summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2011-12-15mac80211: refactor station state transitionsJohannes Berg8-30/+172
Station entries can have various states, the most important ones being auth, assoc and authorized. This patch prepares us for telling the driver about these states, we don't want to confuse drivers with strange transitions, so with this we enforce that they move in the right order between them (back and forth); some transitions might happen before the driver even knows about the station, but at least runtime transitions will be ordered correctly. As a consequence, IBSS and MESH stations will now have the ASSOC flag set (so they can transition to AUTHORIZED), and we can get rid of a special case in TX processing. When freeing a station, unwind the state so that other parts of the code (or drivers later) can rely on the transitions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15mac80211: use station mutex in configurationJohannes Berg1-6/+6
There's no need to use RCU here, we can just lock the station mutex instead. This allows the code to sleep, which is necessary for later patches. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15mac80211: remove duplicate TDLS peer verificationJohannes Berg1-14/+0
This is already checked in cfg80211, so no need to repeat the checks here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15cfg80211: validate nl80211 station handling betterJohannes Berg2-87/+120
The nl80211 station handling code is a bit messy and doesn't do a lot of validation. It seems like this could be an issue for drivers that don't use mac80211 to validate everything. As cfg80211 doesn't keep station state, move the validation of allowing supported_rates to change for TDLS only in station mode to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15nl80211: add TDLS peer flag to policyJohannes Berg1-0/+1
This was evidently missed in the TDLS patch (07ba55d7). Cc: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14NFC: Initial LLCP supportSamuel Ortiz9-2/+2321
This patch is an initial implementation for the NFC Logical Link Control protocol. It's also known as NFC peer to peer mode. This is a basic implementation as it lacks SDP (services Discovery Protocol), frames aggregation support, and frame rejecion parsing. Follow up patches will implement those missing features. This code has been tested against a Nexus S phone implementing LLCP 1.0. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14NFC: Set and get DEP general bytesSamuel Ortiz1-0/+18
Without an API for setting and getting the local and remote general bytes, drivers won't be able to properly establish a DEP link. This API also allows them to propagate the remote general bytes they get from the DEP link establishment up to the LLCP layer. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14NFC: Add a DEP link control netlink commandSamuel Ortiz3-0/+230
NFC-DEP (Data Exchange Protocol) is an NFC MAC layer. This command allows to enable and disable the DEP link on to which e.g. LLCP can run. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14NFC: Atomic socket allocationSamuel Ortiz1-1/+1
rawsock_create() is called with preemption disabled, so we should not sleep. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14NFC: Do not take the genl mutex from the netlink release notifierSamuel Ortiz1-2/+0
The netlink notifier is atomic so we must not sleep in that context. Also we know that Any netlink packets arriving to us will be purged when the notifier is called, so we don't need to take the mutex. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14NFC: Add tx skb allocation routineSamuel Ortiz2-8/+29
This is a factorization of the current rawsock tx skb allocation routine, as it will be used by the LLCP code. We also rename nfc_alloc_skb to nfc_alloc_recv_skb for consistency sake. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14NFC: Add function name to the NFC pr_fmt() routineSamuel Ortiz7-7/+7
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mac80211: free skb on error path of ieee80211_ibss_join()Simon Wunderlich1-0/+1
Our new return also created a memleak. The skb should be freed before returning an error. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14nl80211: accept testmode dump with netdevJohannes Berg1-19/+31
All nl80211 commands that need only the wiphy still allow identifying it by giving an interface index, except, as Kenny pointed out, the testmode dump support. Fix this by looking up the wiphy via the ifidx in this case as well. Tested-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14Merge branch 'master' of ↵John W. Linville2-46/+42
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-13mac80211: don't check sdata_running in vif notifierEliad Peller1-4/+1
The ip address of the vif can be set even before the vif is up. requiring the vif to be up in the vif notifier makes the notifer ignore this event, which causes wrong arp filter configuration later on. Reported-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13mac80211: configure BSS_CHANGED_ARP_FILTER on reconfigurationEliad Peller1-1/+2
Configure arp filtering on sta reconfiguration. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13mac80211: Do not request FIF_BCN_PRBRESP_PROMISC for HW scan.Dmitry TARNYAGIN1-3/+3
ieee80211_configure_filter code used local->scanning as a boolean value when it was a bit mask. Bits SCAN_COMPLETED, SCAN_ABORTED should not set FIF_BCN_PRBRESP_PROMISC filter. SCAN_HW_SCANNING should not set FIF_BCN_PRBRESP_PROMISC either, as there is no explicit filter configuration request from scan code. If a driver requires FIF_BCN_PRBRESP_PROMISC mode during HW scanning, it's up to the driver to temporary enable it. Similar mistake was fixed also in ieee80211_hw_config (power configuration code). Verified-by: Vitaly Wool <vitaly.wool@sonyericsson.com> Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13cfg80211: notify core hints that helps to restore regd settingsRajkumar Manoharan1-2/+14
Regulatory updates set by CORE are ignored for custom regulatory cards. Let us notify the changes to the driver, as some drivers uses core hint to restore its orig_* reg domain setting. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13mac80211: Make use of ieee80211_is_* functions in tx status pathHelmut Schaa1-10/+5
Use ieee80211_is_data, ieee80211_is_mgmt and ieee80211_is_first_frag in the tx status path. This makes the code easier to read and allows us to remove two local variables: frag and type. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13mac80211: Purge A-MPDU TX queues before station destructionsYogesh Ashok Powar2-0/+27
When a station leaves suddenly while ampdu traffic to that station is still running, there is a possibility that the ampdu pending queues are not freed due to a race condition leading to memory leaks. In '__sta_info_destroy' when we attempt to destroy the ampdu sessions in 'ieee80211_sta_tear_down_BA_sessions', the driver calls 'ieee80211_stop_tx_ba_cb_irqsafe' to delete the ampdu structures (tid_tx) and splice the pending queues and this job gets queued in sdata workqueue. However, the sta entry can get destroyed before the above work gets scheduled and hence the race. Purging the queues and freeing the tid_tx to avoid the leak. The better solution would be to fix the race, but that can be taken up in a separate patch. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13cfg80211: Fix race in bss timeoutVasanthakumar Thiagarajan3-28/+45
It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13mac80211: unlock on error path in ieee80211_ibss_join()Dan Carpenter1-1/+3
We recently introduced a new return here but it needs an unlock first. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-12nfc: signedness bug in __nci_request()Dan Carpenter1-1/+1
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS if interrupted so completion_rc needs to be signed. The current code probably returns -ETIMEDOUT if we hit this situation, but after this patch is applied it will return -ERESTARTSYS. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07wireless: disable wext sysfs by defaultJohannes Berg1-3/+4
This code has been on the list to remove for a long time, so disable it by default, add a warning to its Kconfig, and schedule it for removal in 3.5. The only known dependency, hal, has not required it since its 0.5.12 release, which was in early 2009 and hal has since been deprecated completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07mac80211: fix another race in aggregation startJohannes Berg1-45/+41
Emmanuel noticed that when mac80211 stops the queues for aggregation that can leave a packet pending. This packet will be given to the driver after the AMPDU callback, but as a non-aggregated packet which messes up the sequence number etc. I also noticed by looking at the code that if packets are being processed while we clear the WANT_START bit, they might see it cleared already and queue up on tid_tx->pending. If the driver then rejects the new aggregation session we leak the packet. Fix both of these issues by changing this code to not stop the queues at all. Instead, let packets queue up on the tid_tx->pending queue instead of letting them get to the driver, and add code to recover properly in case the driver rejects the session. (The patch looks large because it has to move two functions to before their new use.) Cc: stable@vger.kernel.org Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06mac80211: Remove WARN_ON in apply-ht-override logic.Ben Greear1-1/+3
AP interfaces routinely call this logic, so just silently return when this happens instead of splatting the kernel logs. Reported-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06mac80211: accept public action frames with mismatched BSSIDJohannes Berg1-3/+10
Arik's patch "mac80211: allow action frames with unknown BSSID in GO mode" allowed any action frames in P2P mode to go through, but only to cooked monitor interfaces as the IEEE80211_RX_RA_MATCH was still cleared. As a result my no-monitor patches broke invitation responses. Instead of allowing any action frames in P2P GO mode to go through with a wrong BSSID like that patch did, allow all public action frames. They will never be processed by mac80211, but can be reported via nl80211 then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06mac80211: fix retransmitJohannes Berg1-1/+4
This fixes another regression from my "pass all fragments to driver at once" patches -- if the packet is being retransmitted then we don't go through all handlers, but we still need to move it to the skbs list, otherwise we run into the first warning in __ieee80211_tx() and leak the skb. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06mac80211: Add HT operation modes for IBSSAlexander Simon7-12/+87
The HT mode is set by iw (previous patchsets). The interface is set into the specified HT mode. HT mode and capabilities are announced in beacons. If we add a station that uses HT also, the fastest matching HT mode will be used for transmission. That means if we are using HT40+ and we add a station running on HT40-, we would transfer at HT20. If we join an IBSS with HT40, but the secondary channel is not available, we will fall back into HT20 as well. Allow frame aggregation to start in IBSS mode. Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * remove implicit channel_type enum assumptions * use rate_control_rate_init() if channel type changed * remove channel flags check * activate HT IBSS feature support * slightly reword commit message * rebase on wireless-testing Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06mac80211: handle protection mode, RIFS and ADDBA for HT IBSSSimon Wunderlich3-0/+44
* Follow 802.11n-2009 9.13.3.1 for protection mode and ADDBA * Send ADDBA only to HT STAs - implement 11.5.1.1 partially Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06nl80211: Parse channel type attribute in an ibss join requestAlexander Simon2-7/+37
Prepare cfg80211 for IBSS HT: * extend cfg80211 ibss struct with channel_type * Check if extension channel can be used * Export can_beacon_sec_chan for use in mac80211 (will be called from ibss.c later). Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * fix cfg80211_can_beacon_ext_chan comment * remove implicit channel_type enum assumptions * remove radar channel flags check * add HT IBSS feature flag * reword commit message Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06Merge branch 'master' of ↵John W. Linville9-261/+746
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2011-12-06Merge branch 'master' of ↵John W. Linville3-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
2011-12-03Bluetooth: trivial: correct check for LMP versionAndrei Emeltchenko1-1/+1
Make sure that code match exactly what comment says about pre 1.2 bluetooth version. Since this is HCI detail lmp_ver changed to hci_ver. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-03Bluetooth: Remove magic bluetooth version numbersAndrei Emeltchenko2-4/+4
Use bluetooth names instead of BT SIG assigned numbers Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-03Merge branch 'master' of ↵Gustavo F. Padovan3-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
2011-12-03Bluetooth: Correct version check in hci_setupAndrei Emeltchenko1-1/+1
Check for hci_ver instead of lmp_ver Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Merge branch 'master' of ↵John W. Linville9-30/+98
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/libertas/cfg.c
2011-12-02Bluetooth: remove old codeAndrei Emeltchenko1-12/+0
Remove old code not touched for several years. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Bluetooth: LE Set Scan Parameter CommandAndre Guedes1-0/+10
This patch adds the parameter struct and the command complete event handler to the LE Set Scan Parameter HCI command. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Bluetooth: Add dev_flags to struct hci_devAndre Guedes2-0/+7
This patch adds the dev_flags field to struct hci_dev. This new flags variable should be used to define flags related to BR/EDR and/or LE controller itself. It should be used to define flags which represents states from the controller. The dev_flags is cleared in case the controller sends a Reset Command Complete Event to the host. Also, this patch adds the HCI_LE_SCAN flag which was created to track if the controller is performing LE scan or not. The flag is set/cleared when the controller starts/stops scanning. This is an initial effort to stop using hdev->flags to define internal flags since it is exported to userspace by an ioctl. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Bluetooth: Add HCI Read Flow Control Mode functionAndrei Emeltchenko1-0/+19
Upstream Code Aurora function with minor trivial fixes. Origin: git://codeaurora.org/kernel/msm.git Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-01Revert "mac80211: clear sta.drv_priv on reconfiguration"John W. Linville1-1/+0
This reverts commit f785d83a19bca326f79d127a413e35769afc0105. This was provoking WARNINGs from the iwlegacy drivers. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-01Bluetooth: Centralize SMP pairing failure handlingBrian Gix1-6/+16
Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-01Bluetooth: Cleanup blkcipher on SMP terminationBrian Gix1-1/+9
The blkcipher must be freed to avoid memory leak. Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-01Bluetooth: Add HCI User Passkey Req Evt handlingBrian Gix1-0/+58
Some MITM scenarios require handling of the User Passkey Request event, by querying the user, and passing the response back. Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-01Bluetooth: Add User Passkey Response handlingBrian Gix1-1/+73
For some MITM protection pairing scenarios, the user is required to enter or accept a 6 digit passkey. Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-30nfc: Remove function tracer like entry messagesJoe Perches5-63/+19
Logging messages that mimic function tracer enter/exit aren't necessary. Just remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-30nfc: Remove unused nfc_printk and nfc_<level> macrosJoe Perches2-26/+0
All uses have been removed, so killing what's not necessary. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 23:28:03 +0000