summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2016-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds47-335/+386
Pull networking fixes from David Miller: 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix Fietkau. 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme. 3) Fix some tg3 ethtool logic bugs, and one that would cause no interrupts to be generated when rx-coalescing is set to 0. From Satish Baddipadige and Siva Reddy Kallam. 4) QLCNIC mailbox corruption and napi budget handling fix from Manish Chopra. 5) Fix fib_trie logic when walking the trie during /proc/net/route output than can access a stale node pointer. From David Forster. 6) Several sctp_diag fixes from Phil Sutter. 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel. 8) Checksum fixup fixes in bpf from Daniel Borkmann. 9) Memork leaks in nfnetlink, from Liping Zhang. 10) Use after free in rxrpc, from David Howells. 11) Use after free in new skb_array code of macvtap driver, from Jason Wang. 12) Calipso resource leak, from Colin Ian King. 13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang. 14) Fix bpf non-linear packet write helpers, from Daniel Borkmann. 15) Fix lockdep splats in macsec, from Sabrina Dubroca. 16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF handling. 17) Various tc-action bug fixes, from CONG Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net_sched: allow flushing tc police actions net_sched: unify the init logic for act_police net_sched: convert tcf_exts from list to pointer array net_sched: move tc offload macros to pkt_cls.h net_sched: fix a typo in tc_for_each_action() net_sched: remove an unnecessary list_del() net_sched: remove the leftover cleanup_a() mlxsw: spectrum: Allow packets to be trapped from any PG mlxsw: spectrum: Unmap 802.1Q FID before destroying it mlxsw: spectrum: Add missing rollbacks in error path mlxsw: reg: Fix missing op field fill-up mlxsw: spectrum: Trap loop-backed packets mlxsw: spectrum: Add missing packet traps mlxsw: spectrum: Mark port as active before registering it mlxsw: spectrum: Create PVID vPort before registering netdevice mlxsw: spectrum: Remove redundant errors from the code mlxsw: spectrum: Don't return upon error in removal path i40e: check for and deal with non-contiguous TCs ixgbe: Re-enable ability to toggle VLAN filtering ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths ...
2016-08-17net_sched: allow flushing tc police actionsRoman Mashak1-42/+1
The act_police uses its own code to walk the action hashtable, which leads to that we could not flush standalone tc police actions, so just switch to tcf_generic_walker() like other actions. (Joint work from Roman and Cong.) Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: unify the init logic for act_policeWANG Cong1-9/+10
Jamal reported a crash when we create a police action with a specific index, this is because the init logic is not correct, we should always create one for this case. Just unify the logic with other tc actions. Fixes: a03e6fe56971 ("act_police: fix a crash during removal") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: convert tcf_exts from list to pointer arrayWANG Cong2-20/+42
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove an unnecessary list_del()WANG Cong1-1/+0
This list_del() for tc action is not needed actually, because we only use this list to chain bulk operations, therefore should not be carried for latter operations. Fixes: ec0595cc4495 ("net_sched: get rid of struct tcf_common") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove the leftover cleanup_a()WANG Cong1-19/+3
After refactoring tc_action into tcf_common, we no longer need to cleanup temporary "actions" in list, they are permanently stored in the hashtable. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-7/+3
Pull virtio/vhost fixes from Michael Tsirkin: - test fixes - a vsock fix * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add dma stubs vhost/test: fix after swiotlb changes vhost/vsock: drop space available check for TX vq ringtest: test build fix
2016-08-15tipc: fix NULL pointer dereference in shutdown()Vegard Nossum1-1/+2
tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15gre: set inner_protocol on xmitSimon Horman2-3/+0
Ensure that the inner_protocol is set on transmit so that GSO segmentation, which relies on that field, works correctly. This is achieved by setting the inner_protocol in gre_build_header rather than each caller of that function. It ensures that the inner_protocol is set when gre_fb_xmit() is used to transmit GRE which was not previously the case. I have observed this is not the case when OvS transmits GRE using lwtunnel metadata (which it always does). Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: ipv6: Fix ping to link-local addresses.Lorenzo Colitti1-16/+17
ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15vhost/vsock: drop space available check for TX vqGerard Garcia1-7/+3
Remove unnecessary use of enable/disable callback notifications and the incorrect more space available check. The virtio_transport_tx_work handles when the TX virtqueue has more buffers available. Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-13net: remove type_check from dev_get_nest_level()Sabrina Dubroca2-8/+4
The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: ipv6: Do not keep IPv6 addresses when IPv6 is disabledMike Manning1-2/+2
If IPv6 is disabled when the option is set to keep IPv6 addresses on link down, userspace is unaware of this as there is no such indication via netlink. The solution is to remove the IPv6 addresses in this case, which results in netlink messages indicating removal of addresses in the usual manner. This fix also makes the behavior consistent with the case of having IPv6 disabled first, which stops IPv6 addresses from being added. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Mike Manning <mmanning@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net/sctp: always initialise sctp_ht_iter::start_failVegard Nossum1-0/+1
sctp_transport_seq_start() does not currently clear iter->start_fail on success, but relies on it being zero when it is allocated (by seq_open_net()). This can be a problem in the following sequence: open() // allocates iter (and implicitly sets iter->start_fail = 0) read() - iter->start() // fails and sets iter->start_fail = 1 - iter->stop() // doesn't call sctp_transport_walk_stop() (correct) read() again - iter->start() // succeeds, but doesn't change iter->start_fail - iter->stop() // doesn't call sctp_transport_walk_stop() (wrong) We should initialize sctp_ht_iter::start_fail to zero if ->start() succeeds, otherwise it's possible that we leave an old value of 1 there, which will cause ->stop() to not call sctp_transport_walk_stop(), which causes all sorts of problems like not calling rcu_read_unlock() (and preempt_enable()), eventually leading to more warnings like this: BUG: sleeping function called from invalid context at mm/slab.h:388 in_atomic(): 0, irqs_disabled(): 0, pid: 16551, name: trinity-c2 Preemption disabled at:[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff81149abb>] preempt_count_add+0x1fb/0x280 [<ffffffff83295892>] _raw_spin_lock+0x12/0x40 [<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff82ec665f>] sctp_transport_walk_start+0x2f/0x60 [<ffffffff82edda1d>] sctp_transport_seq_start+0x4d/0x150 [<ffffffff81439e50>] traverse+0x170/0x850 [<ffffffff8143aeec>] seq_read+0x7cc/0x1180 [<ffffffff814f996c>] proc_reg_read+0xbc/0x180 [<ffffffff813d0384>] do_loop_readv_writev+0x134/0x210 [<ffffffff813d2a95>] do_readv_writev+0x565/0x660 [<ffffffff813d6857>] vfs_readv+0x67/0xa0 [<ffffffff813d6c16>] do_preadv+0x126/0x170 [<ffffffff813d710c>] SyS_preadv+0xc/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83296225>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Notice that this is a subtly different stacktrace from the one in commit 5fc382d875 ("net/sctp: terminate rhashtable walk correctly"). Cc: Xin Long <lucien.xin@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-By: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net/irda: handle iriap_register_lsap() allocation failureVegard Nossum1-2/+6
If iriap_register_lsap() fails to allocate memory, self->lsap is set to NULL. However, none of the callers handle the failure and irlmp_connect_request() will happily dereference it: iriap_register_lsap: Unable to allocated LSAP! ================================================================================ UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2 member access within null pointer of type 'struct lsap_cb' CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3 ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880 ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a Call Trace: [<ffffffff82344f40>] dump_stack+0xac/0xfc [<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a [<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411 [<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970 [<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160 [<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0 [<ffffffff83b78904>] iriap_do_client_event+0x94/0x120 [<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0 [<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630 [<ffffffff83ba90c8>] irda_connect+0x828/0x12d0 [<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340 [<ffffffff833c7e09>] SyS_connect+0x9/0x10 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ The bug seems to have been around since forever. There's more problems with missing error checks in iriap_init() (and indeed all of irda_init()), but that's a bigger problem that needs very careful review and testing. This patch will fix the most serious bug (as it's easily reached from unprivileged userspace). I have tested my patch with a reproducer. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13bpf: fix write helpers with regards to non-linear partsDaniel Borkmann1-52/+18
Fix the bpf_try_make_writable() helper and all call sites we have in BPF, it's currently defect with regards to skbs when the write_len spans into non-linear parts, no matter if cloned or not. There are multiple issues at once. First, using skb_store_bits() is not correct since even if we have a cloned skb, page frags can still be shared. To really make them private, we need to pull them in via __pskb_pull_tail() first, which also gets us a private head via pskb_expand_head() implicitly. This is for helpers like bpf_skb_store_bytes(), bpf_l3_csum_replace(), bpf_l4_csum_replace(). Really, the only thing reasonable and working here is to call skb_ensure_writable() before any write operation. Meaning, via pskb_may_pull() it makes sure that parts we want to access are pulled in and if not does so plus unclones the skb implicitly. If our write_len still fits the headlen and we're cloned and our header of the clone is not writable, then we need to make a private copy via pskb_expand_head(). skb_store_bits() is a bit misleading and only safe to store into non-linear data in different contexts such as 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory"). For above BPF helper functions, it means after fixed bpf_try_make_writable(), we've pulled in enough, so that we operate always based on skb->data. Thus, the call to skb_header_pointer() and skb_store_bits() becomes superfluous. In bpf_skb_store_bytes(), the len check is unnecessary too since it can only pass in maximum of BPF stack size, so adding offset is guaranteed to never overflow. Also bpf_l3/4_csum_replace() helpers must test for proper offset alignment since they use __sum16 pointer for writing resulting csum. The remaining helpers that change skb data not discussed here yet are bpf_skb_vlan_push(), bpf_skb_vlan_pop() and bpf_skb_change_proto(). The vlan helpers internally call either skb_ensure_writable() (pop case) and skb_cow_head() (push case, for head expansion), respectively. Similarly, bpf_skb_proto_xlat() takes care to not mangle page frags. Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Fixes: 91bc4822c3d6 ("tc: bpf: add checksum helpers") Fixes: 3697649ff29e ("bpf: try harder on clones when writing into skb") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13calipso: fix resource leak on calipso_genopt failureColin Ian King1-1/+3
Currently, if calipso_genopt fails then the error exit path does not free the ipv6_opt_hdr new causing a memory leak. Fix this by kfree'ing new on the error exit path. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12bpf: fix bpf_skb_in_cgroup helper namingDaniel Borkmann1-5/+5
While hashing out BPF's current_task_under_cgroup helper bits, it came to discussion that the skb_in_cgroup helper name was suboptimally chosen. Tejun says: So, I think in_cgroup should mean that the object is in that particular cgroup while under_cgroup in the subhierarchy of that cgroup. Let's rename the other subhierarchy test to under too. I think that'd be a lot less confusing going forward. [...] It's more intuitive and gives us the room to implement the real "in" test if ever necessary in the future. Since this touches uapi bits, we need to change this as long as v4.8 is not yet officially released. Thus, change the helper enum and rename related bits. Fixes: 4a482f34afcc ("cgroup: bpf: Add bpf_skb_in_cgroup_proto") Reference: http://patchwork.ozlabs.org/patch/658500/ Suggested-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2016-08-12Merge tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds4-24/+94
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user needs multiple different security services (e.g. krb5i and krb5p). - Stable patch to fix a regression introduced by the use of SO_REUSEPORT, and that prevented the use of multiple different NFS versions to the same server. - TCP socket reconnection timer fixes. - Patch from Neil to disable the use of IPv6 temporary addresses" * tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Cap the transport reconnection timer at 1/2 lease period NFSv4: Cleanup the setting of the nfs4 lease period SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout SUNRPC: Fix reconnection timeouts NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED SUNRPC: disable the use of IPv6 temporary addresses. SUNRPC: allow for upcalls for same uid but different gss service SUNRPC: Fix up socket autodisconnect SUNRPC: Handle EADDRNOTAVAIL on connection failures
2016-08-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-2/+2
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Misc fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: deprecate old transport virtio/s390: keep early_put_chars virtio_blk: Fix a slient kernel panic virtio-vsock: fix include guard typo vhost/vsock: fix vhost virtio_vsock_pkt use-after-free 9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc() virtio: fix error handling for debug builds virtio: fix memory leak in virtqueue_add()
2016-08-10openvswitch: do not ignore netdev errors when creating tunnel vportsMartynas Pumputis3-4/+25
The creation of a tunnel vport (geneve, gre, vxlan) brings up a corresponding netdev, a multi-step operation which can fail. For example, changing a vxlan vport's netdev state to 'up' binds the vport's socket to a UDP port - if the binding fails (e.g. due to the port being in use), the error is currently ignored giving the appearance that the tunnel vport creation completed successfully. Signed-off-by: Martynas Pumputis <martynas@weave.works> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10tipc: fix variable dereference before NULL checkParthasarathy Bhuvaragan1-1/+2
In commit cf6f7e1d5109 ("tipc: dump monitor attributes"), I dereferenced a pointer before checking if its valid. This is reported by static check Smatch as: net/tipc/monitor.c:733 tipc_nl_add_monitor_peer() warn: variable dereferenced before check 'mon' (see line 731) In this commit, we check for a valid monitor before proceeding with any other operation. Fixes: cf6f7e1d5109 ("tipc: dump monitor attributes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller7-20/+26
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Use mod_timer_pending() to avoid reactivating a dead expectation in the h323 conntrack helper, from Liping Zhang. 2) Oneliner to fix a type in the register name defined in the nf_tables header. 3) Don't try to look further when we find an inactive elements with no descendants in the rbtree set implementation, otherwise we crash. 4) Handle valid zero CSeq in the SIP conntrack helper, from Christophe Leroy. 5) Don't display a trailing slash in conntrack helper with no classes via /proc/net/nf_conntrack_expect, from Liping Zhang. 6) Fix an expectation leak during creation from the nfqueue path, again from Liping Zhang. 7) Validate netlink port ID in verdict message from nfqueue, otherwise an injection can be possible. Again from Zhang. 8) Reject conntrack tuples with different transport protocol on original and reply tuples, also from Zhang. 9) Validate offset and length in nft_exthdr, make sure they are under sizeof(u8), from Laura Garcia Liebana. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10netfilter: nft_exthdr: Add size check on u8 nft_exthdr attributesLaura Garcia Liebana1-2/+9
Fix the direct assignment of offset and length attributes included in nft_exthdr structure from u32 data to u8. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09bridge: Fix problems around fdb entries pointing to the bridge deviceToshiaki Makita1-25/+27
Adding fdb entries pointing to the bridge device uses fdb_insert(), which lacks various checks and does not respect added_by_user flag. As a result, some inconsistent behavior can happen: * Adding temporary entries succeeds but results in permanent entries. * Same goes for "dynamic" and "use". * Changing mac address of the bridge device causes deletion of user-added entries. * Replacing existing entries looks successful from userspace but actually not, regardless of NLM_F_EXCL flag. Use the same logic as other entries and fix them. Fixes: 3741873b4f73 ("bridge: allow adding of fdb entries pointing to the bridge device") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09vti: flush x-netns xfrm cache when vti interface is removedLance Richardson1-0/+31
When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09rxrpc: Free packets discarded in data_readyDavid Howells1-0/+2
Under certain conditions, the data_ready handler will discard a packet. These need to be freed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Fix a use-after-push in data_ready handlerDavid Howells1-6/+11
Fix a use of a packet after it has been enqueued onto the packet processing queue in the data_ready handler. Once on a call's Rx queue, we mustn't touch it any more as it may be dequeued and freed by the call processor running on a work queue. Save the values we need before enqueuing. Without this, we can get an oops like the following: BUG: unable to handle kernel NULL pointer dereference at 000000000000009c IP: [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] PGD 0 Oops: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 4.7.0-fsdevel+ #1336 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff88040d6863c0 task.stack: ffff88040d68c000 RIP: 0010:[<ffffffffa01854e8>] [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] RSP: 0018:ffff88041fb03a78 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff8803ff195b00 RCX: 0000000000000001 RDX: ffffffffa01854d1 RSI: 0000000000000008 RDI: ffff8803ff195b00 RBP: ffff88041fb03ab0 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88041fb038c8 R11: 0000000000000000 R12: ffff880406874800 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000009c CR3: 0000000001c14000 CR4: 00000000001406e0 Stack: ffff8803ff195ea0 ffff880408348800 ffff880406874800 ffff8803ff195b00 ffff880408348800 ffff8803ff195ed8 0000000000000000 ffff88041fb03af0 ffffffffa0186072 0000000000000000 ffff8804054da000 0000000000000000 Call Trace: <IRQ> [<ffffffffa0186072>] rxrpc_data_ready+0x89d/0xbae [af_rxrpc] [<ffffffff814c94d7>] __sock_queue_rcv_skb+0x24c/0x2b2 [<ffffffff8155c59a>] __udp_queue_rcv_skb+0x4b/0x1bd [<ffffffff8155e048>] udp_queue_rcv_skb+0x281/0x4db [<ffffffff8155ea8f>] __udp4_lib_rcv+0x7ed/0x963 [<ffffffff8155ef9a>] udp_rcv+0x15/0x17 [<ffffffff81531d86>] ip_local_deliver_finish+0x1c3/0x318 [<ffffffff81532544>] ip_local_deliver+0xbb/0xc4 [<ffffffff81531bc3>] ? inet_del_offload+0x40/0x40 [<ffffffff815322a9>] ip_rcv_finish+0x3ce/0x42c [<ffffffff81532851>] ip_rcv+0x304/0x33d [<ffffffff81531edb>] ? ip_local_deliver_finish+0x318/0x318 [<ffffffff814dff9d>] __netif_receive_skb_core+0x601/0x6e8 [<ffffffff814e072e>] __netif_receive_skb+0x13/0x54 [<ffffffff814e082a>] netif_receive_skb_internal+0xbb/0x17c [<ffffffff814e1838>] napi_gro_receive+0xf9/0x1bd [<ffffffff8144eb9f>] rtl8169_poll+0x32b/0x4a8 [<ffffffff814e1c7b>] net_rx_action+0xe8/0x357 [<ffffffff81051074>] __do_softirq+0x1aa/0x414 [<ffffffff810514ab>] irq_exit+0x3d/0xb0 [<ffffffff810184a2>] do_IRQ+0xe4/0xfc [<ffffffff81612053>] common_interrupt+0x93/0x93 <EOI> [<ffffffff814af837>] ? cpuidle_enter_state+0x1ad/0x2be [<ffffffff814af832>] ? cpuidle_enter_state+0x1a8/0x2be [<ffffffff814af96a>] cpuidle_enter+0x12/0x14 [<ffffffff8108956f>] call_cpuidle+0x39/0x3b [<ffffffff81089855>] cpu_startup_entry+0x230/0x35d [<ffffffff810312ea>] start_secondary+0xf4/0xf7 Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Once packet posted in data_ready, don't retry postingDavid Howells1-5/+3
Once a packet has been posted to a connection in the data_ready handler, we mustn't try reposting if we then find that the connection is dying as the refcount has been given over to the dying connection and the packet might no longer exist. Losing the packet isn't a problem as the peer will retransmit. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Don't access connection from call if pointer is NULLDavid Howells1-0/+4
The call state machine processor sets up the message parameters for a UDP message that it might need to transmit in advance on the basis that there's a very good chance it's going to have to transmit either an ACK or an ABORT. This requires it to look in the connection struct to retrieve some of the parameters. However, if the call is complete, the call connection pointer may be NULL to dissuade the processor from transmitting a message. However, there are some situations where the processor is still going to be called - and it's still going to set up message parameters whether it needs them or not. This results in a NULL pointer dereference at: net/rxrpc/call_event.c:837 To fix this, skip the message pre-initialisation if there's no connection attached. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Need to flag call as being released on connect failureDavid Howells1-0/+2
If rxrpc_new_client_call() fails to make a connection, the call record that it allocated needs to be marked as RXRPC_CALL_RELEASED before it is passed to rxrpc_put_call() to indicate that it no longer has any attachment to the AF_RXRPC socket. Without this, an assertion failure may occur at: net/rxrpc/call_object:635 Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-099p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()Vegard Nossum1-2/+2
The memory allocated by iov_iter_get_pages_alloc() can be allocated with vmalloc() if kmalloc() failed -- see get_pages_array(). In that case we need to free it with vfree(), so let's use kvfree(). The bug manifests like this: BUG: unable to handle kernel paging request at ffffeb0400072da0 IP: [<ffffffff8139c67b>] kfree+0x4b/0x140 PGD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 675 Comm: trinity-c2 Not tainted 4.7.0-rc7+ #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800badef2c0 ti: ffff880069208000 task.ti: ffff880069208000 RIP: 0010:[<ffffffff8139c67b>] [<ffffffff8139c67b>] kfree+0x4b/0x140 RSP: 0000:ffff88006920f3f0 EFLAGS: 00010282 RAX: ffffea0000000000 RBX: ffffc90001cb6000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffffc90001cb6000 RBP: ffff88006920f410 R08: 0000000000000000 R09: dffffc0000000000 R10: ffff8800badefa30 R11: 0000056a3d3b0d9f R12: ffff88006920f620 R13: ffffeb0400072d80 R14: ffff8800baa94078 R15: 0000000000000000 FS: 00007fbd2b437700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffeb0400072da0 CR3: 000000006926d000 CR4: 00000000000006e0 Stack: 0000000000000001 ffff88006920f620 ffffed001755280f ffff8800baa94078 ffff88006920f6a8 ffffffff8310442b dffffc0000000000 ffff8800badefa30 ffff8800badefa28 ffff88011af1fba0 1ffff1000d241e98 ffff8800ba892150 Call Trace: [<ffffffff8310442b>] p9_virtio_zc_request+0x72b/0xdb0 [<ffffffff830f2116>] p9_client_zc_rpc.constprop.8+0x246/0xb10 [<ffffffff830f5d79>] p9_client_read+0x4c9/0x750 [<ffffffff8175ceac>] v9fs_fid_readpage+0x14c/0x320 [<ffffffff8175d0b6>] v9fs_vfs_readpage+0x36/0x50 [<ffffffff812c6f13>] filemap_fault+0x9a3/0xe60 [<ffffffff81331878>] __do_fault+0x158/0x300 [<ffffffff81339e01>] handle_mm_fault+0x1cf1/0x3c80 [<ffffffff810c0aaa>] __do_page_fault+0x30a/0x8e0 [<ffffffff810c10df>] do_page_fault+0x2f/0x80 [<ffffffff810b5b07>] do_async_page_fault+0x27/0xa0 [<ffffffff83296c48>] async_page_fault+0x28/0x30 Code: 00 80 41 54 53 49 01 fd 48 0f 42 05 b0 39 67 02 48 89 fb 49 01 c5 48 b8 00 00 00 00 00 ea ff ff 49 c1 ed 0c 49 c1 e5 06 49 01 c5 <49> 8b 45 20 48 8d 50 ff a8 01 4c 0f 45 ea 49 8b 55 20 48 8d 42 RIP [<ffffffff8139c67b>] kfree+0x4b/0x140 RSP <ffff88006920f3f0> CR2: ffffeb0400072da0 ---[ end trace f3d59a04bafec038 ]--- Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-09rxrpc: fix uninitialized pointer dereference in debug codeArnd Bergmann1-0/+1
A newly added bugfix caused an uninitialized variable to be used for printing debug output. This is harmless as long as the debug setting is disabled, but otherwise leads to an immediate crash. gcc warns about this when -Wmaybe-uninitialized is enabled: net/rxrpc/call_object.c: In function 'rxrpc_release_call': net/rxrpc/call_object.c:496:163: error: 'sp' may be used uninitialized in this function [-Werror=maybe-uninitialized] The initialization was removed but one of the users remains. This adds back the initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 372ee16386bb ("rxrpc: Fix races between skb free, ACK generation and replying") Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09netfilter: ctnetlink: reject new conntrack request with different l4protoLiping Zhang1-0/+2
Currently, user can add a conntrack with different l4proto via nfnetlink. For example, original tuple is TCP while reply tuple is SCTP. This is invalid combination, we should report EINVAL to userspace. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09netfilter: nfnetlink_queue: reject verdict request from different portidLiping Zhang1-4/+2
Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict request when the portid is not same with the initial portid(maybe from another process). Fixes: 97d32cf9440d ("netfilter: nfnetlink_queue: batch verdict support") Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09netfilter: nfnetlink_queue: fix memory leak when attach expectation successfullyLiping Zhang1-6/+2
User can use NFQA_EXP to attach expectations to conntracks, but we forget to put back nf_conntrack_expect when it is inserted successfully, i.e. in this normal case, expect's use refcnt will be 3. So even we unlink it and put it back later, the use refcnt is still 1, then the memory will be leaked forever. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09netfilter: nf_ct_expect: remove the redundant slash when policy name is emptyLiping Zhang1-1/+1
The 'name' filed in struct nf_conntrack_expect_policy{} is not a pointer, so check it is NULL or not will always return true. Even if the name is empty, slash will always be displayed like follows: # cat /proc/net/nf_conntrack_expect 297 l3proto = 2 proto=6 src=1.1.1.1 dst=2.2.2.2 sport=1 dport=1025 ftp/ ^ Fixes: 3a8fc53a45c4 ("netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names") Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-08sctp: use event->chunk when it's validXin Long1-2/+2
Commit 52253db924d1 ("sctp: also point GSO head_skb to the sk when it's available") used event->chunk->head_skb to get the head_skb in sctp_ulpevent_set_owner(). But at that moment, the event->chunk was NULL, as it cloned the skb in sctp_ulpevent_make_rcvmsg(). Therefore, that patch didn't really work. This patch is to move the event->chunk initialization before calling sctp_ulpevent_receive_data() so that it uses event->chunk when it's valid. Fixes: 52253db924d1 ("sctp: also point GSO head_skb to the sk when it's available") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08bpf: fix checksum for vlan push/pop helperDaniel Borkmann1-0/+12
When having skbs on ingress with CHECKSUM_COMPLETE, tc BPF programs don't push rcsum of mac header back in and after BPF run back pull out again as opposed to some other subsystems (ovs, for example). For cases like q-in-q, meaning when a vlan tag for offloading is already present and we're about to push another one, then skb_vlan_push() pushes the inner one into the skb, increasing mac header and skb_postpush_rcsum()'ing the 4 bytes vlan header diff. Likewise, for the reverse operation in skb_vlan_pop() for the case where vlan header needs to be pulled out of the skb, we're decreasing the mac header and skb_postpull_rcsum()'ing the 4 bytes rcsum of the vlan header that was removed. However mangling the rcsum here will lead to hw csum failure for BPF case, since we're pulling or pushing data that was not part of the current rcsum. Changing tc BPF programs in general to push/pull rcsum around BPF_PROG_RUN() is also not really an option since current behaviour is ABI by now, but apart from that would also mean to do quite a bit of useless work in the sense that usually 12 bytes need to be rcsum pushed/pulled also when we don't need to touch this vlan related corner case. One way to fix it would be to push the necessary rcsum fixup down into vlan helpers that are (mostly) slow-path anyway. Fixes: 4e10df9a60d9 ("bpf: introduce bpf_skb_vlan_push/pop() helpers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08bpf: fix checksum fixups on bpf_skb_store_bytesDaniel Borkmann1-2/+2
bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way. Where we ran into an issue with bpf_skb_store_bytes() is when we did a single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The underlying issue has been tracked down to a buffer alignment issue. Meaning, that csum_partial() computations via skb_postpull_rcsum() and skb_postpush_rcsum() pair invoked had a wrong result since they operated on an odd address for the hoplimit, while other computations were done on an even address. This mix doesn't work as-is with skb_postpull_rcsum(), skb_postpush_rcsum() pair as it always expects at least half-word alignment of input buffers, which is normally the case. Thus, instead of these helpers using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(), csum_block_add(), respectively. For unaligned offsets, they rotate the sum to align it to a half-word boundary again, otherwise they work the same as csum_sub() and csum_add(). Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers use a 0 constant for offset so that the compiler optimizes the offset & 1 test away and generates the same code as with csum_sub()/_add(). Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08bpf: also call skb_postpush_rcsum on xmit occasionsDaniel Borkmann1-3/+10
Follow-up to commit f8ffad69c9f8 ("bpf: add skb_postpush_rcsum and fix dev_forward_skb occasions") to fix an issue for dev_queue_xmit() redirect locations which need CHECKSUM_COMPLETE fixups on ingress. For the same reasons as described in f8ffad69c9f8 already, we of course also need this here, since dev_queue_xmit() on a veth device will let us end up in the dev_forward_skb() helper again to cross namespaces. Latter then calls into skb_postpull_rcsum() to pull out L2 header, so that netif_rx_internal() sees CHECKSUM_COMPLETE as it is expected. That is, CHECKSUM_COMPLETE on ingress covering L2 _payload_, not L2 headers. Also here we have to address bpf_redirect() and bpf_clone_redirect(). Fixes: 3896d655f4d4 ("bpf: introduce bpf_clone_redirect() helper") Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08sctp_diag: Respect ss adding TCPF_CLOSE to idiag_statesPhil Sutter1-2/+2
Since 'ss' always adds TCPF_CLOSE to idiag_states flags, sctp_diag can't rely upon TCPF_LISTEN flag solely being present when listening sockets are requested. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08sctp_diag: Fix T3_rtx timer exportPhil Sutter1-4/+10
The asoc's timer value is not kept in asoc->timeouts array but in it's primary transport instead. Furthermore, we must export the timer only if it is pending, otherwise the value will underrun when stored in an unsigned variable and user space will only see a very large timeout value. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08libceph: using kfree_rcu() to simplify the codeWei Yongjun1-7/+1
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-08-08libceph: make cancel_generic_request() staticWei Yongjun1-1/+1
Fixes the following sparse warning: net/ceph/mon_client.c:577:6: warning: symbol 'cancel_generic_request' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-08-08libceph: fix return value check in alloc_msg_with_page_vector()Wei Yongjun1-1/+1
In case of error, the function ceph_alloc_page_vector() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 1907920324f1 ('libceph: support for sending notifies') Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-08-08netfilter: nf_conntrack_sip: CSeq 0 is a valid CSeqChristophe Leroy1-2/+2
Do not drop packet when CSeq is 0 as 0 is also a valid value for CSeq. simple_strtoul() will return 0 either when all digits are 0 or if there are no digits at all. Therefore when simple_strtoul() returns 0 we check if first character is digit 0 or not. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-08netfilter: nft_rbtree: ignore inactive matching element with no descendantsPablo Neira Ayuso1-4/+6
If we find a matching element that is inactive with no descendants, we jump to the found label, then crash because of nul-dereference on the left branch. Fix this by checking that the element is active and not an interval end and skipping the logic that only applies to the tree iteration. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Tested-by: Anders K. Pedersen <akp@akp.dk>
2016-08-08netfilter: nf_ct_h323: do not re-activate already expired timerLiping Zhang1-1/+2
Commit 96d1327ac2e3 ("netfilter: h323: Use mod_timer instead of set_expect_timeout") just simplify the source codes if (!del_timer(&exp->timeout)) return 0; add_timer(&exp->timeout); to mod_timer(&exp->timeout, jiffies + info->timeout * HZ); This is not correct, and introduce a race codition: CPU0 CPU1 - timer expire process_rcf expectation_timed_out lock(exp_lock) - find_exp waiting exp_lock... re-activate timer!! waiting exp_lock... unlock(exp_lock) lock(exp_lock) - unlink expect - free(expect) - unlock(exp_lock) So when the timer expires again, we will access the memory that was already freed. Replace mod_timer with mod_timer_pending here to fix this problem. Fixes: 96d1327ac2e3 ("netfilter: h323: Use mod_timer instead of set_expect_timeout") Cc: Gao Feng <fgao@ikuai8.com> Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-06Merge tag 'mac80211-for-davem-2016-08-05' of ↵David S. Miller8-20/+51
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== First set of fixes for the current cycle: * fix 80+80 bandwidth warning * fix powersave with mac80211 TXQ implementation * use correct way to free SKBs from multicast buffering * mesh: fix operation ordering to work with all drivers * mesh: end service period even when peer goes away * mesh: correct HT opmode validity checks * pass hw pointer from mac80211 to driver in TPT method, fixing a bug (in a bit the wrong way, but that's what we have right now) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>