summaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2018-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-23/+51
Pull networking updates from David Miller: 1) New ipset extensions for matching on destination MAC addresses, from Stefano Brivio. 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to nfp driver. From Stefano Brivio. 3) Implement GRO for plain UDP sockets, from Paolo Abeni. 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT bit so that we could support the entire vlan_tci value. 5) Rework the IPSEC policy lookups to better optimize more usecases, from Florian Westphal. 6) Infrastructure changes eliminating direct manipulation of SKB lists wherever possible, and to always use the appropriate SKB list helpers. This work is still ongoing... 7) Lots of PHY driver and state machine improvements and simplifications, from Heiner Kallweit. 8) Various TSO deferral refinements, from Eric Dumazet. 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov. 10) Batch dropping of XDP packets in tuntap, from Jason Wang. 11) Lots of cleanups and improvements to the r8169 driver from Heiner Kallweit, including support for ->xmit_more. This driver has been getting some much needed love since he started working on it. 12) Lots of new forwarding selftests from Petr Machata. 13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel. 14) Packed ring support for virtio, from Tiwei Bie. 15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov. 16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu. 17) Implement coalescing on TCP backlog queue, from Eric Dumazet. 18) Implement carrier change in tun driver, from Nicolas Dichtel. 19) Support msg_zerocopy in UDP, from Willem de Bruijn. 20) Significantly improve garbage collection of neighbor objects when the table has many PERMANENT entries, from David Ahern. 21) Remove egdev usage from nfp and mlx5, and remove the facility completely from the tree as it no longer has any users. From Oz Shlomo and others. 22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and therefore abort the operation before the commit phase (which is the NETDEV_CHANGEADDR event). From Petr Machata. 23) Add indirect call wrappers to avoid retpoline overhead, and use them in the GRO code paths. From Paolo Abeni. 24) Add support for netlink FDB get operations, from Roopa Prabhu. 25) Support bloom filter in mlxsw driver, from Nir Dotan. 26) Add SKB extension infrastructure. This consolidates the handling of the auxiliary SKB data used by IPSEC and bridge netfilter, and is designed to support the needs to MPTCP which could be integrated in the future. 27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits) net: dccp: fix kernel crash on module load drivers/net: appletalk/cops: remove redundant if statement and mask bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw net/net_namespace: Check the return value of register_pernet_subsys() net/netlink_compat: Fix a missing check of nla_parse_nested ieee802154: lowpan_header_create check must check daddr net/mlx4_core: drop useless LIST_HEAD mlxsw: spectrum: drop useless LIST_HEAD net/mlx5e: drop useless LIST_HEAD iptunnel: Set tun_flags in the iptunnel_metadata_reply from src net/mlx5e: fix semicolon.cocci warnings staging: octeon: fix build failure with XFRM enabled net: Revert recent Spectre-v1 patches. can: af_can: Fix Spectre v1 vulnerability packet: validate address length if non-zero nfc: af_nfc: Fix Spectre v1 vulnerability phonet: af_phonet: Fix Spectre v1 vulnerability net: core: Fix Spectre v1 vulnerability net: minor cleanup in skb_ext_add() net: drop the unused helper skb_ext_get() ...
2018-12-03samples: bpf: fix: seg fault with NULL pointer argDaniel T. Lee1-1/+3
When NULL pointer accidentally passed to write_kprobe_events, due to strlen(NULL), segmentation fault happens. Changed code returns -1 to deal with this situation. Bug issued with Smatch, static analysis. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-03media: v4l2-pci-skeleton: replace vb2_buffer with vb2_v4l2_bufferMichael Tretter1-5/+6
Commit 2d7007153f0c ("[media] media: videobuf2: Restructure vb2_buffer") replaced vb2_buffer with vb2_v4l2_buffer in all v4l2 drivers. The restructuring skipped the v4l2-pci-skeleton, probably because it resides outside the drivers directory. The v4l2_buf_ops assume that the passed buffer is a vb2_v4l2_buffer. This is not the case if the skel_buffer is based on vb2_buffer instead of vb2_v4l2_buffer. Replace vb2_buffer with vb2_v4l2_buffer in the skeleton to make sure that future drivers that are based on the skeleton use vb2_v4l2_buffer. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-30samples: bpf: get ifindex from ifnameMatteo Croce1-2/+7
Find the ifindex with if_nametoindex() instead of requiring the numeric ifindex. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-30samples: bpf: improve xdp1 exampleMatteo Croce1-10/+8
Store only the total packet count for every protocol, instead of the whole per-cpu array. Use bpf_map_get_next_key() to iterate the map, instead of looking up all the protocols. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-23samples: bpf: fix: error handling regarding kprobe_eventsDaniel T. Lee1-9/+24
Currently, kprobe_events failure won't be handled properly. Due to calling system() indirectly to write to kprobe_events, it can't be identified whether an error is derived from kprobe or system. // buf = "echo '%c:%s %s' >> /s/k/d/t/kprobe_events" err = system(buf); if (err < 0) { printf("failed to create kprobe .."); return -1; } For example, running ./tracex7 sample in ext4 partition, "echo p:open_ctree open_ctree >> /s/k/d/t/kprobe_events" gets 256 error code system() failure. => The error comes from kprobe, but it's not handled correctly. According to man of system(3), it's return value just passes the termination status of the child shell rather than treating the error as -1. (don't care success) Which means, currently it's not working as desired. (According to the upper code snippet) ex) running ./tracex7 with ext4 env. # Current Output sh: echo: I/O error failed to open event open_ctree # Desired Output failed to create kprobe 'open_ctree' error 'No such file or directory' The problem is, error can't be verified whether from child ps or system. But using write() directly can verify the command failure, and it will treat all error as -1. So I suggest using write() directly to 'kprobe_events' rather than calling system(). Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-20tools/bpf: do not use pahole if clang/llvm can generate BTF sectionsYonghong Song1-0/+8
Add additional checks in tools/testing/selftests/bpf and samples/bpf such that if clang/llvm compiler can generate BTF sections, do not use pahole. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-07bpf_load: add map name to load_maps error messageShannon Nelson1-2/+2
To help when debugging bpf/xdp load issues, have the load_map() error message include the number and name of the map that failed. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-31Merge tag 'vfio-v4.20-rc1.v2' of git://github.com/awilliam/linux-vfioLinus Torvalds1-19/+117
Pull VFIO updates from Alex Williamson: - EDID interfaces for vfio devices supporting display extensions (Gerd Hoffmann) - Generically select Type-1 IOMMU model support on ARM/ARM64 (Geert Uytterhoeven) - Quirk for VFs reporting INTx pin (Alex Williamson) - Fix error path memory leak in MSI support (Li Qiang) * tag 'vfio-v4.20-rc1.v2' of git://github.com/awilliam/linux-vfio: vfio: add edid support to mbochs sample driver vfio: add edid api for display (vgpu) devices. drivers/vfio: Allow type-1 IOMMU instantiation with all ARM/ARM64 IOMMUs vfio/pci: Mask buggy SR-IOV VF INTx support vfio/pci: Fix potential memory leak in vfio_msi_cap_len
2018-10-26Merge tag 'char-misc-4.20-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc patches for 4.20-rc1. Loads of things here, we have new code in all of these driver subsystems: - fpga - stm - extcon - nvmem - eeprom - hyper-v - gsmi - coresight - thunderbolt - vmw_balloon - goldfish - soundwire along with lots of fixes and minor changes to other small drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (245 commits) Documentation/security-bugs: Clarify treatment of embargoed information lib: Fix ia64 bootloader linkage MAINTAINERS: Clarify UIO vs UIOVEC maintainer docs/uio: fix a grammar nitpick docs: fpga: document programming fpgas using regions fpga: add devm_fpga_region_create fpga: bridge: add devm_fpga_bridge_create fpga: mgr: add devm_fpga_mgr_create hv_balloon: Replace spin_is_locked() with lockdep sgi-xp: Replace spin_is_locked() with lockdep eeprom: New ee1004 driver for DDR4 memory eeprom: at25: remove unneeded 'at25_remove' w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size). misc: mic: scif: remove set but not used variables 'src_dma_addr, dst_dma_addr' misc: mic: fix a DMA pool free failure platform: goldfish: pipe: Add a blank line to separate varibles and code platform: goldfish: pipe: Remove redundant casting platform: goldfish: pipe: Call misc_deregister if init fails platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state ...
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11vfio: add edid support to mbochs sample driverGerd Hoffmann1-19/+117
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-11samples: disable CONFIG_SAMPLES for UMLMasahiro Yamada1-0/+1
Some samples require headers installation, so commit 3fca1700c4c3 ("kbuild: make samples really depend on headers_install") added such dependency in the top Makefile. However, UML fails to build with CONFIG_SAMPLES=y because UML does not support headers_install. Fixes: 3fca1700c4c3 ("kbuild: make samples really depend on headers_install") Reported-by: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-04bpf, tracex3_user: erase "ARRAY_SIZE" redefinedBo YU1-2/+0
There is a warning when compiling bpf sample programs in sample/bpf: make -C /home/foo/bpf/samples/bpf/../../tools/lib/bpf/ RM='rm -rf' LDFLAGS= srctree=/home/foo/bpf/samples/bpf/../../ O= HOSTCC /home/foo/bpf/samples/bpf/tracex3_user.o /home/foo/bpf/samples/bpf/tracex3_user.c:20:0: warning: "ARRAY_SIZE" redefined #define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x))) In file included from /home/foo/bpf/samples/bpf/tracex3_user.c:18:0: ./tools/testing/selftests/bpf/bpf_util.h:48:0: note: this is the location of the previous definition # define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-02mei: samples: fix a signedness bug in amt_host_if_call()Dan Carpenter1-1/+1
"out_buf_sz" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-01samples/bpf: extend test_cgrp2_attach2 test to use per-cpu cgroup storageRoman Gushchin1-1/+18
This commit extends the test_cgrp2_attach2 test to cover per-cpu cgroup storage. Bpf program will use shared and per-cpu cgroup storages simultaneously, so a better coverage of corresponding core code will be achieved. Expected output: $ ./test_cgrp2_attach2 Attached DROP prog. This ping in cgroup /foo should fail... ping: sendmsg: Operation not permitted Attached DROP prog. This ping in cgroup /foo/bar should fail... ping: sendmsg: Operation not permitted Attached PASS prog. This ping in cgroup /foo/bar should pass... Detached PASS from /foo/bar while DROP is attached to /foo. This ping in cgroup /foo/bar should fail... ping: sendmsg: Operation not permitted Attached PASS from /foo/bar and detached DROP from /foo. This ping in cgroup /foo/bar should pass... ### override:PASS ### multi:PASS Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-21samples/bpf: fix compilation failurePrashant Bhole3-11/+12
following commit: commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") added struct bpf_flow_keys which conflicts with the struct with same name in sockex2_kern.c and sockex3_kern.c similar to commit: commit 534e0e52bc23 ("samples/bpf: fix a compilation failure") we tried the rename it "flow_keys" but it also conflicted with struct having same name in include/net/flow_dissector.h. Hence renaming the struct to "flow_key_record". Also, this commit doesn't fix the compilation error completely because the similar struct is present in sockex3_kern.c. Hence renaming it in both files sockex3_user.c and sockex3_kern.c Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-18samples/bpf: fix a compilation failureYonghong Song1-2/+2
samples/bpf build failed with the following errors: $ make samples/bpf/ ... HOSTCC samples/bpf/sockex3_user.o /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:16:8: error: redefinition of ‘struct bpf_flow_keys’ struct bpf_flow_keys { ^ In file included from /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:4:0: ./usr/include/linux/bpf.h:2338:9: note: originally defined here struct bpf_flow_keys *flow_keys; ^ make[3]: *** [samples/bpf/sockex3_user.o] Error 1 Commit d58e468b1112d ("flow_dissector: implements flow dissector BPF hook") introduced struct bpf_flow_keys in include/uapi/linux/bpf.h and hence caused the naming conflict with samples/bpf/sockex3_user.c. The fix is to rename struct bpf_flow_keys in samples/bpf/sockex3_user.c to flow_keys to avoid the conflict. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-18samples/bpf: remove duplicated includesYueHaibing3-3/+0
Remove duplicated includes. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-01samples/bpf: xdpsock, minor fixesPrashant Bhole2-3/+2
- xsks_map size was fixed to 4, changed it MAX_SOCKS - Remove redundant definition of MAX_SOCKS in xdpsock_user.c - In dump_stats(), add NULL check for xsks[i] Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-01bpf: add TCP_SAVE_SYN/TCP_SAVED_SYN sample programNikita V. Shirokov2-0/+88
Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example: bpf program which is doing TOS/TCLASS reflection (server would reply with a same TOS/TCLASS as client). Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-29samples/bpf: add -c/--copy -z/--zero-copy flags to xdpsockBjörn Töpel1-1/+11
The -c/--copy -z/--zero-copy flags enforces either copy or zero-copy mode. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-16samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERMJesper Dangaard Brouer2-2/+4
It is common XDP practice to unload/deattach the XDP bpf program, when the XDP sample program is Ctrl-C interrupted (SIGINT) or killed (SIGTERM). The samples/bpf programs xdp_redirect_cpu and xdp_rxq_info, forgot to trap signal SIGTERM (which is the default signal used by the kill command). This was discovered by Red Hat QA, which automated scripts depend on killing the XDP sample program after a timeout period. Fixes: fad3917e361b ("samples/bpf: add cpumap sample program xdp_redirect_cpu") Fixes: 0fca931a6f21 ("samples/bpf: program demonstrating access to xdp_rxq_info") Reported-by: Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds13-34/+590
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-08-15Merge tag 'kbuild-v4.19' of ↵Linus Torvalds2-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - verify depmod is installed before modules_install - support build salt in case build ids must be unique between builds - allow users to specify additional host compiler flags via HOST*FLAGS, and rename internal variables to KBUILD_HOST*FLAGS - update buildtar script to drop vax support, add arm64 support - update builddeb script for better debarch support - document the pit-fall of if_changed usage - fix parallel build of UML with O= option - make 'samples' target depend on headers_install to fix build errors - remove deprecated host-progs variable - add a new coccinelle script for refcount_t vs atomic_t check - improve double-test coccinelle script - misc cleanups and fixes * tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) coccicheck: return proper error code on fail Coccinelle: doubletest: reduce side effect false positives kbuild: remove deprecated host-progs variable kbuild: make samples really depend on headers_install um: clean up archheaders recipe kbuild: add %asm-generic to no-dot-config-targets um: fix parallel building with O= option scripts: Add Python 3 support to tracing/draw_functrace.py builddeb: Add automatic support for sh{3,4}{,eb} architectures builddeb: Add automatic support for riscv* architectures builddeb: Add automatic support for m68k architecture builddeb: Add automatic support for or1k architecture builddeb: Add automatic support for sparc64 architecture builddeb: Add automatic support for mips{,64}r6{,el} architectures builddeb: Add automatic support for mips64el architecture builddeb: Add automatic support for ppc64 and powerpcspe architectures builddeb: Introduce functions to simplify kconfig tests in set_debarch builddeb: Drop check for 32-bit s390 builddeb: Change architecture detection fallback to use dpkg-architecture builddeb: Skip architecture detection when KBUILD_DEBARCH is set ...
2018-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller3-2/+160
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-13 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add driver XDP support for veth. This can be used in conjunction with redirect of another XDP program e.g. sitting on NIC so the xdp_frame can be forwarded to the peer veth directly without modification, from Toshiaki. 2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT in order to provide more control and visibility on where a SO_REUSEPORT sk should be located, and the latter enables to directly select a sk from the bpf map. This also enables map-in-map for application migration use cases, from Martin. 3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id of cgroup v2 that is the ancestor of the cgroup associated with the skb at the ancestor_level, from Andrey. 4) Implement BPF fs map pretty-print support based on BTF data for regular hash table and LRU map, from Yonghong. 5) Decouple the ability to attach BTF for a map from the key and value pretty-printer in BPF fs, and enable further support of BTF for maps for percpu and LPM trie, from Daniel. 6) Implement a better BPF sample of using XDP's CPU redirect feature for load balancing SKB processing to remote CPU. The sample implements the same XDP load balancing as Suricata does which is symmetric hash based on IP and L4 protocol, from Jesper. 7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s critical path as it is ensured that the allocator is present, from Björn. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+3
2018-08-10samples/bpf: xdp_redirect_cpu load balance like SuricataJesper Dangaard Brouer2-2/+105
This implement XDP CPU redirection load-balancing across available CPUs, based on the hashing IP-pairs + L4-protocol. This equivalent to xdp-cpu-redirect feature in Suricata, which is inspired by the Suricata 'ippair' hashing code. An important property is that the hashing is flow symmetric, meaning that if the source and destination gets swapped then the selected CPU will remain the same. This is helps locality by placing both directions of a flows on the same CPU, in a forwarding/routing scenario. The hashing INITVAL (15485863 the 10^6th prime number) was fairly arbitrary choosen, but experiments with kernel tree pktgen scripts (pktgen_sample04_many_flows.sh +pktgen_sample05_flow_per_thread.sh) showed this improved the distribution. This patch also change the default loaded XDP program to be this load-balancer. As based on different user feedback, this seems to be the expected behavior of the sample xdp_redirect_cpu. Link: https://github.com/OISF/suricata/commit/796ec08dd7a63 Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10samples/bpf: add Paul Hsieh's (LGPL 2.1) hash function SuperFastHashJesper Dangaard Brouer1-0/+55
Adjusted function call API to take an initval. This allow the API user to set the initial value, as a seed. This could also be used for inputting the previous hash. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-09samples/bpf: xdp_redirect_cpu adjustment to reproduce teardown race easierJesper Dangaard Brouer2-3/+3
The teardown race in cpumap is really hard to reproduce. These changes makes it easier to reproduce, for QA. The --stress-mode now have a case of a very small queue size of 8, that helps to trigger teardown flush to encounter a full queue, which results in calling xdp_return_frame API, in a non-NAPI protect context. Also increase MAX_CPUS, as my QA department have larger machines than me. Tested-by: Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03samples/bpf: extend test_cgrp2_attach2 test to use cgroup storageRoman Gushchin1-1/+20
The test_cgrp2_attach test covers bpf cgroup attachment code well, so let's re-use it for testing allocation/releasing of cgroup storage. The extension is pretty straightforward: the bpf program will use the cgroup storage to save the number of transmitted bytes. Expected output: $ ./test_cgrp2_attach2 Attached DROP prog. This ping in cgroup /foo should fail... ping: sendmsg: Operation not permitted Attached DROP prog. This ping in cgroup /foo/bar should fail... ping: sendmsg: Operation not permitted Attached PASS prog. This ping in cgroup /foo/bar should pass... Detached PASS from /foo/bar while DROP is attached to /foo. This ping in cgroup /foo/bar should fail... ping: sendmsg: Operation not permitted Attached PASS from /foo/bar and detached DROP from /foo. This ping in cgroup /foo/bar should pass... ### override:PASS ### multi:PASS Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27samples: bpf: convert xdpsock_user.c to libbpfJakub Kicinski2-10/+30
Convert xdpsock_user.c to use libbpf instead of bpf_load.o. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27samples: bpf: convert xdp_fwd_user.c to libbpfJakub Kicinski2-12/+24
Convert xdp_fwd_user.c to use libbpf instead of bpf_load.o. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27samples/bpf: Add BTF build flags to MakefileTaeung Song1-1/+16
To smoothly test BTF supported binary on samples/bpf, let samples/bpf/Makefile probe llc, pahole and llvm-objcopy for BPF support and use them like tools/testing/selftests/bpf/Makefile changed from the commit c0fa1b6c3efc ("bpf: btf: Add BTF tests"). Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27samples/bpf: xdpsock: order memory on AArch64Brian Brooks1-0/+5
Define u_smp_rmb() and u_smp_wmb() to respective barrier instructions. This ensures the processor will order accesses to queue indices against accesses to queue ring entries. Signed-off-by: Brian Brooks <brian.brooks@linaro.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2-1/+4
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-20 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add sharing of BPF objects within one ASIC: this allows for reuse of the same program on multiple ports of a device, and therefore gains better code store utilization. On top of that, this now also enables sharing of maps between programs attached to different ports of a device, from Jakub. 2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature detections and unused variable exports, also from Jakub. 3) First batch of RCU annotation fixes in prog array handling, i.e. there are several __rcu markers which are not correct as well as some of the RCU handling, from Roman. 4) Two fixes in BPF sample files related to checking of the prog_cnt upper limit from sample loader, from Dan. 5) Minor cleanup in sockmap to remove a set but not used variable, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller7-28/+104
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds6-16/+93
Pull networking fixes from David Miller: "Lots of fixes, here goes: 1) NULL deref in qtnfmac, from Gustavo A. R. Silva. 2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih. 3) Lost completion messages in AF_XDP, from Magnus Karlsson. 4) Correct bogus self-assignment in rhashtable, from Rishabh Bhatnagar. 5) Fix regression in ipv6 route append handling, from David Ahern. 6) Fix masking in __set_phy_supported(), from Heiner Kallweit. 7) Missing module owner set in x_tables icmp, from Florian Westphal. 8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire. 9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy. 10) Fix NULL deref when using chains in act_csum, from Davide Caratti. 11) XDP_REDIRECT needs to check if the interface is up and whether the MTU is sufficient. From Toshiaki Makita. 12) Net diag can do a double free when killing TCP_NEW_SYN_RECV connections, from Lorenzo Colitti. 13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a full minute, delaying device unregister. From Eric Dumazet. 14) Update MAC entries in the correct order in ixgbe, from Alexander Duyck. 15) Don't leave partial mangles bpf program in jit_subprogs, from Daniel Borkmann. 16) Fix pfmemalloc SKB state propagation, from Stefano Brivio. 17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng. 18) Use after free in tun XDP_TX, from Toshiaki Makita. 19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole. 20) Don't reuse remainder of RX page when XDP is set in mlx4, from Saeed Mahameed. 21) Fix window probe handling of TCP rapair sockets, from Stefan Baranoff. 22) Missing socket locking in smc_ioctl(), from Ursula Braun. 23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann. 24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva. 25) Two spots in ipv6 do a rol32() on a hash value but ignore the result. Fixes from Colin Ian King" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits) tcp: identify cryptic messages as TCP seq # bugs ptp: fix missing break in switch hv_netvsc: Fix napi reschedule while receive completion is busy MAINTAINERS: Drop inactive Vitaly Bordug's email net: cavium: Add fine-granular dependencies on PCI net: qca_spi: Fix log level if probe fails net: qca_spi: Make sure the QCA7000 reset is triggered net: qca_spi: Avoid packet drop during initial sync ipv6: fix useless rol32 call on hash ipv6: sr: fix useless rol32 call on hash net: sched: Using NULL instead of plain integer net: usb: asix: replace mii_nway_restart in resume path net: cxgb3_main: fix potential Spectre v1 lib/rhashtable: consider param->min_size when setting initial table size net/smc: reset recv timeout after clc handshake net/smc: add error handling for get_user() net/smc: optimize consumer cursor updates net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL. ipv6: ila: select CONFIG_DST_CACHE net: usb: rtl8150: demote allmulti message to dev_dbg() ...
2018-07-18kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBSLaura Abbott2-9/+9
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename existing usage to HOSTLDLIBS for consistency. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGSLaura Abbott1-5/+5
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to KBUILD_HOSTCFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-16samples/bpf: test_cgrp2_sock2: fix an off by oneDan Carpenter1-1/+1
"prog_cnt" is the number of elements which are filled out in prog_fd[] so the test should be >= instead of >. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-16samples: bpf: ensure that we don't load over MAX_PROGS programsDan Carpenter1-0/+3
I can't see that we check prog_cnt to ensure it doesn't go over MAX_PROGS. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-14samples/bpf: xdp_redirect_cpu handle parsing of double VLAN tagged packetsJesper Dangaard Brouer1-1/+10
People noticed that the code match on IEEE 802.1ad (ETH_P_8021AD) ethertype, and this implies Q-in-Q or double tagged VLANs. Thus, we better parse the next VLAN header too. It is even marked as a TODO. This is relevant for real world use-cases, as XDP cpumap redirect can be used when the NIC RSS hashing is broken. E.g. the ixgbe driver HW cannot handle double tagged VLAN packets, and places everything into a single RX queue. Using cpumap redirect, users can redistribute traffic across CPUs to solve this, which is faster than the network stacks RPS solution. It is left as an exerise how to distribute the packets across CPUs. It would be convenient to use the RX hash, but that is not _yet_ exposed to XDP programs. For now, users can code their own hash, as I've demonstrated in the Suricata code (where Q-in-Q is handled correctly). Reported-by: Florian Maury <florian.maury-cv@x-cli.eu> Reported-by: Marek Majkowski <marek@cloudflare.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-11sample: vfio-mdev: avoid deadlock in mdev_access()Alexey Khoroshilov1-1/+3
mdev_access() calls mbochs_get_page() with mdev_state->ops_lock held, while mbochs_get_page() locks the mutex by itself. It leads to unavoidable deadlock. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-10samples/bpf: Fix tc and ip paths in xdp2skb_meta.shTaeung Song1-3/+3
The below path error can occur: # ./xdp2skb_meta.sh --dev eth0 --list ./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory So just use command names instead of absolute paths of tc and ip. In addition, it allow callers to redefine $TC and $IP paths Fixes: 36e04a2d78d9 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB") Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-06Merge tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds1-11/+8
Pull VFIO fixes from Alex Williamson: - Make vfio-pci IGD extensions optional via Kconfig (Alex Williamson) - Remove unused and soon to be removed map_atomic callback from mbochs sample driver, add unmap callback to avoid dmabuf leaks (Gerd Hoffmann) - Fix usage of get_user_pages_longterm() (Jason Gunthorpe) - Fix sample mbochs driver vm_operations_struct.fault return type (Souptick Joarder) * tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio: sample/vfio-mdev: Change return type to vm_fault_t vfio: Use get_user_pages_longterm correctly sample/mdev/mbochs: add mbochs_kunmap_dmabuf sample/mdev/mbochs: remove mbochs_kmap_atomic_dmabuf vfio/pci: Make IGD support a configurable option
2018-07-05samples/bpf: add .gitignore fileTaeung Song1-0/+49
For untracked executables of samples/bpf, add this. Untracked files: (use "git add <file>..." to include in what will be committed) samples/bpf/cpustat samples/bpf/fds_example samples/bpf/lathist samples/bpf/load_sock_ops ... Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the error of write() and read()Taeung Song1-4/+15
test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the result of system()Taeung Song1-3/+24
To avoid the below build warning message, use new generate_load() checking the return value. ignoring return value of ‘system’, declared with attribute warn_unused_result And it also refactors the duplicate code of both test_perf_event_all_cpu() and test_perf_event_task() Cc: Teng Qin <qinteng@fb.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: add missing <linux/if_vlan.h>Taeung Song1-5/+1
This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>