summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2009-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds24-99/+172
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (95 commits) b44: GFP_DMA skb should not escape from driver korina: do not use IRQF_SHARED with IRQF_DISABLED korina: do not stop queue here korina: fix handling tx_chain_tail korina: do tx at the right position korina: do schedule napi after testing for it korina: rework korina_rx() for use with napi korina: disable napi on close and restart korina: reset resource buffer size to 1536 korina: fix usage of driver_data bnx2x: First slow path interrupt race bnx2x: MTU Filter bnx2x: Indirection table initialization index bnx2x: Missing brackets bnx2x: Fixing the doorbell size bnx2x: Endianness issues bnx2x: VLAN tagged packets without VLAN offload bnx2x: Protecting the link change indication bnx2x: Flow control updated before reporting the link bnx2x: Missing mask when calculating flow control ...
2009-01-159p: disallow RDMA if RDMA CM isn't availableRoland Dreier1-1/+1
If INET=y and INFINIBAND=y, but IPV6=m then INFINIBAND_ADDR_TRANS is set to n and the RDMA CM functions rdma_connect() et al are not built. However, the current config dependencies allow NET_9P_RDMA to be selected in this, which leads to a build failure. Fix this by adding a dependency on INFINIBAND_ADDR_TRANS to disallow NET_9P_RDMA in this case. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14can: fix slowpath issue in hrtimer callback functionOliver Hartkopp1-27/+30
Due to the loopback functionality in can_send() we can not invoke it from hardirq context which was done inside the bcm_tx_timeout_handler() hrtimer callback: [ 700.361154] [<c012228c>] warn_slowpath+0x80/0xb6 [ 700.361163] [<c013d559>] valid_state+0x125/0x136 [ 700.361171] [<c013d858>] mark_lock+0x18e/0x332 [ 700.361180] [<c013e300>] __lock_acquire+0x12e/0xb1e [ 700.361189] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361198] [<c031e20a>] dev_queue_xmit+0x191/0x479 [ 700.361206] [<c01262a7>] __local_bh_disable+0x2b/0x64 [ 700.361213] [<c031e20a>] dev_queue_xmit+0x191/0x479 [ 700.361225] [<f8aa69a1>] can_send+0xd7/0x11a [can] [ 700.361235] [<f8ab522b>] bcm_can_tx+0x9d/0xd9 [can_bcm] [ 700.361245] [<f8ab597f>] bcm_tx_timeout_handler+0x6a/0xbc [can_bcm] [ 700.361255] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361263] [<c0134143>] __run_hrtimer+0x5a/0x86 [ 700.361273] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361282] [<c0134a50>] hrtimer_interrupt+0xb9/0x110 This patch moves the rest of the functionality from the hrtimer callback to the already existing tasklet to fix this slowpath problem. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14net: Add init_dummy_netdev() and fix EMAC driver using itBenjamin Herrenschmidt1-0/+39
This adds an init_dummy_netdev() function that gets a network device structure (allocation and lifetime entirely under caller's control) and initialize the minimum amount of fields so it can be used to schedule NAPI polls without registering a full blown interface. This is to be used by drivers that need to tie several hardware interfaces to a single NAPI poll scheduler due to HW limitations. It also updates the ibm_newemac driver to use that, this fixing the oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add() Symbol is exported GPL only a I don't think we want binary drivers doing that sort of acrobatics (if we want them at all). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gso: Ensure that the packet is long enoughHerbert Xu1-6/+7
When we get a GSO packet from an untrusted source, we need to ensure that it is sufficiently long so that we don't end up crashing. Based on discovery and patch by Ian Campbell. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Fix page ref count for skbs freed normallyHerbert Xu2-6/+6
When an skb with page frags is merged into an existing one, we cannibalise its reference count. This is OK when the skb is reused because we set nr_frags to zero in that case. However, for the case where the skb is freed through kfree_skb, we didn't clear nr_frags which causes the page to be freed prematurely. This is fixed by moving the skb resetting into skb_gro_receive. Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14xfrm: For 32/64 compatability wrt. xfrm_usersa_infoDavid S. Miller1-2/+9
Reported by Jiri Klimes. Fix suggested by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Check for GSO packets and packets with frag_listHerbert Xu1-0/+3
As GRO cannot be applied to packets with frag_list we need to make sure that we reject such packets if they are fed to us, e.g., through a tunnel device. Also there is no point in applying GRO on GSO packets so they too should be rejected. This allows GRO to be used in virtio-net which may produce GSO packets directly but may still benefit from GRO if the other end of it doesn't support GSO. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14[CVE-2009-0029] System call wrappers part 22Heiko Carstens1-15/+16
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14[CVE-2009-0029] System call wrappers part 21Heiko Carstens1-15/+15
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14[CVE-2009-0029] System call wrappers part 07Heiko Carstens1-1/+1
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-13ipv6: Fix fib6_dump_table walker leakHerbert Xu1-7/+8
When a fib6 table dump is prematurely ended, we won't unlink its walker from the list. This causes all sorts of grief for other users of the list later. Reported-by: Chris Caputo <ccaputo@alt.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13tcp: splice as many packets as possible at onceWilly Tarreau1-2/+9
As spotted by Willy Tarreau, current splice() from tcp socket to pipe is not optimal. It processes at most one segment per call. This results in low performance and very high overhead due to syscall rate when splicing from interfaces which do not support LRO. Willy provided a patch inside tcp_splice_read(), but a better fix is to let tcp_read_sock() process as many segments as possible, so that tcp_rcv_space_adjust() and tcp_cleanup_rbuf() are called less often. With this change, splice() behaves like tcp_recvmsg(), being able to consume many skbs in one system call. With typical 1460 bytes of payload per frame, that means splice(SPLICE_F_NONBLOCK) can return 16*1460 = 23360 bytes. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13Merge branch 'master' of ↵David S. Miller4-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-01-13mac80211: fix "‘ret’ may be used uninitialized" warningJohn W. Linville1-1/+1
net/mac80211/ht.c: In function ‘ieee80211_start_tx_ba_session’: net/mac80211/ht.c:472: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12pkt_sched: sch_htb: Break all htb_do_events() after 2 jiffiesJarek Poplawski1-3/+6
Currently htb_do_events() breaks events recounting for a level after 2 jiffies, but there is no reason to repeat this for next levels and increase delays even more (with softirqs disabled). htb_dequeue_tree() can add to this too, btw. In such a case q->now time is invalid anyway. Thanks to Patrick McHardy for spotting an error around earlier version of this patch. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12pkt_sched: sch_htb: Consider used jiffies in htb_do_events()Jarek Poplawski1-3/+3
Next event time should consider jiffies used for recounting. Otherwise qdisc_watchdog_schedule() triggers hrtimer immediately with the event in the past, and may cause very high ksoftirqd cpu usage (if highres is on). There is also removed checking "event" for zero in htb_dequeue(): it's always true in this place. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 08/09: xt_time: print timezone for user informationJan Engelhardt1-0/+11
netfilter: xt_time: print timezone for user information Let users have a way to figure out if their distro set the kernel timezone at all. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 07/09: simplify nf_conntrack_alloc() error handlingJulia Lawall2-3/+3
nf_conntrack_alloc cannot return NULL, so there is no need to check for NULL before using the value. I have also removed the initialization of ct to NULL in nf_conntrack_alloc, since the value is never used, and since perhaps it might lead one to think that return ct at the end might return NULL. The semantic patch that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match exists@ expression x, E; position p1,p2; statement S1, S2; @@ x@p1 = nf_conntrack_alloc(...) ... when != x = E ( if (x@p2 == NULL || ...) S1 else S2 | if (x@p2 == NULL && ...) S1 else S2 ) @other_match exists@ expression match.x, E1, E2; position p1!=match.p1,match.p2; @@ x@p1 = E1 ... when != x = E2 x@p2 @ script:python depends on !other_match@ p1 << match.p1; p2 << match.p2; @@ print "%s: call to nf_conntrack_alloc %s bad test %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 06/09: nf_conntrack: fix ICMP/ICMPv6 timeout sysctls on big-endianPatrick McHardy2-2/+2
An old bug crept back into the ICMP/ICMPv6 conntrack protocols: the timeout values are defined as unsigned longs, the sysctl's maxsize is set to sizeof(unsigned int). Use unsigned int for the timeout values as in the other conntrack protocols. Reported-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 05/09: ebtables: fix inversion in match codeJan Engelhardt1-1/+1
Commit 8cc784ee (netfilter: change return types of match functions for ebtables extensions) broke ebtables matches by inverting the sense of match/nomatch. Reported-by: Matt Cross <matthltc@us.ibm.com> Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 04/09: x_tables: fix match/target revision lookupPatrick McHardy1-0/+8
Commit 55b69e91 (netfilter: implement NFPROTO_UNSPEC as a wildcard for extensions) broke revision probing for matches and targets that are registered with NFPROTO_UNSPEC. Fix by continuing the search on the NFPROTO_UNSPEC list if nothing is found on the af-specific lists. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 03/09: bridge: Disable PPPOE/VLAN processing by defaultHerbert Xu1-4/+4
The PPPOE/VLAN processing code in the bridge netfilter is broken by design. The VLAN tag and the PPPOE session ID are an integral part of the packet flow information, yet they're completely ignored by the bridge netfilter. This is potentially a security hole as it treats all VLANs and PPPOE sessions as the same. What's more, it's actually broken for PPPOE as the bridge netfilter tries to trim the packets to the IP length without adjusting the PPPOE header (and adjusting the PPPOE header isn't much better since the PPPOE peer may require the padding to be present). Therefore we should disable this by default. It does mean that people relying on this feature may lose networking depending on how their bridge netfilter rules are configured. However, IMHO the problems this code causes are serious enough to warrant this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 02/09: bridge: Fix handling of non-IP packets in FORWARD/POST_ROUTINGHerbert Xu1-2/+8
Currently the bridge FORWARD/POST_ROUTING chains treats all non-IPv4 packets as IPv6. This packet fixes that by returning NF_ACCEPT on non-IP packets instead, just as is done in PRE_ROUTING. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12netfilter 01/09: remove "happy cracking" messagePatrick McHardy5-25/+5
Don't spam logs for locally generated short packets. these can only be generated by root. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12mac80211: initialize RC data for all mesh links upon allocationChristian Lamparter1-0/+1
This patch fixes a panic that might occur, if the device is part of a mesh and tries to send with a higher rate index than "0". kernel BUG at net/mac80211/rate.c:239! invalid opcode: 0000 [#1] SMP [...] Call Trace: <IRQ> <0> ? invoke_tx_handlers+0x474/0xb57 [mac80211] ? __ieee80211_tx_prepare+0x260/0x2a8 [mac80211] ? ieee80211_master_start_xmit+0x300/0x43a [mac80211] ? __qdisc_run+0xde/0x1da ? net_tx_action+0xb4/0x102 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12mac80211: allow mode change if IBSS is not allowedPavel Roskin1-1/+2
Changing mode on an interface is not allowed if IBSS is disabled for the current channel. That restriction should only apply when switching to the ad-hoc mode, as it was prior to "cfg80211: handle SIOCGIWMODE/SIOCSIWMODE". Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12minstrel: fix warning if lowest supported rate index is not 0Christian Lamparter1-4/+6
This patch fixes the following WARNING (caused by rix_to_ndx): " >WARNING: at net/mac80211/rc80211_minstrel.c:69 minstrel_rate_init+0xd2/0x33a [mac80211]() >[...] >Call Trace: > warn_on_slowpath+0x51/0x75 > _format_mac_addr+0x4c/0x88 > minstrel_rate_init+0xd2/0x33a [mac80211] > print_mac+0x16/0x1b > schedule_hrtimeout_range+0xdc/0x107 > ieee80211_add_station+0x158/0x1bd [mac80211] > nl80211_new_station+0x1b3/0x20b [cfg80211] The reason is that I'm experimenting with "g" only mode on a 802.11 b/g card. Therefore rate_lowest_index returns 4 (= 6Mbit, instead of usual 0 = 1Mbit). Since mi->r array is initialized with zeros in minstrel_alloc_sta, rix_to_ndx has a hard time to find the 6Mbit entry and will trigged the WARNING. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-11net_dma: acquire/release dma channels on ifup/ifdownDan Williams1-3/+10
The recent dmaengine rework removed the capability to remove dma device driver modules while net_dma is active. Rather than notify dmaengine-clients that channels are trying to be removed, we now rely on clients to notify dmaengine when they no longer have a need for channels. Teach net_dma to release channels by taking dmaengine references at netdevice open and dropping references at netdevice close. Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11dccp ccid-3: Fix RFC referenceGerrit Renker1-1/+1
Thanks to Wei and Arnaldo for pointing out the correct new reference for CCID-3. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11net: fix section mismatch warnings in dccp/ccids/lib/tfrc.cLeonardo Potenza1-1/+1
Removed the __exit annotation of tfrc_lib_exit(), in order to suppress the following section mismatch messages: WARNING: net/dccp/dccp.o(.text+0xd9): Section mismatch in reference from the function ccid_cleanup_builtins() to the function .exit.text:tfrc_lib_exit() The function ccid_cleanup_builtins() references a function in an exit section. Often the function tfrc_lib_exit() has valid usage outside the exit section and the fix is to remove the __exit annotation of tfrc_lib_exit. WARNING: net/dccp/dccp.o(.init.text+0x48): Section mismatch in reference from the function ccid_initialize_builtins() to the function .exit.text:tfrc_lib_exit() The function __init ccid_initialize_builtins() references a function __exit tfrc_lib_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of tfrc_lib_exit() so it may be used outside an exit section. Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11net/bridge/netfilter: move a dereference below a NULL testJulia Lawall1-1/+2
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11net/tipc/bcast.h: use ARRAY_SIZEJulia Lawall1-1/+1
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ #include <linux/kernel.h> @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11ipcomp: Remove spurious truesize increaseHerbert Xu1-1/+0
When I made ipcomp use frags, I forgot to take out the original truesize update that was added for pskb_expand_head. As we no longer expand the head of skb, that update should have been removed. This bug is not related to the truesize warnings since we only made it bigger than what it should've been. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-09Merge branch 'next' of ↵Linus Torvalds5-151/+9
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (22 commits) ioat: fix self test for multi-channel case dmaengine: bump initcall level to arch_initcall dmaengine: advertise all channels on a device to dma_filter_fn dmaengine: use idr for registering dma device numbers dmaengine: add a release for dma class devices and dependent infrastructure ioat: do not perform removal actions at shutdown iop-adma: enable module removal iop-adma: kill debug BUG_ON iop-adma: let devm do its job, don't duplicate free dmaengine: kill enum dma_state_client dmaengine: remove 'bigref' infrastructure dmaengine: kill struct dma_client and supporting infrastructure dmaengine: replace dma_async_client_register with dmaengine_get atmel-mci: convert to dma_request_channel and down-level dma_slave dmatest: convert to dma_request_channel dmaengine: introduce dma_request_channel and private channels net_dma: convert to dma_find_channel dmaengine: provide a common 'issue_pending_all' implementation dmaengine: centralize channel allocation, introduce dma_find_channel dmaengine: up-level reference counting to the module level ...
2009-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds20-133/+432
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (84 commits) wimax: fix kernel-doc for debufs_dentry member of struct wimax_dev net: convert pegasus driver to net_device_ops bnx2x: Prevent eeprom set when driver is down net: switch kaweth driver to netdevops pcnet32: round off carrier watch timer i2400m/usb: wrap USB power saving in #ifdef CONFIG_PM wimax: testing for rfkill support should also test for CONFIG_RFKILL_MODULE wimax: fix kconfig interactions with rfkill and input layers wimax: fix '#ifndef CONFIG_BUG' layout to avoid warning r6040: bump release number to 0.20 r6040: warn about MAC address being unset r6040: check PHY status when bringing interface up r6040: make printks consistent with DRV_NAME gianfar: Fixup use of BUS_ID_SIZE mlx4_en: Returning real Max in get_ringparam mlx4_en: Consider inline packets on completion netdev: bfin_mac: enable bfin_mac net dev driver for BF51x qeth: convert to net_device_ops vlan: add neigh_setup dm9601: warn on invalid mac address ...
2009-01-08wimax: testing for rfkill support should also test for CONFIG_RFKILL_MODULEInaky Perez-Gonzalez1-1/+1
Current WiMAX rfkill code is missing the case where rfkill is compiled in as modules and works only when rfkill is compiled in. This is not correct. Fixed to test for CONFIG_RFKILL or CONFIG_RKILL_MODULE. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08wimax: fix kconfig interactions with rfkill and input layersInaky Perez-Gonzalez1-0/+14
WiMAX can work without RFKILL, but it was missing a check to make sure RFKILL is not being made a module with wimax compiled into the kernel. This caused failed builds in s390, where CONFIG_INPUT is always off. When RFKILL is enabled, the code uses the input layer to report hardware switch changes; thus, if RFKILL is enabled, INPUT has to be too. It also needs to display some message when INPUT is disabled that explains why WiMAX is not selectable. (issues found by Randy Dunlap in the linux-next tree). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08wimax: fix '#ifndef CONFIG_BUG' layout to avoid warningInaky Perez-Gonzalez1-3/+5
Reported by Randy Dunlap: > Also, this warning needs to be fixed: > > linux-next-20090106/net/wimax/id-table.c:133: warning: ISO C90 > forbids mixed declarations and code Move the return on #defined(CONFIG_BUG) below the variable declarations so it doesn't violate ISO C90. On wimax_id_table_release() we want to do a debug check if CONFIG_BUG is enabled. However, we also want the debug code to be always compiled to ensure there is no bitrot. It will be optimized out by the compiler when CONFIG_BUG is disabled. Added a note to the function header stating this. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08Merge branch 'master' of ↵David S. Miller32-206/+2690
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-01-08vlan: add neigh_setupFrank Blaschka1-0/+14
In case the real device has a neigh_setup function, this neigh_setup function should be used for the vlan device. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08tcp6: Add GRO supportHerbert Xu2-4/+43
This patch adds GRO support for TCP over IPv6. The code is exactly the same as the IPv4 version except for the pseudo-header checksum computation. Note that I've removed the unused tcphdr argument from tcp_v6_check rather than invent a bogus value for GRO. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08ipv6: Add GRO supportHerbert Xu1-5/+102
This patch adds GRO support for IPv6. IPv6 GRO supports extension headers in the same way as GSO (by using the same infrastructure). It's also simpler compared to IPv4 since we no longer have to worry about fragmentation attributes or header checksums. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08fix similar typos to successfullColy Li1-1/+1
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08remove lots of double-semicolonsFernando Carrijo3-3/+3
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Mark Fasheh <mfasheh@suse.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07phonet: update to net_device_opsStephen Hemminger1-4/+8
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-07bluetooth: driver API updateStephen Hemminger3-27/+19
Convert to net_device_ops and use internal net_device_stats in bnep device. Note: no need for bnep_net_ioctl since if ioctl is not set, then dev_ifsioc handles it by returning -EOPNOTSUPP Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-07appletalk: convert aarp to net_device_opsStephen Hemminger1-2/+3
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-07Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linuxLinus Torvalds7-58/+96
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: (67 commits) nfsd: get rid of NFSD_VERSION nfsd: last_byte_offset nfsd: delete wrong file comment from nfsd/nfs4xdr.c nfsd: git rid of nfs4_cb_null_ops declaration nfsd: dprint each op status in nfsd4_proc_compound nfsd: add etoosmall to nfserrno NFSD: FIDs need to take precedence over UUIDs SUNRPC: The sunrpc server code should not be used by out-of-tree modules svc: Clean up deferred requests on transport destruction nfsd: fix double-locks of directory mutex svc: Move kfree of deferral record to common code CRED: Fix NFSD regression NLM: Clean up flow of control in make_socks() function NLM: Refactor make_socks() function nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT SUNRPC: Ensure the server closes sockets in a timely fashion NFSD: Add documenting comments for nfsctl interface NFSD: Replace open-coded integer with macro NFSD: Fix a handful of coding style issues in write_filehandle() NFSD: clean up failover sysctl function naming ...
2009-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds13-0/+2115
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits) wimax/i2400m: add CREDITS and MAINTAINERS entries wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install i2400m: Makefile and Kconfig i2400m/SDIO: TX and RX path backends i2400m/SDIO: firmware upload backend i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends i2400m/SDIO: header for the SDIO subdriver i2400m/USB: TX and RX path backends i2400m/USB: firmware upload backend i2400m/USB: probe/disconnect, dev init/shutdown and reset backends i2400m/USB: header for the USB bus driver i2400m: debugfs controls i2400m: various functions for device management i2400m: RX and TX data/control paths i2400m: firmware loading and bootrom initialization i2400m: linkage to the networking stack i2400m: Generic probe/disconnect, reset and message passing i2400m: host/device procotol and core driver definitions i2400m: documentation and instructions for usage wimax: Makefile, Kconfig and docbook linkage for the stack ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 14:58:17 +0000