summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2019-06-29Merge tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds1-8/+8
Pull two more NFS client fixes from Anna Schumaker: "These are both stable fixes. One to calculate the correct client message length in the case of partial transmissions. And the other to set the proper TCP timeout for flexfiles" * tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O SUNRPC: Fix up calculation of client message length
2019-06-28SUNRPC: Fix up calculation of client message lengthTrond Myklebust1-8/+8
In the case where a record marker was used, xs_sendpages() needs to return the length of the payload + record marker so that we operate correctly in the case of a partial transmission. When the callers check return value, they therefore need to take into account the record marker length. Fixes: 06b5fc3ad94e ("Merge tag 'nfs-rdma-for-5.1-1'...") Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds16-28/+114
Pull networking fixes from David Miller: 1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi. 2) Fix TX completion to be finite, from Sergej Benilov. 3) Use register_pernet_device to avoid a dst leak in tipc, from Xin Long. 4) Double free of TX cleanup in Dirk van der Merwe. 5) Memory leak in packet_set_ring(), from Eric Dumazet. 6) Out of bounds read in qmi_wwan, from Bjørn Mork. 7) Fix iif used in mcast/bcast looped back packets, from Stephen Suryaputra. 8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits) af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET sctp: change to hold sk after auth shkey is created successfully ipv6: fix neighbour resolution with raw socket ipv6: constify rt6_nexthop() net: dsa: microchip: Use gpiod_set_value_cansleep() net: aquantia: fix vlans not working over bridged network ipv4: reset rt_iif for recirculated mcast/bcast out pkts team: Always enable vlan tx offload net/smc: Fix error path in smc_init net/smc: hold conns_lock before calling smc_lgr_register_conn() bonding: Always enable vlan tx offload net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down" ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop qmi_wwan: Fix out-of-bounds read tipc: check msg->req data len in tipc_nl_compat_bearer_disable net: macb: do not copy the mac address if NULL net/packet: fix memory leak in packet_set_ring() net/tls: fix page double free on TX cleanup net/sched: cbs: Fix error path of cbs_module_init tipc: change to use register_pernet_device ...
2019-06-26af_packet: Block execution of tasks waiting for transmit to complete in ↵Neil Horman2-3/+18
AF_PACKET When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26sctp: change to hold sk after auth shkey is created successfullyXin Long1-4/+4
Now in sctp_endpoint_init(), it holds the sk then creates auth shkey. But when the creation fails, it doesn't release the sk, which causes a sk defcnf leak, Here to fix it by only holding the sk when auth shkey is created successfully. Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.") Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ipv6: fix neighbour resolution with raw socketNicolas Dichtel1-1/+2
The scenario is the following: the user uses a raw socket to send an ipv6 packet, destinated to a not-connected network, and specify a connected nh. Here is the corresponding python script to reproduce this scenario: import socket IPPROTO_RAW = 255 send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW) # scapy # p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest() # str(p) req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00' send_s.sendto(req, ('fd00:175::2', 0, 0, 0)) fd00:175::/64 is a connected route and fd00:200::fa is not a connected host. With this scenario, the kernel starts by sending a NS to resolve fd00:175::2. When it receives the NA, it flushes its queue and try to send the initial packet. But instead of sending it, it sends another NS to resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If the user sends again the packet, it now uses the right nh (fd00:175::2). The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is :: because the associated route is a connected route, thus it uses the dst addr of the packet. Let's use rt6_nexthop() to choose the right nh. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ipv6: constify rt6_nexthop()Nicolas Dichtel3-4/+4
There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ipv4: reset rt_iif for recirculated mcast/bcast out pktsStephen Suryaputra2-0/+45
Multicast or broadcast egress packets have rt_iif set to the oif. These packets might be recirculated back as input and lookup to the raw sockets may fail because they are bound to the incoming interface (skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function returns rt_iif instead of skb_iif. Hence, the lookup fails. v2: Make it non vrf specific (David Ahern). Reword the changelog to reflect it. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net/smc: Fix error path in smc_initYueHaibing1-1/+4
If register_pernet_subsys success in smc_init, we should cleanup it in case any other error. Fixes: 64e28b52c7a6 (net/smc: add pnet table namespace support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net/smc: hold conns_lock before calling smc_lgr_register_conn()Huaping Zhou1-0/+3
After smc_lgr_create(), the newly created link group is added to smc_lgr_list, thus is accessible from other context. Although link group creation is serialized by smc_create_lgr_pending, the new link group may still be accessed concurrently. For example, if ib_device is no longer active, smc_ib_port_event_work() will call smc_port_terminate(), which in turn will call __smc_lgr_terminate() on every link group of this device. So conns_lock is required here. Signed-off-by: Huaping Zhou <zhp@smail.nju.edu.cn> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-25net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"Eiichi Tsukata1-1/+1
/proc/sys/net/ipv6/route/skip_notify_on_dev_down assumes given value to be 0 or 1. Use proc_dointvec_minmax instead of proc_dointvec. Fixes: 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message ondevice down") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-25ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loopStephen Suryaputra1-1/+1
In commit 19e4e768064a8 ("ipv4: Fix raw socket lookup for local traffic"), the dif argument to __raw_v4_lookup() is coming from the returned value of inet_iif() but the change was done only for the first lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex. Fixes: 19e4e768064a8 ("ipv4: Fix raw socket lookup for local traffic") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24tipc: check msg->req data len in tipc_nl_compat_bearer_disableXin Long1-3/+15
This patch is to fix an uninit-value issue, reported by syzbot: BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 memchr+0xce/0x110 lib/string.c:981 string_is_valid net/tipc/netlink_compat.c:176 [inline] tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449 __tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline] tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360 tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline] tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281 TLV_GET_DATA_LEN() may return a negtive int value, which will be used as size_t (becoming a big unsigned long) passed into memchr, cause this issue. Similar to what it does in tipc_nl_compat_bearer_enable(), this fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in tipc_nl_compat_bearer_disable(), as well as in tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). v1->v2: - add the missing Fixes tags per Eric's request. Fixes: 0762216c0ad2 ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable") Fixes: 8b66fee7f8ee ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats") Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24net/packet: fix memory leak in packet_set_ring()Eric Dumazet1-1/+2
syzbot found we can leak memory in packet_set_ring(), if user application provides buggy parameters. Fixes: 7f953ab2ba46 ("af_packet: TX_RING support for TPACKET_V3") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24net/tls: fix page double free on TX cleanupDirk van der Merwe1-1/+2
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records") a new path was introduced to cleanup partial records during sk_proto_close. This path does not handle the SW KTLS tx_list cleanup. This is unnecessary though since the free_resources calls for both SW and offload paths will cleanup a partial record. The visible effect is the following warning, but this bug also causes a page double free. WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110 RIP: 0010:sk_stream_kill_queues+0x103/0x110 RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007 RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270 RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007 R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0 Call Trace: inet_csk_destroy_sock+0x55/0x100 tcp_close+0x25d/0x400 ? tcp_check_oom+0x120/0x120 tls_sk_proto_close+0x127/0x1c0 inet_release+0x3c/0x60 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0xd8/0x210 task_work_run+0x84/0xa0 do_exit+0x2dc/0xb90 ? release_sock+0x43/0x90 do_group_exit+0x3a/0xa0 get_signal+0x295/0x720 do_signal+0x36/0x610 ? SYSC_recvfrom+0x11d/0x130 exit_to_usermode_loop+0x69/0xb0 do_syscall_64+0x173/0x180 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fe9b9abc10d RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430 RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080 R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000 Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-23net/sched: cbs: Fix error path of cbs_module_initYueHaibing1-2/+7
If register_qdisc fails, we should unregister netdevice notifier. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22tipc: change to use register_pernet_deviceXin Long1-6/+6
This patch is to fix a dst defcnt leak, which can be reproduced by doing: # ip net a c; ip net a s; modprobe tipc # ip net e s ip l a n eth1 type veth peer n eth1 netns c # ip net e c ip l s lo up; ip net e c ip l s eth1 up # ip net e s ip l s lo up; ip net e s ip l s eth1 up # ip net e c ip a a 1.1.1.2/8 dev eth1 # ip net e s ip a a 1.1.1.1/8 dev eth1 # ip net e c tipc b e m udp n u1 localip 1.1.1.2 # ip net e s tipc b e m udp n u1 localip 1.1.1.1 # ip net d c; ip net d s; rmmod tipc and it will get stuck and keep logging the error: unregister_netdevice: waiting for lo to become free. Usage count = 1 The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx path with udp_early_demux == 1, and this dst (eventually holding lo dev) can't be released as bearer's removal in tipc pernet .exit happens after lo dev's removal, default_device pernet .exit. "There are two distinct types of pernet_operations recognized: subsys and device. At creation all subsys init functions are called before device init functions, and at destruction all device exit functions are called before subsys exit function." So by calling register_pernet_device instead to register tipc_net_ops, the pernet .exit() will be invoked earlier than loopback dev's removal when a netns is being destroyed, as fou/gue does. Note that vxlan and geneve udp tunnels don't have this issue, as the udp sock is released in their device ndo_stop(). This fix is also necessary for tipc dst_cache, which will hold dsts on tx path and I will introduce in my next patch. Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22Bluetooth: Fix regression with minimum encryption key size alignmentMarcel Holtmann2-14/+37
When trying to align the minimum encryption key size requirement for Bluetooth connections, it turns out doing this in a central location in the HCI connection handling code is not possible. Original Bluetooth version up to 2.0 used a security model where the L2CAP service would enforce authentication and encryption. Starting with Bluetooth 2.1 and Secure Simple Pairing that model has changed into that the connection initiator is responsible for providing an encrypted ACL link before any L2CAP communication can happen. Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and before devices are causing a regression. The encryption key size check needs to be moved out of the HCI connection handling into the L2CAP channel setup. To achieve this, the current check inside hci_conn_security() has been moved into l2cap_check_enc_key_size() helper function and then called from four decisions point inside L2CAP to cover all combinations of Secure Simple Pairing enabled devices and device using legacy pairing and legacy service security model. Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643 Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds16-95/+96
Pull networking fixes from David Miller: 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume Nault. 2) Don't access the DDM interface unless the transceiver implements it in bnx2x, from Mauro S. M. Rodrigues. 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from JingYi Hou. 4) Sign extension overflow in lio_core, from Colin Ian King. 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski. 6) Fix epollout hang in hvsock, from Sunil Muthuswamy. 7) Fix regression in default fib6_type, from David Ahern. 8) Handle memory limits in tcp_fragment more appropriately, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits) tcp: refine memory limit test in tcp_fragment() inet: clear num_timeout reqsk_alloc() net: mvpp2: debugfs: Add pmap to fs dump ipv6: Default fib6_type to RTN_UNICAST when not set net: hns3: Fix inconsistent indenting net/af_iucv: always register net_device notifier net/af_iucv: build proper skbs for HiperTransport net/af_iucv: remove GFP_DMA restriction for HiperTransport net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() hvsock: fix epollout hang from race condition net/udp_gso: Allow TX timestamp with UDP GSO net: netem: fix use after free and double free with packet corruption net: netem: fix backlog accounting for corrupted GSO frames net: lio_core: fix potential sign-extension overflow on large shift tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL tun: wake up waitqueues after IFF_UP is set net: remove duplicate fetch in sock_getsockopt tipc: fix issues with early FAILOVER_MSG from peer ...
2019-06-21tcp: refine memory limit test in tcp_fragment()Eric Dumazet1-1/+2
tcp_fragment() might be called for skbs in the write queue. Memory limits might have been exceeded because tcp_sendmsg() only checks limits at full skb (64KB) boundaries. Therefore, we need to make sure tcp_fragment() wont punish applications that might have setup very low SO_SNDBUF values. Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21Merge tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds3-7/+3
Pull more NFS client fixes from Anna Schumaker: "These are mostly refcounting issues that people have found recently. The revert fixes a suspend recovery performance issue. - SUNRPC: Fix a credential refcount leak - Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE" - SUNRPC: Fix xps refcount imbalance on the error path - NFS4: Only set creation opendata if O_CREAT" * tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Fix a credential refcount leak Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE" net :sunrpc :clnt :Fix xps refcount imbalance on the error path NFS4: Only set creation opendata if O_CREAT
2019-06-21SUNRPC: Fix a credential refcount leakTrond Myklebust1-1/+0
All callers of __rpc_clone_client() pass in a value for args->cred, meaning that the credential gets assigned and referenced in the call to rpc_new_client(). Reported-by: Ido Schimmel <idosch@idosch.org> Fixes: 79caa5fad47c ("SUNRPC: Cache cred of process creating the rpc_client") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-21Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"Anna Schumaker2-6/+2
Jon Hunter reports: "I have been noticing intermittent failures with a system suspend test on some of our machines that have a NFS mounted root file-system. Bisecting this issue points to your commit 431235818bc3 ("SUNRPC: Declare RPC timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does appear to resolve the problem. The cause of the suspend failure appears to be a long delay observed sometimes when resuming from suspend, and this is causing our test to timeout." This reverts commit 431235818bc3a919ca7487500c67c3144feece80. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-21net :sunrpc :clnt :Fix xps refcount imbalance on the error pathLin Yi1-0/+1
rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget to release it before return, may lead to a memory leak. Signed-off-by: Lin Yi <teroincn@163.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds301-1287/+301
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-19inet: clear num_timeout reqsk_alloc()Eric Dumazet2-8/+0
KMSAN caught uninit-value in tcp_create_openreq_child() [1] This is caused by a recent change, combined by the fact that TCP cleared num_timeout, num_retrans and sk fields only when a request socket was about to be queued. Under syncookie mode, a temporary request socket is used, and req->num_timeout could contain garbage. Lets clear these three fields sooner, there is really no point trying to defer this and risk other bugs. [1] BUG: KMSAN: uninit-value in tcp_create_openreq_child+0x157f/0x1cc0 net/ipv4/tcp_minisocks.c:526 CPU: 1 PID: 13357 Comm: syz-executor591 Not tainted 5.2.0-rc4+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x162/0x2d0 mm/kmsan/kmsan.c:611 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:304 tcp_create_openreq_child+0x157f/0x1cc0 net/ipv4/tcp_minisocks.c:526 tcp_v6_syn_recv_sock+0x761/0x2d80 net/ipv6/tcp_ipv6.c:1152 tcp_get_cookie_sock+0x16e/0x6b0 net/ipv4/syncookies.c:209 cookie_v6_check+0x27e0/0x29a0 net/ipv6/syncookies.c:252 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1039 [inline] tcp_v6_do_rcv+0xf1c/0x1ce0 net/ipv6/tcp_ipv6.c:1344 tcp_v6_rcv+0x60b7/0x6a30 net/ipv6/tcp_ipv6.c:1554 ip6_protocol_deliver_rcu+0x1433/0x22f0 net/ipv6/ip6_input.c:397 ip6_input_finish net/ipv6/ip6_input.c:438 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_input+0x2af/0x340 net/ipv6/ip6_input.c:447 dst_input include/net/dst.h:439 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core net/core/dev.c:4981 [inline] __netif_receive_skb net/core/dev.c:5095 [inline] process_backlog+0x721/0x1410 net/core/dev.c:5906 napi_poll net/core/dev.c:6329 [inline] net_rx_action+0x738/0x1940 net/core/dev.c:6395 __do_softirq+0x4ad/0x858 kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1052 </IRQ> do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x199/0x1e0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:682 [inline] ip6_finish_output2+0x213f/0x2670 net/ipv6/ip6_output.c:117 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:150 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:167 dst_output include/net/dst.h:433 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_xmit+0x1f53/0x2650 net/ipv6/ip6_output.c:271 inet6_csk_xmit+0x3df/0x4f0 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x4076/0x5b40 net/ipv4/tcp_output.c:1156 tcp_transmit_skb net/ipv4/tcp_output.c:1172 [inline] tcp_write_xmit+0x39a9/0xa730 net/ipv4/tcp_output.c:2397 __tcp_push_pending_frames+0x124/0x4e0 net/ipv4/tcp_output.c:2573 tcp_send_fin+0xd43/0x1540 net/ipv4/tcp_output.c:3118 tcp_close+0x16ba/0x1860 net/ipv4/tcp.c:2403 inet_release+0x1f7/0x270 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:470 __sock_release net/socket.c:601 [inline] sock_close+0x156/0x490 net/socket.c:1273 __fput+0x4c9/0xba0 fs/file_table.c:280 ____fput+0x37/0x40 fs/file_table.c:313 task_work_run+0x22e/0x2a0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop arch/x86/entry/common.c:168 [inline] prepare_exit_to_usermode+0x39d/0x4d0 arch/x86/entry/common.c:199 syscall_return_slowpath+0x90/0x5c0 arch/x86/entry/common.c:279 do_syscall_64+0xe2/0xf0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x401d50 Code: 01 f0 ff ff 0f 83 40 0d 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d dd 8d 2d 00 00 75 14 b8 03 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 14 0d 00 00 c3 48 83 ec 08 e8 7a 02 00 00 RSP: 002b:00007fff1cf58cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000401d50 RDX: 000000000000001c RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000004a9050 R08: 0000000020000040 R09: 000000000000001c R10: 0000000020004004 R11: 0000000000000246 R12: 0000000000402ef0 R13: 0000000000402f80 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:201 [inline] kmsan_internal_poison_shadow+0x53/0xa0 mm/kmsan/kmsan.c:160 kmsan_kmalloc+0xa4/0x130 mm/kmsan/kmsan_hooks.c:177 kmem_cache_alloc+0x534/0xb00 mm/slub.c:2781 reqsk_alloc include/net/request_sock.h:84 [inline] inet_reqsk_alloc+0xa8/0x600 net/ipv4/tcp_input.c:6384 cookie_v6_check+0xadb/0x29a0 net/ipv6/syncookies.c:173 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1039 [inline] tcp_v6_do_rcv+0xf1c/0x1ce0 net/ipv6/tcp_ipv6.c:1344 tcp_v6_rcv+0x60b7/0x6a30 net/ipv6/tcp_ipv6.c:1554 ip6_protocol_deliver_rcu+0x1433/0x22f0 net/ipv6/ip6_input.c:397 ip6_input_finish net/ipv6/ip6_input.c:438 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_input+0x2af/0x340 net/ipv6/ip6_input.c:447 dst_input include/net/dst.h:439 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core net/core/dev.c:4981 [inline] __netif_receive_skb net/core/dev.c:5095 [inline] process_backlog+0x721/0x1410 net/core/dev.c:5906 napi_poll net/core/dev.c:6329 [inline] net_rx_action+0x738/0x1940 net/core/dev.c:6395 __do_softirq+0x4ad/0x858 kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1052 do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x199/0x1e0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:682 [inline] ip6_finish_output2+0x213f/0x2670 net/ipv6/ip6_output.c:117 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:150 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:167 dst_output include/net/dst.h:433 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ip6_xmit+0x1f53/0x2650 net/ipv6/ip6_output.c:271 inet6_csk_xmit+0x3df/0x4f0 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x4076/0x5b40 net/ipv4/tcp_output.c:1156 tcp_transmit_skb net/ipv4/tcp_output.c:1172 [inline] tcp_write_xmit+0x39a9/0xa730 net/ipv4/tcp_output.c:2397 __tcp_push_pending_frames+0x124/0x4e0 net/ipv4/tcp_output.c:2573 tcp_send_fin+0xd43/0x1540 net/ipv4/tcp_output.c:3118 tcp_close+0x16ba/0x1860 net/ipv4/tcp.c:2403 inet_release+0x1f7/0x270 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:470 __sock_release net/socket.c:601 [inline] sock_close+0x156/0x490 net/socket.c:1273 __fput+0x4c9/0xba0 fs/file_table.c:280 ____fput+0x37/0x40 fs/file_table.c:313 task_work_run+0x22e/0x2a0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop arch/x86/entry/common.c:168 [inline] prepare_exit_to_usermode+0x39d/0x4d0 arch/x86/entry/common.c:199 syscall_return_slowpath+0x90/0x5c0 arch/x86/entry/common.c:279 do_syscall_64+0xe2/0xf0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: 336c39a03151 ("tcp: undo init congestion window on false SYNACK timeout") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19ipv6: Default fib6_type to RTN_UNICAST when not setDavid Ahern1-1/+1
A user reported that routes are getting installed with type 0 (RTN_UNSPEC) where before the routes were RTN_UNICAST. One example is from accel-ppp which apparently still uses the ioctl interface and does not set rtmsg_type. Another is the netlink interface where ipv6 does not require rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/af_iucv: always register net_device notifierJulian Wiedmann1-7/+20
Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still open HiperTransport-based connections. For robust operation these connections require the af_iucv_netdev_notifier, so register it unconditionally. Also handle any error that register_netdevice_notifier() returns. Fixes: 9fbd87d41392 ("af_iucv: handle netdev events") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/af_iucv: build proper skbs for HiperTransportJulian Wiedmann1-5/+11
The HiperSockets-based transport path in af_iucv is still too closely entangled with qeth. With commit a647a02512ca ("s390/qeth: speed-up L3 IQD xmit"), the relevant xmit code in qeth has begun to use skb_cow_head(). So to avoid unnecessary skb head expansions, af_iucv must learn to 1) respect dev->needed_headroom when allocating skbs, and 2) drop the header reference before cloning the skb. While at it, also stop hard-coding the LL-header creation stage and just use the appropriate helper. Fixes: a647a02512ca ("s390/qeth: speed-up L3 IQD xmit") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net/af_iucv: remove GFP_DMA restriction for HiperTransportJulian Wiedmann1-1/+5
af_iucv sockets over z/VM IUCV require that their skbs are allocated in DMA memory. This restriction doesn't apply to connections over HiperSockets. So only set this limit for z/VM IUCV sockets, thereby increasing the likelihood that the large (and linear!) allocations for HiperTransport messages succeed. Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505Thomas Gleixner1-3/+1
Based on 1 normalized pattern(s): gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 58 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.556988620@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501Thomas Gleixner3-15/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation see readme and copying for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.060259192@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner283-1157/+283
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 484Thomas Gleixner3-6/+3
Based on 1 normalized pattern(s): this source code is licensed under general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081204.871734026@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482Thomas Gleixner2-4/+2
Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 53 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner7-89/+7
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230Thomas Gleixner1-3/+1
Based on 2 normalized pattern(s): this source code is licensed under the gnu general public license version 2 see the file copying for more details this source code is licensed under general public license version 2 see extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller3-14/+14
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Module autoload for masquerade and redirection does not work. 2) Leak in unqueued packets in nf_ct_frag6_queue(). Ignore duplicated fragments, pretend they are placed into the queue. Patches from Guillaume Nault. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18hvsock: fix epollout hang from race conditionSunil Muthuswamy1-31/+8
Currently, hvsock can enter into a state where epoll_wait on EPOLLOUT will not return even when the hvsock socket is writable, under some race condition. This can happen under the following sequence: - fd = socket(hvsocket) - fd_out = dup(fd) - fd_in = dup(fd) - start a writer thread that writes data to fd_out with a combination of epoll_wait(fd_out, EPOLLOUT) and - start a reader thread that reads data from fd_in with a combination of epoll_wait(fd_in, EPOLLIN) - On the host, there are two threads that are reading/writing data to the hvsocket stack: hvs_stream_has_space hvs_notify_poll_out vsock_poll sock_poll ep_poll Race condition: check for epollout from ep_poll(): assume no writable space in the socket hvs_stream_has_space() returns 0 check for epollin from ep_poll(): assume socket has some free space < HVS_PKT_LEN(HVS_SEND_BUF_SIZE) hvs_stream_has_space() will clear the channel pending send size host will not notify the guest because the pending send size has been cleared and so the hvsocket will never mark the socket writable Now, the EPOLLOUT will never return even if the socket write buffer is empty. The fix is to set the pending size to the default size and never change it. This way the host will always notify the guest whenever the writable space is bigger than the pending size. The host is already optimized to *only* notify the guest when the pending size threshold boundary is crossed and not everytime. This change also reduces the cpu usage somewhat since hv_stream_has_space() is in the hotpath of send: vsock_stream_sendmsg()->hv_stream_has_space() Earlier hv_stream_has_space was setting/clearing the pending size on every call. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18net/udp_gso: Allow TX timestamp with UDP GSOFred Klassen1-0/+5
Fixes an issue where TX Timestamps are not arriving on the error queue when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING. This can be illustrated with an updated updgso_bench_tx program which includes the '-T' option to test for this condition. It also introduces the '-P' option which will call poll() before reading the error queue. ./udpgso_bench_tx -4ucTPv -S 1472 -l2 -D 172.16.120.18 poll timeout udp tx: 0 MB/s 1 calls/s 1 msg/s The "poll timeout" message above indicates that TX timestamp never arrived. This patch preserves tx_flags for the first UDP GSO segment. Only the first segment is timestamped, even though in some cases there may be benefital in timestamping both the first and last segment. Factors in deciding on first segment timestamp only: - Timestamping both first and last segmented is not feasible. Hardware can only have one outstanding TS request at a time. - Timestamping last segment may under report network latency of the previous segments. Even though the doorbell is suppressed, the ring producer counter has been incremented. - Timestamping the first segment has the upside in that it reports timestamps from the application's view, e.g. RTT. - Timestamping the first segment has the downside that it may underreport tx host network latency. It appears that we have to pick one or the other. And possibly follow-up with a config flag to choose behavior. v2: Remove tests as noted by Willem de Bruijn <willemb@google.com> Moving tests from net to net-next v3: Update only relevant tx_flag bits as per Willem de Bruijn <willemb@google.com> v4: Update comments and commit message as per Willem de Bruijn <willemb@google.com> Fixes: ee80d1ebe5ba ("udp: add udp gso") Signed-off-by: Fred Klassen <fklassen@appneta.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18net: netem: fix use after free and double free with packet corruptionJakub Kicinski1-8/+7
Brendan reports that the use of netem's packet corruption capability leads to strange crashes. This seems to be caused by commit d66280b12bd7 ("net: netem: use a list in addition to rbtree") which uses skb->next pointer to construct a fast-path queue of in-order skbs. Packet corruption code has to invoke skb_gso_segment() in case of skbs in need of GSO. skb_gso_segment() returns a list of skbs. If next pointers of the skbs on that list do not get cleared fast path list may point to freed skbs or skbs which are also on the RB tree. Let's say skb gets segmented into 3 frames: A -> B -> C A gets hooked to the t_head t_tail list by tfifo_enqueue(), but it's next pointer didn't get cleared so we have: h t |/ A -> B -> C Now if B and C get also get enqueued successfully all is fine, because tfifo_enqueue() will overwrite the list in order. IOW: Enqueue B: h t | | A -> B C Enqueue C: h t | | A -> B -> C But if B and C get reordered we may end up with: h t RB tree |/ | A -> B -> C B \ C Or if they get dropped just: h t |/ A -> B -> C where A and B are already freed. To reproduce either limit has to be set low to cause freeing of segs or reorders have to happen (due to delay jitter). Note that we only have to mark the first segment as not on the list, "finish_segs" handling of other frags already does that. Another caveat is that qdisc_drop_all() still has to free all segments correctly in case of drop of first segment, therefore we re-link segs before calling it. v2: - re-link before drop, v1 was leaking non-first segs if limit was hit at the first seg - better commit message which lead to discovering the above :) Reported-by: Brendan Galloway <brendan.galloway@netronome.com> Fixes: d66280b12bd7 ("net: netem: use a list in addition to rbtree") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18net: netem: fix backlog accounting for corrupted GSO framesJakub Kicinski1-5/+8
When GSO frame has to be corrupted netem uses skb_gso_segment() to produce the list of frames, and re-enqueues the segments one by one. The backlog length has to be adjusted to account for new frames. The current calculation is incorrect, leading to wrong backlog lengths in the parent qdisc (both bytes and packets), and incorrect packet backlog count in netem itself. Parent backlog goes negative, netem's packet backlog counts all non-first segments twice (thus remaining non-zero even after qdisc is emptied). Move the variables used to count the adjustment into local scope to make 100% sure they aren't used at any stage in backports. Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skbXin Long1-5/+3
udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device to count packets on dev->tstats, a perpcu variable. However, TIPC is using udp tunnel with no tunnel device, and pass the lower dev, like veth device that only initializes dev->lstats(a perpcu variable) when creating it. Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each pointer points to a bigger struct than lstats, so when tstats->tx_bytes is increased, other percpu variable's members could be overwritten. syzbot has reported quite a few crashes due to fib_nh_common percpu member 'nhc_pcpu_rth_output' overwritten, call traces are like: BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 __mkroute_output net/ipv4/route.c:2332 [inline] ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564 ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393 __ip_route_output_key include/net/route.h:125 [inline] ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651 ip_route_output_key include/net/route.h:135 [inline] ... or: kasan: GPF could be caused by NULL-ptr deref or user memory access RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168 <IRQ> rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline] free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217 __rcu_reclaim kernel/rcu/rcu.h:240 [inline] rcu_do_batch kernel/rcu/tree.c:2437 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline] rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697 ... The issue exists since tunnel stats update is moved to iptunnel_xmit by Commit 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()"), and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb so that the packets counting won't happen on dev->tstats. Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULLXin Long1-3/+6
iptunnel_xmit() works as a common function, also used by a udp tunnel which doesn't have to have a tunnel device, like how TIPC works with udp media. In these cases, we should allow not to count pkts on dev's tstats, so that udp tunnel can work with no tunnel device safely. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18net: remove duplicate fetch in sock_getsockoptJingYi Hou1-3/+0
In sock_getsockopt(), 'optlen' is fetched the first time from userspace. 'len < 0' is then checked. Then in condition 'SO_MEMINFO', 'optlen' is fetched the second time from userspace. If change it between two fetches may cause security problems or unexpected behaivor, and there is no reason to fetch it a second time. To fix this, we need to remove the second fetch. Signed-off-by: JingYi Hou <houjingyi647@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18tipc: fix issues with early FAILOVER_MSG from peerTuong Lien2-4/+7
It appears that a FAILOVER_MSG can come from peer even when the failure link is resetting (i.e. just after the 'node_write_unlock()'...). This means the failover procedure on the node has not been started yet. The situation is as follows: node1 node2 linkb linka linka linkb | | | | | | x failure | | | RESETTING | | | | | | x failure RESET | | RESETTING FAILINGOVER | | | (FAILOVER_MSG) | | |<-------------------------------------------------| | *FAILINGOVER | | | | | (dummy FAILOVER_MSG) | | |------------------------------------------------->| | RESET | | FAILOVER_END | FAILINGOVER RESET | . . . . . . . . . . . . Once this happens, the link failover procedure will be triggered wrongly on the receiving node since the node isn't in FAILINGOVER state but then another link failover will be carried out. The consequences are: 1) A peer might get stuck in FAILINGOVER state because the 'sync_point' was set, reset and set incorrectly, the criteria to end the failover would not be met, it could keep waiting for a message that has already received. 2) The early FAILOVER_MSG(s) could be queued in the link failover deferdq but would be purged or not pulled out because the 'drop_point' was not set correctly. 3) The early FAILOVER_MSG(s) could be dropped too. 4) The dummy FAILOVER_MSG could make the peer leaving FAILINGOVER state shortly, but later on it would be restarted. The same situation can also happen when the link is in PEER_RESET state and a FAILOVER_MSG arrives. The commit resolves the issues by forcing the link down immediately, so the failover procedure will be started normally (which is the same as when receiving a FAILOVER_MSG and the link is in up state). Also, the function "tipc_node_link_failover()" is toughen to avoid such a situation from happening. Acked-by: Jon Maloy <jon.maloy@ericsson.se> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds51-108/+407
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-17Merge branch 'tcp-fixes'David S. Miller7-9/+42
Eric Dumazet says: ==================== tcp: make sack processing more robust Jonathan Looney brought to our attention multiple problems in TCP stack at the sender side. SACK processing can be abused by malicious peers to either cause overflows, or increase of memory usage. First two patches fix the immediate problems. Since the malicious peers abuse senders by advertizing a very small MSS in their SYN or SYNACK packet, the last two patches add a new sysctl so that admins can chose a higher limit for MSS clamping. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16lapb: fixed leak of control-blocks.Jeremy Sowden1-0/+1
lapb_register calls lapb_create_cb, which initializes the control- block's ref-count to one, and __lapb_insert_cb, which increments it when adding the new block to the list of blocks. lapb_unregister calls __lapb_remove_cb, which decrements the ref-count when removing control-block from the list of blocks, and calls lapb_put itself to decrement the ref-count before returning. However, lapb_unregister also calls __lapb_devtostruct to look up the right control-block for the given net_device, and __lapb_devtostruct also bumps the ref-count, which means that when lapb_unregister returns the ref-count is still 1 and the control-block is leaked. Call lapb_put after __lapb_devtostruct to fix leak. Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: David S. Miller <davem@davemloft.net>