summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2020-11-27net/x25: remove x25_kill_by_device()Martin Schiller1-16/+0
Remove obsolete function x25_kill_by_device(). It's not used any more. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/x25: fix restart request/confirm handlingMartin Schiller1-8/+33
We have to take the actual link state into account to handle restart requests/confirms well. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/lapb: fix t1 timer handling for LAPB_STATE_0Martin Schiller1-2/+9
1. DTE interface changes immediately to LAPB_STATE_1 and start sending SABM(E). 2. DCE interface sends N2-times DM and changes to LAPB_STATE_1 afterwards if there is no response in the meantime. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/lapb: support netdev eventsMartin Schiller1-1/+81
This patch allows layer2 (LAPB) to react to netdev events itself and avoids the detour via layer3 (X.25). 1. Establish layer2 on NETDEV_UP events, if the carrier is already up. 2. Call lapb_disconnect_request() on NETDEV_GOING_DOWN events to signal the peer that the connection will go down. (Only when the carrier is up.) 3. When a NETDEV_DOWN event occur, clear all queues, enter state LAPB_STATE_0 and stop all timers. 4. The NETDEV_CHANGE event makes it possible to handle carrier loss and detection. In case of Carrier Loss, clear all queues, enter state LAPB_STATE_0 and stop all timers. In case of Carrier Detection, we start timer t1 on a DCE interface, and on a DTE interface we change to state LAPB_STATE_1 and start sending SABM(E). Signed-off-by: Martin Schiller <ms@dev.tdt.de> Acked-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/x25: handle additional netdev eventsMartin Schiller3-12/+19
1. Add / remove x25_link_device by NETDEV_REGISTER/UNREGISTER and also by NETDEV_POST_TYPE_CHANGE/NETDEV_PRE_TYPE_CHANGE. This change is needed so that the x25_neigh struct for an interface is already created when it shows up and is kept independently if the interface goes UP or DOWN. This is used in an upcomming commit, where x25 params of an neighbour will get configurable through ioctls. 2. NETDEV_CHANGE event makes it possible to handle carrier loss and detection. If carrier is lost, clean up everything related to this neighbour by calling x25_link_terminated(). 3. Also call x25_link_terminated() for NETDEV_DOWN events and remove the call to x25_clear_forward_by_dev() in x25_route_device_down(), as this is already called by x25_kill_by_neigh() which gets called by x25_link_terminated(). 4. Do nothing for NETDEV_UP and NETDEV_GOING_DOWN events, as these will be handled in layer 2 (LAPB) and layer3 (X.25) will be informed by layer2 when layer2 link is established and layer3 link should be initiated. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/sched: sch_frag: add generic packet fragment support.wenxu5-1/+171
Currently kernel tc subsystem can do conntrack in cat_ct. But when several fragment packets go through the act_ct, function tcf_ct_handle_fragments will defrag the packets to a big one. But the last action will redirect mirred to a device which maybe lead the reassembly big packet over the mtu of target device. This patch add support for a xmit hook to mirred, that gets executed before xmiting the packet. Then, when act_ct gets loaded, it configs that hook. The frag xmit hook maybe reused by other modules. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Cong Wang <cong.wang@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/sched: act_mirred: refactor the handle of xmitwenxu1-6/+15
This one is prepare for the next patch. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/sched: fix miss init the mru in qdisc_skb_cbwenxu1-0/+2
The mru in the qdisc_skb_cb should be init as 0. Only defrag packets in the act_ct will set the value. Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/tls: add CHACHA20-POLY1305 configurationVadim Fedorenko2-0/+19
Add ChaCha-Poly specific configuration code. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/tls: add CHACHA20-POLY1305 specific behaviorVadim Fedorenko1-2/+4
RFC 7905 defines special behavior for ChaCha-Poly TLS sessions. The differences are in the calculation of nonce and the absence of explicit IV. This behavior is like TLSv1.3 partly. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/tls: make inline helpers protocol-awareVadim Fedorenko3-14/+13
Inline functions defined in tls.h have a lot of AES-specific constants. Remove these constants and change argument to struct tls_prot_info to have an access to cipher type in later patches Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25net: Use lockdep_assert_in_softirq() in napi_consume_skb()Yunsheng Lin1-0/+2
Use napi_consume_skb() to assert the case when it is not called in a atomic softirq context. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25mptcp: be careful on MPTCP-level ack.Paolo Abeni1-18/+49
We can enter the main mptcp_recvmsg() loop even when no subflows are connected. As note by Eric, that would result in a divide by zero oops on ack generation. Address the issue by checking the subflow status before sending the ack. Additionally protect mptcp_recvmsg() against invocation with weird socket states. v1 -> v2: - removed unneeded inline keyword - Jakub Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/5370c0ae03449239e3d1674ddcfb090cf6f20abe.1606253206.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25bridge: mrp: Implement LC mode for MRPHoratiu Vultur1-3/+15
Extend MRP to support LC mode(link check) for the interconnect port. This applies only to the interconnect ring. Opposite to RC mode(ring check) the LC mode is using CFM frames to detect when the link goes up or down and based on that the userspace will need to react. One advantage of the LC mode over RC mode is that there will be fewer frames in the normal rings. Because RC mode generates InTest on all ports while LC mode sends CFM frame only on the interconnect port. All 4 nodes part of the interconnect ring needs to have the same mode. And it is not possible to have running LC and RC mode at the same time on a node. Whenever the MIM starts it needs to detect the status of the other 3 nodes in the interconnect ring so it would send a frame called InLinkStatus, on which the clients needs to reply with their link status. This patch adds InLinkStatus frame type and extends existing rules on how to forward this frame. Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20201124082525.273820-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25net: sched: alias action flags with TCA_ACT_ prefixVlad Buslov1-5/+5
Currently both filter and action flags use same "TCA_" prefix which makes them hard to distinguish to code and confusing for users. Create aliases for existing action flags constants with "TCA_ACT_" prefix. Signed-off-by: Vlad Buslov <vlad@buslov.dev> Link: https://lore.kernel.org/r/20201124164054.893168-1-vlad@buslov.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25mptcp: put reference in mptcp timeout timerFlorian Westphal1-0/+1
On close this timer might be scheduled. mptcp uses sk_reset_timer for this, so the a reference on the mptcp socket is taken. This causes a refcount leak which can for example be reproduced with 'mp_join_server_v4.pkt' from the mptcp-packetdrill repo. The leak has nothing to do with join requests, v1_mp_capable_bind_no_cs.pkt works too when replacing the last ack mpcapable to v1 instead of v0. unreferenced object 0xffff888109bba040 (size 2744): comm "packetdrill", [..] backtrace: [..] sk_prot_alloc.isra.0+0x2b/0xc0 [..] sk_clone_lock+0x2f/0x740 [..] mptcp_sk_clone+0x33/0x1a0 [..] subflow_syn_recv_sock+0x2b1/0x690 [..] Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Cc: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20201124162446.11448-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24net: warn if gso_type isn't set for a GSO SKBHeiner Kallweit1-0/+5
In bug report [0] a warning in r8169 driver was reported that was caused by an invalid GSO SKB (gso_type was 0). See [1] for a discussion about this issue. Still the origin of the invalid GSO SKB isn't clear. It shouldn't be a network drivers task to check for invalid GSO SKB's. Also, even if issue [0] can be fixed, we can't be sure that a similar issue doesn't pop up again at another place. Therefore let gso_features_check() check for such invalid GSO SKB's. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209423 [1] https://www.spinics.net/lists/netdev/msg690794.html Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/97c78d21-7f0b-d843-df17-3589f224d2cf@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24devlink: Add blackhole_nexthop trapIdo Schimmel1-0/+1
Add a packet trap to report packets that were dropped due to a blackhole nexthop. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24Merge tag 'rxrpc-next-20201123' of ↵Jakub Kicinski13-797/+518
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Prelude to gssapi support Here are some patches that do some reorganisation of the security class handling in rxrpc to allow implementation of the RxGK security class that will allow AF_RXRPC to use GSSAPI-negotiated tokens and better crypto. The RxGK security class is not included in this patchset. It does the following things: (1) Add a keyrings patch to provide the original key description, as provided to add_key(), to the payload preparser so that it can interpret the content on that basis. Unfortunately, the rxrpc_s key type wasn't written to interpret its payload as anything other than a string of bytes comprising a key, but for RxGK, more information is required as multiple Kerberos enctypes are supported. (2) Remove the rxk5 security class key parsing. The rxk5 class never got rolled out in OpenAFS and got replaced with rxgk. (3) Support the creation of rxrpc keys with multiple tokens of different types. If some types are not supported, the ENOPKG error is suppressed if at least one other token's type is supported. (4) Punt the handling of server keys (rxrpc_s type) to the appropriate security class. (5) Organise the security bits in the rxrpc_connection struct into a union to make it easier to override for other classes. (6) Move some bits from core code into rxkad that won't be appropriate to rxgk. * tag 'rxrpc-next-20201123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: rxrpc: Ask the security class how much space to allow in a packet rxrpc: rxkad: Don't use pskb_pull() to advance through the response packet rxrpc: Organise connection security to use a union rxrpc: Don't reserve security header in Tx DATA skbuff rxrpc: Merge prime_packet_security into init_connection_security rxrpc: Fix example key name in a comment rxrpc: Ignore unknown tokens in key payload unless no known tokens rxrpc: Make the parsing of xdr payloads more coherent rxrpc: Allow security classes to give more info on server keys rxrpc: Don't leak the service-side session key to userspace rxrpc: Hand server key parsing off to the security class rxrpc: Split the server key type (rxrpc_s) into its own file rxrpc: Don't retain the server key in the connection rxrpc: Support keys with multiple authentication tokens rxrpc: List the held token types in the key description in /proc/keys rxrpc: Remove the rxk5 security class as it's now defunct keys: Provide the original description to the key preparser ==================== Link: https://lore.kernel.org/r/160616220405.830164.2239716599743995145.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23sctp: Fix some typoChristophe JAILLET1-2/+2
s/tranport/transport/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201122180704.1366636-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23net: don't include ethtool.h from netdevice.hJakub Kicinski4-0/+4
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23net: dsa: tag_hellcreek: Cleanup includesKurt Kanzenbach1-3/+1
Remove unused and add needed includes. No functional change. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23rxrpc: Ask the security class how much space to allow in a packetDavid Howells5-40/+82
Ask the security class how much header and trailer space to allow for when allocating a packet, given how much data is remaining. This will allow the rxgk security class to stick both a trailer in as well as a header as appropriate in the future. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: rxkad: Don't use pskb_pull() to advance through the response packetDavid Howells1-3/+1
In the rxkad security class, don't use pskb_pull() to advance through the contents of the response packet. There's no point, especially as the next and last access to the skbuff still has to allow for the wire header in the offset (which we didn't advance over). Better to just add the displacement to the next offset. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Organise connection security to use a unionDavid Howells2-23/+28
Organise the security information in the rxrpc_connection struct to use a union to allow for different data for different security classes. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Don't reserve security header in Tx DATA skbuffDavid Howells4-27/+14
Insert the security header into the skbuff representing a DATA packet to be transmitted rather than using skb_reserve() when the packet is allocated. This makes it easier to apply crypto that spans the security header and the data, particularly in the upcoming RxGK class where we have a common encrypt-and-checksum function that is used in a number of circumstances. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Merge prime_packet_security into init_connection_securityDavid Howells5-23/+15
Merge the ->prime_packet_security() into the ->init_connection_security() hook as they're always called together. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Fix example key name in a commentDavid Howells1-1/+1
Fix an example of an rxrpc key name in a comment. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Ignore unknown tokens in key payload unless no known tokensDavid Howells1-10/+21
When parsing a payload for an rxrpc-type key, ignore any tokens that are not of a known type and don't give an error for them - unless there are no tokens of a known type. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Make the parsing of xdr payloads more coherentDavid Howells1-10/+11
Make the parsing of xdr-encoded payloads, as passed to add_key, more coherent. Shuttling back and forth between various variables was a bit hard to follow. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Allow security classes to give more info on server keysDavid Howells2-0/+7
Allow a security class to give more information on an rxrpc_s-type key when it is viewed in /proc/keys. This will allow the upcoming RxGK security class to show the enctype name here. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Don't leak the service-side session key to userspaceDavid Howells1-2/+6
Don't let someone reading a service-side rxrpc-type key get access to the session key that was exchanged with the client. The server application will, at some point, need to be able to read the information in the ticket, but this probably shouldn't include the key material. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Hand server key parsing off to the security classDavid Howells4-30/+86
Hand responsibility for parsing a server key off to the security class. We can determine which class from the description. This is necessary as rxgk server keys have different lookup requirements and different content requirements (dependent on crypto type) to those of rxkad server keys. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Split the server key type (rxrpc_s) into its own fileDavid Howells4-127/+149
Split the server private key type (rxrpc_s) out into its own file rather than mingling it with the authentication/client key type (rxrpc) since they don't really bear any relation. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Don't retain the server key in the connectionDavid Howells7-67/+100
Don't retain a pointer to the server key in the connection, but rather get it on demand when the server has to deal with a response packet. This is necessary to implement RxGK (GSSAPI-mediated transport class), where we can't know which key we'll need until we've challenged the client and got back the response. This also means that we don't need to do a key search in the accept path in softirq mode. Also, whilst we're at it, allow the security class to ask for a kvno and encoding-type variant of a server key as RxGK needs different keys for different encoding types. Keys of this type have an extra bit in the description: "<service-id>:<security-index>:<kvno>:<enctype>" Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Support keys with multiple authentication tokensDavid Howells5-13/+17
rxrpc-type keys can have multiple tokens attached for different security classes. Currently, rxrpc always picks the first one, whether or not the security class it indicates is supported. Add preliminary support for choosing which security class will be used (this will need to be directed from a higher layer) and go through the tokens to find one that's supported. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: List the held token types in the key description in /proc/keysDavid Howells1-1/+28
When viewing an rxrpc-type key through /proc/keys, display a list of held token types. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-23rxrpc: Remove the rxk5 security class as it's now defunctDavid Howells1-468/+0
Remove the rxrpc rxk5 security class as it's now defunct and nothing uses it anymore. Signed-off-by: David Howells <dhowells@redhat.com>
2020-11-21Merge tag 'linux-can-next-for-5.11-20201120' of ↵Jakub Kicinski3-12/+74
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2020-11-20 The first patch is by Yegor Yefremov and he improves the j1939 documentaton by adding tables for the CAN identifier and its fields. Then there are 8 patches by Oliver Hartkopp targeting the CAN driver infrastructure and drivers. These add support for optional DLC element to the Classical CAN frame structure. See patch ea7800565a12 ("can: add optional DLC element to Classical CAN frame structure") for details. Oliver's last patch adds len8_dlc support to several drivers. Stefan Mätje provides a patch to add len8_dlc support to the esd_usb2 driver. The next patch is by Oliver Hartkopp, too and adds support for modification of Classical CAN DLCs to CAN GW sockets. The next 3 patches target the nxp,flexcan DT bindings. One patch by my adds the missing uint32 reference to the clock-frequency property. Joakim Zhang's patches fix the fsl,clk-source property and add the IMX_SC_R_CAN() macro to the imx firmware header file, which will be used in the flexcan driver later. Another patch by Joakim Zhang prepares the flexcan driver for SCU based stop-mode, by giving the existing, GPR based stop-mode, a _GPR postfix. The next 5 patches are by me, target the flexcan driver, and clean up the .ndo_open and .ndo_stop callbacks. These patches try to fix a sporadically hanging flexcan_close() during simultanious ifdown, sending of CAN messages and probably open CAN bus. I was never able to reproduce, but these seem to fix the problem at the reporting user. As these changes are rather big, I'd like to mainline them via net-next/master. The next patches are by Jimmy Assarsson and Christer Beskow, they add support for new USB devices to the existing kvaser_usb driver. The last patch is by Kaixu Xia and simplifies the return in the mcp251xfd_chip_softreset() function in the mcp251xfd driver. * tag 'linux-can-next-for-5.11-20201120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (25 commits) can: mcp251xfd: remove useless code in mcp251xfd_chip_softreset can: kvaser_usb: Add new Kvaser hydra devices can: kvaser_usb: kvaser_usb_hydra: Add support for new device variant can: kvaser_usb: Add new Kvaser Leaf v2 devices can: kvaser_usb: Add USB_{LEAF,HYDRA}_PRODUCT_ID_END defines can: flexcan: flexcan_close(): change order if commands to properly shut down the controller can: flexcan: flexcan_open(): completely initialize controller before requesting IRQ can: flexcan: flexcan_rx_offload_setup(): factor out mailbox and rx-offload setup into separate function can: flexcan: move enabling/disabling of interrupts from flexcan_chip_{start,stop}() to callers can: flexcan: factor out enabling and disabling of interrupts into separate function can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR dt-bindings: firmware: add IMX_SC_R_CAN(x) macro for CAN dt-bindings: can: fsl,flexcan: fix fsl,clk-source property dt-bindings: can: fsl,flexcan: add uint32 reference to clock-frequency property can: gw: support modification of Classical CAN DLCs can: drivers: add len8_dlc support for esd_usb2 CAN adapter can: drivers: add len8_dlc support for various CAN adapters can: drivers: introduce helpers to access Classical CAN DLC values can: update documentation for DLC usage in Classical CAN can: rename CAN FD related can_len2dlc and can_dlc2len helpers ... ==================== Link: https://lore.kernel.org/r/20201120133318.3428231-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21net: bridge: switch to net core statistics counters handlingHeiner Kallweit3-28/+10
Use netdev->tstats instead of a member of net_bridge for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/9bad2be2-fd84-7c6e-912f-cee433787018@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: refine MPTCP-level ack schedulingPaolo Abeni4-57/+61
Send timely MPTCP-level ack is somewhat difficult when the insertion into the msk receive level is performed by the worker. It needs TCP-level dup-ack to notify the MPTCP-level ack_seq increase, as both the TCP-level ack seq and the rcv window are unchanged. We can actually avoid processing incoming data with the worker, and let the subflow or recevmsg() send ack as needed. When recvmsg() moves the skbs inside the msk receive queue, the msk space is still unchanged, so tcp_cleanup_rbuf() could end-up skipping TCP-level ack generation. Anyway, when __mptcp_move_skbs() is invoked, a known amount of bytes is going to be consumed soon: we update rcv wnd computation taking them in account. Additionally we need to explicitly trigger tcp_cleanup_rbuf() when recvmsg() consumes a significant amount of the receive buffer. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: track window announced to peerFlorian Westphal4-10/+36
OoO handling attempts to detect when packet is out-of-window by testing current ack sequence and remaining space vs. sequence number. This doesn't work reliably. Store the highest allowed sequence number that we've announced and use it to detect oow packets. Do this when mptcp options get written to the packet (wire format). For this to work we need to move the write_options call until after stack selected a new tcp window. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: send out dedicated ADD_ADDR packetGeliang Tang5-6/+80
When ADD_ADDR suboption includes an IPv6 address, the size is 28 octets. It will not fit when other MPTCP suboptions are included in this packet, e.g. DSS. So here we send out an ADD_ADDR dedicated packet to carry only ADD_ADDR suboption, no other MPTCP suboptions. In mptcp_pm_announce_addr, we check whether this is an IPv6 ADD_ADDR. If it is, we set the flag MPTCP_ADD_ADDR_IPV6 to true. Then we call mptcp_pm_nl_add_addr_send_ack to sent out a new pure ACK packet. In mptcp_established_options_add_addr, we check whether this is a pure ACK packet for ADD_ADDR. If it is, we drop all other MPTCP suboptions in this packet, only put ADD_ADDR suboption in it. Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: change add_addr_signal typeGeliang Tang2-9/+21
This patch changed the 'add_addr_signal' type from bool to char, so that we could encode the addr type there. Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: keep unaccepted MPC subflow into join listPaolo Abeni3-21/+22
This will simplify all operation dealing with subflows before accept time (e.g. data fin processing, add_addr). The join list is already flushed by mptcp_stream_accept() before returning the newly created msk to the user space. This also fixes an potential bug present into the old code: conn_list was manipulated without helding the msk lock in mptcp_stream_accept(). Tested-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: skip to next candidate if subflow has unacked dataFlorian Westphal1-1/+4
In case a subflow path is blocked, MPTCP-level retransmit may not take place anymore because such subflow is likely to have unacked data left in its write queue. Ignore subflows that have experienced loss and test next candidate. Fixes: 3b1d6210a95773691 ("mptcp: implement and use MPTCP-level retransmission") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: fix state tracking for fallback socketPaolo Abeni1-5/+13
We need to cope with some more state transition for fallback sockets, or could still end-up moving to TCP_CLOSE too early and avoid spooling some pending data Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: drop WORKER_RUNNING status bitPaolo Abeni2-8/+1
Only mptcp_close() can actually cancel the workqueue, no need to add and use this flag. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20net: dsa: avoid potential use-after-free errorChristian Eggers1-3/+3
If dsa_switch_ops::port_txtstamp() returns false, clone will be freed immediately. Shouldn't store a pointer to freed memory. Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201119110906.25558-1-ceggers@arri.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20net: add annotation for sock_{lock,unlock}_fastPaolo Abeni1-1/+2
The static checker is fooled by the non-static locking scheme implemented by the mentioned helpers. Let's make its life easier adding some unconditional annotation so that the helpers are now interpreted as a plain spinlock from sparse. v1 -> v2: - add __releases() annotation to unlock_sock_fast() Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/6ed7ae627d8271fb7f20e0a9c6750fbba1ac2635.1605634911.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 04:40:11 +0000