summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2018-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds28-138/+218
Pull networking fixes from David Miller: 1) Unbalanced refcounting in TIPC, from Jon Maloy. 2) Only allow TCP_MD5SIG to be set on sockets in close or listen state. Once the connection is established it makes no sense to change this. From Eric Dumazet. 3) Missing attribute validation in neigh_dump_table(), also from Eric Dumazet. 4) Fix address comparisons in SCTP, from Xin Long. 5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller. 6) Fix tunnel refcounting in l2tp, from Guillaume Nault. 7) Fix double list insert in team driver, from Paolo Abeni. 8) af_vsock.ko module was accidently made unremovable, from Stefan Hajnoczi. 9) Fix reference to freed llc_sap object in llc stack, from Cong Wang. 10) Don't assume netdevice struct is DMA'able memory in virtio_net driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) net/smc: fix shutdown in state SMC_LISTEN bnxt_en: Fix memory fault in bnxt_ethtool_init() virtio_net: sparse annotation fix virtio_net: fix adding vids on big-endian virtio_net: split out ctrl buffer net: hns: Avoid action name truncation docs: ip-sysctl.txt: fix name of some ipv6 variables vmxnet3: fix incorrect dereference when rxvlan is disabled llc: hold llc_sap before release_sock() MAINTAINERS: Direct networking documentation changes to netdev atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit" net: qmi_wwan: add Wistron Neweb D19Q1 net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN" net: stmmac: Disable ACS Feature for GMAC >= 4 net: mvpp2: Fix DMA address mask size net: change the comment of dev_mc_init net: qualcomm: rmnet: Fix warning seen with fill_info tun: fix vlan packet truncation tipc: fix infinite loop when dumping link monitor summary tipc: fix use-after-free in tipc_nametbl_stop ...
2018-04-19net/smc: fix shutdown in state SMC_LISTENUrsula Braun1-6/+4
Calling shutdown with SHUT_RD and SHUT_RDWR for a listening SMC socket crashes, because commit 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") releases the internal clcsock in smc_close_active() and sets smc->clcsock to NULL. For SHUT_RD the smc_close_active() call is removed. For SHUT_RDWR the kernel_sock_shutdown() call is omitted, since the clcsock is already released. Fixes: 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19llc: hold llc_sap before release_sock()Cong Wang1-0/+7
syzbot reported we still access llc->sap in llc_backlog_rcv() after it is freed in llc_sap_remove_socket(): Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 llc_conn_ac_send_sabme_cmd_p_set_x+0x3a8/0x460 net/llc/llc_c_ac.c:785 llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline] llc_conn_service net/llc/llc_conn.c:400 [inline] llc_conn_state_process+0x4e1/0x13a0 net/llc/llc_conn.c:75 llc_backlog_rcv+0x195/0x1e0 net/llc/llc_conn.c:891 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x12f/0x3a0 net/core/sock.c:2335 release_sock+0xa4/0x2b0 net/core/sock.c:2850 llc_ui_release+0xc8/0x220 net/llc/af_llc.c:204 llc->sap is refcount'ed and llc_sap_remove_socket() is paired with llc_sap_add_socket(). This can be amended by holding its refcount before llc_sap_remove_socket() and releasing it after release_sock(). Reported-by: <syzbot+6e181fc95081c2cf9051@syzkaller.appspotmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"Colin Ian King1-1/+1
Trivial fix to spelling mistake Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: change the comment of dev_mc_initsunlianwen1-1/+1
The comment of dev_mc_init() is wrong. which use dev_mc_flush instead of dev_mc_init. Signed-off-by: Lianwen Sun <sunlw.fnst@cn.fujitsu.com Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18tipc: fix infinite loop when dumping link monitor summaryTung Nguyen2-8/+5
When configuring the number of used bearers to MAX_BEARER and issuing command "tipc link monitor summary", the command enters infinite loop in user space. This issue happens because function tipc_nl_node_dump_monitor() returns the wrong 'prev_bearer' value when all potential monitors have been scanned. The correct behavior is to always try to scan all monitors until either the netlink message is full, in which case we return the bearer identity of the affected monitor, or we continue through the whole bearer array until we can return MAX_BEARERS. This solution also caters for the case where there may be gaps in the bearer array. Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18tipc: fix use-after-free in tipc_nametbl_stopJon Maloy1-12/+17
When we delete a service item in tipc_nametbl_stop() we loop over all service ranges in the service's RB tree, and for each service range we loop over its pertaining publications while calling tipc_service_remove_publ() for each of them. However, tipc_service_remove_publ() has the side effect that it also removes the comprising service range item when there are no publications left. This leads to a "use-after-free" access when the inner loop continues to the next iteration, since the range item holding the list we are looping no longer exists. We fix this by moving the delete of the service range item outside the said function. Instead, we now let the two functions calling it test if the list is empty and perform the removal when that is the case. Reported-by: syzbot+d64b64afc55660106556@syzkaller.appspotmail.com Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17KEYS: DNS: limit the length of option stringsEric Biggers1-7/+5
Adding a dns_resolver key whose payload contains a very long option name resulted in that string being printed in full. This hit the WARN_ONCE() in set_precision() during the printk(), because printk() only supports a precision of up to 32767 bytes: precision 1000000 too large WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0 Fix it by limiting option strings (combined name + value) to a much more reasonable 128 bytes. The exact limit is arbitrary, but currently the only recognized option is formatted as "dnserror=%lu" which fits well within this limit. Also ratelimit the printks. Reproducer: perl -e 'print "#", "A" x 1000000, "\x00"' | keyctl padd dns_resolver desc @s This bug was found using syzkaller. Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multiToshiaki Makita1-1/+1
Syzkaller spotted an old bug which leads to reading skb beyond tail by 4 bytes on vlan tagged packets. This is caused because skb_vlan_tagged_multi() did not check skb_headlen. BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline] BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline] BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline] BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 eth_type_vlan include/linux/if_vlan.h:283 [inline] skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] vlan_features_check include/linux/if_vlan.h:672 [inline] dflt_features_check net/core/dev.c:2949 [inline] netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084 __dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43ffa9 RSP: 002b:00007fff2cff3948 EFLAGS: 00000217 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043ffa9 RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004018d0 R13: 0000000000401960 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.") Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net: qrtr: add MODULE_ALIAS_NETPROTO macroNicolas Dechesne1-0/+1
To ensure that qrtr can be loaded automatically, when needed, if it is compiled as module. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17VSOCK: make af_vsock.ko removable againStefan Hajnoczi1-0/+6
Commit c1eef220c1760762753b602c382127bfccee226d ("vsock: always call vsock_init_tables()") introduced a module_init() function without a corresponding module_exit() function. Modules with an init function can only be removed if they also have an exit function. Therefore the vsock module was considered "permanent" and could not be removed. This patch adds an empty module_exit() function so that "rmmod vsock" works. No explicit cleanup is required because: 1. Transports call vsock_core_exit() upon exit and cannot be removed while sockets are still alive. 2. vsock_diag.ko does not perform any action that requires cleanup by vsock.ko. Fixes: c1eef220c176 ("vsock: always call vsock_init_tables()") Reported-by: Xiumei Mu <xmu@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16tipc: fix possible crash in __tipc_nl_net_set()Eric Dumazet2-0/+4
syzbot reported a crash in __tipc_nl_net_set() caused by NULL dereference. We need to check that both TIPC_NLA_NET_NODEID and TIPC_NLA_NET_NODEID_W1 are present. We also need to make sure userland provided u64 attributes. Fixes: d50ccc2d3909 ("tipc: add 128-bit node identifier") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16tipc: add policy for TIPC_NLA_NET_ADDREric Dumazet1-1/+2
Before syzbot/KMSAN bites, add the missing policy for TIPC_NLA_NET_ADDR Fixes: 27c21416727a ("tipc: add net set to new netlink api") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: Fix one possible memleak in ip_setup_corkGao Feng1-3/+5
It would allocate memory in this function when the cork->opt is NULL. But the memory isn't freed if failed in the latter rt check, and return error directly. It causes the memleak if its caller is ip_make_skb which also doesn't free the cork->opt when meet a error. Now move the rt check ahead to avoid the memleak. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: af_packet: fix race in PACKET_{R|T}X_RINGEric Dumazet1-9/+14
In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16tcp: clear tp->packets_out when purging write queueSoheil Hassas Yeganeh1-1/+1
Clear tp->packets_out when purging the write queue, otherwise tcp_rearm_rto() mistakenly assumes TCP write queue is not empty. This results in NULL pointer dereference. Also, remove the redundant `tp->packets_out = 0` from tcp_disconnect(), since tcp_disconnect() calls tcp_write_queue_purge(). Fixes: a27fd7a8ed38 (tcp: purge write queue upon RST) Reported-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com> Tested-by: Sami Farin <hvtaifwkbgefbaei@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-15rpc_pipefs: fix double-dput()Al Viro1-0/+1
if we ever hit rpc_gssd_dummy_depopulate() dentry passed to it has refcount equal to 1. __rpc_rmpipe() drops it and dput() done after that hits an already freed dentry. Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15Merge tag 'kbuild-v4.17-2' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables
2018-04-13l2tp: hold reference on tunnels printed in l2tp/tunnels debugfs fileGuillaume Nault3-23/+13
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe against concurrent tunnel deletion. Use the same mechanism as in l2tp_ppp.c for dropping the reference taken by l2tp_tunnel_get_nth(). That is, drop the reference just before looking up the next tunnel. In case of error, drop the last accessed tunnel in l2tp_dfs_seq_stop(). That was the last use of l2tp_tunnel_find_nth(). Fixes: 0ad6614048cf ("l2tp: Add debugfs files for dumping l2tp debug info") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-13l2tp: hold reference on tunnels printed in pppol2tp proc fileGuillaume Nault1-7/+17
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe against concurrent tunnel deletion. Unlike sessions, we can't drop the reference held on tunnels in pppol2tp_seq_show(). Tunnels are reused across several calls to pppol2tp_seq_start() when iterating over sessions. These iterations need the tunnel for accessing the next session. Therefore the only safe moment for dropping the reference is just before searching for the next tunnel. Normally, the last invocation of pppol2tp_next_tunnel() doesn't find any new tunnel, so it drops the last tunnel without taking any new reference. However, in case of error, pppol2tp_seq_stop() is called directly, so we have to drop the reference there. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-13l2tp: hold reference on tunnels in netlink dumpsGuillaume Nault3-3/+30
l2tp_tunnel_find_nth() is unsafe: no reference is held on the returned tunnel, therefore it can be freed whenever the caller uses it. This patch defines l2tp_tunnel_get_nth() which works similarly, but also takes a reference on the returned tunnel. The caller then has to drop it after it stops using the tunnel. Convert netlink dumps to make them safe against concurrent tunnel deletion. Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12net: fix deadlock while clearing neighbor proxy tableWolfgang Bumiller1-10/+18
When coming from ndisc_netdev_event() in net/ipv6/ndisc.c, neigh_ifdown() is called with &nd_tbl, locking this while clearing the proxy neighbor entries when eg. deleting an interface. Calling the table's pndisc_destructor() with the lock still held, however, can cause a deadlock: When a multicast listener is available an IGMP packet of type ICMPV6_MGM_REDUCTION may be sent out. When reaching ip6_finish_output2(), if no neighbor entry for the target address is found, __neigh_create() is called with &nd_tbl, which it'll want to lock. Move the elements into their own list, then unlock the table and perform the destruction. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199289 Fixes: 6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12sctp: do not check port in sctp_inet6_cmp_addrXin Long1-30/+30
pf->cmp_addr() is called before binding a v6 address to the sock. It should not check ports, like in sctp_inet_cmp_addr. But sctp_inet6_cmp_addr checks the addr by invoking af(6)->cmp_addr, sctp_v6_cmp_addr where it also compares the ports. This would cause that setsockopt(SCTP_SOCKOPT_BINDX_ADD) could bind multiple duplicated IPv6 addresses after Commit 40b4f0fd74e4 ("sctp: lack the check for ports in sctp_v6_cmp_addr"). This patch is to remove af->cmp_addr called in sctp_inet6_cmp_addr, but do the proper check for both v6 addrs and v4mapped addrs. v1->v2: - define __sctp_v6_cmp_addr to do the common address comparison used for both pf and af v6 cmp_addr. Fixes: 40b4f0fd74e4 ("sctp: lack the check for ports in sctp_v6_cmp_addr") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12tipc: fix missing initializer in tipc_sendmsg()Jon Maloy1-1/+3
The stack variable 'dnode' in __tipc_sendmsg() may theoretically end up tipc_node_get_mtu() as an unitilalized variable. We fix this by intializing the variable at declaration. We also add a default else clause to the two conditional ones already there, so that we never end up in the named function if the given address type is illegal. Reported-by: syzbot+b0975ce9355b347c1546@syzkaller.appspotmail.com Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12strparser: Fix incorrect strp->need_bytes value.Doron Roberts-Kedes1-4/+3
strp_data_ready resets strp->need_bytes to 0 if strp_peek_len indicates that the remainder of the message has been received. However, do_strp_work does not reset strp->need_bytes to 0. If do_strp_work completes a partial message, the value of strp->need_bytes will continue to reflect the needed bytes of the previous message, causing future invocations of strp_data_ready to return early if strp->need_bytes is less than strp_peek_len. Resetting strp->need_bytes to 0 in __strp_recv on handing a full message to the upper layer solves this problem. __strp_recv also calculates strp->need_bytes using stm->accum_len before stm->accum_len has been incremented by cand_len. This can cause strp->need_bytes to be equal to the full length of the message instead of the full length minus the accumulated length. This, in turn, causes strp_data_ready to return early, even when there is sufficient data to complete the partial message. Incrementing stm->accum_len before using it to calculate strp->need_bytes solves this problem. Found while testing net/tls_sw recv path. Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12net: validate attribute sizes in neigh_dump_table()Eric Dumazet1-4/+8
Since neigh_dump_table() calls nlmsg_parse() without giving policy constraints, attributes can have arbirary size that we must validate Reported by syzbot/KMSAN : BUG: KMSAN: uninit-value in neigh_master_filtered net/core/neighbour.c:2292 [inline] BUG: KMSAN: uninit-value in neigh_dump_table net/core/neighbour.c:2348 [inline] BUG: KMSAN: uninit-value in neigh_dump_info+0x1af0/0x2250 net/core/neighbour.c:2438 CPU: 1 PID: 3575 Comm: syzkaller268891 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 neigh_master_filtered net/core/neighbour.c:2292 [inline] neigh_dump_table net/core/neighbour.c:2348 [inline] neigh_dump_info+0x1af0/0x2250 net/core/neighbour.c:2438 netlink_dump+0x9ad/0x1540 net/netlink/af_netlink.c:2225 __netlink_dump_start+0x1167/0x12a0 net/netlink/af_netlink.c:2322 netlink_dump_start include/linux/netlink.h:214 [inline] rtnetlink_rcv_msg+0x1435/0x1560 net/core/rtnetlink.c:4598 netlink_rcv_skb+0x355/0x5f0 net/netlink/af_netlink.c:2447 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4653 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0x1672/0x1750 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43fed9 RSP: 002b:00007ffddbee2798 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fed9 RDX: 0000000000000000 RSI: 0000000020005000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401800 R13: 0000000000401890 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline] netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 21fdd092acc7 ("net: Add support for filtering neigh dump by master device") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established socketsEric Dumazet1-2/+4
syzbot/KMSAN reported an uninit-value in tcp_parse_options() [1] I believe this was caused by a TCP_MD5SIG being set on live flow. This is highly unexpected, since TCP option space is limited. For instance, presence of TCP MD5 option automatically disables TCP TimeStamp option at SYN/SYNACK time, which we can not do once flow has been established. Really, adding/deleting an MD5 key only makes sense on sockets in CLOSE or LISTEN state. [1] BUG: KMSAN: uninit-value in tcp_parse_options+0xd74/0x1a30 net/ipv4/tcp_input.c:3720 CPU: 1 PID: 6177 Comm: syzkaller192004 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 tcp_parse_options+0xd74/0x1a30 net/ipv4/tcp_input.c:3720 tcp_fast_parse_options net/ipv4/tcp_input.c:3858 [inline] tcp_validate_incoming+0x4f1/0x2790 net/ipv4/tcp_input.c:5184 tcp_rcv_established+0xf60/0x2bb0 net/ipv4/tcp_input.c:5453 tcp_v4_do_rcv+0x6cd/0xd90 net/ipv4/tcp_ipv4.c:1469 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_sendmsg+0xd6/0x100 net/ipv4/tcp.c:1464 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747 SyS_sendto+0x8a/0xb0 net/socket.c:1715 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x448fe9 RSP: 002b:00007fd472c64d38 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000006e5a30 RCX: 0000000000448fe9 RDX: 000000000000029f RSI: 0000000020a88f88 RDI: 0000000000000004 RBP: 00000000006e5a34 R08: 0000000020e68000 R09: 0000000000000010 R10: 00000000200007fd R11: 0000000000000216 R12: 0000000000000000 R13: 00007fff074899ef R14: 00007fd472c659c0 R15: 0000000000000009 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] tcp_send_ack+0x18c/0x910 net/ipv4/tcp_output.c:3624 __tcp_ack_snd_check net/ipv4/tcp_input.c:5040 [inline] tcp_ack_snd_check net/ipv4/tcp_input.c:5053 [inline] tcp_rcv_established+0x2103/0x2bb0 net/ipv4/tcp_input.c:5469 tcp_v4_do_rcv+0x6cd/0xd90 net/ipv4/tcp_ipv4.c:1469 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_sendmsg+0xd6/0x100 net/ipv4/tcp.c:1464 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747 SyS_sendto+0x8a/0xb0 net/socket.c:1715 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12tipc: fix unbalanced reference counterJon Maloy3-3/+9
When a topology subscription is created, we may encounter (or KASAN may provoke) a failure to create a corresponding service instance in the binding table. Instead of letting the tipc_nametbl_subscribe() report the failure back to the caller, the function just makes a warning printout and returns, without incrementing the subscription reference counter as expected by the caller. This makes the caller believe that the subscription was successful, so it will at a later moment try to unsubscribe the item. This involves a sub_put() call. Since the reference counter never was incremented in the first place, we get a premature delete of the subscription item, followed by a "use-after-free" warning. We fix this by adding a return value to tipc_nametbl_subscribe() and make the caller aware of the failure to subscribe. This bug seems to always have been around, but this fix only applies back to the commit shown below. Given the low risk of this happening we believe this to be sufficient. Fixes: commit 218527fe27ad ("tipc: replace name table service range array with rb tree") Reported-by: syzbot+aa245f26d42b8305d157@syzkaller.appspotmail.com Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12net/tls: Remove VLA usageKees Cook1-1/+9
In the quest to remove VLAs from the kernel[1], this replaces the VLA size with the only possible size used in the code, and adds a mechanism to double-check future IV sizes. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12Merge tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds14-116/+240
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Fix corner cases when handling device removal # v4.12+ - xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+ Features: - New sunrpc tracepoint for RPC pings - Finer grained NFSv4 attribute checking - Don't unnecessarily return NFS v4 delegations Other bugfixes and cleanups: - Several other small NFSoRDMA cleanups - Improvements to the sunrpc RTT measurements - A few sunrpc tracepoint cleanups - Various fixes for NFS v4 lock notifications - Various sunrpc and NFS v4 XDR encoding cleanups - Switch to the ida_simple API - Fix NFSv4.1 exclusive create - Forget acl cache after setattr operation - Don't advance the nfs_entry readdir cookie if xdr decoding fails" * tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits) NFS: advance nfs_entry cookie only after decoding completes successfully NFSv3/acl: forget acl cache after setattr NFSv4.1: Fix exclusive create NFSv4: Declare the size up to date after it was set. nfs: Use ida_simple API NFSv4: Fix the nfs_inode_set_delegation() arguments NFSv4: Clean up CB_GETATTR encoding NFSv4: Don't ask for attributes when ACCESS is protected by a delegation NFSv4: Add a helper to encode/decode struct timespec NFSv4: Clean up encode_attrs NFSv4; Clean up XDR encoding of type bitmap4 NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group SUNRPC: Add a helper for encoding opaque data inline SUNRPC: Add helpers for decoding opaque and string types NFSv4: Ignore change attribute invalidations if we hold a delegation NFS: More fine grained attribute tracking NFS: Don't force unnecessary cache invalidation in nfs_update_inode() NFS: Don't redirty the attribute cache in nfs_wcc_update_inode() NFS: Don't force a revalidation of all attributes if change is missing NFS: Convert NFS_INO_INVALID flags to unsigned long ...
2018-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds6-142/+139
Pull networking fixes from David Miller: 1) In ip_gre tunnel, handle the conflict between TUNNEL_{SEQ,CSUM} and GSO/LLTX properly. From Sabrina Dubroca. 2) Stop properly on error in lan78xx_read_otp(), from Phil Elwell. 3) Don't uncompress in slip before rstate is initialized, from Tejaswi Tanikella. 4) When using 1.x firmware on aquantia, issue a deinit before we hardware reset the chip, otherwise we break dirty wake WOL. From Igor Russkikh. 5) Correct log check in vhost_vq_access_ok(), from Stefan Hajnoczi. 6) Fix ethtool -x crashes in bnxt_en, from Michael Chan. 7) Fix races in l2tp tunnel creation and duplicate tunnel detection, from Guillaume Nault. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) l2tp: fix race in duplicate tunnel detection l2tp: fix races in tunnel creation tun: send netlink notification when the device is modified tun: set the flags before registering the netdevice lan78xx: Don't reset the interface on open bnxt_en: Fix NULL pointer dereference at bnxt_free_irq(). bnxt_en: Need to include RDMA rings in bnxt_check_rings(). bnxt_en: Support max-mtu with VF-reps bnxt_en: Ignore src port field in decap filter nodes bnxt_en: do not allow wildcard matches for L2 flows bnxt_en: Fix ethtool -x crash when device is down. vhost: return bool from *_access_ok() functions vhost: fix vhost_vq_access_ok() log check vhost: Fix vhost_copy_to_user() net: aquantia: oops when shutdown on already stopped device net: aquantia: Regression on reset with 1.x firmware cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN slip: Check if rstate is initialized before uncompressing lan78xx: Avoid spurious kevent 4 "error" lan78xx: Correctly indicate invalid OTP ...
2018-04-11l2tp: fix race in duplicate tunnel detectionGuillaume Nault3-28/+14
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create() from creating a duplicate tunnel. A tunnel can be concurrently registered after l2tp_tunnel_find() returns. Therefore, searching for duplicates must be done at registration time. Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere anymore. Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11l2tp: fix races in tunnel creationGuillaume Nault4-110/+110
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel list and sets the socket's ->sk_user_data field, before returning it to the caller. Therefore, there are two ways the tunnel can be accessed and freed, before the caller even had the opportunity to take a reference. In practice, syzbot could crash the module by closing the socket right after a new tunnel was returned to pppol2tp_create(). This patch moves tunnel registration out of l2tp_tunnel_create(), so that the caller can safely hold a reference before publishing the tunnel. This second step is done with the new l2tp_tunnel_register() function, which is now responsible for associating the tunnel to its socket and for inserting it into the namespace's list. While moving the code to l2tp_tunnel_register(), a few modifications have been done. First, the socket validation tests are done in a helper function, for clarity. Also, modifying the socket is now done after having inserted the tunnel to the namespace's tunnels list. This will allow insertion to fail, without having to revert theses modifications in the error path (a followup patch will check for duplicate tunnels before insertion). Either the socket is a kernel socket which we control, or it is a user-space socket for which we have a reference on the file descriptor. In any case, the socket isn't going to be closed from under us. Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11rds: MP-RDS may use an invalid c_pathKa-Cheong Poon1-5/+10
rds_sendmsg() calls rds_send_mprds_hash() to find a c_path to use to send a message. Suppose the RDS connection is not yet up. In rds_send_mprds_hash(), it does if (conn->c_npaths == 0) wait_event_interruptible(conn->c_hs_waitq, (conn->c_npaths != 0)); If it is interrupted before the connection is set up, rds_send_mprds_hash() will return a non-zero hash value. Hence rds_sendmsg() will use a non-zero c_path to send the message. But if the RDS connection ends up to be non-MP capable, the message will be lost as only the zero c_path can be used. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-10SUNRPC: Add helpers for decoding opaque and string typesTrond Myklebust1-0/+82
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Fix corner cases when handling device removalChuck Lever1-4/+9
Michal Kalderon has found some corner cases around device unload with active NFS mounts that I didn't have the imagination to test when xprtrdma device removal was added last year. - The ULP device removal handler is responsible for deallocating the PD. That wasn't clear to me initially, and my own testing suggested it was not necessary, but that is incorrect. - The transport destruction path can no longer assume that there is a valid ID. - When destroying a transport, ensure that ib_free_cq() is not invoked on a CQ that was already released. Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com> Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA from ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10sunrpc: Add static trace point to report result of RPC pingChuck Lever1-0/+6
This information can help track down local misconfiguration issues as well as network partitions and unresponsive servers. There are several ways to send a ping, and with transport multi- plexing, the exact rpc_xprt that is used is sometimes not known by the upper layer. The rpc_xprt pointer passed to the trace point call also has to be RCU-safe. I found a spot inside the client FSM where an rpc_xprt pointer is always available and safe to use. Suggested-by: Bill Baker <Bill.Baker@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10sunrpc: Add static trace point to report RPC latency statsChuck Lever1-5/+11
Introduce a low-overhead mechanism to report information about latencies of individual RPCs. The goal is to enable user space to filter the trace record for latency outliers, or build histograms, etc. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10sunrpc: Simplify synopsis of some trace pointsChuck Lever2-6/+6
Clean up: struct rpc_task carries a pointer to a struct rpc_clnt, and in fact task->tk_client is always what is passed into trace points that are already passing @task. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Make num_reqs a non-atomic integerChuck Lever1-8/+9
If recording xprt->stat.max_slots is moved into xprt_alloc_slot, then xprt->num_reqs is never manipulated outside xprt->reserve_lock. There's no longer a need for xprt->num_reqs to be atomic. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Make RTT measurement more precise (Send)Chuck Lever3-1/+4
Some RPC transports have more overhead in their send_request callouts than others. For example, for RPC-over-RDMA: - Marshaling an RPC often has to DMA map the RPC arguments - Registration methods perform memory registration as part of marshaling To capture just server and network latencies more precisely: when sending a Call, capture the rq_xtime timestamp _after_ the transport header has been marshaled. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Make RTT measurement more precise (Receive)Chuck Lever1-2/+3
Some RPC transports have more overhead in their reply handlers than others. For example, for RPC-over-RDMA: - RPC completion has to wait for memory invalidation, which is not a part of the server/network round trip - Recently a context switch was introduced into the reply handler, which further artificially inflates the measure of RPC RTT To capture just server and network latencies more precisely: when receiving a reply, compute the RTT as soon as the XID is recognized rather than at RPC completion time. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Move xprt_update_rtt callsiteChuck Lever2-3/+9
Since commit 33849792cbcd ("xprtrdma: Detect unreachable NFS/RDMA servers more reliably"), the xprtrdma transport now has a ->timer callout. But xprtrdma does not need to compute RTT data, only UDP needs that. Move the xprt_update_rtt call into the UDP transport implementation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Move creation of rl_rdmabuf to rpcrdma_create_reqChuck Lever3-34/+12
Refactor: Both rpcrdma_create_req call sites have to allocate the buffer where the transport header is built, so just move that allocation into rpcrdma_create_req. This buffer is a fixed size. There's no needed information available in call_allocate that is not also available when the transport is created. The original purpose for allocating these buffers on demand was to reduce the possibility that an allocation failure during transport creation will hork the mount operation during low memory scenarios. Some relief for this rare possibility is coming up in the next few patches. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Chain Send to FastReg WRsChuck Lever4-18/+49
With FRWR, the client transport can perform memory registration and post a Send with just a single ib_post_send. This reduces contention between the send_request path and the Send Completion handlers, and reduces the overhead of registering a chunk that has multiple segments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: "Support" call-only RPCsChuck Lever2-6/+6
RPC-over-RDMA version 1 credit accounting relies on there being a response message for every RPC Call. This means that RPC procedures that have no reply will disrupt credit accounting, just in the same way as a retransmit would (since it is sent because no reply has arrived). Deal with the "no reply" case the same way. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Reduce number of MRs created by rpcrdma_mrs_createChuck Lever1-1/+1
Create fewer MRs on average. Many workloads don't need as many as 32 MRs, and the transport can now quickly restock the MR free list. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: ->send_request returns -EAGAIN when there are no free MRsChuck Lever5-13/+27
Currently, when the MR free list is exhausted during marshaling, the RPC/RDMA transport places the RPC task on the delayq, which forces a wait for HZ >> 2 before the marshal and send is retried. With this change, the transport now places such an RPC task on the pending queue, and wakes it just as soon as more MRs have been created. Creating more MRs typically takes less than a millisecond, and this waking mechanism is less deadlock-prone. Moreover, the waiting RPC task is holding the transport's write lock, which blocks the transport from sending RPCs. Therefore faster recovery from MR exhaustion is desirable. This is the same mechanism that the TCP transport utilizes when handling write buffer space exhaustion. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Remove xprt-specific connect cookieChuck Lever3-6/+3
Clean up: The generic rq_connect_cookie is sufficient to detect RPC Call retransmission. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Remove arbitrary limit on initiator depthChuck Lever1-5/+2
Clean up: We need to check only that the value does not exceed the range of the u8 field it's going into. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>