summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2020-05-16ethtool: don't call set_channels in drivers if config didn't changeJakub Kicinski1-0/+6
Don't call drivers if nothing changed. Netlink code already contains this logic. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16ethtool: check if there is at least one channel for TX/RX in the coreJakub Kicinski2-2/+23
Having a channel config with no ability to RX or TX traffic is clearly wrong. Check for this in the core so the drivers don't have to. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16mptcp: Use 32-bit DATA_ACK when possibleChristoph Paasch3-9/+27
RFC8684 allows to send 32-bit DATA_ACKs as long as the peer is not sending 64-bit data-sequence numbers. The 64-bit DSN is only there for extreme scenarios when a very high throughput subflow is combined with a long-RTT subflow such that the high-throughput subflow wraps around the 32-bit sequence number space within an RTT of the high-RTT subflow. It is thus a rare scenario and we should try to use the 32-bit DATA_ACK instead as long as possible. It allows to reduce the TCP-option overhead by 4 bytes, thus makes space for an additional SACK-block. It also makes tcpdumps much easier to read when the DSN and DATA_ACK are both either 32 or 64-bit. Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16netns: enable to inherit devconf from current netnsNicolas Dichtel3-9/+41
The goal is to be able to inherit the initial devconf parameters from the current netns, ie the netns where this new netns has been created. This is useful in a containers environment where /proc/sys is read only. For example, if a pod is created with specifics devconf parameters and has the capability to create netns, the user expects to get the same parameters than his 'init_net', which is not the real init_net in this case. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller27-81/+237
Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds21-47/+153
Pull networking fixes from David Miller: 1) Fix sk_psock reference count leak on receive, from Xiyu Yang. 2) CONFIG_HNS should be invisible, from Geert Uytterhoeven. 3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this, from Maciej Żenczykowski. 4) ipv4 route redirect backoff wasn't actually enforced, from Paolo Abeni. 5) Fix netprio cgroup v2 leak, from Zefan Li. 6) Fix infinite loop on rmmod in conntrack, from Florian Westphal. 7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet. 8) Various bpf probe handling fixes, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits) selftests: mptcp: pm: rm the right tmp file dpaa2-eth: properly handle buffer size restrictions bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range bpf: Restrict bpf_probe_read{, str}() only to archs where they work MAINTAINERS: Mark networking drivers as Maintained. ipmr: Add lockdep expression to ipmr_for_each_table macro ipmr: Fix RCU list debugging warning drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810 tcp: fix error recovery in tcp_zerocopy_receive() MAINTAINERS: Add Jakub to networking drivers. MAINTAINERS: another add of Karsten Graul for S390 networking drivers: ipa: fix typos for ipa_smp2p structure doc pppoe: only process PADT targeted at local interfaces selftests/bpf: Enforce returning 0 for fentry/fexit programs bpf: Enforce returning 0 for fentry/fexit progs net: stmmac: fix num_por initialization security: Fix the default value of secid_to_secctx hook libbpf: Fix register naming in PT_REGS s390 macros ...
2020-05-15mptcp: cope better with MP_JOIN failurePaolo Abeni1-6/+9
Currently, on MP_JOIN failure we reset the child socket, but leave the request socket untouched. tcp_check_req will deal with it according to the 'tcp_abort_on_overflow' sysctl value - by default the req socket will stay alive. The above leads to inconsistent behavior on MP JOIN failure, and bad listener overflow accounting. This patch addresses the issue leveraging the infrastructure just introduced to ask the TCP stack to drop the req on failure. The child socket is not freed anymore by subflow_syn_recv_sock(), instead it's moved to a dead state and will be disposed by the next sock_put done by the TCP stack, so that listener overflow accounting is not affected by MP JOIN failure. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15inet_connection_sock: factor out destroy helper.Paolo Abeni1-5/+1
Move the steps to prepare an inet_connection_sock for forced disposal inside a separate helper. No functional changes inteded, this will just simplify the next patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15mptcp: add new sock flag to deal with join subflowsPaolo Abeni3-8/+4
MP_JOIN subflows must not land into the accept queue. Currently tcp_check_req() calls an mptcp specific helper to detect such scenario. Such helper leverages the subflow context to check for MP_JOIN subflows. We need to deal also with MP JOIN failures, even when the subflow context is not available due allocation failure. A possible solution would be changing the syn_recv_sock() signature to allow returning a more descriptive action/ error code and deal with that in tcp_check_req(). Since the above need is MPTCP specific, this patch instead uses a TCP request socket hole to add a MPTCP specific flag. Such flag is used by the MPTCP syn_recv_sock() to tell tcp_check_req() how to deal with the request socket. This change is a no-op for !MPTCP build, and makes the MPTCP code simpler. It allows also the next patch to deal correctly with MP JOIN failure. v1 -> v2: - be more conservative on drop_req initialization (Mat) RFC -> v1: - move the drop_req bit inside tcp_request_sock (Eric) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller5-16/+45
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-05-15 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 1 day(s) which contain a total of 67 files changed, 741 insertions(+), 252 deletions(-). The main changes are: 1) bpf_xdp_adjust_tail() now allows to grow the tail as well, from Jesper. 2) bpftool can probe CONFIG_HZ, from Daniel. 3) CAP_BPF is introduced to isolate user processes that use BPF infra and to secure BPF networking services by dropping CAP_SYS_ADMIN requirement in certain cases, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15net: sched: cls_flower: implement terse dump supportVlad Buslov1-0/+43
Implement tcf_proto_ops->terse_dump() callback for flower classifier. Only dump handle, flags and action data in terse mode. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15net: sched: implement terse dump support in actVlad Buslov2-8/+50
Extend tcf_action_dump() with boolean argument 'terse' that is used to request terse-mode action dump. In terse mode only essential data needed to identify particular action (action kind, cookie, etc.) and its stats is put to resulting skb and everything else is omitted. Implement tcf_exts_terse_dump() helper in cls API that is intended to be used to request terse dump of all exts (actions) attached to the filter. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15net: sched: introduce terse dump flagVlad Buslov1-8/+31
Add new TCA_DUMP_FLAGS attribute and use it in cls API to request terse filter output from classifiers with TCA_DUMP_FLAGS_TERSE flag. This option is intended to be used to improve performance of TC filter dump when userland only needs to obtain stats and not the whole classifier/action data. Extend struct tcf_proto_ops with new terse_dump() callback that must be defined by supporting classifier implementations. Support of the options in specific classifiers and actions is implemented in following patches in the series. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15net: core: recursively find netdev by device nodeTobias Waldekranz1-5/+5
The assumption that a device node is associated either with the netdev's device, or the parent of that device, does not hold for all drivers. E.g. Freescale's DPAA has two layers of platform devices above the netdev. Instead, recursively walk up the tree from the netdev, allowing any parent to match against the sought after node. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15bpf: Implement CAP_BPFAlexei Starovoitov2-4/+4
Implement permissions as stated in uapi/linux/capability.h In order to do that the verifier allow_ptr_leaks flag is split into four flags and they are set as: env->allow_ptr_leaks = bpf_allow_ptr_leaks(); env->bypass_spec_v1 = bpf_bypass_spec_v1(); env->bypass_spec_v4 = bpf_bypass_spec_v4(); env->bpf_capable = bpf_capable(); The first three currently equivalent to perfmon_capable(), since leaking kernel pointers and reading kernel memory via side channel attacks is roughly equivalent to reading kernel memory with cap_perfmon. 'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions, subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the verifier, run time mitigations in bpf array, and enables indirect variable access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code by the verifier. That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN will have speculative checks done by the verifier and other spectre mitigation applied. Such networking BPF program will not be able to leak kernel pointers and will not be able to access arbitrary kernel memory. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com
2020-05-14bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().Jesper Dangaard Brouer1-4/+12
Update the memory requirements, when adding xdp.frame_sz in BPF test_run function bpf_prog_test_run_xdp() which e.g. is used by XDP selftests. Specifically add the expected reserved tailroom, but also allocated a larger memory area to reflect that XDP frames usually comes in this format. Limit the provided packet data size to 4096 minus headroom + tailroom, as this also reflect a common 3520 bytes MTU limit with XDP. Note that bpf_test_init already use a memory allocation method that clears memory. Thus, this already guards against leaking uninit kernel memory. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158945349549.97035.15316291762482444006.stgit@firesoul
2020-05-14xdp: Clear grow memory in bpf_xdp_adjust_tail()Jesper Dangaard Brouer1-0/+4
Clearing memory of tail when grow happens, because it is too easy to write a XDP_PASS program that extend the tail, which expose this memory to users that can run tcpdump. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158945349039.97035.5262100484553494.stgit@firesoul
2020-05-14xdp: Allow bpf_xdp_adjust_tail() to grow packet sizeJesper Dangaard Brouer1-2/+9
Finally, after all drivers have a frame size, allow BPF-helper bpf_xdp_adjust_tail() to grow or extend packet size at frame tail. Remember that helper/macro xdp_data_hard_end have reserved some tailroom. Thus, this helper makes sure that the BPF-prog don't have access to this tailroom area. V2: Remove one chicken check and use WARN_ONCE for other Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158945348530.97035.12577148209134239291.stgit@firesoul
2020-05-14xdp: Xdp_frame add member frame_sz and handle in convert_to_xdp_frameJesper Dangaard Brouer1-0/+8
Use hole in struct xdp_frame, when adding member frame_sz, which keeps same sizeof struct (32 bytes) Drivers ixgbe and sfc had bug cases where the necessary/expected tailroom was not reserved. This can lead to some hard to catch memory corruption issues. Having the drivers frame_sz this can be detected when packet length/end via xdp->data_end exceed the xdp_data_hard_end pointer, which accounts for the reserved the tailroom. When detecting this driver issue, simply fail the conversion with NULL, which results in feedback to driver (failing xdp_do_redirect()) causing driver to drop packet. Given the lack of consistent XDP stats, this can be hard to troubleshoot. And given this is a driver bug, we want to generate some more noise in form of a WARN stack dump (to ID the driver code that inlined convert_to_xdp_frame). Inlining the WARN macro is problematic, because it adds an asm instruction (on Intel CPUs ud2) what influence instruction cache prefetching. Thus, introduce xdp_warn and macro XDP_WARN, to avoid this and at the same time make identifying the function and line of this inlined function easier. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158945337313.97035.10015729316710496600.stgit@firesoul
2020-05-14net: XDP-generic determining XDP frame sizeJesper Dangaard Brouer1-6/+8
The SKB "head" pointer points to the data area that contains skb_shared_info, that can be found via skb_end_pointer(). Given xdp->data_hard_start have been established (basically pointing to skb->head), frame size is between skb_end_pointer() and data_hard_start, plus the size reserved to skb_shared_info. Change the bpf_xdp_adjust_tail offset adjust of skb->len, to be a positive offset number on grow, and negative number on shrink. As this seems more natural when reading the code. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158945336804.97035.7164852191163722056.stgit@firesoul
2020-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller10-70/+308
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-05-14 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Merged tag 'perf-for-bpf-2020-05-06' from tip tree that includes CAP_PERFMON. 2) support for narrow loads in bpf_sock_addr progs and additional helpers in cg-skb progs, from Andrey. 3) bpf benchmark runner, from Andrii. 4) arm and riscv JIT optimizations, from Luke. 5) bpf iterator infrastructure, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14bpf: Introduce bpf_sk_{, ancestor_}cgroup_id helpersAndrey Ignatov1-9/+51
With having ability to lookup sockets in cgroup skb programs it becomes useful to access cgroup id of retrieved sockets so that policies can be implemented based on origin cgroup of such socket. For example, a container running in a cgroup can have cgroup skb ingress program that can lookup peer socket that is sending packets to a process inside the container and decide whether those packets should be allowed or denied based on cgroup id of the peer. More specifically such ingress program can implement intra-host policy "allow incoming packets only from this same container and not from any other container on same host" w/o relying on source IP addresses since quite often it can be the case that containers share same IP address on the host. Introduce two new helpers for this use-case: bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id(). These helpers are similar to existing bpf_skb_{,ancestor_}cgroup_id helpers with the only difference that sk is used to get cgroup id instead of skb, and share code with them. See documentation in UAPI for more details. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/f5884981249ce911f63e9b57ecd5d7d19154ff39.1589486450.git.rdna@fb.com
2020-05-14bpf: Allow skb_ancestor_cgroup_id helper in cgroup skbAndrey Ignatov1-0/+2
cgroup skb programs already can use bpf_skb_cgroup_id. Allow bpf_skb_ancestor_cgroup_id as well so that container policies can be implemented for a container that can have sub-cgroups dynamically created, but policies should still be implemented based on cgroup id of container itself not on an id of a sub-cgroup. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/8874194d6041eba190356453ea9f6071edf5f658.1589486450.git.rdna@fb.com
2020-05-14bpf: Allow sk lookup helpers in cgroup skbAndrey Ignatov1-0/+8
Currently sk lookup helpers are allowed in tc, xdp, sk skb, and cgroup sock_addr programs. But they would be useful in cgroup skb as well so that for example cgroup skb ingress program can lookup a peer socket a packet comes from on same host and make a decision whether to allow or deny this packet based on the properties of that socket, e.g. cgroup that peer socket belongs to. Allow the following sk lookup helpers in cgroup skb: * bpf_sk_lookup_tcp; * bpf_sk_lookup_udp; * bpf_sk_release; * bpf_skc_lookup_tcp. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/f8c7ee280f1582b586629436d777b6db00597d63.1589486450.git.rdna@fb.com
2020-05-14bpf: Support narrow loads from bpf_sock_addr.user_portAndrey Ignatov1-8/+7
bpf_sock_addr.user_port supports only 4-byte load and it leads to ugly code in BPF programs, like: volatile __u32 user_port = ctx->user_port; __u16 port = bpf_ntohs(user_port); Since otherwise clang may optimize the load to be 2-byte and it's rejected by verifier. Add support for 1- and 2-byte loads same way as it's supported for other fields in bpf_sock_addr like user_ip4, msg_src_ip4, etc. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/c1e983f4c17573032601d0b2b1f9d1274f24bc16.1589420814.git.rdna@fb.com
2020-05-14ipmr: Add lockdep expression to ipmr_for_each_table macroAmol Grover1-3/+4
During the initialization process, ipmr_new_table() is called to create new tables which in turn calls ipmr_get_table() which traverses net->ipv4.mr_tables without holding the writer lock. However, this is safe to do so as no tables exist at this time. Hence add a suitable lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-next-20200428-syzkaller #0 Not tainted ----------------------------- net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!! ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136 ipmr_new_table net/ipv4/ipmr.c:403 [inline] ipmr_rules_init net/ipv4/ipmr.c:248 [inline] ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089 Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Fix RCU list debugging warningAmol Grover1-1/+2
ipmr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside of an RCU read side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning at boot: [ 4.319347] ============================= [ 4.319349] WARNING: suspicious RCU usage [ 4.319351] 5.5.4-stable #17 Tainted: G E [ 4.319352] ----------------------------- [ 4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!! Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14devlink: refactor end checks in devlink_nl_cmd_region_read_dumpitJakub Kicinski1-25/+16
Clean up after recent fixes, move address calculations around and change the variable init, so that we can have just one start_offset == end_offset check. Make the check a little stricter to preserve the -EINVAL error if requested start offset is larger than the region itself. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14tcp: fix error recovery in tcp_zerocopy_receive()Eric Dumazet1-3/+4
If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller4-8/+38
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann. 2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion commands, from Paul Blakey. 3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan. 4) Infinite loop when removing nf_conntrack module, from Florian Westphal. 5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing the timeout from the software path. 6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13ipv6: set msg_control_is_user in do_ipv6_getsockoptChristoph Hellwig1-0/+1
While do_ipv6_getsockopt does not call the high-level recvmsg helper, the msghdr eventually ends up being passed to put_cmsg anyway, and thus needs msg_control_is_user set to the proper value. Fixes: 1f466e1f15cf ("net: cleanly handle kernel vs user buffers for ->msg_control") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix failed service subscription deletionTuong Lien2-4/+15
When a service subscription is expired or canceled by user, it needs to be deleted from the subscription list, so that new subscriptions can be registered (max = 65535 per net). However, there are two issues in code that can cause such an unused subscription to persist: 1) The 'tipc_conn_delete_sub()' has a loop on the subscription list but it makes a break shortly when the 1st subscription differs from the one specified, so the subscription will not be deleted. 2) In case a subscription is canceled, the code to remove the 'TIPC_SUB_CANCEL' flag from the subscription filter does not work if it is a local subscription (i.e. the little endian isn't involved). So, it will be no matches when looking for the subscription to delete later. The subscription(s) will be removed eventually when the user terminates its topology connection but that could be a long time later. Meanwhile, the number of available subscriptions may be exhausted. This commit fixes the two issues above, so as needed a subscription can be deleted correctly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix memory leak in service subscriptingTuong Lien1-1/+3
Upon receipt of a service subscription request from user via a topology connection, one 'sub' object will be allocated in kernel, so it will be able to send an event of the service if any to the user correspondingly then. Also, in case of any failure, the connection will be shutdown and all the pertaining 'sub' objects will be freed. However, there is a race condition as follows resulting in memory leak: receive-work connection send-work | | | sub-1 |<------//-------| | sub-2 |<------//-------| | | |<---------------| evt for sub-x sub-3 |<------//-------| | : : : : : : | /--------| | | | * peer closed | | | | | | | |<-------X-------| evt for sub-y | | |<===============| sub-n |<------/ X shutdown | -> orphan | | That is, the 'receive-work' may get the last subscription request while the 'send-work' is shutting down the connection due to peer close. We had a 'lock' on the connection, so the two actions cannot be carried out simultaneously. If the last subscription is allocated e.g. 'sub-n', before the 'send-work' closes the connection, there will be no issue at all, the 'sub' objects will be freed. In contrast the last subscription will become orphan since the connection was closed, and we released all references. This commit fixes the issue by simply adding one test if the connection remains in 'connected' state right after we obtain the connection lock, then a subscription object can be created as usual, otherwise we ignore it. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Reported-by: Thang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix large latency in smart Nagle streamingTuong Lien1-11/+31
Currently when a connection is in Nagle mode, we set the 'ack_required' bit in the last sending buffer and wait for the corresponding ACK prior to pushing more data. However, on the receiving side, the ACK is issued only when application really reads the whole data. Even if part of the last buffer is received, we will not do the ACK as required. This might cause an unnecessary delay since the receiver does not always fetch the message as fast as the sender, resulting in a large latency in the user message sending, which is: [one RTT + the receiver processing time]. The commit makes Nagle ACK as soon as possible i.e. when a message with the 'ack_required' arrives in the receiving side's stack even before it is processed or put in the socket receive queue... This way, we can limit the streaming latency to one RTT as committed in Nagle mode. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13net: ignore sock_from_file errors in __scm_install_fdChristoph Hellwig1-1/+1
The code had historically been ignoring these errors, and my recent refactoring changed that, which broke ssh in some setups. Fixes: 2618d530dd8b ("net/scm: cleanup scm_detach_fds") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13bpf: Enable bpf_iter targets registering ctx argument typesYonghong Song3-5/+10
Commit b121b341e598 ("bpf: Add PTR_TO_BTF_ID_OR_NULL support") adds a field btf_id_or_null_non0_off to bpf_prog->aux structure to indicate that the first ctx argument is PTR_TO_BTF_ID reg_type and all others are PTR_TO_BTF_ID_OR_NULL. This approach does not really scale if we have other different reg types in the future, e.g., a pointer to a buffer. This patch enables bpf_iter targets registering ctx argument reg types which may be different from the default one. For example, for pointers to structures, the default reg_type is PTR_TO_BTF_ID for tracing program. The target can register a particular pointer type as PTR_TO_BTF_ID_OR_NULL which can be used by the verifier to enforce accesses. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513180221.2949882-1-yhs@fb.com
2020-05-13bpf: Change func bpf_iter_unreg_target() signatureYonghong Song1-1/+1
Change func bpf_iter_unreg_target() parameter from target name to target reg_info, similar to bpf_iter_reg_target(). Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513180220.2949737-1-yhs@fb.com
2020-05-13bpf: net: Refactor bpf_iter target registrationYonghong Song2-18/+18
Currently bpf_iter_reg_target takes parameters from target and allocates memory to save them. This is really not necessary, esp. in the future we may grow information passed from targets to bpf_iter manager. The patch refactors the code so target reg_info becomes static and bpf_iter manager can just take a reference to it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13Merge branch 'for-upstream' of ↵David S. Miller10-141/+363
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-05-13 Here's a second attempt at a bluetooth-next pull request which supercedes the one dated 2020-05-09. This should have the issues discovered by Jakub fixed. - Add support for Intel Typhoon Peak device (8087:0032) - Add device tree bindings for Realtek RTL8723BS device - Add device tree bindings for Qualcomm QCA9377 device - Add support for experimental features configuration through mgmt - Add driver hook to prevent wake from suspend - Add support for waiting for L2CAP disconnection response - Multiple fixes & cleanups to the btbcm driver - Add support for LE scatternet topology for selected devices - A few other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13Bluetooth: L2CAP: add support for waiting disconnection respArchie Pusaka1-7/+23
Whenever we disconnect a L2CAP connection, we would immediately report a disconnection event (EPOLLHUP) to the upper layer, without waiting for the response of the other device. This patch offers an option to wait until we receive a disconnection response before reporting disconnection event, by using the "how" parameter in l2cap_sock_shutdown(). Therefore, upper layer can opt to wait for disconnection response by shutdown(sock, SHUT_WR). This can be used to enforce proper disconnection order in HID, where the disconnection of the interrupt channel must be complete before attempting to disconnect the control channel. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Handle Inquiry Cancel error after Inquiry CompleteSonny Sasaka1-2/+17
After sending Inquiry Cancel command to the controller, it is possible that Inquiry Complete event comes before Inquiry Cancel command complete event. In this case the Inquiry Cancel command will have status of Command Disallowed since there is no Inquiry session to be cancelled. This case should not be treated as error, otherwise we can reach an inconsistent state. Example of a btmon trace when this happened: < HCI Command: Inquiry Cancel (0x01|0x0002) plen 0 > HCI Event: Inquiry Complete (0x01) plen 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 Inquiry Cancel (0x01|0x0002) ncmd 1 Status: Command Disallowed (0x0c) Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Add hook for driver to prevent wake from suspendAbhishek Pandit-Subedi1-2/+4
Let drivers have a hook to disable configuring scanning during suspend. Drivers should use the device_may_wakeup function call to determine whether hci should be configured for wakeup. For example, an implementation for btusb may look like the following: bool btusb_prevent_wake(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); return !device_may_wakeup(&data->udev->dev); } Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Rename BT_SUSPEND_COMPLETEAbhishek Pandit-Subedi2-2/+2
Renamed BT_SUSPEND_COMPLETE to BT_SUSPEND_CONFIGURE_WAKE since it sets up the event filter and whitelist for wake-up. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Modify LE window and interval for suspendAbhishek Pandit-Subedi1-1/+1
When a device is suspended, it doesn't need to be as responsive to connection events. Increase the interval to 640ms (creating a duty cycle of roughly 1.75%) so that passive scanning uses much less power (vs previous duty cycle of 18.75%). The new window + interval combination has been tested to work with HID devices (which are currently the only devices capable of wake up). Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Fix incorrect type for window and intervalAbhishek Pandit-Subedi1-1/+1
The types for window and interval should be uint16, not uint8. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-12netlabel: cope with NULL catmapPaolo Abeni3-3/+12
The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12net: dsa: tag_sja1105: appease sparse checks for ethertype accessorsVladimir Oltean1-2/+2
A comparison between a value from the packet and an integer constant value needs to be done by converting the value from the packet from net->host, or the constant from host->net. Not the other way around. Even though it makes no practical difference, correct that. Fixes: 38b5beeae7a4 ("net: dsa: sja1105: prepare tagger for handling DSA tags and VLAN simultaneously") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12erspan: Check IFLA_GRE_ERSPAN_VER is set.William Tu1-1/+2
Add a check to make sure the IFLA_GRE_ERSPAN_VER is provided by users. Fixes: f989d546a2d5 ("erspan: Add type I version 0 support.") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12net: dsa: tag_sja1105: implement sub-VLAN decodingVladimir Oltean1-0/+19
Create a subvlan_map as part of each port's tagger private structure. This keeps reverse mappings of bridge-to-dsa_8021q VLAN retagging rules. Note that as of this patch, this piece of code is never engaged, due to the fact that the driver hasn't installed any retagging rule, so we'll always see packets with a subvlan code of 0 (untagged). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANsVladimir Oltean1-8/+48
For switches that support VLAN retagging, such as sja1105, we extend dsa_8021q by encoding a "sub-VLAN" into the remaining 3 free bits in the dsa_8021q tag. A sub-VLAN is nothing more than a number in the range 0-7, which serves as an index into a per-port driver lookup table. The sub-VLAN value of zero means that traffic is untagged (this is also backwards-compatible with dsa_8021q without retagging). The switch should be configured to retag VLAN-tagged traffic that gets transmitted towards the CPU port (and towards the CPU only). Example: bridge vlan add dev sw1p0 vid 100 The switch retags frames received on port 0, going to the CPU, and having VID 100, to the VID of 1104 (0x0450). In dsa_8021q language: | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +-----------+-----+-----------------+-----------+-----------------------+ | DIR | SVL | SWITCH_ID | SUBVLAN | PORT | +-----------+-----+-----------------+-----------+-----------------------+ 0x0450 means: - DIR = 0b01: this is an RX VLAN - SUBVLAN = 0b001: this is subvlan #1 - SWITCH_ID = 0b001: this is switch 1 (see the name "sw1p0") - PORT = 0b0000: this is port 0 (see the name "sw1p0") The driver also remembers the "1 -> 100" mapping. In the hotpath, if the sub-VLAN from the tag encodes a non-untagged frame, this mapping is used to create a VLAN hwaccel tag, with the value of 100. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-21 00:31:40 +0000