summaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2017-08-16bpf: sockmap sample programJohn Fastabend4-2/+480
This program binds a program to a cgroup and then matches hard coded IP addresses and adds these to a sockmap. This will receive messages from the backend and send them to the client. client:X <---> frontend:10000 client:X <---> backend:10001 To keep things simple this is only designed for 1:1 connections using hard coded values. A more complete example would allow many backends and clients. To run, # sockmap <cgroup2_dir> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07bpf: add a test case for syscalls/sys_{enter|exit}_* tracepointsYonghong Song3-0/+137
Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+3
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31samples/bpf: fix bpf tunnel cleanupWilliam Tu2-2/+3
test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the next geneve tunnelling test case fails. In addition, the geneve reserved bit in tcbpf2_kern.c should be zero, according to the RFC. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+4
2017-07-17samples/bpf: add option for native and skb mode for redirect appsAndy Gospodarek2-18/+82
When testing with a driver that has both native and generic redirect support: $ sudo ./samples/bpf/xdp_redirect -N 5 6 input: 5 output: 6 ifindex 6: 4961879 pkt/s ifindex 6: 6391319 pkt/s ifindex 6: 6419468 pkt/s $ sudo ./samples/bpf/xdp_redirect -S 5 6 input: 5 output: 6 ifindex 6: 1845435 pkt/s ifindex 6: 3882850 pkt/s ifindex 6: 3893974 pkt/s $ sudo ./samples/bpf/xdp_redirect_map -N 5 6 input: 5 output: 6 map[0] (vports) = 4, map[1] (map) = 5, map[2] (count) = 0 ifindex 6: 2207374 pkt/s ifindex 6: 6212869 pkt/s ifindex 6: 6286515 pkt/s $ sudo ./samples/bpf/xdp_redirect_map -S 5 6 input: 5 output: 6 map[0] (vports) = 4, map[1] (map) = 5, map[2] (count) = 0 ifindex 6: 5052528 pkt/s ifindex 6: 5736631 pkt/s ifindex 6: 5739962 pkt/s Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17xdp: bpf redirect with map sample programJohn Fastabend3-0/+192
Signed-off-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17xdp: sample program for new bpf_redirect helperJohn Fastabend3-0/+187
This implements a sample program for testing bpf_redirect. It reports the number of packets redirected per second and as input takes the ifindex of the device to run the xdp program on and the ifindex of the interface to redirect packets to. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-4/+4
Merge yet more updates from Andrew Morton: - various misc things - kexec updates - sysctl core updates - scripts/gdb udpates - checkpoint-restart updates - ipc updates - kernel/watchdog updates - Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature" - "stackprotector: ascii armor the stack canary" - more MM bits - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits) writeback: rework wb_[dec|inc]_stat family of functions ARM: samsung: usb-ohci: move inline before return type video: fbdev: omap: move inline before return type video: fbdev: intelfb: move inline before return type USB: serial: safe_serial: move __inline__ before return type drivers: tty: serial: move inline before return type drivers: s390: move static and inline before return type x86/efi: move asmlinkage before return type sh: move inline before return type MIPS: SMP: move asmlinkage before return type m68k: coldfire: move inline before return type ia64: sn: pci: move inline before type ia64: move inline before return type FRV: tlbflush: move asmlinkage before return type CRIS: gpio: move inline before return type ARM: HP Jornada 7XX: move inline before return type ARM: KVM: move asmlinkage before type checkpatch: improve the STORAGE_CLASS test mm, migration: do not trigger OOM killer when migrating memory drm/i915: use __GFP_RETRY_MAYFAIL ...
2017-07-12kfifo: clean up example to not use page_linkLogan Gunthorpe1-4/+4
This is a layering violation so we replace the uses with calls to sg_page(). This is a prep patch for replacing page_link and this is one of the very few uses outside of scatterlist.h. Link: http://lkml.kernel.org/r/1495663199-22234-1-git-send-email-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by: Stefani Seibold <stefani@seibold.net> Cc: Stefani Seibold <stefani@seibold.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11samples/bpf: fix a build issueYonghong Song2-198/+1
With latest net-next: ==== clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -Isamples/bpf \ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \ -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -Wno-unknown-warning-option \ -O2 -emit-llvm -c samples/bpf/tcp_synrto_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/tcp_synrto_kern.o samples/bpf/tcp_synrto_kern.c:20:10: fatal error: 'bpf_endian.h' file not found ^~~~~~~~~~~~~~ 1 error generated. ==== net has the same issue. Add support for ntohl and htonl in tools/testing/selftests/bpf/bpf_endian.h. Also move bpf_helpers.h from samples/bpf to selftests/bpf and change compiler include logic so that programs in samples/bpf can access the headers in selftests/bpf, but not the other way around. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-05bpf: fix return in load_bpf_fileLawrence Brakmo1-2/+6
The function load_bpf_file ignores the return value of load_and_attach(), so even if load_and_attach() returns an error, load_bpf_file() will return 0. Now, load_bpf_file() can call load_and_attach() multiple times and some can succeed and some could fail. I think the correct behavor is to return error on the first failed load_and_attach(). v2: Added missing SOB Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample bpf program to set sndcwnd clampLawrence Brakmo2-0/+103
Sample BPF program, tcp_clamp_kern.c, to demostrate the use of setting the sndcwnd clamp. This program assumes that if the first 5.5 bytes of the host's IPv6 addresses are the same, then the hosts are in the same datacenter and sets sndcwnd clamp to 100 packets, SYN and SYN-ACK RTOs to 10ms and send/receive buffer sizes to 150KB. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample BPF program to set initial cwndLawrence Brakmo2-0/+89
Sample BPF program that assumes hosts are far away (i.e. large RTTs) and sets initial cwnd and initial receive window to 40 packets, send and receive buffers to 1.5MB. In practice there would be a test to insure the hosts are actually far enough away. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample BPF program to set congestion controlLawrence Brakmo2-0/+84
Sample BPF program that sets congestion control to dctcp when both hosts are within the same datacenter. In this example that is assumed to be when they have the first 5.5 bytes of their IPv6 address are the same. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample BPF program to set buffer sizesLawrence Brakmo2-0/+87
This patch contains a BPF program to set initial receive window to 40 packets and send and receive buffers to 1.5MB. This would usually be done after doing appropriate checks that indicate the hosts are far enough away (i.e. large RTT). Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Add setsockopt helper function to bpfLawrence Brakmo1-0/+3
Added support for calling a subset of socket setsockopts from BPF_PROG_TYPE_SOCK_OPS programs. The code was duplicated rather than making the changes to call the socket setsockopt function because the changes required would have been larger. The ops supported are: SO_RCVBUF SO_SNDBUF SO_MAX_PACING_RATE SO_PRIORITY SO_RCVLOWAT SO_MARK Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample bpf program to set initial windowLawrence Brakmo2-0/+70
The sample bpf program, tcp_rwnd_kern.c, sets the initial advertized window to 40 packets in an environment where distinct IPv6 prefixes indicate that both hosts are not in the same data center. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: Sample bpf program to set SYN/SYN-ACK RTOsLawrence Brakmo2-0/+70
The sample BPF program, tcp_synrto_kern.c, sets the SYN and SYN-ACK RTOs to 10ms when both hosts are within the same datacenter (i.e. small RTTs) in an environment where common IPv6 prefixes indicate both hosts are in the same data center. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: program to load and attach sock_ops BPF progsLawrence Brakmo2-0/+100
The program load_sock_ops can be used to load sock_ops bpf programs and to attach it to an existing (v2) cgroup. It can also be used to detach sock_ops programs. Examples: load_sock_ops [-l] <cg-path> <prog filename> Load and attaches a sock_ops program at the specified cgroup. If "-l" is used, the program will continue to run to output the BPF log buffer. If the specified filename does not end in ".o", it appends "_kern.o" to the name. load_sock_ops -r <cg-path> Detaches the currently attached sock_ops program from the specified cgroup. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01bpf: BPF support for sock_opsLawrence Brakmo1-3/+10
Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29bpf: Add test for syscall on fd array/htab lookupMartin KaFai Lau2-1/+31
Checks are added to the existing sockex3 and test_map_in_map test. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-22samples/bpf: fix a build problemYonghong Song1-1/+1
tracex5_kern.c build failed with the following error message: ../samples/bpf/tracex5_kern.c:12:10: fatal error: 'syscall_nrs.h' file not found #include "syscall_nrs.h" The generated file syscall_nrs.h is put in build/samples/bpf directory, but this directory is not in include path, hence build failed. The fix is to add $(obj) into the clang compilation path. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16pktgen: Specify the index of first threadTariq Toukan8-18/+27
Use "-f <num>", to specify the index of the first sender thread. In default first thread is #0. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16pktgen: Specify num packets per threadTariq Toukan9-8/+15
Use -n <num>, to specify the number of packets every thread sends. Zero means indefinitely. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14samples/bpf: Fix tracex5 to work with MIPS syscalls.David Daney3-3/+33
There are two problems: 1) In MIPS the __NR_* macros expand to an expression, this causes the sections of the object file to be named like: . . . [ 5] kprobe/(5000 + 1) PROGBITS 0000000000000000 000160 ... [ 6] kprobe/(5000 + 0) PROGBITS 0000000000000000 000258 ... [ 7] kprobe/(5000 + 9) PROGBITS 0000000000000000 000348 ... . . . The fix here is to use the "asm_offsets" trick to evaluate the macros in the C compiler and generate a header file with a usable form of the macros. 2) MIPS syscall numbers start at 5000, so we need a bigger map to hold the sub-programs. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14bpf: Add MIPS support to samples/bpf.David Daney1-0/+13
Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04samples/bpf: add tests for more perf event typesTeng Qin4-56/+228
$ trace_event tests attaching BPF program to HW_CPU_CYCLES, SW_CPU_CLOCK, HW_CACHE_L1D and other events. It runs 'dd' in the background while bpf program collects user and kernel stack trace on counter overflow. User space expects to see sys_read and sys_write in the kernel stack. $ tracex6 tests reading of various perf counters from BPF program. Both tests were refactored to increase coverage and be more accurate. Signed-off-by: Teng Qin <qinteng@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31samples/bpf: bpf_load.c order of prog_fd[] should correspond with ELF orderJesper Dangaard Brouer1-14/+5
An eBPF ELF file generated with LLVM can contain several program section, which can be used for bpf tail calls. The bpf prog file descriptors are accessible via array prog_fd[]. At-least XDP samples assume ordering, and uses prog_fd[0] is the main XDP program to attach. The actual order of array prog_fd[] depend on whether or not a bpf program section is referencing any maps or not. Not using a map result in being loaded/processed after all other prog section. Thus, this can lead to some very strange and hard to debug situation, as the user can only see a FD and cannot correlated that with the ELF section name. The fix is rather simple, and even removes duplicate memcmp code. Simply load program sections as the last step, instead of load_and_attach while processing the relocation section. When working with tail calls, it become even more essential that the order of prog_fd[] is consistant, like the current dependency of the map_fd[] order. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11samples/bpf: run cleanup routines when receiving SIGTERMAndy Gospodarek7-1/+9
Shahid Habib noticed that when xdp1 was killed from a different console the xdp program was not cleaned-up properly in the kernel and it continued to forward traffic. Most of the applications in samples/bpf cleanup properly, but only when getting SIGINT. Since kill defaults to using SIGTERM, add support to cleanup when the application receives either SIGINT or SIGTERM. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Shahid Habib <shahid.habib@broadcom.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11xdp: add flag to enforce driver modeDaniel Borkmann2-3/+12
After commit b5cdae3291f7 ("net: Generic XDP") we automatically fall back to a generic XDP variant if the driver does not support native XDP. Allow for an option where the user can specify that always the native XDP variant should be selected and in case it's not supported by a driver, just bail out. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-04Merge tag 'char-misc-4.12-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of new char/misc driver drivers and features for 4.12-rc1. There's lots of new drivers added this time around, new firmware drivers from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and a bunch of other driver updates. Nothing major, except if you happen to have the hardware for these drivers, and then you will be happy :) All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) firmware: google memconsole: Fix return value check in platform_memconsole_init() firmware: Google VPD: Fix return value check in vpd_platform_init() goldfish_pipe: fix build warning about using too much stack. goldfish_pipe: An implementation of more parallel pipe fpga fr br: update supported version numbers fpga: region: release FPGA region reference in error path fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe() mei: drop the TODO from samples firmware: Google VPD sysfs driver firmware: Google VPD: import lib_vpd source files misc: lkdtm: Add volatile to intentional NULL pointer reference eeprom: idt_89hpesx: Add OF device ID table misc: ds1682: Add OF device ID table misc: tsl2550: Add OF device ID table w1: Remove unneeded use of assert() and remove w1_log.h w1: Use kernel common min() implementation uio_mf624: Align memory regions to page size and set correct offsets uio_mf624: Refactor memory info initialization uio: Allow handling of non page-aligned memory regions hangcheck-timer: Fix typo in comment ...
2017-05-03samples/bpf: export map_data[] for more info on mapsJesper Dangaard Brouer1-1/+7
Giving *_user.c side tools access to map_data[] provides easier access to information on the maps being loaded. Still provide the guarantee that the order maps are being defined in inside the _kern.c file corresponds with the order in the array. Now user tools are not blind, but can inspect and verify the maps that got loaded from the ELF binary. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03samples/bpf: load_bpf.c make callback fixup more flexibleJesper Dangaard Brouer3-18/+23
Do this change before others start to use this callback. Change map_perf_test_user.c which seems to be the only user. This patch extends capabilities of commit 9fd63d05f3e8 ("bpf: Allow bpf sample programs (*_user.c) to change bpf_map_def"). Give fixup callback access to struct bpf_map_data, instead of only stuct bpf_map_def. This add flexibility to allow userspace to reassign the map file descriptor. This is very useful when wanting to share maps between several bpf programs. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03samples/bpf: make bpf_load.c code compatible with ELF maps section changesJesper Dangaard Brouer1-69/+155
This patch does proper parsing of the ELF "maps" section, in-order to be both backwards and forwards compatible with changes to the map definition struct bpf_map_def, which gets compiled into the ELF file. The assumption is that new features with value zero, means that they are not in-use. For backward compatibility where loading an ELF file with a smaller struct bpf_map_def, only copy objects ELF size, leaving rest of loaders struct zero. For forward compatibility where ELF file have a larger struct bpf_map_def, only copy loaders own struct size and verify that rest of the larger struct is zero, assuming this means the newer feature was not activated, thus it should be safe for this older loader to load this newer ELF file. Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map") Fixes: 409526bea3c3 ("samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03samples/bpf: adjust rlimit RLIMIT_MEMLOCK for traceex2, tracex3 and tracex4Jesper Dangaard Brouer3-0/+22
Needed to adjust max locked memory RLIMIT_MEMLOCK for testing these bpf samples as these are using more and larger maps than can fit in distro default 64Kbytes limit. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02Merge branch 'for-linus' of ↵Linus Torvalds1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatch updates from Jiri Kosina: - a per-task consistency model is being added for architectures that support reliable stack dumping (extending this, currently rather trivial set, is currently in the works). This extends the nature of the types of patches that can be applied by live patching infrastructure. The code stems from the design proposal made [1] back in November 2014. It's a hybrid of SUSE's kGraft and RH's kpatch, combining advantages of both: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Most of the heavy lifting done by Josh Poimboeuf with help from Miroslav Benes and Petr Mladek [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz - module load time patch optimization from Zhou Chengming - a few assorted small fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add missing printk newlines livepatch: Cancel transition a safe way for immediate patches livepatch: Reduce the time of finding module symbols livepatch: make klp_mutex proper part of API livepatch: allow removal of a disabled patch livepatch: add /proc/<pid>/patch_state livepatch: change to a per-task consistency model livepatch: store function sizes livepatch: use kstrtobool() in enabled_store() livepatch: move patching functions into patch.c livepatch: remove unnecessary object loaded check livepatch: separate enabled and patched states livepatch/s390: add TIF_PATCH_PENDING thread flag livepatch/s390: reorganize TIF thread flag bits livepatch/powerpc: add TIF_PATCH_PENDING thread flag livepatch/x86: add TIF_PATCH_PENDING thread flag livepatch: create temporary klp_update_patch_state() stub x86/entry: define _TIF_ALLWORK_MASK flags explicitly stacktrace/x86: add function for detecting reliable stack traces
2017-05-02bpf, samples: fix build warning in cookie_uid_helper_exampleDaniel Borkmann1-3/+3
Fix the following warnings triggered by 51570a5ab2b7 ("A Sample of using socket cookie and uid for traffic monitoring"): In file included from /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:54:0: /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c: In function 'prog_load': /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:119:27: warning: overflow in implicit constant conversion [-Woverflow] -32 + offsetof(struct stats, uid)), ^ /home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM' .off = OFF, \ ^ /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:121:27: warning: overflow in implicit constant conversion [-Woverflow] -32 + offsetof(struct stats, packets), 1), ^ /home/foo/net-next/samples/bpf/libbpf.h:155:12: note: in definition of macro 'BPF_ST_MEM' .off = OFF, \ ^ /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:129:27: warning: overflow in implicit constant conversion [-Woverflow] -32 + offsetof(struct stats, bytes)), ^ /home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM' .off = OFF, \ ^ HOSTLD /home/foo/net-next/samples/bpf/per_socket_stats_example Fixes: 51570a5ab2b7 ("A Sample of using socket cookie and uid for traffic monitoring") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01samples/bpf: fix XDP_FLAGS_SKB_MODE detach for xdp_tx_iptunnelJesper Dangaard Brouer1-2/+2
The xdp_tx_iptunnel program can be terminated in two ways, after N-seconds or via Ctrl-C SIGINT. The SIGINT code path does not handle detatching the correct XDP program, in-case the program was attached with XDP_FLAGS_SKB_MODE. Fix this by storing the XDP flags as a global variable, which is available for the SIGINT handler function. Fixes: 3993f2cb983b ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01samples/bpf: fix SKB_MODE flag to be a 32-bit unsigned intJesper Dangaard Brouer4-10/+11
The kernel side of XDP_FLAGS_SKB_MODE is unsigned, and the rtnetlink IFLA_XDP_FLAGS is defined as NLA_U32. Thus, userspace programs under samples/bpf/ should use the correct type. Fixes: 3993f2cb983b ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrongJesper Dangaard Brouer1-9/+31
The struct bpf_map_def was extended in commit fb30d4b71214 ("bpf: Add tests for map-in-map") with member unsigned int inner_map_idx. This changed the size of the maps section in the generated ELF _kern.o files. Unfortunately the loader in bpf_load.c does not detect or handle this. Thus, older _kern.o files became incompatible, and caused hard-to-debug errors where the syscall validation rejected BPF_MAP_CREATE request. This patch only detect the situation and aborts load_bpf_file(). It also add code comments warning people that read this loader for inspiration for these pitfalls. Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnelDavid Ahern4-16/+58
Add option to xdp1 and xdp_tx_iptunnel to insert xdp program in SKB_MODE: - update set_link_xdp_fd to take a flags argument that is added to the RTM_SETLINK message - Add -S option to xdp1 and xdp_tx_iptunnel user code. When passed in XDP_FLAGS_SKB_MODE is set in the flags arg passed to set_link_xdp_fd Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26mei: drop the TODO from samplesTomas Winkler1-2/+0
The TODO file is not relevant anymore and it's just a leftover from the time the driver was in the staging tree. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-24samples/bpf: check before defining offsetofAlexander Alemayhu1-1/+3
Fixes the following warning samples/bpf/test_lru_dist.c:28:0: warning: "offsetof" redefined #define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER) In file included from ./tools/lib/bpf/bpf.h:25:0, from samples/bpf/libbpf.h:5, from samples/bpf/test_lru_dist.c:24: /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:417:0: note: this is the location of the previous definition #define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER) Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24samples/bpf: add static to function with no prototypeAlexander Alemayhu1-1/+1
Fixes the following warning samples/bpf/cookie_uid_helper_example.c: At top level: samples/bpf/cookie_uid_helper_example.c:276:6: warning: no previous prototype for ‘finish’ [-Wmissing-prototypes] void finish(int ret) ^~~~~~ HOSTLD samples/bpf/per_socket_stats_example Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24samples/bpf: add -Wno-unknown-warning-option to clangAlexander Alemayhu1-0/+1
I was initially going to remove '-Wno-address-of-packed-member' because I thought it was not supposed to be there but Daniel suggested using '-Wno-unknown-warning-option'. This silences several warnings similiar to the one below warning: unknown warning option '-Wno-address-of-packed-member' [-Wunknown-warning-option] 1 warning generated. clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h \ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \ -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -O2 -emit-llvm -c samples/bpf/xdp_tx_iptunnel_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/xdp_tx_iptunnel_kern.o $ clang --version clang version 3.9.1 (tags/RELEASE_391/final) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /usr/bin Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22bpf: Add sparc support to tools and samples.David S. Miller1-0/+19
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-04-17bpf: lru: Add map-in-map LRU exampleMartin KaFai Lau2-3/+93
This patch adds a map-in-map LRU example. If we know only a subset of cores will use the LRU, we can allocate a common LRU list per targeting core and store it into an array-of-hashs. It allows using the common LRU map with map-update performance comparable to the BPF_F_NO_COMMON_LRU map but without wasting memory on the unused cores that we know they will never access the LRU map. BPF_F_NO_COMMON_LRU: > map_perf_test 32 8 10000000 10000000 | awk '{sum += $3}END{print sum}' 9234314 (9.23M/s) map-in-map LRU: > map_perf_test 512 8 1260000 80000000 | awk '{sum += $3}END{print sum}' 9962743 (9.96M/s) Notes that the max_entries for the map-in-map LRU test is 1260000 which is the max_entries for each inner LRU map. 8 processes have been started, so 8 * 1260000 = 10080000 (~10M) which is close to what is used in the BPF_F_NO_COMMON_LRU test. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17bpf: Allow bpf sample programs (*_user.c) to change bpf_map_defMartin KaFai Lau3-74/+201
The current bpf_map_def is statically defined during compile time. This patch allows the *_user.c program to change it during runtime. It is done by adding load_bpf_file_fixup_map() which takes a callback. The callback will be called before creating each map so that it has a chance to modify the bpf_map_def. The current usecase is to change max_entries in map_perf_test. It is interesting to test with a much bigger map size in some cases (e.g. the following patch on bpf_lru_map.c). However, it is hard to find one size to fit all testing environment. Hence, it is handy to take the max_entries as a cmdline arg and then configure the bpf_map_def during runtime. This patch adds two cmdline args. One is to configure the map's max_entries. Another is to configure the max_cnt which controls how many times a syscall is called. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17bpf: lru: Refactor LRU map tests in map_perf_testMartin KaFai Lau2-29/+67
One more LRU test will be added later in this patch series. In this patch, we first move all existing LRU map tests into a single syscall (connect) first so that the future new LRU test can be added without hunting another syscall. One of the map name is also changed from percpu_lru_hash_map to nocommon_lru_hash_map to avoid the confusion with percpu_hash_map. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 17:52:21 +0000