summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2015-06-15mac802154: rx packet handle cleanupVarka Bhadram1-2/+4
This patch replaces !netif_running(sdata->dev) with !ieee802154_sdata_running(sdata) and also devide the code two separate if branches. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Remove redundant check for ACL_LINKJohan Hedberg1-2/+1
The encryption key size is read only for BR/EDR (ACL_LINK) connections so there's no need to check for it in the read_enc_key_size_complete() callback. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Use actual encryption key size for SMP over BR/EDRJohan Hedberg1-2/+2
When pairing over SMP over BR/EDR the generated LTK has by default the same key size as the BR/EDR Link Key. Make sure we don't set our Pairing Request/Response max value to anything higher than that. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Read encryption key size for BR/EDR connectionsJohan Hedberg1-0/+87
Since Bluetooth 3.0 there's a HCI command available for reading the encryption key size of an BR/EDR connection. This information is essential e.g. for generating an LTK using SMP over BR/EDR, so store it as part of struct hci_conn. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Move SC-only check outside of BT_CONFIG branchJohan Hedberg1-12/+12
Checking for SC-only mode requirements when we get an encrypt change event shouldn't be limited to the BT_CONFIG state but done any time encryption changes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Add debugfs support for min LE encryption key sizeJohan Hedberg1-1/+50
This patch adds a debugfs control to set a different minimum LE encryption key size. This is useful for testing that implementation of the encryption key size handling is behaving correctly (e.g. that we get appropriate 'Encryption Key Size' error responses when necessary). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Add debugfs support for max LE encryption key sizeJohan Hedberg1-4/+57
This patch adds a debugfs control to set a different maximum LE encryption key size. This is useful for testing that implementation of the encryption key size handling is behaving correctly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-11Bluetooth: Stop sabotaging list poisoningAlexey Dobriyan1-6/+2
list_del() poisons pointers with special values, no need to overwrite them. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-10Bluetooth: Fix exposing full value of shortened LTKsJohan Hedberg2-2/+14
When we notify user space of a new LTK or distribute an LTK to the remote peer the value passed should be the shortened version so that it's easy to compare values in various traces. The core spec also sets the requirements for the shortening/masking as: "The masking shall be done after generation and before being distributed, used or stored." Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Move SCO support under BT_BREDR config optionArron Wang1-1/+2
SCO/eSCO link is supported by BR/EDR controller, it is suitable to move them under BT_BREDR config option Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Make l2cap_recv_acldata() and sco_recv_scodata() return voidArron Wang2-6/+4
The return value of l2cap_recv_acldata() and sco_recv_scodata() are not used, then change it to return void Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Don't call shutdown when leaving user channelLoic Poulain1-0/+1
Don't interfere with the user channel exclusive access. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09mac802154/iface: remove superfluous WARN_ON call in slave_open()Stefan Schmidt1-1/+0
This call was used before we aligned our code with the wireless code base. We are wanted to handle this in the err: code path. Which would actually not work because the WARN_ON() macro would reset the res value to 0 and thus we would never hit err:. Removing it makes the code do what we actually intend. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Fix encryption key size handling for LTKsJohan Hedberg3-15/+7
The encryption key size for LTKs is supposed to be applied only at the moment of encryption. When generating a Link Key (using LE SC) from the LTK the full non-shortened value should be used. This patch modifies the code to always keep the full value around and only apply the key size when passing the value to HCI. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-08Bluetooth: Fix race condition with user channel and setup stageMarcel Holtmann1-7/+19
During the initial setup stage of a controller, the low-level transport is actually active. This means that HCI_UP is true. To avoid toggling the transport off and back on again for normal operation the kernel holds a grace period with HCI_AUTO_OFF that will turn the low-level transport off in case no user is present. The idea of the grace period is important to avoid having to initialize all of the controller twice. So legacy ioctl and the new management interface knows how to clear this grace period and then start normal operation. For the user channel operation this grace period has not been taken into account which results in the problem that HCI_UP and HCI_AUTO_OFF are set and the kernel will return EBUSY. However from a system point of view the controller is ready to be grabbed by either the ioctl, the management interface or the user channel. This patch brings the user channel to the same level as the other two entries for operating a controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
2015-06-07mac802154: remove unneeded vif structAlexander Aring3-9/+6
This patch removes the virtual interface structure from sub if data struct, because it isn't used anywhere. This structure could be useful for give per interface information at softmac driver layer. Nevertheless there exist no use case currently and it contains the interface type information currently. This information is also stored inside wpan dev which is now used to check on the wpan dev interface type. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: Reorder HCI user channel socket releaseLoic Poulain1-2/+2
The hci close method needs to know if we are in user channel context. Only add the index to mgmt once close is performed. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: Fix potential NULL dereference in RFCOMM bind callbackJaganath Kanakkassery1-8/+12
addr can be NULL and it should not be dereferenced before NULL checking. Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-04nl802154: export supported commandsVarka Bhadram1-0/+40
This patch will export the supported commands by the devices to the userspace. This will be useful to check if HardMAC drivers can support a specific command or not. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-04ieee802154: Fix sockaddr_ieee802154 implicit padding information leak.Lennert Buytenhek1-0/+6
The AF_IEEE802154 sockaddr looks like this: struct sockaddr_ieee802154 { sa_family_t family; /* AF_IEEE802154 */ struct ieee802154_addr_sa addr; }; struct ieee802154_addr_sa { int addr_type; u16 pan_id; union { u8 hwaddr[IEEE802154_ADDR_LEN]; u16 short_addr; }; }; On most architectures there will be implicit structure padding here, in two different places: * In struct sockaddr_ieee802154, two bytes of padding between 'family' (unsigned short) and 'addr', so that 'addr' starts on a four byte boundary. * In struct ieee802154_addr_sa, two bytes at the end of the structure, to make the structure 16 bytes. When calling recvmsg(2) on a PF_IEEE802154 SOCK_DGRAM socket, the ieee802154 stack constructs a struct sockaddr_ieee802154 on the kernel stack without clearing these padding fields, and, depending on the addr_type, between four and ten bytes of uncleared kernel stack will be copied to userspace. We can't just insert two 'u16 __pad's in the right places and zero those before copying an address to userspace, as not all architectures insert this implicit padding -- from a quick test it seems that avr32, cris and m68k don't insert this padding, while every other architecture that I have cross compilers for does insert this padding. The easiest way to plug the leak is to just memset the whole struct sockaddr_ieee802154 before filling in the fields we want to fill in, and that's what this patch does. Cc: stable@vger.kernel.org Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-04cfg802154: fix rdev-ops naming convension and format specifiersVarka Bhadram1-5/+5
This patch make to use the same naming convention that mac802154 tracing follows and fixes the format specifier for extended addr. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-02mac802154: add trace functionality for driver opsVarka Bhadram4-15/+362
This patch adds trace events for driver operations. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-02ieee802154: 6lowpan: set ackreq when neededAlexander Aring1-2/+3
This patch sets the acknowledge request bit inside the 802.15.4 mac header when frame retries is 0 or above. The other frame retries value which is -1 indicates that the transmitter doesn't care about an acknowledge frame which will be ignored after transmitting if the node sends anyway an ack frame after receiving. This is currently unnecessary traffic if the max frame retries parameter is -1. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-31ieee802154: Fix EUI-64 station address validation.Lennert Buytenhek1-2/+2
Refuse to allow setting an EUI-64 group address as an interface address, as those are not valid station addresses. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-31Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller43-137/+165
Antonio Quartulli says: ==================== Included changes: - checkpatch fixes - code cleanup - debugfs component is now compiled only if DEBUG_FS is selected - update copyright years - disable by default not-so-user-safe features ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31netevent: remove automatic variable in register_netevent_notifier()Wang Long1-4/+1
Remove automatic variable 'err' in register_netevent_notifier() and return the result of atomic_notifier_chain_register() directly. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller6-11/+233
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) default CONFIG_NETFILTER_INGRESS to y for easier compile-testing of all options. 2) Allow to bind a table to net_device. This introduces the internal NFT_AF_NEEDS_DEV flag to perform a mandatory check for this binding. This is required by the next patch. 3) Add the 'netdev' table family, this new table allows you to create ingress filter basechains. This provides access to the existing nf_tables features from ingress. 4) Kill unused argument from compat_find_calc_{match,target} in ip_tables and ip6_tables, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30ipv6: drop unneeded gotoJulia Lawall1-7/+1
Delete jump to a label on the next line, when that label is not used elsewhere. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier l; @@ -if (...) goto l; -l: // </smpl> Also remove the unnecessary ret variable. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30Merge branch 'for-upstream' of ↵David S. Miller22-281/+476
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-05-28 Here's a set of patches intended for 4.2. The majority of the changes are on the 802.15.4 side of things rather than Bluetooth related: - All sorts of cleanups & fixes to ieee802154 and related drivers - Rework of tx power support in ieee802154 and its drivers - Support for setting ieee802154 tx power through nl802154 - New IDs for the btusb driver - Various cleanups & smaller fixes to btusb - New btrtl driver for Realtec devices - Fix suspend/resume for Realtek devices Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30tipc: unconditionally put sock refcnt when sock timer to be deleted is pendingYing Xue1-5/+2
As sock refcnt is taken when sock timer is started in sk_reset_timer(), the sock refcnt should be put when sock timer to be deleted is in pending state no matter what "probing_state" value of tipc sock is. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30bpf: allow BPF programs access skb->skb_iif and skb->dev->ifindex fieldsAlexei Starovoitov1-0/+18
classic BPF already exposes skb->dev->ifindex via SKF_AD_IFINDEX extension. Allow eBPF program to access it as well. Note that classic aborts execution of the program if 'skb->dev == NULL' (which is inconvenient for program writers), whereas eBPF returns zero in such case. Also expose the 'skb_iif' field, since programs triggered by redirected packet need to known the original interface index. Summary: __skb->ifindex -> skb->dev->ifindex __skb->ingress_ifindex -> skb->skb_iif Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MINSorin Dumitru1-4/+6
This is similar to b1cb59cf2efe(net: sysctl_net_core: check SNDBUF and RCVBUF for min length). I don't think too small values can cause crashes in the case of udp and tcp, but I've seen this set to too small values which triggered awful performance. It also makes the setting consistent across all the wmem/rmem sysctls. Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-29batman-adv: Use common declaration order in *_send_skb_(packet|unicast)Antonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2015-05-29batman-adv: iv_ogm_orig_update, remove unnecessary bracketsMarkus Pargmann1-1/+1
Remove these unnecessary brackets inside a condition. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_can_aggregate, code readabilityMarkus Pargmann1-49/+53
This patch tries to increase code readability by negating the first if block and rearranging some of the other conditional blocks. This way we save an indentation level, we also save some allocation that is not necessary for one of the conditions. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: checkpatch - spaces preferred around that '*'Marek Lindner2-2/+2
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: checkpatch - comparison to NULL could be rewrittenMarek Lindner1-1/+1
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: Use safer default config for optional featuresSven Eckelmann2-2/+2
The current default settings for optional features in batman-adv seems to be based around the idea that the user only compiles what he requires. They will automatically enabled when they are compiled in. For example the network coding part of batman-adv is by default disabled in the out-of-tree module but will be enabled when the code is compiled during the module build. But distributions like Debian just enable all features of the batman-adv kernel module and hope that more experimental features or features with possible negative effects have to be enabled using some runtime configuration interface. The network_coding feature can help in specific setups but also has drawbacks and is not disabled by default in the out-of-tree module. Disabling by default in the runtime config seems to be also quite sane. The bridge_loop_avoidance is the only feature which is disabled by default but may be necessary even in simple setups. Packet loops may even be created during the initial node setup when this is not enabled. This is different than STP on bridges because mesh is usually used on Adhoc WiFi. Having two nodes (by accident) in the same LAN segment and in the same mesh network is rather common in this situation. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_send_to_if, declare char* as constMarkus Pargmann1-1/+1
This string pointer is later assigned to a constant string, so it should be defined constant at the beginning. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_aggr_packet, bool return valueMarkus Pargmann1-2/+2
This function returns bool values, so it should be defined to return them instead of the whole int range. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_iface_enable, direct return valuesMarkus Pargmann1-6/+2
Directly return error values. No need to use a return variable. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: Makefile, Sort alphabeticallyMarkus Pargmann1-1/+1
The whole Makefile is sorted, just the multicast rule is not at the right position. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: tvlv realloc, move error handling into if blockMarkus Pargmann1-8/+8
Instead of hiding the normal function flow inside an if block, we should just put the error handling into the if block. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: debugfs, avoid compiling for !DEBUG_FSMarkus Pargmann3-9/+35
Normally the debugfs framework will return error pointer with -ENODEV for function calls when DEBUG_FS is not set. batman does not notice this error code and continues trying to create debugfs files and executes more code. We can avoid this code execution by disabling compiling debugfs.c when DEBUG_FS is not set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: Use only queued fragments when mergingSven Eckelmann1-8/+5
The fragment queueing code now validates the total_size of each fragment, checks when enough fragments are queued to allow to merge them into a single packet and if the fragments have the correct size. Therefore, it is not required to have any other parameter for the merging function than a list of queued fragments. This change should avoid problems like in the past when the different skb from the list and the function parameter were mixed incorrectly. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: Check total_size when queueing fragmentsSven Eckelmann2-2/+7
The fragmentation code was replaced in 610bfc6bc99bc83680d190ebc69359a05fc7f605 ("batman-adv: Receive fragmented packets and merge") by an implementation which handles the queueing+merging of fragments based on their size and the total_size of the non-fragmented packet. This total_size is announced by each fragment. The new implementation doesn't check if the the total_size information of the packets inside one chain is consistent. This is consistency check is recommended to allow using any of the packets in the queue to decide whether all fragments of a packet are received or not. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: update copyright years for 2015Sven Eckelmann43-43/+43
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2015-05-28Merge branch 'master' of ↵David S. Miller3-30/+28
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2015-05-28 1) Remove xfrm_queue_purge as this is the same as skb_queue_purge. 2) Optimize policy and state walk. 3) Use a sane return code if afinfo registration fails. 4) Only check fori a acquire state if the state is not valid. 5) Remove a unnecessary NULL check before xfrm_pol_hold as it checks the input for NULL. 6) Return directly if the xfrm hold queue is empty, avoid to take a lock as it is nothing to do in this case. 7) Optimize the inexact policy search and allow for matching of policies with priority ~0U. All from Li RongQing. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-27tcp/dccp: warn user for preferred ip_local_port_rangeEric Dumazet1-0/+6
After commit 07f4c90062f8f ("tcp/dccp: try to not exhaust ip_local_port_range in connect()") it is advised to have an even number of ports described in /proc/sys/net/ipv4/ip_local_port_range This means start/end values should have a different parity. Let's warn sysadmins of this, so that they can update their settings if they want to. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-18 13:41:45 +0000