Age | Commit message (Collapse) | Author | Files | Lines |
|
Since dsa_port_devlink_setup() and dsa_port_devlink_teardown() are
already called from code paths which only execute once per port (due to
the existing bool dp->setup), keeping another dp->devlink_port_setup is
redundant, because we can already manage to balance the calls properly
(and not call teardown when setup was never called, or call setup twice,
or things like that).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3122433eb533 ("net: dsa: Register devlink ports before calling DSA driver setup()")
moved devlink port setup to be done early before driver setup()
was called. That is no longer needed, so move the devlink port
initialization back to dsa_port_setup(), as the first thing done there.
Note there is no longer needed to reinit port as unused if
dsa_port_setup() fails, as it unregisters the devlink port instance on
the error path.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a desire to simplify the dsa_port registration path with
devlink, and this involves reworking a bit how user ports which fail to
connect to their PHY (because it's missing) get reinitialized as UNUSED
devlink ports.
The desire is for the change to look something like this; basically
dsa_port_setup() has failed, we just change dp->type and call
dsa_port_setup() again.
-/* Destroy the current devlink port, and create a new one which has the UNUSED
- * flavour.
- */
-static int dsa_port_reinit_as_unused(struct dsa_port *dp)
+static int dsa_port_setup_as_unused(struct dsa_port *dp)
{
- dsa_port_devlink_teardown(dp);
dp->type = DSA_PORT_TYPE_UNUSED;
- return dsa_port_devlink_setup(dp);
+ return dsa_port_setup(dp);
}
For an UNUSED port, dsa_port_setup() mostly only calls dsa_port_devlink_setup()
anyway, so we could get away with calling just that. But if we call the
full blown dsa_port_setup(dp) (which will be needed to properly set
dp->setup = true), the callee will have the tendency to go through this
code block too, and call dsa_port_disable(dp):
switch (dp->type) {
case DSA_PORT_TYPE_UNUSED:
dsa_port_disable(dp);
break;
That is not very good, because dsa_port_disable() has this hidden inside
of it:
if (dp->pl)
phylink_stop(dp->pl);
Fact is, we are not prepared to handle a call to dsa_port_disable() with
a struct dsa_port that came from a previous (and failed) call to
dsa_port_setup(). We do not clean up dp->pl, and this will make the
second call to dsa_port_setup() call phylink_stop() on a dangling dp->pl
pointer.
Solve this by creating an API for phylink destruction which is symmetric
to the phylink creation, and never leave dp->pl set to anything except
NULL or a valid phylink structure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
registered area
Move port_setup() op to be called before devlink_port_register() and
port_teardown() after devlink_port_unregister().
Note it makes sense to move this alongside the rest of the devlink port
code, the reinit() function also gets much nicer, as clearly the fact that
port_setup()->devlink_port_region_create() was called in dsa_port_setup
did not fit the flow.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pre-register/post-unregister functions
Lifetime of some of the devlink objects, like regions, is currently
forced to be different for devlink instance and devlink port instance
(per-port regions). The reason is that for devlink ports, the internal
structures initialization happens only after devlink_port_register() is
called.
To resolve this inconsistency, introduce new set of helpers to allow
driver to initialize devlink pointer and region list before
devlink_register() is called. That allows port regions to be created
before devlink port registration and destroyed after devlink
port unregistration.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of relying on devlink pointer not being initialized, introduce
an extra flag to indicate if devlink port is registered. This is needed
as later on devlink pointer is going to be initialized even in case
devlink port is not registered yet.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of checking devlink_port->devlink pointer for not being NULL
which indicates that devlink port is registered, put this check to new
pair of helpers similar to what we have for devlink and use them in
other functions.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next
- Add RTL8761BUV device (Edimax BT-8500)
- Add a new PID/VID 13d3/3583 for MT7921
- Add Realtek RTL8852C support ID 0x13D3:0x3592
- Add VID/PID 0489/e0e0 for MediaTek MT7921
- Add a new VID/PID 0e8d/0608 for MT7921
- Add a new PID/VID 13d3/3578 for MT7921
- Add BT device 0cb8:c549 from RTW8852AE
- Add support for Intel Magnetor
* tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (49 commits)
Bluetooth: hci_sync: Fix not indicating power state
Bluetooth: L2CAP: Fix user-after-free
Bluetooth: Call shutdown for HCI_USER_CHANNEL
Bluetooth: Prevent double register of suspend
Bluetooth: hci_core: Fix not handling link timeouts propertly
Bluetooth: hci_event: Make sure ISO events don't affect non-ISO connections
Bluetooth: hci_debugfs: Fix not checking conn->debugfs
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
Bluetooth: MGMT: fix zalloc-simple.cocci warnings
Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works
Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release
Bluetooth: hci_sync: allow advertise when scan without RPA
Bluetooth: btusb: Add a new VID/PID 0e8d/0608 for MT7921
Bluetooth: btusb: Add a new PID/VID 13d3/3583 for MT7921
Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev()
Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk
Bluetooth: btintel: Add support for Magnetor
Bluetooth: btusb: Add a new PID/VID 13d3/3578 for MT7921
...
====================
Link: https://lore.kernel.org/r/20221001004602.297366-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 9c5d03d36251 ("genetlink: start to validate reserved header bytes")
introduced extra validation for genetlink headers. We had to gate it
to only apply to new commands, to maintain bug-wards compatibility.
Use this opportunity (before the new checks make it to Linus's tree)
to add more conditions.
Validate that Generic Netlink families do not use nlmsg_flags outside
of the well-understood set.
Link: https://lore.kernel.org/all/20220928073709.1b93b74a@kernel.org/
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20220929142809.1167546-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting power state using legacy/non-mgmt API
(e.g hcitool hci0 up) the likes of mgmt_set_powered_complete won't be
called causing clients of the MGMT API to not be notified of the change
of the state.
Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers should be aware of the range of valid UMEM chunk sizes to be
able to allocate their internal structures of an appropriate size. It
will be used by mlx5e in the following patches.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
CC: "Björn Töpel" <bjorn@kernel.org>
CC: Magnus Karlsson <magnus.karlsson@intel.com>
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There should be no space before the comma
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As 2.5G, 5G ethernet ports are more common and affordable,
these ports are being used in LAN bridge devices.
STP port_cost() is missing path_cost assignment for these link speeds,
causes highest cost 100 being used.
This result in lower speed port being picked
when there is loop between 5G and 1G ports.
Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100
Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100
speed greater than 10G = 1
Signed-off-by: Steven Hsieh <steven.hsieh@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data
types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the
existence of a per traffic class limitation of maximum frame sizes, with
a fallback on the port-based MTU.
As far as I am able to understand, the 802.1Q Service Data Unit (SDU)
represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding
any number of prepended VLAN headers which may be otherwise present in
the MSDU. Therefore, the queueMaxSDU is directly comparable to the
device MTU (1500 means L2 payload sizes are accepted, or frame sizes of
1518 octets, or 1522 plus one VLAN header). Drivers which offload this
are directly responsible of translating into other units of measurement.
To keep the fast path checks optimized, we keep 2 arrays in the qdisc,
one for max_sdu translated into frame length (so that it's comparable to
skb->len), and another for offloading and for dumping back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding optional new features to Qdisc offloads, existing drivers
must reject the new configuration until they are coded up to act on it.
Since modifying all drivers in lockstep with the changes in the Qdisc
can create problems of its own, it would be nice if there existed an
automatic opt-in mechanism for offloading optional features.
Jakub proposes that we multiplex one more kind of call through
ndo_setup_tc(): one where the driver populates a Qdisc-specific
capability structure.
First user will be taprio in further changes. Here we are introducing
the definitions for the base functionality.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 09b5678c778f("tipc: remove dead code in tipc_net and relatives"),
struct distr_queue_item is not used any more and can be removed as well.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220928085636.71749-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 3226b158e67c ("net: avoid 32 x truesize under-estimation
for tiny skbs") we are observing 10-20% regressions in performance
tests with small packets. The perf trace points to high pressure on
the slab allocator.
This change tries to improve the allocation schema for small packets
using an idea originally suggested by Eric: a new per CPU page frag is
introduced and used in __napi_alloc_skb to cope with small allocation
requests.
To ensure that the above does not lead to excessive truesize
underestimation, the frag size for small allocation is inflated to 1K
and all the above is restricted to build with 4K page size.
Note that we need to update accordingly the run-time check introduced
with commit fd9ea57f4e95 ("net: add napi_get_frags_check() helper").
Alex suggested a smart page refcount schema to reduce the number
of atomic operations and deal properly with pfmemalloc pages.
Under small packet UDP flood, I measure a 15% peak tput increases.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Alexander H Duyck <alexanderduyck@fb.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/6b6f65957c59f86a353fc09a5127e83a32ab5999.1664350652.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), use unsafe_memcpy(), as the sizing,
bounds-checking, and allocation are all very tightly coupled here.
This silences the false-positive reported by syzbot:
memcpy: detected field-spanning write (size 80) of single field "&n->sel" at net/sched/cls_u32.c:1043 (size 16)
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reported-by: syzbot+a2c4601efc75848ba321@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/000000000000a96c0b05e97f0444@google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220927153700.3071688-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This uses l2cap_chan_hold_unless_zero() after calling
__l2cap_get_chan_blah() to prevent the following trace:
Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref
*kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mutex.c:191 [inline]
BUG: KASAN: use-after-free in __mutex_lock_common
kernel/locking/mutex.c:671 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400
kernel/locking/mutex.c:729
Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389
Link: https://lore.kernel.org/lkml/20220622082716.478486-1-lee.jones@linaro.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi and can.
Current release - regressions:
- phy: don't WARN for PHY_UP state in mdio_bus_phy_resume()
- wifi: fix locking in mac80211 mlme
- eth:
- revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"
- mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
Previous releases - regressions:
- wifi: fix regression with non-QoS drivers
Previous releases - always broken:
- mptcp: fix unreleased socket in accept queue
- wifi:
- don't start TX with fq->lock to fix deadlock
- fix memory corruption in minstrel_ht_update_rates()
- eth:
- macb: fix ZynqMP SGMII non-wakeup source resume failure
- mt7531: only do PLL once after the reset
- usbnet: fix memory leak in usbnet_disconnect()
Misc:
- usb: qmi_wwan: add new usb-id for Dell branded EM7455"
* tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
mptcp: fix unreleased socket in accept queue
mptcp: factor out __mptcp_close() without socket lock
net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2}
net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge
can: c_can: don't cache TX messages for C_CAN cores
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
selftests: Fix the if conditions of in test_extra_filter()
net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()
net: stmmac: power up/down serdes in stmmac_open/release
wifi: mac80211: mlme: Fix double unlock on assoc success handling
wifi: mac80211: mlme: Fix missing unlock on beacon RX
wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
wifi: mac80211: fix regression with non-QoS drivers
wifi: mac80211: ensure vif queues are operational after start
wifi: mac80211: don't start TX with fq->lock to fix deadlock
wifi: cfg80211: fix MCS divisor value
net: hippi: Add missing pci_disable_device() in rr_init_one()
net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
...
|
|
The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.
While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.
This can be reproduced easily with following steps:
1. create 2 namespace and veth:
$ ip netns add mptcp-client
$ ip netns add mptcp-server
$ sysctl -w net.ipv4.conf.all.rp_filter=0
$ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
$ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
$ ip link add red-client netns mptcp-client type veth peer red-server \
netns mptcp-server
$ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
$ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
$ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
$ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
$ ip -n mptcp-server link set red-server up
$ ip -n mptcp-client link set red-client up
2. configure the endpoint and limit for client and server:
$ ip -n mptcp-server mptcp endpoint flush
$ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint flush
$ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
1 subflow
3. listen and accept on a port, such as 9999. The nc command we used
here is modified, which makes it use mptcp protocol by default.
$ ip netns exec mptcp-server nc -l -k -p 9999
4. open another *two* terminal and use each of them to connect to the
server with the following command:
$ ip netns exec mptcp-client nc 10.0.0.1 9999
Input something after connect to trigger the connection of the second
subflow. So that there are two established mptcp connections, with the
second one still unaccepted.
5. exit all the nc command, and check the tcp socket in server namespace.
And you will find that there is one tcp socket in CLOSE_WAIT state
and can't release forever.
Fix this by closing all of the unaccepted mptcp socket in
mptcp_subflow_queue_clean() with __mptcp_close().
Now, we can ensure that all unaccepted mptcp sockets will be cleaned by
__mptcp_close() before they are released, so mptcp_sock_destruct(), which
is used to clean the unaccepted mptcp socket, is not needed anymore.
The selftests for mptcp is ran for this commit, and no new failures.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed9045071 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Factor out __mptcp_close() from mptcp_close(). The caller of
__mptcp_close() should hold the socket lock, and cancel mptcp work when
__mptcp_close() returns true.
This function will be used in the next commit.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed9045071 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The v6_rcv_saddr and rcv_saddr are inside a union in the
'struct inet_bind2_bucket'. When searching a bucket by following the
bhash2 hashtable chain, eg. inet_bind2_bucket_match, it is only using
the sk->sk_family and there is no way to check if the inet_bind2_bucket
has a v6 or v4 address in the union. This leads to an uninit-value
KMSAN report in [0] and also potentially incorrect matches.
This patch fixes it by adding a family member to the inet_bind2_bucket
and then tests 'sk->sk_family != tb->family' before matching
the sk's address to the tb's address.
Cc: Joanne Koong <joannelkoong@gmail.com>
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20220927002544.3381205-1-kafai@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If fastopen is used, poll must allow a first write that will trigger
the SYN+data
Similar to what is done in tcp_poll().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When TCP_FASTOPEN_CONNECT has been set on the socket before a connect,
the defer flag is set and must be handled when sendmsg is called.
This is similar to what is done in tcp_sendmsg_locked().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It will be used to support TCP FastOpen with MPTCP in the following
commit.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set the option for the first subflow only. For the other subflows TFO
can't be used because a mapping would be needed to cover the data in the
SYN.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can benefit from a smaller struct ubuf_info, so leave only mandatory
fields and let users to decide how they want to extend it. Convert
MSG_ZEROCOPY to struct ubuf_info_msgzc and remove duplicated fields.
This reduces the size from 48 bytes to just 16.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some drivers depend on shutdown being called for proper operation.
Unset HCI_USER_CHANNEL and call the full close routine since shutdown is
complementary to setup.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Suspend notifier should only be registered and unregistered once per
hdev. Simplify this by only registering during driver registration and
simply exiting early when HCI_USER_CHANNEL is set.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 359ee4f834f5 (Bluetooth: Unregister suspend with userchannel)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts commit 1d0403d20f6c281cb3d14c5f1db5317caeec48e9.
Anatoly Pugachev reported that the commit 1d0403d20f6c ("net: set proper
memcg for net_init hooks allocations") is somehow causing the sparc64
VMs failed to boot and the VMs boot fine with that patch reverted. So,
revert the patch for now and later we can debug the issue.
Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Vasily Averin <vvs@openvz.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: cgroups@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Fixes: 1d0403d20f6c ("net: set proper memcg for net_init hooks allocations")
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Analogous to commit b575b24b8eee3 ("netfilter: Fix rpfilter
dropping vrf packets by mistake") but for nftables fib expression:
Add special treatment of VRF devices so that typical reverse path
filtering via 'fib saddr . iif oif' expression works as expected.
Fixes: f6d0cbcf09c50 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Both is_bpf and is_ebpf are boolean types, so
(!is_bpf && !is_ebpf) || (is_bpf && is_ebpf) can be reduced to
is_bpf == is_ebpf in tcf_bpf_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enumerate the skb drop reasons in the receive path for IPv6 UDP packets.
Signed-off-by: Donald Hunter <donald.hunter@redhat.com>
Link: https://lore.kernel.org/r/20220926120350.14928-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFC 6209 describes ARIA for TLS 1.2.
ARIA-128-GCM and ARIA-256-GCM are defined in RFC 6209.
This patch would offer performance increment and an opportunity for
hardware offload.
Benchmark results:
iperf-ssl are used.
CPU: intel i3-12100.
TLS(openssl-3.0-dev)
[ 3] 0.0- 1.0 sec 185 MBytes 1.55 Gbits/sec
[ 3] 1.0- 2.0 sec 186 MBytes 1.56 Gbits/sec
[ 3] 2.0- 3.0 sec 186 MBytes 1.56 Gbits/sec
[ 3] 3.0- 4.0 sec 186 MBytes 1.56 Gbits/sec
[ 3] 4.0- 5.0 sec 186 MBytes 1.56 Gbits/sec
[ 3] 0.0- 5.0 sec 927 MBytes 1.56 Gbits/sec
kTLS(aria-generic)
[ 3] 0.0- 1.0 sec 198 MBytes 1.66 Gbits/sec
[ 3] 1.0- 2.0 sec 194 MBytes 1.62 Gbits/sec
[ 3] 2.0- 3.0 sec 194 MBytes 1.63 Gbits/sec
[ 3] 3.0- 4.0 sec 194 MBytes 1.63 Gbits/sec
[ 3] 4.0- 5.0 sec 194 MBytes 1.62 Gbits/sec
[ 3] 0.0- 5.0 sec 974 MBytes 1.63 Gbits/sec
kTLS(aria-avx wirh GFNI)
[ 3] 0.0- 1.0 sec 632 MBytes 5.30 Gbits/sec
[ 3] 1.0- 2.0 sec 657 MBytes 5.51 Gbits/sec
[ 3] 2.0- 3.0 sec 657 MBytes 5.51 Gbits/sec
[ 3] 3.0- 4.0 sec 656 MBytes 5.50 Gbits/sec
[ 3] 4.0- 5.0 sec 656 MBytes 5.50 Gbits/sec
[ 3] 0.0- 5.0 sec 3.18 GBytes 5.47 Gbits/sec
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/20220925150033.24615-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A few late-comer fixes:
* locking in mac80211 MLME
* non-QoS driver crash/regression
* minstrel memory corruption
* TX deadlock
* TX queues not always enabled
* HE/EHT bitrate calculation
* tag 'wireless-2022-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: mlme: Fix double unlock on assoc success handling
wifi: mac80211: mlme: Fix missing unlock on beacon RX
wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
wifi: mac80211: fix regression with non-QoS drivers
wifi: mac80211: ensure vif queues are operational after start
wifi: mac80211: don't start TX with fq->lock to fix deadlock
wifi: cfg80211: fix MCS divisor value
====================
Link: https://lore.kernel.org/r/20220927135923.45312-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change that introduced the use of __check_timeout did not account for
link types properly, it always assumes ACL_LINK is used thus causing
hdev->acl_last_tx to be used even in case of LE_LINK and then again
uses ACL_LINK with hci_link_tx_to.
To fix this __check_timeout now takes the link type as parameter and
then procedure to use the right last_tx based on the link type and pass
it to hci_link_tx_to.
Fixes: 1b1d29e51499 ("Bluetooth: Make use of __check_timeout on hci_sched_le")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: David Beinder <david@beinder.at>
|
|
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated. This
split already existed for the "firstfrag" case, so just generalize the
logic further.
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220924040835.3364912-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the previous commit, the Netlink interface of the OVS
conntrack module was restricted to global CAP_NET_ADMIN by using
GENL_ADMIN_PERM. This is changed to GENL_UNS_ADMIN_PERM to support
unprivileged containers in non-initial user namespace.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Netlink interface for metering was restricted to global CAP_NET_ADMIN
by using GENL_ADMIN_PERM. To allow metring in a non-inital user namespace,
e.g., a container, this is changed to GENL_UNS_ADMIN_PERM.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 6911458dc428 ("wifi: mac80211: mlme: refactor assoc success
handling") moved the per-link setup out of ieee80211_assoc_success() into a
new function ieee80211_assoc_config_link() but missed to remove the unlock
of 'sta_mtx' in case of HE capability/operation missing on HE AP, which
leads to a double unlock:
ieee80211_assoc_success() {
...
ieee80211_assoc_config_link() {
...
if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
(!elems->he_cap || !elems->he_operation)) {
mutex_unlock(&sdata->local->sta_mtx);
...
}
...
}
...
mutex_unlock(&sdata->local->sta_mtx);
...
}
Fixes: 6911458dc428 ("wifi: mac80211: mlme: refactor assoc success handling")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220925143420.784975-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 98b0b467466c ("wifi: mac80211: mlme: use correct link_sta")
switched to link station instead of deflink and added some checks to do
that, which are done with the 'sta_mtx' mutex held. However, the error
path of these checks does not unlock 'sta_mtx' before returning.
Fixes: 98b0b467466c ("wifi: mac80211: mlme: use correct link_sta")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220924184042.778676-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
During our testing of WFM200 module over SDIO on i.MX6Q-based platform,
we discovered a memory corruption on the system, tracing back to the wfx
driver. Using kfence, it was possible to trace it back to the root
cause, which is hw->max_rates set to 8 in wfx_init_common,
while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4.
This causes array out-of-bounds writes during updates of the rate table,
as seen below:
BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c
Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00
0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81):
kfree_rcu_work+0x320/0x36c
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c
0x0
kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64
allocated by task 297 on cpu 0 at 631.039555s:
minstrel_ht_update_rates+0x38/0x2b0 [mac80211]
rate_control_tx_status+0xb4/0x148 [mac80211]
ieee80211_tx_status_ext+0x364/0x1030 [mac80211]
ieee80211_tx_status+0xe0/0x118 [mac80211]
ieee80211_tasklet_handler+0xb0/0xe0 [mac80211]
tasklet_action_common.constprop.0+0x11c/0x148
__do_softirq+0x1a4/0x61c
irq_exit+0xcc/0x104
call_with_stack+0x18/0x20
__irq_svc+0x80/0xb0
wq_worker_sleeping+0x10/0x100
wq_worker_sleeping+0x10/0x100
schedule+0x50/0xe0
schedule_timeout+0x2e0/0x474
wait_for_completion+0xdc/0x1ec
mmc_wait_for_req_done+0xc4/0xf8
mmc_io_rw_extended+0x3b4/0x4ec
sdio_io_rw_ext_helper+0x290/0x384
sdio_memcpy_toio+0x30/0x38
wfx_sdio_copy_to_io+0x88/0x108 [wfx]
wfx_data_write+0x88/0x1f0 [wfx]
bh_work+0x1c8/0xcc0 [wfx]
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c 0x0
After discussion on the wireless mailing list it was clarified
that the issue has been introduced by:
commit ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates")
and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c.
Fixes: ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates")
Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/
Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Drobiński <krzysztof.drobinski@camlingroup.com>,
Signed-off-by: Paweł Lenkow <pawel.lenkow@camlingroup.com>
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port")
changed ieee80211_tx_control_port() to aways call
__ieee80211_select_queue() without checking local->hw.queues.
__ieee80211_select_queue() returns a queue-id between 0 and 3, which means
that now ieee80211_tx_control_port() may end up setting the queue-mapping
for a skb to a value higher then local->hw.queues if local->hw.queues
is less then 4.
Specifically this is a problem for ralink rt2500-pci cards where
local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.
Other callers of __ieee80211_select_queue() skip calling it when
local->hw.queues < IEEE80211_NUM_ACS, add the same check to
ieee80211_tx_control_port(). This fixes ralink rt2500-pci and
similar cards when less then 4 tx-queues no longer working.
Fixes: 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port")
Cc: Markus Theil <markus.theil@tu-ilmenau.de>
Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Make sure local->queue_stop_reasons and vif.txqs_stopped stay in sync.
When a new vif is created the queues may end up in an inconsistent state
and be inoperable:
Communication not using iTXQ will work, allowing to e.g. complete the
association. But the 4-way handshake will time out. The sta will not
send out any skbs queued in iTXQs.
All normal attempts to start the queues will fail when reaching this
state.
local->queue_stop_reasons will have marked all queues as operational but
vif.txqs_stopped will still be set, creating an inconsistent internal
state.
In reality this seems to be race between the mac80211 function
ieee80211_do_open() setting SDATA_STATE_RUNNING and the wake_txqs_tasklet:
Depending on the driver and the timing the queues may end up to be
operational or not.
Cc: stable@vger.kernel.org
Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220915130946.302803-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|