Age | Commit message (Collapse) | Author | Files | Lines |
|
Up till now the IP{,V6}_TRANSPARENT socket options (which actually set
the same bit in the socket struct) have required CAP_NET_ADMIN
privileges to set or clear the option.
- we make clearing the bit not require any privileges.
- we allow CAP_NET_ADMIN to set the bit (as before this change)
- we allow CAP_NET_RAW to set this bit, because raw
sockets already pretty much effectively allow you
to emulate socket transparency.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_fin() only needs socket pointer, we can remove skb and th params.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Daniel Turull reported inaccuracies in pktgen when using low packet
rates, because we call ndelay(val) with values bigger than 20000.
Instead of calling ndelay() for delays < 100us, we can instead loop
calling ktime_now() only.
Reported-by: Daniel Turull <daniel.turull@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 356f039822b (TCP: increase default initial receive
window.), we allow sender to send 10 (TCP_DEFAULT_INIT_RCVWND) segments.
Change tcp_fixup_rcvbuf() to reflect this change, even if no real change
is expected, since sysctl_tcp_rmem[1] = 87380 and this value
is bigger than tcp_fixup_rcvbuf() computed rcvmem (~23720)
Note: Since commit 356f039822b limited default window to maximum of
10*1460 and 2*MSS, we use same heuristic in this patch.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems ip_gre is able to change dev->needed_headroom on the fly.
Its is not legal unfortunately and triggers a BUG in raw_sendmsg()
skb = sock_alloc_send_skb(sk, ... + LL_ALLOCATED_SPACE(rt->dst.dev)
< another cpu change dev->needed_headromm (making it bigger)
...
skb_reserve(skb, LL_RESERVED_SPACE(rt->dst.dev));
We end with LL_RESERVED_SPACE() being bigger than LL_ALLOCATED_SPACE()
-> we crash later because skb head is exhausted.
Bug introduced in commit 243aad83 in 2.6.34 (ip_gre: include route
header_len in max_headroom calculation)
Reported-by: Elmar Vonlanthen <evonlanthen@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Timo Teräs <timo.teras@iki.fi>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I audited all of the callers in the tree and only one of them (pktgen) expects
it to do so. Taking this reference is pretty obviously confusing and error
prone.
In particular I looked at the following commits which switched callers of
(__)skb_frag_set_page to the skb paged fragment api:
6a930b9f163d7e6d9ef692e05616c4ede65038ec cxgb3: convert to SKB paged frag API.
5dc3e196ea21e833128d51eb5b788a070fea1f28 myri10ge: convert to SKB paged frag API.
0e0634d20dd670a89af19af2a686a6cce943ac14 vmxnet3: convert to SKB paged frag API.
86ee8130a46769f73f8f423f99dbf782a09f9233 virtionet: convert to SKB paged frag API.
4a22c4c919c201c2a7f4ee09e672435a3072d875 sfc: convert to SKB paged frag API.
18324d690d6a5028e3c174fc1921447aedead2b8 cassini: convert to SKB paged frag API.
b061b39e3ae18ad75466258cf2116e18fa5bbd80 benet: convert to SKB paged frag API.
b7b6a688d217936459ff5cf1087b2361db952509 bnx2: convert to SKB paged frag API.
804cf14ea5ceca46554d5801e2817bba8116b7e5 net: xfrm: convert to SKB frag APIs
ea2ab69379a941c6f8884e290fdd28c93936a778 net: convert core to skb paged frag APIs
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when use dst_get_neighbour to get neighbour, we need
rcu_read_lock to protect, since dst_get_neighbour uses
rcu_dereference.
The bug was reported by Ari Savolainen <ari.m.savolainen@gmail.com>
[ 105.612095]
[ 105.612096] ===================================================
[ 105.612100] [ INFO: suspicious rcu_dereference_check() usage. ]
[ 105.612101] ---------------------------------------------------
[ 105.612103] include/net/dst.h:91 invoked rcu_dereference_check()
without protection!
[ 105.612105]
[ 105.612106] other info that might help us debug this:
[ 105.612106]
[ 105.612108]
[ 105.612108] rcu_scheduler_active = 1, debug_locks = 0
[ 105.612110] 1 lock held by dnsmasq/2618:
[ 105.612111] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815df8c7>]
rtnl_lock+0x17/0x20
[ 105.612120]
[ 105.612121] stack backtrace:
[ 105.612123] Pid: 2618, comm: dnsmasq Not tainted 3.1.0-rc1 #41
[ 105.612125] Call Trace:
[ 105.612129] [<ffffffff810ccdcb>] lockdep_rcu_dereference+0xbb/0xc0
[ 105.612132] [<ffffffff815dc5a9>] neigh_update+0x4f9/0x5f0
[ 105.612135] [<ffffffff815da001>] ? neigh_lookup+0xe1/0x220
[ 105.612139] [<ffffffff81639298>] arp_req_set+0xb8/0x230
[ 105.612142] [<ffffffff8163a59f>] arp_ioctl+0x1bf/0x310
[ 105.612146] [<ffffffff810baa40>] ? lock_hrtimer_base.isra.26+0x30/0x60
[ 105.612150] [<ffffffff8163fb75>] inet_ioctl+0x85/0x90
[ 105.612154] [<ffffffff815b5520>] sock_do_ioctl+0x30/0x70
[ 105.612157] [<ffffffff815b55d3>] sock_ioctl+0x73/0x280
[ 105.612162] [<ffffffff811b7698>] do_vfs_ioctl+0x98/0x570
[ 105.612165] [<ffffffff811a5c40>] ? fget_light+0x340/0x3a0
[ 105.612168] [<ffffffff811b7bbf>] sys_ioctl+0x4f/0x80
[ 105.612172] [<ffffffff816fdcab>] system_call_fastpath+0x16/0x1b
Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: RongQing <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is just a cleanup.
My testing version of Smatch warns about this:
net/core/filter.c +380 check_load_and_stores(6)
warn: check 'flen' for negative values
flen comes from the user. We try to clamp the values here between 1
and BPF_MAXINSNS but the clamp doesn't work because it could be
negative. This is a bug, but it's not exploitable.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This cleanup patch removes unnecessary include from net/ipv6/ip6_fib.c.
Signed-off-by: Kevin Wilson <wkevils@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ipv4: compat_ioctl is local to af_inet.c, make it static
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
we should decrease ops->unresolved_rules when deleting a unresolved rule.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a sanity check on the values provided by user space for
the hardware time stamping configuration. If the values lie outside of
the absolute limits, then the ioctl request will be denied.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch moves the rcu_barrier from rollback_registered_many
(inside the rtnl_lock) into netdev_run_todo (just outside the rtnl_lock).
This allows us to gain the full benefit of sychronize_net calling
synchronize_rcu_expedited when the rtnl_lock is held.
The rcu_barrier in rollback_registered_many was originally a synchronize_net
but was promoted to be a rcu_barrier() when it was found that people were
unnecessarily hitting the 250ms wait in netdev_wait_allrefs(). Changing
the rcu_barrier back to a synchronize_net is therefore safe.
Since we only care about waiting for the rcu callbacks before we get
to netdev_wait_allrefs() it is also safe to move the wait into
netdev_run_todo.
This was tested by creating and destroying 1000 tap devices and observing
/proc/lock_stat. /proc/lock_stat reports this change reduces the hold
times of the rtnl_lock by a factor of 10. There was no observable
difference in the amount of time it takes to destroy a network device.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It can trivially be replaced with rpc_restart_call_prepare.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Initial cwnd being 10 (TCP_INIT_CWND) instead of 3, change
tcp_fixup_sndbuf() to get more than 16384 bytes (sysctl_tcp_wmem[1]) in
initial sk_sndbuf
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_recycle_check resets the skb if it's eligible for recycling.
However, there are times when a driver might want to optionally
manipulate the skb data with the skb before resetting the skb,
but after it has determined eligibility. We do this by splitting the
eligibility check from the skb reset, creating two inline functions to
accomplish that task.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The transparent socket option setting was not copied to the time wait
socket when an inet socket was being replaced by a time wait socket. This
broke the --transparent option of the socket match and may have caused
that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state
were being dropped by the packet filter.
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To ease skb->truesize sanitization, its better to be able to localize
all references to skb frags size.
Define accessors : skb_frag_size() to fetch frag size, and
skb_frag_size_{set|add|sub}() to manipulate it.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calling icmpv6_send() on a local message size error leads to
an incorrect update of the path mtu. So use xfrm6_local_rxpmtu()
to notify about the pmtu if the IPV6_DONTFRAG socket option is
set on an udp or raw socket, according RFC 3542 and use
ipv6_local_error() otherwise.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip6_append_data() builds packets based on the mtu from dst_mtu(rt->dst.path).
On IPsec the effective mtu is lower because we need to add the protocol
headers and trailers later when we do the IPsec transformations. So after
the IPsec transformations the packet might be too big, which leads to a
slowpath fragmentation then. This patch fixes this by building the packets
based on the lower IPsec mtu from dst_mtu(&rt->dst) and adapts the exthdr
handling to this.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pointer to mtu_info is taken from the common buffer
of the skb, thus it can't be a NULL pointer. This patch
removes this check on mtu_info.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The replay check and replay advance functions had some code
duplications. This patch removes the duplications.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following configuration used to work as I expected. At least
we could use the fcoe interfaces to do MPIO and the bond0 iface
to do load balancing or failover.
---eth2.228-fcoe
|
eth2 -----|
|
|---- bond0
|
eth3 -----|
|
---eth3.228-fcoe
This worked because of a change we added to allow inactive slaves
to rx 'exact' matches. This functionality was kept intact with the
rx_handler mechanism. However now the vlan interface attached to the
active slave never receives traffic because the bonding rx_handler
updates the skb->dev and goto's another_round. Previously, the
vlan_do_receive() logic was called before the bonding rx_handler.
Now by the time vlan_do_receive calls vlan_find_dev() the
skb->dev is set to bond0 and it is clear no vlan is attached
to this iface. The vlan lookup fails.
This patch moves the VLAN check above the rx_handler. A VLAN
tagged frame is now routed to the eth2.228-fcoe iface in the
above schematic. Untagged frames continue to the bond0 as
normal. This case also remains intact,
eth2 --> bond0 --> vlan.228
Here the skb is VLAN tagged but the vlan lookup fails on eth2
causing the bonding rx_handler to be called. On the second
pass the vlan lookup is on the bond0 iface and completes as
expected.
Putting a VLAN.228 on both the bond0 and eth2 device will
result in eth2.228 receiving the skb. I don't think this is
completely unexpected and was the result prior to the rx_handler
result.
Note, the same setup is also used for other storage traffic that
MPIO is used with eg. iSCSI and similar setups can be contrived
without storage protocols.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Bluetooth stack has internal connection handlers for all of the various
Bluetooth protocols, and unfortunately, they are currently lacking the LSM
hooks found in the core network stack's connection handlers. I say
unfortunately, because this can cause problems for users who have have an
LSM enabled and are using certain Bluetooth devices. See one problem
report below:
* http://bugzilla.redhat.com/show_bug.cgi?id=741703
In order to keep things simple at this point in time, this patch fixes the
problem by cloning the parent socket's LSM attributes to the newly created
child socket. If we decide we need a more elaborate LSM marking mechanism
for Bluetooth (I somewhat doubt this) we can always revisit this decision
in the future.
Reported-by: James M. Cape <jcape@ignore-your.tv>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pppol2tp_xmit() calls skb_cow_head(skb, 2) before calling
l2tp_xmit_skb()
Then l2tp_xmit_skb() calls again skb_cow_head(skb, large_headroom)
This patchs changes the first skb_cow_head() call to supply the needed
headroom to make sure at most one (expensive) pskb_expand_head() is
done.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
l2tp_xmit_skb() can leak one skb if skb_cow_head() returns an error.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Need to cleanup bridge device timers and ports when being bridge
device is being removed via netlink.
This fixes the problem of observed when doing:
ip link add br0 type bridge
ip link set dev eth1 master br0
ip link set br0 up
ip link del br0
which would cause br0 to hang in unregister_netdev because
of leftover reference count.
Reported-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fragmented multicast frames are delivered to a single macvlan port,
because ip defrag logic considers other samples are redundant.
Implement a defrag step before trying to send the multicast frame.
Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the TT_RESPONSE packet, the number of carried entries is not correctly set.
This leads to a wrong interpretation of the packet payload on the receiver side
causing random entries to be added to the global translation table. Therefore
the latter gets always corrupted, triggering a table recovery all the time.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
|
|
Currently the counter of tt_local_entry structures (tt_local_num) is incremented
each time the tt_local_reset_flags() is invoked causing the node to send wrong
TT_REPONSE packets containing a copy of non-initialised memory thus corrupting
other nodes global translation table and making higher level communication
impossible.
Reported-by: Junkeun Song <jun361@gmail.com>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Acked-by: Junkeun Song <jun361@gmail.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
|
|
It is only used internally by the RPC code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
rpc_sockaddr2uaddr is only used by net/sunrpc/rpcb_clnt.c, where
it is used in a non-blockable context in at least one case.
Add non-blocking capability by adding a gfp_t argument
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The same function is used by idmap, gss and blocklayout code. Make it
generic.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
|
|
x25_find_listener does not check that the amount of call user data given
in the skb is big enough in per-socket comparisons, hence buffer
overreads may occur. Fix this by adding a check.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are multiple locations in the X.25 packet layer where a skb is
assumed to be of at least a certain size and that all its data is
currently available at skb->data. These assumptions are not checked,
hence buffer overreads may occur. Use pskb_may_pull to check these
minimal size assumptions and ensure that data is available at skb->data
when necessary, as well as use skb_copy_bits where needed.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
X.25 call user data is being copied in its entirety from incoming messages
without consideration to the size of the destination buffers, leading to
possible buffer overflows. Validate incoming call user data lengths before
these copies are performed.
It appears this issue was noticed some time ago, however nothing seemed to
come of it: see http://www.spinics.net/lists/linux-x25/msg00043.html and
commit 8db09f26f912f7c90c764806e804b558da520d4f.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Andrew Hendry <andrew.hendry@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in6_dev_get(dev) takes a reference on struct inet6_dev, we dont need
rcu locking in ndisc_constructor()
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The BerliOS project, which currently hosts our mailinglist, will
close with the end of the year. Now take the chance and remove all
occurrences of the mailinglist address from the source files.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While preparing net flow caches, once a fail may cause potential
memory leak , fix it.
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.infradead.org/users/linville/wireless-next into for-davem
|
|
Add configuration setting for drivers to turn spoof checking on or off
for discrete VFs.
v2 - Fix indentation problem, wrap the ifla_vf_info structure in
#ifdef __KERNEL__ to prevent user space from accessing and
change function paramater for the spoof check setting netdev
op from u8 to bool.
v3 - Preset spoof check setting to -1 so that user space tools such
as ip can detect that the driver didn't report a spoofcheck
setting. Prevents incorrect display of spoof check settings
for drivers that don't report it.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Only station flags that are already defined in nl80211 are added for
now.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Reuse the already existing struct nl80211_sta_flag_update to specify
both, a flag mask and the flag set itself. This means
nl80211_sta_flag_update is now used for setting station flags and also
for getting station flags.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The queue mapping/TID for non-QoS null data
responses to is never set, making it default
to BK. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Reformat the check, the indentation is completely strange.
Also change the last part of the condition to make the
code shorter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
mac80211 already filled in the MCS rate info for rx'ed frames but tx'ed
frames that are sent to a monitor interface during the status callback
lack this information.
Add the radiotap fields for MCS info to ieee80211_tx_status_rtap_hdr
and populate them when sending tx'ed frames to the monitors.
The needed headroom is only extended by one byte since we don't include
legacy rate information in the rtap header for HT frames.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Get rid of the ieee80211_tx_status_rtap_hdr struct and instead build the
rtap header dynamically. This makes it easier to extend the rtap header
generation in the future.
Add ieee80211_tx_radiotap_len to calculate the expected size of the
rtap header before generating it. Since we can't check if the rtap
header fits into the requested headroom during compile time anymore
add a WARN_ON_ONCE.
Also move the actual rtap header generation into its own function.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
skb truesize currently accounts for sk_buff struct and part of skb head.
kmalloc() roundings are also ignored.
Considering that skb_shared_info is larger than sk_buff, its time to
take it into account for better memory accounting.
This patch introduces SKB_TRUESIZE(X) macro to centralize various
assumptions into a single place.
At skb alloc phase, we put skb_shared_info struct at the exact end of
skb head, to allow a better use of memory (lowering number of
reallocations), since kmalloc() gives us power-of-two memory blocks.
Unless SLUB/SLUB debug is active, both skb->head and skb_shared_info are
aligned to cache lines, as before.
Note: This patch might trigger performance regressions because of
misconfigured protocol stacks, hitting per socket or global memory
limits that were previously not reached. But its a necessary step for a
more accurate memory accounting.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Andi Kleen <ak@linux.intel.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|