summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2014-11-19mac80211: introduce TDLS channel switch opsArik Nemtsov9-5/+362
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add parsing of TDLS specific IEsArik Nemtsov2-0/+18
These are used in TDLS channel switching code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: introduce TDLS channel switch commandsArik Nemtsov4-0/+178
Introduce commands to initiate and cancel TDLS channel-switching. Once TDLS channel-switching is started, the lower level driver is responsible for continually initiating channel-switch operations and returning to the base (AP) channel to listen for beacons from time to time. Upon cancellation of the channel-switch all communication between the relevant TDLS peers will continue on the base channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: prepare TDLS mgmt code for channel-switch templatesArik Nemtsov1-25/+57
Split the data-generating from the Tx-sending functionality, as we do not want to send templates to the lower driver. Also add an optional chandef argument to the data-generating portion. It will be used for channel-switch templates. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: track AP and peer STA TDLS chan-switch supportArik Nemtsov6-2/+23
The AP or peer can prohibit TDLS channel switch via a bit in the extended capabilities IE. Parse the IE and track this bit. Set an appropriate STA flag if both the AP and peer STA support TDLS channel-switching. Add the new STA flag and the missing TDLS_INITIATOR to debugfs. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg/mac80211: define TDLS channel switch feature bitArik Nemtsov1-3/+6
Define some related TDLS protocol constants and advertise channel switch support in the extended-capabilities IE when the feature bit is defined. Actually supporting TDLS channel-switching also requires support for some new nl80211 commands, to be introduced by future patches. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add BSS coex IE to TDLS setup framesArik Nemtsov1-0/+15
Add the BSS coex IE in case we support HT40 channels, as mandated by section 8.5.13 in IEEE802.11 2012. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add supported channels IE during TDLS setupArik Nemtsov1-0/+71
This information element is mandatory in case TDLS channel-switching is to be supported. The channels given are ones supported and allowed to be active in the current regulatory setting. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add function to create data frame template including keyJohannes Berg2-0/+34
For some TDLS channel switch implementations data frames need to be sent by the firmware based on a template. This template should be created by mac80211, and thus needs to properly be built from an 802.3 frame into an 802.11 frame. In addition, the device will need the key information so the select_key handler needs to be run. However, the driver/device will be responsible for all of the crypto encapsulation, as the sequence numbers etc. cannot be built by the host anyway in this case since it's a template to be used multiple times. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: factor out 802.11 header building codeJohannes Berg1-52/+92
Factor out the 802.11 header building code from the xmit function to be able to use it separately in a later commit. While at it, fix up some documentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: move skb info band assignment outJohannes Berg4-16/+16
Instead of passing the band as a parameter to ieee80211_xmit() and ieee80211_tx(), move it outside of the two functions while making sure info->band is set up before calling them. This removes the parameter and simplifies the follow commit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: retransmit TDLS teardown packet through AP if not ACKedLiad Kaufman4-13/+117
Since the TDLS peer station might not receive the teardown packet (e.g., when in PS), this makes sure the packet is retransmitted - this time through the AP - if the TDLS peer didn't ACK the packet. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add option for setting skb flags before xmitLiad Kaufman2-8/+16
Allows setting of an skb's flags - if needed - when calling ieee80211_subif_start_xmit(). Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-18Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg125-2997/+3054
This brings in some mwifiex changes that further patches will need to work on top to not cause merge conflicts. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-11Merge branch 'for-upstream' of ↵John W. Linville27-628/+536
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-11-11mac80211: refactor duplicate detectionJohannes Berg1-5/+20
Put duplicate detection into its own RX handler, and separate out the conditions a bit to make the code more readable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10cfg80211: introduce regulatory flags controlling bwArik Nemtsov1-2/+34
Allow setting bandwidth related regulatory flags. These flags are mapped to the corresponding channel flags in the specified range. Make sure the new flags are consulted when calculating the maximum bandwidth allowed by a regulatory-rule. Also allow propagating the GO_CONCURRENT modifier from a reg-rule to a channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: add back support for radiotap vendor namespace dataJohannes Berg1-18/+82
Radiotap vendor namespace data might still be useful, but we reverted it because it used too much space in the RX status. Put it back, but address the space problem by using a single bit only and putting everything else into the skb->data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10cfg80211/mac80211: allow any interface to send channel switch notificationsLuciano Coelho2-6/+2
For multi-vif channel switches, we want to send NL80211_CMD_CH_SWITCH_NOTIFY to the userspace to let it decide whether other interfaces need to be moved as well. This is needed when we want a P2P GO interface to follow the channel of a station, for example. Modify the code so that all interfaces can send CSA notifications. Additionally, send notifications for STA CSA as well. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: send channel switch started notificationsLuciano Coelho2-0/+6
Send a channel switch notification to userspace when a channel switch is requested or when we react to a remote CSA. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10cfg80211: add channel switch started notificationLuciano Coelho2-3/+41
Add a new NL80211_CH_SWITCH_STARTED_NOTIFY message that can be sent to the userspace when a channel switch process has started. This allows userspace to take action, for instance, by requesting other interfaces to switch channel as necessary. This patch introduces a function that allows the drivers to send this notification. It should be used when the driver starts processing a channel switch initiated by a remote device (eg. when a STA receives a CSA from the AP) and when it successfully starts a userspace-triggered channel switch (eg. when hostapd triggers a channel swith in the AP). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: add device_timestamp to the drv_pre_channel_switch traceLuciano Coelho1-0/+2
The device_timestamp value was left out of the event trace for drv_pre_channel_switch by mistake. Add it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: fix order of setting ch_switch and drv_pre_channel_switch callLuciano Coelho1-6/+6
There was a mistake when merging commit 6d027bcc (mac80211: add pre_channel_switch driver operation) for upstream. The assignment of the values in the ch_switch structure came below the call to drv_pre_channel_switch. Fix the order. Fixes: 6d027bcc (mac80211: add pre_channel_switch driver operation) Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-066lowpan: move skb_free from error paths in decompressionMartin Townsend3-37/+25
Currently we ensure that the skb is freed on every error path in IPHC decompression which makes it easy to introduce skb leaks. By centralising the skb_free into the receive function it makes future decompression routines easier to maintain. It does come at the expense of ensuring that the skb passed into the decompression routine must not be copied. Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-06Bluetooth: Sort switch cases by opcode's numeric valueKuba Pawlak1-12/+12
Opcodes in switch/case in hci_cmd_status_evt are not sorted by value. This patch restores proper ordering. Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-06Bluetooth: Clear role switch pending flagKuba Pawlak1-0/+27
If role switch was rejected by the controller and HCI Event: Command Status returned with status "Command Disallowed" (0x0C) the flag HCI_CONN_RSWITCH_PEND remains set. No further role switches are possible as this flag prevents us from sending any new HCI Switch Role requests and the only way to clear it is to receive a valid HCI Event Switch Role. This patch clears the flag if command was rejected. 2013-01-01 00:03:44.209913 < HCI Command: Switch Role (0x02|0x000b) plen 7 bdaddr BC:C6:DB:C4:6F:79 role 0x00 Role: Master 2013-01-01 00:03:44.210867 > HCI Event: Command Status (0x0f) plen 4 Switch Role (0x02|0x000b) status 0x0c ncmd 1 Error: Command Disallowed Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: fix typo promisuous to promiscuousAlexander Aring2-4/+4
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: use IEEE802154_EXTENDED_ADDR_LENAlexander Aring1-3/+2
This patch removes the af_ieee802154 defines and use the IEEE802154_EXTENDED_ADDR_LEN. We should do this everywhere in the 802.15.4 subsystem because af_ieee802154 should be normally an uapi header. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: add support for perm_extended_addrAlexander Aring1-0/+4
This patch adding support for a perm extended address. This is useful when a device supports an eeprom with a programmed static extended address. If a device doesn't support such eeprom or serial registers then the driver should generate a random extended address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: cleanup ieee802154_netdev_to_extended_addrAlexander Aring1-1/+1
This patch cleanups the ieee802154_be64_to_le64 to have a similar function like ieee802154_le64_to_be64 only with switched source and destionation types. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: add ieee802154_vif structAlexander Aring3-8/+10
This patch adds an ieee802154_vif similar like the ieee80211_vif which holds the interface type and maybe further more attributes like the ieee80211_vif structure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: add default interface registrationAlexander Aring1-0/+12
This patch adds a default interface registration for a wpan interface type. Currently the 802.15.4 subsystem need to call userspace tools to add an interface. This patch is like mac80211 handling for registration a station interface type by default. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: remove mlme get_phy callbackAlexander Aring5-26/+6
This patch removes the get_phy callback from mlme ops structure. Instead we doing a dereference via ieee802154_ptr dev pointer. For backwards compatibility we need to run get_device after dereference wpan_phy via ieee802154_ptr. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: rework interface registrationAlexander Aring3-82/+88
This patch meld mac802154_netdev_register into ieee802154_if_add function. Also we have now only one alloc_netdev call with one interface setup routine "ieee802154_if_setup" instead two different one for each interface type. This patch checks via runtime the interface type and do different handling now. Additional we add the wpan_dev struct in ieee802154_sub_if_data and set the new ieee802154_ptr while netdev registration. This behaviour is very similar the mac80211 netdev registration functionality. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: move dev_hold out of ieee802154_if_addAlexander Aring2-1/+1
This patch moves the dev_hold call inside of nl-phy ieee802154_add_iface function. The ieee802154_add_iface is the only one function which use the ieee802154_if_add function and contains the corresponding dev_put call. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: move interface add handling in ifaceAlexander Aring4-68/+72
This patch moves and renames the mac802154_add_iface and mac802154_netdev_register functions into iface.c. The function mac802154_add_iface is renamed to ieee802154_if_add which is a similar naming convention like mac80211. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: move interface del handling in ifaceAlexander Aring4-18/+16
This patch moves and rename the mac802154_del_iface function into iface.c and rename the function to ieee802154_if_remove which is a similar naming convention like mac80211. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: remove nl802154 unused functionsAlexander Aring2-187/+6
The include/net/nl802154.h file contains a lot of prototypes which are not used inside of ieee802154 subsystem. This patch removes this file and make the only one used prototype "ieee802154_nl_start_confirm" as static declaration in ieee802154/nl-mac.c Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: rework wpan_phy index assignmentAlexander Aring2-19/+14
This patch reworks the wpan_phy index incrementation. It's now similar like wireless wiphy index incrementation. We move the wpan_phy index attribute inside of cfg802154_registered_device and use atomic operations instead locking mechanism via wpan_phy_mutex. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-04Merge tag 'mac80211-next-for-john-2014-11-04' of ↵John W. Linville44-305/+2048
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This relatively large batch of changes is comprised of the following: * large mac80211-hwsim changes from Ben, Jukka and a bit myself * OCB/WAVE/11p support from Rostislav on behalf of the Czech Technical University in Prague and Volkswagen Group Research * minstrel VHT work from Karl * more CSA work from Luca * WMM admission control support in mac80211 (myself) * various smaller fixes, spelling corrections, and minor API additions" Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-046lowpan: fix udp header compression when using raw socketsSimon Vincent1-1/+9
If you use RAW sockets the transport header offset is not set by the ipv6 stack so when we get to the udp header compression it does not compress the right part of the packet. This patch adds a check for this scenario and sets the transport header offset. Signed-off-by: Simon Vincent <simon.vincent@xsilon.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-04cfg80211: fix nl80211 cmd id in nl80211_send_mpath()Henning Rogge1-1/+1
Netlink command for nl80211_send_mpath() should be NL80211_CMD_NEW_MPATH. Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: replace restart_complete() with reconfig_complete()Eliad Peller3-8/+30
Drivers might want to know also when mac80211 has completed reconfiguring after resume (e.g. in order to know when frames can be passed to mac80211). Rename restart_complete() to a more-generic reconfig_complete(), and add a new enum to indicate the reconfiguration type. Update the current users with the new prototype. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: increase U-APSD max service period lengthAndrei Otcheretianski1-1/+1
Deliver up to 128 frames during service period instead of 8 if unlimited is specified by the client during association. 8 was just an arbitrary value; so is 128 since unlimited can be any number. However for large traffic bursts, increasing this value looks reasonable. Also, it seems that a few certification tests expect more frames to be delivered during SP. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: handle RIC data element in reassociation requestJohannes Berg3-7/+50
When the RIC data element (RDE) is included in the IEs coming from userspace for an association request, its handling is currently broken as any IEs that are contained within it would be split off from it and inserted again after all the IEs that mac80211 generates (e.g. HT, VHT.) To fix this, treat the RIC element specially, and stop after it only when we find something that doesn't actually belong to it. This assumes userspace is actually correctly building it, directly after the fast BSS transition IE and before all the others like extended capabilities. This leaves as a potential problem the case where userspace is building the following IEs: [RDE] [vendor resource description] [vendor non-resource IE] In this case, we'd erroneously consider all three IEs to be part of the RIC data together, and not split them between the two vendor IEs. Unfortunately, it isn't easily possible to distinguish vendor IEs, so this isn't easy to fix. Luckily, this case is rare as normally wpa_supplicant will include an extended capabilities IE in the IEs, and that certainly will break the two vendor IEs apart correctly. Reviewed-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: 802.11p OCB mode supportRostislav Lisovy13-9/+415
This patch adds 802.11p OCB (Outside the Context of a BSS) mode support. When communicating in OCB mode a mandatory wildcard BSSID (48 '1' bits) is used. The EDCA parameters handling function was changed to support 802.11p specific values. The insertion of a newly discovered STAs is done in the similar way as in the IBSS mode -- through the deferred insertion. The OCB mode uses a periodic 'housekeeping task' for expiration of disconnected STAs (in the similar manner as in the MESH mode). New Kconfig option for verbose OCB debugging outputs is added. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04cfg80211: 802.11p OCB mode handlingRostislav Lisovy13-2/+208
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: add support for driver tx power reportingFelix Fietkau3-0/+44
The configured tx power is often limited by hardware capabilities, channel settings, antenna configuration, etc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix tracing compilation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04Bluetooth: Fix sparse warnings in RFCOMMJohan Hedberg1-2/+4
This patch fixes the following sparse warnings in rfcomm/core.c: net/bluetooth/rfcomm/core.c:391:16: warning: dubious: x | !y net/bluetooth/rfcomm/core.c:546:24: warning: dubious: x | !y Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-03Bluetooth: Fix invalid response for 'Start Discovery' commandSzymon Janc1-21/+35
According to Management Interface API 'Start Discovery' command should generate a Command Complete event on failure. Currently kernel is sending Command Status on early errors. This results in userspace ignoring such event due to invalid size. bluetoothd[28499]: src/adapter.c:trigger_start_discovery() bluetoothd[28499]: src/adapter.c:cancel_passive_scanning() bluetoothd[28499]: src/adapter.c:start_discovery_timeout() bluetoothd[28499]: src/adapter.c:start_discovery_complete() status 0x0a bluetoothd[28499]: Wrong size of start discovery return parameters Reported-by: Jukka Taimisto <jtt@codenomicon.com> Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-03 05:12:00 +0000