summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2019-03-29net: bridge: use netif_is_bridge_port()Julian Wiedmann4-9/+7
Replace the br_port_exists() macro with its twin from netdevice.h CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29openvswitch: Make metadata_dst tunnel work in IP_TUNNEL_INFO_BRIDGE modewenxu1-10/+36
There is currently no support for the multicast/broadcast aspects of VXLAN in ovs. In the datapath flow the tun_dst must specific. But in the IP_TUNNEL_INFO_BRIDGE mode the tun_dst can not be specific. And the packet can forward through the fdb table of vxlan devcice. In this mode the broadcast/multicast packet can be sent through the following ways in ovs. ovs-vsctl add-port br0 vxlan -- set in vxlan type=vxlan \ options:key=1000 options:remote_ip=flow ovs-ofctl add-flow br0 in_port=LOCAL,dl_dst=ff:ff:ff:ff:ff:ff, \ action=output:vxlan bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.1 \ src_vni 1000 vni 1000 self bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.2 \ src_vni 1000 vni 1000 self Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29tcp: cleanup sk_tx_skb_cache before reuseEric Dumazet1-0/+2
TCP stack relies on the fact that a freshly allocated skb has skb->cb[] and skb_shinfo(skb)->tx_flags cleared. When recycling tx skb, we must ensure these fields are cleared. Fixes: 472c2e07eef0 ("tcp: add one skb cache for tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Move ipv6 stubs to a separate header fileDavid Ahern7-3/+7
The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29net: Use common nexthop init and release helpersDavid Ahern2-37/+44
With fib_nh_common in place, move common initialization and release code into helpers used by both ipv4 and ipv6. For the moment, the init is just the lwt encap and the release is both the netdev reference and the the lwt state reference. More will be added later. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29net: Add fib_nh_common and update fib_nh and fib6_nhDavid Ahern2-1/+9
Add fib_nh_common struct with common nexthop attributes. Convert fib_nh and fib6_nh to use it. Use macros to move existing fib_nh_* references to the new nh_common.nhc_*. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Rename fib6_nh entriesDavid Ahern5-97/+104
Rename fib6_nh entries that will be moved to a fib_nh_common struct. Specifically, the device, gateway, flags, and lwtstate are common with all nexthop definitions. In some places new temporary variables are declared or local variables renamed to maintain line lengths. Rename only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv4: Rename fib_nh entriesDavid Ahern5-138/+139
Rename fib_nh entries that will be moved to a fib_nh_common struct. Specifically, the device, oif, gateway, flags, scope, lwtstate, nh_weight and nh_upper_bound are common with all nexthop definitions. In the process shorten fib_nh_lwtstate to fib_nh_lws to avoid really long lines. Rename only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Change rt6_add_nexthop and rt6_nexthop_info to take fib6_nhDavid Ahern1-19/+20
rt6_add_nexthop and rt6_nexthop_info only need the fib6_info for the gateway flag and the nexthop weight, and the presence of a gateway is now per-nexthop. Update the signatures to take a fib6_nh and nexthop weight and better align with the ipv4 versions. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Refactor fib6_ignore_linkdownDavid Ahern1-18/+3
fib6_ignore_linkdown takes a fib6_info but only looks at the net_device and its IPv6 config. Change it to take a net_device over a fib6_info as its input argument. In addition, move it to a header file to make the check inline and usable later with IPv4 code without going through the ipv6 stub, and rename to ip6_ignore_linkdown since it is only checking the setting based on the ipv6 struct on a device. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Move gateway checks to a fib6_nh settingDavid Ahern4-26/+36
The gateway setting is not per fib6_info entry but per-fib6_nh. Add a new fib_nh_has_gw flag to fib6_nh and convert references to RTF_GATEWAY to the new flag. For IPv6 address the flag is cheaper than checking that nh_gw is non-0 like IPv4 does. While this increases fib6_nh by 8-bytes, the effective allocation size of a fib6_info is unchanged. The 8 bytes is recovered later with a fib_nh_common change. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Create cleanup helper for fib6_nhDavid Ahern2-4/+9
Move the fib6_nh cleanup code to a new helper, fib6_nh_release. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Create init helper for fib6_nhDavid Ahern1-108/+141
Similar to IPv4, consolidate the fib6_nh initialization into a helper. As a new standalone function, add a cleanup path to put lwtstate on error. To avoid modifying fib6_config flags, move the reject check to a helper that is invoked once by fib6_nh_init to reset the device and then again in ip6_route_info_create to set the fib6_flags. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv4: Create cleanup helper for fib_nhDavid Ahern1-12/+17
Move the fib_nh cleanup code from free_fib_info_rcu into a new helper, fib_nh_release. Move classid accounting into fib_nh_release which is called per fib_nh to make accounting symmetrical with fib_nh_init. Export the helper to allow for use with nexthop objects in the future. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv4: Create init helper for fib_nhDavid Ahern1-89/+91
Consolidate the fib_nh initialization which is duplicated between fib_create_info for single path and fib_get_nhs for multipath. Export the helper to allow for use with nexthop objects in the future. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv4: Move IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN to helperDavid Ahern2-27/+8
in_dev lookup followed by IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN check is called in several places, some with the rcu lock and others with the rtnl held. Move the check to a helper similar to what IPv6 has. Since the helper can be invoked from either context use rcu_dereference_rtnl to dereference ip_ptr. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv4: Define fib_get_nhs when CONFIG_IP_ROUTE_MULTIPATH is disabledDavid Ahern1-6/+9
Define fib_get_nhs to return EINVAL when CONFIG_IP_ROUTE_MULTIPATH is not enabled and remove the ifdef check for CONFIG_IP_ROUTE_MULTIPATH in fib_create_info. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28openvswitch: Add timeout support to ct actionYi-Hung Wei1-1/+29
Add support for fine-grain timeout support to conntrack action. The new OVS_CT_ATTR_TIMEOUT attribute of the conntrack action specifies a timeout to be associated with this connection. If no timeout is specified, it acts as is, that is the default timeout for the connection will be automatically applied. Example usage: $ nfct timeout add timeout_1 inet tcp syn_sent 100 established 200 $ ovs-ofctl add-flow br0 in_port=1,ip,tcp,action=ct(commit,timeout=timeout_1) CC: Pravin Shelar <pshelar@ovn.org> CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28netfilter: Export nf_ct_{set,destroy}_timeout()Yi-Hung Wei2-87/+95
This patch exports nf_ct_set_timeout() and nf_ct_destroy_timeout(). The two functions are derived from xt_ct_destroy_timeout() and xt_ct_set_timeout() in xt_CT.c, and moved to nf_conntrack_timeout.c without any functional change. It would be useful for other users (i.e. OVS) that utilizes the finer-grain conntrack timeout feature. CC: Pablo Neira Ayuso <pablo@netfilter.org> CC: Pravin Shelar <pshelar@ovn.org> Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: devlink: add warning for ndo_get_phys_port_name set when not neededJiri Pirko1-0/+18
Currently if the driver registers devlink port instance, it should set the devlink port attributes as well. Then the devlink core is able to obtain physical port name itself, no need for driver to implement the ndo. Once all drivers will implement devlink port registration, this ndo should be removed. This warning guides new drivers to do things as they should be done. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28dsa: do not support ndo_get_phys_port_name for non-legacy portsJiri Pirko1-0/+7
Since each non-legacy slave has its own devlink port instance correctly set, rely on devlink core to generate correct phys port name. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28dsa: implement ndo_get_devlink_portJiri Pirko1-0/+8
In order for devlink compat functions to work, implement ndo_get_devlink_port. Legacy slaves does not have devlink port instances created for themselves. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: devlink: remove unused devlink_port_get_phys_port_name() functionJiri Pirko1-7/+0
Now it is unused, remove it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: devlink: introduce devlink_compat_phys_port_name_get()Jiri Pirko2-5/+34
Introduce devlink_compat_phys_port_name_get() helper that gets the physical port name for specified netdevice according to devlink port attributes. Call this helper from dev_get_phys_port_name() in case ndo_get_phys_port_name is not defined. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28Merge tag 'batadv-next-for-davem-20190328' of ↵David S. Miller61-825/+432
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - Drop license boilerplate (obsoleted by SPDX license IDs), by Sven Eckelmann - Drop documentation for sysfs and debugfs Documentation, by Sven Eckelmann (2 patches) - Mark sysfs as optional and deprecated, by Sven Eckelmann (3 patches) - Update MAINTAINERS Tree, Chat and Bugtracker, by Sven Eckelmann (3 patches) - Rename batadv_dat_send_data, by Sven Eckelmann - update DAT entries with incoming ARP replies, by Linus Luessing - add multicast-to-unicast support for limited destinations, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller49-223/+520
2019-03-27inet: switch IP ID generator to siphashEric Dumazet2-19/+23
According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Amit Klein <aksecurity@gmail.com> Reported-by: Benny Pinkas <benny@pinkas.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27tcp: fix zerocopy and notsent_lowat issuesEric Dumazet1-10/+3
My recent patch had at least three problems : 1) TX zerocopy wants notification when skb is acknowledged, thus we need to call skb_zcopy_clear() if the skb is cached into sk->sk_tx_skb_cache 2) Some applications might expect precise EPOLLOUT notifications, so we need to update sk->sk_wmem_queued and call sk_mem_uncharge() from sk_wmem_free_skb() in all cases. The SOCK_QUEUE_SHRUNK flag must also be set. 3) Reuse of saved skb should have used skb_cloned() instead of simply checking if the fast clone has been freed. Fixes: 472c2e07eef0 ("tcp: add one skb cache for tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: openvswitch: Add a new action check_pkt_lenNuman Siddique2-0/+219
This patch adds a new action - 'check_pkt_len' which checks the packet length and executes a set of actions if the packet length is greater than the specified length or executes another set of actions if the packet length is lesser or equal to. This action takes below nlattrs * OVS_CHECK_PKT_LEN_ATTR_PKT_LEN - 'pkt_len' to check for * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER - Nested actions to apply if the packet length is greater than the specified 'pkt_len' * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL - Nested actions to apply if the packet length is lesser or equal to the specified 'pkt_len'. The main use case for adding this action is to solve the packet drops because of MTU mismatch in OVN virtual networking solution. When a VM (which belongs to a logical switch of OVN) sends a packet destined to go via the gateway router and if the nic which provides external connectivity, has a lesser MTU, OVS drops the packet if the packet length is greater than this MTU. With the help of this action, OVN will check the packet length and if it is greater than the MTU size, it will generate an ICMP packet (type 3, code 4) and includes the next hop mtu in it so that the sender can fragment the packets. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-July/047039.html Suggested-by: Ben Pfaff <blp@ovn.org> Signed-off-by: Numan Siddique <nusiddiq@redhat.com> CC: Gregory Rose <gvrose8192@gmail.com> CC: Pravin B Shelar <pshelar@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Tested-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27ethtool: add PHY Fast Link Down supportHeiner Kallweit1-0/+2
This adds support for Fast Link Down as new PHY tunable. Fast Link Down reduces the time until a link down event is reported for 1000BaseT. According to the standard it's 750ms what is too long for several use cases. v2: - add comment describing the constants Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net/core: Allow the compiler to verify declaration and definition consistencyBart Van Assche3-3/+19
Instead of declaring a function in a .c file, declare it in a header file and include that header file from the source files that define and that use the function. That allows the compiler to verify consistency of declaration and definition. See also commit 52267790ef52 ("sock: add MSG_ZEROCOPY") # v4.14. Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net/core: Fix rtnetlink kernel-doc headersBart Van Assche1-3/+6
This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net/core: Document __skb_flow_dissect() flags argumentBart Van Assche1-0/+2
This patch avoids that the following warning is reported when building with W=1: warning: Function parameter or member 'flags' not described in '__skb_flow_dissect' Cc: Tom Herbert <tom@herbertland.com> Fixes: cd79a2382aa5 ("flow_dissector: Add flags argument to skb_flow_dissector functions") # v4.3. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net/core: Document all dev_ioctl() argumentsBart Van Assche1-1/+2
This patch avoids that the following warnings are reported when building with W=1: net/core/dev_ioctl.c:378: warning: Function parameter or member 'ifr' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Function parameter or member 'need_copyout' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Excess function parameter 'arg' description in 'dev_ioctl' Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 44c02a2c3dc5 ("dev_ioctl(): move copyin/copyout to callers") # v4.16. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net/core: Document reuseport_add_sock() bind_inany argumentBart Van Assche1-0/+2
This patch avoids that the following warning is reported when building with W=1: warning: Function parameter or member 'bind_inany' not described in 'reuseport_add_sock' Cc: Martin KaFai Lau <kafai@fb.com> Fixes: 2dbb9b9e6df6 ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") # v4.19. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27fou: Support binding FoU socketKristian Evensen1-16/+122
An FoU socket is currently bound to the wildcard-address. While this works fine, there are several use-cases where the use of the wildcard-address is not desirable. For example, I use FoU on some multi-homed servers and would like to use FoU on only one of the interfaces. This commit adds support for binding FoU sockets to a given source address/interface, as well as connecting the socket to a given destination address/port. udp_tunnel already provides the required infrastructure, so most of the code added is for exposing and setting the different attributes (local address, peer address, etc.). The lookups performed when we add, delete or get an FoU-socket has also been updated to compare all the attributes a user can set. Since the comparison now involves several elements, I have added a separate comparison-function instead of open-coding. In order to test the code and ensure that the new comparison code works correctly, I started by creating a wildcard socket bound to port 1234 on my machine. I then tried to create a non-wildcarded socket bound to the same port, as well as fetching and deleting the socket (including source address, peer address or interface index in the netlink request). Both the create, fetch and delete request failed. Deleting/fetching the socket was only successful when my netlink request attributes matched those used to create the socket. I then repeated the tests, but with a socket bound to a local ip address, a socket bound to a local address + interface, and a bound socket that was also «connected» to a peer. Add only worked when no socket with the matching source address/interface (or wildcard) existed, while fetch/delete was only successful when all attributes matched. In addition to testing that the new code work, I also checked that the current behavior is kept. If none of the new attributes are provided, then an FoU-socket is configured as before (i.e., wildcarded). If any of the new attributes are provided, the FoU-socket is configured as expected. v1->v2: * Fixed building with IPv6 disabled (kbuild). * Fixed a return type warning and make the ugly comparison function more readable (kbuild). * Describe more in detail what has been tested (thanks David Miller). * Make peer port required if peer address is specified. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds54-280/+874
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
2019-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-51/+299
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-03-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) introduce bpf_tcp_check_syncookie() helper for XDP and tc, from Lorenz. 2) allow bpf_skb_ecn_set_ce() in tc, from Peter. 3) numerous bpf tc tunneling improvements, from Willem. 4) and other miscellaneous improvements from Adrian, Alan, Daniel, Ivan, Stanislav. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2-3/+13
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data() - fix mount/umount race in nlmclnt. - NFSv4.1 don't free interrupted slot on open Bugfixes: - Don't let RPC_SOFTCONN tasks time out if the transport is connected - Fix a typo in nfs_init_timeout_values() - Fix layoutstats handling during read failovers - fix uninitialized variable warning" * tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: fix uninitialized variable warning pNFS/flexfiles: Fix layoutstats handling during read failovers NFS: Fix a typo in nfs_init_timeout_values() SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected NFSv4.1 don't free interrupted slot on open NFS: fix mount/umount race in nlmclnt. NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
2019-03-26SUNRPC: fix uninitialized variable warningAlakesh Haloi1-2/+2
Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-26openvswitch: add seqadj extension when NAT is used.Flavio Leitner1-0/+6
When the conntrack is initialized, there is no helper attached yet so the nat info initialization (nf_nat_setup_info) skips adding the seqadj ext. A helper is attached later when the conntrack is not confirmed but is going to be committed. In this case, if NAT is needed then adds the seqadj ext as well. Fixes: 16ec3d4fbb96 ("openvswitch: Fix cached ct with helper.") Signed-off-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26tipc: fix return value check in tipc_mcast_send_sync()Wei Yongjun1-1/+1
Fix the return value check which testing the wrong variable in tipc_mcast_send_sync(). Fixes: c55c8edafa91 ("tipc: smooth change between replicast and broadcast") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: dsa: Avoid null pointer when failing to connect to PHYVladimir Oltean1-4/+4
When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the day by connecting to an alternative PHY, none other than a PHY on the switch's internal MDIO bus, at an address equal to the port's index. However this does not take into consideration the scenario when the switch that failed to probe an external PHY does not have an internal MDIO bus at all. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: devlink: skip info_get op call if it is not defined in dumpitJiri Pirko1-0/+5
In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf22882c60 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26tipc: change to check tipc_own_id to return in tipc_net_stopXin Long1-4/+1
When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: sched: Kconfig: update reference link for PIELeslie Monis1-2/+1
RFC 8033 replaces the IETF draft for PIE Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25batman-adv: Add multicast-to-unicast support for multiple targetsLinus Lüssing7-6/+245
With this patch multicast packets with a limited number of destinations (current default: 16) will be split and transmitted by the originator as individual unicast transmissions. Wifi broadcasts with their low bitrate are still a costly undertaking. In a mesh network this cost multiplies with the overall size of the mesh network. Therefore using multiple unicast transmissions instead of broadcast flooding is almost always less burdensome for the mesh network. The maximum amount of unicast packets can be configured via the newly introduced multicast_fanout parameter. If this limit is exceeded distribution will fall back to classic broadcast flooding. The multicast-to-unicast conversion is performed on the initial multicast sender node and counts on a final destination node, mesh-wide basis (and not next hop, neighbor node basis). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: allow updating DAT entry timeouts on incoming ARP RepliesLinus Lüssing1-1/+3
Currently incoming ARP Replies, for example via a DHT-PUT message, do not update the timeout for an already existing DAT entry. These ARP Replies are dropped instead. This however defeats the purpose of the DHCPACK snooping, for instance. Right now, a DAT entry in the DHT will be purged every five minutes, likely leading to a mesh-wide ARP Request broadcast after this timeout. Which then recreates the entry. The idea of the DHCPACK snooping is to be able to update an entry before a timeout happens, to avoid ARP Request flooding. This patch fixes this issue by updating a DAT entry on incoming ARP Replies even if a matching DAT entry already exists. While still filtering the ARP Reply towards the soft-interface, to avoid duplicate messages on the client device side. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Adjust name for batadv_dat_send_dataSven Eckelmann1-10/+14
The send functions in batman-adv are expected to consume the skb when either the data is queued up for the underlying driver or when some precondition failed. batadv_dat_send_data didn't do this and instead created a copy of the skb, modified it and queued the copy up for transmission. The caller has to take care that the skb is handled correctly (for example free'd) when batadv_dat_send_data returns. This unclear behavior already lead to memory leaks in the recent past. Renaming the function to batadv_dat_forward_data should make it easier to identify that the data is forwarded but the skb is not actually send+consumed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Warn about sysfs file accessSven Eckelmann1-0/+46
The sysfs files to read and modify the configuration settings were replaced by the batadv generic netlink family. They are also marked as obsolete in the ABI documentation. But not all users of this functionality might follow changes in the Documentation/ABI/obsolete/ folder. They might benefit from a warning messages about the deprecation of the functionality which they just tried to access batman_adv: [Deprecated]: batctl (pid 30381) Use of sysfs file "orig_interval". Use batadv genl family instead Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-13 19:29:43 +0000