summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2011-12-21Bluetooth: Always compile SCO and L2CAP in Bluetooth CoreUlisses Furquim6-35/+15
The handling of SCO audio links and the L2CAP protocol are essential to any system with Bluetooth thus are always compiled in from now on. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-21Bluetooth: Remove global mutex hci_task_lockUlisses Furquim1-20/+1
The hci_task_lock mutex (previously a lock) was supposed to protect the register/unregister of HCI protocols against RX/TX tasks. This will not be needed anymore because SCO and L2CAP will always be compiled. Moreover, with the recent move of RX/TX to workqueues per device the global hci_task_lock was causing starvation between different HCI devices. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Rename info_work to info_timerGustavo F. Padovan1-7/+7
It makes more sense this way, since info_timer is a timer using delayed work API. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: convert security timer to delayed_workGustavo F. Padovan2-9/+10
This one also needs to run in process context Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Move l2cap_{set,clear}_timer to l2cap.hGustavo F. Padovan1-14/+0
It is the only place where it is used. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Clean up magic pointersAndrei Emeltchenko1-4/+4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Check for flow control modeAndrei Emeltchenko1-0/+5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Initialize default flow control modeAndrei Emeltchenko1-0/+4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-20Bluetooth: Split ctrl init to BREDR and AMP partsAndrei Emeltchenko2-18/+49
Current controller initialization is moved tp bredr_init and new function added amp_init to handle later AMP init sequence. Current AMP init sequence include Reset and Read Local Version. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-19mac80211: Fixing sparse warning at sta_info.cYogesh Ashok Powar1-2/+7
The commit 42624d4913a00219a8fdbb4bafd634d1d843be85 created following sparse warning >net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces) >net/mac80211/sta_info.c:965:24: expected struct tid_ampdu_tx *tid_tx >net/mac80211/sta_info.c:965:24: got struct tid_ampdu_tx [noderef] <asn:4>*<noident> Making use of rcu_dereference_protected to fix the problem. V2: - Replacing rcu_dereference with rcu_dereference_protected as suggested by Johannes. - Adding mutex_lock/unlock to satisfy the condition at rcu_dereference_protected Cc: Nishant Sarmukadam <nishants@marvell.com> Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19NFC: use kfree_skb() for sk_buffsDan Carpenter1-1/+1
This is a struct sk_buff pointer and it should be freed with kfree_skb() instead of kfree(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19NFC: double unlock in nfc_llcp_recv_connect()Dan Carpenter1-3/+1
We unlock inside the if block on the other side of this if else statement. It could result in calling mutex_unlock() twice. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19mac80211: handle SMPS action framesJohannes Berg1-0/+58
When a peer changes SMPS state we should update rate control so it doesn't have to detect it by itself. It can't detect "dynamic" mode anyway since that just requires rts-cts handshaking. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19NFC: Fix LLCP related build failureSamuel Ortiz1-2/+2
llcp_mac routines should be static and inlined or build will fail with NFC selected without LLCP. This patch fixes: LD [M] net/nfc/nfc.o net/nfc/netlink.o: In function `nfc_llcp_mac_is_down': netlink.c:(.text+0x0): multiple definition of `nfc_llcp_mac_is_down' net/nfc/core.o:(.text+0x0): first defined here net/nfc/netlink.o: In function `nfc_llcp_mac_is_up': netlink.c:(.text+0x10): multiple definition of `nfc_llcp_mac_is_up' net/nfc/core.o:(.text+0x10): first defined here net/nfc/af_nfc.o: In function `nfc_llcp_mac_is_down': (.text+0x0): multiple definition of `nfc_llcp_mac_is_down' net/nfc/core.o:(.text+0x0): first defined here net/nfc/af_nfc.o: In function `nfc_llcp_mac_is_up': (.text+0x10): multiple definition of `nfc_llcp_mac_is_up' net/nfc/core.o:(.text+0x10): first defined here net/nfc/rawsock.o: In function `nfc_llcp_mac_is_down': rawsock.c:(.text+0x0): multiple definition of `nfc_llcp_mac_is_down' net/nfc/core.o:(.text+0x0): first defined here net/nfc/rawsock.o: In function `nfc_llcp_mac_is_up': rawsock.c:(.text+0x10): multiple definition of `nfc_llcp_mac_is_up' net/nfc/core.o:(.text+0x10): first defined here Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19cfg80211: Return beacon loss count in stationPaul Stewart4-1/+16
If station info contains a beacon loss count, return it to userspace. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19mac80211: split addba retries in timeNikolay Martynov2-1/+24
Currently code allows three (HT_AGG_MAX_RETRIES) unanswered addba requests. When this limit is reached aggregation is turned off for given TID permanently. This doesn't seem right: three requests is not that much, some 'blackout' can happen, but effect of it affects whole connection indefinitely. This patch increases number of retries to 15. Also, when there have been 3 or more retries it splits further retries apart by 15 seconds instead of sending them in very short period of time. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19Merge branch 'master' of ↵John W. Linville11-820/+828
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2011-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetoothGustavo F. Padovan3-2/+13
Conflicts: net/bluetooth/l2cap_core.c
2011-12-18Revert "Bluetooth: Revert: Fix L2CAP connection establishment"Gustavo F. Padovan1-1/+1
This reverts commit 4dff523a913197e3314c7b0d08734ab037709093. It was reported that this patch cause issues when trying to connect to legacy devices so reverting it. Reported-by: David Fries <david@fries.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Clear RFCOMM session timer when disconnecting last channelMat Martineau1-0/+1
When the last RFCOMM data channel is closed, a timer is normally set up to disconnect the control channel at a later time. If the control channel disconnect command is sent with the timer pending, the timer needs to be cancelled. If the timer is not cancelled in this situation, the reference counting logic for the RFCOMM session does not work correctly when the remote device closes the L2CAP connection. The session is freed at the wrong time, leading to a kernel panic. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Prevent uninitialized data access in L2CAP configurationMat Martineau1-1/+11
When configuring an ERTM or streaming mode connection, remote devices are expected to send an RFC option in a successful config response. A misbehaving remote device might not send an RFC option, and the L2CAP code should not access uninitialized data in this case. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Incoming ACL packets do not force active modeMat Martineau1-1/+1
Incoming sk_buffs always have bt_cb(skb)->force_active set to 0, so it's misleading to use that value from the control block when calling hci_conn_enter_active_mode() for incoming data. The destination socket is not known in the HCI layer, so the force_active setting for each socket isn't known either. Hard-coding the force_active parameter does not change any behavior, but makes it obvious that incoming ACL data never exits sniff mode. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Simplify num_comp_pkts_evt functionAndrei Emeltchenko1-18/+29
Simplify function and remove fourth level of indentation. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Add HCI Read Data Block Size functionAndrei Emeltchenko1-0/+26
Implement block size read function. Use different variables for packet-based and block-based flow control. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Use correct struct for user_confirm_neg_replyJohan Hedberg1-1/+1
This patch fixes user_confirm_neg_reply to use the appropriate struct for accessing the call parameters. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Add timer for automatically disabling the service cacheJohan Hedberg2-5/+38
We do not want the service cache to be enabled indefinitely after mgmt_read_info is called. To solve this a timer is added which will automatically disable the cache if mgmt_set_dev_class isn't called within 5 seconds of calling mgmt_read_info. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Move EIR and CoD update functions to a better positionJohan Hedberg1-173/+173
Due to the upcoming addition of a service cache timer the functions to update the EIR and CoD need to be higher up in mgmt.c in order to avoid unnecessary forward-declarations. This patch simply moves code around without any other changes in order to make subsequent patches more readable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Remove mgmt_set_service_cacheJohan Hedberg2-51/+12
Instead of having an explicit service cache command we can make the mgmt API simpler by implicitly enabling the cache when mgmt_read_info is called for the first time and disabling it when mgmt_set_dev_class is called. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Move mgmt_set_fast_connectable to the right locationJohan Hedberg1-6/+6
Fast connectable is logically after the connectable property so that's where it should show up in the code as well (it's also after connectable in the settings bitfield). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Update mgmt_read_info and related mgmt messagesJohan Hedberg1-52/+94
This patch updates the mgmt_read_info and related messages to the latest management API which uses a bitfield of settings instead of individual boolean values. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Add ProFUSION's copyrightGustavo F. Padovan3-0/+3
Add ProFUSION's copyright to some files I've been touching recently. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Use system workqueue to schedule power_onGustavo F. Padovan2-2/+2
hdev->workqueue should be only for rx/tx, so move this one out. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Remove work_add and work_del from hci_sysfsGustavo F. Padovan1-44/+27
As we run in process context now we don't need worqueue to add e del from sysfs. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Use new alloc_workqueue()Gustavo F. Padovan1-1/+2
Update hdev workqueue API usage to use the new interface, this new interface also allow us to mark this workqueue as WQ_HIGHPRI, so now rx and tx work gets higher priority when running. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: move power_off to system workqueueGustavo F. Padovan2-2/+2
hdev->workqueue will be only for for rx/tx/cmd processing, all other small works should go to the system workqueue for now. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Change l2cap chan_list to use RCUGustavo F. Padovan1-61/+58
This list has much more reads than writes, so RCU makes senses here, also it avoid deadlock against the socket lock. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: invert locking order in connect pathGustavo F. Padovan2-60/+59
This move some checking code that was in l2cap_sock_connect() to l2cap_chan_connect(). Thus we can invert the lock calls, i.e., call lock_sock() before hci_dev_lock() to avoid a deadlock scenario. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: convert info timer to delayed_workGustavo F. Padovan1-9/+9
Another step of remove interrupt context from Bluetooth Core. Use the system workqueue. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: convert tx_task to workqueueGustavo F. Padovan3-18/+12
This should simplify Bluetooth core processing a lot. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Move command task to workqueueGustavo F. Padovan3-14/+14
As part of the moving on all the Bluetooth processing to Process context. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Don't disable tasklets to call hdev->notify()Gustavo F. Padovan2-16/+4
It's pointless, we aren't protecting anything since btusb_notify() schedules a work to run, then all it operation happens without protection. If protection is really needed here, we will fix it further. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: convert conn hash to RCUGustavo F. Padovan2-22/+31
Handling hci_conn_hash with RCU make us avoid some locking and disable tasklets. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Use RCU to manipulate chan_listGustavo F. Padovan2-10/+16
Instead of using tasklet_disable() to prevent acess to the channel use, we can use RCU and improve the performance of our code. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: convert chan_lock to mutexGustavo F. Padovan1-26/+26
spin lock doesn't fit ok anymore on the new code based on workqueues. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: move hci_task_lock to mutexGustavo F. Padovan1-9/+9
Now we can sleep in any path inside Bluetooth core, so mutex can make sense here. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Remove sk_backlog usage from L2CAPGustavo F. Padovan1-11/+1
We run everything in the same lock now. The backlog queue is useless now Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Don't use spin_lock socket lock anymoreGustavo F. Padovan1-46/+20
We now run everything in process context, so the mutex lock is the best option. But in some places we still need the bh_lock_sock() Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Move L2CAP timers to workqueueGustavo F. Padovan1-39/+31
L2CAP timers also need to run in process context. As the works in l2cap are small we are using the system worqueue. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: hci_conn_auto_accept() doesn't need lockingGustavo F. Padovan1-4/+0
It doesn't really touch any sensitive information about hdev. So no need to lock here. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Use delayed work for advertisiment cache timeoutGustavo F. Padovan2-7/+9
As HCI rx path is now done in process context it makes sense to do all the timer in process context as well. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 10:23:40 +0000