summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller16-105/+157
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Disable BH while holding list spinlock in nf_conncount, from Taehee Yoo. 2) List corruption in nf_conncount, also from Taehee. 3) Fix race that results in leaving around an empty list node in nf_conncount, from Taehee Yoo. 4) Proper chain handling for inactive chains from the commit path, from Florian Westphal. This includes a selftest for this. 5) Do duplicate rule handles when replacing rules, also from Florian. 6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee. 7) Possible use-after-free in nft_compat when releasing extensions. From Florian. 8) Memory leak in xt_hashlimit, from Taehee. 9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long. 10) Fix cttimeout with udplite and gre, from Florian. 11) Preserve oif for IPv6 link-local generated traffic from mangle table, from Alin Nastac. 12) Missing error handling in masquerade notifiers, from Taehee Yoo. 13) Use mutex to protect registration/unregistration of masquerade extensions in order to prevent a race, from Taehee. 14) Incorrect condition check in tree_nodes_free(), also from Taehee. 15) Fix chain counter leak in rule replacement path, from Taehee. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28netfilter: nf_tables: deactivate expressions in rule replecement routineTaehee Yoo1-11/+4
There is no expression deactivation call from the rule replacement path, hence, chain counter is not decremented. A few steps to reproduce the problem: %nft add table ip filter %nft add chain ip filter c1 %nft add chain ip filter c1 %nft add rule ip filter c1 jump c2 %nft replace rule ip filter c1 handle 3 accept %nft flush ruleset <jump c2> expression means immediate NFT_JUMP to chain c2. Reference count of chain c2 is increased when the rule is added. When rule is deleted or replaced, the reference counter of c2 should be decreased via nft_rule_expr_deactivate() which calls nft_immediate_deactivate(). Splat looks like: [ 214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables] [ 214.398983] Modules linked in: nf_tables nfnetlink [ 214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44 [ 214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables] [ 214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8 [ 214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202 [ 214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0 [ 214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78 [ 214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000 [ 214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba [ 214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6 [ 214.398983] FS: 0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000 [ 214.398983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0 [ 214.398983] Call Trace: [ 214.398983] ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables] [ 214.398983] ? __kasan_slab_free+0x145/0x180 [ 214.398983] ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables] [ 214.398983] ? kfree+0xdb/0x280 [ 214.398983] nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables] [ ... ] Fixes: bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions") Reported by: Christoph Anton Mitterer <calestyo@scientia.net> Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505 Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791 Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-27tipc: fix lockdep warning during node deleteJon Maloy1-2/+5
We see the following lockdep warning: [ 2284.078521] ====================================================== [ 2284.078604] WARNING: possible circular locking dependency detected [ 2284.078604] 4.19.0+ #42 Tainted: G E [ 2284.078604] ------------------------------------------------------ [ 2284.078604] rmmod/254 is trying to acquire lock: [ 2284.078604] 00000000acd94e28 ((&n->timer)#2){+.-.}, at: del_timer_sync+0x5/0xa0 [ 2284.078604] [ 2284.078604] but task is already holding lock: [ 2284.078604] 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x190 [tipc] [ 2284.078604] [ 2284.078604] which lock already depends on the new lock. [ 2284.078604] [ 2284.078604] [ 2284.078604] the existing dependency chain (in reverse order) is: [ 2284.078604] [ 2284.078604] -> #1 (&(&tn->node_list_lock)->rlock){+.-.}: [ 2284.078604] tipc_node_timeout+0x20a/0x330 [tipc] [ 2284.078604] call_timer_fn+0xa1/0x280 [ 2284.078604] run_timer_softirq+0x1f2/0x4d0 [ 2284.078604] __do_softirq+0xfc/0x413 [ 2284.078604] irq_exit+0xb5/0xc0 [ 2284.078604] smp_apic_timer_interrupt+0xac/0x210 [ 2284.078604] apic_timer_interrupt+0xf/0x20 [ 2284.078604] default_idle+0x1c/0x140 [ 2284.078604] do_idle+0x1bc/0x280 [ 2284.078604] cpu_startup_entry+0x19/0x20 [ 2284.078604] start_secondary+0x187/0x1c0 [ 2284.078604] secondary_startup_64+0xa4/0xb0 [ 2284.078604] [ 2284.078604] -> #0 ((&n->timer)#2){+.-.}: [ 2284.078604] del_timer_sync+0x34/0xa0 [ 2284.078604] tipc_node_delete+0x1a/0x40 [tipc] [ 2284.078604] tipc_node_stop+0xcb/0x190 [tipc] [ 2284.078604] tipc_net_stop+0x154/0x170 [tipc] [ 2284.078604] tipc_exit_net+0x16/0x30 [tipc] [ 2284.078604] ops_exit_list.isra.8+0x36/0x70 [ 2284.078604] unregister_pernet_operations+0x87/0xd0 [ 2284.078604] unregister_pernet_subsys+0x1d/0x30 [ 2284.078604] tipc_exit+0x11/0x6f2 [tipc] [ 2284.078604] __x64_sys_delete_module+0x1df/0x240 [ 2284.078604] do_syscall_64+0x66/0x460 [ 2284.078604] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 2284.078604] [ 2284.078604] other info that might help us debug this: [ 2284.078604] [ 2284.078604] Possible unsafe locking scenario: [ 2284.078604] [ 2284.078604] CPU0 CPU1 [ 2284.078604] ---- ---- [ 2284.078604] lock(&(&tn->node_list_lock)->rlock); [ 2284.078604] lock((&n->timer)#2); [ 2284.078604] lock(&(&tn->node_list_lock)->rlock); [ 2284.078604] lock((&n->timer)#2); [ 2284.078604] [ 2284.078604] *** DEADLOCK *** [ 2284.078604] [ 2284.078604] 3 locks held by rmmod/254: [ 2284.078604] #0: 000000003368be9b (pernet_ops_rwsem){+.+.}, at: unregister_pernet_subsys+0x15/0x30 [ 2284.078604] #1: 0000000046ed9c86 (rtnl_mutex){+.+.}, at: tipc_net_stop+0x144/0x170 [tipc] [ 2284.078604] #2: 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x19 [...} The reason is that the node timer handler sometimes needs to delete a node which has been disconnected for too long. To do this, it grabs the lock 'node_list_lock', which may at the same time be held by the generic node cleanup function, tipc_node_stop(), during module removal. Since the latter is calling del_timer_sync() inside the same lock, we have a potential deadlock. We fix this letting the timer cleanup function use spin_trylock() instead of just spin_lock(), and when it fails to grab the lock it just returns so that the timer handler can terminate its execution. This is safe to do, since tipc_node_stop() anyway is about to delete both the timer and the node instance. Fixes: 6a939f365bdb ("tipc: Auto removal of peer down node instance") Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27sctp: increase sk_wmem_alloc when head->truesize is increasedXin Long1-0/+1
I changed to count sk_wmem_alloc by skb truesize instead of 1 to fix the sk_wmem_alloc leak caused by later truesize's change in xfrm in Commit 02968ccf0125 ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit"). But I should have also increased sk_wmem_alloc when head->truesize is increased in sctp_packet_gso_append() as xfrm does. Otherwise, sctp gso packet will cause sk_wmem_alloc underflow. Fixes: 02968ccf0125 ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27netfilter: nf_conncount: remove wrong condition check routineTaehee Yoo1-5/+2
All lists that reach the tree_nodes_free() function have both zero counter and true dead flag. The reason for this is that lists to be release are selected by nf_conncount_gc_list() which already decrements the list counter and sets on the dead flag. Therefore, this if statement in tree_nodes_free() is unnecessary and wrong. Fixes: 31568ec09ea0 ("netfilter: nf_conncount: fix list_del corruption in conn_free") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-27netfilter: nat: fix double register in masquerade modulesTaehee Yoo2-14/+32
There is a reference counter to ensure that masquerade modules register notifiers only once. However, the existing reference counter approach is not safe, test commands are: while : do modprobe ip6t_MASQUERADE & modprobe nft_masq_ipv6 & modprobe -rv ip6t_MASQUERADE & modprobe -rv nft_masq_ipv6 & done numbers below represent the reference counter. -------------------------------------------------------- CPU0 CPU1 CPU2 CPU3 CPU4 [insmod] [insmod] [rmmod] [rmmod] [insmod] -------------------------------------------------------- 0->1 register 1->2 returns 2->1 returns 1->0 0->1 register <-- unregister -------------------------------------------------------- The unregistation of CPU3 should be processed before the registration of CPU4. In order to fix this, use a mutex instead of reference counter. splat looks like: [ 323.869557] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [modprobe:1381] [ 323.869574] Modules linked in: nf_tables(+) nf_nat_ipv6(-) nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 n] [ 323.869574] irq event stamp: 194074 [ 323.898930] hardirqs last enabled at (194073): [<ffffffff90004a0d>] trace_hardirqs_on_thunk+0x1a/0x1c [ 323.898930] hardirqs last disabled at (194074): [<ffffffff90004a29>] trace_hardirqs_off_thunk+0x1a/0x1c [ 323.898930] softirqs last enabled at (182132): [<ffffffff922006ec>] __do_softirq+0x6ec/0xa3b [ 323.898930] softirqs last disabled at (182109): [<ffffffff90193426>] irq_exit+0x1a6/0x1e0 [ 323.898930] CPU: 0 PID: 1381 Comm: modprobe Not tainted 4.20.0-rc2+ #27 [ 323.898930] RIP: 0010:raw_notifier_chain_register+0xea/0x240 [ 323.898930] Code: 3c 03 0f 8e f2 00 00 00 44 3b 6b 10 7f 4d 49 bc 00 00 00 00 00 fc ff df eb 22 48 8d 7b 10 488 [ 323.898930] RSP: 0018:ffff888101597218 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 323.898930] RAX: 0000000000000000 RBX: ffffffffc04361c0 RCX: 0000000000000000 [ 323.898930] RDX: 1ffffffff26132ae RSI: ffffffffc04aa3c0 RDI: ffffffffc04361d0 [ 323.898930] RBP: ffffffffc04361c8 R08: 0000000000000000 R09: 0000000000000001 [ 323.898930] R10: ffff8881015972b0 R11: fffffbfff26132c4 R12: dffffc0000000000 [ 323.898930] R13: 0000000000000000 R14: 1ffff110202b2e44 R15: ffffffffc04aa3c0 [ 323.898930] FS: 00007f813ed41540(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 [ 323.898930] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 323.898930] CR2: 0000559bf2c9f120 CR3: 000000010bc80000 CR4: 00000000001006f0 [ 323.898930] Call Trace: [ 323.898930] ? atomic_notifier_chain_register+0x2d0/0x2d0 [ 323.898930] ? down_read+0x150/0x150 [ 323.898930] ? sched_clock_cpu+0x126/0x170 [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 323.898930] register_netdevice_notifier+0xbb/0x790 [ 323.898930] ? __dev_close_many+0x2d0/0x2d0 [ 323.898930] ? __mutex_unlock_slowpath+0x17f/0x740 [ 323.898930] ? wait_for_completion+0x710/0x710 [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 323.898930] ? up_write+0x6c/0x210 [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 324.127073] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 324.127073] nft_chain_filter_init+0x1e/0xe8a [nf_tables] [ 324.127073] nf_tables_module_init+0x37/0x92 [nf_tables] [ ... ] Fixes: 8dd33cc93ec9 ("netfilter: nf_nat: generalize IPv4 masquerading support for nf_tables") Fixes: be6b635cd674 ("netfilter: nf_nat: generalize IPv6 masquerading support for nf_tables") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-27netfilter: add missing error handling code for register functionsTaehee Yoo7-20/+61
register_{netdevice/inetaddr/inet6addr}_notifier may return an error value, this patch adds the code to handle these error paths. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-27netfilter: ipv6: Preserve link scope traffic original oifAlin Nastac1-1/+2
When ip6_route_me_harder is invoked, it resets outgoing interface of: - link-local scoped packets sent by neighbor discovery - multicast packets sent by MLD host - multicast packets send by MLD proxy daemon that sets outgoing interface through IPV6_PKTINFO ipi6_ifindex Link-local and multicast packets must keep their original oif after ip6_route_me_harder is called. Signed-off-by: Alin Nastac <alin.nastac@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-26netfilter: nfnetlink_cttimeout: fetch timeouts for udplite and gre, tooFlorian Westphal2-14/+15
syzbot was able to trigger the WARN in cttimeout_default_get() by passing UDPLITE as l4protocol. Alias UDPLITE to UDP, both use same timeout values. Furthermore, also fetch GRE timeouts. GRE is a bit more complicated, as it still can be a module and its netns_proto_gre struct layout isn't visible outside of the gre module. Can't move timeouts around, it appears conntrack sysctl unregister assumes net_generic() returns nf_proto_net, so we get crash. Expose layout of netns_proto_gre instead. A followup nf-next patch could make gre tracker be built-in as well if needed, its not that large. Last, make the WARN() mention the missing protocol value in case anything else is missing. Reported-by: syzbot+2fae8fa157dd92618cae@syzkaller.appspotmail.com Fixes: 8866df9264a3 ("netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattr") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-26ipvs: call ip_vs_dst_notifier earlier than ipv6_dev_notfXin Long1-0/+3
ip_vs_dst_event is supposed to clean up all dst used in ipvs' destinations when a net dev is going down. But it works only when the dst's dev is the same as the dev from the event. Now with the same priority but late registration, ip_vs_dst_notifier is always called later than ipv6_dev_notf where the dst's dev is set to lo for NETDEV_DOWN event. As the dst's dev lo is not the same as the dev from the event in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work. Also as these dst have to wait for dest_trash_timer to clean them up. It would cause some non-permanent kernel warnings: unregister_netdevice: waiting for br0 to become free. Usage count = 3 To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5. Note that for ipv4 route fib_netdev_notifier doesn't set dst's dev to lo in NETDEV_DOWN event, so this fix is only needed when IP_VS_IPV6 is defined. Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-3/+2
Daniel Borkmann says: ==================== pull-request: bpf 2018-11-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix an off-by-one bug when adjusting subprog start offsets after patching, from Edward. 2) Fix several bugs such as overflow in size allocation in queue / stack map creation, from Alexei. 3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp helper, from Andrey. 4) Fix several bugs in bpftool such as preventing an infinite loop in get_fdinfo, error handling and man page references, from Quentin. 5) Fix a warning in bpf_trace_printk() that wasn't catching an invalid format string, from Martynas. 6) Fix a bug in BPF cgroup local storage where non-atomic allocation was used in atomic context, from Roman. 7) Fix a NULL pointer dereference bug in bpftool from reallocarray() error handling, from Jakub and Wen. 8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools include infrastructure so that bpftool compiles on older RHEL7-like user space which does not ship these headers, from Yonghong. 9) Fix BPF kselftests for user space where to get ping test working with ping6 and ping -6, from Li. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24net: always initialize pagedlenWillem de Bruijn2-2/+4
In ip packet generation, pagedlen is initialized for each skb at the start of the loop in __ip(6)_append_data, before label alloc_new_skb. Depending on compiler options, code can be generated that jumps to this label, triggering use of an an uninitialized variable. In practice, at -O2, the generated code moves the initialization below the label. But the code should not rely on that for correctness. Fixes: 15e36f5b8e98 ("udp: paged allocation with gso") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24tcp: address problems caused by EDT misshapsEric Dumazet2-10/+16
When a qdisc setup including pacing FQ is dismantled and recreated, some TCP packets are sent earlier than instructed by TCP stack. TCP can be fooled when ACK comes back, because the following operation can return a negative value. tcp_time_stamp(tp) - tp->rx_opt.rcv_tsecr; Some paths in TCP stack were not dealing properly with this, this patch addresses four of them. Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds19-122/+193
Pull networking fixes from David Miller: 1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter. 2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann. 3) Fix socket wmem accounting in SCTP, from Xin Long. 4) Fix failed resume crash in ena driver, from Arthur Kiyanovski. 5) qed driver passes bytes instead of bits into second arg of bitmap_weight(). From Denis Bolotin. 6) Fix reset deadlock in ibmvnic, from Juliet Kim. 7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr Machata. 8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK compression during this period, from Eric Dumazet. 9) Add atomicity to SMC protocol cursor handling, from Ursula Braun. 10) Don't leave dangling error pointer if bpf_prog_add() fails in thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO headers, set sq->tso_hdrs to NULL. 11) Fix race condition over state variables in act_police, from Davide Caratti. 12) Disable guest csum in the presence of XDP in virtio_net, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits) net: gemini: Fix copy/paste error net: phy: mscc: fix deadlock in vsc85xx_default_config dt-bindings: dsa: Fix typo in "probed" net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue net: amd: add missing of_node_put() team: no need to do team_notify_peers or team_mcast_rejoin when disabling port virtio-net: fail XDP set if guest csum is negotiated virtio-net: disable guest csum during XDP set net/sched: act_police: add missing spinlock initialization net: don't keep lonely packets forever in the gro hash net/ipv6: re-do dad when interface has IFF_NOARP flag change packet: copy user buffers before orphan or clone ibmvnic: Update driver queues after change in ring size support ibmvnic: Fix RX queue buffer cleanup net: thunderx: set xdp_prog to NULL if bpf_prog_add fails net/dim: Update DIM start sample after each DIM iteration net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts net/smc: use after free fix in smc_wr_tx_put_slot() net/smc: atomic SMCD cursor handling net/smc: add SMC-D shutdown signal ...
2018-11-23Merge tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-clientLinus Torvalds1-3/+9
Pullk ceph fix from Ilya Dryomov: "A messenger fix, marked for stable" * tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-client: libceph: fall back to sendmsg for slab pages
2018-11-23net/sched: act_police: add missing spinlock initializationDavide Caratti1-0/+1
commit f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") introduces a new spinlock, but forgets its initialization. Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police' action is newly created, to avoid the following lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. <...> Call Trace: dump_stack+0x85/0xcb register_lock_class+0x581/0x590 __lock_acquire+0xd4/0x1330 ? tcf_police_init+0x2fa/0x650 [act_police] ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? tcf_police_init+0x2fa/0x650 [act_police] ? tcf_police_init+0x55a/0x650 [act_police] _raw_spin_lock_bh+0x34/0x40 ? tcf_police_init+0x2fa/0x650 [act_police] tcf_police_init+0x2fa/0x650 [act_police] tcf_action_init_1+0x384/0x4c0 tcf_action_init+0xf6/0x160 tcf_action_add+0x73/0x170 tc_ctl_action+0x122/0x160 rtnetlink_rcv_msg+0x2a4/0x490 ? netlink_deliver_tap+0x99/0x400 ? validate_linkmsg+0x370/0x370 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x196/0x230 netlink_sendmsg+0x2e5/0x3e0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x280/0x2f0 ? _raw_spin_unlock+0x24/0x30 ? handle_pte_fault+0xafe/0xf30 ? find_held_lock+0x2d/0x90 ? syscall_trace_enter+0x1df/0x360 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1841c7cf10 Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10 RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003 RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0 R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000 Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: don't keep lonely packets forever in the gro hashPaolo Abeni1-2/+5
Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/ipv6: re-do dad when interface has IFF_NOARP flag changeHangbin Liu1-6/+13
When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23packet: copy user buffers before orphan or cloneWillem de Bruijn1-2/+2
tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: use after free fix in smc_wr_tx_put_slot()Ursula Braun1-1/+3
In smc_wr_tx_put_slot() field pend->idx is used after being cleared. That means always idx 0 is cleared in the wr_tx_mask. This results in a broken administration of available WR send payload buffers. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: atomic SMCD cursor handlingUrsula Braun2-26/+60
Running uperf tests with SMCD on LPARs results in corrupted cursors. SMCD cursors should be treated atomically to fix cursor corruption. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: add SMC-D shutdown signalHans Wippel4-14/+43
When a SMC-D link group is freed, a shutdown signal should be sent to the peer to indicate that the link group is invalid. This patch adds the shutdown signal to the SMC code. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: use queue pair number when matching link groupKarsten Graul3-9/+12
When searching for an existing link group the queue pair number is also to be taken into consideration. When the SMC server sends a new number in a CLC packet (keeping all other values equal) then a new link group is to be created on the SMC client side. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net/smc: abort CLC connection in smc_releaseHans Wippel1-0/+2
In case of a non-blocking SMC socket, the initial CLC handshake is performed over a blocking TCP connection in a worker. If the SMC socket is released, smc_release has to wait for the blocking CLC socket operations (e.g., kernel_connect) inside the worker. This patch aborts a CLC connection when the respective non-blocking SMC socket is released to avoid waiting on socket operations or timeouts. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21tcp: defer SACK compression after DupThreshEric Dumazet3-6/+16
Jean-Louis reported a TCP regression and bisected to recent SACK compression. After a loss episode (receiver not able to keep up and dropping packets because its backlog is full), linux TCP stack is sending a single SACK (DUPACK). Sender waits a full RTO timer before recovering losses. While RFC 6675 says in section 5, "Algorithm Details", (2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true -- indicating at least three segments have arrived above the current cumulative acknowledgment point, which is taken to indicate loss -- go to step (4). ... (4) Invoke fast retransmit and enter loss recovery as follows: there are old TCP stacks not implementing this strategy, and still counting the dupacks before starting fast retransmit. While these stacks probably perform poorly when receivers implement LRO/GRO, we should be a little more gentle to them. This patch makes sure we do not enable SACK compression unless 3 dupacks have been sent since last rcv_nxt update. Ideally we should even rearm the timer to send one or two more DUPACK if no more packets are coming, but that will be work aiming for linux-4.21. Many thanks to Jean-Louis for bisecting the issue, providing packet captures and testing this patch. Fixes: 5d9f4262b7ea ("tcp: add SACK compression") Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Tested-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21net: skb_scrub_packet(): Scrub offload_fwd_markPetr Machata1-0/+5
When a packet is trapped and the corresponding SKB marked as already-forwarded, it retains this marking even after it is forwarded across veth links into another bridge. There, since it ingresses the bridge over veth, which doesn't have offload_fwd_mark, it triggers a warning in nbp_switchdev_frame_mark(). Then nbp_switchdev_allowed_egress() decides not to allow egress from this bridge through another veth, because the SKB is already marked, and the mark (of 0) of course matches. Thus the packet is incorrectly blocked. Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That function is called from tunnels and also from veth, and thus catches the cases where traffic is forwarded between bridges and transformed in a way that invalidates the marking. Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices") Fixes: abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field") Signed-off-by: Petr Machata <petrm@mellanox.com> Suggested-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net/sched: act_police: fix race condition on state variablesDavide Caratti1-14/+21
after 'police' configuration parameters were converted to use RCU instead of spinlock, the state variables used to compute the traffic rate (namely 'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in the traffic path without any protection. Use a dedicated spinlock to avoid race conditions on these variables, and ensure proper cache-line alignment. In this way, 'police' is still faster than what we observed when 'tcf_lock' was used in the traffic path _ i.e. reverting commit 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path"). Moreover, we preserve the throughput improvement that was obtained after 'police' started using per-cpu counters, when 'avrate' is used instead of 'rate'. Changes since v1 (thanks to Eric Dumazet): - call ktime_get_ns() before acquiring the lock in the traffic path - use a dedicated spinlock instead of tcf_lock - improve cache-line usage Fixes: 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path") Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com>
2018-11-20tcp: Fix SOF_TIMESTAMPING_RX_HARDWARE to use the latest timestamp during TCP ↵Stephen Mallon1-0/+1
coalescing During tcp coalescing ensure that the skb hardware timestamp refers to the highest sequence number data. Previously only the software timestamp was updated during coalescing. Signed-off-by: Stephen Mallon <stephen.mallon@sydney.edu.au> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19sctp: not increase stream's incnt before sending addstrm_in requestXin Long1-1/+0
Different from processing the addstrm_out request, The receiver handles an addstrm_in request by sending back an addstrm_out request to the sender who will increase its stream's in and incnt later. Now stream->incnt has been increased since it sent out the addstrm_in request in sctp_send_add_streams(), with the wrong stream->incnt will even cause crash when copying stream info from the old stream's in to the new one's in sctp_process_strreset_addstrm_out(). This patch is to fix it by simply removing the stream->incnt change from sctp_send_add_streams(). Fixes: 242bd2d519d7 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19Revert "sctp: remove sctp_transport_pmtu_check"Xin Long1-0/+3
This reverts commit 22d7be267eaa8114dcc28d66c1c347f667d7878a. The dst's mtu in transport can be updated by a non sctp place like in xfrm where the MTU information didn't get synced between asoc, transport and dst, so it is still needed to do the pmtu check in sctp_packet_config. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19sctp: not allow to set asoc prsctp_enable by sockoptXin Long1-21/+5
As rfc7496#section4.5 says about SCTP_PR_SUPPORTED: This socket option allows the enabling or disabling of the negotiation of PR-SCTP support for future associations. For existing associations, it allows one to query whether or not PR-SCTP support was negotiated on a particular association. It means only sctp sock's prsctp_enable can be set. Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux sctp in another patchset. v1->v2: - drop the params.assoc_id check as Neil suggested. Fixes: 28aa4c26fce2 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmitXin Long1-20/+1
Now sctp increases sk_wmem_alloc by 1 when doing set_owner_w for the skb allocked in sctp_packet_transmit and decreases by 1 when freeing this skb. But when this skb goes through networking stack, some subcomponents might change skb->truesize and add the same amount on sk_wmem_alloc. However sctp doesn't know the amount to decrease by, it would cause a leak on sk->sk_wmem_alloc and the sock can never be freed. Xiumei found this issue when it hit esp_output_head() by using sctp over ipsec, where skb->truesize is added and so is sk->sk_wmem_alloc. Since sctp has used sk_wmem_queued to count for writable space since Commit cd305c74b0f8 ("sctp: use sk_wmem_queued to check for writable space"), it's ok to fix it by counting sk_wmem_alloc by skb truesize in sctp_packet_transmit. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds17-63/+143
Pull networking fixes from David Miller: 1) Fix some potentially uninitialized variables and use-after-free in kvaser_usb can drier, from Jimmy Assarsson. 2) Fix leaks in qed driver, from Denis Bolotin. 3) Socket leak in l2tp, from Xin Long. 4) RSS context allocation fix in bnxt_en from Michael Chan. 5) Fix cxgb4 build errors, from Ganesh Goudar. 6) Route leaks in ipv6 when removing exceptions, from Xin Long. 7) Memory leak in IDR allocation handling of act_pedit, from Davide Caratti. 8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov. 9) When MTU is locked, do not force DF bit on ipv4 tunnels. From Sabrina Dubroca. 10) When NAPI cached skb is reused, we must set it to the proper initial state which includes skb->pkt_type. From Eric Dumazet. 11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy. 12) Set RX queue properly in various tuntap receive paths, from Matthew Cover. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tuntap: fix multiqueue rx ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF tipc: don't assume linear buffer when reading ancillary data tipc: fix lockdep warning when reinitilaizing sockets net-gro: reset skb->pkt_type in napi_reuse_skb() tc-testing: tdc.py: Guard against lack of returncode in executed command tc-testing: tdc.py: ignore errors when decoding stdout/stderr ip_tunnel: don't force DF when MTU is locked MAINTAINERS: Add entry for CAKE qdisc net: bridge: fix vlan stats use-after-free on destruction socket: do a generic_file_splice_read when proto_ops has no splice_read net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs" net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs net/sched: act_pedit: fix memory leak when IDR allocation fails net: lantiq: Fix returned value in case of error in 'xrx200_probe()' ipv6: fix a dst leak when removing its exception net: mvneta: Don't advertise 2.5G modes drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo net/mlx4: Fix UBSAN warning of signed integer overflow ...
2018-11-19libceph: fall back to sendmsg for slab pagesIlya Dryomov1-3/+9
skb_can_coalesce() allows coalescing neighboring slab objects into a single frag: return page == skb_frag_page(frag) && off == frag->page_offset + skb_frag_size(frag); ceph_tcp_sendpage() can be handed slab pages. One example of this is XFS: it passes down sector sized slab objects for its metadata I/O. If the kernel client is co-located on the OSD node, the skb may go through loopback and pop on the receive side with the exact same set of frags. When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy complains because the size exceeds the object's allocated size: usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes) Although skb_can_coalesce() could be taught to return false if the resulting frag would cross a slab object boundary, we already have a fallback for non-refcounted pages. Utilize it for slab pages too. Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-11-18ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRFDavid Ahern1-2/+5
Preethi reported that PMTU discovery for UDP/raw applications is not working in the presence of VRF when the socket is not bound to a device. The problem is that ip6_sk_update_pmtu does not consider the L3 domain of the skb device if the socket is not bound. Update the function to set oif to the L3 master device if relevant. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Reported-by: Preethi Ramachandra <preethir@juniper.net> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17tipc: don't assume linear buffer when reading ancillary dataJon Maloy1-4/+11
The code for reading ancillary data from a received buffer is assuming the buffer is linear. To make this assumption true we have to linearize the buffer before message data is read. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17tipc: fix lockdep warning when reinitilaizing socketsJon Maloy3-18/+48
We get the following warning: [ 47.926140] 32-bit node address hash set to 2010a0a [ 47.927202] [ 47.927433] ================================ [ 47.928050] WARNING: inconsistent lock state [ 47.928661] 4.19.0+ #37 Tainted: G E [ 47.929346] -------------------------------- [ 47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0 [ 47.930116] {SOFTIRQ-ON-W} state was registered at: [ 47.930116] _raw_spin_lock+0x29/0x60 [ 47.930116] rht_deferred_worker+0x556/0x810 [ 47.930116] process_one_work+0x1f5/0x540 [ 47.930116] worker_thread+0x64/0x3e0 [ 47.930116] kthread+0x112/0x150 [ 47.930116] ret_from_fork+0x3a/0x50 [ 47.930116] irq event stamp: 14044 [ 47.930116] hardirqs last enabled at (14044): [<ffffffff9a07fbba>] __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] hardirqs last disabled at (14043): [<ffffffff9a07fb81>] __local_bh_enable_ip+0x41/0xf0 [ 47.938117] softirqs last enabled at (14028): [<ffffffff9a0803ee>] irq_enter+0x5e/0x60 [ 47.938117] softirqs last disabled at (14029): [<ffffffff9a0804a5>] irq_exit+0xb5/0xc0 [ 47.938117] [ 47.938117] other info that might help us debug this: [ 47.938117] Possible unsafe locking scenario: [ 47.938117] [ 47.938117] CPU0 [ 47.938117] ---- [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] <Interrupt> [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] [ 47.938117] *** DEADLOCK *** [ 47.938117] [ 47.938117] 2 locks held by swapper/3/0: [ 47.938117] #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280 [ 47.938117] #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc] [ 47.938117] [ 47.938117] stack backtrace: [ 47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E 4.19.0+ #37 [ 47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 47.938117] Call Trace: [ 47.938117] <IRQ> [ 47.938117] dump_stack+0x5e/0x8b [ 47.938117] print_usage_bug+0x1ed/0x1ff [ 47.938117] mark_lock+0x5b5/0x630 [ 47.938117] __lock_acquire+0x4c0/0x18f0 [ 47.938117] ? lock_acquire+0xa6/0x180 [ 47.938117] lock_acquire+0xa6/0x180 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] _raw_spin_lock+0x29/0x60 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] rhashtable_walk_enter+0x36/0xb0 [ 47.938117] tipc_sk_reinit+0xb0/0x410 [tipc] [ 47.938117] ? mark_held_locks+0x6f/0x90 [ 47.938117] ? __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] ? lockdep_hardirqs_on+0x20/0x1a0 [ 47.938117] tipc_net_finalize+0xbf/0x180 [tipc] [ 47.938117] tipc_disc_timeout+0x509/0x540 [tipc] [ 47.938117] ? call_timer_fn+0x5/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] call_timer_fn+0xa1/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] run_timer_softirq+0x1f2/0x4d0 [ 47.938117] __do_softirq+0xfc/0x413 [ 47.938117] irq_exit+0xb5/0xc0 [ 47.938117] smp_apic_timer_interrupt+0xac/0x210 [ 47.938117] apic_timer_interrupt+0xf/0x20 [ 47.938117] </IRQ> [ 47.938117] RIP: 0010:default_idle+0x1c/0x140 [ 47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b [ 47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001 [ 47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200 [ 47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 [ 47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200 [ 47.938117] ? default_idle+0x1a/0x140 [ 47.938117] do_idle+0x1bc/0x280 [ 47.938117] cpu_startup_entry+0x19/0x20 [ 47.938117] start_secondary+0x187/0x1c0 [ 47.938117] secondary_startup_64+0xa4/0xb0 The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is calling the function rhashtable_walk_enter() within a timer interrupt. We fix this by executing tipc_net_finalize() in work queue context. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net-gro: reset skb->pkt_type in napi_reuse_skb()Eric Dumazet1-0/+4
eth_type_trans() assumes initial value for skb->pkt_type is PACKET_HOST. This is indeed the value right after a fresh skb allocation. However, it is possible that GRO merged a packet with a different value (like PACKET_OTHERHOST in case macvlan is used), so we need to make sure napi->skb will have pkt_type set back to PACKET_HOST. Otherwise, valid packets might be dropped by the stack because their pkt_type is not PACKET_HOST. napi_reuse_skb() was added in commit 96e93eab2033 ("gro: Add internal interfaces for VLAN"), but this bug always has been there. Fixes: 96e93eab2033 ("gro: Add internal interfaces for VLAN") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17ip_tunnel: don't force DF when MTU is lockedSabrina Dubroca1-1/+1
The various types of tunnels running over IPv4 can ask to set the DF bit to do PMTU discovery. However, PMTU discovery is subject to the threshold set by the net.ipv4.route.min_pmtu sysctl, and is also disabled on routes with "mtu lock". In those cases, we shouldn't set the DF bit. This patch makes setting the DF bit conditional on the route's MTU locking state. This issue seems to be older than git history. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net: bridge: fix vlan stats use-after-free on destructionNikolay Aleksandrov2-1/+9
Syzbot reported a use-after-free of the global vlan context on port vlan destruction. When I added per-port vlan stats I missed the fact that the global vlan context can be freed before the per-port vlan rcu callback. There're a few different ways to deal with this, I've chosen to add a new private flag that is set only when per-port stats are allocated so we can directly check it on destruction without dereferencing the global context at all. The new field in net_bridge_vlan uses a hole. v2: cosmetic change, move the check to br_process_vlan_info where the other checks are done v3: add change log in the patch, add private (in-kernel only) flags in a hole in net_bridge_vlan struct and use that instead of mixing user-space flags with private flags Fixes: 9163a0fc1f0c ("net: bridge: add support for per-port vlan stats") Reported-by: syzbot+04681da557a0e49a52e5@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17socket: do a generic_file_splice_read when proto_ops has no splice_readSlavomir Kaslev1-1/+1
splice(2) fails with -EINVAL when called reading on a socket with no splice_read set in its proto_ops (such as vsock sockets). Switch this to fallbacks to a generic_file_splice_read instead. Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17netfilter: xt_hashlimit: fix a possible memory leak in htable_create()Taehee Yoo1-6/+3
In the htable_create(), hinfo is allocated by vmalloc() So that if error occurred, hinfo should be freed. Fixes: 11d5f15723c9 ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-16Merge tag 'batadv-net-for-davem-20181114' of git://git.open-mesh.org/linux-mergeDavid S. Miller2-3/+5
Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - Explicitly pad short ELP packets with zeros, by Sven Eckelmann - Fix packet size calculation when merging fragments, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net/sched: act_pedit: fix memory leak when IDR allocation failsDavide Caratti1-1/+2
tcf_idr_check_alloc() can return a negative value, on allocation failures (-ENOMEM) or IDR exhaustion (-ENOSPC): don't leak keys_ex in these cases. Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16ipv6: fix a dst leak when removing its exceptionXin Long1-4/+3
These is no need to hold dst before calling rt6_remove_exception_rt(). The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(), which has been removed in Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"). Otherwise, it will cause a dst leak. This patch is to simply remove the dst_hold_safe() call before calling rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt(). It's safe, because the removal of the exception that holds its dst's refcnt is protected by rt6_exception_lock. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flowsEric Dumazet1-12/+19
When EDT conversion happened, fq lost the ability to enfore a maxrate for all flows. It kept it for non EDT flows. This commit restores the functionality. Tested: tc qd replace dev eth0 root fq maxrate 500Mbit netperf -P0 -H host -- -O THROUGHPUT 489.75 Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15rxrpc: Fix life checkDavid Howells1-4/+23
The life-checking function, which is used by kAFS to make sure that a call is still live in the event of a pending signal, only samples the received packet serial number counter; it doesn't actually provoke a change in the counter, rather relying on the server to happen to give us a packet in the time window. Fix this by adding a function to force a ping to be transmitted. kAFS then keeps track of whether there's been a stall, and if so, uses the new function to ping the server, resetting the timeout to allow the reply to come back. If there's a stall, a ping and the call is *still* stalled in the same place after another period, then the call will be aborted. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15Merge tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2-26/+43
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Don't exit the NFSv4 state manager without clearing NFS4CLNT_MANAGER_RUNNING Bugfixes: - Fix an Oops when destroying the RPCSEC_GSS credential cache - Fix an Oops during delegation callbacks - Ensure that the NFSv4 state manager exits the loop on SIGKILL - Fix a bogus get/put in generic_key_to_expire()" * tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix an Oops during delegation callbacks SUNRPC: Fix a bogus get/put in generic_key_to_expire() SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache NFSv4: Ensure that the state manager exits the loop on SIGKILL NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING
2018-11-14l2tp: fix a sock refcnt leak in l2tp_tunnel_registerXin Long1-5/+4
This issue happens when trying to add an existent tunnel. It doesn't call sock_put() before returning -EEXIST to release the sock refcnt that was held by calling sock_hold() before the existence check. This patch is to fix it by holding the sock after doing the existence check. Fixes: f6cd651b056f ("l2tp: fix race in duplicate tunnel detection") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14Merge tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-4/+3
Pull nfsd fixes from Bruce Fields: "Three nfsd bugfixes. None are new bugs, but they all take a little effort to hit, which might explain why they weren't found sooner" * tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linux: SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer() nfsd: COPY and CLONE operations require the saved filehandle to be set sunrpc: correct the computation for page_ptr when truncating
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 08:42:56 +0000