summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2015-04-07Revert "libceph: use memalloc flags for net IO"Ilya Dryomov1-8/+1
This reverts commit 89baaa570ab0b476db09408d209578cfed700e9f. Dirty page throttling should be sufficient for us in the general case so there is no need to use __GFP_MEMALLOC - it would be needed only in the swap-over-rbd case, which we currently don't support. (It would probably take approximately the commit that is being reverted to add that support, but we would also need the "swap" option to distinguish from the general case and make sure swap ceph_client-s aren't shared with anything else.) See ceph-devel threads [1] and [2] for the details of why enabling pfmemalloc reserves for all cases is a bad thing. On top of potential system lockups related to drained emergency reserves, this turned out to cause ceph lockups in case peers are on the same host and communicating via loopback due to sk_filter() dropping pfmemalloc skbs on the receiving side because the receiving loopback socket is not tagged with SOCK_MEMALLOC. [1] "SOCK_MEMALLOC vs loopback" http://www.spinics.net/lists/ceph-devel/msg22998.html [2] "[PATCH] libceph: don't set memalloc flags in loopback case" http://www.spinics.net/lists/ceph-devel/msg23392.html Conflicts: net/ceph/messenger.c [ context: tcp_nodelay option ] Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Mel Gorman <mgorman@suse.de> Cc: Sage Weil <sage@redhat.com> Cc: stable@vger.kernel.org # 3.18+, needs backporting Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Mel Gorman <mgorman@suse.de>
2015-04-06net: dsa: fix filling routing table from OF descriptionPavel Nakonechny1-16/+7
According to description in 'include/net/dsa.h', in cascade switches configurations where there are more than one interconnected devices, 'rtable' array in 'dsa_chip_data' structure is used to indicate which port on this switch should be used to send packets to that are destined for corresponding switch. However, dsa_of_setup_routing_table() fills 'rtable' with port numbers of the _target_ switch, but not current one. This commit removes redundant devicetree parsing and adds needed port number as a function argument. So dsa_of_setup_routing_table() now just looks for target switch number by parsing parent of 'link' device node. To remove possible misunderstandings with the way of determining target switch number, a corresponding comment was added to the source code and to the DSA device tree bindings documentation file. This was tested on a custom board with two Marvell 88E6095 switches with following corresponding routing tables: { -1, 10 } and { 8, -1 }. Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06l2tp: unregister l2tp_net_ops on failure pathWANG Cong1-0/+1
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06ipv6: protect skb->sk accesses from recursive dereference inside the stackhannes@stressinduktion.org3-2/+24
We should not consult skb->sk for output decisions in xmit recursion levels > 0 in the stack. Otherwise local socket settings could influence the result of e.g. tunnel encapsulation process. ipv6 does not conform with this in three places: 1) ip6_fragment: we do consult ipv6_npinfo for frag_size 2) sk_mc_loop in ipv6 uses skb->sk and checks if we should loop the packet back to the local socket 3) ip6_skb_dst_mtu could query the settings from the user socket and force a wrong MTU Furthermore: In sk_mc_loop we could potentially land in WARN_ON(1) if we use a PF_PACKET socket ontop of an IPv6-backed vxlan device. Reuse xmit_recursion as we are currently only interested in protecting tunnel devices. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03netns: don't allocate an id for dead netnsNicolas Dichtel1-1/+3
First, let's explain the problem. Suppose you have an ipip interface that stands in the netns foo and its link part in the netns bar (so the netns bar has an nsid into the netns foo). Now, you remove the netns bar: - the bar nsid into the netns foo is removed - the netns exit method of ipip is called, thus our ipip iface is removed: => a netlink message is built in the netns foo to advertise this deletion => this netlink message requests an nsid for bar, thus a new nsid is allocated for bar and never removed. This patch adds a check in peernet2id() so that an id cannot be allocated for a netns which is currently destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03Revert "netns: don't clear nsid too early on removal"Nicolas Dichtel1-15/+9
This reverts commit 4217291e592d ("netns: don't clear nsid too early on removal"). This is not the right fix, it introduces races. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ip6mr: call del_timer_sync() in ip6mr_free_table()WANG Cong1-1/+1
We need to wait for the flying timers, since we are going to free the mrtable right after it. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net: move fib_rules_unregister() under rtnl lockWANG Cong6-5/+8
We have to hold rtnl lock for fib_rules_unregister() otherwise the following race could happen: fib_rules_unregister(): fib_nl_delrule(): ... ... ... ops = lookup_rules_ops(); list_del_rcu(&ops->list); list_for_each_entry(ops->rules) { fib_rules_cleanup_ops(ops); ... list_del_rcu(); list_del_rcu(); } Note, net->rules_mod_lock is actually not needed at all, either upper layer netns code or rtnl lock guarantees we are safe. Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanupWANG Cong1-0/+5
This is the IPv4 part for commit 905a6f96a1b1 (ipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanup). Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02tcp: fix FRTO undo on cumulative ACK of SACKed rangeNeal Cardwell1-3/+4
On processing cumulative ACKs, the FRTO code was not checking the SACKed bit, meaning that there could be a spurious FRTO undo on a cumulative ACK of a previously SACKed skb. The FRTO code should only consider a cumulative ACK to indicate that an original/unretransmitted skb is newly ACKed if the skb was not yet SACKed. The effect of the spurious FRTO undo would typically be to make the connection think that all previously-sent packets were in flight when they really weren't, leading to a stall and an RTO. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: e33099f96d99c ("tcp: implement RFC5682 F-RTO") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds13-28/+55
Pull networking fixes from David Miller: 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from Johannes Berg. 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry Finger. 3) Need to use for_each_netdev_safe() in rtnl_group_changelink() otherwise we can crash, from WANG Cong. 4) mlx4 driver does register_netdev() too early in the probe sequence, from Ido Shamay. 5) Don't allow router discovery hop limit to decrease the interface's hop limit, from D.S. Ljungmark. 6) tx_packets and tx_bytes improperly accounted for certain classes of USB network devices, fix from Ben Hutchings. 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr tables in the error path, they must instead use ip{6}mr_free_table(). Fix from WANG Cong. 8) cxgb4 doesn't properly quiesce all RX activity before unregistering the netdevice. Fix from Hariprasad Shenai. 9) Fix hash corruptions in ipvlan driver, from Jiri Benc. 10) nla_memcpy(), like a real memcpy, should fully initialize the destination buffer, even if the source attribute is smaller. Fix from Jiri Benc. 11) Fix wrong error code returned from iucv_sock_sendmsg(). We should use whatever sock_alloc_send_skb() put into 'err'. From Eugene Crosser. 12) Fix slab object leak on module unload in TIPC, from Ying Xue. 13) Need a READ_ONCE() when reading the cached RX socket route in tcp_v{4,6}_early_demux(). From Michal Kubecek. 14) Still too many problems with TPC support in the ath9k driver, so disable it for now. From Felix Fietkau. 15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from Larry Finger. 16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) cxgb4: Fix to dump devlog, even if FW is crashed cxgb4: Firmware macro changes for fw verison 1.13.32.0 bnx2x: Fix kdump when iommu=on bnx2x: Fix kdump on 4-port device mac80211: fix RX A-MPDU session reorder timer deletion MAINTAINERS: Update Intel Wired Ethernet Driver info tipc: fix a slab object leak net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet af_iucv: fix AF_IUCV sendmsg() errno openvswitch: Return vport module ref before destruction netlink: pad nla_memcpy dest buffer with zeroes bonding: Bonding Overriding Configuration logic restored. ipvlan: fix check for IP addresses in control path ipvlan: do not use rcu operations for address list ipvlan: protect against concurrent link removal ipvlan: fix addr hash list corruption net: fec: setup right value for mdio hold time net: tcp6: fix double call of tcp_v6_fill_cb() cxgb4vf: Fix sparse warnings netns: don't clear nsid too early on removal ...
2015-04-01Merge tag 'mac80211-for-davem-2015-04-01' of ↵David S. Miller3-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== This contains just a single fix for a crash I happened to randomly run into today during testing. It's clearly been around for a while, but is pretty hard to trigger, even when I tried explicitly (and modified the code to make it more likely) it rarely did. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linuxLinus Torvalds4-38/+32
Pull nfsd fixes from Bruce Fields: "Two main issues: - We found that turning on pNFS by default (when it's configured at build time) was too aggressive, so we want to switch the default before the 4.0 release. - Recent client changes to increase open parallelism uncovered a serious bug lurking in the server's open code. Also fix a krb5/selinux regression. The rest is mainly smaller pNFS fixes" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: sunrpc: make debugfs file creation failure non-fatal nfsd: require an explicit option to enable pNFS NFSD: Fix bad update of layout in nfsd4_return_file_layout NFSD: Take care the return value from nfsd4_encode_stateid NFSD: Printk blocklayout length and offset as format 0x%llx nfsd: return correct lockowner when there is a race on hash insert nfsd: return correct openowner when there is a race to put one in the hash NFSD: Put exports after nfsd4_layout_verify fail NFSD: Error out when register_shrinker() fail NFSD: Take care the return value from nfsd4_decode_stateid NFSD: Check layout type when returning client layouts NFSD: restore trace event lost in mismerge
2015-04-01mac80211: fix RX A-MPDU session reorder timer deletionJohannes Berg3-5/+12
There's an issue with the way the RX A-MPDU reorder timer is deleted that can cause a kernel crash like this: * tid_rx is removed - call_rcu(ieee80211_free_tid_rx) * station is destroyed * reorder timer fires before ieee80211_free_tid_rx() runs, accessing the station, thus potentially crashing due to the use-after-free The station deletion is protected by synchronize_net(), but that isn't enough -- ieee80211_free_tid_rx() need not have run when that returns (it deletes the timer.) We could use rcu_barrier() instead of synchronize_net(), but that's much more expensive. Instead, to fix this, add a field tracking that the session is being deleted. In this case, the only re-arming of the timer happens with the reorder spinlock held, so make that code not rearm it if the session is being deleted and also delete the timer after setting that field. This ensures the timer cannot fire after ___ieee80211_stop_rx_ba_session() returns, which fixes the problem. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-31tipc: fix a slab object leakYing Xue1-1/+1
When remove TIPC module, there is a warning to remind us that a slab object is leaked like: root@localhost:~# rmmod tipc [ 19.056226] ============================================================================= [ 19.057549] BUG TIPC (Not tainted): Objects remaining in TIPC on kmem_cache_close() [ 19.058736] ----------------------------------------------------------------------------- [ 19.058736] [ 19.060287] INFO: Slab 0xffffea0000519a00 objects=23 used=1 fp=0xffff880014668b00 flags=0x100000000004080 [ 19.061915] INFO: Object 0xffff880014668000 @offset=0 [ 19.062717] kmem_cache_destroy TIPC: Slab cache still has objects This is because the listening socket of TIPC topology server is not closed before TIPC proto handler is unregistered with proto_unregister(). However, as the socket is closed in tipc_exit_net() which is called by unregister_pernet_subsys() during unregistering TIPC namespace operation, the warning can be eliminated if calling unregister_pernet_subsys() is moved before calling proto_unregister(). Fixes: e05b31f4bf89 ("tipc: make tipc socket support net namespace") Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31af_iucv: fix AF_IUCV sendmsg() errnoEugene Crosser1-3/+1
When sending over AF_IUCV socket, errno was incorrectly set to ENOMEM even when other values where appropriate, notably EAGAIN. With this patch, error indicator returned by sock_alloc_send_skb() is passed to the caller, rather than being overwritten with ENOMEM. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31openvswitch: Return vport module ref before destructionThomas Graf1-3/+1
Return module reference before invoking the respective vport ->destroy() function. This is needed as ovs_vport_del() is not invoked inside an RCU read side critical section so the kfree can occur immediately before returning to ovs_vport_del(). Returning the module reference before ->destroy() is safe because the module unregistration is blocked on ovs_lock which we hold while destroying the datapath. Fixes: 62b9c8d0372d ("ovs: Turn vports with dependencies into separate modules") Reported-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31sunrpc: make debugfs file creation failure non-fatalJeff Layton4-38/+32
We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-29net: tcp6: fix double call of tcp_v6_fill_cb()Alexey Kodanev1-0/+11
tcp_v6_fill_cb() will be called twice if socket's state changes from TCP_TIME_WAIT to TCP_LISTEN. That can result in control buffer data corruption because in the second tcp_v6_fill_cb() call it's not copying IP6CB(skb) anymore, but 'seq', 'end_seq', etc., so we can get weird and unpredictable results. Performance loss of up to 1200% has been observed in LTP/vxlan03 test. This can be fixed by copying inet6_skb_parm to the beginning of 'cb' only if xfrm6_policy_check() and tcp_v6_fill_cb() are going to be called again. Fixes: 2dc49d1680b53 ("tcp6: don't move IP6CB before xfrm6_policy_check()") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29netns: don't clear nsid too early on removalNicolas Dichtel1-9/+15
With the current code, ids are removed too early. Suppose you have an ipip interface that stands in the netns foo and its link part in the netns bar (so the netns bar has an nsid into the netns foo). Now, you remove the netns bar: - the bar nsid into the netns foo is removed - the netns exit method of ipip is called, thus our ipip iface is removed: => a netlink message is sent in the netns foo to advertise this deletion => this netlink message requests an nsid for bar, thus a new nsid is allocated for bar and never removed. We must remove nsids when we are sure that nobody will refer to netns currently cleaned. Fixes: 0c7aecd4bde4 ("netns: add rtnl cmd to add and get peer netns ids") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29ipmr,ip6mr: call ip6mr_free_table() on failure pathWANG Cong2-2/+2
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25ipv6: Don't reduce hop limit for an interfaceD.S. Ljungmark1-1/+8
A local route may have a lower hop_limit set than global routes do. RFC 3756, Section 4.2.7, "Parameter Spoofing" > 1. The attacker includes a Current Hop Limit of one or another small > number which the attacker knows will cause legitimate packets to > be dropped before they reach their destination. > As an example, one possible approach to mitigate this threat is to > ignore very small hop limits. The nodes could implement a > configurable minimum hop limit, and ignore attempts to set it below > said limit. Signed-off-by: D.S. Ljungmark <ljungmark@modio.se> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24net: use for_each_netdev_safe() in rtnl_group_changelink()WANG Cong1-2/+2
In case we move the whole dev group to another netns, we should call for_each_netdev_safe(), otherwise we get a soft lockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798] irq event stamp: 255424 hardirqs last enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000 RIP: 0010:[<ffffffff810cad11>] [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30 RSP: 0018:ffff880119533778 EFLAGS: 00000246 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40 FS: 00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0 Stack: ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828 ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0 0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7 Call Trace: [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f [<ffffffff811ac8c9>] __fget+0x2a/0x7a [<ffffffff811ad2d7>] fget+0x13/0x15 [<ffffffff811be732>] proc_ns_fget+0xe/0x38 [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59 [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e [<ffffffff817df3d7>] do_setlink+0x73/0x87b [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699 [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699 [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33 [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a [<ffffffff8107da51>] ? ns_capable+0x4d/0x65 [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17 [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d [<ffffffff81830f18>] netlink_unicast+0xcb/0x150 [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523 [<ffffffff8115cba9>] ? might_fault+0x59/0xa9 [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255 [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac946>] ? __fget_light+0x2d/0x52 [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60 [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17 Fixes: e7ed828f10bd8 ("netlink: support setting devgroup parameters") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23tcp: prevent fetching dst twice in early demux codeMichal Kubeček2-2/+2
On s390x, gcc 4.8 compiles this part of tcp_v6_early_demux() struct dst_entry *dst = sk->sk_rx_dst; if (dst) dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie); to code reading sk->sk_rx_dst twice, once for the test and once for the argument of ip6_dst_check() (dst_check() is inline). This allows ip6_dst_check() to be called with null first argument, causing a crash. Protect sk->sk_rx_dst access by READ_ONCE() both in IPv4 and IPv6 TCP early demux code. Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Fixes: c7109986db3c ("ipv6: Early TCP socket demux") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller9-13/+51
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix missing initialization of tuple structure in nfnetlink_cthelper to avoid mismatches when looking up to attach userspace helpers to flows, from Ian Wilson. 2) Fix potential crash in nft_hash when we hit -EAGAIN in nft_hash_walk(), from Herbert Xu. 3) We don't need to indicate the hook information to update the basechain default policy in nf_tables. 4) Restore tracing over nfnetlink_log due to recent rework to accomodate logging infrastructure into nf_tables. 5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY. 6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and REJECT6 from xt over nftables. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-22netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is setPablo Neira Ayuso1-0/+6
ip6tables extensions check for this flag to restrict match/target to a given protocol. Without this flag set, SYNPROXY6 returns an error. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net>
2015-03-20net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfromAl Viro1-0/+4
Cc: stable@vger.kernel.org # v3.19 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() ↵Catalin Marinas1-0/+7
behaviour Commit db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an error) introduced the clamping of msg_namelen when the unsigned value was larger than sizeof(struct sockaddr_storage). This caused a msg_namelen of -1 to be valid. The native code was subsequently fixed by commit dbb490b96584 (net: socket: error on a negative msg_namelen). In addition, the native code sets msg_namelen to 0 when msg_name is NULL. This was done in commit (6a2a2b3ae075 net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland) and subsequently updated by 08adb7dabd48 (fold verify_iovec() into copy_msghdr_from_user()). This patch brings the get_compat_msghdr() in line with copy_msghdr_from_user(). Fixes: db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an error) Cc: David S. Miller <davem@davemloft.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20tcp: fix tcp fin memory accountingJosh Hunt1-5/+1
tcp_send_fin() does not account for the memory it allocates properly, so sk_forward_alloc can be negative in cases where we've sent a FIN: ss example output (ss -amn | grep -B1 f4294): tcp FIN-WAIT-1 0 1 192.168.0.1:45520 192.0.2.1:8080 skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0) Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20ipv6: fix backtracking for throw routesSteven Barth1-0/+1
for throw routes to trigger evaluation of other policy rules EAGAIN needs to be propagated up to fib_rules_lookup similar to how its done for IPv4 A simple testcase for verification is: ip -6 rule add lookup 33333 priority 33333 ip -6 route add throw 2001:db8::1 ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333 ip route get 2001:db8::1 Signed-off-by: Steven Barth <cyrus@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in ↵Sabrina Dubroca1-5/+3
udp6_ufo_fragment Matt Grant reported frequent crashes in ipv6_select_ident when udp6_ufo_fragment is called from openvswitch on a skb that doesn't have a dst_entry set. ipv6_proxy_select_ident generates the frag_id without using the dst associated with the skb. This approach was suggested by Vladislav Yasevich. Fixes: 0508c07f5e0c ("ipv6: Select fragment id during UFO segmentation if not set.") Cc: Vladislav Yasevich <vyasevic@redhat.com> Reported-by: Matt Grant <matt@mattgrant.net.nz> Tested-by: Matt Grant <matt@mattgrant.net.nz> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()Pablo Neira Ayuso1-2/+2
We have to check for IP6T_INV_PROTO in invflags, instead of flags. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Balazs Scheidler <bazsi@balabit.hu>
2015-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds26-86/+189
Pull networking fixes from David Miller: 1) Fix packet header offset calculation in _decode_session6(), from Hajime Tazaki. 2) Fix route leak in error paths of xfrm_lookup(), from Huaibin Wang. 3) Be sure to clear state properly when scans fail in iwlwifi mvm code, from Luciano Coelho. 4) iwlwifi tries to stop scans that aren't actually running, also from Luciano Coelho. 5) mac80211 should drop mesh frames that are not encrypted, fix from Bob Copeland. 6) Add new device ID to b43 wireless driver for BCM432228 chips, from Rafał Miłecki. 7) Fix accidental addition of members after variable sized array in struct tc_u_hnode, from WANG Cong. 8) Don't re-enable interrupts until after we call napi_complete() in ibmveth and WIZnet drivers, frm Yongbae Park. 9) Fix regression in vlan tag handling of fec driver, from Fugang Duan. 10) If a network namespace change fails during rtnl_newlink(), we don't unwind the device registry properly. 11) Fix two TCP regressions, from Neal Cardwell: - Don't allow snd_cwnd_cnt to accumulate huge values due to missing test in tcp_cong_avoid_ai(). - Restore CUBIC back to advancing cwnd by 1.5x packets per RTT. 12) Fix performance regression in xne-netback involving push TX notifications, from David Vrabel. 13) __skb_tstamp_tx() can be called with a NULL sk pointer, do not dereference blindly. From Willem de Bruijn. 14) Fix potential stack overflow in RDS protocol stack, from Arnd Bergmann. 15) VXLAN_VID_MASK used incorrectly in new remote checksum offload support of VXLAN driver. Fix from Alexey Kodanev. 16) Fix too small netlink SKB allocation in inet_diag layer, from Eric Dumazet. 17) ieee80211_check_combinations() does not count interfaces correctly, from Andrei Otcheretianski. 18) Hardware feature determination in bxn2x driver references a piece of software state that actually isn't initialized yet, fix from Michal Schmidt. 19) inet_csk_wait_for_connect() needs a sched_annotate_sleep() annoation, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) Revert "net: cx82310_eth: use common match macro" net/mlx4_en: Set statistics bitmap at port init IB/mlx4: Saturate RoCE port PMA counters in case of overflow net/mlx4_en: Fix off-by-one in ethtool statistics display IB/mlx4: Verify net device validity on port change event act_bpf: allow non-default TC_ACT opcodes as BPF exec outcome Revert "smc91x: retrieve IRQ and trigger flags in a modern way" inet: Clean up inet_csk_wait_for_connect() vs. might_sleep() ip6_tunnel: fix error code when tunnel exists netdevice.h: fix ndo_bridge_* comments bnx2x: fix encapsulation features on 57710/57711 mac80211: ignore CSA to same channel nl80211: ignore HT/VHT capabilities without QoS/WMM mac80211: ask for ECSA IE to be considered for beacon parse CRC mac80211: count interfaces correctly for combination checks isdn: icn: use strlcpy() when parsing setup options rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg() caif: fix MSG_OOB test in caif_seqpkt_recvmsg() bridge: reset bridge mtu after deleting an interface can: kvaser_usb: Fix tx queue start/stop race conditions ...
2015-03-19netfilter: restore rule tracing via nfnetlink_logPablo Neira Ayuso4-10/+34
Since fab4085 ("netfilter: log: nf_log_packet() as real unified interface"), the loginfo structure that is passed to nf_log_packet() is used to explicitly indicate the logger type you want to use. This is a problem for people tracing rules through nfnetlink_log since packets are always routed to the NF_LOG_TYPE logger after the aforementioned patch. We can fix this by removing the trace loginfo structures, but that still changes the log level from 4 to 5 for tracing messages and there may be someone relying on this outthere. So let's just introduce a new nf_log_trace() function that restores the former behaviour. Reported-by: Markus Kötter <koetter@rrzn.uni-hannover.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-17act_bpf: allow non-default TC_ACT opcodes as BPF exec outcomeDaniel Borkmann1-8/+28
Revisiting commit d23b8ad8ab23 ("tc: add BPF based action") with regards to eBPF support, I was thinking that it might be better to improve return semantics from a BPF program invoked through BPF_PROG_RUN(). Currently, in case filter_res is 0, we overwrite the default action opcode with TC_ACT_SHOT. A default action opcode configured through tc's m_bpf can be: TC_ACT_RECLASSIFY, TC_ACT_PIPE, TC_ACT_SHOT, TC_ACT_UNSPEC, TC_ACT_OK. In cls_bpf, we have the possibility to overwrite the default class associated with the classifier in case filter_res is _not_ 0xffffffff (-1). That allows us to fold multiple [e]BPF programs into a single one, where they would otherwise need to be defined as a separate classifier with its own classid, needlessly redoing parsing work, etc. Similarly, we could do better in act_bpf: Since above TC_ACT* opcodes are exported to UAPI anyway, we reuse them for return-code-to-tc-opcode mapping, where we would allow above possibilities. Thus, like in cls_bpf, a filter_res of 0xffffffff (-1) means that the configured _default_ action is used. Any unkown return code from the BPF program would fail in tcf_bpf() with TC_ACT_UNSPEC. Should we one day want to make use of TC_ACT_STOLEN or TC_ACT_QUEUED, which both have the same semantics, we have the option to either use that as a default action (filter_res of 0xffffffff) or non-default BPF return code. All that will allow us to transparently use tcf_bpf() for both BPF flavours. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17inet: Clean up inet_csk_wait_for_connect() vs. might_sleep()Eric Dumazet1-0/+1
I got the following trace with current net-next kernel : [14723.885290] WARNING: CPU: 26 PID: 22658 at kernel/sched/core.c:7285 __might_sleep+0x89/0xa0() [14723.885325] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810e8734>] prepare_to_wait_exclusive+0x34/0xa0 [14723.885355] CPU: 26 PID: 22658 Comm: netserver Not tainted 4.0.0-dbg-DEV #1379 [14723.885359] ffffffff81a223a8 ffff881fae9e7ca8 ffffffff81650b5d 0000000000000001 [14723.885364] ffff881fae9e7cf8 ffff881fae9e7ce8 ffffffff810a72e7 0000000000000000 [14723.885367] ffffffff81a57620 000000000000093a 0000000000000000 ffff881fae9e7e64 [14723.885371] Call Trace: [14723.885377] [<ffffffff81650b5d>] dump_stack+0x4c/0x65 [14723.885382] [<ffffffff810a72e7>] warn_slowpath_common+0x97/0xe0 [14723.885386] [<ffffffff810a73e6>] warn_slowpath_fmt+0x46/0x50 [14723.885390] [<ffffffff810f4c5d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [14723.885393] [<ffffffff810e8734>] ? prepare_to_wait_exclusive+0x34/0xa0 [14723.885396] [<ffffffff810e8734>] ? prepare_to_wait_exclusive+0x34/0xa0 [14723.885399] [<ffffffff810ccdc9>] __might_sleep+0x89/0xa0 [14723.885403] [<ffffffff81581846>] lock_sock_nested+0x36/0xb0 [14723.885406] [<ffffffff815829a3>] ? release_sock+0x173/0x1c0 [14723.885411] [<ffffffff815ea1f7>] inet_csk_accept+0x157/0x2a0 [14723.885415] [<ffffffff810e8900>] ? abort_exclusive_wait+0xc0/0xc0 [14723.885419] [<ffffffff8161b96d>] inet_accept+0x2d/0x150 [14723.885424] [<ffffffff8157db6f>] SYSC_accept4+0xff/0x210 [14723.885428] [<ffffffff8165a451>] ? retint_swapgs+0xe/0x44 [14723.885431] [<ffffffff810f4c5d>] ? trace_hardirqs_on_caller+0x10d/0x1d0 [14723.885437] [<ffffffff81369c0e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [14723.885441] [<ffffffff8157ef40>] SyS_accept+0x10/0x20 [14723.885444] [<ffffffff81659872>] system_call_fastpath+0x12/0x17 [14723.885447] ---[ end trace ff74cd83355b1873 ]--- In commit 26cabd31259ba43f68026ce3f62b78094124333f Peter added a sched_annotate_sleep() in sk_wait_event() Is the following patch needed as well ? Alternative would be to use sk_wait_event() from inet_csk_wait_for_connect() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17ip6_tunnel: fix error code when tunnel existsNicolas Dichtel1-16/+17
After commit 2b0bb01b6edb, the kernel returns -ENOBUFS when user tries to add an existing tunnel with ioctl API: $ ip -6 tunnel add ip6tnl1 mode ip6ip6 dev eth1 add tunnel "ip6tnl0" failed: No buffer space available It's confusing, the right error is EEXIST. This patch also change a bit the code returned: - ENOBUFS -> ENOMEM - ENOENT -> ENODEV Fixes: 2b0bb01b6edb ("ip6_tunnel: Return an error when adding an existing tunnel.") CC: Steffen Klassert <steffen.klassert@secunet.com> Reported-by: Pierre Cheynier <me@pierre-cheynier.net> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-4/+20
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio fixes from Rusty Russell: "Not entirely surprising: the ongoing QEMU work on virtio 1.0 has revealed more minor issues with our virtio 1.0 drivers just introduced in the kernel. (I would normally use my fixes branch for this, but there were a batch of them...)" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_mmio: fix access width for mmio uapi/virtio_scsi: allow overriding CDB/SENSE size virtio_mmio: generation support virtio_rpmsg: set DRIVER_OK before using device 9p/trans_virtio: fix hot-unplug virtio-balloon: do not call blocking ops when !TASK_RUNNING virtio_blk: fix comment for virtio 1.0 virtio_blk: typo fix virtio_balloon: set DRIVER_OK before using device virtio_console: avoid config access from irq virtio_console: init work unconditionally
2015-03-17netfilter: nf_tables: allow to change chain policy without hook if it existsPablo Neira Ayuso1-1/+4
If there's an existing base chain, we have to allow to change the default policy without indicating the hook information. However, if the chain doesn't exists, we have to enforce the presence of the hook attribute. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-16Merge tag 'mac80211-for-davem-2015-03-16' of ↵David S. Miller5-8/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are a few fixes that I'd like to still get in: * disable U-APSD for better interoperability, from Michal Kazior * drop unencrypted frames in mesh forwarding, from Bob Copeland * treat non-QoS/WMM HT stations as non-HT, to fix confusion when they connect and then get QoS packets anyway due to HT * fix counting interfaces for combination checks, otherwise the interface combinations aren't properly enforced (from Andrei) * fix pure ECSA by reacting to the IE change * ignore erroneous (E)CSA to the current channel which sometimes happens due to AP/GO bugs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Merge branch 'master' of ↵David S. Miller4-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2015-03-16 1) Fix the network header offset in _decode_session6 when multiple IPv6 extension headers are present. From Hajime Tazaki. 2) Fix an interfamily tunnel crash. We set outer mode protocol too early and may dispatch to the wrong address family. Move the setting of the outer mode protocol behind the last accessing of the inner mode to fix the crash. 3) Most callers of xfrm_lookup() expect that dst_orig is released on error. But xfrm_lookup_route() may need dst_orig to handle certain error cases. So introduce a flag that tells what should be done in case of error. From Huaibin Wang. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16mac80211: ignore CSA to same channelJohannes Berg2-0/+14
If the AP is confused and starts doing a CSA to the same channel, just ignore that request instead of trying to act it out since it was likely sent in error anyway. In the case of the bug I was investigating the GO was misbehaving and sending out a beacon with CSA IEs still included after having actually done the channel switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16nl80211: ignore HT/VHT capabilities without QoS/WMMJohannes Berg1-0/+10
As HT/VHT depend heavily on QoS/WMM, it's not a good idea to let userspace add clients that have HT/VHT but not QoS/WMM. Since it does so in certain cases we've observed (client is using HT IEs but not QoS/WMM) just ignore the HT/VHT info at this point and don't pass it down to the drivers which might unconditionally use it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16mac80211: ask for ECSA IE to be considered for beacon parse CRCJohannes Berg1-1/+2
When a beacon from the AP contains only the ECSA IE, and not a CSA IE as well, this ECSA IE is not considered for calculating the CRC and the beacon might be dropped as not being interesting. This is clearly wrong, it should be handled and the channel switch should be executed. Fix this by including the ECSA IE ID in the bitmap of interesting IEs. Reported-by: Gil Tribush <gil.tribush@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16mac80211: count interfaces correctly for combination checksAndrei Otcheretianski1-1/+1
Since moving the interface combination checks to mac80211, it's broken because it now only considers interfaces with an assigned channel context, so for example any interface that isn't active can still be up, which is clearly an issue; also, in particular P2P-Device wdevs are an issue since they never have a chanctx. Fix this by counting running interfaces instead the ones with a channel context assigned. Cc: stable@vger.kernel.org [3.16+] Fixes: 73de86a38962b ("cfg80211/mac80211: move interface counting for combination check to mac80211") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [rewrite commit message, dig out the commit it fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-15rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg()Al Viro1-1/+1
[I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15caif: fix MSG_OOB test in caif_seqpkt_recvmsg()Al Viro1-1/+1
It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14bridge: reset bridge mtu after deleting an interfaceVenkat Venkatsubra1-0/+2
On adding an interface br_add_if() sets the MTU to the min of all the interfaces. Do the same thing on removing an interface too in br_del_if. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13inet_diag: fix possible overflow in inet_diag_dump_one_icsk()Eric Dumazet1-3/+15
inet_diag_dump_one_icsk() allocates too small skb. Add inet_sk_attr_size() helper right before inet_sk_diag_fill() so that it can be updated if/when new attributes are added. iproute2/ss currently does not use this dump_one() interface, this might explain nobody noticed this problem yet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13netfilter: Fix potential crash in nft_hash walkerHerbert Xu1-0/+2
When we get back an EAGAIN from rhashtable_walk_next we were treating it as a valid object which obviously doesn't work too well. Luckily this is hard to trigger so it seems nobody has run into it yet. This patch fixes it by redoing the next call when we get an EAGAIN. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 00:47:54 +0000