summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2018-04-07kbuild: rename *-asn1.[ch] to *.asn1.[ch]Masahiro Yamada2-3/+3
Our convention is to distinguish file types by suffixes with a period as a separator. *-asn1.[ch] is a different pattern from other generated sources such as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with '-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in files: net/netfilter/nf_conntrack_h323_asn1.c include/linux/netfilter/nf_conntrack_h323_asn1.h include/linux/sunrpc/gss_asn1.h Rename generated files to *.asn1.[ch] for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07kbuild: clean up *-asn1.[ch] patterns from top-level MakefileMasahiro Yamada1-1/+0
Clean up these patterns from the top Makefile to omit 'clean-files' in each Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-06Merge tag 'selinux-pr-20180403' of ↵Linus Torvalds8-27/+215
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux updates from Paul Moore: "A bigger than usual pull request for SELinux, 13 patches (lucky!) along with a scary looking diffstat. Although if you look a bit closer, excluding the usual minor tweaks/fixes, there are really only two significant changes in this pull request: the addition of proper SELinux access controls for SCTP and the encapsulation of a lot of internal SELinux state. The SCTP changes are the result of a multi-month effort (maybe even a year or longer?) between the SELinux folks and the SCTP folks to add proper SELinux controls. A special thanks go to Richard for seeing this through and keeping the effort moving forward. The state encapsulation work is a bit of janitorial work that came out of some early work on SELinux namespacing. The question of namespacing is still an open one, but I believe there is some real value in the encapsulation work so we've split that out and are now sending that up to you" * tag 'selinux-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: wrap AVC state selinux: wrap selinuxfs state selinux: fix handling of uninitialized selinux state in get_bools/classes selinux: Update SELinux SCTP documentation selinux: Fix ltp test connect-syscall failure selinux: rename the {is,set}_enforcing() functions selinux: wrap global selinux state selinux: fix typo in selinux_netlbl_sctp_sk_clone declaration selinux: Add SCTP support sctp: Add LSM hooks sctp: Add ip option support security: Add support for SCTP security hooks netlabel: If PF_INET6, check sk_buff ip header version
2018-04-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-5/+8
Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - the v9fs maintainers have been missing for a long time. I've taken over v9fs patch slinging. - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits) mm,oom_reaper: check for MMF_OOM_SKIP before complaining mm/ksm: fix interaction with THP mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t headers: untangle kmemleak.h from mm.h include/linux/mmdebug.h: make VM_WARN* non-rvals mm/page_isolation.c: make start_isolate_page_range() fail if already isolated mm: change return type to vm_fault_t mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory kernel/fork.c: detect early free of a live mm mm: make counting of list_lru_one::nr_items lockless mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static block_invalidatepage(): only release page if the full page was invalidated mm: kernel-doc: add missing parameter descriptions mm/swap.c: remove @cold parameter description for release_pages() mm/nommu: remove description of alloc_vm_area zram: drop max_zpage_size and use zs_huge_class_size() zsmalloc: introduce zs_huge_class_size() mm: fix races between swapoff and flush dcache fs/direct-io.c: minor cleanups in do_blockdev_direct_IO ...
2018-04-05headers: untangle kmemleak.h from mm.hRandy Dunlap2-2/+0
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05net/9p/client.c: fix potential refcnt problem of trans moduleChengguang Xu1-1/+4
When specifying trans_mod multiple times in a mount, it will cause an inaccurate refcount of the trans module. Also, in the error case of option parsing, we should put the trans module if we have already got it. Link: http://lkml.kernel.org/r/1522154942-57339-1-git-send-email-cgxu519@gmx.com Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05net/9p: avoid -ERESTARTSYS leak to userspaceGreg Kurz1-2/+4
If it was interrupted by a signal, the 9p client may need to send some more requests to the server for cleanup before returning to userspace. To avoid such a last minute request to be interrupted right away, the client memorizes if a signal is pending, clears TIF_SIGPENDING, handles the request and calls recalc_sigpending() before returning. Unfortunately, if the transmission of this cleanup request fails for any reason, the transport returns an error and the client propagates it right away, without calling recalc_sigpending(). This ends up with -ERESTARTSYS from the initially interrupted request crawling up to syscall exit, with TIF_SIGPENDING cleared by the cleanup request. The specific signal handling code, which is responsible for converting -ERESTARTSYS to -EINTR is not called, and userspace receives the confusing errno value: open: Unknown error 512 (512) This is really hard to hit in real life. I discovered the issue while working on hot-unplug of a virtio-9p-pci device with an instrumented QEMU allowing to control request completion. Both p9_client_zc_rpc() and p9_client_rpc() functions have this buggy error path actually. Their code flow is a bit obscure and the best thing to do would probably be a full rewrite: to really ensure this situation of clearing TIF_SIGPENDING and returning -ERESTARTSYS can never happen. But given the general lack of interest for the 9p code, I won't risk breaking more things. So this patch simply fixes the buggy paths in both functions with a trivial label+goto. Thanks to Laurent Dufour for his help and suggestions on how to find the root cause and how to fix it. Link: http://lkml.kernel.org/r/152062809886.10599.7361006774123053312.stgit@bahia.lan Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: David Miller <davem@davemloft.net> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05Merge tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linuxLinus Torvalds10-90/+189
Pull nfsd updates from Bruce Fields: "Chuck Lever did a bunch of work on nfsd tracepoints, on RDMA, and on server xdr decoding (with an eye towards eliminating a data copy in the RDMA case). I did some refactoring of the delegation code in preparation for eliminating some delegation self-conflicts and implementing write delegations" * tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linux: (40 commits) nfsd: fix incorrect umasks sunrpc: remove incorrect HMAC request initialization NFSD: Clean up legacy NFS SYMLINK argument XDR decoders NFSD: Clean up legacy NFS WRITE argument XDR decoders nfsd: Trace NFSv4 COMPOUND execution nfsd: Add I/O trace points in the NFSv4 read proc nfsd: Add I/O trace points in the NFSv4 write path nfsd: Add "nfsd_" to trace point names nfsd: Record request byte count, not count of vectors nfsd: Fix NFSD trace points svc: Report xprt dequeue latency sunrpc: Report per-RPC execution stats sunrpc: Re-purpose trace_svc_process sunrpc: Save remote presentation address in svc_xprt for trace events sunrpc: Simplify trace_svc_recv sunrpc: Simplify do_enqueue tracing sunrpc: Move trace_svc_xprt_dequeue() sunrpc: Update show_svc_xprt_flags() to include recently added flags svc: Simplify ->xpo_secure_port sunrpc: Remove unneeded pointer dereference ...
2018-04-05Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+23
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-04-05Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: kfifo: fix inaccurate comment tools/thermal: tmon: fix for segfault net: Spelling s/stucture/structure/ edd: don't spam log if no EDD information is present Documentation: Fix early-microcode.txt references after file rename tracing: Block comments should align the * on each line treewide: Fix typos in printk GenWQE: Fix a typo in two comments treewide: Align function definition open/close braces
2018-04-04inet: frags: fix ip6frag_low_thresh boundaryEric Dumazet4-9/+2
Giving an integer to proc_doulongvec_minmax() is dangerous on 64bit arches, since linker might place next to it a non zero value preventing a change to ip6frag_low_thresh. ip6frag_low_thresh is not used anymore in the kernel, but we do not want to prematuraly break user scripts wanting to change it. Since specifying a minimal value of 0 for proc_doulongvec_minmax() is moot, let's remove these zero values in all defrag units. Fixes: 6e00f7dd5e4e ("ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04tipc: Fix namespace violation in tipc_sk_fill_sock_diagGhantaKrishnamurthy MohanKrishna1-1/+2
To fetch UID info for socket diagnostics, we determine the namespace of user context using tipc socket instance. This may cause namespace violation, as the kernel will remap based on UID. We fix this by fetching namespace info using the calling userspace netlink socket. Fixes: c30b70deb5f4 (tipc: implement socket diagnostics for AF_TIPC) Reported-by: syzbot+326e587eff1074657718@syzkaller.appspotmail.com Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04net: avoid unneeded atomic operation in ip*_append_data()Paolo Abeni2-2/+4
After commit 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()") and commit 1f4c6eb24029 ("ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()"), when transmitting sub MTU datagram, an addtional, unneeded atomic operation is performed in ip*_append_data() to update wmem_alloc: in the above condition the delta is 0. The above cause small but measurable performance regression in UDP xmit tput test with packet size below MTU. This change avoids such overhead updating wmem_alloc only if wmem_alloc_delta is non zero. The error path is left intentionally unmodified: it's a slow path and simplicity is preferred to performances. Fixes: 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()") Fixes: 1f4c6eb24029 ("ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04tipc: Fix missing list initializations in struct tipc_subscriptionJon Maloy1-0/+2
When an item of struct tipc_subscription is created, we fail to initialize the two lists aggregated into the struct. This has so far never been a problem, since the items are just added to a root object by list_add(), which does not require the addee list to be pre-initialized. However, syzbot is provoking situations where this addition fails, whereupon the attempted removal if the item from the list causes a crash. This problem seems to always have been around, despite that the code for creating this object was rewritten in commit 242e82cc95f6 ("tipc: collapse subscription creation functions"), which is still in net-next. We fix this for that commit by initializing the two lists properly. Fixes: 242e82cc95f6 ("tipc: collapse subscription creation functions") Reported-by: syzbot+0bb443b74ce09197e970@syzkaller.appspotmail.com Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: udp: set dst cache for a connected sk if current not validAlexey Kodanev1-19/+2
A new RTF_CACHE route can be created between ip6_sk_dst_lookup_flow() and ip6_dst_store() calls in udpv6_sendmsg(), when datagram sending results to ICMPV6_PKT_TOOBIG error: udp_v6_send_skb(), for example with vti6 tunnel: vti6_xmit(), get ICMPV6_PKT_TOOBIG error skb_dst_update_pmtu(), can create a RTF_CACHE clone icmpv6_send() ... udpv6_err() ip6_sk_update_pmtu() ip6_update_pmtu(), can create a RTF_CACHE clone ... ip6_datagram_dst_update() ip6_dst_store() And after commit 33c162a980fe ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update"), the UDPv6 error handler can update socket's dst cache, but it can happen before the update in the end of udpv6_sendmsg(), preventing getting the new dst cache on the next udpv6_sendmsg() calls. In order to fix it, save dst in a connected socket only if the current socket's dst cache is invalid. The previous patch prepared ip6_sk_dst_lookup_flow() to do that with the new argument, and this patch enables it in udpv6_sendmsg(). Fixes: 33c162a980fe ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update") Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg()Alexey Kodanev1-5/+5
This should make it consistent with ip6_sk_dst_lookup_flow() that is accepting the new 'connected' parameter of type bool. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()Alexey Kodanev3-5/+14
Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update the cache only if ip6_sk_dst_check() returns NULL and a socket is connected. The function is used as before, the new behavior for UDP sockets in udpv6_sendmsg() will be enabled in the next patch. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: add a wrapper for ip6_dst_store() with flowi6 checksAlexey Kodanev2-8/+18
Move commonly used pattern of ip6_dst_store() usage to a separate function - ip6_sk_dst_store_flow(), which will check the addresses for equality using the flow information, before saving them. There is no functional changes in this patch. In addition, it will be used in the next patch, in ip6_sk_dst_lookup_flow(). Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04af_unix: remove redundant lockdep classCong Wang1-10/+0
After commit 581319c58600 ("net/socket: use per af lockdep classes for sk queues") sock queue locks now have per-af lockdep classes, including unix socket. It is no longer necessary to workaround it. I noticed this while looking at a syzbot deadlock report, this patch itself doesn't fix it (this is why I don't add Reported-by). Fixes: 581319c58600 ("net/socket: use per af lockdep classes for sk queues") Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04rxrpc: Fix undefined packet handlingDavid Howells2-0/+12
By analogy with other Rx implementations, RxRPC packet types 9, 10 and 11 should just be discarded rather than being aborted like other undefined packet types. Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds450-7855/+13752
Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...
2018-04-03sunrpc: remove incorrect HMAC request initializationEric Biggers1-3/+0
make_checksum_hmac_md5() is allocating an HMAC transform and doing crypto API calls in the following order: crypto_ahash_init() crypto_ahash_setkey() crypto_ahash_digest() This is wrong because it makes no sense to init() the request before a key has been set, given that the initial state depends on the key. And digest() is short for init() + update() + final(), so in this case there's no need to explicitly call init() at all. Before commit 9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key") the extra init() had no real effect, at least for the software HMAC implementation. (There are also hardware drivers that implement HMAC-MD5, and it's not immediately obvious how gracefully they handle init() before setkey().) But now the crypto API detects this incorrect initialization and returns -ENOKEY. This is breaking NFS mounts in some cases. Fix it by removing the incorrect call to crypto_ahash_init(). Reported-by: Michael Young <m.a.young@durham.ac.uk> Fixes: 9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key") Fixes: fffdaef2eb4a ("gss_krb5: Add support for rc4-hmac encryption") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03NFSD: Clean up legacy NFS SYMLINK argument XDR decodersChuck Lever1-0/+67
Move common code in NFSD's legacy SYMLINK decoders into a helper. The immediate benefits include: - one fewer data copies on transports that support DDP - consistent error checking across all versions - reduction of code duplication - support for both legal forms of SYMLINK requests on RDMA transports for all versions of NFS (in particular, NFSv2, for completeness) In the long term, this helper is an appropriate spot to perform a per-transport call-out to fill the pathname argument using, say, RDMA Reads. Filling the pathname in the proc function also means that eventually the incoming filehandle can be interpreted so that filesystem- specific memory can be allocated as a sink for the pathname argument, rather than using anonymous pages. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03NFSD: Clean up legacy NFS WRITE argument XDR decodersChuck Lever1-0/+42
Move common code in NFSD's legacy NFS WRITE decoders into a helper. The immediate benefit is reduction of code duplication and some nice micro-optimizations (see below). In the long term, this helper can perform a per-transport call-out to fill the rq_vec (say, using RDMA Reads). The legacy WRITE decoders and procs are changed to work like NFSv4, which constructs the rq_vec just before it is about to call vfs_writev. Why? Calling a transport call-out from the proc instead of the XDR decoder means that the incoming FH can be resolved to a particular filesystem and file. This would allow pages from the backing file to be presented to the transport to be filled, rather than presenting anonymous pages and copying or flipping them into the file's page cache later. I also prefer using the pages in rq_arg.pages, instead of pulling the data pages directly out of the rqstp::rq_pages array. This is currently the way the NFSv3 write decoder works, but the other two do not seem to take this approach. Fixing this removes the only reference to rq_pages found in NFSD, eliminating an NFSD assumption about how transports use the pages in rq_pages. Lastly, avoid setting up the first element of rq_vec as a zero- length buffer. This happens with an RDMA transport when a normal Read chunk is present because the data payload is in rq_arg's page list (none of it is in the head buffer). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03svc: Report xprt dequeue latencyChuck Lever1-2/+2
Record the time between when a rqstp is enqueued on a transport and when it is dequeued. This includes how long the rqstp waits on the queue and how long it takes the kernel scheduler to wake a nfsd thread to service it. The svc_xprt_dequeue trace point is altered to include the number of microseconds between xprt_enqueue and xprt_dequeue. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Report per-RPC execution statsChuck Lever1-1/+2
Introduce a mechanism to report the server-side execution latency of each RPC. The goal is to enable user space to filter the trace record for latency outliers, build histograms, etc. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Re-purpose trace_svc_processChuck Lever1-6/+3
Currently, trace_svc_process has two call sites: 1. Just after a call to svc_send. svc_send already invokes trace_svc_send with the same arguments just before returning 2. Just before a call to svc_drop. svc_drop already invokes trace_svc_drop with the same arguments just after it is called Therefore trace_svc_process does not provide any additional information not already provided by these other trace points. However, it would be useful to record the incoming RPC procedure. So reuse trace_svc_process for this purpose. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Save remote presentation address in svc_xprt for trace eventsChuck Lever3-2/+6
TP_printk defines a format string that is passed to user space for converting raw trace event records to something human-readable. My user space's printf (Oracle Linux 7), however, does not have a %pI format specifier. The result is that what is supposed to be an IP address in the output of "trace-cmd report" is just a string that says the field couldn't be displayed. To fix this, adopt the same approach as the client: maintain a pre- formated presentation address for occasions when %pI is not available. The location of the trace_svc_send trace point is adjusted so that rqst->rq_xprt is not NULL when the trace event is recorded. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Simplify trace_svc_recvChuck Lever1-1/+0
There doesn't seem to be a lot of value in calling trace_svc_recv in the failing case. 1. There are two very common cases: one is the transport is not ready, and the other is shutdown. Neither is terribly interesting. 2. The trace record for the failing case contains nothing but the status code. Therefore the trace point call site in the error exit is removed. Since the trace point is now recording a length instead of a status, rename the status field and remove the case that records a zero XID. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Simplify do_enqueue tracingChuck Lever1-8/+3
There are three cases where svc_xprt_do_enqueue() returns without waking an nfsd thread: 1. There is no work to do 2. The transport is already busy 3. There are no available nfsd threads Only 3. is truly interesting. Move the trace point so it records that there was work to do and either an nfsd thread was awoken, or a free one could not found. As an additional clean up, remove a redundant comment and a couple of dprintk call sites. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Move trace_svc_xprt_dequeue()Chuck Lever1-4/+1
Reduce the amount of noise generated by trace_svc_xprt_dequeue by moving it to the end of svc_get_next_xprt. This generates exactly one trace event when a ready xprt is found, rather than spurious events when there is no work to do. The empty events contain no information that can't be obtained simply by tracing function calls to svc_xprt_dequeue. A small additional benefit is simplification of the svc_xprt_event trace class, which no longer has to handle the case when the @xprt parameter is NULL. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03svc: Simplify ->xpo_secure_portChuck Lever3-9/+9
Clean up: Instead of returning a value that is used to set or clear a bit, just make ->xpo_secure_port mangle that bit, and return void. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Remove unneeded pointer dereferenceChuck Lever1-2/+2
Clean up: Noticed during code inspection that there is already a local automatic variable "xprt" so dereferencing rqst->rq_xprt again is unnecessary. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-02Merge branch 'syscalls-next' of ↵Linus Torvalds2-112/+258
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull removal of in-kernel calls to syscalls from Dominik Brodowski: "System calls are interaction points between userspace and the kernel. Therefore, system call functions such as sys_xyzzy() or compat_sys_xyzzy() should only be called from userspace via the syscall table, but not from elsewhere in the kernel. At least on 64-bit x86, it will likely be a hard requirement from v4.17 onwards to not call system call functions in the kernel: It is better to use use a different calling convention for system calls there, where struct pt_regs is decoded on-the-fly in a syscall wrapper which then hands processing over to the actual syscall function. This means that only those parameters which are actually needed for a specific syscall are passed on during syscall entry, instead of filling in six CPU registers with random user space content all the time (which may cause serious trouble down the call chain). Those x86-specific patches will be pushed through the x86 tree in the near future. Moreover, rules on how data may be accessed may differ between kernel data and user data. This is another reason why calling sys_xyzzy() is generally a bad idea, and -- at most -- acceptable in arch-specific code. This patchset removes all in-kernel calls to syscall functions in the kernel with the exception of arch/. On top of this, it cleans up the three places where many syscalls are referenced or prototyped, namely kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h" * 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits) bpf: whitelist all syscalls for error injection kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions kernel/sys_ni: sort cond_syscall() entries syscalls/x86: auto-create compat_sys_*() prototypes syscalls: sort syscall prototypes in include/linux/compat.h net: remove compat_sys_*() prototypes from net/compat.h syscalls: sort syscall prototypes in include/linux/syscalls.h kexec: move sys_kexec_load() prototype to syscalls.h x86/sigreturn: use SYSCALL_DEFINE0 x86: fix sys_sigreturn() return type to be long, not unsigned long x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm() mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead() mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff() mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64() fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate() fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate() fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid() kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare() ...
2018-04-02net: socket: add __compat_sys_...msg() helpers; remove in-kernel calls to ↵Dominik Brodowski1-7/+30
compat syscalls Using the net-internal helpers __compat_sys_...msg() allows us to avoid the internal calls to the compat_sys_...msg() syscalls. compat_sys_recvmmsg() is handled in a different patch. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __compat_sys_recvmmsg() helper; remove in-kernel call to ↵Dominik Brodowski1-5/+12
compat syscall Using the net-internal helper __compat_sys_recvmmsg() allows us to avoid the internal calls to the compat_sys_recvmmsg() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __compat_sys_getsockopt() helper; remove in-kernel call to ↵Dominik Brodowski1-4/+12
compat syscall Using the net-internal helper __compat_sys_getsockopt() allows us to avoid the internal calls to the compat_sys_getsockopt() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __compat_sys_setsockopt() helper; remove in-kernel call to ↵Dominik Brodowski1-4/+10
compat syscall Using the net-internal helper __compat_sys_setsockopt() allows us to avoid the internal calls to the compat_sys_setsockopt() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __compat_sys_recvfrom() helper; remove in-kernel call to ↵Dominik Brodowski1-7/+16
compat syscall Using the net-internal helper __compat_sys_recvfrom() allows us to avoid the internal calls to the compat_sys_recvfrom() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: replace call to sys_recv() with __sys_recvfrom()Dominik Brodowski2-2/+4
sys_recv() merely expands the parameters to __sys_recvfrom() by NULL and NULL. Open-code this in the two places which used sys_recv() as a wrapper to __sys_recvfrom(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: replace calls to sys_send() with __sys_sendto()Dominik Brodowski2-2/+3
sys_send() merely expands the parameters to __sys_sendto() by NULL and 0. Open-code this in the two places which used sys_send() as a wrapper to __sys_sendto(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: move check for forbid_cmsg_compat to __sys_...msg()Dominik Brodowski2-18/+28
The non-compat codepaths for sys_...msg() verify that MSG_CMSG_COMPAT is not set. By moving this check to the __sys_...msg() functions (and making it dependent on a static flag passed to this function), we can call the __sys...msg() functions instead of the syscall functions in all cases. __sys_recvmmsg() does not need this trickery, as the check is handled within the do_sys_recvmmsg() function internal to net/socket.c. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add do_sys_recvmmsg() helper; remove in-kernel call to syscallDominik Brodowski1-5/+12
Using the net-internal helper do_sys_recvmmsg() allows us to avoid the internal calls to the sys_getsockopt() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __sys_getsockopt() helper; remove in-kernel call to syscallDominik Brodowski1-4/+10
Using the net-internal helper __sys_getsockopt() allows us to avoid the internal calls to the sys_getsockopt() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __sys_setsockopt() helper; remove in-kernel call to syscallDominik Brodowski1-3/+10
Using the net-internal helper __sys_setsockopt() allows us to avoid the internal calls to the sys_setsockopt() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __sys_shutdown() helper; remove in-kernel call to syscallDominik Brodowski2-3/+8
Using the net-internal helper __sys_shutdown() allows us to avoid the internal calls to the sys_shutdown() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __sys_socketpair() helper; remove in-kernel call to syscallDominik Brodowski2-4/+9
Using the net-internal helper __sys_socketpair() allows us to avoid the internal calls to the sys_socketpair() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __sys_getpeername() helper; remove in-kernel call to syscallDominik Brodowski2-5/+11
Using the net-internal helper __sys_getpeername() allows us to avoid the internal calls to the sys_getpeername() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __sys_getsockname() helper; remove in-kernel call to syscallDominik Brodowski2-5/+11
Using the net-internal helper __sys_getsockname() allows us to avoid the internal calls to the sys_getsockname() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02net: socket: add __sys_listen() helper; remove in-kernel call to syscallDominik Brodowski2-3/+8
Using the net-internal helper __sys_listen() allows us to avoid the internal calls to the sys_listen() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>