summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2022-09-03wifi: mac80211: mlme: refactor QoS settings codeJohannes Berg2-13/+27
Refactor the code to apply QoS settings to the driver so we can call it on link switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix double SW scan stopJohannes Berg1-1/+1
When we stop a not-yet-started scan, we erroneously call into the driver, causing a sequence of sw_scan_start() followed by sw_scan_complete() twice. This will cause a warning in hwsim with next in line commit that validates the address passed to wmediumd/virtio. Fix this by doing the calls only if we were actually scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: assign link address correctlyJohannes Berg1-3/+2
Right now, we assign the link address only after we add the link to the driver, which is quite obviously wrong. It happens to work in many cases because it gets updated immediately, and then link_conf updates may update it, but it's clearly not really right. Set the link address during ieee80211_mgd_setup_link() so it's set before telling the driver about the link. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: move link code to a new fileJohannes Berg4-254/+274
We probably should've done that originally, we already have about 300 lines of code there, and will add more. Move all the link code we wrote to a new file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: remove unused arg to ieee80211_chandef_eht_operJohannes Berg3-6/+4
We don't need the sdata argument, and it doesn't make any sense for a direct conversion from one value to another, so just remove the argument Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: remove redundant err variableJinpeng Cui1-4/+1
Return value from rdev_set_mcast_rate() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: Support POWERED_ADDR_CHANGE featureJames Prestwood2-2/+71
Adds support in mac80211 for NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE. The motivation behind this functionality is to fix limitations of address randomization on frequencies which are disallowed in world roaming. The way things work now, if a client wants to randomize their address per-connection it must power down the device, change the MAC, and power back up. Here lies a problem since powering down the device may result in frequencies being disabled (until the regdom is set). If the desired BSS is on one such frequency the client is unable to connect once the phy is powered again. For mac80211 based devices changing the MAC while powered is possible but currently disallowed (-EBUSY). This patch adds some logic to allow a MAC change while powered by removing the interface, changing the MAC, and adding it again. mac80211 will advertise support for this feature so userspace can determine the best course of action e.g. disallow address randomization on certain frequencies if not supported. There are certain limitations put on this which simplify the logic: - No active connection - No offchannel work, including scanning. Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent 4-addr use on MLDsJohannes Berg2-0/+11
We haven't tried this yet, and it's not very likely to work well right now, so for now disable 4-addr use on interfaces that are MLDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161143.f2e4cc2efaa1.I5924e8fb44a2d098b676f5711b36bbc1b1bd68e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent VLANs on MLDsJohannes Berg1-0/+5
Do not allow VLANs to be added to AP interfaces that are MLDs, this isn't going to work because the link structs aren't propagated to the VLAN interfaces yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161144.8c88531146e9.If2ef9a3b138d4f16ed2fda91c852da156bdf5e4d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-29wifi: mac80211: fix potential deadlock in ieee80211_key_link()Sun Ke1-2/+4
Add the missing unlock before return in the error handling case. Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Signed-off-by: Sun Ke <sunke32@huawei.com> Link: https://lore.kernel.org/r/20220827022452.823381-1-sunke32@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26Merge tag 'wireless-next-2022-08-26-v2' of ↵David S. Miller24-289/+859
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes berg says: ==================== Various updates: * rtw88: operation, locking, warning, and code style fixes * rtw89: small updates * cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work * brcmfmac: a couple of fixes * misc cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26wifi: mac80211: use full 'unsigned int' typeXin Gao1-4/+4
The full 'unsigned int' is better than 'unsigned'. Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Link: https://lore.kernel.org/r/20220816181040.9044-1-gaoxin@cdjrlc.com [fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: read ethtool's sta_stats from sinfoRyder Lee1-5/+5
Driver may update sinfo directly through .sta_statistics, so this patch makes sure that ethool gets the correct statistics. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/f9edff14dd7f5205acf1c21bae8e9d8f9802dd88.1661466499.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: correct SMPS mode in HE 6 GHz capabilityJohannes Berg4-4/+7
If we add 6 GHz capability in MLO, we cannot use the SMPS mode from the deflink. Pass it separately instead since on a second link we don't even have a link data struct yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski43-162/+252
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25Merge tag 'net-6.0-rc3' of ↵Linus Torvalds42-161/+251
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ...
2022-08-25net: devlink: limit flash component name to match version returned by info_get()Jiri Pirko1-17/+88
Limit the acceptance of component name passed to cmd_flash_update() to match one of the versions returned by info_get(), marked by version type. This makes things clearer and enforces 1:1 mapping between exposed version and accepted flash component. Check VERSION_TYPE_COMPONENT version type during cmd_flash_update() execution by calling info_get() with different "req" context. That causes info_get() to lookup the component name instead of filling-up the netlink message. Remove "UPDATE_COMPONENT" flag which becomes used. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: devlink: extend info_get() version put to indicate a flash componentJiri Pirko1-4/+30
Whenever the driver is called by his info_get() op, it may put multiple version names and values to the netlink message. Extend by additional helper devlink_info_version_running/stored_put_ext() that allows to specify a version type that indicates when particular version name represents a flash component. This is going to be used in follow-up patch calling info_get() during flash update command checking if version with this the version type exists. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25rxrpc: Fix locking in rxrpc's sendmsgDavid Howells2-39/+57
Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com cc: Hawkins Jiawei <yin31149@gmail.com> cc: Khalid Masum <khalid.masum.92@gmail.com> cc: Dan Carpenter <dan.carpenter@oracle.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: sched: delete duplicate cleanup of backlog and qlenZhengchao Shao20-39/+0
qdisc_reset() is clearing qdisc->q.qlen and qdisc->qstats.backlog _after_ calling qdisc->ops->reset. There is no need to clear them again in the specific reset function. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220824005231.345727-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-25wifi: cfg80211: Add link_id to cfg80211_ch_switch_started_notify()Veerendranath Jakkam4-10/+23
Add link_id parameter to cfg80211_ch_switch_started_notify() to allow driver to indicate on which link channel switch started on MLD. Send the data to userspace so it knows as well. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220722131143.3438042-1-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220722131143.3438042-2-quic_vjakkam@quicinc.com [squash two patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: nl80211: send MLO links channel info in GET_INTERFACEVeerendranath Jakkam1-0/+7
Currently, MLO link level channel information not sent to userspace when NL80211_CMD_GET_INTERFACE requested on MLD. Add support to send channel information for all valid links for NL80211_CMD_GET_INTERFACE request. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220722131000.3437894-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: allow bw change during channel switch in meshHari Chandrakanthan1-3/+0
From 'IEEE Std 802.11-2020 section 11.8.8.4.1': The mesh channel switch may be triggered by the need to avoid interference to a detected radar signal, or to reassign mesh STA channels to ensure the MBSS connectivity. A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz MBSS may be changed to a 20/40 MHz MBSS. Since the standard allows the change of bandwidth during the channel switch in mesh, remove the bandwidth check present in ieee80211_set_csa_beacon. Fixes: c6da674aff94 ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh") Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com> Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: clean up a needless assignment in ieee80211_sta_activate_link()Lukas Bulwahn1-3/+1
Commit 177577dbd223 ("wifi: mac80211: sta_info: fix link_sta insertion") makes ieee80211_sta_activate_link() return 0 in the 'hash' label case. Hence, setting ret in the !test_sta_flag(...) branch to zero is not needed anymore and can be dropped. Remove a needless assignment. No functional change. No change in object code. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220812103126.25308-1-lukas.bulwahn@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: allow link address A2 in TXQ dequeueJohannes Berg1-2/+2
In ieee80211_tx_dequeue() we currently allow a control port frame to be transmitted on a non-authorized port only if the A2 matches the local interface address, but if that's an MLD and the peer is a legacy peer, we need to allow link address here. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: fix control port frame addressingJohannes Berg1-1/+2
For an AP interface, when userspace specifieds the link ID to transmit the control port frame on (in particular for the initial 4-way-HS), due to the logic in ieee80211_build_hdr() for a frame transmitted from/to an MLD, we currently build a header with A1 = DA = MLD address of the peer MLD A2 = local link address (!) A3 = SA = local MLD address This clearly makes no sense, and leads to two problems: - if the frame were encrypted (not true for the initial 4-way-HS) the AAD would be calculated incorrectly - if iTXQs are used, the frame is dropped by logic in ieee80211_tx_dequeue() Fix the addressing, which fixes the first bullet, and the second bullet for peer MLDs, I'll fix the second one for non-MLD peers separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: set link ID in TX info for beaconsJohannes Berg1-0/+2
This is simple here, and might save drivers some work if they have common code for TX between beacons and other frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: maintain link_id in link_staJohannes Berg1-0/+1
To helper drivers if they e.g. have a lookup of the link_sta pointer, add the link ID to the link_sta structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211/mac80211: check EHT capability size correctlyJohannes Berg6-25/+91
For AP/non-AP the EHT MCS/NSS subfield size differs, the 4-octet subfield is only used for 20 MHz-only non-AP STA. Pass an argument around everywhere to be able to parse it properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: mlme: don't add empty EML capabilitiesMordechay Goodstein1-3/+10
Draft P802.11be_D2.1, section 35.3.17 states that the EML Capabilities Field shouldn't be included in case the device doesn't have support for EMLSR or EMLMR. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: use link ID for MLO in queued framesJohannes Berg2-7/+27
When queuing frames to an interface store the link ID we determined (which possibly came from the driver in the RX status in the first place) in the RX status, and use it in the MLME code to send probe responses, beacons and CSA frames to the right link. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: use the corresponding link for stats updateVasanthakumar Thiagarajan1-6/+29
With link_id reported in rx_status for MLO connection, do the stats update on the appropriate link instead of always deflink. Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Link: https://lore.kernel.org/r/20220817104213.2531-3-quic_vthiagar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: add link information in ieee80211_rx_statusVasanthakumar Thiagarajan1-1/+94
In MLO, when the address translation from link to MLD is done in fw/hw, it is necessary to be able to have some information on the link on which the frame has been received. Extend the rx API to include link_id and a valid flag in ieee80211_rx_status. Also make chanes to mac80211 rx APIs to make use of the reported link_id after sanity checks. Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Link: https://lore.kernel.org/r/20220817104213.2531-2-quic_vthiagar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: properly implement MLO key handlingJohannes Berg7-104/+284
Implement key installation and lookup (on TX and RX) for MLO, so we can use multiple GTKs/IGTKs/BIGTKs. Co-authored-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam8-106/+200
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Prevent cfg80211_wext_siwencodeext() on MLDVeerendranath Jakkam1-0/+7
Currently, MLO support is not added for WEXT code and WEXT handlers are prevented on MLDs. Prevent WEXT handler cfg80211_wext_siwencodeext() also on MLD which is missed in commit 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-3-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: reject connect response with MLO params for WEPVeerendranath Jakkam1-0/+3
MLO connections are not supposed to use WEP security. Reject connect response of MLO connection if WEP security mode is used. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: fix use-after-freeJohannes Berg1-1/+1
We've already freed the assoc_data at this point, so need to use another copy of the AP (MLD) address instead. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: use link in TXQ parameter configurationShaul Triebitz1-1/+23
Configure the correct link per the passed parameters. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: add link id to txq paramsShaul Triebitz1-2/+15
The Tx queue parameters are per link, so add the link ID from nl80211 parameters to the API. While at it, lock the wdev when calling into the driver so it (and we) can check the link ID appropriately. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: set link BSSIDShaul Triebitz1-0/+2
For an AP interface, set the link BSSID when the link is initialized. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: get correct AP link chandefShaul Triebitz1-0/+4
When checking for channel regulatory validity, use the AP link chandef (and not mesh's chandef). Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Update RNR parsing to align with Draft P802.11be_D2.0Ilan Peer1-1/+1
Based on changes in the specification the TBTT information in the RNR can include MLD information, so update the parsing to allow extracting the short SSID information in such a case. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: properly set old_links when removing a linkShaul Triebitz1-2/+2
In ieee80211_sta_remove_link, valid_links is set to the new_links before calling drv_change_sta_links, but is used for the old_links. Fixes: cb71f1d136a6 ("wifi: mac80211: add sta link addition/removal") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: accept STA changes without link changesJohannes Berg1-0/+14
If there's no link ID, then check that there are no changes to the link, and if so accept them, unless a new link is created. While at it, reject creating a new link without an address. This fixes authorizing an MLD (peer) that has no link 0. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25net: gro: skb_gro_header helper functionRichard Gobert7-42/+21
Introduce a simple helper function to replace a common pattern. When accessing the GRO header, we fetch the pointer from frag0, then test its validity and fetch it from the skb when necessary. This leads to the pattern skb_gro_header_fast -> skb_gro_header_hard -> skb_gro_header_slow recurring many times throughout GRO code. This patch replaces these patterns with a single inlined function call, improving code readability. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220823071034.GA56142@debian Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-24net: Add a bhash2 table hashed by port and addressJoanne Koong9-92/+605
The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski13-52/+105
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix crash with malformed ebtables blob which do not provide all entry points, from Florian Westphal. 2) Fix possible TCP connection clogging up with default 5-days timeout in conntrack, from Florian. 3) Fix crash in nf_tables tproxy with unsupported chains, also from Florian. 4) Do not allow to update implicit chains. 5) Make table handle allocation per-netns to fix data race. 6) Do not truncated payload length and offset, and checksum offset. Instead report EINVAl. 7) Enable chain stats update via static key iff no error occurs. 8) Restrict osf expression to ip, ip6 and inet families. 9) Restrict tunnel expression to netdev family. 10) Fix crash when trying to bind again an already bound chain. 11) Flowtable garbage collector might leave behind pending work to delete entries. This patch comes with a previous preparation patch as dependency. 12) Allow net.netfilter.nf_conntrack_frag6_high_thresh to be lowered, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_defrag_ipv6: allow nf_conntrack_frag6_high_thresh increases netfilter: flowtable: fix stuck flows on cleanup due to pending work netfilter: flowtable: add function to invoke garbage collection immediately netfilter: nf_tables: disallow binding to already bound chain netfilter: nft_tunnel: restrict it to netdev family netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families netfilter: nf_tables: do not leave chain stats enabled on error netfilter: nft_payload: do not truncate csum_offset and csum_type netfilter: nft_payload: report ERANGE for too long offset and length netfilter: nf_tables: make table handle allocation per-netns friendly netfilter: nf_tables: disallow updates of implicit chain netfilter: nft_tproxy: restrict to prerouting hook netfilter: conntrack: work around exceeded receive window netfilter: ebtables: reject blobs that don't provide all entry points ==================== Link: https://lore.kernel.org/r/20220824220330.64283-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24net: Fix a data-race around sysctl_somaxconn.Kuniyuki Iwashima1-1/+1
While reading sysctl_somaxconn, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-22 20:32:21 +0000