| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently the driver is able to create leaf nodes for the devlink-rate,
but is unable to set parent for them. This wasn't as issue before the
possibility to export hierarchy from the driver. After adding the export
feature, in order for the driver to supply correct hierarchy, it's
necessary for it to be able to supply a parent name to
devl_rate_leaf_create().
Introduce a new parameter 'parent_name' in devl_rate_leaf_create().
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently it's not possible to reassign the parent of the node using one
command. As the previous commit introduced a way to export entire
hierarchy from the driver, being able to modify and reassign parents
become important. This way user might easily change QoS settings without
interrupting traffic.
Example command:
devlink port function rate set pci/0000:4b:00.0/1 parent node_custom_1
This reassigns leaf node parent to node_custom_1.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Intel 100G card internal firmware hierarchy for Hierarchicial QoS is very
rigid and can't be easily removed. This requires an ability to export
default hierarchy to allow user to modify it. Currently the driver is
only able to create the 'leaf' nodes, which usually represent the vport.
This is not enough for HQoS implemented in Intel hardware.
Introduce new function devl_rate_node_create() that allows for creation
of the devlink-rate nodes from the driver.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_weight' needs to be introduced. This attribute allows
for usage of Weighted Fair Queuing arbitration scheme among siblings.
This arbitration scheme can be used simultaneously with the strict
priority.
Introduce new attribute in devlink-rate that will allow for configuration
of Weighted Fair Queueing. New attribute is optional.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To fully utilize offload capabilities of Intel 100G card QoS capabilities
new attribute 'tx_priority' needs to be introduced. This attribute allows
for usage of strict priority arbiter among siblings. This arbitration
scheme attempts to schedule nodes based on their priority as long as the
nodes remain within their bandwidth limit.
Introduce new attribute in devlink-rate that will allow for configuration
of strict priority. New attribute is optional.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Issue a request_module() call when an attempt to change the tagging
protocol is made, either by sysfs or by device tree. In the case of
ocelot (the only driver for which the default and the alternative
tagging protocol are compiled as different modules), the user is now no
longer required to insert tag_ocelot_8021q.ko manually.
In the particular case of ocelot, this solves a problem where
tag_ocelot_8021q.ko is built as module, and this is present in the
device tree:
&mscc_felix_port4 {
dsa-tag-protocol = "ocelot-8021q";
};
&mscc_felix_port5 {
dsa-tag-protocol = "ocelot-8021q";
};
Because no one attempts to load the module into the kernel at boot time,
the switch driver will fail to probe (actually forever defer) until
someone manually inserts tag_ocelot_8021q.ko. This is now no longer
necessary and happens automatically.
Rename dsa_find_tagger_by_name() to denote the change in functionality:
there is now feature parity with dsa_tag_driver_get_by_id(), i.o.w. we
also load the module if it's missing.
Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A future patch will introduce one more way of getting a reference on a
tagging protocl driver (by name). Rename the current method to "by_id".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, dsa_find_tagger_by_name() uses sysfs_streq() which works both
with strings that contain \n at the end (echo ocelot > .../dsa/tagging)
and with strings that don't (printf ocelot > .../dsa/tagging).
There will be a problem once we'll want to construct the modalias string
based on which we auto-load the protocol kernel module. If the sysfs
buffer ends in a newline, we need to strip it first. This is a
preparatory patch specifically for that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, tagging protocol drivers have a modalias of
"dsa_tag:id-<number>", where the number is one of DSA_TAG_PROTO_*_VALUE.
This modalias makes it possible for the request_module() call in
dsa_tag_driver_get() to work, given the input it has - an integer
returned by ds->ops->get_tag_protocol().
It is also possible to change tagging protocols at (pseudo-)runtime, via
sysfs or via device tree, and this works via the name string of the
tagging protocol rather than via its id (DSA_TAG_PROTO_*_VALUE).
In the latter case, there is no request_module() call, because there is
no association that the DSA core has between the string name and the ID,
to construct the modalias. The module is simply assumed to have been
inserted. This is actually slightly problematic when the tagging
protocol change should take place at probe time, since it's expected
that the dependency module should get autoloaded.
For this purpose, let's introduce a second modalias, so that the DSA
core can call request_module() by name. There is no reason to make the
modalias by name optional, so just modify the MODULE_ALIAS_DSA_TAG_DRIVER()
macro to take both the ID and the name as arguments, and generate two
modaliases behind the scenes.
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's autumn cleanup time, and today's target are modaliases.
Michael says that for users of modinfo, "dsa_tag-20" is not the most
suggestive name, and recommends a change to "dsa_tag-id-20".
Andrew points out that other modaliases have a prefix delimited by
colons, so he recommends "dsa_tag:20" instead of "dsa_tag-20".
To satisfy both proposals, Florian recommends "dsa_tag:id-20".
The modaliases are not stable ABI, and the essential information
(protocol ID) is still conveyed in the new string, which
request_module() must be adapted to form.
Link: 20221027210830.3577793-1-vladimir.oltean@nxp.com
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Michael Walle <michael@walle.cc>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DSA tagging protocol driver macros are in the public include/net/dsa.h
probably because that's also where the DSA_TAG_PROTO_*_VALUE macros are
(MODULE_ALIAS_DSA_TAG_DRIVER hinges on those macro definitions).
But there is no reason to expose these helpers to <net/dsa.h>. That
header is shared between switch drivers (drivers/net/dsa/), tagging
protocol drivers (net/dsa/tag_*.c), the DSA core (net/dsa/ sans tag_*.c),
and the rest of the world (DSA master drivers, network stack, etc).
Too much exposure.
On the other hand, net/dsa/dsa_priv.h is included only by the DSA core
and by DSA tagging protocol drivers (or IOW, "friend" modules). Also a
bit too much exposure - I've contemplated creating a new header which is
only included by tagging protocol drivers, but completely separating a
new dsa_tag_proto.h from dsa_priv.h is not immediately trivial - for
example dsa_slave_to_port() is used both from the fast path and from the
control path.
So for now, move these definitions to dsa_priv.h which at least hides
them from the world.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a user port does not have a label in device tree, and we thus
fall back to the eth%d scheme, the proper constant to use is
NET_NAME_ENUM. See also commit e9f656b7a214 ("net: ethernet: set
default assignment identifier to NET_NAME_ENUM"), which in turn quoted
commit 685343fc3ba6 ("net: add name_assign_type netdev attribute"):
... when the kernel has given the interface a name using global
device enumeration based on order of discovery (ethX, wlanY, etc)
... are labelled NET_NAME_ENUM.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.faineli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a user port has a label in device tree, the corresponding
netdevice is, to quote include/uapi/linux/netdevice.h, "predictably
named by the kernel". This is also explicitly one of the intended use
cases for NET_NAME_PREDICTABLE, quoting 685343fc3ba6 ("net: add
name_assign_type netdev attribute"):
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
[...] Examples include [...] and names deduced from hardware
properties (including being given explicitly by the firmware).
Expose that information properly for the benefit of userspace tools
that make decisions based on the name_assign_type attribute,
e.g. a systemd-udev rule with "kernel" in NamePolicy.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.faineli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following two patches each have a (small) chance of causing
regressions for userspace and will in that case of course need to be
reverted.
In order to prepare for that and make those two patches independent
and individually revertable, refactor the code which sets the names
for user ports by moving the "fall back to eth%d if no label is given
in device tree" to dsa_slave_create().
No functional change (at least none intended).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.faineli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
include/linux/bpf.h
1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value")
aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record")
f71b2f64177a ("bpf: Refactor map->off_arr handling")
https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The subh.addip_hdr pointer is also of type (struct sctp_addiphdr *), so
it does not require a cast.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20221115020705.3220-1-zeming@nfschina.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Annotate the lockless read of queue->synflood_warned.
Following xchg() has the needed data-race resolution.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The valptr pointer is of (void *) type, so other pointers need not be
forced to assign values to it.
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On embedded systems with little memory and no relevant
security concerns, it is beneficial to reduce the size
of the table.
Reducing the size from 2^16 to 2^8 saves 255 KiB
of kernel RAM.
Makes the table size configurable as an expert option.
The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to
2^16").
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.
l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.
We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.
v4:
- serialize write to sk_user_data in l2tp sk_destruct
v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data
v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags
Cc: Tom Parkin <tparkin@katalix.com>
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of code paths in tunnels are lockless (eg NETIF_F_LLTX in tx).
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of code paths in tunnels are lockless (eg NETIF_F_LLTX in tx).
Adopt SMP safe DEV_STATS_{INC|ADD}() to update dev->stats fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Long standing KCSAN issues are caused by data-race around
some dev->stats changes.
Most performance critical paths already use per-cpu
variables, or per-queue ones.
It is reasonable (and more correct) to use atomic operations
for the slow paths.
This patch adds an union for each field of net_device_stats,
so that we can convert paths that are not yet protected
by a spinlock or a mutex.
netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64
Note that the memcpy() we were using on 64bit arches
had no provision to avoid load-tearing,
while atomic_long_read() is providing the needed protection
at no cost.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adopt atomic64_try_cmpxchg() and remove the loop,
to make the intent more obvious.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This makes code a bit cleaner.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This makes the code slightly more efficient.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adopting atomic_try_cmpxchg() makes the code cleaner.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adopt atomic_try_cmpxchg() which is slightly more efficient.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adopt atomic_long_try_cmpxchg() in mm_account_pinned_pages()
as it is slightly more efficient.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC 2863 says:
The lowerLayerDown state is also a refinement on the down state.
This new state indicates that this interface runs "on top of" one or
more other interfaces (see ifStackTable) and that this interface is
down specifically because one or more of these lower-layer interfaces
are down.
DSA interfaces are virtual network devices, stacked on top of the DSA
master, but they have a physical MAC, with a PHY that reports a real
link status.
But since DSA (perhaps improperly) uses an iflink to describe the
relationship to its master since commit c084080151e1 ("dsa: set ->iflink
on slave interfaces to the ifindex of the parent"), default_operstate()
will misinterpret this to mean that every time the carrier of a DSA
interface is not ok, it is because of the master being not ok.
In fact, since commit c0a8a9c27493 ("net: dsa: automatically bring user
ports down when master goes down"), DSA cannot even in theory be in the
lowerLayerDown state, because it just calls dev_close_many(), thereby
going down, when the master goes down.
We could revert the commit that creates an iflink between a DSA user
port and its master, especially since now we have an alternative
IFLA_DSA_MASTER which has less side effects. But there may be tooling in
use which relies on the iflink, which has existed since 2009.
We could also probably do something local within DSA to overwrite what
rfc2863_policy() did, in a way similar to hsr_set_operstate(), but this
seems like a hack.
What seems appropriate is to follow the iflink, and check the carrier
status of that interface as well. If that's down too, yes, keep
reporting lowerLayerDown, otherwise just down.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The maximum hash table size is 64K due to the nature of the protocol. [0]
It's smaller than TCP, and fewer sockets can cause a performance drop.
On an EC2 c5.24xlarge instance (192 GiB memory), after running iperf3 in
different netns, creating 32Mi sockets without data transfer in the root
netns causes regression for the iperf3's connection.
uhash_entries sockets length Gbps
64K 1 1 5.69
1Mi 16 5.27
2Mi 32 4.90
4Mi 64 4.09
8Mi 128 2.96
16Mi 256 2.06
32Mi 512 1.12
The per-netns hash table breaks the lengthy lists into shorter ones. It is
useful on a multi-tenant system with thousands of netns. With smaller hash
tables, we can look up sockets faster, isolate noisy neighbours, and reduce
lock contention.
The max size of the per-netns table is 64K as well. This is because the
possible hash range by udp_hashfn() always fits in 64K within the same
netns and we cannot make full use of the whole buckets larger than 64K.
/* 0 < num < 64K -> X < hash < X + 64K */
(num + net_hash_mix(net)) & mask;
Also, the min size is 128. We use a bitmap to search for an available
port in udp_lib_get_port(). To keep the bitmap on the stack and not
fire the CONFIG_FRAME_WARN error at build time, we round up the table
size to 128.
The sysctl usage is the same with TCP:
$ dmesg | cut -d ' ' -f 6- | grep "UDP hash"
UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
# sysctl net.ipv4.udp_hash_entries
net.ipv4.udp_hash_entries = 65536 # can be changed by uhash_entries
# sysctl net.ipv4.udp_child_hash_entries
net.ipv4.udp_child_hash_entries = 0 # disabled by default
# ip netns add test1
# ip netns exec test1 sysctl net.ipv4.udp_hash_entries
net.ipv4.udp_hash_entries = -65536 # share the global table
# sysctl -w net.ipv4.udp_child_hash_entries=100
net.ipv4.udp_child_hash_entries = 100
# ip netns add test2
# ip netns exec test2 sysctl net.ipv4.udp_hash_entries
net.ipv4.udp_hash_entries = 128 # own a per-netns table with 2^n buckets
We could optimise the hash table lookup/iteration further by removing
the netns comparison for the per-netns one in the future. Also, we
could optimise the sparse udp_hslot layout by putting it in udp_table.
[0]: https://lore.kernel.org/netdev/4ACC2815.7010101@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use udp_table directly in most places.
Instead, access it via net->ipv4.udp_table.
The access will be valid only while initialising udp_table
itself and creating/destroying each netns.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use the global udp_seq_afinfo.udp_table
to fetch a UDP hash table.
Instead, set NULL to udp_seq_afinfo.udp_table for UDP and get
a proper table from net->ipv4.udp_table.
Note that we still need udp_seq_afinfo.udp_table for UDP LITE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use the global sk->sk_prot->h.udp_table
to fetch a UDP hash table.
Instead, set NULL to sk->sk_prot->h.udp_table for UDP and get
a proper table from net->ipv4.udp_table.
Note that we still need sk->sk_prot->h.udp_table for UDP LITE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert. The change is mainly to keep reverse
christmas tree order.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned
storage for private and shared data"), we had a call to
tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at
tree teardown time.
There were problems with connecting to a switch tree as a whole, so this
got reworked to connecting to individual switches within the tree. In
this process, tag_ops->disconnect(ds) was made to be called only from
switch.c (cross-chip notifiers emitted as a result of dynamic tag proto
changes), but the normal driver teardown code path wasn't replaced with
anything.
Solve this problem by adding a function that does the opposite of
dsa_switch_setup_tag_protocol(), which is called from the equivalent
spot in dsa_switch_teardown(). The positioning here also ensures that we
won't have any use-after-free in tagging protocol (*rcv) ops, since the
teardown sequence is as follows:
dsa_tree_teardown
-> dsa_tree_teardown_master
-> dsa_master_teardown
-> unsets master->dsa_ptr, making no further packets match the
ETH_P_XDSA packet type handler
-> dsa_tree_teardown_ports
-> dsa_port_teardown
-> dsa_slave_destroy
-> unregisters DSA net devices, there is even a synchronize_net()
in unregister_netdevice_many()
-> dsa_tree_teardown_switches
-> dsa_switch_teardown
-> dsa_switch_teardown_tag_protocol
-> finally frees the tagger-owned storage
Fixes: 7f2973149c22 ("net: dsa: make tagging protocols connect to individual switches from a tree")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221114143551.1906361-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As of now, no DSA driver uses a custom link mode validation procedure
anymore. So remove this DSA operation and let phylink determine what is
supported based on config->mac_capabilities (if provided by the driver).
Leave a comment why we left the code that we did, and that there is more
work to do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Fix sparse warning in the new nft_inner expression, reported
by Jakub Kicinski.
2) Incorrect vlan header check in nft_inner, from Peng Wu.
3) Two patches to pass reset boolean to expression dump operation,
in preparation for allowing to reset stateful expressions in rules.
This adds a new NFT_MSG_GETRULE_RESET command. From Phil Sutter.
4) Inconsistent indentation in nft_fib, from Jiapeng Chong.
5) Speed up siphash calculation in conntrack, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: use siphash_4u64
netfilter: rpfilter/fib: clean up some inconsistent indenting
netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET
netfilter: nf_tables: Extend nft_expr_ops::dump callback parameters
netfilter: nft_inner: fix return value check in nft_inner_parse_l2l3()
netfilter: nft_payload: use __be16 to store gre version
====================
Link: https://lore.kernel.org/r/20221115095922.139954-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
x25_lapb_receive_frame() using skb_copy() to get a private copy of
skb, the new skb should be freed in the undersized/fragmented skb
error handling path. Otherwise there is a memory leak.
Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a metadata dst is present with the type METADATA_HW_PORT_MUX on a dsa cpu
port netdev, assume that it carries the port number and that there is no DSA
tag present in the skb data.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes a frame size warning, reported by kernel test robot.
>> net/dcb/dcbnl.c:1230:1: warning: the frame size of 1244 bytes is
>> larger than 1024 bytes [-Wframe-larger-than=]
The getapptrust part of dcbnl_ieee_fill is moved to a separate function,
and the selector array is now dynamically allocated, instead of stack
allocated.
Tested on microchip sparx5 driver.
Fixes: 6182d5875c33 ("net: dcb: add new apptrust attribute")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20221114092950.2490451-1-daniel.machon@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The bridge driver can offload VLANs to the underlying hardware either
via switchdev or the 8021q driver. When the former is used, the VLAN is
marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV'
private flag.
To avoid the memory leaks mentioned in the cited commit, the bridge
driver will try to delete a VLAN via the 8021q driver if the VLAN is not
marked with the previously mentioned flag.
When the VLAN protocol of the bridge changes, switchdev drivers are
notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but
the 8021q driver is also called to add the existing VLANs with the new
protocol and delete them with the old protocol.
In case the VLANs were offloaded via switchdev, the above behavior is
both redundant and buggy. Redundant because the VLANs are already
programmed in hardware and drivers that support VLAN protocol change
(currently only mlx5) change the protocol upon the switchdev attribute
notification. Buggy because the 8021q driver is called despite these
VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to
memory leaks [1] when the VLANs are deleted.
Fix by not calling the 8021q driver for VLANs that were already
programmed via switchdev.
[1]
unreferenced object 0xffff8881f6771200 (size 256):
comm "ip", pid 446855, jiffies 4298238841 (age 55.240s)
hex dump (first 32 bytes):
00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000012819ac>] vlan_vid_add+0x437/0x750
[<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920
[<000000000632b56f>] br_changelink+0x3d6/0x13f0
[<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0
[<00000000f6276baf>] rtnl_newlink+0x5f/0x90
[<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00
[<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340
[<0000000010588814>] netlink_unicast+0x438/0x710
[<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40
[<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0
[<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0
[<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0
[<00000000684f7e25>] __sys_sendmsg+0xab/0x130
[<000000004538b104>] do_syscall_64+0x3d/0x90
[<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 279737939a81 ("net: bridge: Fix VLANs memory leak")
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221114084509.860831-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sk->sk_receive_queue is protected by skb queue lock, but for KCM
sockets its RX path takes mux->rx_lock to protect more than just
skb queue. However, kcm_recvmsg() still only grabs the skb queue
lock, so race conditions still exist.
We can teach kcm_recvmsg() to grab mux->rx_lock too but this would
introduce a potential performance regression as struct kcm_mux can
be shared by multiple KCM sockets.
So we have to enforce skb queue lock in requeue_rx_msgs() and handle
skb peek case carefully in kcm_wait_data(). Fortunately,
skb_recv_datagram() already handles it nicely and is widely used by
other sockets, we can just switch to skb_recv_datagram() after
getting rid of the unnecessary sock lock in kcm_recvmsg() and
kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets,
so it is safe to get rid of this check too.
I ran the original syzbot reproducer for 30 min without seeing any
issue.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+278279efdd2730dd14bf@syzkaller.appspotmail.com
Reported-by: shaozhengchao <shaozhengchao@huawei.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20221114005119.597905-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This function is used for every packet, siphash_4u64 is noticeably faster
than using local buffer + siphash:
Before:
1.23% kpktgend_0 [kernel.vmlinux] [k] __siphash_unaligned
0.14% kpktgend_0 [nf_conntrack] [k] hash_conntrack_raw
After:
0.79% kpktgend_0 [kernel.vmlinux] [k] siphash_4u64
0.15% kpktgend_0 [nf_conntrack] [k] hash_conntrack_raw
In the pktgen test this gives about ~2.4% performance improvement.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No functional modification involved.
net/ipv4/netfilter/nft_fib_ipv4.c:141 nft_fib4_eval() warn: inconsistent indenting.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2733
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Analogous to NFT_MSG_GETOBJ_RESET, but for rules: Reset stateful
expressions like counters or quotas. The latter two are the only
consumers, adjust their 'dump' callbacks to respect the parameter
introduced earlier.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a 'reset' flag just like with nft_object_ops::dump. This will be
useful to reset "anonymous stateful objects", e.g. simple rule counters.
No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The SYN flood message prints the listening port number, but with many
processes bound to the same port on different IPs, it's impossible to
tell which socket is the problem.
Add the listen IP address to the SYN flood message.
For IPv6 use "[IP]:port" as per RFC-5952 and to provide ease of
copy-paste to "ss" filters. For IPv4 use "IP:port" to match.
Each protcol's "any" address and a host address now look like:
Possible SYN flooding on port 0.0.0.0:9001.
Possible SYN flooding on port 127.0.0.1:9001.
Possible SYN flooding on port [::]:9001.
Possible SYN flooding on port [fc00::1]:9001.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/4fedab7ce54a389aeadbdc639f6b4f4988e9d2d7.1668386107.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are multi-generational drivers like mv88e6xxx which have code like
this:
int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port,
struct ifreq *ifr)
{
if (!chip->info->ptp_support)
return -EOPNOTSUPP;
...
}
DSA wants to deny PTP timestamping on the master if the switch supports
timestamping too. However it currently relies on the presence of the
port_hwtstamp_get() callback to determine PTP capability, and this
clearly does not work in that case (method is present but returns
-EOPNOTSUPP).
We should not deny PTP on the DSA master for those switches which truly
do not support hardware timestamping.
Create a dsa_port_supports_hwtstamp() method which actually probes for
support by calling port_hwtstamp_get() and seeing whether that returned
-EOPNOTSUPP or not.
Fixes: f685e609a301 ("net: dsa: Deny PTP on master if switch supports it")
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221110124345.3901389-1-festevam@gmail.com/
Reported-by: Fabio Estevam <festevam@gmail.com>
Reported-by: Steffen Bätz <steffen@innosonix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
