summaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-16Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - AMD SFH (Sensor Fusion Hub) support (Sandeep Singh) - increase of maximum HID report size to 16KB in order to support some of the modern devices (Dean Camera) - control interface support for hidraw (Dean Camera) - Sony DS4 power and firmware reporting fixes (Roderick Colenbrander) - support for ghlive PS3/WII U dongles (Pascal Giard) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits) HID: i2c-hid: add Vero K147 to descriptor override HID: ite: Add support for Acer S1002 keyboard-dock HID: sony: support for ghlive ps3/wii u dongles HID: hidraw: Add additional hidraw input/output report ioctls. HID: Increase HID maximum report size to 16KB HID: elecom: drop stray comment HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse HID: elecom: rewrite report based on model specific parameters HID: wacom: Constify attribute_groups HID: input: Fix fall-through warnings for Clang HID: usbhid: Fix fall-through warnings for Clang HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse HID: intel-ish-hid: Remove unnecessary assignment to variable rv HID: sony: Workaround for DS4 dongle hotplug kernel crash. HID: sony: Don't use fw_version/hw_version for sysfs cleanup. HID: sony: Report more accurate DS4 power status. SFH: fix error return check for -ERESTARTSYS HID: SFH: Add documentation HID: hid-input: occasionally report stylus battery even if not changed ...
2020-12-16Merge branch 'for-5.11/elecom' into for-linusJiri Kosina43-2853/+2149
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma
2020-12-10samples/bpf: Fix possible hang in xdpsock with multiple threadsMagnus Karlsson1-0/+2
Fix a possible hang in xdpsock that can occur when using multiple threads. In this case, one or more of the threads might get stuck in the while-loop in tx_only after the user has signaled the main thread to stop execution. In this case, no more Tx packets will be sent, so a thread might get stuck in the aforementioned while-loop. Fix this by introducing a test inside the while-loop to check if the benchmark has been terminated. If so, return from the function. Fixes: cd9e72b6f210 ("samples/bpf: xdpsock: Add option to specify batch size") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201210163407.22066-1-magnus.karlsson@gmail.com
2020-12-09Merge tag 'qcom-drivers-for-5.11' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.11 This adds support for the core power domains on MSM8916, MSM8939, SDM660 and SDX55. It adds SM8150 support to the last-level cache controller driver and it makes it possible to build the Command DB and RPMh drivers as modules. It also contains a slew of smaller cleanups, style and bug fixes throughout the various drivers. * tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits) soc: qcom: rpmhpd: Add SDX55 power domains dt-bindings: power: Add rpm power domain bindings for sdx55 soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write() samples: qmi: Constify static qmi ops soc: qcom: pdr: Constify static qmi structs soc: qcom: initialize local variable soc: qcom: socinfo: add soc ids for msm8953 variants soc: qcom: geni: Remove "iova" check soc: qcom: llcc: Add configuration data for SM8150 dt-bindings: msm: Add LLCC for SM8150 soc: qcom: rpmh: Fix possible doc-rot in rpmh_write()'s header soc: qcom: kryo-l2-accessors: Fix misnaming of 'val' soc: qcom: rpmhpd: Provide some missing struct member descriptions soc: qcom: llcc-qcom: Fix expected kernel-doc formatting soc: qcom: smp2p: Remove unused struct attribute provide another soc: qcom: wcnss_ctrl: Demote non-conformant struct header and fix function headers soc: qcom: smsm: Fix some kernel-doc formatting and naming problems soc: qcom: smem: Fix formatting and missing documentation issues soc: qcom: qcom-geni-se: Fix misnamed function parameter 'rx_rfr' soc: qcom: qcom_aoss: Add missing description for 'cooling_devs' ... Link: https://lore.kernel.org/r/20201130190142.345246-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski43-1070/+739
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-0/+4
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03samples/bpf: Fix spelling mistake "recieving" -> "receiving"Colin Ian King1-1/+1
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201203114452.1060017-1-colin.king@canonical.com
2020-12-03samples/bpf: Sample application for eBPF load and socket creation splitMariusz Dudek4-6/+337
Introduce a sample program to demonstrate the control and data plane split. For the control plane part a new program called xdpsock_ctrl_proc is introduced. For the data plane part, some code was added to xdpsock_user.c to act as the data plane entity. Application xdpsock_ctrl_proc works as control entity with sudo privileges (CAP_SYS_ADMIN and CAP_NET_ADMIN are sufficient) and the extended xdpsock as data plane entity with CAP_NET_RAW capability only. Usage example: sudo ./samples/bpf/xdpsock_ctrl_proc -i <interface> sudo ./samples/bpf/xdpsock -i <interface> -q <queue_id> -n <interval> -N -l -R Signed-off-by: Mariusz Dudek <mariuszx.dudek@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201203090546.11976-3-mariuszx.dudek@intel.com
2020-12-02bpf: samples: Do not touch RLIMIT_MEMLOCKRoman Gushchin27-133/+0
Since bpf is not using rlimit memlock for the memory accounting and control, do not change the limit in sample applications. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201201215900.3569844-35-guro@fb.com
2020-12-01Merge tag 'trace-v5.10-rc6' of ↵Linus Torvalds3-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Use correct timestamp variable for ring buffer write stamp update - Fix up before stamp and write stamp when crossing ring buffer sub buffers - Keep a zero delta in ring buffer in slow path if cmpxchg fails - Fix trace_printk static buffer for archs that care - Fix ftrace record accounting for ftrace ops with trampolines - Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency - Remove WARN_ON in hwlat tracer that triggers on something that is OK - Make "my_tramp" trampoline in ftrace direct sample code global - Fixes in the bootconfig tool for better alignment management * tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Always check to put back before stamp when crossing pages ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency ftrace: Fix updating FTRACE_FL_TRAMP tracing: Fix alignment of static buffer tracing: Remove WARN_ON in start_thread() samples/ftrace: Mark my_tramp[12]? global ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next() ring-buffer: Update write stamp with the correct ts docs: bootconfig: Update file format on initrd image tools/bootconfig: Align the bootconfig applied initrd image size to 4 tools/bootconfig: Fix to check the write failure correctly tools/bootconfig: Fix errno reference after printf()
2020-11-30samples/ftrace: Mark my_tramp[12]? globalSami Tolvanen3-0/+4
my_tramp[12]? are declared as global functions in C, but they are not marked global in the inline assembly definition. This mismatch confuses Clang's Control-Flow Integrity checking. Fix the definitions by adding .globl. Link: https://lkml.kernel.org/r/20201113183414.1446671-1-samitolvanen@google.com Fixes: 9d907f1ae80b8 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-12-01samples/bpf: Add option to set the busy-poll budgetBjörn Töpel1-0/+5
Support for the SO_BUSY_POLL_BUDGET setsockopt, via the batching option ('b'). Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-11-bjorn.topel@gmail.com
2020-12-01samples/bpf: Add busy-poll support to xdpsockBjörn Töpel1-7/+33
Add a new option to xdpsock, 'B', for busy-polling. This option will also set the batching size, 'b' option, to the busy-poll budget. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-10-bjorn.topel@gmail.com
2020-12-01samples/bpf: Use recvfrom() in xdpsock/l2fwdBjörn Töpel1-14/+12
Start using recvfrom() the l2fwd scenario, instead of poll() which is more expensive and need additional knobs for busy-polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-9-bjorn.topel@gmail.com
2020-12-01samples/bpf: Use recvfrom() in xdpsock/rxdropBjörn Töpel1-4/+4
Start using recvfrom() the rxdrop scenario. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-8-bjorn.topel@gmail.com
2020-11-27HID: hidraw: Add additional hidraw input/output report ioctls.Dean Camera1-1/+1
Currently the hidraw module can only read and write feature HID reports on demand, via dedicated ioctls. Input reports are read from the device through the read() interface, while output reports are written through the write interface(). This is insufficient; it is desirable in many situations to be able to read and write input and output reports through the control interface to cover additional scenarios: - Reading an input report by its report ID, to get initial state - Writing an input report, to set initial input state in the device - Reading an output report by its report ID, to obtain current state - Writing an output report by its report ID, out of band This patch adds these missing ioctl requests to read and write the remaining HID report types. Note that not all HID backends will neccesarily support this (e.g. while the USB link layer supports setting Input reports, others may not). Also included are documentation and example updates. The current hidraw documentation states that feature reports read from the device does *not* include the report ID, however this is not the case and the returned report will have its report ID prepended by conforming HID devices, as the report data sent from the device over the control endpoint must be indentical in format to those sent over the regular transport. Signed-off-by: Dean Camera <dean@fourwalledcubicle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-26samples: bpf: Remove bpf_load loader completelyDaniel T. Lee4-731/+5
Numerous refactoring that rewrites BPF programs written with bpf_load to use the libbpf loader was finally completed, resulting in BPF programs using bpf_load within the kernel being completely no longer present. This commit removes bpf_load, an outdated bpf loader that is difficult to keep up with the latest kernel BPF and causes confusion. Also, this commit removes the unused trace_helper and bpf_load from samples/bpf target objects from Makefile. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-8-danieltimlee@gmail.com
2020-11-26samples: bpf: Fix lwt_len_hist reusing previous BPF mapDaniel T. Lee2-0/+2
Currently, lwt_len_hist's map lwt_len_hist_map is uses pinning, and the map isn't cleared on test end. This leds to reuse of that map for each test, which prevents the results of the test from being accurate. This commit fixes the problem by removing of pinned map from bpffs. Also, this commit add the executable permission to shell script files. Fixes: f74599f7c5309 ("bpf: Add tests and samples for LWT-BPF") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-7-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor test_overhead program with libbpfDaniel T. Lee2-24/+60
This commit refactors the existing program with libbpf bpf loader. Since the kprobe, tracepoint and raw_tracepoint bpf program can be attached with single bpf_program__attach() interface, so the corresponding function of libbpf is used here. Rather than specifying the number of cpus inside the code, this commit uses the number of available cpus with _SC_NPROCESSORS_ONLN. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-6-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor ibumad program with libbpfDaniel T. Lee3-31/+68
This commit refactors the existing ibumad program with libbpf bpf loader. Attach/detach of Tracepoint bpf programs has been managed with the generic bpf_program__attach() and bpf_link__destroy() from the libbpf. Also, instead of using the previous BPF MAP definition, this commit refactors ibumad MAP definition with the new BTF-defined MAP format. To verify that this bpf program works without an infiniband device, try loading ib_umad kernel module and test the program as follows: # modprobe ib_umad # ./ibumad Moreover, TRACE_HELPERS has been removed from the Makefile since it is not used on this program. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-5-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor task_fd_query program with libbpfDaniel T. Lee2-28/+75
This commit refactors the existing kprobe program with libbpf bpf loader. To attach bpf program, this uses generic bpf_program__attach() approach rather than using bpf_load's load_bpf_file(). To attach bpf to perf_event, instead of using previous ioctl method, this commit uses bpf_program__attach_perf_event since it manages the enable of perf_event and attach of BPF programs to it, which is much more intuitive way to achieve. Also, explicit close(fd) has been removed since event will be closed inside bpf_link__destroy() automatically. Furthermore, to prevent conflict of same named uprobe events, O_TRUNC flag has been used to clear 'uprobe_events' interface. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-4-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor test_cgrp2_sock2 program with libbpfDaniel T. Lee3-22/+62
This commit refactors the existing cgroup program with libbpf bpf loader. The original test_cgrp2_sock2 has keeped the bpf program attached to the cgroup hierarchy even after the exit of user program. To implement the same functionality with libbpf, this commit uses the BPF_LINK_PINNING to pin the link attachment even after it is closed. Since this uses LINK instead of ATTACH, detach of bpf program from cgroup with 'test_cgrp2_sock' is not used anymore. The code to mount the bpf was added to the .sh file in case the bpff was not mounted on /sys/fs/bpf. Additionally, to fix the problem that shell script cannot find the binary object from the current path, relative path './' has been added in front of binary. Fixes: 554ae6e792ef3 ("samples/bpf: add userspace example for prohibiting sockets") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-3-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor hbm program with libbpfDaniel T. Lee5-72/+78
This commit refactors the existing cgroup programs with libbpf bpf loader. Since bpf_program__attach doesn't support cgroup program attachment, this explicitly attaches cgroup bpf program with bpf_program__attach_cgroup(bpf_prog, cg1). Also, to change attach_type of bpf program, this uses libbpf's bpf_program__set_expected_attach_type helper to switch EGRESS to INGRESS. To keep bpf program attached to the cgroup hierarchy even after the exit, this commit uses the BPF_LINK_PINNING to pin the link attachment even after it is closed. Besides, this program was broken due to the typo of BPF MAP definition. But this commit solves the problem by fixing this from 'queue_stats' map struct hvm_queue_stats -> hbm_queue_stats. Fixes: 36b5d471135c ("selftests/bpf: samples/bpf: Split off legacy stuff from bpf_helpers.h") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-2-danieltimlee@gmail.com
2020-11-24samples: qmi: Constify static qmi opsRikard Falkeborn1-2/+2
The only usage of qmi_sample_handlers[] and lookup_ops is to pass their addresses to qmi_handle_init() which accepts const pointers to both qmi_ops and qmi_msg_handler. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201124212954.17750-1-rikard.falkeborn@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-17samples/bpf: Increment Tx stats at sendingMagnus Karlsson1-3/+3
Increment the statistics over how many Tx packets have been sent at the time of sending instead of at the time of completion. This as a completion event means that the buffer has been sent AND returned to user space. The packet always gets sent shortly after sendto() is called. The kernel might, for performance reasons, decide to not return every single buffer to user space immediately after sending, for example, only after a batch of packets have been transmitted. Incrementing the number of packets sent at completion, will in that case be confusing as if you send a single packet, the counter might show zero for a while even though the packet has been transmitted. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/1605525167-14450-2-git-send-email-magnus.karlsson@gmail.com
2020-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2-180/+0
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10samples/bpf: Remove unused test_ipip.shHangbin Liu1-179/+0
The tcbpf2_kern.o and related kernel sections are moved to bpf selftest folder since b05cd7404323 ("samples/bpf: remove the bpf tunnel testsuite."). Remove this one as well. Fixes: b05cd7404323 ("samples/bpf: remove the bpf tunnel testsuite.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201110015013.1570716-3-liuhangbin@gmail.com
2020-11-10samples/bpf: Remove duplicate include in hbmMenglong Dong1-1/+0
The 'bpf/bpf.h' include in 'samples/bpf/hbm.c' is duplicated. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/1604654034-52821-1-git-send-email-dong.menglong@zte.com.cn
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski5-5/+5
Alexei Starovoitov says: ==================== pull-request: bpf 2020-11-06 1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David. 2) Tighten bpf_lsm function check, from KP. 3) Fix bpftool attaching to flow dissector, from Lorenz. 4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard. * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Update verification logic for LSM programs bpf: Zero-fill re-used per-cpu map element bpf: BPF_PRELOAD depends on BPF_SYSCALL tools/bpftool: Fix attaching flow dissector libbpf: Fix possible use after free in xsk_socket__delete libbpf: Fix null dereference in xsk_socket__delete libbpf, hashmap: Fix undefined behavior in hash_bits bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE tools, bpftool: Remove two unused variables. tools, bpftool: Avoid array index warnings. xsk: Fix possible memory leak at socket close bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs samples/bpf: Set rlimit for memlock to infinity in all samples bpf: Fix -Wshadow warnings selftest/bpf: Fix profiler test using CO-RE relocation for enums ==================== Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-28misc: mic: remove the MIC driversSudeep Dutt7-2376/+0
This patch removes the MIC drivers from the kernel tree since the corresponding devices have been discontinued. Removing the dma and char-misc changes in one patch and merging via the char-misc tree is best to avoid any potential build breakage. Cc: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27samples/bpf: Set rlimit for memlock to infinity in all samplesToke Høiland-Jørgensen5-5/+5
The memlock rlimit is a notorious source of failure for BPF programs. Most of the samples just set it to infinity, but a few used a lower limit. The problem with unconditionally setting a lower limit is that this will also override the limit if the system-wide setting is *higher* than the limit being set, which can lead to failures on systems that lock a lot of memory, but set 'ulimit -l' to unlimited before running a sample. One fix for this is to only conditionally set the limit if the current limit is lower, but it is simpler to just unify all the samples and have them all set the limit to infinity. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20201026233623.91728-1-toke@redhat.com
2020-10-22bpf, libbpf: Guard bpf inline asm from bpf_tail_call_staticDaniel Borkmann1-4/+4
Yaniv reported a compilation error after pulling latest libbpf: [...] ../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error: unknown register name 'r0' in asm : "r0", "r1", "r2", "r3", "r4", "r5"); [...] The issue got triggered given Yaniv was compiling tracing programs with native target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR to BPF object file. Given that clang was expecting x86 inline asm and not BPF one the error complained that these regs don't exist on the former. Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid to use. BPF tracing programs on more modern kernels use BPF target anyway and thus the bpf_tail_call_static() function will be available for them. BPF inline asm is supported since clang 7 (clang <= 6 otherwise throws same above error), and __bpf_unreachable() since clang 8, therefore include the latter condition in order to prevent compilation errors for older clang versions. Given even an old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did not bother to special case the __bpf_unreachable() inside bpf_tail_call_static() further. Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they still have the old hacky way to even compile networking progs with native instead of BPF target so bpf_tail_call_static() won't be defined there anymore. Fixes: 0e9f6841f664 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs") Reported-by: Yaniv Agman <yanivagman@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Tested-by: Yaniv Agman <yanivagman@gmail.com> Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds33-476/+2148
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-15Merge tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfsLinus Torvalds1-40/+19
Pull configfs updates from Christoph Hellwig: "Various cleanups for the configfs samples (Bartosz Golaszewski)" * tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfs: samples: configfs: prefer pr_err() over bare printk(KERN_ERR samples: configfs: don't use spaces before tabs samples: configfs: consolidate local variables of the same type samples: configfs: don't reinitialize variables which are already zeroed samples: configfs: replace simple_strtoul() with kstrtoint() samples: configfs: fix alignment in item struct samples: configfs: drop unnecessary ternary operators samples: configfs: remove redundant newlines MAINTAINERS: add the sample directory to the configfs entry
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+2
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-10-15Merge tag 'char-misc-5.10-rc1' of ↵Linus Torvalds4-12/+913
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ...
2020-10-14Merge tag 'kernel-clone-v5.9' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull kernel_clone() updates from Christian Brauner: "During the v5.9 merge window we reworked the process creation codepaths across multiple architectures. After this work we were only left with the _do_fork() helper based on the struct kernel_clone_args calling convention. As was pointed out _do_fork() isn't valid kernelese especially for a helper that isn't just static. This series removes the _do_fork() helper and introduces the new kernel_clone() helper. The process creation cleanup didn't change the name to something more reasonable mainly because _do_fork() was used in quite a few places. So sending this as a separate series seemed the better strategy. I originally intended to send this early in the v5.9 development cycle after the merge window had closed but given that this was touching quite a few places I decided to defer this until the v5.10 merge window" * tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: sched: remove _do_fork() tracing: switch to kernel_clone() kgdbts: switch to kernel_clone() kprobes: switch to kernel_clone() x86: switch to kernel_clone() sparc: switch to kernel_clone() nios2: switch to kernel_clone() m68k: switch to kernel_clone() ia64: switch to kernel_clone() h8300: switch to kernel_clone() fork: introduce kernel_clone()
2020-10-13mm,kmemleak-test.c: move kmemleak-test.c to samples dirHui Su3-0/+103
kmemleak-test.c is just a kmemleak test module, which also can not be used as a built-in kernel module. Thus, i think it may should not be in mm dir, and move the kmemleak-test.c to samples/kmemleak/kmemleak-test.c. Fix the spelling of built-in by the way. Signed-off-by: Hui Su <sh_def@163.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Rob Herring <robh@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Divya Indi <divya.indi@oracle.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: David Howells <dhowells@redhat.com> Link: https://lkml.kernel.org/r/20200925183729.GA172837@rlk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-12Merge tag 'docs-5.10' of git://git.lwn.net/linuxLinus Torvalds2-2/+2
Pull documentation updates from Jonathan Corbet: "As hoped, things calmed down for docs this cycle; fewer changes and almost no conflicts at all. This includes: - A reworked and expanded user-mode Linux document - Some simplifications and improvements for submitting-patches.rst - An emergency fix for (some) problems with Sphinx 3.x - Some welcome automarkup improvements to automatically generate cross-references to struct definitions and other documents - The usual collection of translation updates, typo fixes, etc" * tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits) gpiolib: Update indentation in driver.rst for code excerpts Documentation/admin-guide: tainted-kernels: Fix typo occured Documentation: better locations for sysfs-pci, sysfs-tagging docs: programming-languages: refresh blurb on clang support Documentation: kvm: fix a typo Documentation: Chinese translation of Documentation/arm64/amu.rst doc: zh_CN: index files in arm64 subdirectory mailmap: add entry for <mstarovoitov@marvell.com> doc: seq_file: clarify role of *pos in ->next() docs: trace: ring-buffer-design.rst: use the new SPDX tag Documentation: kernel-parameters: clarify "module." parameters Fix references to nommu-mmap.rst docs: rewrite admin-guide/sysctl/abi.rst docs: fb: Remove vesafb scrollback boot option docs: fb: Remove sstfb scrollback boot option docs: fb: Remove matroxfb scrollback boot option docs: fb: Remove framebuffer scrollback boot option docs: replace the old User Mode Linux HowTo with a new one Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev" Documentation/admin-guide: README & svga: remove use of "rdev" ...
2020-10-11samples: bpf: Refactor XDP kern program maps with BTF-defined mapDaniel T. Lee3-39/+36
Most of the samples were converted to use the new BTF-defined MAP as they moved to libbpf, but some of the samples were missing. Instead of using the previous BPF MAP definition, this commit refactors xdp_monitor and xdp_sample_pkts_kern MAP definition with the new BTF-defined MAP format. Also, this commit removes the max_entries attribute at PERF_EVENT_ARRAY map type. The libbpf's bpf_object__create_map() will automatically set max_entries to the maximum configured number of CPUs on the host. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201010181734.1109-4-danieltimlee@gmail.com
2020-10-11samples: bpf: Replace attach_tracepoint() to attach() in xdp_redirect_cpuDaniel T. Lee2-82/+73
>From commit d7a18ea7e8b6 ("libbpf: Add generic bpf_program__attach()"), for some BPF programs, it is now possible to attach BPF programs with __attach() instead of explicitly calling __attach_<type>(). This commit refactors the __attach_tracepoint() with libbpf's generic __attach() method. In addition, this refactors the logic of setting the map FD to simplify the code. Also, the missing removal of bpf_load.o in Makefile has been fixed. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201010181734.1109-3-danieltimlee@gmail.com
2020-10-11samples: bpf: Refactor xdp_monitor with libbpfDaniel T. Lee2-40/+121
To avoid confusion caused by the increasing fragmentation of the BPF Loader program, this commit would like to change to the libbpf loader instead of using the bpf_load. Thanks to libbpf's bpf_link interface, managing the tracepoint BPF program is much easier. bpf_program__attach_tracepoint manages the enable of tracepoint event and attach of BPF programs to it with a single interface bpf_link, so there is no need to manage event_fd and prog_fd separately. This commit refactors xdp_monitor with using this libbpf API, and the bpf_load is removed and migrated to libbpf. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201010181734.1109-2-danieltimlee@gmail.com
2020-10-07samples: configfs: prefer pr_err() over bare printk(KERN_ERRBartosz Golaszewski1-3/+2
pr_*() printing helpers are preferred over using bare printk(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-07samples: configfs: don't use spaces before tabsBartosz Golaszewski1-1/+1
The copyright notice alarms checkpatch.pl of usin spaces before tabs. Fix this. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-07samples: configfs: consolidate local variables of the same typeBartosz Golaszewski1-2/+1
Move local variables of the same type into a single line for better readability. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-07samples: configfs: don't reinitialize variables which are already zeroedBartosz Golaszewski1-2/+0
The structure containing the storeme field is allocated using kzalloc(). There's no need to set it to 0 again. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-07samples: configfs: replace simple_strtoul() with kstrtoint()Bartosz Golaszewski1-20/+9
simple_strtoul() is deprecated. Use kstrtoint(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-07samples: configfs: fix alignment in item structBartosz Golaszewski1-1/+1
Aling the assignment of a static structure's field to be consistent with all other instances. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-07samples: configfs: drop unnecessary ternary operatorsBartosz Golaszewski1-5/+5
Checking pointers for NULL value before passing them to container_of() is pointless because even if we return NULL from the ternary operator, none of the users checks the returned value but they instead dereference it unconditionally. AFAICT this cannot really happen either. Simplify the code by removing the ternary operators from to_childless() et al. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 16:50:39 +0000