| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit f1b5618e013a ("vfs: Add a sample program for the new mount API")
added sample programs that get built during the kernel build, but then
cause 'git status' to worry about whether the resulting binaries should
be managed by git.
Tell git not to worry, and to ignore the sample binaries.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ignore the pidfd-metadata binary so it doesn't show up in unwanted
scenarios.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
Pull rdma updates from Jason Gunthorpe:
"This has been a smaller cycle than normal. One new driver was
accepted, which is unusual, and at least one more driver remains in
review on the list.
Summary:
- Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4,
vmw_pvrdma
- Many patches from MatthewW converting radix tree and IDR users to
use xarray
- Introduction of tracepoints to the MAD layer
- Build large SGLs at the start for DMA mapping and get the driver to
split them
- Generally clean SGL handling code throughout the subsystem
- Support for restricting RDMA devices to net namespaces for
containers
- Progress to remove object allocation boilerplate code from drivers
- Change in how the mlx5 driver shows representor ports linked to VFs
- mlx5 uapi feature to access the on chip SW ICM memory
- Add a new driver for 'EFA'. This is HW that supports user space
packet processing through QPs in Amazon's cloud"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits)
RDMA/ipoib: Allow user space differentiate between valid dev_port
IB/core, ipoib: Do not overreact to SM LID change event
RDMA/device: Don't fire uevent before device is fully initialized
lib/scatterlist: Remove leftover from sg_page_iter comment
RDMA/efa: Add driver to Kconfig/Makefile
RDMA/efa: Add the efa module
RDMA/efa: Add EFA verbs implementation
RDMA/efa: Add common command handlers
RDMA/efa: Implement functions that submit and complete admin commands
RDMA/efa: Add the ABI definitions
RDMA/efa: Add the com service API definitions
RDMA/efa: Add the efa_com.h file
RDMA/efa: Add the efa.h header file
RDMA/efa: Add EFA device definitions
RDMA: Add EFA related definitions
RDMA/umem: Remove hugetlb flag
RDMA/bnxt_re: Use core helpers to get aligned DMA address
RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size
RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks
RDMA/umem: Add API to find best driver supported page size in an MR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
* tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
.gitignore: add more all*.config patterns
moduleparam: Save information about built-in modules in separate file
Remove MODULE_ALIAS() calls that take undefined macro
.gitignore: add leading and trailing slashes to generated directories
scripts/tags.sh: fix direct execution of scripts/tags.sh
scripts: override locale from environment when running recordmcount.pl
samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y
samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option
kbuild: move Documentation to vmlinux-alldirs
kbuild: move samples/ to KBUILD_VMLINUX_OBJS
modpost: make KBUILD_MODPOST_WARN also configurable for external modules
kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
kbuild: remove unneeded dependency for include/config/kernel.release
memory: squash drivers/memory/Makefile.asm-offsets
kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
kbuild: mkmakefile: generate a simple wrapper of top Makefile
kbuild: mkmakefile: do not check the generated Makefile marker
kbuild: allow Kbuild to start from any directory
kbuild: pass $(MAKECMDGOALS) to sub-make as is
kbuild: fix warning "overriding recipe for target 'Makefile'"
...
|
|
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount ABI updates from Al Viro:
"The syscalls themselves, finally.
That's not all there is to that stuff, but switching individual
filesystems to new methods is fortunately independent from everything
else, so e.g. NFS series can go through NFS tree, etc.
As those conversions get done, we'll be finally able to get rid of a
bunch of duplication in fs/super.c introduced in the beginning of the
entire thing. I expect that to be finished in the next window..."
* 'work.mount-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Add a sample program for the new mount API
vfs: syscall: Add fspick() to select a superblock for reconfiguration
vfs: syscall: Add fsmount() to create a mount for a superblock
vfs: syscall: Add fsconfig() for configuring and managing a context
vfs: Implement logging through fs_context
vfs: syscall: Add fsopen() to prepare for superblock creation
Make anon_inodes unconditional
teach move_mount(2) to work with OPEN_TREE_CLONE
vfs: syscall: Add move_mount(2) to move mounts around
vfs: syscall: Add open_tree(2) to reference or clone a mount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core/kobject updates from Greg KH:
"Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said
they should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here,
due to some changes to the kobject core code. Those too have all been
acked by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
kobject: clean up the kobject add documentation a bit more
kobject: Fix kernel-doc comment first line
kobject: Remove docstring reference to kset
firmware_loader: Fix a typo ("syfs" -> "sysfs")
kobject: fix dereference before null check on kobj
Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
init/config: Do not select BUILD_BIN2C for IKCONFIG
Provide in-kernel headers to make extending kernel easier
kobject: Improve doc clarity kobject_init_and_add()
kobject: Improve docs for kobject_add/del
driver core: platform: Fix the usage of platform device name(pdev->name)
livepatch: Replace klp_ktype_patch's default_attrs with groups
cpufreq: schedutil: Replace default_attrs field with groups
padata: Replace padata_attr_type default_attrs field with groups
irqdesc: Replace irq_kobj_type's default_attrs field with groups
net-sysfs: Replace ktype default_attrs field with groups
block: Replace all ktype default_attrs with groups
samples/kobject: Replace foo_ktype's default_attrs field with groups
kobject: Add support for default attribute groups to kobj_type
driver core: Postpone DMA tear-down until after devres release for probe failure
...
|
|
This is a sample program showing userspace how to get race-free access
to process metadata from a pidfd. It is rather easy to do and userspace
can actually simply reuse code that currently parses a process's status
file in procfs.
The program can easily be extended into a generic helper suitable for
inclusion in a libc to make it even easier for userspace to gain metadata
access.
Since this came up in a discussion because this API is going to be used
in various service managers: A lot of programs will have a whitelist
seccomp filter that returns <some-errno> for all new syscalls. This
means that programs might get confused if CLONE_PIDFD works but the
later pidfd_send_signal() syscall doesn't. Hence, here's a ahead of
time check that pidfd_send_signal() is supported:
bool pidfd_send_signal_supported()
{
int procfd = open("/proc/self", O_DIRECTORY | O_RDONLY | O_CLOEXEC);
if (procfd < 0)
return false;
/*
* A process is always allowed to signal itself so
* pidfd_send_signal() should never fail this test. If it does
* it must mean it is not available, blocked by an LSM, seccomp,
* or other.
*/
return pidfd_send_signal(procfd, 0, NULL, 0) == 0;
}
Signed-off-by: Christian Brauner <christian@brauner.io>
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
|
|
This sample works well as builtin.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The prompt of CONFIG_SAMPLE_SECCOMP claims this is "loadable module
only", which is invalid.
samples/seccomp/ only contains host programs, so having it tristate
is pointless.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Handle samples/ like the other top-level directories to simplify
the Makefile.
Include include/config/auto.conf earlier to evaluate
drivers-$(CONFIG_SAMPLES).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
This commit adds hbm to .gitignore which is
currently ommited from the ignore file.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace foo_ktype's default_attrs field with
default_groups and use the ATTRIBUTE_GROUPS macro to create
foo_default_groups.
This patch was tested by loading the kset-example module and verifying
that the sysfs files for the attributes in the default group were
created.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
clang started to error on invalid asm clobber usage in x86 headers
and many bpf program samples failed to build with the message:
CLANG-bpf /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.o
In file included from /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.c:14:
In file included from ../include/linux/in.h:23:
In file included from ../include/uapi/linux/in.h:24:
In file included from ../include/linux/socket.h:8:
In file included from ../include/linux/uio.h:14:
In file included from ../include/crypto/hash.h:16:
In file included from ../include/linux/crypto.h:26:
In file included from ../include/linux/uaccess.h:5:
In file included from ../include/linux/sched.h:15:
In file included from ../include/linux/sem.h:5:
In file included from ../include/uapi/linux/sem.h:5:
In file included from ../include/linux/ipc.h:9:
In file included from ../include/linux/refcount.h:72:
../arch/x86/include/asm/refcount.h:72:36: error: asm-specifier for input or output variable conflicts with asm clobber list
r->refs.counter, e, "er", i, "cx");
^
../arch/x86/include/asm/refcount.h:86:27: error: asm-specifier for input or output variable conflicts with asm clobber list
r->refs.counter, e, "cx");
^
2 errors generated.
Override volatile() to workaround the problem.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Since, ksym_search added with verification logic for symbols existence,
it could return NULL when the kernel symbols are not loaded.
This commit will add NULL check logic after ksym_search.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Provide a count of class types for a summary of MAD packets. The example
shows one way to filter the trace data based on management class.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This commit adds xdp_sample_pkts to .gitignore which is
currently ommited from the ignore file.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a sample program to demonstrate fsopen/fsmount/move_mount to mount
something.
To make it compile on all arches, irrespective of whether or not syscall
numbers are assigned, define the syscall number to -1 if it isn't to cause
the kernel to return -ENOSYS.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull networking fixes from David Miller:
"First batch of fixes in the new merge window:
1) Double dst_cache free in act_tunnel_key, from Wenxu.
2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
ip_route_input_rcu() path, from Paolo Abeni.
3) Fix appletalk compile regression, from Arnd Bergmann.
4) If SLAB objects reach the TCP sendpage method we are in serious
trouble, so put a debugging check there. From Vasily Averin.
5) Memory leak in hsr layer, from Mao Wenan.
6) Only test GSO type on GSO packets, from Willem de Bruijn.
7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.
8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.
9) Fix race in ipv4 route exception handling, from Xin Long.
10) Missing DMA memory barrier in hns3 driver, from Jian Shen.
11) Use after free in __tcf_chain_put(), from Vlad Buslov.
12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.
13) Return value correction when ip_mc_may_pull() fails, from Eric
Dumazet.
14) Use after free in x25_device_event(), also from Eric"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
gro_cells: make sure device is up in gro_cells_receive()
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
net/x25: fix use-after-free in x25_device_event()
isdn: mISDNinfineon: fix potential NULL pointer dereference
net: hns3: fix to stop multiple HNS reset due to the AER changes
ip: fix ip_mc_may_pull() return value
net: keep refcount warning in reqsk_free()
net: stmmac: Avoid one more sometimes uninitialized Clang warning
net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
rxrpc: Fix client call queueing, waiting for channel
tcp: handle inet_csk_reqsk_queue_add() failures
net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
fou, fou6: avoid uninit-value in gue_err() and gue6_err()
net: sched: fix potential use-after-free in __tcf_chain_put()
vhost: silence an unused-variable warning
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
connector: fix unsafe usage of ->real_parent
vxlan: do not need BH again in vxlan_cleanup()
net: hns3: add dma_rmb() for rx description
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- remove sensor drivers that got converted from soc_camera
- remaining soc_camera drivers got moved to staging
- some documentation cleanups and improvements
- the imx staging driver now supports imx7
- the ov9640, mt9m001 and mt9m111 got converted from soc_camera
- the vim2m driver now does what a m2m convert driver expects to do
- epoll() fixes on media subsystems
- several drivers fixes, typos, cleanups and improvements
* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
media: dvb/earth-pt1: fix wrong initialization for demod blocks
media: vim2m: Address some coding style issues
media: vim2m: don't use BUG()
media: vim2m: speedup passthrough copy
media: vim2m: add an horizontal scaler
media: vim2m: don't accept YUYV anymore as output format
media: vim2m: add vertical linear scaler
media: vim2m: better handle cap/out buffers with different sizes
media: vim2m: use different framesizes for bayer formats
media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
media: vim2m: ensure that width is multiple of two
media: vim2m: improve debug messages
media: vim2m: add bayer capture formats
media: a few more typos at staging, pci, platform, radio and usb
media: Documentation: fix several typos
media: staging: fix several typos
media: include: fix several typos
media: common: fix several typos
media: v4l2-core: fix several typos
media: usb: fix several typos
...
|
|
Pull documentation updates from Jonathan Corbet:
"A fairly routine cycle for docs - lots of typo fixes, some new
documents, and more translations. There's also some LICENSES
adjustments from Thomas"
* tag 'docs-5.1' of git://git.lwn.net/linux: (74 commits)
docs: Bring some order to filesystem documentation
Documentation/locking/lockdep: Drop last two chars of sample states
doc: rcu: Suspicious RCU usage is a warning
docs: driver-api: iio: fix errors in documentation
Documentation/process/howto: Update for 4.x -> 5.x versioning
docs: Explicitly state that the 'Fixes:' tag shouldn't split lines
doc: security: Add kern-doc for lsm_hooks.h
doc: sctp: Merge and clean up rst files
Docs: Correct /proc/stat path
scripts/spdxcheck.py: fix C++ comment style detection
doc: fix typos in license-rules.rst
Documentation: fix admin-guide/README.rst minimum gcc version requirement
doc: process: complete removal of info about -git patches
doc: translations: sync translations 'remove info about -git patches'
perf-security: wrap paragraphs on 72 columns
perf-security: elaborate on perf_events/Perf privileged users
perf-security: document collected perf_events/Perf data categories
perf-security: document perf_events/Perf resource control
sysfs.txt: add note on available attribute macros
docs: kernel-doc: typo "if ... if" -> "if ... is"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina:
- support for something we call 'atomic replace', and allows for much
better handling of cumulative patches (which is something very useful
for distros), from Jason Baron with help of Petr Mladek and Joe
Lawrence
- improvement of handling of tasks blocking finalization, from Miroslav
Benes
- update of MAINTAINERS file to reflect move towards group
maintainership
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
livepatch/selftests: use "$@" to preserve argument list
livepatch: Module coming and going callbacks can proceed with all listed patches
livepatch: Proper error handling in the shadow variables selftest
livepatch: return -ENOMEM on ptr_id() allocation failure
livepatch: Introduce klp_for_each_patch macro
livepatch: core: Return EOPNOTSUPP instead of ENOSYS
selftests/livepatch: add DYNAMIC_DEBUG config dependency
livepatch: samples: non static warnings fix
livepatch: update MAINTAINERS
livepatch: Remove signal sysfs attribute
livepatch: Send a fake signal periodically
selftests/livepatch: introduce tests
livepatch: Remove ordering (stacking) of the livepatches
livepatch: Atomic replace and cumulative patches documentation
livepatch: Remove Nop structures when unused
livepatch: Add atomic replace
livepatch: Use lists to manage patches, objects and functions
livepatch: Simplify API by removing registration step
livepatch: Don't block the removal of patches loaded after a forced transition
livepatch: Consolidate klp_free functions
...
|
|
Remove duplicate headers which are included more than once
Link: http://lkml.kernel.org/r/20190114170033.GA3674@hp-pavilion-15-notebook-pc-brajeswar
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are a couple of typos, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Pull networking updates from David Miller:
"Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
range without dealing with floods of ARP traffic, from Linus
Lüssing.
2) Throttle buffered multicast packet transmission in mt76, from
Felix Fietkau.
3) Support adaptive interrupt moderation in ice, from Brett Creeley.
4) A lot of struct_size conversions, from Gustavo A. R. Silva.
5) Add peek/push/pop commands to bpftool, as well as bash completion,
from Stanislav Fomichev.
6) Optimize sk_msg_clone(), from Vakul Garg.
7) Add SO_BINDTOIFINDEX, from David Herrmann.
8) Be more conservative with local resends due to local congestion,
from Yuchung Cheng.
9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.
10) Add health buffer support to devlink, from Eran Ben Elisha.
11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.
12) Add statistics to basic packet scheduler filter, from Cong Wang.
13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.
14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.
15) Add 3ad stats to bonding, from Nikolay Aleksandrov.
16) Lots of probing improvements for bpftool, from Quentin Monnet.
17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.
18) Allow #ebpf programs to access gso_segs from skb shared info, from
Eric Dumazet.
19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.
20) Support 22260 iwlwifi devices, from Luca Coelho.
21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.
22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.
23) Add spinlock support to #ebpf, from Alexei Starovoitov.
24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.
25) Add device infomation API to devlink, from Jakub Kicinski.
26) Add new timestamping socket options which are y2038 safe, from
Deepa Dinamani.
27) Add RX checksum offloading for various sh_eth chips, from Sergei
Shtylyov.
28) Flow offload infrastructure, from Pablo Neira Ayuso.
29) Numerous cleanups, improvements, and bug fixes to the PHY layer
and many drivers from Heiner Kallweit.
30) Lots of changes to try and make packet scheduler classifiers run
lockless as much as possible, from Vlad Buslov.
31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.
32) Add concurrency tests to tc-tests infrastructure, from Vlad
Buslov.
33) Add hwmon support to aquantia, from Heiner Kallweit.
34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.
And I would be remiss if I didn't thank the various major networking
subsystem maintainers for integrating much of this work before I even
saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
Johannes Berg, Kalle Valo, and many others. Thank you!"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
net/sched: avoid unused-label warning
net: ignore sysctl_devconf_inherit_init_net without SYSCTL
phy: mdio-mux: fix Kconfig dependencies
net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
selftest/net: Remove duplicate header
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
net/mlx5e: Update tx reporter status in case channels were successfully opened
devlink: Add support for direct reporter health state update
devlink: Update reporter state to error even if recover aborted
sctp: call iov_iter_revert() after sending ABORT
team: Free BPF filter when unregistering netdev
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
cxgb4/chtls: Prefix adapter flags with CXGB4
net-sysfs: Switch to bitmap_zalloc()
mellanox: Switch to bitmap_zalloc()
bpf: add test cases for non-pointer sanitiation logic
mlxsw: i2c: Extend initialization by querying resources data
...
|
|
Document change towards group maintainership of livepatching code
samples/ warning fix from Nicholas Mc Guire
|
|
Pull VFIO updates from Alex Williamson:
- Switch mdev to generic UUID API (Andy Shevchenko)
- Fixup platform reset include paths (Masahiro Yamada)
- Fix usage of MINORMASK (Chengguang Xu)
- Remove noise from duplicate spapr table unsets (Alexey Kardashevskiy)
- Restore device state after PM reset (Alex Williamson)
- Ensure memory translation enabled for PCI ROM access (Eric Auger)
* tag 'vfio-v5.1-rc1' of git://github.com/awilliam/linux-vfio:
vfio_pci: Enable memory accesses before calling pci_map_rom
vfio/pci: Restore device state on PM transition
vfio/spapr_tce: Skip unsetting already unset table
samples/vfio-mdev/mtty: expand minor range when registering chrdev region
samples/vfio-mdev/mdpy: expand minor range when registering chrdev region
samples/vfio-mdev/mbochs: expand minor range when registering chrdev region
vfio: expand minor range when registering chrdev region
vfio: platform: reset: fix up include directives to remove ccflags-y
vfio-mdev: Switch to use new generic UUID API
|
|
Script for testing HBM (Host Bandwidth Manager) framework.
It creates a cgroup to use for testing and load a BPF program to limit
egress bandwidht. It then uses iperf3 or netperf to create
loads. The output is the goodput in Mbps (unless -D is used).
It can work on a single host using loopback or among two hosts (with netperf).
When using loopback, it is recommended to also introduce a delay of at least
1ms (-d=1), otherwise the assigned bandwidth is likely to be underutilized.
USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>] [-D]
[-d=<delay>|--delay=<delay>] [--debug] [-E]
[-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >] [-l]
[-N] [-p=<port>|--port=<port>] [-P] [-q=<qdisc>]
[-R] [-s=<server>|--server=<server] [--stats]
[-t=<time>|--time=<time>] [-w] [cubic|dctcp]
Where:
out Egress (default egress)
-b or --bpf BPF program filename to load and attach.
Default is nrm_out_kern.o for egress,
-c or -cc TCP congestion control (cubic or dctcp)
-d or --delay Add a delay in ms using netem
-D In addition to the goodput in Mbps, it also outputs
other detailed information. This information is
test dependent (i.e. iperf3 or netperf).
--debug Print BPF trace buffer
-E Enable ECN (not required for dctcp)
-f or --flows Number of concurrent flows (default=1)
-i or --id cgroup id (an integer, default is 1)
-l Do not limit flows using loopback
-N Use netperf instead of iperf3
-h Help
-p or --port iperf3 port (default is 5201)
-P Use an iperf3 instance for each flow
-q Use the specified qdisc.
-r or --rate Rate in Mbps (default 1s 1Gbps)
-R Use TCP_RR for netperf. 1st flow has req
size of 10KB, rest of 1MB. Reply in all
cases is 1 byte.
More detailed output for each flow can be found
in the files netperf.<cg>.<flow>, where <cg> is the
cgroup id as specified with the -i flag, and <flow>
is the flow id starting at 1 and increasing by 1 for
flow (as specified by -f).
-s or --server hostname of netperf server. Used to create netperf
test traffic between to hosts (default is within host)
netserver must be running on the host.
--stats Get HBM stats (marked, dropped, etc.)
-t or --time duration of iperf3 in seconds (default=5)
-w Work conserving flag. cgroup can increase its
bandwidth beyond the rate limit specified
while there is available bandwidth. Current
implementation assumes there is only one NIC
(eth0), but can be extended to support multiple
NICs. This is just a proof of concept.
cubic or dctcp specify TCP CC to use
Examples:
./do_hbm_test.sh -l -d=1 -D --stats
Runs a 5 second test, using a single iperf3 flow and with the default
rate limit of 1Gbps and a delay of 1ms (using netem) using the default
TCP congestion control on the loopback device (hence we use "-l" to
enforce bandwidth limit on loopback device). Since no direction is
specified, it defaults to egress. Since no TCP CC algorithm is
specified it uses the system default (Cubic for this test).
With no -D flag, only the value of the AGGREGATE OUTPUT would show.
id refers to the cgroup id and is useful when running multi cgroup
tests (supported by a future patch).
This patchset does not support calling TCP's congesion window
reduction, even when packets are dropped by the BPF program, resulting
in a large number of packets dropped. It is recommended that the current
HBM implemenation only be used with ECN enabled flows. A future patch
will add support for reducing TCP's cwnd and will increase the
performance of non-ECN enabled flows.
Output:
Details for HBM in cgroup 1
id:1
rate_mbps:493
duration:4.8 secs
packets:11355
bytes_MB:590
pkts_dropped:4497
bytes_dropped_MB:292
pkts_marked_percent: 39.60
bytes_marked_percent: 49.49
pkts_dropped_percent: 39.60
bytes_dropped_percent: 49.49
PING AVG DELAY:2.075
AGGREGATE_GOODPUT:505
./do_nrm_test.sh -l -d=1 -D --stats dctcp
Same as above but using dctcp. Note that fewer bytes are dropped
(0.01% vs. 49%).
Output:
Details for HBM in cgroup 1
id:1
rate_mbps:945
duration:4.9 secs
packets:16859
bytes_MB:578
pkts_dropped:1
bytes_dropped_MB:0
pkts_marked_percent: 28.74
bytes_marked_percent: 45.15
pkts_dropped_percent: 0.01
bytes_dropped_percent: 0.01
PING AVG DELAY:2.083
AGGREGATE_GOODPUT:965
./do_nrm_test.sh -d=1 -D --stats
As first example, but without limiting loopback device (i.e. no
"-l" flag). Since there is no bandwidth limiting, no details for
HBM are printed out.
Output:
Details for HBM in cgroup 1
PING AVG DELAY:2.019
AGGREGATE_GOODPUT:42655
./do_hbm.sh -l -d=1 -D --stats -f=2
Uses iper3 and does 2 flows
./do_hbm.sh -l -d=1 -D --stats -f=4 -P
Uses iperf3 and does 4 flows, each flow as a separate process.
./do_hbm.sh -l -d=1 -D --stats -f=4 -N
Uses netperf, 4 flows
./do_hbm.sh -f=1 -r=2000 -t=5 -N -D --stats dctcp -s=<server-name>
Uses netperf between two hosts. The remote host name is specified
with -s= and you need to start the program netserver manually on
the remote host. It will use 1 flow, a rate limit of 2Gbps and dctcp.
./do_hbm.sh -f=1 -r=2000 -t=5 -N -D --stats -w dctcp \
-s=<server-name>
As previous, but allows use of extra bandwidth. For this test the
rate is 8Gbps vs. 1Gbps of the previous test.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing HBM (Host Bandwidth Manager) for egress traffic.
One still needs to create network traffic. This can be done through
netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.
USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
[-w] [-h] [prog]
Where:
-d Print BPF trace debug buffer
-l Also limit flows doing loopback
-n <#> To create cgroup "/hbm#" and attach prog. Default is /nrm1
This is convenient when testing HBM in more than 1 cgroup
-r <rate> Rate limit in Mbps
-s Get HBM stats (marked, dropped, etc.)
-t <time> Exit after specified seconds (deault is 0)
-w Work conserving flag. cgroup can increase its bandwidth
beyond the rate limit specified while there is available
bandwidth. Current implementation assumes there is only
NIC (eth0), but can be extended to support multiple NICs.
Currrently only supported for egress. Note, this is just
a proof of concept.
-h Print this info
prog BPF program file name. Name defaults to hbm_out_kern.o
More information about HBM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A cgroup skb BPF program to limit cgroup output bandwidth.
It uses a modified virtual token bucket queue to limit average
egress bandwidth. The implementation uses credits instead of tokens.
Negative credits imply that queueing would have happened (this is
a virtual queue, so no queueing is done by it. However, queueing may
occur at the actual qdisc (which is not used for rate limiting).
This implementation uses 3 thresholds, one to start marking packets and
the other two to drop packets:
CREDIT
- <--------------------------|------------------------> +
| | | 0
| Large pkt |
| drop thresh |
Small pkt drop Mark threshold
thresh
The effect of marking depends on the type of packet:
a) If the packet is ECN enabled, then the packet is ECN ce marked.
The current mark threshold is tuned for DCTCP.
c) Else, it is dropped if it is a large packet.
If the credit is below the drop threshold, the packet is dropped.
Note that dropping a packet through the BPF program does not trigger CWR
(Congestion Window Reduction) in TCP packets. A future patch will add
support for triggering CWR.
This BPF program actually uses 2 drop thresholds, one threshold
for larger packets (>= 120 bytes) and another for smaller packets. This
protects smaller packets such as SYNs, ACKs, etc.
The default bandwidth limit is set at 1Gbps but this can be changed by
a user program through a shared BPF map. In addition, by default this BPF
program does not limit connections using loopback. This behavior can be
overwritten by the user program. There is also an option to calculate
some statistics, such as percent of packets marked or dropped, which
the user program can access.
A latter patch provides such a program (hbm.c)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compiling xdpsock_user.c with 4.8.5, I hit the following
compilation warning:
HOSTCC samples/bpf/xdpsock_user.o
/data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c: In function ‘main’:
/data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:449:6: warning: ‘idx_cq’ may be used unini
tialized in this function [-Wmaybe-uninitialized]
u32 idx_cq, idx_fq;
^
/data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:606:7: warning: ‘idx_rx’ may be used unini
tialized in this function [-Wmaybe-uninitialized]
u32 idx_rx, idx_tx = 0;
^
/data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:506:6: warning: ‘idx_rx’ may be used unini
tialized in this function [-Wmaybe-uninitialized]
u32 idx_rx, idx_fq = 0;
As an example, the code pattern looks like:
u32 idx_cq;
...
ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
if (ret) {
...
}
... idx_fq ...
The compiler warns since it does not know whether &idx_fq is assigned
or not inside the library function xsk_ring_prod__reserve().
Let us assign an initial value 0 to such auto variables to silence
compiler warning.
Fixes: 248c7f9c0e21 ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Some samples don't really need the magic of bpf_load,
switch them to libbpf.
v2: - specify program types.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpftool can do all the things load_sock_ops used to do, and more.
Point users to bpftool instead of maintaining this sample utility.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
ping localhost may default of IPv6 on modern systems, but
samples are trying to only parse IPv4. Force IPv4.
samples/bpf/tracex1_user.c doesn't interpret the packet so
we don't care which IP version will be used there.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, running sample "task_fd_query" and "tracex3" occurs the
following error. On kernel v5.0-rc* this sample will be unavailable
due to the removal of function 'blk_start_request' at commit "a1ce35f".
(function removed, as "Single Queue IO scheduler" no longer exists)
$ sudo ./task_fd_query
failed to create kprobe 'blk_start_request' error 'No such file or
directory'
This commit will change the function 'blk_start_request' to
'blk_mq_start_request' to fix the broken sample.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This commit converts the xdpsock sample application to use the AF_XDP
functions present in libbpf. This cuts down the size of it by nearly
300 lines of code.
The default ring sizes plus the batch size has been increased and the
size of the umem area has decreased. This so that the sample application
will provide higher throughput. Note also that the shared umem code
has been removed from the sample as this is not supported by libbpf
at this point in time.
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The xdp_redirect and xdp_redirect_map sample programs both load a dummy
program onto the egress interfaces. However, the unload code checks these
programs against the wrong id number, and thus refuses to unload them. Fix
the comparison to avoid this.
Fixes: 3b7a8ec2dec3 ("samples/bpf: Check the prog id before exiting")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Linux 5.0-rc7
* tag 'v5.0-rc7': (1667 commits)
Linux 5.0-rc7
Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
Input: st-keyscan - fix potential zalloc NULL dereference
Input: apanel - switch to using brightness_set_blocking()
powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()
efi/arm: Revert "Defer persistent reservations until after paging_init()"
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
Compiler Attributes: add support for __copy (gcc >= 9)
lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure
auxdisplay: ht16k33: fix potential user-after-free on module unload
x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
i2c: cadence: Fix the hold bit setting
drm: Use array_size() when creating lease
dm thin: fix bug where bio that overwrites thin block ignores FUA
Revert "exec: load_script: don't blindly truncate shebang string"
Revert "gfs2: read journal in large chunks to locate the head"
net: ethernet: freescale: set FEC ethtool regs version
...
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Actually, total amount of available minor number
for a single major is MINORMARK + 1. So expand
minor range when registering chrdev region.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Actually, total amount of available minor number
for a single major is MINORMARK + 1. So expand
minor range when registering chrdev region.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Actually, total amount of available minor number
for a single major is MINORMARK + 1. So expand
minor range when registering chrdev region.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.
Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Check the program id within the signal handler on polling xdp samples
that were previously converted to libbpf usage. Avoid the situation of
unloading the program that was not attached by sample that is exiting.
Handle also the case where bpf_get_link_xdp_id didn't exit with an error
but the xdp program was not found on an interface.
Reported-by: Michal Papaj <michal.papaj@intel.com>
Reported-by: Jakub Spizewski <jakub.spizewski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Make xdp samples consistent with iproute2 behavior and set the
XDP_FLAGS_UPDATE_IF_NOEXIST by default when setting the xdp program on
interface. Provide an option for user to force the program loading,
which as a result will not include the mentioned flag in
bpf_set_link_xdp_fd call.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There is a common problem with xdp samples that happens when user wants
to run a particular sample and some bpf program is already loaded. The
default 64kb RLIMIT_MEMLOCK resource limit will cause a following error
(assuming that xdp sample that is failing was converted to libbpf
usage):
libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
Couldn't load basic 'r0 = 0' BPF program.
libbpf: failed to load object './xdp_sample_pkts_kern.o'
Fix it in xdp_sample_pkts and xdp_router_ipv4 by setting RLIMIT_MEMLOCK
to RLIM_INFINITY.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Some of XDP samples that are attaching the bpf program to the interface
via libbpf's bpf_set_link_xdp_fd are still using the bpf_load.c for
loading and manipulating the ebpf program and maps. Convert them to do
this through libbpf usage and remove bpf_load from the picture.
While at it remove what looks like debug leftover in
xdp_redirect_map_user.c
In xdp_redirect_cpu, change the way that the program to be loaded onto
interface is chosen - user now needs to pass the program's section name
instead of the relative number. In case of typo print out the section
names to choose from.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The sample xdp_redirect_cpu is not using helper bpf_trace_printk.
Thus it makes no sense that the --debug option us reading
from /sys/kernel/debug/tracing/trace_pipe via read_trace_pipe.
Simply remove it.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The device was moved from misc device to character devices
to support multiple mei devices.
Cc: <stable@vger.kernel.org> #v4.9+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-01-29
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Teach verifier dead code removal, this also allows for optimizing /
removing conditional branches around dead code and to shrink the
resulting image. Code store constrained architectures like nfp would
have hard time doing this at JIT level, from Jakub.
2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
code generation for 32-bit sub-registers. Evaluation shows that this
can result in code reduction of ~5-20% compared to 64 bit-only code
generation. Also add implementation for most JITs, from Jiong.
3) Add support for __int128 types in BTF which is also needed for
vmlinux's BTF conversion to work, from Yonghong.
4) Add a new command to bpftool in order to dump a list of BPF-related
parameters from the system or for a specific network device e.g. in
terms of available prog/map types or helper functions, from Quentin.
5) Add AF_XDP sock_diag interface for querying sockets from user
space which provides information about the RX/TX/fill/completion
rings, umem, memory usage etc, from Björn.
6) Add skb context access for skb_shared_info->gso_segs field, from Eric.
7) Add support for testing flow dissector BPF programs by extending
existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.
8) Split BPF kselftest's test_verifier into various subgroups of tests
in order better deal with merge conflicts in this area, from Jakub.
9) Add support for queue/stack manipulations in bpftool, from Stanislav.
10) Document BTF, from Yonghong.
11) Dump supported ELF section names in libbpf on program load
failure, from Taeung.
12) Silence a false positive compiler warning in verifier's BTF
handling, from Peter.
13) Fix help string in bpftool's feature probing, from Prashant.
14) Remove duplicate includes in BPF kselftests, from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
