summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds48-240/+474
Pull networking fixes from David Miller: "This pull request is dedicated to the upcoming snowpocalypse parts 2 and 3 in the Pacific Northwest: 1) Drop profiles are broken because some drivers use dev_kfree_skb* instead of dev_consume_skb*, from Yang Wei. 2) Fix IWLWIFI kconfig deps, from Luca Coelho. 3) Fix percpu maps updating in bpftool, from Paolo Abeni. 4) Missing station release in batman-adv, from Felix Fietkau. 5) Fix some networking compat ioctl bugs, from Johannes Berg. 6) ucc_geth must reset the BQL queue state when stopping the device, from Mathias Thore. 7) Several XDP bug fixes in virtio_net from Toshiaki Makita. 8) TSO packets must be sent always on queue 0 in stmmac, from Jose Abreu. 9) Fix socket refcounting bug in RDS, from Eric Dumazet. 10) Handle sparse cpu allocations in bpf selftests, from Martynas Pumputis. 11) Make sure mgmt frames have enough tailroom in mac80211, from Felix Feitkau. 12) Use safe list walking in sctp_sendmsg() asoc list traversal, from Greg Kroah-Hartman. 13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL ccid, from Eric Dumazet. 14) Need to reload WoL password into bcmsysport device after deep sleeps, from Florian Fainelli. 15) Remove filter from mask before freeing in cls_flower, from Petr Machata. 16) Missing release and use after free in error paths of s390 qeth code, from Julian Wiedmann. 17) Fix lockdep false positive in dsa code, from Marc Zyngier. 18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn. 19) Fix EQ firmware assert in qed driver, from Manish Chopra. 20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: dsa: b53: Fix for failure when irq is not defined in dt sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled net: Don't default Cavium PTP driver to 'y' net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net/mlx5e: Don't overwrite pedit action when multiple pedit used net/mlx5e: Update hw flows when encap source mac changed qed*: Advance drivers version to 8.37.0.20 qed: Change verbosity for coalescing message. qede: Fix system crash on configuring channels. qed: Consider TX tcs while deriving the max num_queues for PF. ...
2019-02-07sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()Hangbin Liu1-1/+2
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: dsa: Fix NULL checking in dsa_slave_set_eee()Dan Carpenter1-2/+2
This function can't succeed if dp->pl is NULL. It will Oops inside the call to return phylink_ethtool_get_eee(dp->pl, e); Fixes: 1be52e97ed3e ("dsa: slave: eee: Allow ports to use phylink") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06svcrdma: Remove max_sge check at connect timeChuck Lever2-12/+102
Two and a half years ago, the client was changed to use gathered Send for larger inline messages, in commit 655fec6987b ("xprtrdma: Use gathered Send for large inline messages"). Several fixes were required because there are a few in-kernel device drivers whose max_sge is 3, and these were broken by the change. Apparently my memory is going, because some time later, I submitted commit 25fd86eca11c ("svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt"), and after that, commit f3c1fd0ee294 ("svcrdma: Reduce max_send_sges"). These too incorrectly assumed in-kernel device drivers would have more than a few Send SGEs available. The fix for the server side is not the same. This is because the fundamental problem on the server is that, whether or not the client has provisioned a chunk for the RPC reply, the server must squeeze even the most complex RPC replies into a single RDMA Send. Failing in the send path because of Send SGE exhaustion should never be an option. Therefore, instead of failing when the send path runs out of SGEs, switch to using a bounce buffer mechanism to handle RPC replies that are too complex for the device to send directly. That allows us to remove the max_sge check to enable drivers with small max_sge to work again. Reported-by: Don Dutile <ddutile@redhat.com> Fixes: 25fd86eca11c ("svcrdma: Don't overrun the SGE array in ...") Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-02-06rxrpc: bad unlock balance in rxrpc_recvmsgEric Dumazet1-1/+2
When either "goto wait_interrupted;" or "goto wait_error;" paths are taken, socket lock has already been released. This patch fixes following syzbot splat : WARNING: bad unlock balance detected! 5.0.0-rc4+ #59 Not tainted ------------------------------------- syz-executor223/8256 is trying to release lock (sk_lock-AF_RXRPC) at: [<ffffffff86651353>] rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 but there are no more locks to release! other info that might help us debug this: 1 lock held by syz-executor223/8256: #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2798 stack backtrace: CPU: 1 PID: 8256 Comm: syz-executor223 Not tainted 5.0.0-rc4+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_unlock_imbalance_bug kernel/locking/lockdep.c:3391 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3368 __lock_release kernel/locking/lockdep.c:3601 [inline] lock_release+0x67e/0xa00 kernel/locking/lockdep.c:3860 sock_release_ownership include/net/sock.h:1471 [inline] release_sock+0x183/0x1c0 net/core/sock.c:2808 rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg net/socket.c:801 [inline] sock_recvmsg+0xd0/0x110 net/socket.c:797 __sys_recvfrom+0x1ff/0x350 net/socket.c:1845 __do_sys_recvfrom net/socket.c:1863 [inline] __se_sys_recvfrom net/socket.c:1859 [inline] __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:1859 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446379 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe5da89fd98 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00000000006dbc28 RCX: 0000000000446379 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c R13: 0000000000000000 R14: 0000000000000000 R15: 20c49ba5e353f7cf Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller8-116/+111
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Use CONFIG_NF_TABLES_INET from seltests, not NF_TABLES_INET. From Naresh Kamboju. 2) Add a test to cover masquerading and redirect case, from Florian Westphal. 3) Two packets coming from the same socket may race to set up NAT, ending up with different tuples and the packet losing race being dropped. Update nf_conntrack_tuple_taken() to exercise clash resolution for this case. From Martynas Pumputis and Florian Westphal. 4) Unbind anonymous sets from the commit and abort path, this fixes a splat due to double set list removal/release in case that the transaction needs to be aborted. 5) Do not preserve original output interface for packets that are redirected in the output chain when ip6_route_me_harder() is called. Otherwise packets end up going not going to the loopback device. From Eli Cooper. 6) Fix bogus splat in nft_compat with CONFIG_REFCOUNT_FULL=y, this also simplifies the existing logic to deal with the list insertions of the xtables extensions. From Florian Westphal. Diffstat look rather larger than usual because of the new selftest, but Florian and I consider that having tests soon into the tree is good to improve coverage. If there's a different policy in this regard, please, let me know. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05netfilter: nft_compat: don't use refcount_inc on newly allocated entryFlorian Westphal1-39/+23
When I moved the refcount to refcount_t type I missed the fact that refcount_inc() will result in use-after-free warning with CONFIG_REFCOUNT_FULL=y builds. The correct fix would be to init the reference count to 1 at allocation time, but, unfortunately we cannot do this, as we can't undo that in case something else fails later in the batch. So only solution I see is to special-case the 'new entry' condition and replace refcount_inc() with a "delayed" refcount_set(1) in this case, as done here. The .activate callback can be removed to simplify things, we only need to make sure that deactivate() decrements/unlinks the entry from the list at end of transaction phase (commit or abort). Fixes: 12c44aba6618 ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count") Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-05netfilter: ipv6: Don't preserve original oif for loopback addressEli Cooper1-1/+3
Commit 508b09046c0f ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict(). REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped. Fixes: 508b09046c0f ("netfilter: ipv6: Preserve link scope traffic original oif") Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04net: dsa: Fix lockdep false positive splatMarc Zyngier1-0/+4
Creating a macvtap on a DSA-backed interface results in the following splat when lockdep is enabled: [ 19.638080] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready [ 23.041198] device lan0 entered promiscuous mode [ 23.043445] device eth0 entered promiscuous mode [ 23.049255] [ 23.049557] ============================================ [ 23.055021] WARNING: possible recursive locking detected [ 23.060490] 5.0.0-rc3-00013-g56c857a1b8d3 #118 Not tainted [ 23.066132] -------------------------------------------- [ 23.071598] ip/2861 is trying to acquire lock: [ 23.076171] 00000000f61990cb (_xmit_ETHER){+...}, at: dev_set_rx_mode+0x1c/0x38 [ 23.083693] [ 23.083693] but task is already holding lock: [ 23.089696] 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70 [ 23.096774] [ 23.096774] other info that might help us debug this: [ 23.103494] Possible unsafe locking scenario: [ 23.103494] [ 23.109584] CPU0 [ 23.112093] ---- [ 23.114601] lock(_xmit_ETHER); [ 23.117917] lock(_xmit_ETHER); [ 23.121233] [ 23.121233] *** DEADLOCK *** [ 23.121233] [ 23.127325] May be due to missing lock nesting notation [ 23.127325] [ 23.134315] 2 locks held by ip/2861: [ 23.137987] #0: 000000003b766c72 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x338/0x4e0 [ 23.146231] #1: 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70 [ 23.153757] [ 23.153757] stack backtrace: [ 23.158243] CPU: 0 PID: 2861 Comm: ip Not tainted 5.0.0-rc3-00013-g56c857a1b8d3 #118 [ 23.166212] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT) [ 23.172843] Call trace: [ 23.175358] dump_backtrace+0x0/0x188 [ 23.179116] show_stack+0x14/0x20 [ 23.182524] dump_stack+0xb4/0xec [ 23.185928] __lock_acquire+0x123c/0x1860 [ 23.190048] lock_acquire+0xc8/0x248 [ 23.193724] _raw_spin_lock_bh+0x40/0x58 [ 23.197755] dev_set_rx_mode+0x1c/0x38 [ 23.201607] dev_set_promiscuity+0x3c/0x50 [ 23.205820] dsa_slave_change_rx_flags+0x5c/0x70 [ 23.210567] __dev_set_promiscuity+0x148/0x1e0 [ 23.215136] __dev_set_rx_mode+0x74/0x98 [ 23.219167] dev_uc_add+0x54/0x70 [ 23.222575] macvlan_open+0x170/0x1d0 [ 23.226336] __dev_open+0xe0/0x160 [ 23.229830] __dev_change_flags+0x16c/0x1b8 [ 23.234132] dev_change_flags+0x20/0x60 [ 23.238074] do_setlink+0x2d0/0xc50 [ 23.241658] __rtnl_newlink+0x5f8/0x6e8 [ 23.245601] rtnl_newlink+0x50/0x78 [ 23.249184] rtnetlink_rcv_msg+0x360/0x4e0 [ 23.253397] netlink_rcv_skb+0xe8/0x130 [ 23.257338] rtnetlink_rcv+0x14/0x20 [ 23.261012] netlink_unicast+0x190/0x210 [ 23.265043] netlink_sendmsg+0x288/0x350 [ 23.269075] sock_sendmsg+0x18/0x30 [ 23.272659] ___sys_sendmsg+0x29c/0x2c8 [ 23.276602] __sys_sendmsg+0x60/0xb8 [ 23.280276] __arm64_sys_sendmsg+0x1c/0x28 [ 23.284488] el0_svc_common+0xd8/0x138 [ 23.288340] el0_svc_handler+0x24/0x80 [ 23.292192] el0_svc+0x8/0xc This looks fairly harmless (no actual deadlock occurs), and is fixed in a similar way to c6894dec8ea9 ("bridge: fix lockdep addr_list_lock false positive splat") by putting the addr_list_lock in its own lockdep class. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net: dsa: slave: Don't propagate flag changes on down slave interfacesRundong Ge1-5/+8
The unbalance of master's promiscuity or allmulti will happen after ifdown and ifup a slave interface which is in a bridge. When we ifdown a slave interface , both the 'dsa_slave_close' and 'dsa_slave_change_rx_flags' will clear the master's flags. The flags of master will be decrease twice. In the other hand, if we ifup the slave interface again, since the slave's flags were cleared the 'dsa_slave_open' won't set the master's flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if' will set the master's flags. The flags of master is increase once. Only propagating flag changes when a slave interface is up makes sure this does not happen. The 'vlan_dev_change_rx_flags' had the same problem and was fixed, and changes here follows that fix. Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Rundong Ge <rdong.ge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net: cls_flower: Remove filter from mask before freeing itPetr Machata1-1/+5
In fl_change(), when adding a new rule (i.e. fold == NULL), a driver may reject the new rule, for example due to resource exhaustion. By that point, the new rule was already assigned a mask, and it was added to that mask's hash table. The clean-up path that's invoked as a result of the rejection however neglects to undo the hash table addition, and proceeds to free the new rule, thus leaving a dangling pointer in the hash table. Fix by removing fnew from the mask's hash table before it is freed. Fixes: 35cc3cefc4de ("net/sched: cls_flower: Reject duplicated rules also under skip_sw") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net/smc: correct state change for peer closingUrsula Braun1-8/+1
If some kind of closing is received from the peer while still in state SMC_INIT, it means the peer has had an active connection and closed the socket quickly before listen_work finished. This should not result in a shortcut from state SMC_INIT to state SMC_CLOSED. This patch adds the socket to the accept queue in state SMC_APPCLOSEWAIT1. The socket reaches state SMC_CLOSED once being accepted and closed with smc_release(). Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net/smc: delete rkey first before switching to unusedUrsula Braun1-1/+1
Once RMBs are flagged as unused they are candidates for reuse. Thus the LLC DELETE RKEY operaton should be made before flagging the RMB as unused. Fixes: c7674c001b11 ("net/smc: unregister rkeys of unused buffer") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net/smc: fix sender_free computationUrsula Braun3-4/+30
In some scenarios a separate consumer cursor update is necessary. The decision is made in smc_tx_consumer_cursor_update(). The sender_free computation could be wrong: The rx confirmed cursor is always smaller than or equal to the rx producer cursor. The parameters in the smc_curs_diff() call have to be exchanged, otherwise sender_free might even be negative. And if more data arrives local_rx_ctrl.prod might be updated, enabling a cursor difference between local_rx_ctrl.prod and rx confirmed cursor larger than the RMB size. This case is not covered by smc_curs_diff(). Thus function smc_curs_diff_large() is introduced here. If a recvmsg() is processed in parallel, local_tx_ctrl.cons might change during smc_cdc_msg_send. Make sure rx_curs_confirmed is updated with the actually sent local_tx_ctrl.cons value. Fixes: e82f2e31f559 ("net/smc: optimize consumer cursor updates") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net/smc: preallocated memory for rdma work requestsUrsula Braun7-33/+92
The work requests for rdma writes are built in local variables within function smc_tx_rdma_write(). This violates the rule that the work request storage has to stay till the work request is confirmed by a completion queue response. This patch introduces preallocated memory for these work requests. The storage is allocated, once a link (and thus a queue pair) is established. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04netfilter: nf_tables: unbind set in rule from commit pathPablo Neira Ayuso6-79/+72
Anonymous sets that are bound to rules from the same transaction trigger a kernel splat from the abort path due to double set list removal and double free. This patch updates the logic to search for the transaction that is responsible for creating the set and disable the set list removal and release, given the rule is now responsible for this. Lookup is reverse since the transaction that adds the set is likely to be at the tail of the list. Moreover, this patch adds the unbind step to deliver the event from the commit path. This should not be done from the worker thread, since we have no guarantees of in-order delivery to the listener. This patch removes the assumption that both activate and deactivate callbacks need to be provided. Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") Reported-by: Mikhail Morfikov <mmorfikov@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04netfilter: nf_nat: skip nat clash resolution for same-origin entriesMartynas Pumputis1-0/+16
It is possible that two concurrent packets originating from the same socket of a connection-less protocol (e.g. UDP) can end up having different IP_CT_DIR_REPLY tuples which results in one of the packets being dropped. To illustrate this, consider the following simplified scenario: 1. Packet A and B are sent at the same time from two different threads by same UDP socket. No matching conntrack entry exists yet. Both packets cause allocation of a new conntrack entry. 2. get_unique_tuple gets called for A. No clashing entry found. conntrack entry for A is added to main conntrack table. 3. get_unique_tuple is called for B and will find that the reply tuple of B is already taken by A. It will allocate a new UDP source port for B to resolve the clash. 4. conntrack entry for B cannot be added to main conntrack table because its ORIGINAL direction is clashing with A and the REPLY directions of A and B are not the same anymore due to UDP source port reallocation done in step 3. This patch modifies nf_conntrack_tuple_taken so it doesn't consider colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal. [ Florian: simplify patch to not use .allow_clash setting and always ignore identical flows ] Signed-off-by: Martynas Pumputis <martynas@weave.works> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-03sctp: check and update stream->out_curr when allocating stream_outXin Long1-0/+20
Now when using stream reconfig to add out streams, stream->out will get re-allocated, and all old streams' information will be copied to the new ones and the old ones will be freed. So without stream->out_curr updated, next time when trying to send from stream->out_curr stream, a panic would be caused. This patch is to check and update stream->out_curr when allocating stream_out. v1->v2: - define fa_index() to get elem index from stream->out_curr. v2->v3: - repost with no change. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Ying Xu <yinxu@redhat.com> Reported-by: syzbot+e33a3a138267ca119c7d@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03vsock/virtio: reset connected sockets on device removalStefano Garzarella1-0/+3
When the virtio transport device disappear, we should reset all connected sockets in order to inform the users. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03vsock/virtio: fix kernel panic after device hot-unplugStefano Garzarella1-8/+18
virtio_vsock_remove() invokes the vsock_core_exit() also if there are opened sockets for the AF_VSOCK protocol family. In this way the vsock "transport" pointer is set to NULL, triggering the kernel panic at the first socket activity. This patch move the vsock_core_init()/vsock_core_exit() in the virtio_vsock respectively in module_init and module_exit functions, that cannot be invoked until there are open sockets. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699 Reported-by: Yan Fu <yafu@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-2/+3
Alexei Starovoitov says: ==================== pull-request: bpf 2019-01-31 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) disable preemption in sender side of socket filters, from Alexei. 2) fix two potential deadlocks in syscall bpf lookup and prog_register, from Martin and Alexei. 3) fix BTF to allow typedef on func_proto, from Yonghong. 4) two bpftool fixes, from Jiri and Paolo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01dccp: fool proof ccid_hc_[rt]x_parse_options()Eric Dumazet1-2/+2
Similarly to commit 276bdb82dedb ("dccp: check ccid before dereferencing") it is wise to test for a NULL ccid. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3+ #37 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b kobject: 'loop5' (0000000080f78fc1): kobject_uevent_env RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 000000008db5e000 CR4: 00000000001406e0 kobject: 'loop5' (0000000080f78fc1): fill_kobj_path: path = '/devices/virtual/block/loop5' DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_rcv_state_process+0x2b6/0x1af6 net/dccp/input.c:654 dccp_v4_do_rcv+0x100/0x190 net/dccp/ipv4.c:688 sk_backlog_rcv include/net/sock.h:936 [inline] __sk_receive_skb+0x3a9/0xea0 net/core/sock.c:473 dccp_v4_rcv+0x10cb/0x1f80 net/dccp/ipv4.c:880 ip_protocol_deliver_rcu+0xb6/0xa20 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1f0/0x740 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1f4/0x2f0 net/ipv4/ip_input.c:414 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xed/0x620 net/ipv4/ip_input.c:524 __netif_receive_skb_one_core+0x160/0x210 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083 process_backlog+0x206/0x750 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x76d/0x1930 net/core/dev.c:6412 __do_softirq+0x30b/0xb11 kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:654 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646 smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace 58a0ba03bea2c376 ]--- RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 0000000009871000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: fix use of variable in cleared areaKarsten Graul1-4/+4
Do not use pend->idx as index for the arrays because its value is located in the cleared area. Use the existing local variable instead. Without this fix the wrong area might be cleared. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: use device link provided in qp_contextKarsten Graul1-3/+3
The device field of the IB event structure does not always point to the SMC IB device. Load the pointer from the qp_context which is always provided to smc_ib_qp_event_handler() in the priv field. And for qp events the affected port is given in the qp structure of the ibevent, derive it from there. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: call smc_cdc_msg_send() under send_lockKarsten Graul1-1/+4
Call smc_cdc_msg_send() under the connection send_lock to make sure all send operations for one connection are serialized. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: do not wait under send_lockKarsten Graul1-6/+4
smc_cdc_get_free_slot() might wait for free transfer buffers when using SMC-R. This wait should not be done under the send_lock, which is a spin_lock. This fixes a cpu loop in parallel threads waiting for the send_lock. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: recvmsg and splice_read should return 0 after shutdownKarsten Graul1-1/+10
When a socket was connected and is now shut down for read, return 0 to indicate end of data in recvmsg and splice_read (like TCP) and do not return ENOTCONN. This behavior is required by the socket api. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: don't wait for send buffer space when data was already sentKarsten Graul1-4/+3
When there is no more send buffer space and at least 1 byte was already sent then return to user space. The wait is only done when no data was sent by the sendmsg() call. This fixes smc_tx_sendmsg() which tried to always send all user data and started to wait for free send buffer space when needed. During this wait the user space program was blocked in the sendmsg() call and hence not able to receive incoming data. When both sides were in such a situation then the connection stalled forever. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: prevent races between smc_lgr_terminate() and smc_conn_free()Karsten Graul1-0/+4
To prevent races between smc_lgr_terminate() and smc_conn_free() add an extra check of the lgr field before accessing it, and cancel a delayed free_work when a new smc connection is created. This fixes the problem that free_work cleared the lgr variable but smc_lgr_terminate() or smc_conn_free() still access it in parallel. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: allow 16 byte pnetids in netlink policyHans Wippel1-1/+1
Currently, users can only send pnetids with a maximum length of 15 bytes over the SMC netlink interface although the maximum pnetid length is 16 bytes. This patch changes the SMC netlink policy to accept 16 byte pnetids. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: fix another sizeof to int comparisonUrsula Braun1-1/+1
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. kernel_sendmsg can return a negative error code. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01sctp: walk the list of asoc safelyGreg Kroah-Hartman1-2/+2
In sctp_sendmesg(), when walking the list of endpoint associations, the association can be dropped from the list, making the list corrupt. Properly handle this by using list_for_each_entry_safe() Fixes: 4910280503f3 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg") Reported-by: Secunia Research <vuln@secunia.com> Tested-by: Secunia Research <vuln@secunia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01Merge tag 'batadv-net-for-davem-20190201' of git://git.open-mesh.org/linux-mergeDavid S. Miller3-2/+8
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Avoid WARN to report incorrect configuration, by Sven Eckelmann - Fix mac header position setting, by Sven Eckelmann - Fix releasing station statistics, by Felix Fietkau ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01cfg80211: call disconnect_wk when AP stopsJohannes Berg3-1/+5
Since we now prevent regulatory restore during STA disconnect if concurrent AP interfaces are active, we need to reschedule this check when the AP state changes. This fixes never doing a restore when an AP is the last interface to stop. Or to put it another way: we need to re-check after anything we check here changes. Cc: stable@vger.kernel.org Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01mac80211: ensure that mgmt tx skbs have tailroom for encryptionFelix Fietkau1-3/+9
Some drivers use IEEE80211_KEY_FLAG_SW_MGMT_TX to indicate that management frames need to be software encrypted. Since normal data packets are still encrypted by the hardware, crypto_tx_tailroom_needed_cnt gets decremented after key upload to hw. This can lead to passing skbs to ccmp_encrypt_skb, which don't have the necessary tailroom for software encryption. Change the code to add tailroom for encrypted management packets, even if crypto_tx_tailroom_needed_cnt is 0. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-31rds: fix refcount bug in rds_sock_addrefEric Dumazet1-3/+3
syzbot was able to catch a bug in rds [1] The issue here is that the socket might be found in a hash table but that its refcount has already be set to 0 by another cpu. We need to use refcount_inc_not_zero() to be safe here. [1] refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked lib/refcount.c:153 [inline] WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23129 Comm: syz-executor3 Not tainted 5.0.0-rc4+ #53 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x48 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:153 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Code: 1d 51 63 c8 06 31 ff 89 de e8 eb 1b f2 fd 84 db 75 dd e8 a2 1a f2 fd 48 c7 c7 60 9f 81 88 c6 05 31 63 c8 06 01 e8 af 65 bb fd <0f> 0b eb c1 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 RSP: 0018:ffff8880a0cbf1e8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90006113000 RDX: 000000000001047d RSI: ffffffff81685776 RDI: 0000000000000005 RBP: ffff8880a0cbf1f8 R08: ffff888097c9e100 R09: ffffed1015ce5021 R10: ffffed1015ce5020 R11: ffff8880ae728107 R12: ffff8880723c20c0 R13: ffff8880723c24b0 R14: dffffc0000000000 R15: ffffed1014197e64 sock_hold include/net/sock.h:647 [inline] rds_sock_addref+0x19/0x20 net/rds/af_rds.c:675 rds_find_bound+0x97c/0x1080 net/rds/bind.c:82 rds_recv_incoming+0x3be/0x1430 net/rds/recv.c:362 rds_loop_xmit+0xf3/0x2a0 net/rds/loop.c:96 rds_send_xmit+0x1355/0x2a10 net/rds/send.c:355 rds_sendmsg+0x323c/0x44e0 net/rds/send.c:1368 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:631 __sys_sendto+0x387/0x5f0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto net/socket.c:1796 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1796 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458089 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc266df8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 0000000000458089 RDX: 0000000000000000 RSI: 00000000204b3fff RDI: 0000000000000005 RBP: 000000000073bf00 R08: 00000000202b4000 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc266df96d4 R13: 00000000004c56e4 R14: 00000000004d94a8 R15: 00000000ffffffff Fixes: cc4dfb7f70a3 ("rds: fix two RCU related problems") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31l2tp: copy 4 more bytes to linear part if necessaryJacob Wen1-3/+2
The size of L2TPv2 header with all optional fields is 14 bytes. l2tp_udp_recv_core only moves 10 bytes to the linear part of a skb. This may lead to l2tp_recv_common read data outside of a skb. This patch make sure that there is at least 14 bytes in the linear part of a skb to meet the maximum need of l2tp_udp_recv_core and l2tp_recv_common. The minimum size of both PPP HDLC-like frame and Ethernet frame is larger than 14 bytes, so we are safe to do so. Also remove L2TP_HDR_SIZE_NOSEQ, it is unused now. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30l2tp: fix reading optional fields of L2TPv3Jacob Wen4-0/+30
Use pskb_may_pull() to make sure the optional fields are in skb linear parts, so we can safely read them later. It's easy to reproduce the issue with a net driver that supports paged skb data. Just create a L2TPv3 over IP tunnel and then generates some network traffic. Once reproduced, rx err in /sys/kernel/debug/l2tp/tunnels will increase. Changes in v4: 1. s/l2tp_v3_pull_opt/l2tp_v3_ensure_opt_in_linear/ 2. s/tunnel->version != L2TP_HDR_VER_2/tunnel->version == L2TP_HDR_VER_3/ 3. Add 'Fixes' in commit messages. Changes in v3: 1. To keep consistency, move the code out of l2tp_recv_common. 2. Use "net" instead of "net-next", since this is a bug fix. Changes in v2: 1. Only fix L2TPv3 to make code simple. To fix both L2TPv3 and L2TPv2, we'd better refactor l2tp_recv_common. It's complicated to do so. 2. Reloading pointers after pskb_may_pull Fixes: f7faffa3ff8e ("l2tp: Add L2TPv3 protocol support") Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulationYohei Kanemaru1-0/+2
skb->cb may contain data from previous layers (in an observed case IPv4 with L3 Master Device). In the observed scenario, the data in IPCB(skb)->frags was misinterpreted as IP6CB(skb)->frag_max_size, eventually caused an unexpected IPv6 fragmentation in ip6_fragment() through ip6_finish_output(). This patch clears IP6CB(skb), which potentially contains garbage data, on the SRH ip4ip6 encapsulation. Fixes: 32d99d0b6702 ("ipv6: sr: add support for ip4ip6 encapsulation") Signed-off-by: Yohei Kanemaru <yohei.kanemaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: ip6_gre: always reports o_key to userspaceLorenzo Bianconi1-1/+6
As Erspan_v4, Erspan_v6 protocol relies on o_key to configure session id header field. However TUNNEL_KEY bit is cleared in ip6erspan_tunnel_xmit since ERSPAN protocol does not set the key field of the external GRE header and so the configured o_key is not reported to userspace. The issue can be triggered with the following reproducer: $ip link add ip6erspan1 type ip6erspan local 2000::1 remote 2000::2 \ key 1 seq erspan_ver 1 $ip link set ip6erspan1 up ip -d link sh ip6erspan1 ip6erspan1@NONE: <BROADCAST,MULTICAST> mtu 1422 qdisc noop state DOWN mode DEFAULT link/ether ba:ff:09:24:c3:0e brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500 ip6erspan remote 2000::2 local 2000::1 encaplimit 4 flowlabel 0x00000 ikey 0.0.0.1 iseq oseq Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in ip6gre_fill_info Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: ip_gre: always reports o_key to userspaceLorenzo Bianconi1-1/+6
Erspan protocol (version 1 and 2) relies on o_key to configure session id header field. However TUNNEL_KEY bit is cleared in erspan_xmit since ERSPAN protocol does not set the key field of the external GRE header and so the configured o_key is not reported to userspace. The issue can be triggered with the following reproducer: $ip link add erspan1 type erspan local 192.168.0.1 remote 192.168.0.2 \ key 1 seq erspan_ver 1 $ip link set erspan1 up $ip -d link sh erspan1 erspan1@NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UNKNOWN mode DEFAULT link/ether 52:aa:99:95:9a:b5 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500 erspan remote 192.168.0.2 local 192.168.0.1 ttl inherit ikey 0.0.0.1 iseq oseq erspan_index 0 Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in ipgre_fill_info Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: socket: make bond ioctls go through compat_ifreq_ioctl()Johannes Berg1-4/+4
Same story as before, these use struct ifreq and thus need to be read with the shorter version to not cause faults. Cc: stable@vger.kernel.org Fixes: f92d4fc95341 ("kill bond_ioctl()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: socket: fix SIOCGIFNAME in compatJohannes Berg1-1/+2
As reported by Robert O'Callahan in https://bugzilla.kernel.org/show_bug.cgi?id=202273 reverting the previous changes in this area broke the SIOCGIFNAME ioctl in compat again (I'd previously fixed it after his previous report of breakage in https://bugzilla.kernel.org/show_bug.cgi?id=199469). This is obviously because I fixed SIOCGIFNAME more or less by accident. Fix it explicitly now by making it pass through the restored compat translation code. Cc: stable@vger.kernel.org Fixes: 4cf808e7ac32 ("kill dev_ifname32()") Reported-by: Robert O'Callahan <robert@ocallahan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30Revert "kill dev_ifsioc()"Johannes Berg1-0/+49
This reverts commit bf4405737f9f ("kill dev_ifsioc()"). This wasn't really unused as implied by the original commit, it still handles the copy to/from user differently, and the commit thus caused issues such as https://bugzilla.kernel.org/show_bug.cgi?id=199469 and https://bugzilla.kernel.org/show_bug.cgi?id=202273 However, deviating from a strict revert, rename dev_ifsioc() to compat_ifreq_ioctl() to be clearer as to its purpose and add a comment. Cc: stable@vger.kernel.org Fixes: bf4405737f9f ("kill dev_ifsioc()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30Revert "socket: fix struct ifreq size in compat ioctl"Johannes Berg1-14/+8
This reverts commit 1cebf8f143c2 ("socket: fix struct ifreq size in compat ioctl"), it's a bugfix for another commit that I'll revert next. This is not a 'perfect' revert, I'm keeping some coding style intact rather than revert to the state with indentation errors. Cc: stable@vger.kernel.org Fixes: 1cebf8f143c2 ("socket: fix struct ifreq size in compat ioctl") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29net: set default network namespace in init_dummy_netdev()Josh Elsasser1-0/+3
Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048da3b ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by: Josh Elsasser <jelsasser@appneta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28net: tls: Fix deadlock in free_resources txDave Watson1-0/+2
If there are outstanding async tx requests (when crypto returns EINPROGRESS), there is a potential deadlock: the tx work acquires the lock, while we cancel_delayed_work_sync() while holding the lock. Drop the lock while waiting for the work to complete. Fixes: a42055e8d2c30 ("Add support for async encryption of records...") Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28net: tls: Save iv in tls_rec for async crypto requestsDave Watson1-1/+3
aead_request_set_crypt takes an iv pointer, and we change the iv soon after setting it. Some async crypto algorithms don't save the iv, so we need to save it in the tls_rec for async requests. Found by hardcoding x64 aesni to use async crypto manager (to test the async codepath), however I don't think this combination can happen in the wild. Presumably other hardware offloads will need this fix, but there have been no user reports. Fixes: a42055e8d2c30 ("Add support for async encryption of records...") Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29sk_msg: Always cancel strp work before freeing the psockJakub Sitnicki1-2/+1
Despite having stopped the parser, we still need to deinitialize it by calling strp_done so that it cancels its work. Otherwise the worker thread can run after we have freed the parser, and attempt to access its workqueue resulting in a use-after-free: ================================================================== BUG: KASAN: use-after-free in pwq_activate_delayed_work+0x1b/0x1d0 Read of size 8 at addr ffff888069975240 by task kworker/u2:2/93 CPU: 0 PID: 93 Comm: kworker/u2:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3d4fe-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: (null) (kstrp) Call Trace: print_address_description+0x6e/0x2b0 ? pwq_activate_delayed_work+0x1b/0x1d0 kasan_report+0xfd/0x177 ? pwq_activate_delayed_work+0x1b/0x1d0 ? pwq_activate_delayed_work+0x1b/0x1d0 pwq_activate_delayed_work+0x1b/0x1d0 ? process_one_work+0x4aa/0x660 pwq_dec_nr_in_flight+0x9b/0x100 worker_thread+0x82/0x680 ? process_one_work+0x660/0x660 kthread+0x1b9/0x1e0 ? __kthread_create_on_node+0x250/0x250 ret_from_fork+0x1f/0x30 Allocated by task 111: sk_psock_init+0x3c/0x1b0 sock_map_link.isra.2+0x103/0x4b0 sock_map_update_common+0x94/0x270 sock_map_update_elem+0x145/0x160 __se_sys_bpf+0x152e/0x1e10 do_syscall_64+0xb2/0x3e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 112: kfree+0x7f/0x140 process_one_work+0x40b/0x660 worker_thread+0x82/0x680 kthread+0x1b9/0x1e0 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888069975180 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 192 bytes inside of 512-byte region [ffff888069975180, ffff888069975380) The buggy address belongs to the page: page:ffffea0001a65d00 count:1 mapcount:0 mapping:ffff88806d401280 index:0x0 compound_mapcount: 0 flags: 0x4000000000010200(slab|head) raw: 4000000000010200 dead000000000100 dead000000000200 ffff88806d401280 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888069975100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888069975180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888069975200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888069975280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888069975300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: Marek Majkowski <marek@cloudflare.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/netdev/CAJPywTLwgXNEZ2dZVoa=udiZmtrWJ0q5SuBW64aYs0Y1khXX3A@mail.gmail.com Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller5-51/+165
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) The nftnl mutex is now per-netns, therefore use reference counter for matches and targets to deal with concurrent updates from netns. Moreover, place extensions in a pernet list. Patches from Florian Westphal. 2) Bail out with EINVAL in case of negative timeouts via setsockopt() through ip_vs_set_timeout(), from ZhangXiaoxu. 3) Spurious EINVAL on ebtables 32bit binary with 64bit kernel, also from Florian. 4) Reset TCP option header parser in case of fingerprint mismatch, otherwise follow up overlapping fingerprint definitions including TCP options do not work, from Fernando Fernandez Mancera. 5) Compilation warning in ipt_CLUSTER with CONFIG_PROC_FS unset. From Anders Roxell. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>