summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds3-3/+3
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07Merge branch 'work.icache' of ↵Linus Torvalds1-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode freeing updates from Al Viro: "Introduction of separate method for RCU-delayed part of ->destroy_inode() (if any). Pretty much as posted, except that destroy_inode() stashes ->free_inode into the victim (anon-unioned with ->i_fops) before scheduling i_callback() and the last two patches (sockfs conversion and folding struct socket_wq into struct socket) are excluded - that pair should go through netdev once davem reopens his tree" * 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits) orangefs: make use of ->free_inode() shmem: make use of ->free_inode() hugetlb: make use of ->free_inode() overlayfs: make use of ->free_inode() jfs: switch to ->free_inode() fuse: switch to ->free_inode() ext4: make use of ->free_inode() ecryptfs: make use of ->free_inode() ceph: use ->free_inode() btrfs: use ->free_inode() afs: switch to use of ->free_inode() dax: make use of ->free_inode() ntfs: switch to ->free_inode() securityfs: switch to ->free_inode() apparmor: switch to ->free_inode() rpcpipe: switch to ->free_inode() bpf: switch to ->free_inode() mqueue: switch to ->free_inode() ufs: switch to ->free_inode() coda: switch to ->free_inode() ...
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-05-06Merge branch 'linus' of ↵Linus Torvalds7-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for AEAD in simd - Add fuzz testing to testmgr - Add panic_on_fail module parameter to testmgr - Use per-CPU struct instead multiple variables in scompress - Change verify API for akcipher Algorithms: - Convert x86 AEAD algorithms over to simd - Forbid 2-key 3DES in FIPS mode - Add EC-RDSA (GOST 34.10) algorithm Drivers: - Set output IV with ctr-aes in crypto4xx - Set output IV in rockchip - Fix potential length overflow with hashing in sun4i-ss - Fix computation error with ctr in vmx - Add SM4 protected keys support in ccree - Remove long-broken mxc-scc driver - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits) crypto: ccree - use a proper le32 type for le32 val crypto: ccree - remove set but not used variable 'du_size' crypto: ccree - Make cc_sec_disable static crypto: ccree - fix spelling mistake "protedcted" -> "protected" crypto: caam/qi2 - generate hash keys in-place crypto: caam/qi2 - fix DMA mapping of stack memory crypto: caam/qi2 - fix zero-length buffer DMA mapping crypto: stm32/cryp - update to return iv_out crypto: stm32/cryp - remove request mutex protection crypto: stm32/cryp - add weak key check for DES crypto: atmel - remove set but not used variable 'alg_name' crypto: picoxcell - Use dev_get_drvdata() crypto: crypto4xx - get rid of redundant using_sd variable crypto: crypto4xx - use sync skcipher for fallback crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues crypto: crypto4xx - fix ctr-aes missing output IV crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o crypto: ccree - handle tee fips error during power management resume crypto: ccree - add function to handle cryptocell tee fips error ...
2019-05-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "This cycle had the following changes: - Timer tracing improvements (Anna-Maria Gleixner) - Continued tasklet reduction work: remove the hrtimer_tasklet (Thomas Gleixner) - Fix CPU hotplug remove race in the tick-broadcast mask handling code (Thomas Gleixner) - Force upper bound for setting CLOCK_REALTIME, to fix ABI inconsistencies with handling values that are close to the maximum supported and the vagueness of when uptime related wraparound might occur. Make the consistent maximum the year 2232 across all relevant ABIs and APIs. (Thomas Gleixner) - various cleanups and smaller fixes" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix typos in comments tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline() timekeeping: Force upper bound for setting CLOCK_REALTIME timer/trace: Improve timer tracing timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps timer: Move trace point to get proper index tick/sched: Update tick_sched struct documentation tick: Remove outgoing CPU from broadcast masks timekeeping: Consistently use unsigned int for seqcount snapshot softirq: Remove tasklet_hrtimer xfrm: Replace hrtimer tasklet with softirq hrtimer mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-06Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "This cycles's RCU changes include: - a couple of straggling RCU flavor consolidation updates - SRCU updates - RCU CPU stall-warning updates - torture-test updates - an LKMM commit adding support for synchronize_srcu_expedited() - documentation updates - miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) net/ipv4/netfilter: Update comment from call_rcu_bh() to call_rcu() tools/memory-model: Add support for synchronize_srcu_expedited() doc/kprobes: Update obsolete RCU update functions torture: Suppress false-positive CONFIG_INITRAMFS_SOURCE complaint locktorture: NULL cxt.lwsa and cxt.lrsa to allow bad-arg detection rcuperf: Fix cleanup path for invalid perf_type strings rcutorture: Fix cleanup path for invalid torture_type strings rcutorture: Fix expected forward progress duration in OOM notifier rcutorture: Remove ->ext_irq_conflict field rcutorture: Make rcutorture_extend_mask() comment match the code tools/.../rcutorture: Convert to SPDX license identifier torture: Don't try to offline the last CPU rcu: Fix nohz status in stall warning rcu: Move forward-progress checkers into tree_stall.h rcu: Move irq-disabled stall-warning checking to tree_stall.h rcu: Organize functions in tree_stall.h rcu: Move FAST_NO_HZ stall-warning code to tree_stall.h rcu: Inline RCU stall-warning info helper functions rcu: Move rcu_print_task_exp_stall() to tree_exp.h rcu: Inline RCU task stall-warning helper functions ...
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov3-3/+3
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-01rpcpipe: switch to ->free_inode()Al Viro1-9/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-01udp: fix GRO packet of deathEric Dumazet1-3/+10
syzbot was able to crash host by sending UDP packets with a 0 payload. TCP does not have this issue since we do not aggregate packets without payload. Since dev_gro_receive() sets gso_size based on skb_gro_len(skb) it seems not worth trying to cope with padded packets. BUG: KASAN: slab-out-of-bounds in skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826 Read of size 16 at addr ffff88808893fff0 by task syz-executor612/7889 CPU: 0 PID: 7889 Comm: syz-executor612 Not tainted 5.1.0-rc7+ #96 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load16_noabort+0x14/0x20 mm/kasan/generic_report.c:133 skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826 udp_gro_receive_segment net/ipv4/udp_offload.c:382 [inline] call_gro_receive include/linux/netdevice.h:2349 [inline] udp_gro_receive+0xb61/0xfd0 net/ipv4/udp_offload.c:414 udp4_gro_receive+0x763/0xeb0 net/ipv4/udp_offload.c:478 inet_gro_receive+0xe72/0x1110 net/ipv4/af_inet.c:1510 dev_gro_receive+0x1cd0/0x23c0 net/core/dev.c:5581 napi_gro_frags+0x36b/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441cc0 Code: 05 48 3d 01 f0 ff ff 0f 83 9d 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 3d 51 93 29 00 00 75 14 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 74 09 fc ff c3 48 83 ec 08 e8 ba 2b 00 00 RSP: 002b:00007ffe8c716118 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007ffe8c716150 RCX: 0000000000441cc0 RDX: 0000000000000001 RSI: 00007ffe8c716170 RDI: 00000000000000f0 RBP: 0000000000000000 R08: 000000000000ffff R09: 0000000000a64668 R10: 0000000020000040 R11: 0000000000000246 R12: 000000000000c2d9 R13: 0000000000402b50 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 5143: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 mm_alloc+0x1d/0xd0 kernel/fork.c:1030 bprm_mm_init fs/exec.c:363 [inline] __do_execve_file.isra.0+0xaa3/0x23f0 fs/exec.c:1791 do_execveat_common fs/exec.c:1865 [inline] do_execve fs/exec.c:1882 [inline] __do_sys_execve fs/exec.c:1958 [inline] __se_sys_execve fs/exec.c:1953 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 5351: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 __mmdrop+0x238/0x320 kernel/fork.c:677 mmdrop include/linux/sched/mm.h:49 [inline] finish_task_switch+0x47b/0x780 kernel/sched/core.c:2746 context_switch kernel/sched/core.c:2880 [inline] __schedule+0x81b/0x1cc0 kernel/sched/core.c:3518 preempt_schedule_irq+0xb5/0x140 kernel/sched/core.c:3745 retint_kernel+0x1b/0x2d arch_local_irq_restore arch/x86/include/asm/paravirt.h:767 [inline] kmem_cache_free+0xab/0x260 mm/slab.c:3766 anon_vma_chain_free mm/rmap.c:134 [inline] unlink_anon_vmas+0x2ba/0x870 mm/rmap.c:401 free_pgtables+0x1af/0x2f0 mm/memory.c:394 exit_mmap+0x2d1/0x530 mm/mmap.c:3144 __mmput kernel/fork.c:1046 [inline] mmput+0x15f/0x4c0 kernel/fork.c:1067 exec_mmap fs/exec.c:1046 [inline] flush_old_exec+0x8d9/0x1c20 fs/exec.c:1279 load_elf_binary+0x9bc/0x53f0 fs/binfmt_elf.c:864 search_binary_handler fs/exec.c:1656 [inline] search_binary_handler+0x17f/0x570 fs/exec.c:1634 exec_binprm fs/exec.c:1698 [inline] __do_execve_file.isra.0+0x1394/0x23f0 fs/exec.c:1818 do_execveat_common fs/exec.c:1865 [inline] do_execve fs/exec.c:1882 [inline] __do_sys_execve fs/exec.c:1958 [inline] __se_sys_execve fs/exec.c:1953 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88808893f7c0 which belongs to the cache mm_struct of size 1496 The buggy address is located 600 bytes to the right of 1496-byte region [ffff88808893f7c0, ffff88808893fd98) The buggy address belongs to the page: page:ffffea0002224f80 count:1 mapcount:0 mapping:ffff88821bc40ac0 index:0xffff88808893f7c0 compound_mapcount: 0 flags: 0x1fffc0000010200(slab|head) raw: 01fffc0000010200 ffffea00025b4f08 ffffea00027b9d08 ffff88821bc40ac0 raw: ffff88808893f7c0 ffff88808893e440 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808893fe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808893ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808893ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888088940000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888088940080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01ipv6: A few fixes on dereferencing rt->fromMartin KaFai Lau1-20/+18
It is a followup after the fix in commit 9c69a1320515 ("route: Avoid crash from dereferencing NULL rt->from") rt6_do_redirect(): 1. NULL checking is needed on rt->from because a parallel fib6_info delete could happen that sets rt->from to NULL. (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()). 2. fib6_info_hold() is not enough. Same reason as (1). Meaning, holding dst->__refcnt cannot ensure rt->from is not NULL or rt->from->fib6_ref is not 0. Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc() is already doing, this patch chooses to extend the rcu section to keep "from" dereference-able after checking for NULL. inet6_rtm_getroute(): 1. NULL checking is also needed on rt->from for a similar reason. Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED. Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01rds: ib: force endiannes annotationNicholas Mc Guire1-5/+3
While the endiannes is being handled correctly as indicated by the comment above the offending line - sparse was unhappy with the missing annotation as be64_to_cpu() expects a __be64 argument. To mitigate this annotation all involved variables are changed to a consistent __le64 and the conversion to uint64_t delayed to the call to rds_cong_map_updated(). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01ipv4: ip_do_fragment: Preserve skb_iif during fragmentationShmulik Ladkani1-0/+1
Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb. As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior. Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex: - the correct iif is observed if forwarding path does not involve fragmentation/refragmentation - a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom Fix, by preserving skb_iif during 'ip_copy_metadata'. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net/tls: avoid NULL pointer deref on nskb->sk in fallbackJakub Kicinski1-1/+2
update_chksum() accesses nskb->sk before it has been set by complete_skb(), move the init up. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01packet: validate msg_namelen in send directlyWillem de Bruijn1-10/+14
Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header. Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len. Change v1->v2: initialize addr in all paths Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01packet: in recvmsg msg_name return at least sizeof sockaddr_llWillem de Bruijn1-2/+11
Packet send checks that msg_name is at least sizeof sockaddr_ll. Packet recv must return at least this length, so that its output can be passed unmodified to packet send. This ceased to be true since adding support for lladdr longer than sll_addr. Since, the return value uses true address length. Always return at least sizeof sockaddr_ll, even if address length is shorter. Zero the padding bytes. Change v1->v2: do not overwrite zeroed padding again. use copy_len. Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01sctp: avoid running the sctp state machine recursivelyXin Long2-37/+27
Ying triggered a call trace when doing an asconf testing: BUG: scheduling while atomic: swapper/12/0/0x10000100 Call Trace: <IRQ> [<ffffffffa4375904>] dump_stack+0x19/0x1b [<ffffffffa436fcaf>] __schedule_bug+0x64/0x72 [<ffffffffa437b93a>] __schedule+0x9ba/0xa00 [<ffffffffa3cd5326>] __cond_resched+0x26/0x30 [<ffffffffa437bc4a>] _cond_resched+0x3a/0x50 [<ffffffffa3e22be8>] kmem_cache_alloc_node+0x38/0x200 [<ffffffffa423512d>] __alloc_skb+0x5d/0x2d0 [<ffffffffc0995320>] sctp_packet_transmit+0x610/0xa20 [sctp] [<ffffffffc098510e>] sctp_outq_flush+0x2ce/0xc00 [sctp] [<ffffffffc098646c>] sctp_outq_uncork+0x1c/0x20 [sctp] [<ffffffffc0977338>] sctp_cmd_interpreter.isra.22+0xc8/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc099443d>] sctp_primitive_ASCONF+0x3d/0x50 [sctp] [<ffffffffc0977384>] sctp_cmd_interpreter.isra.22+0x114/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc097b3a4>] sctp_assoc_bh_rcv+0xf4/0x1b0 [sctp] [<ffffffffc09840f1>] sctp_inq_push+0x51/0x70 [sctp] [<ffffffffc099732b>] sctp_rcv+0xa8b/0xbd0 [sctp] As it shows, the first sctp_do_sm() running under atomic context (NET_RX softirq) invoked sctp_primitive_ASCONF() that uses GFP_KERNEL flag later, and this flag is supposed to be used in non-atomic context only. Besides, sctp_do_sm() was called recursively, which is not expected. Vlad tried to fix this recursive call in Commit c0786693404c ("sctp: Fix oops when sending queued ASCONF chunks") by introducing a new command SCTP_CMD_SEND_NEXT_ASCONF. But it didn't work as this command is still used in the first sctp_do_sm() call, and sctp_primitive_ASCONF() will be called in this command again. To avoid calling sctp_do_sm() recursively, we send the next queued ASCONF not by sctp_primitive_ASCONF(), but by sctp_sf_do_prm_asconf() in the 1st sctp_do_sm() directly. Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30ipv6: fix races in ip6_dst_destroy()Eric Dumazet2-10/+3
We had many syzbot reports that seem to be caused by use-after-free of struct fib6_info. ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception() are writers vs rt->from, and use non consistent synchronization among themselves. Switching to xchg() will solve the issues with no possible lockdep issues. BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline] BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649 CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 kasan_report.cold+0x5/0x40 mm/kasan/report.c:321 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 kasan_check_write+0x14/0x20 mm/kasan/common.c:108 atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] fib6_info_release include/net/ip6_fib.h:294 [inline] fib6_info_release include/net/ip6_fib.h:292 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 fib6_del_route net/ipv6/ip6_fib.c:1813 [inline] fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844 fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006 fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976 fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055 __fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071 fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082 rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057 rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062 addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705 addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753 call_netdevice_notifiers_extack net/core/dev.c:1765 [inline] call_netdevice_notifiers net/core/dev.c:1779 [inline] dev_close_many+0x33f/0x6f0 net/core/dev.c:1522 rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177 rollback_registered+0x109/0x1d0 net/core/dev.c:8242 unregister_netdevice_queue net/core/dev.c:9289 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282 unregister_netdevice include/linux/netdevice.h:2658 [inline] __tun_detach+0xd5b/0x1000 drivers/net/tun.c:727 tun_detach drivers/net/tun.c:744 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443 __fput+0x2e5/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x90a/0x2fa0 kernel/exit.c:876 do_group_exit+0x135/0x370 kernel/exit.c:980 __do_sys_exit_group kernel/exit.c:991 [inline] __se_sys_exit_group kernel/exit.c:989 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9 RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043 RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1 R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800 Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30l2ip: fix possible use-after-freeEric Dumazet1-4/+4
Before taking a refcount on a rcu protected structure, we need to make sure the refcount is not zero. syzbot reported : refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline] WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67 RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1 R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968 R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440 l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline] l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173 pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702 __sys_connect+0x266/0x330 net/socket.c:1808 __do_sys_connect net/socket.c:1819 [inline] __se_sys_connect net/socket.c:1816 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1816 Fixes: 54652eb12c1b ("l2tp: hold tunnel while looking up sessions in l2tp_netlink") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30appletalk: Set error code if register_snap_client failedYueHaibing1-0/+1
If register_snap_client fails in atalk_init, error code should be set, otherwise it will triggers NULL pointer dereference while unloading module. Fixes: 9804501fa122 ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30rxrpc: Fix net namespace cleanupDavid Howells1-16/+16
In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the ->calls list is empty, emitting error messages if not, and (2) wait for the RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0). To avoid taking the call_lock, the function prechecks ->calls and if empty, it returns to avoid taking the lock - this is wrong, however: it still needs to go and do the second phase and wait for ->nr_calls to become 0. Without this, the rxrpc_net struct may get deallocated before we get to the RCU cleanup for the last calls. This can lead to: Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384 050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k slab). Fix this by flipping the condition on the if-statement, putting the locked section inside the if-body and dropping the return from there. The function will then always go on to wait for the RCU cleanup on outstanding calls. Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30Merge branch 'master' of ↵David S. Miller11-48/+68
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-04-30 1) Fix an out-of-bound array accesses in __xfrm_policy_unlink. From YueHaibing. 2) Reset the secpath on failure in the ESP GRO handlers to avoid dereferencing an invalid pointer on error. From Myungho Jung. 3) Add and revert a patch that tried to add rcu annotations to netns_xfrm. From Su Yanjun. 4) Wait for rcu callbacks before freeing xfrm6_tunnel_spi_kmem. From Su Yanjun. 5) Fix forgotten vti4 ipip tunnel deregistration. From Jeremy Sowden: 6) Remove some duplicated log messages in vti4. From Jeremy Sowden. 7) Don't use IPSEC_PROTO_ANY when flushing states because this will flush only IPsec portocol speciffic states. IPPROTO_ROUTING states may remain in the lists when doing net exit. Fix this by replacing IPSEC_PROTO_ANY with zero. From Cong Wang. 8) Add length check for UDP encapsulation to fix "Oversized IP packet" warnings on receive side. From Sabrina Dubroca. 9) Fix xfrm interface lookup when the interface is associated to a vrf layer 3 master device. From Martin Willi. 10) Reload header pointers after pskb_may_pull() in _decode_session4(), otherwise we may read from uninitialized memory. 11) Update the documentation about xfrm[46]_gc_thresh, it is not used anymore after the flowcache removal. From Nicolas Dichtel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ipv6/flowlabel: wait rcu grace period before put_pid()Eric Dumazet1-6/+12
syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when ↵Stephen Suryaputra1-6/+17
sending dest unreach When there is no route to an IPv6 dest addr, skb_dst(skb) points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail on icmpv6_send() and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev. To reproduce: * Gateway configuration: ip link add dev vrf_258 type vrf table 258 ip link set dev enp0s9 master vrf_258 ip addr add 66:1/64 dev enp0s9 ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1 sysctl -w net.ipv6.conf.enp0s9.forwarding=1 * Sender configuration: ip addr add 66::2/64 dev enp0s9 ip -6 route add default via 66::1 and ping 67::1 for example from the sender. Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup. v2: Fix typo of destination address in the repro steps. v3: Simplify the loopback check (per David Ahern) and use reverse Christmas tree format (per David Miller). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29tcp: add sanity tests in tcp_add_backlog()Eric Dumazet1-1/+12
Richard and Bruno both reported that my commit added a bug, and Bruno was able to determine the problem came when a segment wih a FIN packet was coalesced to a prior one in tcp backlog queue. It turns out the header prediction in tcp_rcv_established() looks back to TCP headers in the packet, not in the metadata (aka TCP_SKB_CB(skb)->tcp_flags) The fast path in tcp_rcv_established() is not supposed to handle a FIN flag (it does not call tcp_fin()) Therefore we need to make sure to propagate the FIN flag, so that the coalesced packet does not go through the fast path, the same than a GRO packet carrying a FIN flag. While we are at it, make sure we do not coalesce packets with RST or SYN, or if they do not have ACK set. Many thanks to Richard and Bruno for pinpointing the bad commit, and to Richard for providing a first version of the fix. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org> Reported-by: Bruno Prémont <bonbons@sysophe.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ipv6: invert flowlabel sharing check in process and user modeWillem de Bruijn1-2/+2
A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29Merge tag 'mac80211-for-davem-2019-04-26' of ↵David S. Miller4-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== * fix use-after-free in mac80211 TXQs * fix RX STBC byte order * fix debugfs rename crashing due to ERR_PTR() * fix missing regulatory notification ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27udp: fix GRO reception in case of length mismatchPaolo Abeni1-4/+5
Currently, the UDP GRO code path does bad things on some edge conditions - Aggregation can happen even on packet with different lengths. Fix the above by rewriting the 'complete' condition for GRO packets. While at it, note explicitly that we allow merging the first packet per burst below gso_size. Reported-by: Sean Tong <seantong114@gmail.com> Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net/tls: fix copy to fragments in reencryptJakub Kicinski1-7/+22
Fragments may contain data from other records so we have to account for that when we calculate the destination and max length of copy we can perform. Note that 'offset' is the offset within the message, so it can't be passed as offset within the frag.. Here skb_store_bits() would have realised the call is wrong and simply not copy data. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net/tls: don't copy negative amounts of data in reencryptJakub Kicinski1-6/+8
There is no guarantee the record starts before the skb frags. If we don't check for this condition copy amount will get negative, leading to reads and writes to random memory locations. Familiar hilarity ensues. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26genetlink: use idr_alloc_cyclic for family->id assignmentMarcel Holtmann1-2/+2
When allocating the next family->id it makes more sense to use idr_alloc_cyclic to avoid re-using a previously used family->id as much as possible. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26l2tp: use rcu_dereference_sk_user_data() in l2tp_udp_encap_recv()Eric Dumazet1-1/+1
Canonical way to fetch sk_user_data from an encap_rcv() handler called from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(), otherwise compiler might read it multiple times. Fixes: d00fa9adc528 ("il2tp: fix races with tunnel socket close") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25net-sysfs: Replace ktype default_attrs field with groupsKimberly Brown1-2/+4
The kobj_type default_attrs field is being replaced by the default_groups field. Replace the default_attrs fields in rx_queue_ktype and netdev_queue_ktype with default_groups. Use the ATTRIBUTE_GROUPS macro to create rx_queue_default_groups and netdev_queue_default_groups. This patch was tested by verifying that the sysfs files for the attributes in the default groups were created. Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers7-9/+0
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds25-135/+260
Pull networking fixes from David Miller: "Just the usual assortment of small'ish fixes: 1) Conntrack timeout is sometimes not initialized properly, from Alexander Potapenko. 2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid undefined behavior. From ZhangXiaoxu. 3) des1 field of descriptor in stmmac driver is initialized with the wrong variable. From Yue Haibing. 4) Increase mlxsw pci sw reset timeout a little bit more, from Ido Schimmel. 5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng. 6) Fallback refcount fix in TLS code, from Jakub Kicinski. 7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy. 8) Fix recursive locking in team driver, from Hangbin Liu. 9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski. 10) Don't use napi_alloc_frag() outside of softiq context of socionext driver, from Ilias Apalodimas. 11) MAC address increment overflow in ncsi, from Tao Ren. 12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun. 13) ipv4_link_failure has to validate the headers that are actually there because RAW sockets can pass in arbitrary garbage, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add sanity checks in ipv4_link_failure() net/rose: fix unbound loop in rose_loopback_timer() rxrpc: fix race condition in rxrpc_input_packet() net: rds: exchange of 8K and 1M pool net: vrf: Fix operation not supported when set vrf mac net/ncsi: handle overflow when incrementing mac address net: socionext: replace napi_alloc_frag with the netdev variant on init net: atheros: fix spelling mistake "underun" -> "underrun" spi: ST ST95HF NFC: declare missing of table spi: Micrel eth switch: declare missing of table net: stmmac: move stmmac_check_ether_addr() to driver probe netfilter: fix nf_l4proto_log_invalid to log invalid packets netfilter: never get/set skb->tstamp netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK dt-bindings: add an explanation for internal phy-mode net/tls: don't leak IV and record seq when offload fails net/tls: avoid potential deadlock in tls_set_device_offload_rx() selftests/net: correct the return value for run_afpackettests team: fix possible recursive locking when add slaves ...
2019-04-24ipv4: add sanity checks in ipv4_link_failure()Eric Dumazet1-9/+23
Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net/rose: fix unbound loop in rose_loopback_timer()Eric Dumazet1-11/+16
This patch adds a limit on the number of skbs that fuzzers can queue into loopback_queue. 1000 packets for rose loopback seems more than enough. Then, since we now have multiple cpus in most linux hosts, we also need to limit the number of skbs rose_loopback_timer() can dequeue at each round. rose_loopback_queue() can be drop-monitor friendly, calling consume_skb() or kfree_skb() appropriately. Finally, use mod_timer() instead of del_timer() + add_timer() syzbot report was : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34 rcu: (t=10500 jiffies g=140321 q=323) rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1 rcu: RCU grace-period kthread stack dump: rcu_preempt I29168 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2877 [inline] __schedule+0x813/0x1cc0 kernel/sched/core.c:3518 schedule+0x92/0x180 kernel/sched/core.c:3562 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline] rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events iterate_cleanup_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223 print_cpu_stall kernel/rcu/tree.c:1360 [inline] check_cpu_stall kernel/rcu/tree.c:1434 [inline] rcu_pending kernel/rcu/tree.c:3103 [inline] rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95 Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60 RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56 RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228 RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0 R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24rxrpc: fix race condition in rxrpc_input_packet()Eric Dumazet2-5/+10
After commit 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook"), rxrpc_input_packet() is directly called from lockless UDP receive path, under rcu_read_lock() protection. It must therefore use RCU rules : - udp_sk->sk_user_data can be cleared at any point in this function. rcu_dereference_sk_user_data() is what we need here. - Also, since sk_user_data might have been set in rxrpc_open_socket() we must observe a proper RCU grace period before kfree(local) in rxrpc_lookup_local() v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com> and Julia Lawall <julia.lawall@lip6.fr>, thanks ! v3,v2 : addressed David Howells feedback, thanks ! syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573 Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4 RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001 R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000 R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0 Call Trace: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline] rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202 napi_frags_finish net/core/dev.c:5769 [inline] napi_gro_frags+0xade/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net: rds: exchange of 8K and 1M poolZhu Yanjun2-3/+11
Before the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea5967b0d ("RDS: IB: move FMR code to its own file") Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net/ncsi: handle overflow when incrementing mac addressTao Ren1-1/+5
Previously BMC's MAC address is calculated by simply adding 1 to the last byte of network controller's MAC address, and it produces incorrect result when network controller's MAC address ends with 0xFF. The problem can be fixed by calling eth_addr_inc() function to increment MAC address; besides, the MAC address is also validated before assigning to BMC. Fixes: cb10c7c0dfd9 ("net/ncsi: Add NCSI Broadcom OEM command") Signed-off-by: Tao Ren <taoren@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23Merge tag 'nfsd-5.1-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-0/+3
Pull nfsd bugfixes from Bruce Fields: "Fix miscellaneous nfsd bugs, in NFSv4.1 callbacks, NFSv4.1 lock-notification callbacks, NFSv3 readdir encoding, and the cache/upcall code" * tag 'nfsd-5.1-1' of git://linux-nfs.org/~bfields/linux: nfsd: wake blocked file lock waiters before sending callback nfsd: wake waiters blocked on file_lock before deleting it nfsd: Don't release the callback slot unless it was actually held nfsd/nfsd3_proc_readdir: fix buffer count and page pointers sunrpc: don't mark uninitialised items as VALID.
2019-04-23mac80211: don't attempt to rename ERR_PTR() debugfs dirsJohannes Berg1-1/+1
We need to dereference the directory to get its parent to be able to rename it, so it's clearly not safe to try to do this with ERR_PTR() pointers. Skip in this case. It seems that this is most likely what was causing the report by syzbot, but I'm not entirely sure as it didn't come with a reproducer this time. Cc: stable@vger.kernel.org Reported-by: syzbot+4ece1a28b8f4730547c9@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-23cfg80211: Notify previous user request during self managed wiphy registrationSriram R1-3/+2
Commit c82c06ce43d3("cfg80211: Notify all User Hints To self managed wiphys") notified all new user hints to self managed wiphy's after device registration. But it didn't do this for anything other than cell base hints done before registration. This needs to be done during wiphy registration of a self managed device also, so that the previous user settings are retained. Fixes: c82c06ce43d3 ("cfg80211: Notify all User Hints To self managed wiphys") Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-23mac80211: Fix kernel panic due to use of txq after freeBhagavathi Perumal S1-0/+3
The txq of vif is added to active_txqs list for ATF TXQ scheduling in the function ieee80211_queue_skb(), but it was not properly removed before freeing the txq object. It was causing use after free of the txq objects from the active_txqs list, result was kernel panic due to invalid memory access. Fix kernel invalid memory access by properly removing txq object from active_txqs list before free the object. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller12-95/+174
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Add a selftest for icmp packet too big errors with conntrack, from Florian Westphal. 2) Validate inner header in ICMP error message does not lie to us in conntrack, also from Florian. 3) Initialize ct->timeout to calm down KASAN, from Alexander Potapenko. 4) Skip ICMP error messages from tunnels in IPVS, from Julian Anastasov. 5) Use a hash to expose conntrack and expectation ID, from Florian Westphal. 6) Prevent shift wrap in nft_chain_parse_hook(), from Dan Carpenter. 7) Fix broken ICMP ID randomization with NAT, also from Florian. 8) Remove WARN_ON in ebtables compat that is reached via syzkaller, from Florian Westphal. 9) Fix broken timestamps since fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC"), from Florian. 10) Fix logging of invalid packets in conntrack, from Andrei Vagin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22netfilter: fix nf_l4proto_log_invalid to log invalid packetsAndrei Vagin1-1/+1
It doesn't log a packet if sysctl_log_invalid isn't equal to protonum OR sysctl_log_invalid isn't equal to IPPROTO_RAW. This sentence is always true. I believe we need to replace OR to AND. Cc: Florian Westphal <fw@strlen.de> Fixes: c4f3db1595827 ("netfilter: conntrack: add and use nf_l4proto_log_invalid") Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-22netfilter: never get/set skb->tstampFlorian Westphal4-16/+18
setting net.netfilter.nf_conntrack_timestamp=1 breaks xmit with fq scheduler. skb->tstamp might be "refreshed" using ktime_get_real(), but fq expects CLOCK_MONOTONIC. This patch removes all places in netfilter that check/set skb->tstamp: 1. To fix the bogus "start" time seen with conntrack timestamping for outgoing packets, never use skb->tstamp and always use current time. 2. In nfqueue and nflog, only use skb->tstamp for incoming packets, as determined by current hook (prerouting, input, forward). 3. xt_time has to use system clock as well rather than skb->tstamp. We could still use skb->tstamp for prerouting/input/foward, but I see no advantage to make this conditional. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Cc: Eric Dumazet <edumazet@google.com> Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-22netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ONFlorian Westphal1-1/+2
It means userspace gave us a ruleset where there is some other data after the ebtables target but before the beginning of the next rule. Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by: syzbot+659574e7bcc7f7eb4df7@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-20net/tls: don't leak IV and record seq when offload failsJakub Kicinski3-6/+4
When device refuses the offload in tls_set_device_offload_rx() it calls tls_sw_free_resources_rx() to clean up software context state. Unfortunately, tls_sw_free_resources_rx() does not free all the state tls_set_sw_offload() allocated - it leaks IV and sequence number buffers. All other code paths which lead to tls_sw_release_resources_rx() (which tls_sw_free_resources_rx() calls) free those right before the call. Avoid the leak by moving freeing of iv and rec_seq into tls_sw_release_resources_rx(). Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20net/tls: avoid potential deadlock in tls_set_device_offload_rx()Jakub Kicinski1-0/+2
If device supports offload, but offload fails tls_set_device_offload_rx() will call tls_sw_free_resources_rx() which (unhelpfully) releases and reacquires the socket lock. For a small fix release and reacquire the device_offload_lock. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>