is to store the cache in Makefile format. This requires coming up with a valid/unique Makefile variable name for each value to be cached, but that's solvable with some cleverness. After this change, we'll automatically create a ".cache.mk" file that will contain our cached variables. We'll load this on each invocation of make and will avoid recomputing anything that's already in our cache. The cache is stored in a format that it shouldn't need any invalidation since anything that might change should affect the "key" and any old cached value won't be used. Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Ingo Molnar <mingo@kernel.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-10kbuild: trivial cleanups on the commentsCao jin1-4/+3
This is a bunch of trivial fixes and cleanups. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-25kbuild: Add __cc-option macroMatthias Kaehlcke1-2/+12
cc-option uses KBUILD_CFLAGS and KBUILD_CPPFLAGS when it determines whether an option is supported or not. This is fine for options used to build the kernel itself, however some components like the x86 boot code use a different set of flags. Add the new macro __cc-option which is a more generic version of cc-option with additional parameters. One parameter is the compiler with which the check should be performed, the other the compiler options to be used instead KBUILD_C*FLAGS. Refactor cc-option and hostcc-option to use __cc-option and move hostcc-option to scripts/Kbuild.include. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Marek <mmarek@suse.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-25kbuild: remove cc-option-alignMasahiro Yamada1-5/+0
Documentation/kbuild/makefiles.txt says the change for align options occurred at GCC 3.0, and Documentation/process/changes.rst says the minimal supported GCC version is 3.2, so it should be safe to hard-code -falign* options. Fix the only user arch/x86/Makefile_32.cpu and remove cc-option-align. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-05-10Merge tag 'kbuild-v4.12' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - improve Clang support - clean up various Makefiles - improve build log visibility (objtool, alpha, ia64) - improve compiler flag evaluation for better build performance - fix GCC version-dependent warning - fix genksyms * tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (23 commits) kbuild: dtbinst: remove unnecessary __dtbs_install_prep target ia64: beatify build log for gate.so and gate-syms.o alpha: make short build log available for division routines alpha: merge build rules of division routines alpha: add $(src)/ rather than $(obj)/ to make source file path Makefile: evaluate LDFLAGS_BUILD_ID only once objtool: make it visible in make V=1 output kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS kbuild: Add support to generate LLVM assembly files kbuild: Add better clang cross build support kbuild: drop -Wno-unknown-warning-option from clang options kbuild: fix asm-offset generation to work with clang kbuild: consolidate redundant sed script ASM offset generation frv: Use OFFSET macro in DEF_*REG() kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7 kbuild: Consolidate header generation from ASM offset information kbuild: use -Oz instead of -Os when using clang kbuild, LLVMLinux: Add -Werror to cc-option to support clang Kbuild: make designated_init attribute fatal kbuild: drop unneeded patterns '.*.orig' and '.*.rej' from distclean ...
2017-04-12kbuild, LLVMLinux: Add -Werror to cc-option to support clangMark Charlebois1-3/+3
Clang will warn about unknown warnings but will not return false unless -Werror is set. GCC will return false if an unknown warning is passed. Adding -Werror make both compiler behave the same. [arnd: it turns out we need the same patch for testing whether -ffunction-sections works right with gcc. I've build tested extensively with this patch applied, so let's just merge this one now.] Signed-off-by: Mark Charlebois <charlebm@gmail.com> Signed-off-by: Behan Webster <behanw@converseincode.com> Reviewed-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-03-30x86/build: Mostly disable '-maccumulate-outgoing-args'Josh Poimboeuf1-0/+4
The GCC '-maccumulate-outgoing-args' flag is enabled for most configs, mostly because of issues which are no longer relevant. For most configs, and with most recent versions of GCC, it's no longer needed. Clarify which cases need it, and only enable it for those cases. Also produce a compile-time error for the ftrace graph + mcount + '-Os' case, which will otherwise cause runtime failures. The main benefit of '-maccumulate-outgoing-args' is that it prevents an ugly prologue for functions which have aligned stacks. But removing the option also has some benefits: more readable argument saves, smaller text size, and (presumably) slightly improved performance. Here are the object size savings for 32-bit and 64-bit defconfig kernels: text data bss dec hex filename 10006710 3543328 1773568 15323606 e9d1d6 vmlinux.x86-32.before 9706358 3547424 1773568 15027350 e54c96 vmlinux.x86-32.after text data bss dec hex filename 10652105 4537576 843776 16033457 f4a6b1 vmlinux.x86-64.before 10639629 4537576 843776 16020981 f475f5 vmlinux.x86-64.after That comes out to a 3% text size improvement on x86-32 and a 0.1% text size improvement on x86-64. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170316193133.zrj6gug53766m6nn@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-14Kbuild: Add cpp_its_S in ksym_dep_filterMarcin Nowakowski1-1/+1
Add a new command cpp_its_S introduced in commit cf2a5e0bb4c6 ("MIPS: Support generating Flattened Image Trees (.itb)") to ksym_dep_filter handler - otherwise a warning is produced during the build of MIPS platforms (when vmlinux.*.itb target is chosen). Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Michal Marek <mmarek@suse.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15278/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2016-08-08kbuild: no gcc-plugins during cc-option testsEmese Revfy1-3/+7
The gcc-plugins arguments should not be included when performing cc-option tests. Steps to reproduce: 1) make mrproper 2) make defconfig 3) enable GCC_PLUGINS, GCC_PLUGIN_CYC_COMPLEXITY 4) enable FUNCTION_TRACER (it will select other options as well) 5) make && make modules Build errors: MODPOST 18 modules ERROR: "__fentry__" [net/netfilter/xt_nat.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_mark.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_addrtype.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_LOG.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_sip.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_irc.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_ftp.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat.ko] undefined! Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: renamed variable, clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-07-18Kbuild: don't add obj tree in additional includesArnd Bergmann1-1/+1
When building with separate object directories and driver specific Makefiles that add additional header include paths, Kbuild adjusts the gcc flags so that we include both the directory in the source tree and in the object tree. However, due to another bug I fixed earlier, this did not actually include the correct directory in the object tree, so we know that we only really need the source tree here. Also, including the object tree sometimes causes warnings about nonexisting directories when the include path only exists in the source. This changes the logic to only emit the -I argument for the srctree, not for objects. We still need both $(srctree)/$(src) and $(obj) though, so I'm adding them manually. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-07-18Kbuild: don't add ../../ to include pathArnd Bergmann1-1/+1
When we build with O=objdir and objdir is directly below the source tree, $(srctree) becomes '..'. When a Makefile adds a CFLAGS option like -Ipath/to/headers and we are building with a separate object directory, Kbuild tries to add two -I options, one for the source tree and one for the object tree. An absolute path is treated as a special case, and don't add this one twice. This also normally catches -I$(srctree)/$(src) as $(srctree) usually is an absolute directory like /home/arnd/linux/. The combination of the two behaviors however results in an invalid path name to be included: we get both ../$(src) and ../../$(src), the latter one pointing outside of the source tree, usually to a nonexisting directory. Building with 'make W=1' makes this obvious: cc1: error: ../../arch/arm/mach-s3c24xx/include: No such file or directory [-Werror=missing-include-dirs] This adds another special case, treating path names starting with ../ like those starting with / so we don't try to prefix that with $(srctree). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-10kbuild: fix if_change and friends to consider argument orderMasahiro Yamada1-6/+5
Currently, arg-check is implemented as follows: arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \ $(filter-out $(cmd_$@), $(cmd_$(1))) ) This does not care about the order of arguments that appear in $(cmd_$(1)) and $(cmd_$@). So, if_changed and friends never rebuild the target if only the argument order is changed. This is a problem when the link order is changed. Apparently, obj-y += foo.o obj-y += bar.o and obj-y += bar.o obj-y += foo.o should be distinguished because the link order determines the probe order of drivers. So, built-in.o should be rebuilt when the order of objects is changed. This commit fixes arg-check to compare the old/current commands including the argument order. Of course, this change has a side effect; Kbuild will react to the change of compile option order. For example, "-DFOO -DBAR" and "-DBAR -DFOO" should give no difference to the build result, but false positive should be better than false negative. I am moving space_escape to the top of Kbuild.include just for a matter of preference. In practical terms, space_escape can be defined after arg-check because arg-check uses "=" flavor, not ":=". Having said that, collecting convenient variables in one place makes sense from the point of readability. Chaining "%%%SPACE%%%" to "_-_SPACE_-_" is also a matter of taste at this point. Actually, it can be arbitrary as long as it is an unlikely used string. The only problem I see in "%%%SPACE%%%" is that "%" is a special character in "$(patsubst ...)" context. This commit just uses "$(subst ...)" for arg-check, but I am fixing it now in case we might want to use it in $(patsubst ...) context in the future. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 19:33:34 +0000