summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2021-07-30Merge tag 'net-5.14-rc4' of ↵Linus Torvalds29-134/+247
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi (mac80211) and netfilter trees. Current release - regressions: - mac80211: fix starting aggregation sessions on mesh interfaces Current release - new code bugs: - sctp: send pmtu probe only if packet loss in Search Complete state - bnxt_en: add missing periodic PHC overflow check - devlink: fix phys_port_name of virtual port and merge error - hns3: change the method of obtaining default ptp cycle - can: mcba_usb_start(): add missing urb->transfer_dma initialization Previous releases - regressions: - set true network header for ECN decapsulation - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY - sctp: fix return value check in __sctp_rcv_asconf_lookup Previous releases - always broken: - bpf: - more spectre corner case fixes, introduce a BPF nospec instruction for mitigating Spectre v4 - fix OOB read when printing XDP link fdinfo - sockmap: fix cleanup related races - mac80211: fix enabling 4-address mode on a sta vif after assoc - can: - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF - j1939: j1939_session_deactivate(): clarify lifetime of session object, avoid UAF - fix number of identical memory leaks in USB drivers - tipc: - do not blindly write skb_shinfo frags when doing decryption - fix sleeping in tipc accept routine" * tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) gve: Update MAINTAINERS list can: esd_usb2: fix memory leak can: ems_usb: fix memory leak can: usb_8dev: fix memory leak can: mcba_usb_start(): add missing urb->transfer_dma initialization can: hi311x: fix a signedness bug in hi3110_cmd() MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver bpf: Fix leakage due to insufficient speculative store bypass mitigation bpf: Introduce BPF nospec instruction for mitigating Spectre v4 sis900: Fix missing pci_disable_device() in probe and remove net: let flow have same hash in two directions nfc: nfcsim: fix use after free during module unload tulip: windbond-840: Fix missing pci_disable_device() in probe and remove sctp: fix return value check in __sctp_rcv_asconf_lookup nfc: s3fwrn5: fix undefined parameter values in dev_err() net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32 net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev() net/mlx5: Unload device upon firmware fatal error net/mlx5e: Fix page allocation failure for ptp-RQ over SF net/mlx5e: Fix page allocation failure for trap-RQ over SF ...
2021-07-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-11/+28
Daniel Borkmann says: ==================== pull-request: bpf 2021-07-29 The following pull-request contains BPF updates for your *net* tree. We've added 9 non-merge commits during the last 14 day(s) which contain a total of 20 files changed, 446 insertions(+), 138 deletions(-). The main changes are: 1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer. 2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann, Piotr Krysiuk and Benedict Schlueter. 3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28af_unix: fix garbage collect vs MSG_PEEKMiklos Szeredi1-2/+49
unix_gc() assumes that candidate sockets can never gain an external reference (i.e. be installed into an fd) while the unix_gc_lock is held. Except for MSG_PEEK this is guaranteed by modifying inflight count under the unix_gc_lock. MSG_PEEK does not touch any variable protected by unix_gc_lock (file count is not), yet it needs to be serialized with garbage collection. Do this by locking/unlocking unix_gc_lock: 1) increment file count 2) lock/unlock barrier to make sure incremented file count is visible to garbage collection 3) install file into fd This is a lock barrier (unlike smp_mb()) that ensures that garbage collection is run completely before or completely after the barrier. Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-28net: let flow have same hash in two directionszhang kai1-9/+9
using same source and destination ip/port for flow hash calculation within the two directions. Signed-off-by: zhang kai <zhangkaiheb@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28sctp: fix return value check in __sctp_rcv_asconf_lookupMarcelo Ricardo Leitner1-1/+1
As Ben Hutchings noticed, this check should have been inverted: the call returns true in case of success. Reported-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 0c5dc070ff3d ("sctp: validate from_addr_param return") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27bpf, sockmap: Fix memleak on ingress msg enqueueJohn Fastabend1-6/+0
If backlog handler is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it. sk_psock_backlog() sk_psock_handle_skb() skb_psock_skb_ingress() sk_psock_skb_ingress_enqueue() sk_psock_queue_msg(psock,msg) spin_lock(ingress_lock) sk_psock_zap_ingress() _sk_psock_purge_ingerss_msg() _sk_psock_purge_ingress_msg() -- free ingress_msg list -- spin_unlock(ingress_lock) spin_lock(ingress_lock) list_add_tail(msg,ingress_msg) <- entry on list with no one left to free it. spin_unlock(ingress_lock) To fix we only enqueue from backlog if the ENABLED bit is set. The tear down logic clears the bit with ingress_lock set so we wont enqueue the msg in the last step. Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210727160500.1713554-4-john.fastabend@gmail.com
2021-07-27bpf, sockmap: On cleanup we additionally need to remove cached skbJohn Fastabend1-6/+29
Its possible if a socket is closed and the receive thread is under memory pressure it may have cached a skb. We need to ensure these skbs are free'd along with the normal ingress_skb queue. Before 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear down and backlog processing both had sock_lock for the common case of socket close or unhash. So it was not possible to have both running in parrallel so all we would need is the kfree in those kernels. But, latest kernels include the commit 799aa7f98d5e and this requires a bit more work. Without the ingress_lock guarding reading/writing the state->skb case its possible the tear down could run before the state update causing it to leak memory or worse when the backlog reads the state it could potentially run interleaved with the tear down and we might end up free'ing the state->skb from tear down side but already have the reference from backlog side. To resolve such races we wrap accesses in ingress_lock on both sides serializing tear down and backlog case. In both cases this only happens after an EAGAIN error case so having an extra lock in place is likely fine. The normal path will skip the locks. Note, we check state->skb before grabbing lock. This works because we can only enqueue with the mutex we hold already. Avoiding a race on adding state->skb after the check. And if tear down path is running that is also fine if the tear down path then removes state->skb we will simply set skb=NULL and the subsequent goto is skipped. This slight complication avoids locking in normal case. With this fix we no longer see this warning splat from tcp side on socket close when we hit the above case with redirect to ingress self. [224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220 [224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi [224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G I 5.14.0-rc1alu+ #181 [224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019 [224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220 [224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41 [224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206 [224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000 [224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460 [224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543 [224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390 [224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500 [224913.935974] FS: 00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000 [224913.935981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0 [224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [224913.936007] Call Trace: [224913.936016] inet_csk_destroy_sock+0xba/0x1f0 [224913.936033] __tcp_close+0x620/0x790 [224913.936047] tcp_close+0x20/0x80 [224913.936056] inet_release+0x8f/0xf0 [224913.936070] __sock_release+0x72/0x120 [224913.936083] sock_close+0x14/0x20 Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210727160500.1713554-3-john.fastabend@gmail.com
2021-07-27bpf, sockmap: Zap ingress queues after stopping strparserJohn Fastabend1-2/+2
We don't want strparser to run and pass skbs into skmsg handlers when the psock is null. We just sk_drop them in this case. When removing a live socket from map it means extra drops that we do not need to incur. Move the zap below strparser close to avoid this condition. This way we stop the stream parser first stopping it from processing packets and then delete the psock. Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210727160500.1713554-2-john.fastabend@gmail.com
2021-07-27net: llc: fix skb_over_panicPavel Skripkin2-2/+10
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The problem was in wrong LCC header manipulations. Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is doing following steps: 1. skb allocation with size = len + header size len is passed from userpace and header size is 3 since addr->sllc_xid is set. 2. skb_reserve() for header_len = 3 3. filling all other space with memcpy_from_msg() Ok, at this moment we have fully loaded skb, only headers needs to be filled. Then code comes to llc_sap_action_send_xid_c(). This function pushes 3 bytes for LLC PDU header and initializes it. Then comes llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU header and call skb_push(skb, 3). This looks wrong for 2 reasons: 1. Bytes rigth after LLC header are user data, so this function was overwriting payload. 2. skb_push(skb, 3) call can cause skb_over_panic() since all free space was filled in llc_ui_sendmsg(). (This can happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC header) = 703. SKB_DATA_ALIGN(703) = 704) So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by llc_pdu_header_init() function to push 6 bytes instead of 3. And finally I removed skb_push() call from llc_pdu_init_as_xid_cmd(). This changes should not affect other parts of LLC, since after all steps we just transmit buffer. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-26sctp: delete addr based on sin6_scope_idChen Shen1-2/+3
sctp_inet6addr_event deletes 'addr' from 'local_addr_list' when setting netdev down, but it is possible to delete the incorrect entry (match the first one with the same ipaddr, but the different 'ifindex'), if there are some netdevs with the same 'local-link' ipaddr added already. It should delete the entry depending on 'sin6_addr' and 'sin6_scope_id' both. otherwise, the endpoint will call 'sctp_sf_ootb' if it can't find the according association when receives 'heartbeat', and finally will reply 'abort'. For example: 1.when linux startup the entries in local_addr_list: ifindex:35 addr:fe80::40:43ff:fe80:0 (eths0.201) ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209) ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210) the route table: local fe80::40:43ff:fe80:0 dev eths0.201 local fe80::40:43ff:fe80:0 dev eths0.209 local fe80::40:43ff:fe80:0 dev eths0.210 2.after 'ifconfig eths0.209 down' the entries in local_addr_list: ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209) ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210) the route table: local fe80::40:43ff:fe80:0 dev eths0.201 local fe80::40:43ff:fe80:0 dev eths0.210 3.asoc not found for src:[fe80::40:43ff:fe80:0]:37381 dst:[:1]:53335 ::1->fe80::40:43ff:fe80:0 HEARTBEAT fe80::40:43ff:fe80:0->::1 ABORT Signed-off-by: Chen Shen <peterchenshen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25sctp: send pmtu probe only if packet loss in Search Complete stateXin Long1-1/+5
This patch is to introduce last_rtx_chunks into sctp_transport to detect if there's any packet retransmission/loss happened by checking against asoc's rtx_data_chunks in sctp_transport_pl_send(). If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks, the pmtu probe will be sent out. Otherwise, increment the pl.raise_count and return when it's in Search Complete state. With this patch, if in Search Complete state, which is a long period, it doesn't need to keep probing the current pmtu unless there's data packet loss. This will save quite some traffic. v1->v2: - add the missing Fixes tag. Fixes: 0dac127c0557 ("sctp: do black hole detection in search complete state") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25sctp: improve the code for pmtu probe send and recv updateXin Long2-26/+30
This patch does 3 things: - make sctp_transport_pl_send() and sctp_transport_pl_recv() return bool type to decide if more probe is needed to send. - pr_debug() only when probe is really needed to send. - count pl.raise_count in sctp_transport_pl_send() instead of sctp_transport_pl_recv(), and it's only incremented for the 1st probe for the same size. These are preparations for the next patch to make probes happen only when there's packet loss in Search Complete state. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25devlink: Fix phys_port_name of virtual port and merge errorParav Pandit1-8/+2
Merge commit cited in fixes tag was incorrect. Due to it phys_port_name of the virtual port resulted in incorrect name. Also the phys_port_name of the physical port was written twice due to the merge error. Fix it by removing the old code and inserting back the misplaced code. Related commits of interest in net and net-next branches that resulted in merge conflict are: in net-next branch: commit f285f37cb1e6 ("devlink: append split port number to the port name") in net branch: commit b28d8f0c25a9 ("devlink: Correct VIRTUAL port to not have phys_port attributes") Fixes: 126285651b7 ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Parav Pandit <parav@nvidia.com> Reported-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-24tipc: do not write skb_shinfo frags when doing decrytionXin Long1-10/+4
One skb's skb_shinfo frags are not writable, and they can be shared with other skbs' like by pskb_copy(). To write the frags may cause other skb's data crash. So before doing en/decryption, skb_cow_data() should always be called for a cloned or nonlinear skb if req dst is using the same sg as req src. While at it, the likely branch can be removed, as it will be covered by skb_cow_data(). Note that esp_input() has the same issue, and I will fix it in another patch. tipc_aead_encrypt() doesn't have this issue, as it only processes linear data in the unlikely branch. Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-24can: j1939: j1939_xtp_rx_dat_one(): fix rxtimer value between consecutive ↵Zhang Changzhong1-1/+1
TP.DT to 750ms For receive side, the max time interval between two consecutive TP.DT should be 750ms. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/1625569210-47506-1-git-send-email-zhangchangzhong@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: j1939: j1939_session_deactivate(): clarify lifetime of session objectOleksij Rempel1-2/+7
The j1939_session_deactivate() is decrementing the session ref-count and potentially can free() the session. This would cause use-after-free situation. However, the code calling j1939_session_deactivate() does always hold another reference to the session, so that it would not be free()ed in this code path. This patch adds a comment to make this clear and a WARN_ON, to ensure that future changes will not violate this requirement. Further this patch avoids dereferencing the session pointer as a precaution to avoid use-after-free if the session is actually free()ed. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210714111602.24021-1-o.rempel@pengutronix.de Reported-by: Xiaochen Zou <xzou017@ucr.edu> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAFZiyang Xuan1-2/+18
We get a bug during ltp can_filter test as following. =========================================== [60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0 [60919.265443] Oops: 0000 [#1] SMP PTI [60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G W 4.19.90+ #1 [60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200 [60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246 [60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007 [60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30 [60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001 [60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30 [60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000 [60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000 [60919.361151] FS: 00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000 [60919.400812] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0 [60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [60919.451608] PKRU: 55555554 [60919.463622] Call Trace: [60919.475617] <IRQ> [60919.487122] ? update_load_avg+0x89/0x5d0 [60919.498478] ? update_load_avg+0x89/0x5d0 [60919.509822] ? account_entity_enqueue+0xc5/0xf0 [60919.520709] security_sock_rcv_skb+0x2a/0x40 [60919.531413] sk_filter_trim_cap+0x47/0x1b0 [60919.542178] ? kmem_cache_alloc+0x38/0x1b0 [60919.552444] sock_queue_rcv_skb+0x17/0x30 [60919.562477] raw_rcv+0x110/0x190 [can_raw] [60919.572539] can_rcv_filter+0xbc/0x1b0 [can] [60919.582173] can_receive+0x6b/0xb0 [can] [60919.591595] can_rcv+0x31/0x70 [can] [60919.600783] __netif_receive_skb_one_core+0x5a/0x80 [60919.609864] process_backlog+0x9b/0x150 [60919.618691] net_rx_action+0x156/0x400 [60919.627310] ? sched_clock_cpu+0xc/0xa0 [60919.635714] __do_softirq+0xe8/0x2e9 [60919.644161] do_softirq_own_stack+0x2a/0x40 [60919.652154] </IRQ> [60919.659899] do_softirq.part.17+0x4f/0x60 [60919.667475] __local_bh_enable_ip+0x60/0x70 [60919.675089] __dev_queue_xmit+0x539/0x920 [60919.682267] ? finish_wait+0x80/0x80 [60919.689218] ? finish_wait+0x80/0x80 [60919.695886] ? sock_alloc_send_pskb+0x211/0x230 [60919.702395] ? can_send+0xe5/0x1f0 [can] [60919.708882] can_send+0xe5/0x1f0 [can] [60919.715037] raw_sendmsg+0x16d/0x268 [can_raw] It's because raw_setsockopt() concurrently with unregister_netdevice_many(). Concurrent scenario as following. cpu0 cpu1 raw_bind raw_setsockopt unregister_netdevice_many unlist_netdevice dev_get_by_index raw_notifier raw_enable_filters ...... can_rx_register can_rcv_list_find(..., net->can.rx_alldev_list) ...... sock_close raw_release(sock_a) ...... can_receive can_rcv_filter(net->can.rx_alldev_list, ...) raw_rcv(skb, sock_a) BUG After unlist_netdevice(), dev_get_by_index() return NULL in raw_setsockopt(). Function raw_enable_filters() will add sock and can_filter to net->can.rx_alldev_list. Then the sock is closed. Followed by, we sock_sendmsg() to a new vcan device use the same can_filter. Protocol stack match the old receiver whose sock has been released on net->can.rx_alldev_list in can_rcv_filter(). Function raw_rcv() uses the freed sock. UAF BUG is triggered. We can find that the key issue is that net_device has not been protected in raw_setsockopt(). Use rtnl_lock to protect net_device in raw_setsockopt(). Fixes: c18ce101f2e4 ("[CAN]: Add raw protocol") Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-23Merge tag 'mac80211-for-net-2021-07-23' of ↵David S. Miller7-33/+63
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Couple of fixes: * fix aggregation on mesh * fix late enabling of 4-addr mode * leave monitor SKBs with some headroom * limit band information for old applications * fix virt-wifi WARN_ON * fix memory leak in cfg80211 BSS list maintenance
2021-07-23net: qrtr: fix memory leaksPavel Skripkin1-1/+5
Syzbot reported memory leak in qrtr. The problem was in unputted struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup() which takes sock reference if port was found. Then there is the following check: if (!ipc || &ipc->sk == skb->sk) { ... return -ENODEV; } Since we should drop the reference before returning from this function and ipc can be non-NULL inside this if, we should add qrtr_port_put() inside this if. The similar corner case is in qrtr_endpoint_post() as Manivannan reported. In case of sock_queue_rcv_skb() failure we need to put port reference to avoid leaking struct sock pointer. Fixes: e04df98adf7d ("net: qrtr: Remove receive worker") Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Reported-and-tested-by: syzbot+35a511c72ea7356cdcf3@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller6-10/+41
Pablo Neira Ayusosays: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Memleak in commit audit error path, from Dongliang Mu. 2) Avoid possible false sharing for flowtable timeout updates and nft_last use. 3) Adjust conntrack timestamp due to garbage collection delay, from Florian Westphal. 4) Fix nft_nat without layer 3 address for the inet family. 5) Fix compilation warning in nfnl_hook when ingress support is disabled, from Arnd Bergmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ipv6: decrease hop limit counter in ip6_forward()Kangmin Park1-2/+3
Decrease hop limit counter when deliver skb to ndp proxy. Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23net: Set true network header for ECN decapsulationGilad Naaman1-1/+1
In cases where the header straight after the tunnel header was another ethernet header (TEB), instead of the network header, the ECN decapsulation code would treat the ethernet header as if it was an IP header, resulting in mishandling and possible wrong drops or corruption of the IP header. In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the inner IPv4 header, and correct its checksum. The offset of the ECT bits in an IPv4 header corresponds to the lower 2 bits of the second octet of the destination MAC address in the ethernet header. The IPv4 checksum corresponds to end of the source address. In order to reproduce: $ ip netns add A $ ip netns add B $ ip -n A link add _v0 type veth peer name _v1 netns B $ ip -n A link set _v0 up $ ip -n A addr add dev _v0 10.254.3.1/24 $ ip -n A route add default dev _v0 scope global $ ip -n B link set _v1 up $ ip -n B addr add dev _v1 10.254.1.6/24 $ ip -n B route add default dev _v1 scope global $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000 $ ip -n B link set gre1 up # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1), # and the inner header has no ECT bits set: $ cat send_pkt.py #!/usr/bin/env python3 from scapy.all import * pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00' b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85' b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb' b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12' b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234' b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ') send(pkt) $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1 $ sudo ip netns exec A python3 send_pkt.py In the original packet, the source/destinatio MAC addresses are dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26 In the received packet, they are dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27 Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io> for helping me pinpoint the origin. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23tipc: fix sleeping in tipc accept routineHoang Le1-5/+4
The release_sock() is blocking function, it would change the state after sleeping. In order to evaluate the stated condition outside the socket lock context, switch to use wait_woken() instead. Fixes: 6398e23cdb1d8 ("tipc: standardize accept routine") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23tipc: fix implicit-connect for SYN+Xin Long1-8/+13
For implicit-connect, when it's either SYN- or SYN+, an ACK should be sent back to the client immediately. It's not appropriate for the client to enter established state only after receiving data from the server. On client side, after the SYN is sent out, tipc_wait_for_connect() should be called to wait for the ACK if timeout is set. This patch also restricts __tipc_sendstream() to call __sendmsg() only when it's in TIPC_OPEN state, so that the client can program in a single loop doing both connecting and data sending like: for (...) sendmsg(dest, buf); This makes the implicit-connect more implicit. Fixes: b97bf3fd8f6a ("[TIPC] Initial merge") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23netfilter: nfnl_hook: fix unused variable warningArnd Bergmann1-0/+2
The only user of this variable is in an #ifdef: net/netfilter/nfnetlink_hook.c: In function 'nfnl_hook_entries_head': net/netfilter/nfnetlink_hook.c:177:28: error: unused variable 'netdev' [-Werror=unused-variable] Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23netfilter: nft_nat: allow to specify layer 4 protocol NAT onlyPablo Neira Ayuso1-1/+3
nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified. Fixes: d07db9884a5f ("netfilter: nf_tables: introduce nft_validate_register_load()") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23netfilter: conntrack: adjust stop timestamp to real expiry valueFlorian Westphal1-1/+6
In case the entry is evicted via garbage collection there is delay between the timeout value and the eviction event. This adjusts the stop value based on how much time has passed. Fixes: b87a2f9199ea82 ("netfilter: conntrack: add gc worker to remove timed-out entries") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23netfilter: nft_last: avoid possible false sharingPablo Neira Ayuso1-7/+13
Use the idiom described in: https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE#it-may-improve-performance Moreover, prevent a compiler optimization. Fixes: 836382dc2471 ("netfilter: nf_tables: add last expression") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23netfilter: flowtable: avoid possible false sharingPablo Neira Ayuso1-1/+5
The flowtable follows the same timeout approach as conntrack, use the same idiom as in cc16921351d8 ("netfilter: conntrack: avoid same-timeout update") but also include the fix provided by e37542ba111f ("netfilter: conntrack: avoid possible false sharing"). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23cfg80211: Fix possible memory leak in function cfg80211_bss_updateNguyen Dinh Phi1-4/+2
When we exceed the limit of BSS entries, this function will free the new entry, however, at this time, it is the last door to access the inputed ies, so these ies will be unreferenced objects and cause memory leak. Therefore we should free its ies before deallocating the new entry, beside of dropping it from hidden_list. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23nl80211: limit band information in non-split dataJohannes Berg1-1/+4
In non-split data, we shouldn't be adding S1G and 6 GHz data (or future bands) since we're really close to the 4k message size limit. Remove those bands, any modern userspace that can use S1G or 6 GHz should already be using split dumps, and if not then it needs to update. Link: https://lore.kernel.org/r/20210712215329.31444162a2c2.I5555312e4a074c84f8b4e7ad79dc4d1fbfc5126c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23mac80211: fix enabling 4-address mode on a sta vif after assocFelix Fietkau3-2/+23
Notify the driver about the 4-address mode change and also send a nulldata packet to the AP to notify it about the change Fixes: 1ff4e8f2dec8 ("mac80211: notify the driver when a sta uses 4-address mode") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23mac80211: fix starting aggregation sessions on mesh interfacesFelix Fietkau1-25/+32
The logic for starting aggregation sessions was recently moved from minstrel_ht to mac80211, into the subif tx handler just after the sta lookup. Unfortunately this didn't work for mesh interfaces, since the sta lookup is deferred until a much later point in time on those. Fix this by also calling the aggregation check right after the deferred sta lookup. Fixes: 08a46c642001 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210629112853.29785-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23mac80211: Do not strip skb headroom on monitor framesJohan Almbladh1-1/+2
When a monitor interface is present together with other interfaces, a received skb is copied and received on the monitor netdev. Before, the copied skb was allocated with exactly the amount of space needed for the radiotap header, resulting in an skb without any headroom at all being received on the monitor netdev. With the introduction of eBPF and XDP in the kernel, skbs may be processed by custom eBPF programs. However, since the skb cannot be reallocated in the eBPF program, no more data or headers can be pushed. The old code made sure the final headroom was zero regardless of the value of NET_SKB_PAD, so increasing that constant would have no effect. Now we allocate monitor skb copies with a headroom of NET_SKB_PAD bytes before the radiotap header. Monitor interfaces now behave in the same way as other netdev interfaces that honor the NET_SKB_PAD constant. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/r/20210628123713.2070753-1-johan.almbladh@anyfinetworks.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-22net: sched: cls_api: Fix the the wrong parameterYajun Deng1-1/+1
The 4th parameter in tc_chain_notify() should be flags rather than seq. Let's change it back correctly. Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: dsa: tag_ksz: dont let the hardware process the layer 4 checksumLino Sanfilippo1-0/+9
If the checksum calculation is offloaded to the network device (e.g due to NETIF_F_HW_CSUM inherited from the DSA master device), the calculated layer 4 checksum is incorrect. This is since the DSA tag which is placed after the layer 4 data is considered as being part of the daa and thus errorneously included into the checksum calculation. To avoid this, always calculate the layer 4 checksum in software. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: dsa: ensure linearized SKBs in case of tail taggersLino Sanfilippo1-5/+9
The function skb_put() that is used by tail taggers to make room for the DSA tag must only be called for linearized SKBS. However in case that the slave device inherited features like NETIF_F_HW_SG or NETIF_F_FRAGLIST the SKB passed to the slaves transmit function may not be linearized. Avoid those SKBs by clearing the NETIF_F_HW_SG and NETIF_F_FRAGLIST flags for tail taggers. Furthermore since the tagging protocol can be changed at runtime move the code for setting up the slaves features into dsa_slave_setup_tagger(). Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21tcp: disable TFO blackhole logic by defaultWei Wang2-2/+9
Multiple complaints have been raised from the TFO users on the internet stating that the TFO blackhole logic is too aggressive and gets falsely triggered too often. (e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/) Considering that most middleboxes no longer drop TFO packets, we decide to disable the blackhole logic by setting /proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default. Fixes: cf1ef3f0719b4 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not setXin Long1-2/+2
Currently, in sctp_packet_config(), sctp_transport_pmtu_check() is called to update transport pathmtu with dst's mtu when dst's mtu has been changed by non sctp stack like xfrm. However, this should only happen when SPP_PMTUD_ENABLE is set, no matter where dst's mtu changed. This patch is to fix by checking SPP_PMTUD_ENABLE flag before calling sctp_transport_pmtu_check(). Thanks Jacek for reporting and looking into this issue. v1->v2: - add the missing "{" to fix the build error. Fixes: 69fec325a643 ('Revert "sctp: remove sctp_transport_pmtu_check"') Reported-by: Jacek Szafraniec <jacek.szafraniec@nokia.com> Tested-by: Jacek Szafraniec <jacek.szafraniec@nokia.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21udp: check encap socket in __udp_lib_errVadim Fedorenko2-12/+38
Commit d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err") added checks for encapsulated sockets but it broke cases when there is no implementation of encap_err_lookup for encapsulation, i.e. ESP in UDP encapsulation. Fix it by calling encap_err_lookup only if socket implements this method otherwise treat it as legal socket. Fixes: d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21sctp: update active_key for asoc when old key is being replacedXin Long1-0/+2
syzbot reported a call trace: BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 Call Trace: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:131 [inline] sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865 sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:723 This is an use-after-free issue caused by not updating asoc->shkey after it was replaced in the key list asoc->endpoint_shared_keys, and the old key was freed. This patch is to fix by also updating active_key for asoc when old key is being replaced with a new one. Note that this issue doesn't exist in sctp_auth_del_key_id(), as it's not allowed to delete the active_key from the asoc. Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key") Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptionsPaolo Abeni1-1/+1
While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net/sched: act_skbmod: Skip non-Ethernet packetsPeilin Ye1-4/+8
Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. Fixes: 86da71b57383 ("net_sched: Introduce skbmod action") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: bridge: do not replay fdb entries pointing towards the bridge twiceVladimir Oltean1-1/+1
This simple script: ip link add br0 type bridge ip link set swp2 master br0 ip link set br0 address 00:01:02:03:04:05 ip link del br0 produces this result on a DSA switch: [ 421.306399] br0: port 1(swp2) entered blocking state [ 421.311445] br0: port 1(swp2) entered disabled state [ 421.472553] device swp2 entered promiscuous mode [ 421.488986] device swp2 left promiscuous mode [ 421.493508] br0: port 1(swp2) entered disabled state [ 421.886107] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 1 from fdb: -ENOENT [ 421.894374] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 0 from fdb: -ENOENT [ 421.943982] br0: port 1(swp2) entered blocking state [ 421.949030] br0: port 1(swp2) entered disabled state [ 422.112504] device swp2 entered promiscuous mode A very simplified view of what happens is: (1) the bridge port is created, and the bridge device inherits its MAC address (2) when joining, the bridge port (DSA) requests a replay of the addition of all FDB entries towards this bridge port and towards the bridge device itself. In fact, DSA calls br_fdb_replay() twice: br_fdb_replay(br, brport_dev); br_fdb_replay(br, br); DSA uses reference counting for the FDB entries. So the MAC address of the bridge is simply kept with refcount 2. When the bridge port leaves under normal circumstances, everything cancels out since the replay of the FDB entry deletion is also done twice per VLAN. (3) when the bridge MAC address changes, switchdev is notified of the deletion of the old address and of the insertion of the new one. But the old address does not really go away, since it had refcount 2, and the new address is added "only" with refcount 1. (4) when the bridge port leaves now, it will replay a deletion of the FDB entries pointing towards the bridge twice. Then DSA will complain that it can't delete something that no longer exists. It is clear that the problem is that the FDB entries towards the bridge are replayed too many times, so let's fix that problem. Fixes: 63c51453c82c ("net: dsa: replay the local bridge FDB entries pointing to the bridge dev too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210719093916.4099032-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20ipv6: ip6_finish_output2: set sk into newly allocated nskbVasily Averin1-1/+1
skb_set_owner_w() should set sk not to old skb but to new nskb. Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: https://lore.kernel.org/r/70c0744f-89ae-1869-7e3e-4fa292158f4b@virtuozzo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-19net/tcp_fastopen: fix data races around tfo_active_disable_stampEric Dumazet1-3/+16
tfo_active_disable_stamp is read and written locklessly. We need to annotate these accesses appropriately. Then, we need to perform the atomic_inc(tfo_active_disable_times) after the timestamp has been updated, and thus add barriers to make sure tcp_fastopen_active_should_disable() wont read a stale timestamp. Fixes: cf1ef3f0719b ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-18netrom: Decrease sock refcount when sock timers expireNguyen Dinh Phi1-9/+11
Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com Fixes: 63346650c1a9 ("netrom: switch to sock timer API") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-18sctp: trim optlen when it's a huge value in sctp_setsockoptXin Long1-0/+4
After commit ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt"), it does memory allocation in sctp_setsockopt with the optlen, and it would fail the allocation and return error if the optlen from user space is a huge value. This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and SCTP_AUTH_KEY, as when processing these sockopts before, optlen would be trimmed to a biggest value it needs when optlen is a huge value, instead of failing the allocation and returning error. This patch is to fix the allocation failure when it's a huge optlen from user space by trimming it to the biggest size sctp sockopt may need when necessary, and this biggest size is from sctp_setsockopt_reset_streams() for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT and SCTP_AUTH_KEY. Fixes: ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-18net: sched: fix memory leak in tcindex_partial_destroy_workPavel Skripkin1-1/+4
Syzbot reported memory leak in tcindex_set_parms(). The problem was in non-freed perfect hash in tcindex_partial_destroy_work(). In tcindex_set_parms() new tcindex_data is allocated and some fields from old one are copied to new one, but not the perfect hash. Since tcindex_partial_destroy_work() is the destroy function for old tcindex_data, we need to free perfect hash to avoid memory leak. Reported-and-tested-by: syzbot+f0bbb2287b8993d4fa74@syzkaller.appspotmail.com Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-18net: Fix zero-copy head len calculation.Pravin B Shelar1-1/+4
In some cases skb head could be locked and entire header data is pulled from skb. When skb_zerocopy() called in such cases, following BUG is triggered. This patch fixes it by copying entire skb in such cases. This could be optimized incase this is performance bottleneck. ---8<--- kernel BUG at net/core/skbuff.c:2961! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:skb_zerocopy+0x37a/0x3a0 RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246 Call Trace: <IRQ> queue_userspace_packet+0x2af/0x5e0 [openvswitch] ovs_dp_upcall+0x3d/0x60 [openvswitch] ovs_dp_process_packet+0x125/0x150 [openvswitch] ovs_vport_receive+0x77/0xd0 [openvswitch] netdev_port_receive+0x87/0x130 [openvswitch] netdev_frame_hook+0x4b/0x60 [openvswitch] __netif_receive_skb_core+0x2b4/0xc90 __netif_receive_skb_one_core+0x3f/0xa0 __netif_receive_skb+0x18/0x60 process_backlog+0xa9/0x160 net_rx_action+0x142/0x390 __do_softirq+0xe1/0x2d6 irq_exit+0xae/0xb0 do_IRQ+0x5a/0xf0 common_interrupt+0xf/0xf Code that triggered BUG: int skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen) { int i, j = 0; int plen = 0; /* length of skb->head fragment */ int ret; struct page *page; unsigned int offset; BUG_ON(!from->head_frag && !hlen); Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 23:32:46 +0000