summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds500-10820/+17287
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-31Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - remove hid_have_special_driver[] entry hard requirement for any newly supported VID/PID by a specific non-core hid driver, and general related cleanup of HID matching core, from Benjamin Tissoires - support for new Wacom devices and a few small fixups for already supported ones in Wacom driver, from Aaron Armstrong Skomra and Jason Gerecke - sysfs interface fix for roccat driver from Dan Carpenter - support for new Asus HW (T100TAF, T100HA, T200TA) from Hans de Goede - improved support for Jabra devices, from Niels Skou Olsen - other assorted small fixes and new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working HID: roccat: prevent an out of bounds read in kovaplus_profile_activated() HID: asus: Fix special function keys on T200TA HID: asus: Add touchpad max x/y and resolution info for the T200TA HID: wacom: Add support for One by Wacom (CTL-472 / CTL-672) HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktop HID: elecom: rewrite report fixup for EX-G and future mice HID: sony: Report DS4 version info through sysfs HID: sony: Print reversed MAC address via %pMR HID: wacom: EKR: ensure devres groups at higher indexes are released HID: rmi: Support the Fujitsu R726 Pad dock using hid-rmi HID: add quirk for another PIXART OEM mouse used by HP HID: quirks: make array hid_quirks static HID: hid-multitouch: support fine-grain orientation reporting HID: asus: Add product-id for the T100TAF and T100HA keyboard docks HID: elo: clear BTN_LEFT mapping HID: multitouch: Combine all left-button events in a frame HID: multitouch: Only look at non touch fields in first packet of a frame HID: multitouch: Properly deal with Win8 PTP reports with 0 touches ...
2018-01-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-4/+2
Pull RDMA subsystem updates from Jason Gunthorpe: "Overall this cycle did not have any major excitement, and did not require any shared branch with netdev. Lots of driver updates, particularly of the scale-up and performance variety. The largest body of core work was Parav's patches fixing and restructing some of the core code to make way for future RDMA containerization. Summary: - misc small driver fixups to bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes - several major feature adds to bnxt_re driver: SRIOV VF RoCE support, HugePages support, extended hardware stats support, and SRQ support - a notable number of fixes to the i40iw driver from debugging scale up testing - more work to enable the new hip08 chip in the hns driver - misc small ULP fixups to srp/srpt//ipoib - preparation for srp initiator and target to support the RDMA-CM protocol for connections - add RDMA-CM support to srp initiator, srp target is still a WIP - fixes for a couple of places where ipoib could spam the dmesg log - fix encode/decode of FDR/EDR data rates in the core - many patches from Parav with ongoing work to clean up inconsistencies and bugs in RoCE support around the rdma_cm - mlx5 driver support for the userspace features 'thread domain', 'wallclock timestamps' and 'DV Direct Connected transport'. Support for the firmware dual port rocee capability - core support for more than 32 rdma devices in the char dev allocation - kernel doc updates from Randy Dunlap - new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss' - one minor change to the kobject code acked by Greg KH" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits) RDMA/nldev: Provide detailed QP information RDMA/nldev: Provide global resource utilization RDMA/core: Add resource tracking for create and destroy PDs RDMA/core: Add resource tracking for create and destroy CQs RDMA/core: Add resource tracking for create and destroy QPs RDMA/restrack: Add general infrastructure to track RDMA resources RDMA/core: Save kernel caller name when creating PD and CQ objects RDMA/core: Use the MODNAME instead of the function name for pd callers RDMA: Move enum ib_cq_creation_flags to uapi headers IB/rxe: Change RDMA_RXE kconfig to use select IB/qib: remove qib_keys.c IB/mthca: remove mthca_user.h RDMA/cm: Fix access to uninitialized variable RDMA/cma: Use existing netif_is_bond_master function IB/core: Avoid SGID attributes query while converting GID from OPA to IB RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure IB/umad: Fix use of unprotected device pointer IB/iser: Combine substrings for three messages IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out() IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out() ...
2018-01-31Merge branch 'work.misc' of ↵Linus Torvalds1-48/+11
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "All kinds of misc stuff, without any unifying topic, from various people. Neil's d_anon patch, several bugfixes, introduction of kvmalloc analogue of kmemdup_user(), extending bitfield.h to deal with fixed-endians, assorted cleanups all over the place..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits) alpha: osf_sys.c: use timespec64 where appropriate alpha: osf_sys.c: fix put_tv32 regression jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path dcache: delete unused d_hash_mask dcache: subtract d_hash_shift from 32 in advance fs/buffer.c: fold init_buffer() into init_page_buffers() fs: fold __inode_permission() into inode_permission() fs: add RWF_APPEND sctp: use vmemdup_user() rather than badly open-coding memdup_user() snd_ctl_elem_init_enum_names(): switch to vmemdup_user() replace_user_tlv(): switch to vmemdup_user() new primitive: vmemdup_user() memdup_user(): switch to GFP_USER eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget() eventfd: fold eventfd_ctx_read() into eventfd_read() eventfd: convert to use anon_inode_getfd() nfs4file: get rid of pointless include of btrfs.h uvc_v4l2: clean copyin/copyout up vme_user: don't use __copy_..._user() usx2y: don't bother with memdup_user() for 16-byte structure ...
2018-01-31tls: Add support for encryption using async offload acceleratorVakul Garg1-1/+7
Async crypto accelerators (e.g. drivers/crypto/caam) support offloading GCM operation. If they are enabled, crypto_aead_encrypt() return error code -EINPROGRESS. In this case tls_do_encryption() needs to wait on a completion till the time the response for crypto offload request is received. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31ip6mr: fix stale iteratorNikolay Aleksandrov1-0/+1
When we dump the ip6mr mfc entries via proc, we initialize an iterator with the table to dump but we don't clear the cache pointer which might be initialized from a prior read on the same descriptor that ended. This can result in lock imbalance (an unnecessary unlock) leading to other crashes and hangs. Clear the cache pointer like ipmr does to fix the issue. Thanks for the reliable reproducer. Here's syzbot's trace: WARNING: bad unlock balance detected! 4.15.0-rc3+ #128 Not tainted syzkaller971460/3195 is trying to release lock (mrt_lock) at: [<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 but there are no more locks to release! other info that might help us debug this: 1 lock held by syzkaller971460/3195: #0: (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0 fs/seq_file.c:165 stack backtrace: CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561 __lock_release kernel/locking/lockdep.c:3775 [inline] lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023 __raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 traverse+0x3bc/0xa00 fs/seq_file.c:135 seq_read+0x96a/0x13d0 fs/seq_file.c:189 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 BUG: sleeping function called from invalid context at lib/usercopy.c:25 in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460 INFO: lockdep is turned off. CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060 __might_sleep+0x95/0x190 kernel/sched/core.c:6013 __might_fault+0xab/0x1d0 mm/memory.c:4525 _copy_to_user+0x2c/0xc0 lib/usercopy.c:25 copy_to_user include/linux/uaccess.h:155 [inline] seq_read+0xcb4/0x13d0 fs/seq_file.c:279 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0 lib/usercopy.c:26 Reported-by: syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31net/sched: kconfig: Remove blank help textsUlf Magnusson1-3/+0
Blank help texts are probably either a typo, a Kconfig misunderstanding, or some kind of half-committing to adding a help text (in which case a TODO comment would be clearer, if the help text really can't be added right away). Best to remove them, IMO. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31openvswitch: meter: Use 64-bit arithmetic instead of 32-bitGustavo A. R. Silva1-1/+1
Add suffix LL to constant 1000 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type long long int (64 bits, signed). The expression (band->burst_size + band->rate) * 1000 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1461563 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31tcp_nv: fix potential integer overflow in tcpnv_ackedGustavo A. R. Silva1-1/+1
Add suffix ULL to constant 80000 in order to avoid a potential integer overflow and give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64. The current cast to u64 effectively applies to the whole expression as an argument of type u64 to be passed to div64_u64, but it does not prevent it from being evaluated using 32-bit arithmetic instead of 64-bit arithmetic. Also, once the expression is properly evaluated using 64-bit arithmentic, there is no need for the parentheses and the external cast to u64. Addresses-Coverity-ID: 1357588 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINKChristian Brauner1-5/+1
- Backwards Compatibility: If userspace wants to determine whether RTM_NEWLINK supports the IFLA_IF_NETNSID property they should first send an RTM_GETLINK request with IFLA_IF_NETNSID on lo. If either EACCESS is returned or the reply does not include IFLA_IF_NETNSID userspace should assume that IFLA_IF_NETNSID is not supported on this kernel. If the reply does contain an IFLA_IF_NETNSID property userspace can send an RTM_NEWLINK with a IFLA_IF_NETNSID property. If they receive EOPNOTSUPP then the kernel does not support the IFLA_IF_NETNSID property with RTM_NEWLINK. Userpace should then fallback to other means. - Security: Callers must have CAP_NET_ADMIN in the owning user namespace of the target network namespace. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31Merge branches 'for-4.16/upstream' and 'for-4.15/upstream-fixes' into for-linusJiri Kosina537-9457/+20232
Pull assorted small fixes queued for merge window.
2018-01-30Merge tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds12-676/+666
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable bugfixes: - Fix breakages in the nfsstat utility due to the inclusion of the NFSv4 LOOKUPP operation - Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall() due to nfs_idmap_legacy_upcall() being called without an 'aux' parameter - Fix a refcount leak in the standard O_DIRECT error path - Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path - Fix CPU latency issues with nfs_commit_release_pages() - Fix the LAYOUTUNAVAILABLE error case in the file layout type - NFS: Fix a race between mmap() and O_DIRECT Features: - Support the statx() mask and query flags to enable optimisations when the user is requesting only attributes that are already up to date in the inode cache, or is specifying the AT_STATX_DONT_SYNC flag - Add a module alias for the SCSI pNFS layout type Bugfixes: - Automounting when resolving a NFSv4 referral should preserve the RDMA transport protocol settings - Various other RDMA bugfixes from Chuck - pNFS block layout fixes - Always set NFS_LOCK_LOST when a lock is lost" * tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits) NFS: Fix a race between mmap() and O_DIRECT NFS: Remove a redundant call to unmap_mapping_range() pnfs/blocklayout: Ensure disk address in block device map pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectors lockd: Fix server refcounting SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepoint SUNRPC: Micro-optimize __rpc_execute SUNRPC: task_run_action should display tk_callback sunrpc: Format RPC events consistently for display SUNRPC: Trace xprt_timer events xprtrdma: Correct some documenting comments xprtrdma: Fix "bytes registered" accounting xprtrdma: Instrument allocation/release of rpcrdma_req/rep objects xprtrdma: Add trace points to instrument QP and CQ access upcalls xprtrdma: Add trace points in the client-side backchannel code paths xprtrdma: Add trace points for connect events xprtrdma: Add trace points to instrument MR allocation and recovery xprtrdma: Add trace points to instrument memory invalidation xprtrdma: Add trace points in reply decoder path xprtrdma: Add trace points to instrument memory registration ..
2018-01-30Merge branch 'work.sock_recvmsg' of ↵Linus Torvalds4-18/+17
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull kern_recvmsg reduction from Al Viro: "kernel_recvmsg() is a set_fs()-using wrapper for sock_recvmsg(). In all but one case that is not needed - use of ITER_KVEC for ->msg_iter takes care of the data and does not care about set_fs(). The only exception is svc_udp_recvfrom() where we want cmsg to be store into kernel object; everything else can just use sock_recvmsg() and be done with that. A followup converting svc_udp_recvfrom() away from set_fs() (and killing kernel_recvmsg() off) is *NOT* in here - I'd like to hear what netdev folks think of the approach proposed in that followup)" * 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: tipc: switch to sock_recvmsg() smc: switch to sock_recvmsg() ipvs: switch to sock_recvmsg() mISDN: switch to sock_recvmsg() drbd: switch to sock_recvmsg() lustre lnet_sock_read(): switch to sock_recvmsg() cfs2: switch to sock_recvmsg() ncpfs: switch to sock_recvmsg() dlm: switch to sock_recvmsg() svc_recvfrom(): switch to sock_recvmsg()
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds30-97/+96
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-30Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds4-19/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU changes in this cycle were: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Torture-test updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) torture: Save a line in stutter_wait(): while -> for torture: Eliminate torture_runnable and perf_runnable torture: Make stutter less vulnerable to compilers and races locking/locktorture: Fix num reader/writer corner cases locking/locktorture: Fix rwsem reader_delay torture: Place all torture-test modules in one MAINTAINERS group rcutorture/kvm-build.sh: Skip build directory check rcutorture: Simplify functions.sh include path rcutorture: Simplify logging rcutorture/kvm-recheck-*: Improve result directory readability check rcutorture/kvm.sh: Support execution from any directory rcutorture/kvm.sh: Use consistent help text for --qemu-args rcutorture/kvm.sh: Remove unused variable, `alldone` rcutorture: Remove unused script, config2frag.sh rcutorture/configinit: Fix build directory error message rcutorture: Preempt RCU-preempt readers more vigorously torture: Reduce #ifdefs for preempt_schedule() rcu: Remove have_rcu_nocb_mask from tree_plugin.h rcu: Add comment giving debug strategy for double call_rcu() tracing, rcu: Hide trace event rcu_nocb_wake when not used ...
2018-01-30Merge tag v4.15 of ↵Jason Gunthorpe166-890/+1567
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git To resolve conflicts in: drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/mlx5/qp.c From patches merged into the -rc cycle. The conflict resolution matches what linux-next has been carrying. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-30ipmr: Fix ptrdiff_t print formattingJames Hogan1-1/+1
ipmr_vif_seq_show() prints the difference between two pointers with the format string %2zd (z for size_t), however the correct format string is %2td instead (t for ptrdiff_t). The same bug in ip6mr_vif_seq_show() was already fixed long ago by commit d430a227d272 ("bogus format in ip6mr"). Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29tcp: release sk_frag.page in tcp_disconnectLi RongQing1-0/+6
socket can be disconnected and gets transformed back to a listening socket, if sk_frag.page is not released, which will be cloned into a new socket by sk_clone_lock, but the reference count of this page is increased, lead to a use after free or double free issue Signed-off-by: Li RongQing <lirongqing@baidu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv4: Get the address of interface correctly.Tonghao Zhang1-0/+4
When using ioctl to get address of interface, we can't get it anymore. For example, the command is show as below. # ifconfig eth0 In the patch ("03aef17bb79b3"), the devinet_ioctl does not return a suitable value, even though we can find it in the kernel. Then fix it now. Fixes: 03aef17bb79b3 ("devinet_ioctl(): take copyin/copyout to caller") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net_sched: gen_estimator: fix lockdep splatEric Dumazet1-0/+4
syzbot reported a lockdep splat in gen_new_estimator() / est_fetch_counters() when attempting to lock est->stats_lock. Since est_fetch_counters() is called from BH context from timer interrupt, we need to block BH as well when calling it from process context. Most qdiscs use per cpu counters and are immune to the problem, but net/sched/act_api.c and net/netfilter/xt_RATEEST.c are using a spinlock to protect their data. They both call gen_new_estimator() while object is created and not yet alive, so this bug could not trigger a deadlock, only a lockdep splat. Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv6: addrconf: break critical section in addrconf_verify_rtnl()Eric Dumazet1-0/+2
Heiner reported a lockdep splat [1] This is caused by attempting GFP_KERNEL allocation while RCU lock is held and BH blocked. We believe that addrconf_verify_rtnl() could run for a long period, so instead of using GFP_ATOMIC here as Ido suggested, we should break the critical section and restart it after the allocation. [1] [86220.125562] ============================= [86220.125586] WARNING: suspicious RCU usage [86220.125612] 4.15.0-rc7-next-20180110+ #7 Not tainted [86220.125641] ----------------------------- [86220.125666] kernel/sched/core.c:6026 Illegal context switch in RCU-bh read-side critical section! [86220.125711] other info that might help us debug this: [86220.125755] rcu_scheduler_active = 2, debug_locks = 1 [86220.125792] 4 locks held by kworker/0:2/1003: [86220.125817] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125895] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125959] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.126017] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.126111] stack backtrace: [86220.126142] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.126185] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.126250] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.126288] Call Trace: [86220.126312] dump_stack+0x70/0x9e [86220.126337] lockdep_rcu_suspicious+0xce/0xf0 [86220.126365] ___might_sleep+0x1d3/0x240 [86220.126390] __might_sleep+0x45/0x80 [86220.126416] kmem_cache_alloc_trace+0x53/0x250 [86220.126458] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126498] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126538] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126580] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126623] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126664] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126708] addrconf_verify_work+0xe/0x20 [ipv6] [86220.126738] process_one_work+0x258/0x680 [86220.126765] worker_thread+0x35/0x3f0 [86220.126790] kthread+0x124/0x140 [86220.126813] ? process_one_work+0x680/0x680 [86220.126839] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.126869] ? umh_complete+0x40/0x40 [86220.126893] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.126926] ret_from_fork+0x4b/0x60 [86220.126999] BUG: sleeping function called from invalid context at mm/slab.h:420 [86220.127041] in_atomic(): 1, irqs_disabled(): 0, pid: 1003, name: kworker/0:2 [86220.127082] 4 locks held by kworker/0:2/1003: [86220.127107] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127179] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127242] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.127300] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.127414] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.127463] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.127528] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.127568] Call Trace: [86220.127591] dump_stack+0x70/0x9e [86220.127616] ___might_sleep+0x14d/0x240 [86220.127644] __might_sleep+0x45/0x80 [86220.127672] kmem_cache_alloc_trace+0x53/0x250 [86220.127717] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127762] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127807] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127854] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127903] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127950] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127998] addrconf_verify_work+0xe/0x20 [ipv6] [86220.128032] process_one_work+0x258/0x680 [86220.128063] worker_thread+0x35/0x3f0 [86220.128091] kthread+0x124/0x140 [86220.128117] ? process_one_work+0x680/0x680 [86220.128146] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.128180] ? umh_complete+0x40/0x40 [86220.128207] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.128243] ret_from_fork+0x4b/0x60 Fixes: f3d9832e56c4 ("ipv6: addrconf: cleanup locking in ipv6_add_addr") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv6: change route cache aging logicWei Wang1-8/+12
In current route cache aging logic, if a route has both RTF_EXPIRE and RTF_GATEWAY set, the route will only be removed if the neighbor cache has no NTF_ROUTER flag. Otherwise, even if the route has expired, it won't get deleted. Fix this logic to always check if the route has expired first and then do the gateway neighbor cache check if previous check decide to not remove the exception entry. Fixes: 1859bac04fb6 ("ipv6: remove from fib tree aged out RTF_CACHE dst") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: ipv6: send unsolicited NA after DADDavid Ahern2-4/+31
Unsolicited IPv6 neighbor advertisements should be sent after DAD completes. Update ndisc_send_unsol_na to skip tentative, non-optimistic addresses and have those sent by addrconf_dad_completed after DAD. Fixes: 4a6e3c5def13c ("net: ipv6: send unsolicited NA on admin up") Reported-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net_sched: implement ->change_tx_queue_len() for pfifo_fastCong Wang1-0/+18
pfifo_fast used to drop based on qdisc_dev(qdisc)->tx_queue_len, so we have to resize skb array when we change tx_queue_len. Other qdiscs which read tx_queue_len are fine because they all save it to sch->limit or somewhere else in qdisc during init. They don't have to implement this, it is nicer if they do so that users don't have to re-configure qdisc after changing tx_queue_len. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net_sched: plug in qdisc ops change_tx_queue_lenCong Wang2-0/+34
Introduce a new qdisc ops ->change_tx_queue_len() so that each qdisc could decide how to implement this if it wants. Previously we simply read dev->tx_queue_len, after pfifo_fast switches to skb array, we need this API to resize the skb array when we change dev->tx_queue_len. To avoid handling race conditions with TX BH, we need to deactivate all TX queues before change the value and bring them back after we are done, this also makes implementation easier. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: introduce helper dev_change_tx_queue_len()Cong Wang3-37/+34
This patch promotes the local change_tx_queue_len() to a core helper function, dev_change_tx_queue_len(), so that rtnetlink and net-sysfs could share the code. This also prepares for the following patch. Note, the -EFAULT in the original code doesn't make sense, we should propagate the errno from notifiers. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29dev: advertise the new ifindex when the netns iface changesNicolas Dichtel2-18/+32
The goal is to let the user follow an interface that moves to another netns. CC: Jiri Benc <jbenc@redhat.com> CC: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29dev: always advertise the new nsid when the netns iface changesNicolas Dichtel1-4/+1
The user should be able to follow any interface that moves to another netns. There is no reason to hide physical interfaces. CC: Jiri Benc <jbenc@redhat.com> CC: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv6: Fix SO_REUSEPORT UDP socket with implicit sk_ipv6onlyMartin KaFai Lau1-4/+7
If a sk_v6_rcv_saddr is !IPV6_ADDR_ANY and !IPV6_ADDR_MAPPED, it implicitly implies it is an ipv6only socket. However, in inet6_bind(), this addr_type checking and setting sk->sk_ipv6only to 1 are only done after sk->sk_prot->get_port(sk, snum) has been completed successfully. This inconsistency between sk_v6_rcv_saddr and sk_ipv6only confuses the 'get_port()'. In particular, when binding SO_REUSEPORT UDP sockets, udp_reuseport_add_sock(sk,...) is called. udp_reuseport_add_sock() checks "ipv6_only_sock(sk2) == ipv6_only_sock(sk)" before adding sk to sk2->sk_reuseport_cb. In this case, ipv6_only_sock(sk2) could be 1 while ipv6_only_sock(sk) is still 0 here. The end result is, reuseport_alloc(sk) is called instead of adding sk to the existing sk2->sk_reuseport_cb. It can be reproduced by binding two SO_REUSEPORT UDP sockets on an IPv6 address (!ANY and !MAPPED). Only one of the socket will receive packet. The fix is to set the implicit sk_ipv6only before calling get_port(). The original sk_ipv6only has to be saved such that it can be restored in case get_port() failed. The situation is similar to the inet_reset_saddr(sk) after get_port() has failed. Thanks to Calvin Owens <calvinowens@fb.com> who created an easy reproduction which leads to a fix. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29rtnetlink: enable IFLA_IF_NETNSID for RTM_DELLINKChristian Brauner1-11/+28
- Backwards Compatibility: If userspace wants to determine whether RTM_DELLINK supports the IFLA_IF_NETNSID property they should first send an RTM_GETLINK request with IFLA_IF_NETNSID on lo. If either EACCESS is returned or the reply does not include IFLA_IF_NETNSID userspace should assume that IFLA_IF_NETNSID is not supported on this kernel. If the reply does contain an IFLA_IF_NETNSID property userspace can send an RTM_DELLINK with a IFLA_IF_NETNSID property. If they receive EOPNOTSUPP then the kernel does not support the IFLA_IF_NETNSID property with RTM_DELLINK. Userpace should then fallback to other means. - Security: Callers must have CAP_NET_ADMIN in the owning user namespace of the target network namespace. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29rtnetlink: enable IFLA_IF_NETNSID for RTM_SETLINKChristian Brauner1-3/+0
- Backwards Compatibility: If userspace wants to determine whether RTM_SETLINK supports the IFLA_IF_NETNSID property they should first send an RTM_GETLINK request with IFLA_IF_NETNSID on lo. If either EACCESS is returned or the reply does not include IFLA_IF_NETNSID userspace should assume that IFLA_IF_NETNSID is not supported on this kernel. If the reply does contain an IFLA_IF_NETNSID property userspace can send an RTM_SETLINK with a IFLA_IF_NETNSID property. If they receive EOPNOTSUPP then the kernel does not support the IFLA_IF_NETNSID property with RTM_SETLINK. Userpace should then fallback to other means. To retain backwards compatibility the kernel will first check whether a IFLA_NET_NS_PID or IFLA_NET_NS_FD property has been passed. If either one is found it will be used to identify the target network namespace. This implies that users who do not care whether their running kernel supports IFLA_IF_NETNSID with RTM_SETLINK can pass both IFLA_NET_NS_{FD,PID} and IFLA_IF_NETNSID referring to the same network namespace. - Security: Callers must have CAP_NET_ADMIN in the owning user namespace of the target network namespace. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29rtnetlink: enable IFLA_IF_NETNSID in do_setlink()Christian Brauner1-7/+47
RTM_{NEW,SET}LINK already allow operations on other network namespaces by identifying the target network namespace through IFLA_NET_NS_{FD,PID} properties. This is done by looking for the corresponding properties in do_setlink(). Extend do_setlink() to also look for the IFLA_IF_NETNSID property. This introduces no functional changes since all callers of do_setlink() currently block IFLA_IF_NETNSID by reporting an error before they reach do_setlink(). This introduces the helpers: static struct net *rtnl_link_get_net_by_nlattr(struct net *src_net, struct nlattr *tb[]) static struct net *rtnl_link_get_net_capable(const struct sk_buff *skb, struct net *src_net, struct nlattr *tb[], int cap) to simplify permission checks and target network namespace retrieval for RTM_* requests that already support IFLA_NET_NS_{FD,PID} but get extended to IFLA_IF_NETNSID. To perserve backwards compatibility the helpers look for IFLA_NET_NS_{FD,PID} properties first before checking for IFLA_IF_NETNSID. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-11/+29
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller5-27/+317
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) A number of extensions to tcp-bpf, from Lawrence. - direct R or R/W access to many tcp_sock fields via bpf_sock_ops - passing up to 3 arguments to bpf_sock_ops functions - tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks - optionally calling bpf_sock_ops program when RTO fires - optionally calling bpf_sock_ops program when packet is retransmitted - optionally calling bpf_sock_ops program when TCP state changes - access to tclass and sk_txhash - new selftest 2) div/mod exception handling, from Daniel. One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. After considering _four_ different ways to address the problem, we adapt the same behavior as on some major archs like ARMv8: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary. 3) sockmap sample refactoring, from John. 4) lpm map get_next_key fixes, from Yonghong. 5) test cleanups, from Alexei and Prashant. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26bpf: fix subprog verifier bypass by div/mod by 0 exceptionDaniel Borkmann1-1/+8
One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. While trying to work out an exception handling scheme, I also noticed that programs crafted like the following will currently pass the verifier: 0: (bf) r6 = r1 1: (85) call pc+8 caller: R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 callee: frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_1 10: (b4) (u32) r2 = (u32) 0 11: (b4) (u32) r3 = (u32) 1 12: (3c) (u32) r3 /= (u32) r2 13: (61) r0 = *(u32 *)(r1 +76) 14: (95) exit returning from callee: frame1: R0_w=pkt(id=0,off=0,r=0,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=inv0 R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0,call_1 to caller at 2: R0_w=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 from 14 to 2: R0=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 2: (bf) r1 = r6 3: (61) r1 = *(u32 *)(r1 +80) 4: (bf) r2 = r0 5: (07) r2 += 8 6: (2d) if r2 > r1 goto pc+1 R0=pkt(id=0,off=0,r=8,imm=0) R1=pkt_end(id=0,off=0,imm=0) R2=pkt(id=0,off=8,r=8,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 7: (71) r0 = *(u8 *)(r0 +0) 8: (b7) r0 = 1 9: (95) exit from 6 to 8: safe processed 16 insns (limit 131072), stack depth 0+0 Basically what happens is that in the subprog we make use of a div/mod by 0 exception and in the 'normal' subprog's exit path we just return skb->data back to the main prog. This has the implication that the verifier thinks we always get a pkt pointer in R0 while we still have the implicit 'return 0' from the div as an alternative unconditional return path earlier. Thus, R0 then contains 0, meaning back in the parent prog we get the address range of [0x0, skb->data_end] as read and writeable. Similar can be crafted with other pointer register types. Since i) BPF_ABS/IND is not allowed in programs that contain BPF to BPF calls (and generally it's also disadvised to use in native eBPF context), ii) unknown opcodes don't return zero anymore, iii) we don't return an exception code in dead branches, the only last missing case affected and to fix is the div/mod handling. What we would really need is some infrastructure to propagate exceptions all the way to the original prog unwinding the current stack and returning that code to the caller of the BPF program. In user space such exception handling for similar runtimes is typically implemented with setjmp(3) and longjmp(3) as one possibility which is not available in the kernel, though (kgdb used to implement it in kernel long time ago). I implemented a PoC exception handling mechanism into the BPF interpreter with porting setjmp()/longjmp() into x86_64 and adding a new internal BPF_ABRT opcode that can use a program specific exception code for all exception cases we have (e.g. div/mod by 0, unknown opcodes, etc). While this seems to work in the constrained BPF environment (meaning, here, we don't need to deal with state e.g. from memory allocations that we would need to undo before going into exception state), it still has various drawbacks: i) we would need to implement the setjmp()/longjmp() for every arch supported in the kernel and for x86_64, arm64, sparc64 JITs currently supporting calls, ii) it has unconditional additional cost on main program entry to store CPU register state in initial setjmp() call, and we would need some way to pass the jmp_buf down into ___bpf_prog_run() for main prog and all subprogs, but also storing on stack is not really nice (other option would be per-cpu storage for this, but it also has the drawback that we need to disable preemption for every BPF program types). All in all this approach would add a lot of complexity. Another poor-man's solution would be to have some sort of additional shared register or scratch buffer to hold state for exceptions, and test that after every call return to chain returns and pass R0 all the way down to BPF prog caller. This is also problematic in various ways: i) an additional register doesn't map well into JITs, and some other scratch space could only be on per-cpu storage, which, again has the side-effect that this only works when we disable preemption, or somewhere in the input context which is not available everywhere either, and ii) this adds significant runtime overhead by putting conditionals after each and every call, as well as implementation complexity. Yet another option is to teach verifier that div/mod can return an integer, which however is also complex to implement as verifier would need to walk such fake 'mov r0,<code>; exit;' sequeuence and there would still be no guarantee for having propagation of this further down to the BPF caller as proper exception code. For parent prog, it is also is not distinguishable from a normal return of a constant scalar value. The approach taken here is a completely different one with little complexity and no additional overhead involved in that we make use of the fact that a div/mod by 0 is undefined behavior. Instead of bailing out, we adapt the same behavior as on some major archs like ARMv8 [0] into eBPF as well: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. I verified this also with a test program compiled by gcc and clang, and the behavior matches with the spec. Going forward we adapt the eBPF verifier to emit such rewrites once div/mod by register was seen. cBPF is not touched and will keep existing 'return 0' semantics. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary and this way we would also have the option of more flexibility from LLVM code generation side (which is then fully visible to verifier). Thus, this patch i) fixes the panic seen in above program and ii) doesn't bypass the verifier observations. [0] ARM Architecture Reference Manual, ARMv8 [ARM DDI 0487B.b] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0487b.b/DDI0487B_b_armv8_arm.pdf 1) aarch64 instruction set: section C3.4.7 and C6.2.279 (UDIV) "A division by zero results in a zero being written to the destination register, without any indication that the division by zero occurred." 2) aarch32 instruction set: section F1.4.8 and F5.1.263 (UDIV) "For the SDIV and UDIV instructions, division by zero always returns a zero result." Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-26bpf: xor of a/x in cbpf can be done in 32 bit aluDaniel Borkmann1-2/+2
Very minor optimization; saves 1 byte per program in x86_64 JIT in cBPF prologue. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-26VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSINGStefan Hajnoczi1-1/+1
select(2) with wfds but no rfds must return when the socket is shut down by the peer. This way userspace notices socket activity and gets -EPIPE from the next write(2). Currently select(2) does not return for virtio-vsock when a SEND+RCV shutdown packet is received. This is because vsock_poll() only sets POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the socket is in when the shutdown is received. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed stateAlexey Kodanev1-0/+3
ccid2_hc_tx_rto_expire() timer callback always restarts the timer again and can run indefinitely (unless it is stopped outside), and after commit 120e9dabaf55 ("dccp: defer ccid_hc_tx_delete() at dismantle time"), which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from dccp_destroy_sock() to sk_destruct(), this started to happen quite often. The timer prevents releasing the socket, as a result, sk_destruct() won't be called. Found with LTP/dccp_ipsec tests running on the bonding device, which later couldn't be unloaded after the tests were completed: unregister_netdevice: waiting for bond0 to become free. Usage count = 148 Fixes: 2a91aa396739 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26Merge tag 'linux-can-next-for-4.16-20180126' of ↵David S. Miller1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2018-01-26 this is a pull request for net-next/master consisting of 3 patches. The first two patches target the CAN documentation. The first is by me and fixes pointer to location of fsl,mpc5200-mscan node in the mpc5200 documentation. The second patch is by Robert Schwebel and it converts the plain ASCII documentation to restructured text. The third patch is by Fabrizio Castro add the r8a774[35] support to the rcar_can dt-bindings documentation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: return booleans instead of integersGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true/false instead of 1/0. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: release clcsock from tcp_listen_workerUrsula Braun2-10/+36
Closing a listen socket may hit the warning WARN_ON(sock_owned_by_user(sk)) of tcp_close(), if the wake up of the smc_tcp_listen_worker has not yet finished. This patch introduces smc_close_wait_listen_clcsock() making sure the listening internal clcsock has been closed in smc_tcp_listen_work(), before the listening external SMC socket finishes closing. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: replace sock_put worker by socket refcountingUrsula Braun6-68/+88
Proper socket refcounting makes the sock_put worker obsolete. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: smc_poll improvementsUrsula Braun1-34/+40
Increase the socket refcount during poll wait. Take the socket lock before checking socket state. For a listening socket return a mask independent of state SMC_ACTIVE and cover errors or closed state as well. Get rid of the accept_q loop in smc_accept_poll(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: handle device, port, and QP error eventsUrsula Braun1-13/+25
RoCE device changes cause an IB event, processed in the global event handler for the ROCE device. Problems for a certain Queue Pair cause a QP event, processed in the QP event handler for this QP. Among those events are port errors and other fatal device errors. All link groups using such a port or device must be terminated in those cases. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26Merge branch 'master' of ↵David S. Miller2-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-01-26 One last patch for this development cycle: 1) Add ESN support for IPSec HW offload. From Yossef Efraim. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/ipv6: Add support for onlink flagDavid Ahern1-1/+50
Similar to IPv4 allow routes to be added with the RTNH_F_ONLINK flag. The onlink option requires a gateway and a nexthop device. Any unicast gateway is allowed (including IPv4 mapped addresses and unresolved ones) as long as the gateway is not a local address and if it resolves it must match the given device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/ipv6: Add flags and table id to ip6_nh_lookup_tableDavid Ahern1-4/+8
onlink verification needs to do a lookup in potentially different table than the table in fib6_config and without the RT6_LOOKUP_F_IFACE flag. Change ip6_nh_lookup_table to take table id and flags as input arguments. Both verifications want to ignore link state, so add that flag can stay in the lookup helper. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/ipv6: Move gateway validation into helperDavid Ahern1-36/+49
Move existing code to validate nexthop into a helper. Follow on patch adds support for nexthops marked with onlink, and this helper keeps the complexity of ip6_route_info_create in check. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26can: migrate documentation to restructured textRobert Schwebel1-1/+1
The kernel documentation is now restructured text. Convert the SocketCAN documentation and include it in the toplevel kernel documentation. This patch doesn't do any content change. All references to can.txt in the code are converted to can.rst. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-01-25net/ipv4: Allow send to local broadcast from a socket bound to a VRFDavid Ahern3-3/+33
Message sends to the local broadcast address (255.255.255.255) require uc_index or sk_bound_dev_if to be set to an egress device. However, responses or only received if the socket is bound to the device. This is overly constraining for processes running in an L3 domain. This patch allows a socket bound to the VRF device to send to the local broadcast address by using IP_UNICAST_IF to set the egress interface with packet receipt handled by the VRF binding. Similar to IP_MULTICAST_IF, relax the constraint on setting IP_UNICAST_IF if a socket is bound to an L3 master device. In this case allow uc_index to be set to an enslaved if sk_bound_dev_if is an L3 master device and is the master device for the ifindex. In udp and raw sendmsg, allow uc_index to override the oif if uc_index master device is oif (ie., the oif is an L3 master and the index is an L3 slave). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>