| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the actual return value instead of always -1 if register_kretprobe()
failed.
E.g. without this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Operation not permitted
With this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Unknown symbol in module
Link: https://lkml.kernel.org/r/1635213091-24387-2-git-send-email-yangtiezhu@loongson.cn
Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-5-iii@linux.ibm.com
|
|
When compiling bpf samples, the following warning appears:
readelf: Error: Missing knowledge of 32-bit reloc types used in DWARF
sections of machine number 247
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 1 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
Same problem was mentioned in commit 2f0921262ba9 ("selftests/bpf:
suppress readelf stderr when probing for BTF support"), let's use
readelf that supports btf.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021123913.48833-1-pulehui@huawei.com
|
|
Adding simple module that uses multi direct interface:
register_ftrace_direct_multi
unregister_ftrace_direct_multi
The init function registers trampoline for 2 functions,
and exit function unregisters them.
Link: https://lkml.kernel.org/r/20211008091336.33616-9-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The coccinelle check report:
"./samples/bpf/xdp_redirect_cpu_user.c:397:32-38:
ERROR: application of sizeof to pointer"
Using the "strlen" to fix it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211012111649.983253-1-davidcomponentone@gmail.com
|
|
In samples/bpf/Makefile, libbpf has a FORCE dependency that force it to
be rebuilt. I read this as a way to keep the library up-to-date, given
that we do not have, in samples/bpf, a list of the source files for
libbpf itself. However, a better approach would be to use the
"$(wildcard ...)" function from make, and to have libbpf depend on all
the .c and .h files in its directory. This is what samples/bpf/Makefile
does for bpftool, and also what the BPF selftests' Makefile does for
libbpf.
Let's update the Makefile to avoid rebuilding libbpf all the time (and
bpftool on top of it).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-11-quentin@isovalent.com
|
|
API headers from libbpf should not be accessed directly from the source
directory. Instead, they should be exported with "make install_headers".
Make sure that samples/bpf/Makefile installs the headers properly when
building.
The object compiled from and exported by libbpf are now placed into a
subdirectory of sample/bpf/ instead of remaining in tools/lib/bpf/. We
attempt to remove this directory on "make clean". However, the "clean"
target re-enters the samples/bpf/ directory from the root of the
repository ("$(MAKE) -C ../../ M=$(CURDIR) clean"), in such a way that
$(srctree) and $(src) are not defined, making it impossible to use
$(LIBBPF_OUTPUT) and $(LIBBPF_DESTDIR) in the recipe. So we only attempt
to clean $(CURDIR)/libbpf, which is the default value.
Add a dependency on libbpf's headers for the $(TRACE_HELPERS).
We also change the output directory for bpftool, to place the generated
objects under samples/bpf/bpftool/ instead of building in bpftool's
directory directly. Doing so, we make sure bpftool reuses the libbpf
library previously compiled and installed.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-10-quentin@isovalent.com
|
|
Update samples/bpf/.gitignore to ignore files generated when building
the samples. Add:
- vmlinux.h
- the generated skeleton files (*.skel.h)
- the samples/bpf/libbpf/ and .../bpftool/ directories, in preparation
of a future commit which introduces a local output directory for
building libbpf and bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-9-quentin@isovalent.com
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace deprecated bpf_{map,program}__next APIs with newly added
bpf_object__next_{map,program} APIs, so that no compilation warnings
emit.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-3-hengqi.chen@gmail.com
|
|
Recent-ish versions of make do no longer consider number signs ("#") as
comment symbols when they are inserted inside of a macro reference or in
a function invocation. In such cases, the symbols should not be escaped.
There are a few occurrences of "\#" in libbpf's and samples' Makefiles.
In the former, the backslash is harmless, because grep associates no
particular meaning to the escaped symbol and reads it as a regular "#".
In samples' Makefile, recent versions of make will pass the backslash
down to the compiler, making the probe fail all the time and resulting
in the display of a warning about "make headers_install" being required,
even after headers have been installed.
A similar issue has been addressed at some other locations by commit
9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make").
Let's address it for libbpf's and samples' Makefiles in the same
fashion, by using a "$(pound)" variable (pulled from
tools/scripts/Makefile.include for libbpf, or re-defined for the
samples).
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Fixes: 2f3830412786 ("libbpf: Make libbpf_version.h non-auto-generated")
Fixes: 07c3bbdb1a9b ("samples: bpf: print a warning about headers_install")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006111049.20708-1-quentin@isovalent.com
|
|
libbpf and bpftool have been dual-licensed to facilitate inclusion in software
that is not compatible with GPL2-only (ie: Apache2), but the samples are still
GPL2-only.
Given these files are samples, they get naturally copied around. For example,
it is the case for samples/bpf/bpf_insn.h which was copied into the systemd
tree: https://github.com/systemd/systemd/blob/main/src/shared/linux/bpf_insn.h
Some more context on systemd's needs specifically:
Most of systemd is (L)GPL2-or-later, which means there is no perceived
incompatibility with Apache2 software and can thus be linked with
OpenSSL 3.0. But given this GPL2-only header is included this is currently
not possible. Dual-licensing this header solves this problem for us as we
are scoping a move to OpenSSL 3.0, see:
https://lists.freedesktop.org/archives/systemd-devel/2021-September/046882.html
Dual-license this header as GPL-2.0-only OR BSD-2-Clause to follow the same
licensing used by libbpf and bpftool:
1bc38b8ff6cc ("libbpf: relicense libbpf as LGPL-2.1 OR BSD-2-Clause")
907b22365115 ("tools: bpftool: dual license all files")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Daniel Mack <daniel@zonque.org>
Acked-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Chenbo Feng <fengc@google.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210923000540.47344-1-luca.boccassi@gmail.com
|
|
Generate vmlinux.h only from the in-tree vmlinux, and remove enum
declarations that would cause a build failure in case of version
mismatches.
There are now two options when building the samples:
1. Compile the kernel to use in-tree vmlinux for vmlinux.h
2. Override VMLINUX_BTF for samples using something like this:
make VMLINUX_BTF=/sys/kernel/btf/vmlinux -C samples/bpf
This change was tested with relative builds, e.g. cases like:
* make O=build -C samples/bpf
* make KBUILD_OUTPUT=build -C samples/bpf
* make -C samples/bpf
* cd samples/bpf && make
When a suitable VMLINUX_BTF is not found, the following message is
printed:
/home/kkd/src/linux/samples/bpf/Makefile:333: *** Cannot find a vmlinux
for VMLINUX_BTF at any of " ./vmlinux", build the kernel or set
VMLINUX_BTF variable. Stop.
Fixes: 384b6b3bbf0d (samples: bpf: Add vmlinux.h generation support)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210928054608.1799021-1-memxor@gmail.com
|
|
The ARP table that is dumped when the xdp_router_ipv4 process is launched
has the IP address & MAC address in non-readable network byte order format,
also the alignment is off when printing the table.
Address HwAddress
160000e0 1600005e0001
ff96a8c0 ffffffffffff
faffffef faff7f5e0001
196a8c0 9607871293ea
fb0000e0 fb00005e0001
0 0
196a8c0 9607871293ea
ffff11ac ffffffffffff
faffffef faff7f5e0001
fb0000e0 fb00005e0001
160000e0 1600005e0001
160000e0 1600005e0001
faffffef faff7f5e0001
fb0000e0 fb00005e0001
40011ac 40011ac4202
Fix this by converting the "Address" field from network byte order Hex into
dotted decimal notation IPv4 format and "HwAddress" field from network byte
order Hex into Colon separated Hex format. Also fix the aligntment of the
fields in the ARP table.
Address HwAddress
224.0.0.22 01:00:5e:00:00:16
192.168.150.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
192.168.150.1 ea:93:12:87:07:96
224.0.0.251 01:00:5e:00:00:fb
0.0.0.0 00:00:00:00:00:00
192.168.150.1 ea:93:12:87:07:96
172.17.255.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
224.0.0.22 01:00:5e:00:00:16
224.0.0.22 01:00:5e:00:00:16
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
172.17.0.4 02:42:ac:11:00:04
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-2-gokulkumar792@gmail.com
|
|
The route table that is dumped when the xdp_router_ipv4 process is launched
has the "Gateway" field in non-readable network byte order format, also the
alignment is off when printing the table.
Destination Gateway Genmask Metric Iface
0.0.0.0 196a8c0 0 0 enp7s0
0.0.0.0 196a8c0 0 0 wlp6s0
169.254.0.0 196a8c0 16 0 enp7s0
172.17.0.0 0 16 0 docker0
192.168.150.0 0 24 0 enp7s0
192.168.150.0 0 24 0 wlp6s0
Fix this by converting the "Gateway" field from network byte order Hex into
dotted decimal notation IPv4 format and "Genmask" from CIDR notation into
dotted decimal notation IPv4 format. Also fix the aligntment of the fields
in the route table.
Destination Gateway Genmask Metric Iface
0.0.0.0 192.168.150.1 0.0.0.0 0 enp7s0
0.0.0.0 192.168.150.1 0.0.0.0 0 wlp6s0
169.254.0.0 192.168.150.1 255.255.0.0 0 enp7s0
172.17.0.0 0.0.0.0 255.255.0.0 0 docker0
192.168.150.0 0.0.0.0 255.255.255.0 0 enp7s0
192.168.150.0 0.0.0.0 255.255.255.0 0 wlp6s0
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-1-gokulkumar792@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Changes for kgdb/kdb this cycle are dominated by a change from Sumit
that removes as small (256K) private heap from kdb. This is change
I've hoped for ever since I discovered how few users of this heap
remained in the kernel, so many thanks to Sumit for hunting these
down.
The other change is an incremental step towards SPDX headers"
* tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kernel: debug: Convert to SPDX identifier
kdb: Rename members of struct kdbtab_t
kdb: Simplify kdb_defcmd macro logic
kdb: Get rid of redundant kdb_register_flags()
kdb: Rename struct defcmd_set to struct kdb_macro
kdb: Get rid of custom debug heap allocator
|
|
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While at it, also improve help output when CPU number is greater than
possible.
Fixes: e531a220cc59 ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210826120910.454081-1-memxor@gmail.com
|
|
All pktgen samples can send indefinitely num messages per thread by
setting the count option to 0(-n 0). If running sample with setting
count 0 and press Ctrl-C to stop this program, the program prints the
result of the execution so far. Currently, the samples besides
sample{3...5} don't work properly. Because Ctrl-C stops the script, not
just pktgen.
This is results of samples:
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 0
Running... ctrl^C to stop
^CDevice: eth0@0
Result: OK: 569657(c569538+d118) usec, 84650 (60byte,0frags)
148597pps 71Mb/sec (71326560bps) errors: 0
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -n 0
Running... ctrl^C to stop
^C
In order to solve this, this commit adds trap SIGINT. Also, this commit
changes control_c function to print_result to maintain consistency with
other samples.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, most pktgen samples print the execution result when the
program is terminated normally. However, sample03 doesn't work
appropriately.
This is results of samples:
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1
Running... ctrl^C to stop
Device: eth0@0
Result: OK: 19(c5+d13) usec, 1 (60byte,0frags)
51762pps 24Mb/sec (24845760bps) errors: 0
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1
Running... ctrl^C to stop
The reason why it doesn't print the execution result when the program is
terminated usually is that sample03 doesn't call the function which
prints the result, unlike other samples.
So, this commit solves this issue by calling the function before
termination. Also, this commit changes control_c function to
print_result to maintain consistency with other samples.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper. Also adapt to change of type of mac address map, so that
no resizing is required.
Add a new flag for sample mask that skips priting the
from_device->to_device heading for each line, as xdp_redirect_map_multi
may have two devices but the flow of data may be bidirectional, so the
output would be confusing.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-23-memxor@gmail.com
|
|
One of the notable changes is using a BPF_MAP_TYPE_HASH instead of array
map to store mac addresses of devices, as the resizing behavior was
based on max_ifindex, which unecessarily maximized the capacity of map
beyond what was needed.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-22-memxor@gmail.com
|
|
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
Since get_mac_addr is already provided by XDP samples helper, we drop
it. Also convert to XDP samples helper similar to prior samples to
minimize duplication of code.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-21-memxor@gmail.com
|
|
Also update it to use consistent SEC("xdp") and SEC("xdp_devmap")
naming, and use global variable instead of BPF map for copying the mac
address.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-20-memxor@gmail.com
|
|
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
Similar to xdp_monitor, xdp_redirect_cpu was quite featureful except a
few minor omissions (e.g. redirect errno reporting). All of these have
been moved to XDP samples helper, hence drop the unneeded code and
convert to usage of helpers provided by it.
One of the important changes here is dropping of mprog-disable option,
as we make that the default. Also, we support built-in programs for some
common actions on the packet when it reaches kthread (pass, drop,
redirect to device). If the user still needs to install a custom
program, they can still supply a BPF object, however the program should
be suitably tagged with SEC("xdp_cpumap") annotation so that the
expected attach type is correct when updating our cpumap map element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-19-memxor@gmail.com
|
|
Similar to xdp_monitor_kern, a lot of these BPF programs have been
reimplemented properly consolidating missing features from other XDP
samples. Hence, drop the unneeded code and rename to .bpf.c suffix.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-18-memxor@gmail.com
|
|
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
One important note:
The XDP samples helper handles ownership of installed XDP programs on
devices, including responding to SIGINT and SIGTERM, so drop the code
here and use the helpers we provide going forward for all xdp_redirect*
conversions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-17-memxor@gmail.com
|
|
We moved swap_src_dst_mac to xdp_sample.bpf.h to be shared with other
potential users, so drop it while moving code to the new file.
Also, consistently use SEC("xdp") naming instead.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-16-memxor@gmail.com
|
|
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
A lot of the code in xdp_monitor and xdp_redirect_cpu has been moved to
the xdp_sample_user.o helper, so we remove the duplicate functions here
that are no longer needed.
Thanks to BPF skeleton, we no longer depend on order of tracepoints to
uninstall them on startup. Instead, the sample mask is used to install
the needed tracepoints.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-15-memxor@gmail.com
|
|
We already moved all the functionality it provided in XDP samples helper
userspace and kernel BPF object, so just delete the unneeded code.
We also add generation of BPF skeleton and compilation using clang
-target bpf for files ending with .bpf.c suffix (to denote that they use
vmlinux.h).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-14-memxor@gmail.com
|
|
Also, take this opportunity to depend on in-tree bpftool, so that we can
use static linking support in subsequent commits for XDP samples BPF
helper object.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-13-memxor@gmail.com
|
|
This adds support for retrieval and printing for devmap_xmit total and
mutli mode tracepoint. For multi mode, we keep a hash map entry for each
redirection stream, such that we can dynamically add and remove entries
on output.
The from_match and to_match will be set by individual samples when
setting up the XDP program on these devices.
The multi mode tracepoint is also handy for xdp_redirect_map_multi,
where up to 32 devices can be specified.
Also add samples_init_pre_load macro to finally set up the resized maps
and mmap them in place for low overhead stats retrieval.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-12-memxor@gmail.com
|
|
This adds support for the devmap_xmit tracepoint, and its multi device
variant that can be used to obtain streams for each individual
net_device to net_device redirection. This is useful for decomposing
total xmit stats in xdp_monitor.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-11-memxor@gmail.com
|
|
This consolidates retrieval and printing into the XDP sample helper. For
the kthread stats, it expands xdp_stats separately with its own per-CPU
stats. For cpumap enqueue, we display FROM->TO stats also with its
per-CPU stats.
The help out explains in detail the various aspects of the output.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-10-memxor@gmail.com
|
|
These are invoked in two places, when the XDP frame or SKB (for generic
XDP) enqueued to the ptr_ring (cpumap_enqueue) and when kthread processes
the frame after invoking the CPUMAP program for it (returning stats for
the batch).
We use cpumap_map_id to filter on the map_id as a way to avoid printing
incorrect stats for parallel sessions of xdp_redirect_cpu.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-9-memxor@gmail.com
|
|
This implements the retrieval and printing, as well the help output.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-8-memxor@gmail.com
|
|
This would allow us to store stats for each XDP action, including their
per-CPU counts. Consolidating this here allows all redirect samples to
detect xdp_exception events.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-7-memxor@gmail.com
|
|
This implements per-errno reporting (for the ones we explicitly
recognize), adds some help output, and implements the stats retrieval
and printing functions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-6-memxor@gmail.com
|
|
This adds the shared BPF file that will be used going forward for
sharing tracepoint programs among XDP redirect samples.
Since vmlinux.h conflicts with tools/include for READ_ONCE/WRITE_ONCE
and ARRAY_SIZE, they are copied in to xdp_sample.bpf.h along with other
helpers that will be required.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-5-memxor@gmail.com
|
|
This file implements some common helpers to consolidate differences in
features and functionality between the various XDP samples and give them
a consistent look, feel, and reporting capabilities.
This commit only adds support for receive statistics, which does not
rely on any tracepoint, but on the XDP program installed on the device
by each XDP redirect sample.
Some of the key features are:
* A concise output format accompanied by helpful text explaining its
fields.
* An elaborate output format building upon the concise one, and folding
out details in case of errors and staying out of view otherwise.
* Printing driver names for devices redirecting packets.
* Getting mac address for interface.
* Printing summarized total statistics for the entire session.
* Ability to dynamically switch between concise and verbose mode, using
SIGQUIT (Ctrl + \).
In later patches, the support will be extended for each tracepoint with
its own custom output in concise and verbose mode.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-4-memxor@gmail.com
|
|
cookie_uid_helper_example.c: In function ‘main’:
cookie_uid_helper_example.c:178:69: warning: ‘ -j ACCEPT’ directive
writing 10 bytes into a region of size between 8 and 58
[-Wformat-overflow=]
178 | sprintf(rules, "iptables -A OUTPUT -m bpf --object-pinned %s -j ACCEPT",
| ^~~~~~~~~~
/home/kkd/src/linux/samples/bpf/cookie_uid_helper_example.c:178:9: note:
‘sprintf’ output between 53 and 103 bytes into a destination of size 100
178 | sprintf(rules, "iptables -A OUTPUT -m bpf --object-pinned %s -j ACCEPT",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
179 | file);
| ~~~~~
Fix by using snprintf and a sufficiently sized buffer.
tracex4_user.c:35:15: warning: ‘write’ reading 12 bytes from a region of
size 11 [-Wstringop-overread]
35 | key = write(1, "\e[1;1H\e[2J", 12); /* clear screen */
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use size as 11.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-2-memxor@gmail.com
|
|
There's a few cases that a string that is to be recorded in a trace event,
does not have a terminating 'nul' character, and instead, the tracepoint
passes in the length of the string to record.
Add two helper macros to the trace event code that lets this work easier,
than tricks with "%.*s" logic.
__string_len() which is similar to __string() for declaration, but takes a
length argument.
__assign_str_len() which is similar to __assign_str() for assiging the
string, but it too takes a length argument.
Note, the TRACE_EVENT() macro will allocate the location on the ring
buffer to 'len + 1', that will be used to store the string into. It is a
requirement that the 'len' used for this is a most the length of the
string being recorded.
This string can still use __get_str() just like strings created with
__string() can use to retrieve the string.
Link: https://lore.kernel.org/linux-nfs/20210513105018.7539996a@gandalf.local.home/
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, "sample04" and "sample05" are not working properly when
running with an IPv6 option("-6"). The commit 0f06a6787e05 ("samples:
Add an IPv6 "-6" option to the pktgen scripts") has omitted the addition
of this option at "sample04" and "sample05".
In order to support IPv6 option, this commit adds logic related to IPv6
option.
Fixes: 0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All pktgen samples can use the environment variable instead of option
parameters(eg. $DEV is able to use instead of '-i' option).
This is results of running sample as root and user:
// running as root
# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
Running... ctrl^C to stop
// running as normal user
$ DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -v -n 1
[...]
ERROR: Please specify output device
This results show the sample doesn't work properly when the sample runs
as normal user. Because the sample is restarted by the function
(root_check_run_with_sudo) to run with sudo. In this process, the
environment variable of normal user doesn't propagate to sudo.
It can be solved by using "-E"(--preserve-env) option of "sudo", which
preserve normal user's existing environment variables. So this commit
adds "-E" option in the function (root_check_run_with_sudo).
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
