summaryrefslogtreecommitdiffstats
path: root/samples/bpf
AgeCommit message (Collapse)AuthorFilesLines
2020-01-20samples/bpf: Use consistent include paths for libbpfToke Høiland-Jørgensen83-113/+112
Fix all files in samples/bpf to include libbpf header files with the bpf/ prefix, to be consistent with external users of the library. Also ensure that all includes of exported libbpf header files (those that are exported on 'make install' of the library) use bracketed includes instead of quoted. To make sure no new files are introduced that doesn't include the bpf/ prefix in its include, remove tools/lib/bpf from the include path entirely, and use tools/lib instead. Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157952560911.1683545.8795966751309534150.stgit@toke.dk
2020-01-20samples/bpf: Don't try to remove user's homedir on cleanToke Høiland-Jørgensen1-1/+1
The 'clean' rule in the samples/bpf Makefile tries to remove backup files (ending in ~). However, if no such files exist, it will instead try to remove the user's home directory. While the attempt is mostly harmless, it does lead to a somewhat scary warning like this: rm: cannot remove '~': Is a directory Fix this by using find instead of shell expansion to locate any actual backup files that need to be removed. Fixes: b62a796c109c ("samples/bpf: allow make to be run from samples/bpf/ directory") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/157952560126.1683545.7273054725976032511.stgit@toke.dk
2020-01-16devmap: Adjust tracepoint for map-less queue flushJesper Dangaard Brouer1-5/+3
Now that we don't have a reference to a devmap when flushing the device bulk queue, let's change the the devmap_xmit tracepoint to remote the map_id and map_index fields entirely. Rearrange the fields so 'drops' and 'sent' stay in the same position in the tracepoint struct, to make it possible for the xdp_monitor utility to read both the old and the new format. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/157918768613.1458396.9165902403373826572.stgit@toke.dk
2019-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller12-56/+504
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-12-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 127 non-merge commits during the last 17 day(s) which contain a total of 110 files changed, 6901 insertions(+), 2721 deletions(-). There are three merge conflicts. Conflicts and resolution looks as follows: 1) Merge conflict in net/bpf/test_run.c: There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro") which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in BPF_PROG_TEST_RUN"): <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) + sizeof_field(struct __sk_buff, priority), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c There are a few occasions that look similar to this. Always take the chunk with offsetofend(). Note that there is one where the fields differ in here: <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) + sizeof_field(struct __sk_buff, tstamp), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to 850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN"). 2) Merge conflict in arch/riscv/net/bpf_jit_comp.c: (I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.) <<<<<<< HEAD if (is_13b_check(off, insn)) return -1; emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx); ======= emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx); >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Result should look like: emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx); 3) Merge conflict in arch/riscv/include/asm/pgtable.h: <<<<<<< HEAD ======= #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) #define vmemmap ((struct page *)VMEMMAP_START) >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Only take the BPF_* defines from there and move them higher up in the same file. Remove the rest from the chunk. The VMALLOC_* etc defines got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page calls"). Result: [...] #define __S101 PAGE_READ_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) [...] Let me know if there are any other issues. Anyway, the main changes are: 1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific to a provided BPF object file. This provides an alternative, simplified API compared to standard libbpf interaction. Also, add libbpf extern variable resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko. 2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also, add various BPF riscv JIT improvements, from Björn Töpel. 3) Extend bpftool to allow matching BPF programs and maps by name, from Paul Chaignon. 4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI flag for allowing updates without service interruption, from Andrey Ignatov. 5) Cleanup and simplification of ring access functions for AF_XDP with a bonus of 0-5% performance improvement, from Magnus Karlsson. 6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa. 7) Move and extend test_select_reuseport into BPF program tests under BPF selftests, from Jakub Sitnicki. 8) Various BPF sample improvements for xdpsock for customizing parameters to set up and benchmark AF_XDP, from Jay Jayatheerthan. 9) Improve libbpf to provide a ulimit hint on permission denied errors. Also change XDP sample programs to attach in driver mode by default, from Toke Høiland-Jørgensen. 10) Extend BPF test infrastructure to allow changing skb mark from tc BPF programs, from Nikita V. Shirokov. 11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King. 12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after libbpf conversion, from Jesper Dangaard Brouer. 13) Minor misc improvements from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20samples/bpf: Xdp_redirect_cpu fix missing tracepoint attachJesper Dangaard Brouer1-4/+55
When sample xdp_redirect_cpu was converted to use libbpf, the tracepoints used by this sample were not getting attached automatically like with bpf_load.c. The BPF-maps was still getting loaded, thus nobody notice that the tracepoints were not updating these maps. This fix doesn't use the new skeleton code, as this bug was introduced in v5.1 and stable might want to backport this. E.g. Red Hat QA uses this sample as part of their testing. Fixes: bbaf6029c49c ("samples/bpf: Convert XDP samples to libbpf usage") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157685877642.26195.2798780195186786841.stgit@firesoul
2019-12-20samples/bpf: xdpsock: Add option to specify transmit fill patternJay Jayatheerthan1-4/+9
The UDP payload fill pattern can be specified using '-P' or '--tx-pkt-pattern' option. It is an unsigned 32 bit field and defaulted to 0x12345678. The IP and UDP checksum is calculated by the code as per the content of the packet before transmission. Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191220085530.4980-7-jay.jayatheerthan@intel.com
2019-12-20samples/bpf: xdpsock: Add option to specify tx packet sizeJay Jayatheerthan1-11/+265
New option '-s' or '--tx-pkt-size' has been added to specify the transmit packet size. The packet size ranges from 47 to 4096 bytes. When this option is not provided, it defaults to 64 byte packet. The code uses struct ethhdr, struct iphdr and struct udphdr to form the transmit packet. The MAC address, IP address and UDP ports are set to default values. The code calculates IP and UDP checksums before sending the packet. Checksum calculation code in Linux kernel is used for this purpose. The Ethernet FCS is not filled by the code. Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191220085530.4980-6-jay.jayatheerthan@intel.com
2019-12-20samples/bpf: xdpsock: Add option to specify number of packets to sendJay Jayatheerthan1-14/+59
Use '-C' or '--tx-pkt-count' to specify number of packets to send. If it is not specified, the application sends packets forever. If packet count is not a multiple of batch size, last batch sent is less than the batch size. Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191220085530.4980-5-jay.jayatheerthan@intel.com
2019-12-20samples/bpf: xdpsock: Add option to specify batch sizeJay Jayatheerthan1-23/+29
New option to specify batch size for tx, rx and l2fwd has been added. This allows fine tuning to maximize performance. It is specified using '-b' or '--batch_size' options. When not specified default is 64. Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191220085530.4980-4-jay.jayatheerthan@intel.com
2019-12-20samples/bpf: xdpsock: Use common code to handle signal and main exitJay Jayatheerthan1-2/+7
Add code to do cleanup for signals and application completion in a unified fashion. The signal handler sets benckmark_done flag terminating the threads. The cleanup is called before returning from main() function. Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191220085530.4980-3-jay.jayatheerthan@intel.com
2019-12-20samples/bpf: xdpsock: Add duration option to specify how long to runJay Jayatheerthan1-2/+35
The application now supports '-d' or '--duration' option to specify number of seconds to run. This is used in tx, rx and l2fwd features. If this option is not provided, the application runs forever. Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191220085530.4980-2-jay.jayatheerthan@intel.com
2019-12-16samples/bpf: Attach XDP programs in driver mode by defaultToke Høiland-Jørgensen11-12/+58
When attaching XDP programs, userspace can set flags to request the attach mode (generic/SKB mode, driver mode or hw offloaded mode). If no such flags are requested, the kernel will attempt to attach in driver mode, and then silently fall back to SKB mode if this fails. The silent fallback is a major source of user confusion, as users will try to load a program on a device without XDP support, and instead of an error they will get the silent fallback behaviour, not notice, and then wonder why performance is not what they were expecting. In an attempt to combat this, let's switch all the samples to default to explicitly requesting driver-mode attach. As part of this, ensure that all the userspace utilities have a switch to enable SKB mode. For those that have a switch to request driver mode, keep it but turn it into a no-op. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Link: https://lore.kernel.org/bpf/20191216110742.364456-1-toke@redhat.com
2019-12-16samples/bpf: Set -fno-stack-protector when building BPF programsToke Høiland-Jørgensen1-0/+1
It seems Clang can in some cases turn on stack protection by default, which doesn't work with BPF. This was reported once before[0], but it seems the flag to explicitly turn off the stack protector wasn't added to the Makefile, so do that now. The symptom of this is compile errors like the following: error: <unknown>:0:0: in function bpf_prog1 i32 (%struct.__sk_buff*): A call to built-in function '__stack_chk_fail' is not supported. [0] https://www.spinics.net/lists/netdev/msg556400.html Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191216103819.359535-1-toke@redhat.com
2019-12-16samples/bpf: Add missing -lz to TPROGS_LDLIBSToke Høiland-Jørgensen1-1/+1
Since libbpf now links against zlib, this needs to be included in the linker invocation for the userspace programs in samples/bpf that link statically against libbpf. Fixes: 166750bc1dd2 ("libbpf: Support libbpf-provided extern variables") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20191216102405.353834-1-toke@redhat.com
2019-12-16samples/bpf: Reintroduce missed build targetsPrashant Bhole1-0/+2
Add xdp_redirect and per_socket_stats_example in build targets. They got removed from build targets in Makefile reorganization. Fixes: 1d97c6c2511f ("samples/bpf: Base target programs rules on Makefile.target") Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191216071619.25479-1-prashantbhole.linux@gmail.com
2019-12-11samples: bpf: fix syscall_tp due to unused syscallDaniel T. Lee1-2/+16
Currently, open() is called from the user program and it calls the syscall 'sys_openat', not the 'sys_open'. This leads to an error of the program of user side, due to the fact that the counter maps are zero since no function such 'sys_open' is called. This commit adds the kernel bpf program which are attached to the tracepoint 'sys_enter_openat' and 'sys_enter_openat'. Fixes: 1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-12-11samples: bpf: Replace symbol compare of trace_eventDaniel T. Lee1-2/+2
Previously, when this sample is added, commit 1c47910ef8013 ("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and 'sys_write' has been used without no prefixes. But currently there are no exact symbols with these under kallsyms and this leads to failure. This commit changes exact compare to substring compare to keep compatible with exact symbol or prefixed symbol. Fixes: 1c47910ef8013 ("samples/bpf: add perf_event+bpf example") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.com
2019-12-04samples/bpf: Fix broken xdp_rxq_info due to map order assumptionsJesper Dangaard Brouer1-3/+3
In the days of using bpf_load.c the order in which the 'maps' sections were defines in BPF side (*_kern.c) file, were used by userspace side to identify the map via using the map order as an index. In effect the order-index is created based on the order the maps sections are stored in the ELF-object file, by the LLVM compiler. This have also carried over in libbpf via API bpf_map__next(NULL, obj) to extract maps in the order libbpf parsed the ELF-object file. When BTF based maps were introduced a new section type ".maps" were created. I found that the LLVM compiler doesn't create the ".maps" sections in the order they are defined in the C-file. The order in the ELF file is based on the order the map pointer is referenced in the code. This combination of changes lead to xdp_rxq_info mixing up the map file-descriptors in userspace, resulting in very broken behaviour, but without warning the user. This patch fix issue by instead using bpf_object__find_map_by_name() to find maps via their names. (Note, this is the ELF name, which can be longer than the name the kernel retains). Fixes: be5bca44aa6b ("samples: bpf: convert some XDP samples from bpf_load to libbpf") Fixes: 451d1dc886b5 ("samples: bpf: update map definition to new syntax BTF-defined map") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157529025128.29832.5953245340679936909.stgit@firesoul
2019-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller21-228/+339
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-11-20 The following pull-request contains BPF updates for your *net-next* tree. We've added 81 non-merge commits during the last 17 day(s) which contain a total of 120 files changed, 4958 insertions(+), 1081 deletions(-). There are 3 trivial conflicts, resolve it by always taking the chunk from 196e8ca74886c433: <<<<<<< HEAD ======= void *bpf_map_area_mmapable_alloc(u64 size, int numa_node); >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 <<<<<<< HEAD void *bpf_map_area_alloc(u64 size, int numa_node) ======= static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable) >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 <<<<<<< HEAD if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) { ======= /* kmalloc()'ed memory can't be mmap()'ed */ if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) { >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 The main changes are: 1) Addition of BPF trampoline which works as a bridge between kernel functions, BPF programs and other BPF programs along with two new use cases: i) fentry/fexit BPF programs for tracing with practically zero overhead to call into BPF (as opposed to k[ret]probes) and ii) attachment of the former to networking related programs to see input/output of networking programs (covering xdpdump use case), from Alexei Starovoitov. 2) BPF array map mmap support and use in libbpf for global data maps; also a big batch of libbpf improvements, among others, support for reading bitfields in a relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko. 3) Extend s390x JIT with usage of relative long jumps and loads in order to lift the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich. 4) Add BPF audit support and emit messages upon successful prog load and unload in order to have a timeline of events, from Daniel Borkmann and Jiri Olsa. 5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode (XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson. 6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API call named bpf_get_link_xdp_info() for retrieving the full set of prog IDs attached to XDP, from Toke Høiland-Jørgensen. 7) Add BTF support for array of int, array of struct and multidimensional arrays and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau. 8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo. 9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid xdping to be run as standalone, from Jiri Benc. 10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song. 11) Fix a memory leak in BPF fentry test run data, from Colin Ian King. 12) Various smaller misc cleanups and improvements mostly all over BPF selftests and samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15samples/bpf: Add missing option to xdpsock usageAndre Guedes1-0/+2
Commit 743e568c1586 (samples/bpf: Add a "force" flag to XDP samples) introduced the '-F' option but missed adding it to the usage() and the 'long_option' array. Fixes: 743e568c1586 (samples/bpf: Add a "force" flag to XDP samples) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191114162847.221770-2-andre.guedes@intel.com
2019-11-15samples/bpf: Remove duplicate option from xdpsockAndre Guedes1-1/+0
The '-f' option is shown twice in the usage(). This patch removes the outdated version. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191114162847.221770-1-andre.guedes@intel.com
2019-11-11samples/bpf: adjust Makefile and README.rstJesper Dangaard Brouer2-9/+7
Side effect of some kbuild changes resulted in breaking the documented way to build samples/bpf/. This patch change the samples/bpf/Makefile to work again, when invoking make from the subdir samples/bpf/. Also update the documentation in README.rst, to reflect the new way to build. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-10samples/bpf: Use Rx-only and Tx-only sockets in xdpsockMagnus Karlsson1-12/+29
Use Rx-only sockets for the rxdrop sample and Tx-only sockets for the txpush sample in the xdpsock application. This so that we exercise and show case these socket types too. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: William Tu <u9012063@gmail.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/1573148860-30254-5-git-send-email-magnus.karlsson@intel.com
2019-11-10samples/bpf: Add XDP_SHARED_UMEM support to xdpsockMagnus Karlsson4-42/+135
Add support for the XDP_SHARED_UMEM mode to the xdpsock sample application. As libbpf does not have a built in XDP program for this mode, we use an explicitly loaded XDP program. This also serves as an example on how to write your own XDP program that can route to an AF_XDP socket. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: William Tu <u9012063@gmail.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/1573148860-30254-3-git-send-email-magnus.karlsson@intel.com
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08samples: bpf: update map definition to new syntax BTF-defined mapDaniel T. Lee12-178/+178
Since, the new syntax of BTF-defined map has been introduced, the syntax for using maps under samples directory are mixed up. For example, some are already using the new syntax, and some are using existing syntax by calling them as 'legacy'. As stated at commit abd29c931459 ("libbpf: allow specifying map definitions using BTF"), the BTF-defined map has more compatablility with extending supported map definition features. The commit doesn't replace all of the map to new BTF-defined map, because some of the samples still use bpf_load instead of libbpf, which can't properly create BTF-defined map. This will only updates the samples which uses libbpf API for loading bpf program. (ex. bpf_prog_load_xattr) Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-11-08samples: bpf: Update outdated error messageDaniel T. Lee5-7/+7
Currently, under samples, several methods are being used to load bpf program. Since using libbpf is preferred solution, lots of previously used 'load_bpf_file' from bpf_load are replaced with 'bpf_prog_load_xattr' from libbpf. But some of the error messages still show up as 'load_bpf_file' instead of 'bpf_prog_load_xattr'. This commit fixes outdated errror messages under samples and fixes some code style issues. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191107005153.31541-2-danieltimlee@gmail.com
2019-11-02bpf, samples: Use bpf_probe_read_user where appropriateDaniel Borkmann3-5/+5
Use bpf_probe_read_user() helper instead of bpf_probe_read() for samples that attach to kprobes probing on user addresses. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/5b0144b3f8e031ec5e2438bd7de8d7877e63bf2f.1572649915.git.daniel@iogearbox.net
2019-10-31samples/bpf: fix build by setting HAVE_ATTR_TEST to zeroBjörn Töpel1-0/+1
To remove that test_attr__{enabled/open} are used by perf-sys.h, we set HAVE_ATTR_TEST to zero. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: KP Singh <kpsingh@google.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: http://lore.kernel.org/bpf/20191001113307.27796-3-bjorn.topel@gmail.com
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-1/+13
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-12samples/bpf: Add preparation steps and sysroot info to readmeIvan Khoronzhuk1-5/+36
Add couple preparation steps: clean and configuration. Also add newly added sysroot support info to cross-compile section. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-16-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Add sysroot supportIvan Khoronzhuk1-0/+5
Basically it only enables that was added by previous couple fixes. Sysroot contains correct libs installed and its headers. Useful when working with NFC or virtual machine. Usage example: clean (on demand) make ARCH=arm -C samples/bpf clean make ARCH=arm -C tools clean make ARCH=arm clean configure and install headers: make ARCH=arm defconfig make ARCH=arm headers_install build samples/bpf: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- samples/bpf/ \ SYSROOT="path/to/sysroot" Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-15-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Provide C/LDFLAGS to libbpfIvan Khoronzhuk1-1/+2
In order to build lib using C/LD flags of target arch, provide them to libbpf make. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-14-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use target CC environment for HDR_PROBEIvan Khoronzhuk1-3/+2
No need in hacking HOSTCC to be cross-compiler any more, so drop this trick and use target CC for HDR_PROBE. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-11-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use own flags but not HOSTCFLAGSIvan Khoronzhuk1-2/+4
While compiling natively, the host's cflags and ldflags are equal to ones used from HOSTCFLAGS and HOSTLDFLAGS. When cross compiling it should have own, used for target arch. While verification, for arm, arm64 and x86_64 the following flags were used always: -Wall -O2 -fomit-frame-pointer -Wmissing-prototypes -Wstrict-prototypes So, add them as they were verified and used before adding Makefile.target and lets omit "-fomit-frame-pointer" as were proposed while review, as no sense in such optimization for samples. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-10-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Base target programs rules on Makefile.targetIvan Khoronzhuk1-66/+69
The main reason for that - HOSTCC and CC have different aims. HOSTCC is used to build programs running on host, that can cross-comple target programs with CC. It was tested for arm and arm64 cross compilation, based on linaro toolchain, but should work for others. So, in order to split cross compilation (CC) with host build (HOSTCC), lets base samples on Makefile.target. It allows to cross-compile samples/bpf programs with CC while auxialry tools running on host built with HOSTCC. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-9-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Add makefile.target for separate CC target buildIvan Khoronzhuk1-0/+75
The Makefile.target is added only and will be used in sample/bpf/Makefile later in order to switch cross-compiling to CC from HOSTCC environment. The HOSTCC is supposed to build binaries and tools running on the host afterwards, in order to simplify build or so, like "fixdep" or else. In case of cross compiling "fixdep" is executed on host when the rest samples should run on target arch. In order to build binaries for target arch with CC and tools running on host with HOSTCC, lets add Makefile.target for simplicity, having definition and routines similar to ones, used in script/Makefile.host. This allows later add cross-compilation to samples/bpf with minimum changes. The tprog stands for target programs built with CC. Makefile.target contains only stuff needed for samples/bpf, potentially can be reused later and now needed only for unblocking tricky samples/bpf cross compilation. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-8-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Drop unnecessarily inclusion for bpf_loadIvan Khoronzhuk1-1/+1
Drop inclusion for bpf_load -I$(objtree)/usr/include as it is included for all objects anyway, with above line: KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-7-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use __LINUX_ARM_ARCH__ selector for armIvan Khoronzhuk1-0/+8
For arm, -D__LINUX_ARM_ARCH__=X is min version used as instruction set selector and is absolutely required while parsing some parts of headers. It's present in KBUILD_CFLAGS but not in autoconf.h, so let's retrieve it from and add to programs cflags. In another case errors like "SMP is not supported" for armv7 and bunch of other errors are issued resulting to incorrect final object. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-6-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use own EXTRA_CFLAGS for clang commandsIvan Khoronzhuk1-4/+5
It can overlap with CFLAGS used for libraries built with gcc if not now then in next patches. Correct it here for simplicity. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-5-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use --target from cross-compileIvan Khoronzhuk1-1/+1
For cross compiling the target triple can be inherited from cross-compile prefix as it's done in CLANG_FLAGS from kernel makefile. So copy-paste this decision from kernel Makefile. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-4-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Fix cookie_uid_helper_example obj buildIvan Khoronzhuk1-1/+0
Don't list userspace "cookie_uid_helper_example" object in list for bpf objects. 'always' target is used for listing bpf programs, but 'cookie_uid_helper_example.o' is a user space ELF file, and covered by rule `per_socket_stats_example`, so shouldn't be in 'always'. Let us remove `always += cookie_uid_helper_example.o`, which avoids breaking cross compilation due to mismatched includes. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-3-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Fix HDR_PROBE "echo"Ivan Khoronzhuk1-1/+1
echo should be replaced with echo -e to handle '\n' correctly, but instead, replace it with printf as some systems can't handle echo -e. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-2-ivan.khoronzhuk@linaro.org
2019-10-08libbpf: Move bpf_{helpers, helper_defs, endian, tracing}.h into libbpfAndrii Nakryiko1-1/+1
Move bpf_helpers.h, bpf_tracing.h, and bpf_endian.h into libbpf. Move bpf_helper_defs.h generation into libbpf's Makefile. Ensure all those headers are installed along the other libbpf headers. Also, adjust selftests and samples include path to include libbpf now. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191008175942.1769476-6-andriin@fb.com
2019-10-08selftests/bpf: Split off tracing-only helpers into bpf_tracing.hAndrii Nakryiko13-0/+13
Split-off PT_REGS-related helpers into bpf_tracing.h header. Adjust selftests and samples to include it where necessary. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191008175942.1769476-5-andriin@fb.com
2019-10-08selftests/bpf: samples/bpf: Split off legacy stuff from bpf_helpers.hAndrii Nakryiko8-33/+37
Split off few legacy things from bpf_helpers.h into separate bpf_legacy.h file: - load_{byte|half|word}; - remove extra inner_idx and numa_node fields from bpf_map_def and introduce bpf_map_def_legacy for use in samples; - move BPF_ANNOTATE_KV_PAIR into bpf_legacy.h. Adjust samples and selftests accordingly by either including bpf_legacy.h and using bpf_map_def_legacy, or switching to BTF-defined maps altogether. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191008175942.1769476-3-andriin@fb.com
2019-10-07samples: bpf: Add max_pckt_size option at xdp_adjust_tailDaniel T. Lee2-11/+25
Currently, at xdp_adjust_tail_kern.c, MAX_PCKT_SIZE is limited to 600. To make this size flexible, static global variable 'max_pcktsz' is added. By updating new packet size from the user space, xdp_adjust_tail_kern.o will use this value as a new max packet size. This static global variable can be accesible from .data section with bpf_object__find_map* from user space, since it is considered as internal map (accessible with .bss/.data/.rodata suffix). If no '-P <MAX_PCKT_SIZE>' option is used, the size of maximum packet will be 600 as a default. For clarity, change the helper to fetch map from 'bpf_map__next' to 'bpf_object__find_map_fd_by_name'. Also, changed the way to test prog_fd, map_fd from '!= 0' to '< 0', since fd could be 0 when stdin is closed. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191007172117.3916-1-danieltimlee@gmail.com
2019-10-07samples/bpf: Trivial - fix spelling mistake in usageAnton Ivanov1-1/+1
Fix spelling mistake. Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191007082636.14686-1-anton.ivanov@cambridgegreys.com
2019-10-03samples/bpf: Add a workaround for asm_inlineKP Singh1-1/+12
This was added in commit eb111869301e ("compiler-types.h: add asm_inline definition") and breaks samples/bpf as clang does not support asm __inline. Fixes: eb111869301e ("compiler-types.h: add asm_inline definition") Co-developed-by: Florent Revest <revest@google.com> Signed-off-by: Florent Revest <revest@google.com> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191002191652.11432-1-kpsingh@chromium.org
2019-10-03samples/bpf: Fix build for task_fd_query_user.cBjörn Töpel1-0/+1
Add missing include for <linux/perf_event.h> which was removed from perf-sys.h in commit 91854f9a077e ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h"). Fixes: 91854f9a077e ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h") Reported-by: KP Singh <kpsingh@google.com> Reported-by: Florent Revest <revest@google.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: KP Singh <kpsingh@google.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191001112249.27341-1-bjorn.topel@gmail.com