summaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2019-07-12Merge tag 'kbuild-v5.3' of ↵Linus Torvalds2-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ...
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds47-648/+705
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09Merge tag 'media/v5.3-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Atmel microship ISC driver - coda has gained support for mpeg2 and mpeg4 - cxusb gained support for analog TV - rockchip staging driver was split into two separate staging drivers - added a new staging driver for Allegro DVT video IP core - added a new staging driver for Amlogic Meson video decoder - lots of improvements and cleanups * tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits) media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs media: doc-rst: Fix typos media: radio-raremono: change devm_k*alloc to k*alloc media: stv0297: fix frequency range limit media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes media: dvb_frontend: split dvb_frontend_handle_ioctl function media: mceusb: disable "nonsensical irdata" messages media: rc: remove redundant dev_err message media: cec-notifier: add new notifier functions media: cec: add struct cec_connector_info support media: cec-notifier: rename variables, check kstrdup and n->conn_name media: MAINTAINERS: Add maintainers for Media Controller media: staging: media: tegra-vde: Defer dmabuf's unmapping media: staging: media: tegra-vde: Add IOMMU support media: hdpvr: fix locking and a missing msleep media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom() media: atmel: atmel-isc: fix i386 build error media: v4l2-ctrl: Move compound control initialization media: hantro: Use vb2_get_buffer media: pci: cx88: Change the type of 'missed' to u64 ...
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Remove the unused per rq load array and all its infrastructure, by Dietmar Eggemann. - Add utilization clamping support by Patrick Bellasi. This is a refinement of the energy aware scheduling framework with support for boosting of interactive and capping of background workloads: to make sure critical GUI threads get maximum frequency ASAP, and to make sure background processing doesn't unnecessarily move to cpufreq governor to higher frequencies and less energy efficient CPU modes. - Add the bare minimum of tracepoints required for LISA EAS regression testing, by Qais Yousef - which allows automated testing of various power management features, including energy aware scheduling. - Restructure the former tsk_nr_cpus_allowed() facility that the -rt kernel used to modify the scheduler's CPU affinity logic such as migrate_disable() - introduce the task->cpus_ptr value instead of taking the address of &task->cpus_allowed directly - by Sebastian Andrzej Siewior. - Misc optimizations, fixes, cleanups and small enhancements - see the Git log for details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) sched/uclamp: Add uclamp support to energy_compute() sched/uclamp: Add uclamp_util_with() sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks sched/uclamp: Set default clamps for RT tasks sched/uclamp: Reset uclamp values on RESET_ON_FORK sched/uclamp: Extend sched_setattr() to support utilization clamping sched/core: Allow sched_setattr() to use the current policy sched/uclamp: Add system default clamps sched/uclamp: Enforce last task's UCLAMP_MAX sched/uclamp: Add bucket local max tracking sched/uclamp: Add CPU's clamp buckets refcounting sched/fair: Rename weighted_cpuload() to cpu_runnable_load() sched/debug: Export the newly added tracepoints sched/debug: Add sched_overutilized tracepoint sched/debug: Add new tracepoint to track PELT at se level sched/debug: Add new tracepoints to track PELT at rq level sched/debug: Add a new sched_trace_*() helper functions sched/autogroup: Make autogroup_path() always available sched/wait: Deduplicate code with do-while sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity() ...
2019-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller13-60/+377
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-07-03 The following pull-request contains BPF updates for your *net-next* tree. There is a minor merge conflict in mlx5 due to 8960b38932be ("linux/dim: Rename externally used net_dim members") which has been pulled into your tree in the meantime, but resolution seems not that bad ... getting current bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed just so he's aware of the resolution below: ** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD static int mlx5e_open_cq(struct mlx5e_channel *c, struct dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) ======= int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Resolution is to take the second chunk and rename net_dim_cq_moder into dim_cq_moder. Also the signature for mlx5e_open_cq() in ... drivers/net/ethernet/mellanox/mlx5/core/en.h +977 ... and in mlx5e_open_xsk() ... drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64 ... needs the same rename from net_dim_cq_moder into dim_cq_moder. ** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix)); struct dim_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; struct mlx5e_channel *c; unsigned int irq; ======= struct net_dim_cq_moder icocq_moder = {0, 0}; >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Take the second chunk and rename net_dim_cq_moder into dim_cq_moder as well. Let me know if you run into any issues. Anyway, the main changes are: 1) Long-awaited AF_XDP support for mlx5e driver, from Maxim. 2) Addition of two new per-cgroup BPF hooks for getsockopt and setsockopt along with a new sockopt program type which allows more fine-grained pass/reject settings for containers. Also add a sock_ops callback that can be selectively enabled on a per-socket basis and is executed for every RTT to help tracking TCP statistics, both features from Stanislav. 3) Follow-up fix from loops in precision tracking which was not propagating precision marks and as a result verifier assumed that some branches were not taken and therefore wrongly removed as dead code, from Alexei. 4) Fix BPF cgroup release synchronization race which could lead to a double-free if a leaf's cgroup_bpf object is released and a new BPF program is attached to the one of ancestor cgroups in parallel, from Roman. 5) Support for bulking XDP_TX on veth devices which improves performance in some cases by around 9%, from Toshiaki. 6) Allow for lookups into BPF devmap and improve feedback when calling into bpf_redirect_map() as lookup is now performed right away in the helper itself, from Toke. 7) Add support for fq's Earliest Departure Time to the Host Bandwidth Manager (HBM) sample BPF program, from Lawrence. 8) Various cleanups and minor fixes all over the place from many others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-1/+1
Daniel Borkmann says: ==================== pull-request: bpf 2019-07-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH on BE architectures, from Jiong. 2) Fix several bugs in the x32 BPF JIT for handling shifts by 0, from Luke and Xi. 3) Fix NULL pointer deref in btf_type_is_resolve_source_only(), from Stanislav. 4) Properly handle the check that forwarding is enabled on the device in bpf_ipv6_fib_lookup() helper code, from Anton. 5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit alignment such as m68k, from Baruch. 6) Fix kernel hanging in unregister_netdevice loop while unregistering device bound to XDP socket, from Ilya. 7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan. 8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri. 9) Fix bpftool to use correct argument in cgroup errors, from Jakub. 10) Fix detaching dummy prog in XDP redirect sample code, from Prashant. 11) Add Jonathan to AF_XDP reviewers, from Björn. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03samples/bpf: fix tcp_bpf.readme detach commandStanislav Fomichev1-1/+1
Copy-paste, should be detach, not attach. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03samples/bpf: add sample program that periodically dumps TCP statsStanislav Fomichev2-0/+69
Uses new RTT callback to dump stats every second. $ mkdir -p /tmp/cgroupv2 $ mount -t cgroup2 none /tmp/cgroupv2 $ mkdir -p /tmp/cgroupv2/foo $ echo $$ >> /tmp/cgroupv2/foo/cgroup.procs $ bpftool prog load ./tcp_dumpstats_kern.o /sys/fs/bpf/tcp_prog $ bpftool cgroup attach /tmp/cgroupv2/foo sock_ops pinned /sys/fs/bpf/tcp_prog $ bpftool prog tracelog $ # run neper/netperf/etc Used neper to compare performance with and without this program attached and didn't see any noticeable performance impact. Sample output: <idle>-0 [015] ..s. 2074.128800: 0: dsack_dups=0 delivered=242526 <idle>-0 [015] ..s. 2074.128808: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [015] ..s. 2075.130133: 0: dsack_dups=0 delivered=323599 <idle>-0 [015] ..s. 2075.130138: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [005] .Ns. 2076.131440: 0: dsack_dups=0 delivered=404648 <idle>-0 [005] .Ns. 2076.131447: 0: delivered_ce=0 icsk_retransmits=0 Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03bpf: Add support for fq's EDT to HBMbrakmo5-19/+231
Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth Manager). Includes a new BPF program supporting EDT, and also updates corresponding programs. It will drop packets with an EDT of more than 500us in the future unless the packet belongs to a flow with less than 2 packets in flight. This is done so each flow has at least 2 packets in flight, so they will not starve, and also to help prevent delayed ACK timeouts. It will also work with ECN enabled traffic, where the packets will be CE marked if their EDT is more than 50us in the future. The table below shows some performance numbers. The flows are back to back RPCS. One server sending to another, either 2 or 4 flows. One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more than one flow of a given RPC size, the numbers represent averages. The rate limit applies to all flows (they are in the same cgroup). Tests ending with "-edt" ran with the new BPF program supporting EDT. Tests ending with "-hbt" ran on top HBT qdisc with the specified rate (i.e. no HBM). The other tests ran with the HBM BPF program included in the HBM patch-set. EDT has limited value when using DCTCP, but it helps in many cases when using Cubic. It usually achieves larger link utilization and lower 99% latencies for the 1MB RPCs. HBM ends up queueing a lot of packets with its default parameter values, reducing the goodput of the 10KB RPCs and increasing their latency. Also, the RTTs seen by the flows are quite large. Aggr 10K 10K 10K 1MB 1MB 1MB Limit rate drops RTT rate P90 P99 rate P90 P99 Test rate Flows Mbps % us Mbps us us Mbps ms ms -------- ---- ----- ---- ----- --- ---- ---- ---- ---- ---- ---- cubic 1G 2 904 0.02 108 257 511 539 647 13.4 24.5 cubic-edt 1G 2 982 0.01 156 239 656 967 743 14.0 17.2 dctcp 1G 2 977 0.00 105 324 408 744 653 14.5 15.9 dctcp-edt 1G 2 981 0.01 142 321 417 811 660 15.7 17.0 cubic-htb 1G 2 919 0.00 1825 40 2822 4140 879 9.7 9.9 cubic 200M 2 155 0.30 220 81 532 655 74 283 450 cubic-edt 200M 2 188 0.02 222 87 1035 1095 101 84 85 dctcp 200M 2 188 0.03 111 77 912 939 111 76 325 dctcp-edt 200M 2 188 0.03 217 74 1416 1738 114 76 79 cubic-htb 200M 2 188 0.00 5015 8 14ms 15ms 180 48 50 cubic 1G 4 952 0.03 110 165 516 546 262 38 154 cubic-edt 1G 4 973 0.01 190 111 1034 1314 287 65 79 dctcp 1G 4 951 0.00 103 180 617 905 257 37 38 dctcp-edt 1G 4 967 0.00 163 151 732 1126 272 43 55 cubic-htb 1G 4 914 0.00 3249 13 7ms 8ms 300 29 34 cubic 5G 4 4236 0.00 134 305 490 624 1310 10 17 cubic-edt 5G 4 4865 0.00 156 306 425 759 1520 10 16 dctcp 5G 4 4936 0.00 128 485 221 409 1484 7 9 dctcp-edt 5G 4 4924 0.00 148 390 392 623 1508 11 26 v1 -> v2: Incorporated Andrii's suggestions v2 -> v3: Incorporated Yonghong's suggestions v3 -> v4: Removed credit update that is not needed Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-01samples: pktgen: allow to specify destination portDaniel T. Lee10-2/+95
Currently, kernel pktgen has the feature to specify udp destination port for sending packet. (e.g. pgset "udp_dst_min 9") But on samples, each of the scripts doesn't have any option to achieve this. This commit adds the DST_PORT option to specify the target port(s) in the script. -p : ($DST_PORT) destination PORT range (e.g. 433-444) is also allowed Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01samples: pktgen: add some helper functions for port parsingDaniel T. Lee1-0/+34
This commit adds port parsing and port validate helper function to parse single or range of port(s) from a given string. (e.g. 1234, 443-444) Helpers will be used in prior to set target port(s) in samples/pktgen. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+6
The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27xsk: Change the default frame size to 4096 and allow controlling itMaxim Mikityanskiy1-16/+28
The typical XDP memory scheme is one packet per page. Change the AF_XDP frame size in libbpf to 4096, which is the page size on x86, to allow libbpf to be used with the drivers with the packet-per-page scheme. Add a command line option -f to xdpsock to allow to specify a custom frame size. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-26samples: bpf: make the use of xdp samples consistentDaniel T. Lee4-12/+42
Currently, each xdp samples are inconsistent in the use. Most of the samples fetch the interface with it's name. (ex. xdp1, xdp2skb, xdp_redirect_cpu, xdp_sample_pkts, etc.) But some of the xdp samples are fetching the interface with ifindex by command argument. This commit enables xdp samples to fetch interface with it's name without changing the original index interface fetching. (<ifname|ifindex> fetching in the same way as xdp_sample_pkts_user.c does.) Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-24samples: bpf: Remove bpf_debug macro in favor of bpf_printkMichal Rostecki1-12/+6
ibumad example was implementing the bpf_debug macro which is exactly the same as the bpf_printk macro available in bpf_helpers.h. This change makes use of bpf_printk instead of bpf_debug. Signed-off-by: Michal Rostecki <mrostecki@opensuse.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into sched/core, to refresh the branchIngo Molnar8-20/+9
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24samples/bpf: xdp_redirect, correctly get dummy program idPrashant Bhole1-1/+1
When we terminate xdp_redirect, it ends up with following message: "Program on iface OUT changed, not removing" This results in dummy prog still attached to OUT interface. It is because signal handler checks if the programs are the same that we had attached. But while fetching dummy_prog_id, current code uses prog_fd instead of dummy_prog_fd. This patch passes the correct fd. Fixes: 3b7a8ec2dec3 ("samples/bpf: Check the prog id before exiting") Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-24samples: make pidfd-metadata fail gracefully on older kernelsDmitry V. Levin1-2/+6
Initialize pidfd to an invalid descriptor, to fail gracefully on those kernels that do not implement CLONE_PIDFD and leave pidfd unchanged. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-18/+7
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds6-18/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller16-31/+34
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-06-19 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin. 2) BTF based map definition, from Andrii. 3) support bpf_map_lookup_elem for xskmap, from Jonathan. 4) bounded loops and scalar precision logic in the verifier, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505Thomas Gleixner1-1/+2
Based on 1 normalized pattern(s): gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 58 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.556988620@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 465Thomas Gleixner4-12/+4
Based on 1 normalized pattern(s): released under the gpl version 2 only extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.506564860@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller10-89/+10
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-2/+2
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-18samples: bpf: refactor header include pathDaniel T. Lee15-20/+20
Currently, header inclusion in each file is inconsistent. For example, "libbpf.h" header is included as multiple ways. #include "bpf/libbpf.h" #include "libbpf.h" Due to commit b552d33c80a9 ("samples/bpf: fix include path in Makefile"), $(srctree)/tools/lib/bpf/ path had been included during build, path "bpf/" in header isn't necessary anymore. This commit removes path "bpf/" in header inclusion. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-18samples: bpf: remove unnecessary include options in MakefileDaniel T. Lee1-9/+0
Due to recent change of include path at commit b552d33c80a9 ("samples/bpf: fix include path in Makefile"), some of the previous include options became unnecessary. This commit removes duplicated include options in Makefile. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-17Merge tag 'v5.2-rc5' into sched/core, to pick up fixesIngo Molnar9-87/+12
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-15kbuild: add CONFIG_HEADERS_INSTALL and loosen the dependency of samplesMasahiro Yamada2-5/+13
Commit 5318321d367c ("samples: disable CONFIG_SAMPLES for UML") used a big hammer to fix the build errors under the samples/ directory. Only some samples actually include uapi headers from usr/include. Introduce CONFIG_HEADERS_INSTALL since 'depends on HEADERS_INSTALL' is clearer than 'depends on !UML'. If this option is enabled, uapi headers are installed before starting directory descending. I added 'depends on HEADERS_INSTALL' to per-sample CONFIG options. This allows UML to compile some samples. $ make ARCH=um allmodconfig samples/ [ snip ] CC [M] samples/configfs/configfs_sample.o CC [M] samples/kfifo/bytestream-example.o CC [M] samples/kfifo/dma-example.o CC [M] samples/kfifo/inttype-example.o CC [M] samples/kfifo/record-example.o CC [M] samples/kobject/kobject-example.o CC [M] samples/kobject/kset-example.o CC [M] samples/trace_events/trace-events-sample.o CC [M] samples/trace_printk/trace-printk.o AR samples/vfio-mdev/built-in.a AR samples/built-in.a Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15samples/bpf: fix include path in MakefilePrashant Bhole1-1/+1
Recent commit included libbpf.h in selftests/bpf/bpf_util.h. Since some samples use bpf_util.h and samples/bpf/Makefile doesn't have libbpf.h path included, build was failing. Let's add the path in samples/bpf/Makefile. Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-11Merge tag 'v5.2-rc4' into media/masterMauro Carvalho Chehab33-225/+36
There are some conflicts due to SPDX changes. We also have more patches being merged via media tree touching them. So, let's merge back from upstream and address those. Linux 5.2-rc4 * tag 'v5.2-rc4': (767 commits) Linux 5.2-rc4 MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ... Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-10samples: bpf: don't run probes at the local make stageJakub Kicinski1-0/+3
Quentin reports that commit 07c3bbdb1a9b ("samples: bpf: print a warning about headers_install") is producing the false positive when make is invoked locally, from the samples/bpf/ directory. When make is run locally it hits the "all" target, which will recursively invoke make through the full build system. Speed up the "local" run which doesn't actually build anything, and avoid false positives by skipping all the probes if not in kbuild environment (cover both the new warning and the BTF probes). Reported-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds8-87/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-2/+2
Daniel Borkmann says: ==================== pull-request: bpf 2019-06-07 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix several bugs in riscv64 JIT code emission which forgot to clear high 32-bits for alu32 ops, from Björn and Luke with selftests covering all relevant BPF alu ops from Björn and Jiong. 2) Two fixes for UDP BPF reuseport that avoid calling the program in case of __udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption that skb->data is pointing to transport header, from Martin. 3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog workqueue, and a missing restore of sk_write_space when psock gets dropped, from Jakub and John. 4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it breaks standard applications like DNS if reverse NAT is not performed upon receive, from Daniel. 5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6 fails to verify that the length of the tuple is long enough, from Lorenz. 6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for {un,}successful probe) as that is expected to be propagated as an fd to load_sk_storage_btf() and thus closing the wrong descriptor otherwise, from Michal. 7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir. 8) Minor misc fixes in docs, samples and selftests, from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller25-138/+28
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06samples: bpf: print a warning about headers_installJakub Kicinski1-0/+9
It seems like periodically someone posts patches to "fix" header includes. The issue is that samples expect the include path to have the uAPI headers (from usr/) first, and then tools/ headers, so that locally installed uAPI headers take precedence. This means that if users didn't run headers_install they will see all sort of strange compilation errors, e.g.: HOSTCC samples/bpf/test_lru_dist samples/bpf/test_lru_dist.c:39:8: error: redefinition of ‘struct list_head’ struct list_head { ^~~~~~~~~ In file included from samples/bpf/test_lru_dist.c:9:0: ../tools/include/linux/types.h:69:8: note: originally defined here struct list_head { ^~~~~~~~~ Try to detect this situation, and print a helpful warning. v2: just use HOSTCC (Jiong). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 290Thomas Gleixner5-60/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 39 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.397680977@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05samples: fix pidfd-metadata compilationGuenter Roeck1-0/+4
Define __NR_pidfd_send_signal if it isn't to prevent a compilation error. To make pidfd-metadata compile on all arches, irrespective of whether or not syscall numbers are assigned, define the syscall number to -1. If it isn't defined this will cause the kernel to return -ENOSYS. Fixes: 43c6afee48d4 ("samples: show race-free pidfd metadata access") Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Christian Brauner <christian@brauner.io> Signed-off-by: Guenter Roeck <linux@roeck-us.net> [christian@brauner.io: tweak commit message] Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-04bpf: hbm: fix spelling mistake "notifcations" -> "notificiations"Colin Ian King1-1/+1
There is a spelling mistake in the help information, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-03sched/core: Provide a pointer to the valid CPU maskSebastian Andrzej Siewior1-1/+1
In commit: 4b53a3412d66 ("sched/core: Remove the tsk_nr_cpus_allowed() wrapper") the tsk_nr_cpus_allowed() wrapper was removed. There was not much difference in !RT but in RT we used this to implement migrate_disable(). Within a migrate_disable() section the CPU mask is restricted to single CPU while the "normal" CPU mask remains untouched. As an alternative implementation Ingo suggested to use: struct task_struct { const cpumask_t *cpus_ptr; cpumask_t cpus_mask; }; with t->cpus_ptr = &t->cpus_mask; In -RT we then can switch the cpus_ptr to: t->cpus_ptr = &cpumask_of(task_cpu(p)); in a migration disabled region. The rules are simple: - Code that 'uses' ->cpus_allowed would use the pointer. - Code that 'modifies' ->cpus_allowed would use the direct mask. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190423142636.14347-1-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller18-559/+169
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-05-31 The following pull-request contains BPF updates for your *net-next* tree. Lots of exciting new features in the first PR of this developement cycle! The main changes are: 1) misc verifier improvements, from Alexei. 2) bpftool can now convert btf to valid C, from Andrii. 3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs. This feature greatly improves BPF speed on 32-bit architectures. From Jiong. 4) cgroups will now auto-detach bpf programs. This fixes issue of thousands bpf programs got stuck in dying cgroups. From Roman. 5) new bpf_send_signal() helper, from Yonghong. 6) cgroup inet skb programs can signal CN to the stack, from Lawrence. 7) miscellaneous cleanups, from many developers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31bpf: Add more stats to HBMbrakmo4-10/+117
Adds more stats to HBM, including average cwnd and rtt of all TCP flows, percents of packets that are ecn ce marked and distribution of return values. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-31bpf: Add cn support to hbm_out_kern.cbrakmo4-12/+45
Update hbm_out_kern.c to support returning cn notifications. Also updates relevant files to allow disabling cn notifications. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206Thomas Gleixner20-80/+20
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner3-43/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 145Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 021110 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 84 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100844.756442981@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>