summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2014-04-18net: sctp: cache auth_enable per endpointVlad Yasevich6-59/+89
Currently, it is possible to create an SCTP socket, then switch auth_enable via sysctl setting to 1 and crash the system on connect: Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.1-mipsgit-20140415 #1 task: ffffffff8056ce80 ti: ffffffff8055c000 task.ti: ffffffff8055c000 [...] Call Trace: [<ffffffff8043c4e8>] sctp_auth_asoc_set_default_hmac+0x68/0x80 [<ffffffff8042b300>] sctp_process_init+0x5e0/0x8a4 [<ffffffff8042188c>] sctp_sf_do_5_1B_init+0x234/0x34c [<ffffffff804228c8>] sctp_do_sm+0xb4/0x1e8 [<ffffffff80425a08>] sctp_endpoint_bh_rcv+0x1c4/0x214 [<ffffffff8043af68>] sctp_rcv+0x588/0x630 [<ffffffff8043e8e8>] sctp6_rcv+0x10/0x24 [<ffffffff803acb50>] ip6_input+0x2c0/0x440 [<ffffffff8030fc00>] __netif_receive_skb_core+0x4a8/0x564 [<ffffffff80310650>] process_backlog+0xb4/0x18c [<ffffffff80313cbc>] net_rx_action+0x12c/0x210 [<ffffffff80034254>] __do_softirq+0x17c/0x2ac [<ffffffff800345e0>] irq_exit+0x54/0xb0 [<ffffffff800075a4>] ret_from_irq+0x0/0x4 [<ffffffff800090ec>] rm7k_wait_irqoff+0x24/0x48 [<ffffffff8005e388>] cpu_startup_entry+0xc0/0x148 [<ffffffff805a88b0>] start_kernel+0x37c/0x398 Code: dd0900b8 000330f8 0126302d <dcc60000> 50c0fff1 0047182a a48306a0 03e00008 00000000 ---[ end trace b530b0551467f2fd ]--- Kernel panic - not syncing: Fatal exception in interrupt What happens while auth_enable=0 in that case is, that ep->auth_hmacs is initialized to NULL in sctp_auth_init_hmacs() when endpoint is being created. After that point, if an admin switches over to auth_enable=1, the machine can crash due to NULL pointer dereference during reception of an INIT chunk. When we enter sctp_process_init() via sctp_sf_do_5_1B_init() in order to respond to an INIT chunk, the INIT verification succeeds and while we walk and process all INIT params via sctp_process_param() we find that net->sctp.auth_enable is set, therefore do not fall through, but invoke sctp_auth_asoc_set_default_hmac() instead, and thus, dereference what we have set to NULL during endpoint initialization phase. The fix is to make auth_enable immutable by caching its value during endpoint initialization, so that its original value is being carried along until destruction. The bug seems to originate from the very first days. Fix in joint work with Daniel Borkmann. Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18Merge branch 'for-davem' of ↵David S. Miller4-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-04-17 Please pull this batch of fixes intended for the 3.15 stream... For the mac80211 bits, Johannes says: "We have a fix from Chun-Yeow to not look at management frame bitrates that are typically really low, two fixes from Felix for AP_VLAN interfaces, a fix from Ido to disable SMPS settings when a monitor interface is enabled, a radar detection fix from Michał and a fix from myself for a very old remain-on-channel bug." For the iwlwifi bits, Emmanuel says: "I have new device IDs and a new firmware API. These are the trivial ones. The less trivial ones are Johannes's fix that delays the enablement of an interrupt coalescing hardware until after association - this fixes a few connection problems seen in the field. Eyal has a bunch of rate control fixes. I decided to add these for 3.15 because they fix some disconnection and packet loss scenarios which were reported by the field. I also have a fix for a memory leak that happens only with a very new NIC." Along with those... Amitkumar Karwar fixes a couple of problems relating to driver/firmware interactions in mwifiex. Christian Engelmayer avoids a couple of potential memory leaks in the new rsi driver. Eliad Peller provides a wl18xx mailbox alignment fix for problems when using new firmware. Frederic Danis adds a couple of missing debugging strings to the cw1200 driver. Geert Uytterhoeven adds a variable initialization inside of the rsi driver. Luciano Coelho patches the wlcore code to ignore dummy packet events in PLT mode in order to work around a firmware bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18vlan: Fix lockdep warning when vlan dev handle notificationdingtianhong2-5/+42
When I open the LOCKDEP config and run these steps: modprobe 8021q vconfig add eth2 20 vconfig add eth2.20 30 ifconfig eth2 xx.xx.xx.xx then the Call Trace happened: [32524.386288] ============================================= [32524.386293] [ INFO: possible recursive locking detected ] [32524.386298] 3.14.0-rc2-0.7-default+ #35 Tainted: G O [32524.386302] --------------------------------------------- [32524.386306] ifconfig/3103 is trying to acquire lock: [32524.386310] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386326] [32524.386326] but task is already holding lock: [32524.386330] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386341] [32524.386341] other info that might help us debug this: [32524.386345] Possible unsafe locking scenario: [32524.386345] [32524.386350] CPU0 [32524.386352] ---- [32524.386354] lock(&vlan_netdev_addr_lock_key/1); [32524.386359] lock(&vlan_netdev_addr_lock_key/1); [32524.386364] [32524.386364] *** DEADLOCK *** [32524.386364] [32524.386368] May be due to missing lock nesting notation [32524.386368] [32524.386373] 2 locks held by ifconfig/3103: [32524.386376] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81431d42>] rtnl_lock+0x12/0x20 [32524.386387] #1: (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386398] [32524.386398] stack backtrace: [32524.386403] CPU: 1 PID: 3103 Comm: ifconfig Tainted: G O 3.14.0-rc2-0.7-default+ #35 [32524.386409] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [32524.386414] ffffffff81ffae40 ffff8800d9625ae8 ffffffff814f68a2 ffff8800d9625bc8 [32524.386421] ffffffff810a35fb ffff8800d8a8d9d0 00000000d9625b28 ffff8800d8a8e5d0 [32524.386428] 000003cc00000000 0000000000000002 ffff8800d8a8e5f8 0000000000000000 [32524.386435] Call Trace: [32524.386441] [<ffffffff814f68a2>] dump_stack+0x6a/0x78 [32524.386448] [<ffffffff810a35fb>] __lock_acquire+0x7ab/0x1940 [32524.386454] [<ffffffff810a323a>] ? __lock_acquire+0x3ea/0x1940 [32524.386459] [<ffffffff810a4874>] lock_acquire+0xe4/0x110 [32524.386464] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386471] [<ffffffff814fc07a>] _raw_spin_lock_nested+0x2a/0x40 [32524.386476] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386481] [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386489] [<ffffffffa0500cab>] vlan_dev_set_rx_mode+0x2b/0x50 [8021q] [32524.386495] [<ffffffff8141addf>] __dev_set_rx_mode+0x5f/0xb0 [32524.386500] [<ffffffff8141af8b>] dev_set_rx_mode+0x2b/0x40 [32524.386506] [<ffffffff8141b3cf>] __dev_open+0xef/0x150 [32524.386511] [<ffffffff8141b177>] __dev_change_flags+0xa7/0x190 [32524.386516] [<ffffffff8141b292>] dev_change_flags+0x32/0x80 [32524.386524] [<ffffffff8149ca56>] devinet_ioctl+0x7d6/0x830 [32524.386532] [<ffffffff81437b0b>] ? dev_ioctl+0x34b/0x660 [32524.386540] [<ffffffff814a05b0>] inet_ioctl+0x80/0xa0 [32524.386550] [<ffffffff8140199d>] sock_do_ioctl+0x2d/0x60 [32524.386558] [<ffffffff81401a52>] sock_ioctl+0x82/0x2a0 [32524.386568] [<ffffffff811a7123>] do_vfs_ioctl+0x93/0x590 [32524.386578] [<ffffffff811b2705>] ? rcu_read_lock_held+0x45/0x50 [32524.386586] [<ffffffff811b39e5>] ? __fget_light+0x105/0x110 [32524.386594] [<ffffffff811a76b1>] SyS_ioctl+0x91/0xb0 [32524.386604] [<ffffffff815057e2>] system_call_fastpath+0x16/0x1b ======================================================================== The reason is that all of the addr_lock_key for vlan dev have the same class, so if we change the status for vlan dev, the vlan dev and its real dev will hold the same class of addr_lock_key together, so the warning happened. we should distinguish the lock depth for vlan dev and its real dev. v1->v2: Convert the vlan_netdev_addr_lock_key to an array of eight elements, which could support to add 8 vlan id on a same vlan dev, I think it is enough for current scene, because a netdev's name is limited to IFNAMSIZ which could not hold 8 vlan id, and the vlan dev would not meet the same class key with its real dev. The new function vlan_dev_get_lockdep_subkey() will return the subkey and make the vlan dev could get a suitable class key. v2->v3: According David's suggestion, I use the subclass to distinguish the lock key for vlan dev and its real dev, but it make no sense, because the difference for subclass in the lock_class_key doesn't mean that the difference class for lock_key, so I use lock_depth to distinguish the different depth for every vlan dev, the same depth of the vlan dev could have the same lock_class_key, I import the MAX_LOCK_DEPTH from the include/linux/sched.h, I think it is enough here, the lockdep should never exceed that value. v3->v4: Add a huge array of locking keys will waste static kernel memory and is not a appropriate method, we could use _nested() variants to fix the problem, calculate the depth for every vlan dev, and use the depth as the subclass for addr_lock_key. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-17Merge branch 'master' of ↵John W. Linville4-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2014-04-16ip6_tunnel: use the right netns in ioctl handlerNicolas Dichtel1-4/+4
Because the netdevice may be in another netns than the i/o netns, we should use the i/o netns instead of dev_net(dev). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16sit: use the right netns in ioctl handlerNicolas Dichtel1-13/+4
Because the netdevice may be in another netns than the i/o netns, we should use the i/o netns instead of dev_net(dev). Note that netdev_priv(dev) cannot bu NULL, hence we can remove these useless checks. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16ip_tunnel: use the right netns in ioctl handlerNicolas Dichtel1-8/+7
Because the netdevice may be in another netns than the i/o netns, we should use the i/o netns instead of dev_net(dev). The variable 'tunnel' was used only to get 'itn', hence to simplify code I remove it and use 't' instead. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16net: use SYSCALL_DEFINEx for sys_recvJan Glauber1-2/+2
Make sys_recv a first class citizen by using the SYSCALL_DEFINEx macro. Besides being cleaner this will also generate meta data for the system call so tracing tools like ftrace or LTTng can resolve this system call. Signed-off-by: Jan Glauber <jan.glauber@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source()Cong Wang1-2/+1
In my special case, when a packet is redirected from veth0 to lo, its skb->dev->ifindex would be LOOPBACK_IFINDEX. Meanwhile we pass the hard-coded LOOPBACK_IFINDEX to fib_validate_source() in ip_route_input_slow(). This would cause the following check in fib_validate_source() fail: (dev->ifindex != oif || !IN_DEV_TX_REDIRECTS(idev)) when rp_filter is disabeld on loopback. As suggested by Julian, the caller should pass 0 here so that we will not end up by calling __fib_validate_source(). Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iifCong Wang5-7/+5
As suggested by Julian: Simply, flowi4_iif must not contain 0, it does not look logical to ignore all ip rules with specified iif. because in fib_rule_match() we do: if (rule->iifindex && (rule->iifindex != fl->flowi_iif)) goto out; flowi4_iif should be LOOPBACK_IFINDEX by default. We need to move LOOPBACK_IFINDEX to include/net/flow.h: 1) It is mostly used by flowi_iif 2) Fix the following compile error if we use it in flow.h by the patches latter: In file included from include/linux/netfilter.h:277:0, from include/net/netns/netfilter.h:5, from include/net/net_namespace.h:21, from include/linux/netdevice.h:43, from include/linux/icmpv6.h:12, from include/linux/ipv6.h:61, from include/net/ipv6.h:16, from include/linux/sunrpc/clnt.h:27, from include/linux/nfs_fs.h:30, from init/do_mounts.c:32: include/net/flow.h: In function ‘flowi4_init_output’: include/net/flow.h:84:32: error: ‘LOOPBACK_IFINDEX’ undeclared (first use in this function) Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ip6_gre: don't allow to remove the fb_tunnel_devNicolas Dichtel1-0/+10
It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but this is unsafe, the module always supposes that this device exists. For example, ip6gre_tunnel_lookup() may use it unconditionally. Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we let ip6gre_destroy_tunnels() do the job). Introduced by commit c12b395a4664 ("gre: Support GRE over IPv6"). CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ipv4: add a sock pointer to dst->output() path.Eric Dumazet13-33/+48
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ipv4: add a sock pointer to ip_queue_xmit()Eric Dumazet7-10/+10
ip_queue_xmit() assumes the skb it has to transmit is attached to an inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership") changed l2tp to not change skb ownership and thus broke this assumption. One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(), so that we do not assume skb->sk points to the socket used by l2tp tunnel. Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Reported-by: Zhan Jianyu <nasa4836@gmail.com> Tested-by: Zhan Jianyu <nasa4836@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller5-24/+5
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains three Netfilter fixes for your net tree, they are: * Fix missing generation sequence initialization which results in a splat if lockdep is enabled, it was introduced in the recent works to improve nf_conntrack scalability, from Andrey Vagin. * Don't flush the GRE keymap list in nf_conntrack when the pptp helper is disabled otherwise this crashes due to a double release, from Andrey Vagin. * Fix nf_tables cmp fast in big endian, from Patrick McHardy. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14net: Start with correct mac_len in skb_network_protocolVlad Yasevich1-1/+1
Sometimes, when the packet arrives at skb_mac_gso_segment() its skb->mac_len already accounts for some of the mac lenght headers in the packet. This seems to happen when forwarding through and OpenSSL tunnel. When we start looking for any vlan headers in skb_network_protocol() we seem to ignore any of the already known mac headers and start with an ETH_HLEN. This results in an incorrect offset, dropped TSO frames and general slowness of the connection. We can start counting from the known skb->mac_len and return at least that much if all mac level headers are known and accounted for. Fixes: 53d6471cef17262d3ad1c7ce8982a234244f68ec (net: Account for all vlan headers in skb_mac_gso_segment) CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Daniel Borkman <dborkman@redhat.com> Tested-by: Martin Filip <nexus+kernel@smoula.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the ↵Daniel Borkmann4-24/+74
receiver's buffer" This reverts commit ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") as it introduced a serious performance regression on SCTP over IPv4 and IPv6, though a not as dramatic on the latter. Measurements are on 10Gbit/s with ixgbe NICs. Current state: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.241.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 17:56:21 GMT Connecting to host 192.168.241.3, port 5201 Cookie: Lab200slot2.1397238981.812898.548918 [ 4] local 192.168.241.2 port 38616 connected to 192.168.241.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.09 sec 20.8 MBytes 161 Mbits/sec [ 4] 1.09-2.13 sec 10.8 MBytes 86.8 Mbits/sec [ 4] 2.13-3.15 sec 3.57 MBytes 29.5 Mbits/sec [ 4] 3.15-4.16 sec 4.33 MBytes 35.7 Mbits/sec [ 4] 4.16-6.21 sec 10.4 MBytes 42.7 Mbits/sec [ 4] 6.21-6.21 sec 0.00 Bytes 0.00 bits/sec [ 4] 6.21-7.35 sec 34.6 MBytes 253 Mbits/sec [ 4] 7.35-11.45 sec 22.0 MBytes 45.0 Mbits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-12.51 sec 16.0 MBytes 126 Mbits/sec [ 4] 12.51-13.59 sec 20.3 MBytes 158 Mbits/sec [ 4] 13.59-14.65 sec 13.4 MBytes 107 Mbits/sec [ 4] 14.65-16.79 sec 33.3 MBytes 130 Mbits/sec [ 4] 16.79-16.79 sec 0.00 Bytes 0.00 bits/sec [ 4] 16.79-17.82 sec 5.94 MBytes 48.7 Mbits/sec (etc) [root@Lab200slot2 ~]# iperf3 --sctp -6 -c 2001:db8:0:f101::1 -V -l 1400 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 19:08:41 GMT Connecting to host 2001:db8:0:f101::1, port 5201 Cookie: Lab200slot2.1397243321.714295.2b3f7c [ 4] local 2001:db8:0:f101::2 port 55804 connected to 2001:db8:0:f101::1 port 5201 Starting Test: protocol: SCTP, 1 streams, 1400 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 169 MBytes 1.42 Gbits/sec [ 4] 1.00-2.00 sec 201 MBytes 1.69 Gbits/sec [ 4] 2.00-3.00 sec 188 MBytes 1.58 Gbits/sec [ 4] 3.00-4.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 4.00-5.00 sec 165 MBytes 1.39 Gbits/sec [ 4] 5.00-6.00 sec 199 MBytes 1.67 Gbits/sec [ 4] 6.00-7.00 sec 163 MBytes 1.36 Gbits/sec [ 4] 7.00-8.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 8.00-9.00 sec 193 MBytes 1.62 Gbits/sec [ 4] 9.00-10.00 sec 196 MBytes 1.65 Gbits/sec [ 4] 10.00-11.00 sec 157 MBytes 1.31 Gbits/sec [ 4] 11.00-12.00 sec 175 MBytes 1.47 Gbits/sec [ 4] 12.00-13.00 sec 192 MBytes 1.61 Gbits/sec [ 4] 13.00-14.00 sec 199 MBytes 1.67 Gbits/sec (etc) After patch: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.240.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0+ #1 SMP Mon Apr 14 12:06:40 EDT 2014 x86_64 Time: Mon, 14 Apr 2014 16:40:48 GMT Connecting to host 192.168.240.3, port 5201 Cookie: Lab200slot2.1397493648.413274.65e131 [ 4] local 192.168.240.2 port 50548 connected to 192.168.240.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 1.00-2.00 sec 239 MBytes 2.01 Gbits/sec [ 4] 2.00-3.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 3.00-4.00 sec 239 MBytes 2.00 Gbits/sec [ 4] 4.00-5.00 sec 245 MBytes 2.05 Gbits/sec [ 4] 5.00-6.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 6.00-7.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 7.00-8.00 sec 239 MBytes 2.01 Gbits/sec With the reverted patch applied, the SCTP/IPv4 performance is back to normal on latest upstream for IPv4 and IPv6 and has same throughput as 3.4.2 test kernel, steady and interval reports are smooth again. Fixes: ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") Reported-by: Peter Butler <pbutler@sonusnet.com> Reported-by: Dongsheng Song <dongsheng.song@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Peter Butler <pbutler@sonusnet.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com> Cc: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_WDaniel Borkmann1-1/+0
While reviewing seccomp code, we found that BPF_S_ANC_SECCOMP_LD_W has been wrongly decoded by commit a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)") into the opcode BPF_LD|BPF_B|BPF_ABS although it should have been decoded as BPF_LD|BPF_W|BPF_ABS. In practice, this should not have much side-effect though, as such conversion is/was being done through prctl(2) PR_SET_SECCOMP. Reverse operation PR_GET_SECCOMP will only return the current seccomp mode, but not the filter itself. Since the transition to the new BPF infrastructure, it's also not used anymore, so we can simply remove this as it's unreachable. Fixes: a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14Merge branch 'for-john' of ↵John W. Linville4-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2014-04-14ipv6: Limit mtu to 65575 bytesEric Dumazet1-2/+3
Francois reported that setting big mtu on loopback device could prevent tcp sessions making progress. We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets. We must limit the IPv6 MTU to (65535 + 40) bytes in theory. Tested: ifconfig lo mtu 70000 netperf -H ::1 Before patch : Throughput : 0.05 Mbits After patch : Throughput : 35484 Mbits Reported-by: Francois WELLENREITER <f.wellenreiter@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14netfilter: nf_tables: fix nft_cmp_fast failure on big endian for size < 4Patrick McHardy2-3/+2
nft_cmp_fast is used for equality comparisions of size <= 4. For comparisions of size < 4 byte a mask is calculated that is applied to both the data from userspace (during initialization) and the register value (during runtime). Both values are stored using (in effect) memcpy to a memory area that is then interpreted as u32 by nft_cmp_fast. This works fine on little endian since smaller types have the same base address, however on big endian this is not true and the smaller types are interpreted as a big number with trailing zero bytes. The mask therefore must not include the lower bytes, but the higher bytes on big endian. Add a helper function that does a cpu_to_le32 to switch the bytes on big endian. Since we're dealing with a mask of just consequitive bits, this works out fine. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-14netfilter: nf_conntrack: initialize net.ct.generationAndrey Vagin1-0/+1
[ 251.920788] INFO: trying to register non-static key. [ 251.921386] the code is fine but needs lockdep annotation. [ 251.921386] turning off the locking correctness validator. [ 251.921386] CPU: 2 PID: 15715 Comm: socket_listen Not tainted 3.14.0+ #294 [ 251.921386] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 251.921386] 0000000000000000 000000009d18c210 ffff880075f039b8 ffffffff816b7ecd [ 251.921386] ffffffff822c3b10 ffff880075f039c8 ffffffff816b36f4 ffff880075f03aa0 [ 251.921386] ffffffff810c65ff ffffffff810c4a85 00000000fffffe01 ffffffffa0075172 [ 251.921386] Call Trace: [ 251.921386] [<ffffffff816b7ecd>] dump_stack+0x45/0x56 [ 251.921386] [<ffffffff816b36f4>] register_lock_class.part.24+0x38/0x3c [ 251.921386] [<ffffffff810c65ff>] __lock_acquire+0x168f/0x1b40 [ 251.921386] [<ffffffff810c4a85>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 251.921386] [<ffffffffa0075172>] ? nf_nat_setup_info+0x252/0x3a0 [nf_nat] [ 251.921386] [<ffffffff816c1215>] ? _raw_spin_unlock_bh+0x35/0x40 [ 251.921386] [<ffffffffa0075172>] ? nf_nat_setup_info+0x252/0x3a0 [nf_nat] [ 251.921386] [<ffffffff810c7272>] lock_acquire+0xa2/0x120 [ 251.921386] [<ffffffffa008ab90>] ? ipv4_confirm+0x90/0xf0 [nf_conntrack_ipv4] [ 251.921386] [<ffffffffa0055989>] __nf_conntrack_confirm+0x129/0x410 [nf_conntrack] [ 251.921386] [<ffffffffa008ab90>] ? ipv4_confirm+0x90/0xf0 [nf_conntrack_ipv4] [ 251.921386] [<ffffffffa008ab90>] ipv4_confirm+0x90/0xf0 [nf_conntrack_ipv4] [ 251.921386] [<ffffffff815e7b00>] ? ip_fragment+0x9f0/0x9f0 [ 251.921386] [<ffffffff815d8c5a>] nf_iterate+0xaa/0xc0 [ 251.921386] [<ffffffff815e7b00>] ? ip_fragment+0x9f0/0x9f0 [ 251.921386] [<ffffffff815d8d14>] nf_hook_slow+0xa4/0x190 [ 251.921386] [<ffffffff815e7b00>] ? ip_fragment+0x9f0/0x9f0 [ 251.921386] [<ffffffff815e98f2>] ip_output+0x92/0x100 [ 251.921386] [<ffffffff815e8df9>] ip_local_out+0x29/0x90 [ 251.921386] [<ffffffff815e9240>] ip_queue_xmit+0x170/0x4c0 [ 251.921386] [<ffffffff815e90d5>] ? ip_queue_xmit+0x5/0x4c0 [ 251.921386] [<ffffffff81601208>] tcp_transmit_skb+0x498/0x960 [ 251.921386] [<ffffffff81602d82>] tcp_connect+0x812/0x960 [ 251.921386] [<ffffffff810e3dc5>] ? ktime_get_real+0x25/0x70 [ 251.921386] [<ffffffff8159ea2a>] ? secure_tcp_sequence_number+0x6a/0xc0 [ 251.921386] [<ffffffff81606f57>] tcp_v4_connect+0x317/0x470 [ 251.921386] [<ffffffff8161f645>] __inet_stream_connect+0xb5/0x330 [ 251.921386] [<ffffffff8158dfc3>] ? lock_sock_nested+0x33/0xa0 [ 251.921386] [<ffffffff810c4b5d>] ? trace_hardirqs_on+0xd/0x10 [ 251.921386] [<ffffffff81078885>] ? __local_bh_enable_ip+0x75/0xe0 [ 251.921386] [<ffffffff8161f8f8>] inet_stream_connect+0x38/0x50 [ 251.921386] [<ffffffff8158b157>] SYSC_connect+0xe7/0x120 [ 251.921386] [<ffffffff810e3789>] ? current_kernel_time+0x69/0xd0 [ 251.921386] [<ffffffff810c4a85>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 251.921386] [<ffffffff810c4b5d>] ? trace_hardirqs_on+0xd/0x10 [ 251.921386] [<ffffffff8158c36e>] SyS_connect+0xe/0x10 [ 251.921386] [<ffffffff816caf69>] system_call_fastpath+0x16/0x1b [ 312.014104] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=60003 jiffies, g=42359, c=42358, q=333) [ 312.015097] INFO: Stall ended before state dump start Fixes: 93bb0ceb75be ("netfilter: conntrack: remove central spinlock nf_conntrack_lock") Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-13filter: prevent nla extensions to peek beyond the end of the messageMathias Krause1-1/+7
The BPF_S_ANC_NLATTR and BPF_S_ANC_NLATTR_NEST extensions fail to check for a minimal message length before testing the supplied offset to be within the bounds of the message. This allows the subtraction of the nla header to underflow and therefore -- as the data type is unsigned -- allowing far to big offset and length values for the search of the netlink attribute. The remainder calculation for the BPF_S_ANC_NLATTR_NEST extension is also wrong. It has the minuend and subtrahend mixed up, therefore calculates a huge length value, allowing to overrun the end of the message while looking for the netlink attribute. The following three BPF snippets will trigger the bugs when attached to a UNIX datagram socket and parsing a message with length 1, 2 or 3. ,-[ PoC for missing size check in BPF_S_ANC_NLATTR ]-- | ld #0x87654321 | ldx #42 | ld #nla | ret a `--- ,-[ PoC for the same bug in BPF_S_ANC_NLATTR_NEST ]-- | ld #0x87654321 | ldx #42 | ld #nlan | ret a `--- ,-[ PoC for wrong remainder calculation in BPF_S_ANC_NLATTR_NEST ]-- | ; (needs a fake netlink header at offset 0) | ld #0 | ldx #42 | ld #nlan | ret a `--- Fix the first issue by ensuring the message length fulfills the minimal size constrains of a nla header. Fix the second bug by getting the math for the remainder calculation right. Fixes: 4738c1db15 ("[SKFILTER]: Add SKF_ADF_NLATTR instruction") Fixes: d214c7537b ("filter: add SKF_AD_NLATTR_NEST to look for nested..") Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-13ipv4: return valid RTA_IIF on ip route getJulian Anastasov1-1/+1
Extend commit 13378cad02afc2adc6c0e07fca03903c7ada0b37 ("ipv4: Change rt->rt_iif encoding.") from 3.6 to return valid RTA_IIF on 'ip route get ... iif DEVICE' instead of rt_iif 0 which is displayed as 'iif *'. inet_iif is not appropriate to use because skb_iif is not set. Use the skb->dev->ifindex instead. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-13net: ipv4: current group_info should be put after using.Wang, Xiaoming1-4/+11
Plug a group_info refcount leak in ping_init. group_info is only needed during initialization and the code failed to release the reference on exit. While here move grabbing the reference to a place where it is actually needed. Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com> Signed-off-by: xiaoming wang <xiaoming.wang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds52-114/+119
Pull yet more networking updates from David Miller: 1) Various fixes to the new Redpine Signals wireless driver, from Fariya Fatima. 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from Dmitry Petukhov. 3) UFO and TSO packets differ in whether they include the protocol header in gso_size, account for that in skb_gso_transport_seglen(). From Florian Westphal. 4) If VLAN untagging fails, we double free the SKB in the bridging output path. From Toshiaki Makita. 5) Several call sites of sk->sk_data_ready() were referencing an SKB just added to the socket receive queue in order to calculate the second argument via skb->len. This is dangerous because the moment the skb is added to the receive queue it can be consumed in another context and freed up. It turns out also that none of the sk->sk_data_ready() implementations even care about this second argument. So just kill it off and thus fix all these use-after-free bugs as a side effect. 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti. 7) pktgen needs to do locking properly for LLTX devices, from Daniel Borkmann. 8) xen-netfront driver initializes TX array entries in RX loop :-) From Vincenzo Maffione. 9) After refactoring, some tunnel drivers allow a tunnel to be configured on top itself. Fix from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO net: ipv6: Fix oif in TCP SYN+ACK route lookup. drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts drivers: net: cpsw: discard all packets received when interface is down net: Fix use after free by removing length arg from sk_data_ready callbacks. Drivers: net: hyperv: Address UDP checksum issues Drivers: net: hyperv: Negotiate suitable ndis version for offload support Drivers: net: hyperv: Allocate memory for all possible per-pecket information bridge: Fix double free and memory leak around br_allowed_ingress bonding: Remove debug_fs files when module init fails i40evf: program RSS LUT correctly i40evf: remove open-coded skb_cow_head ixgb: remove open-coded skb_cow_head igbvf: remove open-coded skb_cow_head ...
2014-04-12vti: don't allow to add the same tunnel twiceNicolas Dichtel1-1/+1
Before the patch, it was possible to add two times the same tunnel: ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41 ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit b9959fd3b0fa ("vti: switch to new ip tunnel code"). CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-12gre: don't allow to add the same tunnel twiceNicolas Dichtel1-1/+1
Before the patch, it was possible to add two times the same tunnel: ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249 ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit c54419321455 ("GRE: Refactor GRE tunneling code."). CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-12pktgen: be friendly to LLTX devicesDaniel Borkmann1-2/+6
Similarly to commit 43279500deca ("packet: respect devices with LLTX flag in direct xmit"), we can basically apply the very same to pktgen. This will help testing against LLTX devices such as dummy driver (or others), which only have a single netdevice txq and would otherwise require locking their txq from pktgen side while e.g. in dummy case, we would not need any locking. Fix this by making use of HARD_TX_{UN,}LOCK API, so that NETIF_F_LLTX will be respected. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11Merge tag 'for-linus-3.15' of ↵Linus Torvalds4-72/+92
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p changes from Eric Van Hensbergen: "A bunch of updates and cleanup within the transport layer, particularly with a focus on RDMA" * tag 'for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9pnet_rdma: check token type before int conversion 9pnet: trans_fd : allocate struct p9_trans_fd and struct p9_conn together. 9pnet: p9_client->conn field is unused. Remove it. 9P: Get rid of REQ_STATUS_FLSH 9pnet_rdma: add cancelled() 9pnet_rdma: update request status during send 9P: Add cancelled() to the transport functions. net: Mark function as static in 9p/client.c 9P: Add memory barriers to protect request fields over cb/rpc threads handoff
2014-04-11net: ipv6: Fix oif in TCP SYN+ACK route lookup.Lorenzo Colitti1-1/+1
net-next commit 9c76a11, ipv6: tcp_ipv6 policy route issue, had a boolean logic error that caused incorrect behaviour for TCP SYN+ACK when oif-based rules are in use. Specifically: 1. If a SYN comes in from a global address, and sk_bound_dev_if is not set, the routing lookup has oif set to the interface the SYN came in on. Instead, it should have oif unset, because for global addresses, the incoming interface doesn't necessarily have any bearing on the interface the SYN+ACK is sent out on. 2. If a SYN comes in from a link-local address, and sk_bound_dev_if is set, the routing lookup has oif set to the interface the SYN came in on. Instead, it should have oif set to sk_bound_dev_if, because that's what the application requested. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller45-98/+90
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11bridge: Fix double free and memory leak around br_allowed_ingressToshiaki Makita2-4/+5
br_allowed_ingress() has two problems. 1. If br_allowed_ingress() is called by br_handle_frame_finish() and vlan_untag() in br_allowed_ingress() fails, skb will be freed by both vlan_untag() and br_handle_frame_finish(). 2. If br_allowed_ingress() is called by br_dev_xmit() and br_allowed_ingress() fails, the skb will not be freed. Fix these two problems by freeing the skb in br_allowed_ingress() if it fails. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11mac80211: exclude AP_VLAN interfaces from tx power calculationFelix Fietkau1-0/+2
Their power value is initialized to zero. This patch fixes an issue where the configured power drops to the minimum value when AP_VLAN interfaces are created/removed. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-11mac80211: suppress BSS info change notifications for AP_VLANFelix Fietkau1-1/+1
Fixes warnings on tx power changes Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-10net: core: don't account for udp header size when computing seglenFlorian Westphal1-5/+7
In case of tcp, gso_size contains the tcpmss. For UFO (udp fragmentation offloading) skbs, gso_size is the fragment payload size, i.e. we must not account for udp header size. Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet will be needlessly fragmented in the forward path, because we think its individual segments are too large for the outgoing link. Fixes: fe6cc55f3a9a053 ("net: ip, ipv6: handle gso skbs in forwarding path") Cc: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-09l2tp: take PMTU from tunnel UDP socketDmitry Petukhov1-2/+2
When l2tp driver tries to get PMTU for the tunnel destination, it uses the pointer to struct sock that represents PPPoX socket, while it should use the pointer that represents UDP socket of the tunnel. Signed-off-by: Dmitry Petukhov <dmgenp@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-09net: sctp: test if association is dead in sctp_wake_up_waitersDaniel Borkmann1-0/+6
In function sctp_wake_up_waiters(), we need to involve a test if the association is declared dead. If so, we don't have any reference to a possible sibling association anymore and need to invoke sctp_write_space() instead, and normally walk the socket's associations and notify them of new wmem space. The reason for special casing is that otherwise, we could run into the following issue when a sctp_primitive_SEND() call from sctp_sendmsg() fails, and tries to flush an association's outq, i.e. in the following way: sctp_association_free() `-> list_del(&asoc->asocs) <-- poisons list pointer asoc->base.dead = true sctp_outq_free(&asoc->outqueue) `-> __sctp_outq_teardown() `-> sctp_chunk_free() `-> consume_skb() `-> sctp_wfree() `-> sctp_wake_up_waiters() <-- dereferences poisoned pointers if asoc->ep->sndbuf_policy=0 Therefore, only walk the list in an 'optimized' way if we find that the current association is still active. We could also use list_del_init() in addition when we call sctp_association_free(), but as Vlad suggests, we want to trap such bugs and thus leave it poisoned as is. Why is it safe to resolve the issue by testing for asoc->base.dead? Parallel calls to sctp_sendmsg() are protected under socket lock, that is lock_sock()/release_sock(). Only within that path under lock held, we're setting skb/chunk owner via sctp_set_owner_w(). Eventually, chunks are freed directly by an association still under that lock. So when traversing association list on destruction time from sctp_wake_up_waiters() via sctp_wfree(), a different CPU can't be running sctp_wfree() while another one calls sctp_association_free() as both happens under the same lock. Therefore, this can also not race with setting/testing against asoc->base.dead as we are guaranteed for this to happen in order, under lock. Further, Vlad says: the times we check asoc->base.dead is when we've cached an association pointer for later processing. In between cache and processing, the association may have been freed and is simply still around due to reference counts. We check asoc->base.dead under a lock, so it should always be safe to check and not race against sctp_association_free(). Stress-testing seems fine now, too. Fixes: cd253f9f357d ("net: sctp: wake up all assocs if sndbuf policy is per socket") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-09mac80211: update last_tx_rate only for data frameChun-Yeow Yeoh1-0/+1
Rate controller in firmware may also return the Tx Rate used for management frame that is usually sent as lowest Tx Rate (1Mbps in 2.4GHz). So update the last_tx_rate only if it is data frame. This patch is tested with ath9k_htc. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: fix radar_enabled propagationMichal Kazior1-2/+2
If chandef had non-HT width it was possible for radar_enabled update to not be propagated properly through drv_config(). This happened because ieee80211_hw_conf_chan() would never see different local->hw.conf.chandef and local->_oper_chandef. This wasn't a problem with HT chandefs because _oper_chandef width is reset to non-HT in ieee80211_free_chanctx() making ieee80211_hw_conf_chan() to kick in. This problem led (at least) ath10k to not start CAC if prior CAC was cancelled and both CACs were requested for identical non-HT chandefs. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: Disable SMPS for the monitor interfaceIdo Yariv1-0/+7
All antennas should be operational when monitoring to maximize reception. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: fix software remain-on-channel implementationJohannes Berg1-0/+1
Jouni reported that when doing off-channel transmissions mixed with on-channel transmissions, the on-channel ones ended up on the off-channel in some cases. The reason for that is that during the refactoring of the off- channel code, I lost the part that stopped all activity and as a consequence the on-channel frames (including data frames) were no longer queued but would be transmitted on the temporary channel. Fix this by simply restoring the lost activity stop call. Cc: stable@vger.kernel.org Fixes: 2eb278e083549 ("mac80211: unify SW/offload remain-on-channel") Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-08Merge branch 'for-3.15' of git://linux-nfs.org/~bfields/linuxLinus Torvalds11-86/+119
Pull nfsd updates from Bruce Fields: "Highlights: - server-side nfs/rdma fixes from Jeff Layton and Tom Tucker - xdr fixes (a larger xdr rewrite has been posted but I decided it would be better to queue it up for 3.16). - miscellaneous fixes and cleanup from all over (thanks especially to Kinglong Mee)" * 'for-3.15' of git://linux-nfs.org/~bfields/linux: (36 commits) nfsd4: don't create unnecessary mask acl nfsd: revert v2 half of "nfsd: don't return high mode bits" nfsd4: fix memory leak in nfsd4_encode_fattr() nfsd: check passed socket's net matches NFSd superblock's one SUNRPC: Clear xpt_bc_xprt if xs_setup_bc_tcp failed NFSD/SUNRPC: Check rpc_xprt out of xs_setup_bc_tcp SUNRPC: New helper for creating client with rpc_xprt NFSD: Free backchannel xprt in bc_destroy NFSD: Clear wcc data between compound ops nfsd: Don't return NFS4ERR_STALE_STATEID for NFSv4.1+ nfsd4: fix nfs4err_resource in 4.1 case nfsd4: fix setclientid encode size nfsd4: remove redundant check from nfsd4_check_resp_size nfsd4: use more generous NFS4_ACL_MAX nfsd4: minor nfsd4_replay_cache_entry cleanup nfsd4: nfsd4_replay_cache_entry should be static nfsd4: update comments with obsolete function name rpc: Allow xdr_buf_subsegment to operate in-place NFSD: Using free_conn free connection SUNRPC: fix memory leak of peer addresses in XPRT ...
2014-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds17-48/+107
Pull more networking updates from David Miller: 1) If a VXLAN interface is created with no groups, we can crash on reception of packets. Fix from Mike Rapoport. 2) Missing includes in CPTS driver, from Alexei Starovoitov. 3) Fix string validations in isdnloop driver, from YOSHIFUJI Hideaki and Dan Carpenter. 4) Missing irq.h include in bnxw2x, enic, and qlcnic drivers. From Josh Boyer. 5) AF_PACKET transmit doesn't statistically count TX drops, from Daniel Borkmann. 6) Byte-Queue-Limit enabled drivers aren't handled properly in AF_PACKET transmit path, also from Daniel Borkmann. Same problem exists in pktgen, and Daniel fixed it there too. 7) Fix resource leaks in driver probe error paths of new sxgbe driver, from Francois Romieu. 8) Truesize of SKBs can gradually get more and more corrupted in NAPI packet recycling path, fix from Eric Dumazet. 9) Fix uniprocessor netfilter build, from Florian Westphal. In the longer term we should perhaps try to find a way for ARRAY_SIZE() to work even with zero sized array elements. 10) Fix crash in netfilter conntrack extensions due to mis-estimation of required extension space. From Andrey Vagin. 11) Since we commit table rule updates before trying to copy the counters back to userspace (it's the last action we perform), we really can't signal the user copy with an error as we are beyond the point from which we can unwind everything. This causes all kinds of use after free crashes and other mysterious behavior. From Thomas Graf. 12) Restore previous behvaior of div/mod by zero in BPF filter processing. From Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net: sctp: wake up all assocs if sndbuf policy is per socket isdnloop: several buffer overflows netdev: remove potentially harmful checks pktgen: fix xmit test for BQL enabled devices net/at91_ether: avoid NULL pointer dereference tipc: Let tipc_release() return 0 at86rf230: fix MAX_CSMA_RETRIES parameter mac802154: fix duplicate #include headers sxgbe: fix duplicate #include headers net: filter: be more defensive on div/mod by X==0 netfilter: Can't fail and free after table replacement xen-netback: Trivial format string fix net: bcmgenet: Remove unnecessary version.h inclusion net: smc911x: Remove unused local variable bonding: Inactive slaves should keep inactive flag's value netfilter: nf_tables: fix wrong format in request_module() netfilter: nf_tables: set names cannot be larger than 15 bytes netfilter: nf_conntrack: reserve two bytes for nf_ct_ext->len netfilter: Add {ipt,ip6t}_osf aliases for xt_osf netfilter: x_tables: allow to use cgroup match for LOCAL_IN nf hooks ...
2014-04-08Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull second set of s390 patches from Martin Schwidefsky: "The second part of Heikos uaccess rework, the page table walker for uaccess is now a thing of the past (yay!) The code change to fix the theoretical TLB flush problem allows us to add a TLB flush optimization for zEC12, this machine has new instructions that allow to do CPU local TLB flushes for single pages and for all pages of a specific address space. Plus the usual bug fixing and some more cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uaccess: rework uaccess code - fix locking issues s390/mm,tlb: optimize TLB flushing for zEC12 s390/mm,tlb: safeguard against speculative TLB creation s390/irq: Use defines for external interruption codes s390/irq: Add defines for external interruption codes s390/sclp: add timeout for queued requests kvm/s390: also set guest pages back to stable on kexec/kdump lcs: Add missing destroy_timer_on_stack() s390/tape: Add missing destroy_timer_on_stack() s390/tape: Use del_timer_sync() s390/3270: fix crash with multiple reset device requests s390/bitops,atomic: add missing memory barriers s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6
2014-04-08net: sctp: wake up all assocs if sndbuf policy is per socketDaniel Borkmann1-1/+35
SCTP charges chunks for wmem accounting via skb->truesize in sctp_set_owner_w(), and sctp_wfree() respectively as the reverse operation. If a sender runs out of wmem, it needs to wait via sctp_wait_for_sndbuf(), and gets woken up by a call to __sctp_write_space() mostly via sctp_wfree(). __sctp_write_space() is being called per association. Although we assign sk->sk_write_space() to sctp_write_space(), which is then being done per socket, it is only used if send space is increased per socket option (SO_SNDBUF), as SOCK_USE_WRITE_QUEUE is set and therefore not invoked in sock_wfree(). Commit 4c3a5bdae293 ("sctp: Don't charge for data in sndbuf again when transmitting packet") fixed an issue where in case sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. However, a still remaining issue is that if net.sctp.sndbuf_policy=0, that is accounting per socket, and one-to-many sockets are in use, the reclaimed write space from sctp_wfree() is 'unfairly' handed back on the server to the association that is the lucky one to be woken up again via __sctp_write_space(), while the remaining associations are never be woken up again (unless by a signal). The effect disappears with net.sctp.sndbuf_policy=1, that is wmem accounting per association, as it guarantees a fair share of wmem among associations. Therefore, if we have reclaimed memory in case of per socket accounting, wake all related associations to a socket in a fair manner, that is, traverse the socket association list starting from the current neighbour of the association and issue a __sctp_write_space() to everyone until we end up waking ourselves. This guarantees that no association is preferred over another and even if more associations are taken into the one-to-many session, all receivers will get messages from the server and are not stalled forever on high load. This setting still leaves the advantage of per socket accounting in touch as an association can still use up global limits if unused by others. Fixes: 4eb701dfc618 ("[SCTP] Fix SCTP sendbuffer accouting.") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-08netfilter: nf_conntrack: flush net_gre->keymap_list only from gre helperAndrey Vagin2-21/+2
nf_ct_gre_keymap_flush() removes a nf_ct_gre_keymap object from net_gre->keymap_list and frees the object. But it doesn't clean a reference on this object from ct_pptp_info->keymap[dir]. Then nf_ct_gre_keymap_destroy() may release the same object again. So nf_ct_gre_keymap_flush() can be called only when we are sure that when nf_ct_gre_keymap_destroy will not be called. nf_ct_gre_keymap is created by nf_ct_gre_keymap_add() and the right way to destroy it is to call nf_ct_gre_keymap_destroy(). This patch marks nf_ct_gre_keymap_flush() as static, so this patch can break compilation of third party modules, which use nf_ct_gre_keymap_flush. I'm not sure this is the right way to deprecate this function. [ 226.540793] general protection fault: 0000 [#1] SMP [ 226.541750] Modules linked in: nf_nat_pptp nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre ip_gre ip_tunnel gre ppp_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack veth tun bridge stp llc ppdev microcode joydev pcspkr serio_raw virtio_console virtio_balloon floppy parport_pc parport pvpanic i2c_piix4 virtio_net drm_kms_helper ttm ata_generic virtio_pci virtio_ring virtio drm i2c_core pata_acpi [last unloaded: ip_tunnel] [ 226.541776] CPU: 0 PID: 49 Comm: kworker/u4:2 Not tainted 3.14.0-rc8+ #101 [ 226.541776] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 226.541776] Workqueue: netns cleanup_net [ 226.541776] task: ffff8800371e0000 ti: ffff88003730c000 task.ti: ffff88003730c000 [ 226.541776] RIP: 0010:[<ffffffff81389ba9>] [<ffffffff81389ba9>] __list_del_entry+0x29/0xd0 [ 226.541776] RSP: 0018:ffff88003730dbd0 EFLAGS: 00010a83 [ 226.541776] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800374e6c40 RCX: dead000000200200 [ 226.541776] RDX: 6b6b6b6b6b6b6b6b RSI: ffff8800371e07d0 RDI: ffff8800374e6c40 [ 226.541776] RBP: ffff88003730dbd0 R08: 0000000000000000 R09: 0000000000000000 [ 226.541776] R10: 0000000000000001 R11: ffff88003730d92e R12: 0000000000000002 [ 226.541776] R13: ffff88007a4c42d0 R14: ffff88007aef0000 R15: ffff880036cf0018 [ 226.541776] FS: 0000000000000000(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 226.541776] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 226.541776] CR2: 00007f07f643f7d0 CR3: 0000000036fd2000 CR4: 00000000000006f0 [ 226.541776] Stack: [ 226.541776] ffff88003730dbe8 ffffffff81389c5d ffff8800374ffbe4 ffff88003730dc28 [ 226.541776] ffffffffa0162a43 ffffffffa01627c5 ffff88007a4c42d0 ffff88007aef0000 [ 226.541776] ffffffffa01651c0 ffff88007a4c45e0 ffff88007aef0000 ffff88003730dc40 [ 226.541776] Call Trace: [ 226.541776] [<ffffffff81389c5d>] list_del+0xd/0x30 [ 226.541776] [<ffffffffa0162a43>] nf_ct_gre_keymap_destroy+0x283/0x2d0 [nf_conntrack_proto_gre] [ 226.541776] [<ffffffffa01627c5>] ? nf_ct_gre_keymap_destroy+0x5/0x2d0 [nf_conntrack_proto_gre] [ 226.541776] [<ffffffffa0162ab7>] gre_destroy+0x27/0x70 [nf_conntrack_proto_gre] [ 226.541776] [<ffffffffa0117de3>] destroy_conntrack+0x83/0x200 [nf_conntrack] [ 226.541776] [<ffffffffa0117d87>] ? destroy_conntrack+0x27/0x200 [nf_conntrack] [ 226.541776] [<ffffffffa0117d60>] ? nf_conntrack_hash_check_insert+0x2e0/0x2e0 [nf_conntrack] [ 226.541776] [<ffffffff81630142>] nf_conntrack_destroy+0x72/0x180 [ 226.541776] [<ffffffff816300d5>] ? nf_conntrack_destroy+0x5/0x180 [ 226.541776] [<ffffffffa011ef80>] ? kill_l3proto+0x20/0x20 [nf_conntrack] [ 226.541776] [<ffffffffa011847e>] nf_ct_iterate_cleanup+0x14e/0x170 [nf_conntrack] [ 226.541776] [<ffffffffa011f74b>] nf_ct_l4proto_pernet_unregister+0x5b/0x90 [nf_conntrack] [ 226.541776] [<ffffffffa0162409>] proto_gre_net_exit+0x19/0x30 [nf_conntrack_proto_gre] [ 226.541776] [<ffffffff815edf89>] ops_exit_list.isra.1+0x39/0x60 [ 226.541776] [<ffffffff815eecc0>] cleanup_net+0x100/0x1d0 [ 226.541776] [<ffffffff810a608a>] process_one_work+0x1ea/0x4f0 [ 226.541776] [<ffffffff810a6028>] ? process_one_work+0x188/0x4f0 [ 226.541776] [<ffffffff810a64ab>] worker_thread+0x11b/0x3a0 [ 226.541776] [<ffffffff810a6390>] ? process_one_work+0x4f0/0x4f0 [ 226.541776] [<ffffffff810af42d>] kthread+0xed/0x110 [ 226.541776] [<ffffffff8173d4dc>] ? _raw_spin_unlock_irq+0x2c/0x40 [ 226.541776] [<ffffffff810af340>] ? kthread_create_on_node+0x200/0x200 [ 226.541776] [<ffffffff8174747c>] ret_from_fork+0x7c/0xb0 [ 226.541776] [<ffffffff810af340>] ? kthread_create_on_node+0x200/0x200 [ 226.541776] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08 [ 226.541776] RIP [<ffffffff81389ba9>] __list_del_entry+0x29/0xd0 [ 226.541776] RSP <ffff88003730dbd0> [ 226.612193] ---[ end trace 985ae23ddfcc357c ]--- Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-07Merge branch 'akpm' (incoming from Andrew)Linus Torvalds1-1/+1
Merge second patch-bomb from Andrew Morton: - the rest of MM - zram updates - zswap updates - exit - procfs - exec - wait - crash dump - lib/idr - rapidio - adfs, affs, bfs, ufs - cris - Kconfig things - initramfs - small amount of IPC material - percpu enhancements - early ioremap support - various other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits) MAINTAINERS: update Intel C600 SAS driver maintainers fs/ufs: remove unused ufs_super_block_third pointer fs/ufs: remove unused ufs_super_block_second pointer fs/ufs: remove unused ufs_super_block_first pointer fs/ufs/super.c: add __init to init_inodecache() doc/kernel-parameters.txt: add early_ioremap_debug arm64: add early_ioremap support arm64: initialize pgprot info earlier in boot x86: use generic early_ioremap mm: create generic early_ioremap() support x86/mm: sparse warning fix for early_memremap lglock: map to spinlock when !CONFIG_SMP percpu: add preemption checks to __this_cpu ops vmstat: use raw_cpu_ops to avoid false positives on preemption checks slub: use raw_cpu_inc for incrementing statistics net: replace __this_cpu_inc in route.c with raw_cpu_inc modules: use raw_cpu_write for initialization of per cpu refcount. mm: use raw_cpu ops for determining current NUMA node percpu: add raw_cpu_ops slub: fix leak of 'name' in sysfs_slab_add ...
2014-04-07net: replace __this_cpu_inc in route.c with raw_cpu_incChristoph Lameter1-1/+1
The RT_CACHE_STAT_INC macro triggers the new preemption checks for __this_cpu ops. I do not see any other synchronization that would allow the use of a __this_cpu operation here however in commit dbd2915ce87e ("[IPV4]: RT_CACHE_STAT_INC() warning fix") Andrew justifies the use of raw_smp_processor_id() here because "we do not care" about races. In the past we agreed that the price of disabling interrupts here to get consistent counters would be too high. These counters may be inaccurate due to race conditions. The use of __this_cpu op improves the situation already from what commit dbd2915ce87e did since the single instruction emitted on x86 does not allow the race to occur anymore. However, non x86 platforms could still experience a race here. Trace: __this_cpu_add operation in preemptible [00000000] code: avahi-daemon/1193 caller is __this_cpu_preempt_check+0x38/0x60 CPU: 1 PID: 1193 Comm: avahi-daemon Tainted: GF 3.12.0-rc4+ #187 Call Trace: check_preemption_disabled+0xec/0x110 __this_cpu_preempt_check+0x38/0x60 __ip_route_output_key+0x575/0x8c0 ip_route_output_flow+0x27/0x70 udp_sendmsg+0x825/0xa20 inet_sendmsg+0x85/0xc0 sock_sendmsg+0x9c/0xd0 ___sys_sendmsg+0x37c/0x390 __sys_sendmsg+0x49/0x90 SyS_sendmsg+0x12/0x20 tracesys+0xe1/0xe6 Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds2-65/+64
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-07netdev: remove potentially harmful checksVeaceslav Falico1-4/+2
Currently we're checking a variable for != NULL after actually dereferencing it, in netdev_lower_get_next_private*(). It's counter-intuitive at best, and can lead to faulty usage (as it implies that the variable can be NULL), so fix it by removing the useless checks. Reported-by: Daniel Borkmann <dborkman@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Jiri Pirko <jiri@resnulli.us> CC: stephen hemminger <stephen@networkplumber.org> CC: Jerry Chu <hkchu@google.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 04:45:21 +0000