Age | Commit message (Collapse) | Author | Files | Lines |
|
Audit the action of unregistering ebtables and x_tables.
See: https://github.com/linux-audit/audit-kernel/issues/44
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
NETFILTER_CFG record generation was inconsistent for x_tables and
ebtables configuration changes. The call was needlessly messy and there
were supporting records missing at times while they were produced when
not requested. Simplify the logging call into a new audit_log_nfcfg
call. Honour the audit_enabled setting while more consistently
recording information including supporting records by tidying up dummy
checks.
Add an op= field that indicates the operation being performed (register
or replace).
Here is the enhanced sample record:
type=NETFILTER_CFG msg=audit(1580905834.919:82970): table=filter family=2 entries=83 op=replace
Generate audit NETFILTER_CFG records on ebtables table registration.
Previously this was being done for x_tables registration and replacement
operations and ebtables table replacement only.
See: https://github.com/linux-audit/audit-kernel/issues/25
See: https://github.com/linux-audit/audit-kernel/issues/35
See: https://github.com/linux-audit/audit-kernel/issues/43
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
|
|
Pull ceph updates from Ilya Dryomov:
"The main items are:
- support for asynchronous create and unlink (Jeff Layton).
Creates and unlinks are satisfied locally, without waiting for a
reply from the MDS, provided the client has been granted
appropriate caps (new in v15.y.z ("Octopus") release). This can be
a big help for metadata heavy workloads such as tar and rsync.
Opt-in with the new nowsync mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself).
When the driver was converted to blk-mq, we settled on a single
blk-mq queue because of a global lock in libceph and some other
technical debt. These have since been addressed, so allocate a
queue per CPU to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan).
This has been our long-standing behavior, but it causes issues with
some active/standby applications (synchronous I/O, stalls if the
standby goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis
Henriques)"
* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
ceph: fix snapshot directory timestamps
ceph: wait for async creating inode before requesting new max size
ceph: don't skip updating wanted caps when cap is stale
ceph: request new max size only when there is auth cap
ceph: cleanup return error of try_get_cap_refs()
ceph: return ceph_mdsc_do_request() errors from __get_parent()
ceph: check all mds' caps after page writeback
ceph: update i_requested_max_size only when sending cap msg to auth mds
ceph: simplify calling of ceph_get_fmode()
ceph: remove delay check logic from ceph_check_caps()
ceph: consider inode's last read/write when calculating wanted caps
ceph: always renew caps if mds_wanted is insufficient
ceph: update dentry lease for async create
ceph: attempt to do async create when possible
ceph: cache layout in parent dir on first sync create
ceph: add new MDS req field to hold delegated inode number
ceph: decode interval_sets for delegated inos
ceph: make ceph_fill_inode non-static
ceph: perform asynchronous unlink if we have sufficient caps
ceph: don't take refs to want mask unless we have all bits
...
|
|
Now that the kernel specifies binutils 2.23 as the minimum version, we
can remove ifdefs for AVX2 and ADX throughout.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Doing this probing inside of the Makefiles means we have a maze of
ifdefs inside the source code and child Makefiles that need to make
proper decisions on this too. Instead, we do it at Kconfig time, like
many other compiler and assembler options, which allows us to set up the
dependencies normally for full compilation units. In the process, the
ADX test changes to use %eax instead of %r10 so that it's valid in both
32-bit and 64-bit mode.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a page leak in nfs_destroy_unlinked_subrequests()
- Fix use-after-free issues in nfs_pageio_add_request()
- Fix new mount code constant_table array definitions
- finish_automount() requires us to hold 2 refs to the mount record
Features:
- Improve the accuracy of telldir/seekdir by using 64-bit cookies
when possible.
- Allow one RDMA active connection and several zombie connections to
prevent blocking if the remote server is unresponsive.
- Limit the size of the NFS access cache by default
- Reduce the number of references to credentials that are taken by
NFS
- pNFS files and flexfiles drivers now support per-layout segment
COMMIT lists.
- Enable partial-file layout segments in the pNFS/flexfiles driver.
- Add support for CB_RECALL_ANY to the pNFS flexfiles layout type
- pNFS/flexfiles Report NFS4ERR_DELAY and NFS4ERR_GRACE errors from
the DS using the layouterror mechanism.
Bugfixes and cleanups:
- SUNRPC: Fix krb5p regressions
- Don't specify NFS version in "UDP not supported" error
- nfsroot: set tcp as the default transport protocol
- pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()
- alloc_nfs_open_context() must use the file cred when available
- Fix locking when dereferencing the delegation cred
- Fix memory leaks in O_DIRECT when nfs_get_lock_context() fails
- Various clean ups of the NFS O_DIRECT commit code
- Clean up RDMA connect/disconnect
- Replace zero-length arrays with C99-style flexible arrays"
* tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (86 commits)
NFS: Clean up process of marking inode stale.
SUNRPC: Don't start a timer on an already queued rpc task
NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn()
NFS/pnfs: Fix dereference of layout cred in pnfs_layoutcommit_inode()
NFS: Beware when dereferencing the delegation cred
NFS: Add a module parameter to set nfs_mountpoint_expiry_timeout
NFS: finish_automount() requires us to hold 2 refs to the mount record
NFS: Fix a few constant_table array definitions
NFS: Try to join page groups before an O_DIRECT retransmission
NFS: Refactor nfs_lock_and_join_requests()
NFS: Reverse the submission order of requests in __nfs_pageio_add_request()
NFS: Clean up nfs_lock_and_join_requests()
NFS: Remove the redundant function nfs_pgio_has_mirroring()
NFS: Fix memory leaks in nfs_pageio_stop_mirroring()
NFS: Fix a request reference leak in nfs_direct_write_clear_reqs()
NFS: Fix use-after-free issues in nfs_pageio_add_request()
NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()
NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()
NFS: Remove unused FLUSH_SYNC support in nfs_initiate_pgio()
pNFS/flexfiles: Specify the layout segment range in LAYOUTGET
...
|
|
Pull networking fixes from David Miller:
1) Slave bond and team devices should not be assigned ipv6 link local
addresses, from Jarod Wilson.
2) Fix clock sink config on some at803x PHY devices, from Oleksij
Rempel.
3) Uninitialized stack space transmitted in slcan frames, fix from
Richard Palethorpe.
4) Guard HW VLAN ops properly in stmmac driver, from Jose Abreu.
5) "=" --> "|=" fix in aquantia driver, from Colin Ian King.
6) Fix TCP fallback in mptcp, from Florian Westphal. (accessing a plain
tcp_sk as if it were an mptcp socket).
7) Fix cavium driver in some configurations wrt. PTP, from Yue Haibing.
8) Make ipv6 and ipv4 consistent in the lower bound allowed for
neighbour entry retrans_time, from Hangbin Liu.
9) Don't use private workqueue in pegasus usb driver, from Petko
Manolov.
10) Fix integer overflow in mlxsw, from Colin Ian King.
11) Missing refcnt init in cls_tcindex, from Cong Wang.
12) One too many loop iterations when processing cmpri entries in ipv6
rpl code, from Alexander Aring.
13) Disable SG and TSO by default in r8169, from Heiner Kallweit.
14) NULL deref in macsec, from Davide Caratti.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
macsec: fix NULL dereference in macsec_upd_offload()
skbuff.h: Improve the checksum related comments
net: dsa: bcm_sf2: Ensure correct sub-node is parsed
qed: remove redundant assignment to variable 'rc'
wimax: remove some redundant assignments to variable result
mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE
mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITY
r8169: change back SG and TSO to be disabled by default
net: dsa: bcm_sf2: Do not register slave MDIO bus with OF
ipv6: rpl: fix loop iteration
tun: Don't put_page() for all negative return values from XDP program
net: dsa: mt7530: fix null pointer dereferencing in port5 setup
mptcp: add some missing pr_fmt defines
net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers
net_sched: fix a missing refcnt in tcindex_init()
net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting
mlxsw: spectrum_trap: fix unintention integer overflow on left shift
pegasus: Remove pegasus' own workqueue
neigh: support smaller retrans_time settting
net: openvswitch: use hlist_for_each_entry_rcu instead of hlist_for_each_entry
...
|
|
This patch fix the loop iteration by not walking over the last
iteration. The cmpri compressing value exempt the last segment. As the
code shows the last iteration will be overwritten by cmpre value
handling which is for the last segment.
I think this doesn't end in any bufferoverflows because we work on worst
case temporary buffer sizes but it ends in not best compression settings
in some cases.
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull 9p updates from Dominique Martinet:
"Not much new, but a few patches for this cycle:
- Fix read with O_NONBLOCK to allow incomplete read and return
immediately
- Rest is just cleanup (indent, unused field in struct, extra
semicolon)"
* tag '9p-for-5.7' of git://github.com/martinetd/linux:
net/9p: remove unused p9_req_t aux field
9p: read only once on O_NONBLOCK
9pnet: allow making incomplete read requests
9p: Remove unneeded semicolon
9p: Fix Kconfig indentation
|
|
Move the test for whether a task is already queued to prevent
corruption of the timer list in __rpc_sleep_on_priority_timeout().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyrings fixes from David Howells:
"Here's a couple of patches that fix a circular dependency between
holding key->sem and mm->mmap_sem when reading data from a key.
One potential issue is that a filesystem looking to use a key inside,
say, ->readpages() could deadlock if the key being read is the key
that's required and the buffer the key is being read into is on a page
that needs to be fetched.
The case actually detected is a bit more involved - with a filesystem
calling request_key() and locking the target keyring for write - which
could be being read"
* tag 'keys-fixes-20200329' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
KEYS: Avoid false positive ENOMEM error on key read
KEYS: Don't write out to userspace while holding key semaphore
|
|
Pull nfsd updates from Chuck Lever:
- Fix EXCHANGE_ID response when NFSD runs in a container
- A battery of new static trace points
- Socket transports now use bio_vec to send Replies
- NFS/RDMA now supports filesystems with no .splice_read method
- Favor memcpy() over DMA mapping for small RPC/RDMA Replies
- Add pre-requisites for supporting multiple Write chunks
- Numerous minor fixes and clean-ups
[ Chuck is filling in for Bruce this time while he and his family settle
into a new house ]
* tag 'nfsd-5.7' of git://git.linux-nfs.org/projects/cel/cel-2.6: (39 commits)
svcrdma: Fix leak of transport addresses
SUNRPC: Fix a potential buffer overflow in 'svc_print_xprts()'
SUNRPC/cache: don't allow invalid entries to be flushed
nfsd: fsnotify on rmdir under nfsd/clients/
nfsd4: kill warnings on testing stateids with mismatched clientids
nfsd: remove read permission bit for ctl sysctl
NFSD: Fix NFS server build errors
sunrpc: Add tracing for cache events
SUNRPC/cache: Allow garbage collection of invalid cache entries
nfsd: export upcalls must not return ESTALE when mountd is down
nfsd: Add tracepoints for update of the expkey and export cache entries
nfsd: Add tracepoints for exp_find_key() and exp_get_by_name()
nfsd: Add tracing to nfsd_set_fh_dentry()
nfsd: Don't add locks to closed or closing open stateids
SUNRPC: Teach server to use xprt_sock_sendmsg for socket sends
SUNRPC: Refactor xs_sendpages()
svcrdma: Avoid DMA mapping small RPC Replies
svcrdma: Fix double sync of transport header buffer
svcrdma: Refactor chunk list encoders
SUNRPC: Add encoders for list item discriminators
...
|
|
Some of the mptcp logs didn't print out the format string:
[ 185.651493] DSS
[ 185.651494] data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 185.651494] data_ack=13792750332298763796
[ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=0 skb=0000000063dc595d
[ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 status=0
[ 185.651495] MPTCP: msk ack_seq=9bbc894565aa2f9a subflow ack_seq=9bbc894565aa2f9a
[ 185.651496] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=1 skb=0000000012e809e1
So this patch added these missing pr_fmt defines. Then we can get the same
format string "MPTCP" in all mptcp logs like this:
[ 142.795829] MPTCP: DSS
[ 142.795829] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 142.795829] MPTCP: data_ack=8089704603109242421
[ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=0 skb=00000000d5f230df
[ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 status=0
[ 142.795831] MPTCP: msk ack_seq=66790290f1199d9b subflow ack_seq=66790290f1199d9b
[ 142.795831] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=1 skb=00000000de5aca2e
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial refcnt of struct tcindex_data should be 1,
it is clear that I forgot to set it to 1 in tcindex_init().
This leads to a dec-after-zero warning.
Reported-by: syzbot+8325e509a1bf83ec741d@syzkaller.appspotmail.com
Fixes: 304e024216a8 ("net_sched: add a temporary refcnt for struct tcindex_data")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
Currently, we limited the retrans_time to be greater than HZ/2. i.e.
setting retrans_time less than 500ms will not work. This makes the user
unable to achieve a more accurate control for bonding arp fast failover.
Update the sanity check to HZ/100, which is 10ms, to let users have more
ability on the retrans_time control.
v3: sync the behavior with IPv6 and update all the timer handler
v2: use HZ instead of hard code number
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The struct sw_flow is protected by RCU, when traversing them,
use hlist_for_each_entry_rcu.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, SO_BINDTODEVICE requires CAP_NET_RAW. This change allows a
non-root user to bind a socket to an interface if it is not already
bound. This is useful to allow an application to bind itself to a
specific VRF for outgoing or incoming connections. Currently, an
application wanting to manage connections through several VRF need to
be privileged.
Previously, IP_UNICAST_IF and IPV6_UNICAST_IF were added for
Wine (76e21053b5bf3 and c4062dfc425e9) specifically for use by
non-root processes. However, they are restricted to sendmsg() and not
usable with TCP. Allowing SO_BINDTODEVICE would allow TCP clients to
get the same privilege. As for TCP servers, outside the VRF use case,
SO_BINDTODEVICE would only further restrict connections a server could
accept.
When an application is restricted to a VRF (with `ip vrf exec`), the
socket is bound to an interface at creation and therefore, a
non-privileged call to SO_BINDTODEVICE to escape the VRF fails.
When an application bound a socket to SO_BINDTODEVICE and transmit it
to a non-privileged process through a Unix socket, a tentative to
change the bound device also fails.
Before:
>>> import socket
>>> s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
>>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
PermissionError: [Errno 1] Operation not permitted
After:
>>> import socket
>>> s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
>>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
>>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
PermissionError: [Errno 1] Operation not permitted
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Obtained with:
$ make W=1 net/mptcp/token.o
net/mptcp/token.c:53: warning: Function parameter or member 'req' not described in 'mptcp_token_new_request'
net/mptcp/token.c:98: warning: Function parameter or member 'sk' not described in 'mptcp_token_new_connect'
net/mptcp/token.c:133: warning: Function parameter or member 'conn' not described in 'mptcp_token_new_accept'
net/mptcp/token.c:178: warning: Function parameter or member 'token' not described in 'mptcp_token_destroy_request'
net/mptcp/token.c:191: warning: Function parameter or member 'token' not described in 'mptcp_token_destroy'
Fixes: 79c0949e9a09 (mptcp: Add key generation and token tree)
Fixes: 58b09919626b (mptcp: create msk early)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mptcp_subflow_data_available() is commonly called via
ssk->sk_data_ready(), in this case the mptcp socket lock
cannot be acquired.
Therefore, while we can safely discard subflow data that
was already received up to msk->ack_seq, we cannot be sure
that 'subflow->data_avail' will still be valid at the time
userspace wants to read the data -- a previous read on a
different subflow might have carried this data already.
In that (unlikely) event, msk->ack_seq will have been updated
and will be ahead of the subflow dsn.
We can check for this condition and skip/resync to the expected
sequence number.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is needed at least until proper MPTCP-Level fin/reset
signalling gets added:
We wake parent when a subflow changes, but we should do this only
when all subflows have closed, not just one.
Schedule the mptcp worker and tell it to check eof state on all
subflows.
Only flag mptcp socket as closed and wake userspace processes blocking
in poll if all subflows have closed.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Christoph Paasch reports following crash:
general protection fault [..]
CPU: 0 PID: 2874 Comm: syz-executor072 Not tainted 5.6.0-rc5 #62
RIP: 0010:__pv_queued_spin_lock_slowpath kernel/locking/qspinlock.c:471
[..]
queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:50 [inline]
do_raw_spin_lock include/linux/spinlock.h:181 [inline]
spin_lock_bh include/linux/spinlock.h:343 [inline]
__mptcp_flush_join_list+0x44/0xb0 net/mptcp/protocol.c:278
mptcp_shutdown+0xb3/0x230 net/mptcp/protocol.c:1882
[..]
Problem is that mptcp_shutdown() socket isn't an mptcp socket,
its a plain tcp_sk. Thus, trying to access mptcp_sk specific
members accesses garbage.
Root cause is that accept() returns a fallback (tcp) socket, not an mptcp
one. There is code in getpeername to detect this and override the sockets
stream_ops. But this will only run when accept() caller provided a
sockaddr struct. "accept(fd, NULL, 0)" will therefore result in
mptcp stream ops, but with sock->sk pointing at a tcp_sk.
Update the existing fallback handling to detect this as well.
Moreover, mptcp_shutdown did not have fallback handling, and
mptcp_poll did it too late so add that there as well.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable err is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: f41071407c85 ("net: dsa: implement auto-normalization of MTU for bridge hardware datapath")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bonding slave and team port devices should not have link-local addresses
automatically added to them, as it can interfere with openvswitch being
able to properly add tc ingress.
Basic reproducer, courtesy of Marcelo:
$ ip link add name bond0 type bond
$ ip link set dev ens2f0np0 master bond0
$ ip link set dev ens2f1np2 master bond0
$ ip link set dev bond0 up
$ ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens2f0np0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc
mq master bond0 state UP group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
5: ens2f1np2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc
mq master bond0 state DOWN group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
11: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20f:53ff:fe2f:ea40/64 scope link
valid_lft forever preferred_lft forever
(above trimmed to relevant entries, obviously)
$ sysctl net.ipv6.conf.ens2f0np0.addr_gen_mode=0
net.ipv6.conf.ens2f0np0.addr_gen_mode = 0
$ sysctl net.ipv6.conf.ens2f1np2.addr_gen_mode=0
net.ipv6.conf.ens2f1np2.addr_gen_mode = 0
$ ip a l ens2f0np0
2: ens2f0np0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc
mq master bond0 state UP group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative
valid_lft forever preferred_lft forever
$ ip a l ens2f1np2
5: ens2f1np2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc
mq master bond0 state DOWN group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative
valid_lft forever preferred_lft forever
Looks like addrconf_sysctl_addr_gen_mode() bypasses the original "is
this a slave interface?" check added by commit c2edacf80e15, and
results in an address getting added, while w/the proposed patch added,
no address gets added. This simply adds the same gating check to another
code path, and thus should prevent the same devices from erroneously
obtaining an ipv6 link-local address.
Fixes: d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode")
Reported-by: Moshe Levi <moshele@mellanox.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: Marcelo Ricardo Leitner <mleitner@redhat.com>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Although we intentionally use an ordered workqueue for all tc
filter works, the ordering is not guaranteed by RCU work,
given that tcf_queue_work() is esstenially a call_rcu().
This problem is demostrated by Thomas:
CPU 0:
tcf_queue_work()
tcf_queue_work(&r->rwork, tcindex_destroy_rexts_work);
-> Migration to CPU 1
CPU 1:
tcf_queue_work(&p->rwork, tcindex_destroy_work);
so the 2nd work could be queued before the 1st one, which leads
to a free-after-free.
Enforcing this order in RCU work is hard as it requires to change
RCU code too. Fortunately we can workaround this problem in tcindex
filter by taking a temporary refcnt, we only refcnt it right before
we begin to destroy it. This simplifies the code a lot as a full
refcnt requires much more changes in tcindex_set_parms().
Reported-by: syzbot+46f513c3033d592409d2@syzkaller.appspotmail.com
Fixes: 3d210534cc93 ("net_sched: fix a race condition in tcindex_destroy()")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
|
|
In case memory resources for buf were allocated, release them before
return.
Addresses-Coverity-ID: 1492011 ("Resource leak")
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix an oops in dsa_port_phylink_mac_change() caused by a combination
of a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA
ports unless needed") and the net-dsa-improve-serdes-integration
series of patches 65b7a2c8e369 ("Merge branch
'net-dsa-improve-serdes-integration'").
Unable to handle kernel NULL pointer dereference at virtual address 00000124
pgd = c0004000
[00000124] *pgd=00000000
Internal error: Oops: 805 [#1] SMP ARM
Modules linked in: tag_edsa spi_nor mtd xhci_plat_hcd mv88e6xxx(+) xhci_hcd armada_thermal marvell_cesa dsa_core ehci_orion libdes phy_armada38x_comphy at24 mcp3021 sfp evbug spi_orion sff mdio_i2c
CPU: 1 PID: 214 Comm: irq/55-mv88e6xx Not tainted 5.6.0+ #470
Hardware name: Marvell Armada 380/385 (Device Tree)
PC is at phylink_mac_change+0x10/0x88
LR is at mv88e6352_serdes_irq_status+0x74/0x94 [mv88e6xxx]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A testing message was brought by 13d0f7b814d9 ("net/bpfilter: fix dprintf
usage for /dev/kmsg") but should've been deleted before patch submission.
Although it doesn't cause any harm to the code or functionality itself, it's
totally unpleasant to have it displayed on every loop iteration with no real
use case. Thus remove it unconditionally.
Fixes: 13d0f7b814d9 ("net/bpfilter: fix dprintf usage for /dev/kmsg")
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Add support to specify a stateful expression in set definitions,
this allows users to specify e.g. counters per set elements.
2) Flowtable software counter support.
3) Flowtable hardware offload counter support, from wenxu.
3) Parallelize flowtable hardware offload requests, from Paul Blakey.
This includes a patch to add one work entry per offload command.
4) Several patches to rework nf_queue refcount handling, from Florian
Westphal.
4) A few fixes for the flowtable tunnel offload: Fix crash if tunneling
information is missing and set up indirect flow block as TC_SETUP_FT,
patch from wenxu.
5) Stricter netlink attribute sanity check on filters, from Romain Bellan
and Florent Fourcot.
5) Annotations to make sparse happy, from Jules Irenge.
6) Improve icmp errors in debugging information, from Haishuang Yan.
7) Fix warning in IPVS icmp error debugging, from Haishuang Yan.
8) Fix endianess issue in tcp extension header, from Sergey Marinkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous patch allowed device drivers to publish their default
binding between packet trap policers and packet trap groups. However,
some users might not be content with this binding and would like to
change it.
In case user space passed a packet trap policer identifier when setting
a packet trap group, invoke the appropriate device driver callback and
pass the new policer identifier.
v2:
* Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in
devlink_trap_group_set() and bail if not present
* Add extack error message in case trap group was partially modified
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Packet trap groups are used to aggregate logically related packet traps.
Currently, these groups allow user space to batch operations such as
setting the trap action of all member traps.
In order to prevent the CPU from being overwhelmed by too many trapped
packets, it is desirable to bind a packet trap policer to these groups.
For example, to limit all the packets that encountered an exception
during routing to 10Kpps.
Allow device drivers to bind default packet trap policers to packet trap
groups when the latter are registered with devlink.
The next patch will enable user space to change this default binding.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devices capable of offloading the kernel's datapath and perform
functions such as bridging and routing must also be able to send (trap)
specific packets to the kernel (i.e., the CPU) for processing.
For example, a device acting as a multicast-aware bridge must be able to
trap IGMP membership reports to the kernel for processing by the bridge
module.
In most cases, the underlying device is capable of handling packet rates
that are several orders of magnitude higher compared to those that can
be handled by the CPU.
Therefore, in order to prevent the underlying device from overwhelming
the CPU, devices usually include packet trap policers that are able to
police the trapped packets to rates that can be handled by the CPU.
This patch allows capable device drivers to register their supported
packet trap policers with devlink. User space can then tune the
parameters of these policer (currently, rate and burst size) and read
from the device the number of packets that were dropped by the policer,
if supported.
Subsequent patches in the series will allow device drivers to create
default binding between these policers and packet trap groups and allow
user space to change the binding.
v2:
* Add 'strict_start_type' in devlink policy
* Have device drivers provide max/min rate/burst size for each policer.
Use them to check validity of user provided parameters
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid taking a reference on listen sockets by checking the socket type
in the sk_assign and in the corresponding skb_steal_sock() code in the
the transport layer, and by ensuring that the prefetch free (sock_pfree)
function uses the same logic to check whether the socket is refcounted.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-4-joe@wand.net.nz
|
|
Refactor the UDP/TCP handlers slightly to allow skb_steal_sock() to make
the determination of whether the socket is reference counted in the case
where it is prefetched by earlier logic such as early_demux.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-3-joe@wand.net.nz
|
|
Add support for TPROXY via a new bpf helper, bpf_sk_assign().
This helper requires the BPF program to discover the socket via a call
to bpf_sk*_lookup_*(), then pass this socket to the new helper. The
helper takes its own reference to the socket in addition to any existing
reference that may or may not currently be obtained for the duration of
BPF processing. For the destination socket to receive the traffic, the
traffic must be routed towards that socket via local route. The
simplest example route is below, but in practice you may want to route
traffic more narrowly (eg by CIDR):
$ ip route add local default dev lo
This patch avoids trying to introduce an extra bit into the skb->sk, as
that would require more invasive changes to all code interacting with
the socket to ensure that the bit is handled correctly, such as all
error-handling cases along the path from the helper in BPF through to
the orphan path in the input. Instead, we opt to use the destructor
variable to switch on the prefetch of the socket.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz
|
|
Pull documentation updates from Jonathan Corbet:
"This has been a busy cycle for documentation work.
Highlights include:
- Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
Maybe someday we'll get to the end of this stuff...maybe...
- Some organizational work to bring some order to the core-api
manual.
- Various new docs and additions to the existing documentation.
- Typo fixes, warning fixes, ..."
* tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits)
Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT
MAINTAINERS: adjust to filesystem doc ReST conversion
docs: deprecated.rst: Add BUG()-family
doc: zh_CN: add translation for virtiofs
doc: zh_CN: index files in filesystems subdirectory
docs: locking: Drop :c:func: throughout
docs: locking: Add 'need' to hardirq section
docs: conf.py: avoid thousands of duplicate label warning on Sphinx
docs: prevent warnings due to autosectionlabel
docs: fix reference to core-api/namespaces.rst
docs: fix pointers to io-mapping.rst and io_ordering.rst files
Documentation: Better document the softlockup_panic sysctl
docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref
docs: perf: imx-ddr.rst: get rid of a warning
docs: filesystems: fuse.rst: supress a Sphinx warning
docs: translations: it: avoid duplicate refs at programming-language.rst
docs: driver.rst: supress two ReSt warnings
docs: trace: events.rst: convert some new stuff to ReST format
Documentation: Add io_ordering.rst to driver-api manual
Documentation: Add io-mapping.rst to driver-api manual
...
|
|
Pull io_uring updates from Jens Axboe:
"Here are the io_uring changes for this merge window. Light on new
features this time around (just splice + buffer selection), lots of
cleanups, fixes, and improvements to existing support. In particular,
this contains:
- Cleanup fixed file update handling for stack fallback (Hillf)
- Re-work of how pollable async IO is handled, we no longer require
thread offload to handle that. Instead we rely using poll to drive
this, with task_work execution.
- In conjunction with the above, allow expendable buffer selection,
so that poll+recv (for example) no longer has to be a split
operation.
- Make sure we honor RLIMIT_FSIZE for buffered writes
- Add support for splice (Pavel)
- Linked work inheritance fixes and optimizations (Pavel)
- Async work fixes and cleanups (Pavel)
- Improve io-wq locking (Pavel)
- Hashed link write improvements (Pavel)
- SETUP_IOPOLL|SETUP_SQPOLL improvements (Xiaoguang)"
* tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block: (54 commits)
io_uring: cleanup io_alloc_async_ctx()
io_uring: fix missing 'return' in comment
io-wq: handle hashed writes in chains
io-uring: drop 'free_pfile' in struct io_file_put
io-uring: drop completion when removing file
io_uring: Fix ->data corruption on re-enqueue
io-wq: close cancel gap for hashed linked work
io_uring: make spdxcheck.py happy
io_uring: honor original task RLIMIT_FSIZE
io-wq: hash dependent work
io-wq: split hashing and enqueueing
io-wq: don't resched if there is no work
io-wq: remove duplicated cancel code
io_uring: fix truncated async read/readv and write/writev retry
io_uring: dual license io_uring.h uapi header
io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled
io_uring: Fix unused function warnings
io_uring: add end-of-bits marker and build time verify it
io_uring: provide means of removing buffers
io_uring: add IOSQE_BUFFER_SELECT support for IORING_OP_RECVMSG
...
|
|
If outer_proto is not set, GCC warning as following:
In file included from net/netfilter/ipvs/ip_vs_core.c:52:
net/netfilter/ipvs/ip_vs_core.c: In function 'ip_vs_in_icmp':
include/net/ip_vs.h:233:4: warning: 'outer_proto' may be used uninitialized in this function [-Wmaybe-uninitialized]
233 | printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \
| ^~~~~~
net/netfilter/ipvs/ip_vs_core.c:1666:8: note: 'outer_proto' was declared here
1666 | char *outer_proto;
| ^~~~~~~~~~~
Fixes: 73348fed35d0 ("ipvs: optimize tunnel dumps for icmp errors")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
I got a problem on MIPS with Big-Endian is turned on: every time when
NF trying to change TCP MSS it returns because of new.v16 was greater
than old.v16. But real MSS was 1460 and my rule was like this:
add rule table chain tcp option maxseg size set 1400
And 1400 is lesser that 1460, not greater.
Later I founded that main causer is cast from u32 to __be16.
Debugging:
In example MSS = 1400(HEX: 0x578). Here is representation of each byte
like it is in memory by addresses from left to right(e.g. [0x0 0x1 0x2
0x3]). LE — Little-Endian system, BE — Big-Endian, left column is type.
LE BE
u32: [78 05 00 00] [00 00 05 78]
As you can see, u32 representation will be casted to u16 from different
half of 4-byte address range. But actually nf_tables uses registers and
store data of various size. Actually TCP MSS stored in 2 bytes. But
registers are still u32 in definition:
struct nft_regs {
union {
u32 data[20];
struct nft_verdict verdict;
};
};
So, access like regs->data[priv->sreg] exactly u32. So, according to
table presents above, per-byte representation of stored TCP MSS in
register will be:
LE BE
(u32)regs->data[]: [78 05 00 00] [05 78 00 00]
^^ ^^
We see that register uses just half of u32 and other 2 bytes may be
used for some another data. But in nft_exthdr_tcp_set_eval() it casted
just like u32 -> __be16:
new.v16 = src
But u32 overfill __be16, so it get 2 low bytes. For clarity draw
one more table(<xx xx> means that bytes will be used for cast).
LE BE
u32: [<78 05> 00 00] [00 00 <05 78>]
(u32)regs->data[]: [<78 05> 00 00] [05 78 <00 00>]
As you can see, for Little-Endian nothing changes, but for Big-endian we
take the wrong half. In my case there is some other data instead of
zeros, so new MSS was wrongly greater.
For shooting this bug I used solution for ports ranges. Applying of this
patch does not affect Little-Endian systems.
Signed-off-by: Sergey Marinkevich <sergey.marinkevich@eltex-co.ru>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-03-29
Here are a few more Bluetooth patches for the 5.7 kernel:
- Fix assumption of encryption key size when reading fails
- Add support for DEFER_SETUP with L2CAP Enhanced Credit Based Mode
- Fix issue with auto-connected devices
- Fix suspend handling when entering the state fails
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The approach taken to pass the port policer methods on to drivers is
pragmatic. It is similar to the port mirroring implementation (in that
the DSA core does all of the filter block interaction and only passes
simple operations for the driver to implement) and dissimilar to how
flow-based policers are going to be implemented (where the driver has
full control over the flow_cls_offload data structure).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make room for other actions for the matchall filter by keeping the
mirred argument parsing self-contained in its own function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On low memory system, run time dumps can consume too much memory. Add
administrator ability to disable auto dumps per reporter as part of the
error flow handle routine.
This attribute is not relevant while executing
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET.
By default, auto dump is activated for any reporter that has a dump method,
as part of the reporter registration to devlink.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When health reporter is registered to devlink, devlink will implicitly set
auto recover if and only if the reporter has a recover method. No reason
to explicitly get the auto recover flag from the driver.
Remove this flag from all drivers that called
devlink_health_reporter_create.
All existing health reporters set auto recovery to true if they have a
recover method.
Yet, administrator can unset auto recover via netlink command as prior to
this patch.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The rest of the devlink code sets the extack message using
NL_SET_ERR_MSG_MOD. Change the existing appearances of NL_SET_ERR_MSG
to NL_SET_ERR_MSG_MOD.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|