summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2016-11-04Merge tag 'nfsd-4.9-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds5-47/+82
Pull nfsd bugfixes from Bruce Fields: "Fixes for some recent regressions including fallout from the vmalloc'd stack change (after which we can no longer encrypt stuff on the stack)" * tag 'nfsd-4.9-1' of git://linux-nfs.org/~bfields/linux: nfsd: Fix general protection fault in release_lock_stateid() svcrdma: backchannel cannot share a page for send and rcv buffers sunrpc: fix some missing rq_rbuffer assignments sunrpc: don't pass on-stack memory to sg_set_buf nfsd: move blocked lock handling under a dedicated spinlock
2016-11-01svcrdma: backchannel cannot share a page for send and rcv buffersChuck Lever1-3/+10
The underlying transport releases the page pointed to by rq_buffer during xprt_rdma_bc_send_request. When the backchannel reply arrives, rq_rbuffer then points to freed memory. Fixes: 68778945e46f ('SUNRPC: Separate buffer pointers for RPC ...') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds85-412/+675
Pull networking fixes from David Miller: "Lots of fixes, mostly drivers as is usually the case. 1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey Khoroshilov. 2) Fix element timeouts in netfilter's nft_dynset, from Anders K. Pedersen. 3) Don't put aead_req crypto struct on the stack in mac80211, from Ard Biesheuvel. 4) Several uninitialized variable warning fixes from Arnd Bergmann. 5) Fix memory leak in cxgb4, from Colin Ian King. 6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann. 7) Several VRF semantic fixes from David Ahern. 8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper. 9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet. 10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev. 11) Fix stale link state during failover in NCSCI driver, from Gavin Shan. 12) Fix netdev lower adjacency list traversal, from Ido Schimmel. 13) Propvide proper handle when emitting notifications of filter deletes, from Jamal Hadi Salim. 14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen. 15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac. 16) Several routing offload fixes in mlxsw driver, from Jiri Pirko. 17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy. 18) Validate chunk len before using it in SCTP, from Marcelo Ricardo Leitner. 19) Revert a netns locking change that causes regressions, from Paul Moore. 20) Add recursion limit to GRO handling, from Sabrina Dubroca. 21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon. 22) Avoid accessing stale vxlan/geneve socket in data path, from Pravin Shelar" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits) geneve: avoid using stale geneve socket. vxlan: avoid using stale vxlan socket. qede: Fix out-of-bound fastpath memory access net: phy: dp83848: add dp83822 PHY support enic: fix rq disable tipc: fix broadcast link synchronization problem ibmvnic: Fix missing brackets in init_sub_crq_irqs ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context" arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold net/mlx4_en: Save slave ethtool stats command net/mlx4_en: Fix potential deadlock in port statistics flow net/mlx4: Fix firmware command timeout during interrupt test net/mlx4_core: Do not access comm channel if it has not yet been initialized net/mlx4_en: Fix panic during reboot net/mlx4_en: Process all completions in RX rings after port goes up net/mlx4_en: Resolve dividing by zero in 32-bit system net/mlx4_core: Change the default value of enable_qos net/mlx4_core: Avoid setting ports to auto when only one port type is supported net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec ...
2016-10-29tipc: fix broadcast link synchronization problemJon Paul Maloy6-6/+33
In commit 2d18ac4ba745 ("tipc: extend broadcast link initialization criteria") we tried to fix a problem with the initial synchronization of broadcast link acknowledge values. Unfortunately that solution is not sufficient to solve the issue. We have seen it happen that LINK_PROTOCOL/STATE packets with a valid non-zero unicast acknowledge number may bypass BCAST_PROTOCOL initialization, NAME_DISTRIBUTOR and other STATE packets with invalid broadcast acknowledge numbers, leading to premature opening of the broadcast link. When the bypassed packets finally arrive, they are inadvertently accepted, and the already correctly initialized acknowledge number in the broadcast receive link is overwritten by the invalid (zero) value of the said packets. After this the broadcast link goes stale. We now fix this by marking the packets where we know the acknowledge value is or may be invalid, and then ignoring the acks from those. To this purpose, we claim an unused bit in the header to indicate that the value is invalid. We set the bit to 1 in the initial BCAST_PROTOCOL synchronization packet and all initial ("bulk") NAME_DISTRIBUTOR packets, plus those LINK_PROTOCOL packets sent out before the broadcast links are fully synchronized. This minor protocol update is fully backwards compatible. Reported-by: John Thompson <thompa.atl@gmail.com> Tested-by: John Thompson <thompa.atl@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29rds: debug messages are enabled by defaultshamir rabinovitch2-2/+2
rds use Kconfig option called "RDS_DEBUG" to enable rds debug messages. This option cause the rds Makefile to add -DDEBUG to the rds gcc command line. When CONFIG_DYNAMIC_DEBUG is enabled, the "DEBUG" macro is used by include/linux/dynamic_debug.h to decide if dynamic debug prints should be sent by default to the kernel log. rds should not enable this macro for production builds. rds dynamic debug work as expected follow this fix. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29Merge tag 'mac80211-for-davem-2016-10-27' of ↵David S. Miller1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two fixes: * a fix to process all events while suspending, so any potential calls into the driver are done before it is suspended * small markup fixes for the sphinx documentation conversion that's coming into the tree via the doc tree ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29Merge tag 'batadv-net-for-davem-20161026' of git://git.open-mesh.org/linux-mergeDavid S. Miller3-3/+2
Simon Wunderlich says: ==================== Here are three batman-adv bugfix patches: - Fix RCU usage for neighbor list, by Sven Eckelmann - Fix BATADV_DBG_ALL loglevel to include TP Meter messages, by Sven Eckelmann - Fix possible splat when disabling an interface, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29packet: on direct_xmit, limit tso and csum to supported devicesWillem de Bruijn2-5/+5
When transmitting on a packet socket with PACKET_VNET_HDR and PACKET_QDISC_BYPASS, validate device support for features requested in vnet_hdr. Drop TSO packets sent to devices that do not support TSO or have the feature disabled. Note that the latter currently do process those packets correctly, regardless of not advertising the feature. Because of SKB_GSO_DODGY, it is not sufficient to test device features with netif_needs_gso. Full validate_xmit_skb is needed. Switch to software checksum for non-TSO packets that request checksum offload if that device feature is unsupported or disabled. Note that similar to the TSO case, device drivers may perform checksum offload correctly even when not advertising it. When switching to software checksum, packets hit skb_checksum_help, which has two BUG_ON checksum not in linear segment. Packet sockets always allocate at least up to csum_start + csum_off + 2 as linear. Tested by running github.com/wdebruij/kerneltools/psock_txring_vnet.c ethtool -K eth0 tso off tx on psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v -N ethtool -K eth0 tx off psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G -N v2: - add EXPORT_SYMBOL_GPL(validate_xmit_skb_list) Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net_sched actions: use nla_parse_nested()Johannes Berg1-2/+1
Use nla_parse_nested instead of open-coding the call to nla_parse() with the attribute data/len. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()Eli Cooper1-0/+1
This patch updates skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit() when an IPv6 header is installed to a socket buffer. This is not a cosmetic change. Without updating this value, GSO packets transmitted through an ipip6 tunnel have the protocol of ETH_P_IP and skb_mac_gso_segment() will attempt to call gso_segment() for IPv4, which results in the packets being dropped. Fixes: b8921ca83eed ("ip4ip6: Support for GSO/GRO") Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29inet: Fix missing return value in inet6_hashCraig Gallek1-2/+4
As part of a series to implement faster SO_REUSEPORT lookups, commit 086c653f5862 ("sock: struct proto hash function may error") added return values to protocol hash functions and commit 496611d7b5ea ("inet: create IPv6-equivalent inet_hash function") implemented a new hash function for IPv6. However, the latter does not respect the former's convention. This properly propagates the hash errors in the IPv6 case. Fixes: 496611d7b5ea ("inet: create IPv6-equivalent inet_hash function") Reported-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29sctp: validate chunk len before actually using itMarcelo Ricardo Leitner1-6/+6
Andrey Konovalov reported that KASAN detected that SCTP was using a slab beyond the boundaries. It was caused because when handling out of the blue packets in function sctp_sf_ootb() it was checking the chunk len only after already processing the first chunk, validating only for the 2nd and subsequent ones. The fix is to just move the check upwards so it's also validated for the 1st chunk. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28sunrpc: fix some missing rq_rbuffer assignmentsJeff Layton2-0/+2
We've been seeing some crashes in testing that look like this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8135ce99>] memcpy_orig+0x29/0x110 PGD 212ca2067 PUD 212ca3067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ppdev parport_pc i2c_piix4 sg parport i2c_core virtio_balloon pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod ata_generic pata_acpi virtio_scsi 8139too ata_piix libata 8139cp mii virtio_pci floppy virtio_ring serio_raw virtio CPU: 1 PID: 1540 Comm: nfsd Not tainted 4.9.0-rc1 #39 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 task: ffff88020d7ed200 task.stack: ffff880211838000 RIP: 0010:[<ffffffff8135ce99>] [<ffffffff8135ce99>] memcpy_orig+0x29/0x110 RSP: 0018:ffff88021183bdd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff88020d7fa000 RCX: 000000f400000000 RDX: 0000000000000014 RSI: ffff880212927020 RDI: 0000000000000000 RBP: ffff88021183be30 R08: 01000000ef896996 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880211704ca8 R13: ffff88021473f000 R14: 00000000ef896996 R15: ffff880211704800 FS: 0000000000000000(0000) GS:ffff88021fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000212ca1000 CR4: 00000000000006e0 Stack: ffffffffa01ea087 ffffffff63400001 ffff880215145e00 ffff880211bacd00 ffff88021473f2b8 0000000000000004 00000000d0679d67 ffff880211bacd00 ffff88020d7fa000 ffff88021473f000 0000000000000000 ffff88020d7faa30 Call Trace: [<ffffffffa01ea087>] ? svc_tcp_recvfrom+0x5a7/0x790 [sunrpc] [<ffffffffa01f84d8>] svc_recv+0xad8/0xbd0 [sunrpc] [<ffffffffa0262d5e>] nfsd+0xde/0x160 [nfsd] [<ffffffffa0262c80>] ? nfsd_destroy+0x60/0x60 [nfsd] [<ffffffff810a9418>] kthread+0xd8/0xf0 [<ffffffff816dbdbf>] ret_from_fork+0x1f/0x40 [<ffffffff810a9340>] ? kthread_park+0x60/0x60 Code: 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe 7c 35 48 83 ea 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c 8b 5e 18 48 8d 76 20 <4c> 89 07 4c 89 4f 08 4c 89 57 10 4c 89 5f 18 48 8d 7f 20 73 d4 RIP [<ffffffff8135ce99>] memcpy_orig+0x29/0x110 RSP <ffff88021183bdd0> CR2: 0000000000000000 Both Bruce and Eryu ran a bisect here and found that the problematic patch was 68778945e46 (SUNRPC: Separate buffer pointers for RPC Call and Reply messages). That patch changed rpc_xdr_encode to use a new rq_rbuffer pointer to set up the receive buffer, but didn't change all of the necessary codepaths to set it properly. In particular the backchannel setup was missing. We need to set rq_rbuffer whenever rq_buffer is set. Ensure that it is. Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Reported-by: Eryu Guan <guaneryu@gmail.com> Tested-by: Eryu Guan <guaneryu@gmail.com> Fixes: 68778945e46 "SUNRPC: Separate buffer pointers..." Reported-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-10-27net sched filters: fix notification of filter delete with proper handleJamal Hadi Salim1-1/+2
Daniel says: While trying out [1][2], I noticed that tc monitor doesn't show the correct handle on delete: $ tc monitor qdisc clsact ffff: dev eno1 parent ffff:fff1 filter dev eno1 ingress protocol all pref 49152 bpf handle 0x2a [...] deleted filter dev eno1 ingress protocol all pref 49152 bpf handle 0xf3be0c80 some context to explain the above: The user identity of any tc filter is represented by a 32-bit identifier encoded in tcm->tcm_handle. Example 0x2a in the bpf filter above. A user wishing to delete, get or even modify a specific filter uses this handle to reference it. Every classifier is free to provide its own semantics for the 32 bit handle. Example: classifiers like u32 use schemes like 800:1:801 to describe the semantics of their filters represented as hash table, bucket and node ids etc. Classifiers also have internal per-filter representation which is different from this externally visible identity. Most classifiers set this internal representation to be a pointer address (which allows fast retrieval of said filters in their implementations). This internal representation is referenced with the "fh" variable in the kernel control code. When a user successfuly deletes a specific filter, by specifying the correct tcm->tcm_handle, an event is generated to user space which indicates which specific filter was deleted. Before this patch, the "fh" value was sent to user space as the identity. As an example what is shown in the sample bpf filter delete event above is 0xf3be0c80. This is infact a 32-bit truncation of 0xffff8807f3be0c80 which happens to be a 64-bit memory address of the internal filter representation (address of the corresponding filter's struct cls_bpf_prog); After this patch the appropriate user identifiable handle as encoded in the originating request tcm->tcm_handle is generated in the event. One of the cardinal rules of netlink rules is to be able to take an event (such as a delete in this case) and reflect it back to the kernel and successfully delete the filter. This patch achieves that. Note, this issue has existed since the original TC action infrastructure code patch back in 2004 as found in: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/commit/ [1] http://patchwork.ozlabs.org/patch/682828/ [2] http://patchwork.ozlabs.org/patch/682829/ Fixes: 4e54c4816bfe ("[NET]: Add tc extensions infrastructure.") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27flow_dissector: fix vlan tag handlingArnd Bergmann1-5/+5
gcc warns about an uninitialized pointer dereference in the vlan priority handling: net/core/flow_dissector.c: In function '__skb_flow_dissect': net/core/flow_dissector.c:281:61: error: 'vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] As pointed out by Jiri Pirko, the variable is never actually used without being initialized first as the only way it end up uninitialized is with skb_vlan_tag_present(skb)==true, and that means it does not get accessed. However, the warning hints at some related issues that I'm addressing here: - the second check for the vlan tag is different from the first one that tests the skb for being NULL first, causing both the warning and a possible NULL pointer dereference that was not entirely fixed. - The same patch that introduced the NULL pointer check dropped an earlier optimization that skipped the repeated check of the protocol type - The local '_vlan' variable is referenced through the 'vlan' pointer but the variable has gone out of scope by the time that it is accessed, causing undefined behavior Caching the result of the 'skb && skb_vlan_tag_present(skb)' check in a local variable allows the compiler to further optimize the later check. With those changes, the warning also disappears. Fixes: 3805a938a6c2 ("flow_dissector: Check skb for VLAN only if skb specified.") Fixes: d5709f7ab776 ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27net: ipv6: Do not consider link state for nexthop validationDavid Ahern1-2/+4
Similar to IPv4, do not consider link state when validating next hops. Currently, if the link is down default routes can fail to insert: $ ip -6 ro add vrf blue default via 2100:2::64 dev eth2 RTNETLINK answers: No route to host With this patch the command succeeds. Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27net: ipv6: Fix processing of RAs in presence of VRFDavid Ahern1-20/+48
rt6_add_route_info and rt6_add_dflt_router were updated to pull the FIB table from the device index, but the corresponding rt6_get_route_info and rt6_get_dflt_router functions were not leading to the failure to process RA's: ICMPv6: RA: ndisc_router_discovery failed to add default route Fix the 'get' functions by using the table id associated with the device when applicable. Also, now that default routes can be added to tables other than the default table, rt6_purge_dflt_routers needs to be updated as well to look at all tables. To handle that efficiently, add a flag to the table denoting if it is has a default route via RA. Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26udp: fix IP_CHECKSUM handlingEric Dumazet3-7/+9
First bug was added in commit ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") : Tom missed that ipv4 udp messages could be received on AF_INET6 socket. ip_cmsg_recv(msg, skb) should have been replaced by ip_cmsg_recv_offset(msg, skb, sizeof(struct udphdr)); Then commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") forgot to adjust the offsets now UDP headers are pulled before skb are put in receive queue. Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sam Kumar <samanthakumar@google.com> Cc: Willem de Bruijn <willemb@google.com> Tested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26sctp: fix the panic caused by route updateXin Long1-1/+7
Commit 7303a1475008 ("sctp: identify chunks that need to be fragmented at IP level") made the chunk be fragmented at IP level in the next round if it's size exceed PMTU. But there still is another case, PMTU can be updated if transport's dst expires and transport's pmtu_pending is set in sctp_packet_transmit. If the new PMTU is less than the chunk, the same issue with that commit can be triggered. So we should drop this packet and let it retransmit in another round where it would be fragmented at IP level. This patch is to fix it by checking the chunk size after PMTU may be updated and dropping this packet if it's size exceed PMTU. Fixes: 90017accff61 ("sctp: Add GSO support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26sunrpc: don't pass on-stack memory to sg_set_bufJ. Bruce Fields3-45/+71
As of ac4e97abce9b "scatterlist: sg_set_buf() argument must be in linear mapping", sg_set_buf hits a BUG when make_checksum_v2->xdr_process_buf, among other callers, passes it memory on the stack. We only need a scatterlist to pass this to the crypto code, and it seems like overkill to require kmalloc'd memory just to encrypt a few bytes, but for now this seems the best fix. Many of these callers are in the NFS write paths, so we allocate with GFP_NOFS. It might be possible to do without allocations here entirely, but that would probably be a bigger project. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-10-26cfg80211: process events caused by suspend before suspendingJohannes Berg1-1/+4
When suspending without WoWLAN, cfg80211 will ask drivers to disconnect. Even when the driver does this synchronously, and immediately returns with a notification, cfg80211 schedules the handling thereof to a workqueue, and may then call back into the driver when the driver was already suspended/ing. Fix this by processing all events caused by cfg80211_leave_all() directly after that function returns. The driver still needs to do the right thing here and wait for the firmware response, but that is - at least - true for mwifiex where this occurred. Reported-by: Amitkumar Karwar <akarwar@marvell.com> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-23Merge branch 'for-upstream' of ↵David S. Miller3-35/+42
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2016-10-21 Here are some more Bluetooth fixes for the 4.9 kernel: - Fix to btwilink driver probe function return value - Power management fix to hci_bcm - Fix to encoding name in scan response data Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23net: sctp, forbid negative lengthJiri Slaby1-1/+4
Most of getsockopt handlers in net/sctp/socket.c check len against sizeof some structure like: if (len < sizeof(int)) return -EINVAL; On the first look, the check seems to be correct. But since len is int and sizeof returns size_t, int gets promoted to unsigned size_t too. So the test returns false for negative lengths. Yes, (-1 < sizeof(long)) is false. Fix this in sctp by explicitly checking len < 0 before any getsockopt handler is called. Note that sctp_getsockopt_events already handled the negative case. Since we added the < 0 check elsewhere, this one can be removed. If not checked, this is the result: UBSAN: Undefined behaviour in ../mm/page_alloc.c:2722:19 shift exponent 52 is too large for 32-bit type 'int' CPU: 1 PID: 24535 Comm: syz-executor Not tainted 4.8.1-0-syzkaller #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88006d99f2a8 ffffffffb2f7bdea 0000000041b58ab3 ffffffffb4363c14 ffffffffb2f7bcde ffff88006d99f2d0 ffff88006d99f270 0000000000000000 0000000000000000 0000000000000034 ffffffffb5096422 Call Trace: [<ffffffffb3051498>] ? __ubsan_handle_shift_out_of_bounds+0x29c/0x300 ... [<ffffffffb273f0e4>] ? kmalloc_order+0x24/0x90 [<ffffffffb27416a4>] ? kmalloc_order_trace+0x24/0x220 [<ffffffffb2819a30>] ? __kmalloc+0x330/0x540 [<ffffffffc18c25f4>] ? sctp_getsockopt_local_addrs+0x174/0xca0 [sctp] [<ffffffffc18d2bcd>] ? sctp_getsockopt+0x10d/0x1b0 [sctp] [<ffffffffb37c1219>] ? sock_common_getsockopt+0xb9/0x150 [<ffffffffb37be2f5>] ? SyS_getsockopt+0x1a5/0x270 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-sctp@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23ipv6: do not increment mac header when it's unsetJason A. Donenfeld1-1/+2
Otherwise we'll overflow the integer. This occurs when layer 3 tunneled packets are handed off to the IPv6 layer. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22ipv4: use the right lock for ping_group_rangeWANG Cong1-4/+4
This reverts commit a681574c99be23e4d20b769bf0e543239c364af5 ("ipv4: disable BH in set_ping_group_range()") because we never read ping_group_range in BH context (unlike local_port_range). Then, since we already have a lock for ping_group_range, those using ip_local_ports.lock for ping_group_range are clearly typos. We might consider to share a same lock for both ping_group_range and local_port_range w.r.t. space saving, but that should be for net-next. Fixes: a681574c99be ("ipv4: disable BH in set_ping_group_range()") Fixes: ba6b918ab234 ("ping: move ping_group_range out of CONFIG_SYSCTL") Cc: Eric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22netns: revert "netns: avoid disabling irq for netns id"Paul Moore1-15/+20
This reverts commit bc51dddf98c9 ("netns: avoid disabling irq for netns id") as it was found to cause problems with systems running SELinux/audit, see the mailing list thread below: * http://marc.info/?t=147694653900002&r=1&w=2 Eventually we should be able to reintroduce this code once we have rewritten the audit multicast code to queue messages much the same way we do for unicast messages. A tracking issue for this can be found below: * https://github.com/linux-audit/audit-kernel/issues/23 Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Reported-by: Elad Raz <e@eladraz.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21ipv6: fix a potential deadlock in do_ipv6_setsockopt()WANG Cong2-6/+14
Baozeng reported this deadlock case: CPU0 CPU1 ---- ---- lock([ 165.136033] sk_lock-AF_INET6); lock([ 165.136033] rtnl_mutex); lock([ 165.136033] sk_lock-AF_INET6); lock([ 165.136033] rtnl_mutex); Similar to commit 87e9f0315952 ("ipv4: fix a potential deadlock in mcast getsockopt() path") this is due to we still have a case, ipv6_sock_mc_close(), where we acquire sk_lock before rtnl_lock. Close this deadlock with the similar solution, that is always acquire rtnl lock first. Fixes: baf606d9c9b1 ("ipv4,ipv6: grab rtnl before locking the socket") Reported-by: Baozeng Ding <sploving1@gmail.com> Tested-by: Baozeng Ding <sploving1@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller13-42/+70
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix compilation warning in xt_hashlimit on m68k 32-bits, from Geert Uytterhoeven. 2) Fix wrong timeout in set elements added from packet path via nft_dynset, from Anders K. Pedersen. 3) Remove obsolete nf_conntrack_events_retry_timeout sysctl documentation, from Nicolas Dichtel. 4) Ensure proper initialization of log flags via xt_LOG, from Liping Zhang. 5) Missing alias to autoload ipcomp, also from Liping Zhang. 6) Missing NFTA_HASH_OFFSET attribute validation, again from Liping. 7) Wrong integer type in the new nft_parse_u32_check() function, from Dan Carpenter. 8) Another wrong integer type declaration in nft_exthdr_init, also from Dan Carpenter. 9) Fix insufficient mode validation in nft_range. 10) Fix compilation warning in nft_range due to possible uninitialized value, from Arnd Bergmann. 11) Zero nf_hook_ops allocated via xt_hook_alloc() in x_tables to calm down kmemcheck, from Florian Westphal. 12) Schedule gc_worker() to run again if GC_MAX_EVICTS quota is reached, from Nicolas Dichtel. 13) Fix nf_queue() after conversion to single-linked hook list, related to incorrect bypass flag handling and incorrect hook point of reinjection. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21batman-adv: fix splat on disabling an interfaceLinus Lüssing1-1/+0
As long as there is still a reference for a hard interface held, there might still be a forwarding packet relying on its attributes. Therefore avoid setting hard_iface->soft_iface to NULL when disabling a hard interface. This fixes the following, potential splat: batman_adv: bat0: Interface deactivated: eth1 batman_adv: bat0: Removing interface: eth1 cgroup: new mount options do not match the existing superblock, will be ignored batman_adv: bat0: Interface deactivated: eth3 batman_adv: bat0: Removing interface: eth3 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1986 at ./net/batman-adv/bat_iv_ogm.c:549 batadv_iv_send_outstanding_bat_ogm_packet+0x145/0x643 [batman_adv] Modules linked in: batman_adv(O-) <...> CPU: 3 PID: 1986 Comm: kworker/u8:2 Tainted: G W O 4.6.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet [batman_adv] 0000000000000000 ffff88001d93bca0 ffffffff8126c26b 0000000000000000 0000000000000000 ffff88001d93bcf0 ffffffff81051615 ffff88001f19f818 000002251d93bd68 0000000000000046 ffff88001dc04a00 ffff88001becbe48 Call Trace: [<ffffffff8126c26b>] dump_stack+0x67/0x90 [<ffffffff81051615>] __warn+0xc7/0xe5 [<ffffffff8105164b>] warn_slowpath_null+0x18/0x1a [<ffffffffa0356f24>] batadv_iv_send_outstanding_bat_ogm_packet+0x145/0x643 [batman_adv] [<ffffffff8108b01f>] ? __lock_is_held+0x32/0x54 [<ffffffff810689a2>] process_one_work+0x2a8/0x4f5 [<ffffffff81068856>] ? process_one_work+0x15c/0x4f5 [<ffffffff81068df2>] worker_thread+0x1d5/0x2c0 [<ffffffff81068c1d>] ? process_scheduled_works+0x2e/0x2e [<ffffffff81068c1d>] ? process_scheduled_works+0x2e/0x2e [<ffffffff8106dd90>] kthread+0xc0/0xc8 [<ffffffff8144de82>] ret_from_fork+0x22/0x40 [<ffffffff8106dcd0>] ? __init_kthread_worker+0x55/0x55 ---[ end trace 647f9f325123dc05 ]--- What happened here is, that there was still a forw_packet (here: a BATMAN IV OGM) in the queue of eth3 with the forw_packet->if_incoming set to eth1 and the forw_packet->if_outgoing set to eth3. When eth3 is to be deactivated and removed, then this thread waits for the forw_packet queued on eth3 to finish. Because eth1 was deactivated and removed earlier and by that had forw_packet->if_incoming->soft_iface, set to NULL, the splat when trying to send/flush the OGM on eth3 occures. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: Reduced size of Oops message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-20ipv4: disable BH in set_ping_group_range()Eric Dumazet1-2/+2
In commit 4ee3bd4a8c746 ("ipv4: disable BH when changing ip local port range") Cong added BH protection in set_local_port_range() but missed that same fix was needed in set_ping_group_range() Fixes: b8f1a55639e6 ("udp: Add function to make source port for UDP tunnels") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Eric Salo <salo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20udp: must lock the socket in udp_disconnect()Eric Dumazet7-8/+17
Baozeng Ding reported KASAN traces showing uses after free in udp_lib_get_port() and other related UDP functions. A CONFIG_DEBUG_PAGEALLOC=y kernel would eventually crash. I could write a reproducer with two threads doing : static int sock_fd; static void *thr1(void *arg) { for (;;) { connect(sock_fd, (const struct sockaddr *)arg, sizeof(struct sockaddr_in)); } } static void *thr2(void *arg) { struct sockaddr_in unspec; for (;;) { memset(&unspec, 0, sizeof(unspec)); connect(sock_fd, (const struct sockaddr *)&unspec, sizeof(unspec)); } } Problem is that udp_disconnect() could run without holding socket lock, and this was causing list corruptions. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca8-8/+9
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ipv6: properly prevent temp_prefered_lft sysctl raceJiri Bohac1-5/+4
The check for an underflow of tmp_prefered_lft is always false because tmp_prefered_lft is unsigned. The intention of the check was to guard against racing with an update of the temp_prefered_lft sysctl, potentially resulting in an underflow. As suggested by David Miller, the best way to prevent the race is by reading the sysctl variable using READ_ONCE. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20netfilter: fix nf_queue handlingPablo Neira Ayuso3-27/+36
nf_queue handling is broken since e3b37f11e6e4 ("netfilter: replace list_head with single linked list") for two reasons: 1) If the bypass flag is set on, there are no userspace listeners and we still have more hook entries to iterate over, then jump to the next hook. Otherwise accept the packet. On nf_reinject() path, the okfn() needs to be invoked. 2) We should not re-enter the same hook on packet reinjection. If the packet is accepted, we have to skip the current hook from where the packet was enqueued, otherwise the packets gets enqueued over and over again. This restores the previous list_for_each_entry_continue() behaviour happening from nf_iterate() that was dealing with these two cases. This patch introduces a new nf_queue() wrapper function so this fix becomes simpler. Fixes: e3b37f11e6e4 ("netfilter: replace list_head with single linked list") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-20netfilter: conntrack: restart gc immediately if GC_MAX_EVICTS is reachedNicolas Dichtel1-1/+1
When the maximum evictions number is reached, do not wait 5 seconds before the next run. CC: Florian Westphal <fw@strlen.de> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-20net/ncsi: Improve HNCDSC AEN handlerGavin Shan1-3/+15
This improves AEN handler for Host Network Controller Driver Status Change (HNCDSC): * The channel's lock should be hold when accessing its state. * Do failover when host driver isn't ready. * Configure channel when host driver becomes ready. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/ncsi: Choose hot channel as active one if necessaryGavin Shan2-3/+20
The issue was found on BCM5718 which has two NCSI channels in one package: C0 and C1. C0 is in link-up state while C1 is in link-down state. C0 is chosen as active channel until unplugging and plugging C0's cable: On unplugging C0's cable, LSC (Link State Change) AEN packet received on C0 to report link-down event. After that, C1 is chosen as active channel. LSC AEN for link-up event is lost on C0 when plugging C0's cable back. We lose the network even C0 is usable. This resolves the issue by recording the (hot) channel that was ever chosen as active one. The hot channel is chosen to be active one if none of available channels in link-up state. With this, C0 is still the active one after unplugging C0's cable. LSC AEN packet received on C0 when plugging its cable back. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/ncsi: Fix stale link state of inactive channels on failoverGavin Shan2-1/+28
The issue was found on BCM5718 which has two NCSI channels in one package: C0 and C1. Both of them are connected to different LANs, means they are in link-up state and C0 is chosen as the active one until resetting BCM5718 happens as below. Resetting BCM5718 results in LSC (Link State Change) AEN packet received on C0, meaning LSC AEN is missed on C1. When LSC AEN packet received on C0 to report link-down, it fails over to C1 because C1 is in link-up state as software can see. However, C1 is in link-down state in hardware. It means the link state is out of synchronization between hardware and software, resulting in inappropriate channel (C1) selected as active one. This resolves the issue by sending separate GLS (Get Link Status) commands to all channels in the package before trying to do failover. The last link states of all channels in the package are retrieved. With it, C0 (not C1) is selected as active one as expected. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/ncsi: Avoid if statements in ncsi_suspend_channel()Gavin Shan1-28/+50
There are several if/else statements in the state machine implemented by switch/case in ncsi_suspend_channel() to avoid duplicated code. It makes the code a bit hard to be understood. This drops if/else statements in ncsi_suspend_channel() to improve the code readability as Joel Stanley suggested. Also, it becomes easy to add more states in the state machine without affecting current code. No logical changes introduced by this. Suggested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/sched: act_mirred: Use passed lastuse argumentPaul Blakey1-1/+4
stats_update callback is called by NIC drivers doing hardware offloading of the mirred action. Lastuse is passed as argument to specify when the stats was actually last updated and is not always the current time. Fixes: 9798e6fe4f9b ('net: act_mirred: allow statistic updates from offloaded actions') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19Bluetooth: Fix append max 11 bytes of name to scan rsp dataMichał Narajowski3-35/+42
Append maximum of 10 + 1 bytes of name to scan response data. Complete name is appended only if exists and is <= 10 characters. Else append short name if exists or shorten complete name if not. This makes sure name is consistent across multiple advertising instances. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-19netfilter: x_tables: suppress kmemcheck warningFlorian Westphal1-1/+1
Markus Trippelsdorf reports: WARNING: kmemcheck: Caught 64-bit read from uninitialized memory (ffff88001e605480) 4055601e0088ffff000000000000000090686d81ffffffff0000000000000000 u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u ^ |RIP: 0010:[<ffffffff8166e561>] [<ffffffff8166e561>] nf_register_net_hook+0x51/0x160 [..] [<ffffffff8166e561>] nf_register_net_hook+0x51/0x160 [<ffffffff8166eaaf>] nf_register_net_hooks+0x3f/0xa0 [<ffffffff816d6715>] ipt_register_table+0xe5/0x110 [..] This warning is harmless; we copy 'uninitialized' data from the hook ops but it will not be used. Long term the structures keeping run-time data should be disentangled from those only containing config-time data (such as where in the list to insert a hook), but thats -next material. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-19Merge branch 'gup_flag-cleanups'Linus Torvalds1-1/+1
Merge the gup_flags cleanups from Lorenzo Stoakes: "This patch series adjusts functions in the get_user_pages* family such that desired FOLL_* flags are passed as an argument rather than implied by flags. The purpose of this change is to make the use of FOLL_FORCE explicit so it is easier to grep for and clearer to callers that this flag is being used. The use of FOLL_FORCE is an issue as it overrides missing VM_READ/VM_WRITE flags for the VMA whose pages we are reading from/writing to, which can result in surprising behaviour. The patch series came out of the discussion around commit 38e088546522 ("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"), which addressed a BUG_ON() being triggered when a page was faulted in with PROT_NONE set but having been overridden by FOLL_FORCE. do_numa_page() was run on the assumption the page _must_ be one marked for NUMA node migration as an actual PROT_NONE page would have been dealt with prior to this code path, however FOLL_FORCE introduced a situation where this assumption did not hold. See https://marc.info/?l=linux-mm&m=147585445805166 for the patch proposal" Additionally, there's a fix for an ancient bug related to FOLL_FORCE and FOLL_WRITE by me. [ This branch was rebased recently to add a few more acked-by's and reviewed-by's ] * gup_flag-cleanups: mm: replace access_process_vm() write parameter with gup_flags mm: replace access_remote_vm() write parameter with gup_flags mm: replace __access_remote_vm() write parameter with gup_flags mm: replace get_user_pages_remote() write/force parameters with gup_flags mm: replace get_user_pages() write/force parameters with gup_flags mm: replace get_vaddr_frames() write/force parameters with gup_flags mm: replace get_user_pages_locked() write/force parameters with gup_flags mm: replace get_user_pages_unlocked() write/force parameters with gup_flags mm: remove write/force parameters from __get_user_pages_unlocked() mm: remove write/force parameters from __get_user_pages_locked() mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
2016-10-19tcp: do not export sysctl_tcp_low_latencyEric Dumazet1-1/+0
Since commit b2fb4f54ecd4 ("tcp: uninline tcp_prequeue()") we no longer access sysctl_tcp_low_latency from a module. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19switchdev: Execute bridge ndos only for bridge portsIdo Schimmel1-0/+9
We recently got the following warning after setting up a vlan device on top of an offloaded bridge and executing 'bridge link': WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [...] CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3 0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b 0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990 Call Trace: [<ffffffff8135eaa3>] dump_stack+0x63/0x90 [<ffffffff8108c43b>] __warn+0xcb/0xf0 [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum] [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0 [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90 [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190 [<ffffffff8161a1b2>] netlink_dump+0x122/0x290 [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220 [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890 [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0 [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30 [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240 [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50 [<ffffffff815c6031>] SYSC_sendto+0x101/0x190 [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90 [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10 [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 The problem is that the 8021q module propagates the call to ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't recognize the netdev, as it's not offloaded. While we can ignore calls being made to non-bridge ports inside the driver, a better fix would be to push this check up to the switchdev layer. Note that these ndos can be called for non-bridged netdev, but this only happens in certain PF drivers which don't call the corresponding switchdev functions anyway. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: core: Correctly iterate over lower adjacency listIdo Schimmel1-3/+7
Tamir reported the following trace when processing ARP requests received via a vlan device on top of a VLAN-aware bridge: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [swapper/1:0] [...] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016 task: ffff88017edfea40 task.stack: ffff88017ee10000 RIP: 0010:[<ffffffff815dcc73>] [<ffffffff815dcc73>] netdev_all_lower_get_next_rcu+0x33/0x60 [...] Call Trace: <IRQ> [<ffffffffa015de0a>] mlxsw_sp_port_lower_dev_hold+0x5a/0xa0 [mlxsw_spectrum] [<ffffffffa016f1b0>] mlxsw_sp_router_netevent_event+0x80/0x150 [mlxsw_spectrum] [<ffffffff810ad07a>] notifier_call_chain+0x4a/0x70 [<ffffffff810ad13a>] atomic_notifier_call_chain+0x1a/0x20 [<ffffffff815ee77b>] call_netevent_notifiers+0x1b/0x20 [<ffffffff815f2eb6>] neigh_update+0x306/0x740 [<ffffffff815f38ce>] neigh_event_ns+0x4e/0xb0 [<ffffffff8165ea3f>] arp_process+0x66f/0x700 [<ffffffff8170214c>] ? common_interrupt+0x8c/0x8c [<ffffffff8165ec29>] arp_rcv+0x139/0x1d0 [<ffffffff816e505a>] ? vlan_do_receive+0xda/0x320 [<ffffffff815e3794>] __netif_receive_skb_core+0x524/0xab0 [<ffffffff815e6830>] ? dev_queue_xmit+0x10/0x20 [<ffffffffa06d612d>] ? br_forward_finish+0x3d/0xc0 [bridge] [<ffffffffa06e5796>] ? br_handle_vlan+0xf6/0x1b0 [bridge] [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60 [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0 [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70 [<ffffffffa06d7856>] br_pass_frame_up+0xc6/0x160 [bridge] [<ffffffffa06d63d7>] ? deliver_clone+0x37/0x50 [bridge] [<ffffffffa06d656c>] ? br_flood+0xcc/0x160 [bridge] [<ffffffffa06d7b14>] br_handle_frame_finish+0x224/0x4f0 [bridge] [<ffffffffa06d7f94>] br_handle_frame+0x174/0x300 [bridge] [<ffffffff815e3599>] __netif_receive_skb_core+0x329/0xab0 [<ffffffff81374815>] ? find_next_bit+0x15/0x20 [<ffffffff8135e802>] ? cpumask_next_and+0x32/0x50 [<ffffffff810c9968>] ? load_balance+0x178/0x9b0 [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60 [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0 [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70 [<ffffffffa01544a1>] mlxsw_sp_rx_listener_func+0x61/0xb0 [mlxsw_spectrum] [<ffffffffa005c9f7>] mlxsw_core_skb_receive+0x187/0x200 [mlxsw_core] [<ffffffffa007332a>] mlxsw_pci_cq_tasklet+0x63a/0x9b0 [mlxsw_pci] [<ffffffff81091986>] tasklet_action+0xf6/0x110 [<ffffffff81704556>] __do_softirq+0xf6/0x280 [<ffffffff8109213f>] irq_exit+0xdf/0xf0 [<ffffffff817042b4>] do_IRQ+0x54/0xd0 [<ffffffff8170214c>] common_interrupt+0x8c/0x8c The problem is that netdev_all_lower_get_next_rcu() never advances the iterator, thereby causing the loop over the lower adjacency list to run forever. Fix this by advancing the iterator and avoid the infinite loop. Fixes: 7ce856aaaf13 ("mlxsw: spectrum: Add couple of lower device helper functions") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19flow_dissector: Check skb for VLAN only if skb specified.Eric Garver1-4/+2
Fixes a panic when calling eth_get_headlen(). Noticed on i40e driver. Fixes: d5709f7ab776 ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci") Signed-off-by: Eric Garver <e@erig.me> Reviewed-by: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18mm: replace get_user_pages_unlocked() write/force parameters with gup_flagsLorenzo Stoakes1-1/+1
This removes the 'write' and 'force' use from get_user_pages_unlocked() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18soreuseport: do not export reuseport_add_sock()Eric Dumazet1-1/+0
reuseport_add_sock() is not used from a module, no need to export it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18bridge: multicast: restore perm router ports on multicast enableNikolay Aleksandrov1-9/+14
Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>