summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2017-03-29tipc: add support for stream/seqpacket socketpairsErik Hugne1-2/+12
sockets A and B are connected back-to-back, similar to what AF_UNIX does. Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29net: mpls: Update lfib_nlmsg_size to skip deleted nexthopsDavid Ahern1-0/+2
A recent commit skips nexthops in a route if the device has been deleted. Update lfib_nlmsg_size accordingly. Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: dsa: dsa2: Add basic support of devlinkAndrew Lunn1-2/+45
Register the switch and its ports with devlink. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: break include loop netdevice.h, dsa.h, devlink.hAndrew Lunn11-2/+13
There is an include loop between netdevice.h, dsa.h, devlink.h because of NETDEV_ALIGN, making it impossible to use devlink structures in dsa.h. Break this loop by taking dsa.h out of netdevice.h, add a forward declaration of dsa_switch_tree and netdev_set_default_ethtool_ops() function, which is what netdevice.h requires. No longer having dsa.h in netdevice.h means the includes in dsa.h no longer get included. This breaks a few other files which depend on these includes. Add these directly in the affected file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: mpls: Send netconf messages on device register and unregisterDavid Ahern1-5/+11
Send netconf notifications for MPLS when the device registers and unregisters. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net:mpls: Refactor mpls_netconf_notify_devconf to take eventDavid Ahern1-7/+5
Refactor mpls_netconf_notify_devconf to take the event as an input arg. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: ipv6: Add support for RTM_DELNETCONFDavid Ahern1-5/+15
Send RTM_DELNETCONF notifications when a device is deleted. The message only needs the device index, so modify inet6_netconf_fill_devconf to skip devconf references if it is NULL. Allows a userspace cache to remove entries as devices are deleted. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: ipv6: Refactor inet6_netconf_notify_devconf to take eventDavid Ahern2-15/+27
Refactor inet6_netconf_notify_devconf to take the event as an input arg. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: devinet: Add support for RTM_DELNETCONFDavid Ahern1-11/+21
Send RTM_DELNETCONF notifications when a device is deleted. The message only needs the device index, so modify inet_netconf_fill_devconf to skip devconf references if it is NULL. Allows a userspace cache to remove entries as devices are deleted. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: devinet: Refactor inet_netconf_notify_devconf to take eventDavid Ahern2-17/+27
Refactor inet_netconf_notify_devconf to take the event as an input arg. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: dsa: fix copyright holderVivien Didelot1-1/+2
I do not hold the copyright of the DSA core and drivers source files, since these changes have been written as an initiative of my day job. Fix this. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28ipv6: add support for NETDEV_RESEND_IGMP eventVlad Yasevich2-2/+55
This patch adds support for NETDEV_RESEND_IGMP event similar to how it works for IPv4. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28tipc: adjust the policy of holding subscription krefYing Xue3-6/+7
When a new subscription object is inserted into name_seq->subscriptions list, it's under name_seq->lock protection; when a subscription is deleted from the list, it's also under the same lock protection; similarly, when accessing a subscription by going through subscriptions list, the entire process is also protected by the name_seq->lock. Therefore, if subscription refcount is increased before it's inserted into subscriptions list, and its refcount is decreased after it's deleted from the list, it will be unnecessary to hold refcount at all before accessing subscription object which is obtained by going through subscriptions list under name_seq->lock protection. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28tipc: advance the time of deleting subscription from subscriber->subscrp_listYing Xue1-7/+2
After a subscription object is created, it's inserted into its subscriber subscrp_list list under subscriber lock protection, similarly, before it's destroyed, it should be first removed from its subscriber->subscrp_list. Since the subscription list is accessed with subscriber lock, all the subscriptions are valid during the lock duration. Hence in tipc_subscrb_subscrp_delete(), we remove subscription get/put and the extra subscriber unlock/lock. After this change, the subscriptions refcount cleanup is very simple and does not access any lock. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28soc: qcom: smd: Transition client drivers from smd to rpmsgBjorn Andersson2-23/+21
By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross <andy.gross@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28devlink: Support for pipeline debug (dpipe)Arkadi Sharshevsky1-0/+836
The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-27ipv6: sr: select DST_CACHE by defaultDavid Lebrun2-18/+1
When CONFIG_IPV6_SEG6_LWTUNNEL is selected, automatically select DST_CACHE. This allows to remove multiple ifdefs. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-27net: mpls: Delete route when all nexthops have been deletedDavid Ahern1-1/+8
When all devices for all nexthops in a route have been deleted, the route is effectively dead, so remove it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-27net: mpls: Don't show nexthop if device has been deletedDavid Ahern1-3/+5
If the device for a nexthop in a multipath route is deleted, the nexthop is effectively removed from the route. Currently, a route dump still returns the nexhop though without the device set: $ ip -f mpls ro ls 100 nexthopvia inet 10.11.1.2 dev br0 nexthopvia inet 10.100.3.1 dev eth3 $ ip li del br0 $ ip -f mpls ro ls 100 nexthopvia inet 10.11.1.2 dev * dead linkdown nexthopvia inet 10.100.3.1 dev eth3 Since the nexthop is effectively deleted, drop the hop from the route dump. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Introduce SO_INCOMING_NAPI_IDSridhar Samudrala1-0/+12
This socket option returns the NAPI ID associated with the queue on which the last frame is received. This information can be used by the apps to split the incoming flows among the threads based on the Rx queue on which they are received. If the NAPI ID actually represents a sender_cpu then the value is ignored and 0 is returned. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Commonize busy polling code to focus on napi_id instead of socketSridhar Samudrala2-13/+19
Move the core functionality in sk_busy_loop() to napi_busy_loop() and make it independent of sk. This enables re-using this function in epoll busy loop implementation. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Track start of busy loop instead of when it should endAlexander Duyck1-3/+3
This patch flips the logic we were using to determine if the busy polling has timed out. The main motivation for this is that we will need to support two different possible timeout values in the future and by recording the start time rather than when we would want to end we can focus on making the end_time specific to the task be it epoll or socket based polling. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Change return type of sk_busy_loop from bool to voidAlexander Duyck3-19/+23
checking the return value of sk_busy_loop. As there are only a few consumers of that data, and the data being checked for can be replaced with a check for !skb_queue_empty() we might as well just pull the code out of sk_busy_loop and place it in the spots that actually need it. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24tcp: Record Rx hash and NAPI ID in tcp_child_processAlexander Duyck3-4/+4
While working on some recent busy poll changes we found that child sockets were being instantiated without NAPI ID being set. In our first attempt to fix it, it was suggested that we should just pull programming the NAPI ID into the function itself since all callers will need to have it set. In addition to the NAPI ID change I have dropped the code that was populating the Rx hash since it was actually being populated in tcp_get_cookie_sock. Reported-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Busy polling should ignore sender CPUsAlexander Duyck1-4/+9
This patch is a cleanup/fix for NAPI IDs following the changes that made it so that sender_cpu and napi_id were doing a better job of sharing the same location in the sk_buff. One issue I found is that we weren't validating the napi_id as being valid before we started trying to setup the busy polling. This change corrects that by using the MIN_NAPI_ID value that is now used in both allocating the NAPI IDs, as well as validating them. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24ipv6: sr: use dst_cache in seg6_inputDavid Lebrun1-1/+26
We already use dst_cache in seg6_output, when handling locally generated packets. We extend it in seg6_input, to also handle forwarded packets, and avoid unnecessary fib lookups. Performances for SRH encapsulation before the patch: Result: OK: 5656067(c5655678+d388) usec, 5000000 (1000byte,0frags) 884006pps 7072Mb/sec (7072048000bps) errors: 0 Performances after the patch: Result: OK: 4774543(c4774084+d459) usec, 5000000 (1000byte,0frags) 1047220pps 8377Mb/sec (8377760000bps) errors: 0 Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24ipv6: sr: expand skb head only if necessaryDavid Lebrun1-2/+2
To insert or encapsulate a packet with an SRH, we need a large enough skb headroom. Currently, we are using pskb_expand_head to inconditionally increase the size of the headroom by the amount needed by the SRH (and IPv6 header). If this reallocation is performed by another CPU than the one that initially allocated the skb, then when the initial CPU kfree the skb, it will enter the __slab_free slowpath, impacting performances. This patch replaces pskb_expand_head with skb_cow_head, that will reallocate the skb head only if the headroom is not large enough. Performances for SRH encapsulation before the patch: Result: OK: 7348320(c7347271+d1048) usec, 5000000 (1000byte,0frags) 680427pps 5443Mb/sec (5443416000bps) errors: 0 Performances after the patch: Result: OK: 5656067(c5655678+d388) usec, 5000000 (1000byte,0frags) 884006pps 7072Mb/sec (7072048000bps) errors: 0 Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net_sched: use setup_deferrable_timerGeliang Tang2-6/+4
Use setup_deferrable_timer() instead of init_timer_deferrable() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: mpls: Fix setting ttl_propagate for rt2David Ahern1-1/+1
Fix copy and paste error setting rt_ttl_propagate. Fixes: 5b441ac8784c1 ("mpls: allow TTL propagation to IP packets to be configured") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: make in_aton() 32-bit internallyAlexey Dobriyan1-1/+1
Converting IPv4 address doesn't need 64-bit arithmetic. Space savings: 10 bytes! add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10 (-10) function old new delta in_aton 96 86 -10 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Add sysctl to toggle early demux for tcp and udpsubashab@codeaurora.org8-10/+86
Certain system process significant unconnected UDP workload. It would be preferrable to disable UDP early demux for those systems and enable it for TCP only. By disabling UDP demux, we see these slight gains on an ARM64 system- 782 -> 788Mbps unconnected single stream UDPv4 633 -> 654Mbps unconnected UDPv4 different sources The performance impact can change based on CPU architecure and cache sizes. There will not much difference seen if entire UDP hash table is in cache. Both sysctls are enabled by default to preserve existing behavior. v1->v2: Change function pointer instead of adding conditional as suggested by Stephen. v2->v3: Read once in callers to avoid issues due to compiler optimizations. Also update commit message with the tests. v3->v4: Store and use read once result instead of querying pointer again incorrectly. v4->v5: Refactor to avoid errors due to compilation with IPV6={m,n} Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Suggested-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Tom Herbert <tom@herbertland.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: sched: choke: remove dead filter classify codeJiri Pirko1-51/+0
sch_choke is classless qdisc so it does not define cl_ops. Therefore filter_list cannot be ever changed, being NULL all the time. Reason is this check in tc_ctl_tfilter: /* Is it classful? */ cops = q->ops->cl_ops; if (!cops) return -EINVAL; So remove this dead code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: bridge: allow to add externally learned entries from user-spaceNikolay Aleksandrov1-0/+2
The NTF_EXT_LEARNED flag was added for switchdev and externally learned entries, but it can also be used for entries learned via a software in user-space which requires dynamic entries that do not expire. One such case that we have is with quagga and evpn which need dynamic entries but also require to age them themselves. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: bridge: allow SW learn to take over HW fdb entriesNikolay Aleksandrov1-0/+3
Allow to take over an entry which was previously learned via HW when it shows up from a SW port. This is analogous to how HW takes over SW learned entries already. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23sched: act_csum: don't mangle TCP and UDP GSO packetsDavide Caratti1-0/+12
after act_csum computes the checksum on skbs carrying GSO TCP/UDP packets, subsequent segmentation fails because skb_needs_check(skb, true) returns true. Because of that, skb_warn_bad_offload() is invoked and the following message is displayed: WARNING: CPU: 3 PID: 28 at net/core/dev.c:2553 skb_warn_bad_offload+0xf0/0xfd <...> [<ffffffff8171f486>] skb_warn_bad_offload+0xf0/0xfd [<ffffffff8161304c>] __skb_gso_segment+0xec/0x110 [<ffffffff8161340d>] validate_xmit_skb+0x12d/0x2b0 [<ffffffff816135d2>] validate_xmit_skb_list+0x42/0x70 [<ffffffff8163c560>] sch_direct_xmit+0xd0/0x1b0 [<ffffffff8163c760>] __qdisc_run+0x120/0x270 [<ffffffff81613b3d>] __dev_queue_xmit+0x23d/0x690 [<ffffffff81613fa0>] dev_queue_xmit+0x10/0x20 Since GSO is able to compute checksum on individual segments of such skbs, we can simply skip mangling the packet. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23Add a eBPF helper function to retrieve socket uidChenbo Feng1-0/+22
Returns the owner uid of the socket inside a sk_buff. This is useful to perform per-UID accounting of network traffic or per-UID packet filtering. The socket need to be a fullsock otherwise overflowuid is returned. Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23Add a helper function to get socket cookie in eBPFChenbo Feng2-1/+18
Retrieve the socket cookie generated by sock_gen_cookie() from a sk_buff with a known socket. Generates a new cookie if one was not yet set.If the socket pointer inside sk_buff is NULL, 0 is returned. The helper function coud be useful in monitoring per socket networking traffic statistics and provide a unique socket identifier per namespace. Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller49-313/+504
Conflicts: drivers/net/ethernet/broadcom/genet/bcmmii.c drivers/net/hyperv/netvsc.c kernel/bpf/hashtab.c Almost entirely overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds48-312/+502
Pull networking fixes from David Miller: 1) Several netfilter fixes from Pablo and the crew: - Handle fragmented packets properly in netfilter conntrack, from Florian Westphal. - Fix SCTP ICMP packet handling, from Ying Xue. - Fix big-endian bug in nftables, from Liping Zhang. - Fix alignment of fake conntrack entry, from Steven Rostedt. 2) Fix feature flags setting in fjes driver, from Taku Izumi. 3) Openvswitch ipv6 tunnel source address not set properly, from Or Gerlitz. 4) Fix jumbo MTU handling in amd-xgbe driver, from Thomas Lendacky. 5) sk->sk_frag.page not released properly in some cases, from Eric Dumazet. 6) Fix RTNL deadlocks in nl80211, from Johannes Berg. 7) Fix erroneous RTNL lockdep splat in crypto, from Herbert Xu. 8) Cure improper inflight handling during AF_UNIX GC, from Andrey Ulanov. 9) sch_dsmark doesn't write to packet headers properly, from Eric Dumazet. 10) Fix SCM_TIMESTAMPING_OPT_STATS handling in TCP, from Soheil Hassas Yeganeh. 11) Add some IDs for Motorola qmi_wwan chips, from Tony Lindgren. 12) Fix nametbl deadlock in tipc, from Ying Xue. 13) GRO and LRO packets not counted correctly in mlx5 driver, from Gal Pressman. 14) Fix reset of internal PHYs in bcmgenet, from Doug Berger. 15) Fix hashmap allocation handling, from Alexei Starovoitov. 16) nl_fib_input() needs stronger netlink message length checking, from Eric Dumazet. 17) Fix double-free of sk->sk_filter during sock clone, from Daniel Borkmann. 18) Fix RX checksum offloading in aquantia driver, from Pavel Belous. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) net:ethernet:aquantia: Fix for RX checksum offload. amd-xgbe: Fix the ECC-related bit position definitions sfc: cleanup a condition in efx_udp_tunnel_del() Bluetooth: btqcomsmd: fix compile-test dependency inet: frag: release spinlock before calling icmp_send() tcp: initialize icsk_ack.lrcvtime at session start time genetlink: fix counting regression on ctrl_dumpfamily() socket, bpf: fix sk_filter use after free in sk_clone_lock ipv4: provide stronger user input validation in nl_fib_input() bpf: fix hashmap extra_elems logic enic: update enic maintainers net: bcmgenet: remove bcmgenet_internal_phy_setup() ipv6: make sure to initialize sockc.tsflags before first use fjes: Do not load fjes driver if extended socket device is not power on. fjes: Do not load fjes driver if system does not have extended socket device. net/mlx5e: Count LRO packets correctly net/mlx5e: Count GSO packets correctly net/mlx5: Increase number of max QPs in default profile net/mlx5e: Avoid supporting udp tunnel port ndo for VF reps net/mlx5e: Use the proper UAPI values when offloading TC vlan actions ...
2017-03-22inet: frag: release spinlock before calling icmp_send()Eric Dumazet1-8/+17
Dmitry reported a lockdep splat [1] (false positive) that we can fix by releasing the spinlock before calling icmp_send() from ip_expire() This is a false positive because sending an ICMP message can not possibly re-enter the IP frag engine. [1] [ INFO: possible circular locking dependency detected ] 4.10.0+ #29 Not tainted ------------------------------------------------------- modprobe/12392 is trying to acquire lock: (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock include/linux/spinlock.h:299 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock include/linux/netdevice.h:3486 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 but task is already holding lock: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&q->lock)->rlock){+.-...}: validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669 ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713 packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459 deliver_skb net/core/dev.c:1834 [inline] dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890 xmit_one net/core/dev.c:2903 [inline] dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923 sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308 neigh_output include/net/neighbour.h:478 [inline] ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228 ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672 ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545 ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985 __sys_sendmmsg+0x25c/0x750 net/socket.c:2075 SYSC_sendmmsg net/socket.c:2106 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2101 do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281 return_from_SYSCALL_64+0x0/0x7a -> #0 (_xmit_ETHER#2){+.-...}: check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 __read_once_size include/linux/compiler.h:254 [inline] atomic_read arch/x86/include/asm/atomic.h:26 [inline] rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] __rcu_is_watching kernel/rcu/tree.c:1133 [inline] rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); *** DEADLOCK *** 10 locks held by modprobe/12392: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>] __do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336 #1: (rcu_read_lock){......}, at: [<ffffffff8188cab6>] filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324 #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] spin_lock include/linux/spinlock.h:299 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] pte_alloc_one_map mm/memory.c:2944 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072 #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] lockdep_copy_map include/linux/lockdep.h:175 [inline] #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258 #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 #5: (rcu_read_lock){......}, at: [<ffffffff8389a633>] ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216 #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock include/linux/spinlock.h:309 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock net/ipv4/icmp.c:219 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681 #7: (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>] ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198 #8: (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>] __dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324 #9: (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at: [<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 stack backtrace: CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204 check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline] RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000 R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25 R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000 </IRQ> rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 RIP: 0033:0x7f83172f2786 RSP: 002b:00007fffe859ae80 EFLAGS: 00010293 RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970 RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000 R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040 R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22tcp: initialize icsk_ack.lrcvtime at session start timeEric Dumazet2-1/+2
icsk_ack.lrcvtime has a 0 value at socket creation time. tcpi_last_data_recv can have bogus value if no payload is ever received. This patch initializes icsk_ack.lrcvtime for active sessions in tcp_finish_connect(), and for passive sessions in tcp_create_openreq_child() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22genetlink: fix counting regression on ctrl_dumpfamily()Stanislaw Gruszka1-1/+3
Commit 2ae0f17df1cd ("genetlink: use idr to track families") replaced if (++n < fams_to_skip) continue; into: if (n++ < fams_to_skip) continue; This subtle change cause that on retry ctrl_dumpfamily() call we omit one family that failed to do ctrl_fill_info() on previous call, because cb->args[0] = n number counts also family that failed to do ctrl_fill_info(). Patch fixes the problem and avoid confusion in the future just decrease n counter when ctrl_fill_info() fail. User visible problem caused by this bug is failure to get access to some genetlink family i.e. nl80211. However problem is reproducible only if number of registered genetlink families is big enough to cause second call of ctrl_dumpfamily(). Cc: Xose Vazquez Perez <xose.vazquez@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Johannes Berg <johannes@sipsolutions.net> Fixes: 2ae0f17df1cd ("genetlink: use idr to track families") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22socket, bpf: fix sk_filter use after free in sk_clone_lockDaniel Borkmann1-0/+6
In sk_clone_lock(), we create a new socket and inherit most of the parent's members via sock_copy() which memcpy()'s various sections. Now, in case the parent socket had a BPF socket filter attached, then newsk->sk_filter points to the same instance as the original sk->sk_filter. sk_filter_charge() is then called on the newsk->sk_filter to take a reference and should that fail due to hitting max optmem, we bail out and release the newsk instance. The issue is that commit 278571baca2a ("net: filter: simplify socket charging") wrongly combined the dismantle path with the failure path of xfrm_sk_clone_policy(). This means, even when charging failed, we call sk_free_unlock_clone() on the newsk, which then still points to the same sk_filter as the original sk. Thus, sk_free_unlock_clone() calls into __sk_destruct() eventually where it tests for present sk_filter and calls sk_filter_uncharge() on it, which potentially lets sk_omem_alloc wrap around and releases the eBPF prog and sk_filter structure from the (still intact) parent. Fix it by making sure that when sk_filter_charge() failed, we reset newsk->sk_filter back to NULL before passing to sk_free_unlock_clone(), so that we don't mess with the parents sk_filter. Only if xfrm_sk_clone_policy() fails, we did reach the point where either the parent's filter was NULL and as a result newsk's as well or where we previously had a successful sk_filter_charge(), thus for that case, we do need sk_filter_uncharge() to release the prior taken reference on sk_filter. Fixes: 278571baca2a ("net: filter: simplify socket charging") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.Joel Scherpelz2-0/+12
This commit adds a new sysctl accept_ra_rt_info_min_plen that defines the minimum acceptable prefix length of Route Information Options. The new sysctl is intended to be used together with accept_ra_rt_info_max_plen to configure a range of acceptable prefix lengths. It is useful to prevent misconfigurations from unintentionally blackholing too much of the IPv6 address space (e.g., home routers announcing RIOs for fc00::/7, which is incorrect). Signed-off-by: Joel Scherpelz <jscherpelz@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22ipv4: provide stronger user input validation in nl_fib_input()Eric Dumazet1-1/+2
Alexander reported a KMSAN splat caused by reads of uninitialized field (tb_id_in) from user provided struct fib_result_nl It turns out nl_fib_input() sanity tests on user input is a bit wrong : User can pretend nlh->nlmsg_len is big enough, but provide at sendmsg() time a too small buffer. Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22rtnetlink: Add dump all for netconfDavid Ahern1-0/+1
Use the rtnl_dump_all to dump all netconf handlers that have been registered. Allows userspace to send a dump request for PF_UNSPEC and get all families. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22ipv6: make sure to initialize sockc.tsflags before first useAlexander Potapenko1-1/+1
In the case udp_sk(sk)->pending is AF_INET6, udpv6_sendmsg() would jump to do_append_data, skipping the initialization of sockc.tsflags. Fix the problem by moving sockc.tsflags initialization earlier. The bug was detected with KMSAN. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: convert sk_filter.refcnt from atomic_t to refcount_tReshetova, Elena1-5/+12
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22tipc: fix nametbl deadlock at tipc_nametbl_unsubscribeYing Xue1-1/+6
Until now, tipc_nametbl_unsubscribe() is called at subscriptions reference count cleanup. Usually the subscriptions cleanup is called at subscription timeout or at subscription cancel or at subscriber delete. We have ignored the possibility of this being called from other locations, which causes deadlock as we try to grab the tn->nametbl_lock while holding it already. CPU1: CPU2: ---------- ---------------- tipc_nametbl_publish spin_lock_bh(&tn->nametbl_lock) tipc_nametbl_insert_publ tipc_nameseq_insert_publ tipc_subscrp_report_overlap tipc_subscrp_get tipc_subscrp_send_event tipc_close_conn tipc_subscrb_release_cb tipc_subscrb_delete tipc_subscrp_put tipc_subscrp_put tipc_subscrp_kref_release tipc_nametbl_unsubscribe spin_lock_bh(&tn->nametbl_lock) <<grab nametbl_lock again>> CPU1: CPU2: ---------- ---------------- tipc_nametbl_stop spin_lock_bh(&tn->nametbl_lock) tipc_purge_publications tipc_nameseq_remove_publ tipc_subscrp_report_overlap tipc_subscrp_get tipc_subscrp_send_event tipc_close_conn tipc_subscrb_release_cb tipc_subscrb_delete tipc_subscrp_put tipc_subscrp_put tipc_subscrp_kref_release tipc_nametbl_unsubscribe spin_lock_bh(&tn->nametbl_lock) <<grab nametbl_lock again>> In this commit, we advance the calling of tipc_nametbl_unsubscribe() from the refcount cleanup to the intended callers. Fixes: d094c4d5f5c7 ("tipc: add subscription refcount to avoid invalid delete") Reported-by: John Thompson <thompa.atl@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: tcp: Permit user set TCP_MAXSEG to default valueGao Feng1-1/+1
When user_mss is zero, it means use the default value. But the current codes don't permit user set TCP_MAXSEG to the default value. It would return the -EINVAL when val is zero. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>