summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds38-90/+237
Pull networking fixes from David Miller: 1) Fix SKB leak in 8139cp, from Dave Jones. 2) Fix use of *_PAGES interfaces with mlx5 firmware, from Moshe Lazar. 3) RCU conversion of macvtap introduced two races, fixes by Eric Dumazet 4) Synchronize statistic flows in bnx2x driver to prevent corruption, from Dmitry Kravkov 5) Undo optimization in IP tunneling, we were using the inner IP header in some cases to inherit the IP ID, but that isn't correct in some circumstances. From Pravin B Shelar 6) Use correct struct size when parsing netlink attributes in rtnl_bridge_getlink(). From Asbjoern Sloth Toennesen 7) Length verifications in tun_get_user() are bogus, from Weiping Pan and Dan Carpenter 8) Fix bad merge resolution during 3.11 networking development in openvswitch, albeit a harmless one which added some unreachable code. From Jesse Gross 9) Wrong size used in flexible array allocation in openvswitch, from Pravin B Shelar 10) Clear out firmware capability flags the be2net driver isn't ready to handle yet, from Sarveshwar Bandi 11) Revert DMA mapping error checking addition to cxgb3 driver, it's buggy. From Alexey Kardashevskiy 12) Fix regression in packet scheduler rate limiting when working with a link layer of ATM. From Jesper Dangaard Brouer 13) Fix several errors in TCP Cubic congestion control, in particular overflow errors in timestamp calculations. From Eric Dumazet and Van Jacobson 14) In ipv6 routing lookups, we need to backtrack if subtree traversal don't result in a match. From Hannes Frederic Sowa 15) ipgre_header() returns incorrect packet offset. Fix from Timo Teräs 16) Get "low latency" out of the new MIB counter names. From Eliezer Tamir 17) State check in ndo_dflt_fdb_del() is inverted, from Sridhar Samudrala 18) Handle TCP Fast Open properly in netfilter conntrack, from Yuchung Cheng 19) Wrong memcpy length in pcan_usb driver, from Stephane Grosjean 20) Fix dealock in TIPC, from Wang Weidong and Ding Tianhong 21) call_rcu() call to destroy SCTP transport is done too early and might result in an oops. From Daniel Borkmann 22) Fix races in genetlink family dumps, from Johannes Berg 23) Flags passed into macvlan by the user need to be validated properly, from Michael S Tsirkin 24) Fix skge build on 32-bit, from Stephen Hemminger 25) Handle malformed TCP headers properly in xt_TCPMSS, from Pablo Neira Ayuso 26) Fix handling of stacked vlans in vlan_dev_real_dev(), from Nikolay Aleksandrov 27) Eliminate MTU calculation overflows in esp{4,6}, from Daniel Borkmann 28) neigh_parms need to be setup before calling the ->ndo_neigh_setup() method. From Veaceslav Falico 29) Kill out-of-bounds prefetch in fib_trie, from Eric Dumazet 30) Don't dereference MLD query message if the length isn't value in the bridge multicast code, from Linus Lüssing 31) Fix VXLAN IGMP join regression due to an inverted check, from Cong Wang * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits) net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes tun: signedness bug in tun_get_user() qlcnic: Fix diagnostic interrupt test for 83xx adapters qlcnic: Fix beacon state return status handling qlcnic: Fix set driver version command net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset net_sched: restore "linklayer atm" handling drivers/net/ethernet/via/via-velocity.c: update napi implementation Revert "cxgb3: Check and handle the dma mapping errors" be2net: Clear any capability flags that driver is not interested in. openvswitch: Reset tunnel key between input and output. openvswitch: Use correct type while allocating flex array. openvswitch: Fix bad merge resolution. tun: compare with 0 instead of total_len rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header ethernet/arc/arc_emac - fix NAPI "work > weight" warning ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id. bnx2x: prevent crash in shutdown flow with CNIC bnx2x: fix PTE write access error bnx2x: fix memory leak in VF ...
2013-08-15net_sched: restore "linklayer atm" handlingJesper Dangaard Brouer3-0/+55
commit 56b765b79 ("htb: improved accuracy at high rates") broke the "linklayer atm" handling. tc class add ... htb rate X ceil Y linklayer atm The linklayer setting is implemented by modifying the rate table which is send to the kernel. No direct parameter were transferred to the kernel indicating the linklayer setting. The commit 56b765b79 ("htb: improved accuracy at high rates") removed the use of the rate table system. To keep compatible with older iproute2 utils, this patch detects the linklayer by parsing the rate table. It also supports future versions of iproute2 to send this linklayer parameter to the kernel directly. This is done by using the __reserved field in struct tc_ratespec, to convey the choosen linklayer option, but only using the lower 4 bits of this field. Linklayer detection is limited to speeds below 100Mbit/s, because at high rates the rtab is gets too inaccurate, so bad that several fields contain the same values, this resembling the ATM detect. Fields even start to contain "0" time to send, e.g. at 1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have been more broken than we first realized. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15Merge branch 'fixes' of ↵David S. Miller3-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== Three bug fixes that are fairly small either way but resolve obviously incorrect code. For net/3.11. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-14openvswitch: Reset tunnel key between input and output.Jesse Gross1-0/+1
It doesn't make sense to output a tunnel packet using the same parameters that it was received with since that will generally just result in the packet going back to us. As a result, userspace assumes that the tunnel key is cleared when transitioning through the switch. In the majority of cases this doesn't matter since a packet is either going to a tunnel port (in which the key is overwritten with new values) or to a non-tunnel port (in which case the key is ignored). However, it's theoreticaly possible that userspace could rely on the documented behavior, so this corrects it. Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-14openvswitch: Use correct type while allocating flex array.Pravin B Shelar1-1/+1
Flex array is used to allocate hash buckets which is type struct hlist_head, but we use `struct hlist_head *` to calculate array size. Since hlist_head is of size pointer it works fine. Following patch use correct type. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-14openvswitch: Fix bad merge resolution.Jesse Gross1-3/+0
git silently included an extra hunk in vport_cmd_set() during automatic merging. This code is unreachable so it does not actually introduce a problem but it is clearly incorrect. Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-13rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg headerAsbjoern Sloth Toennesen1-1/+1
Fix the iproute2 command `bridge vlan show`, after switching from rtgenmsg to ifinfomsg. Let's start with a little history: Feb 20: Vlad Yasevich got his VLAN-aware bridge patchset included in the 3.9 merge window. In the kernel commit 6cbdceeb, he added attribute support to bridge GETLINK requests sent with rtgenmsg. Mar 6th: Vlad got this iproute2 reference implementation of the bridge vlan netlink interface accepted (iproute2 9eff0e5c) Apr 25th: iproute2 switched from using rtgenmsg to ifinfomsg (63338dca) http://patchwork.ozlabs.org/patch/239602/ http://marc.info/?t=136680900700007 Apr 28th: Linus released 3.9 Apr 30th: Stephen released iproute2 3.9.0 The `bridge vlan show` command haven't been working since the switch to ifinfomsg, or in a released version of iproute2. Since the kernel side only supports rtgenmsg, which iproute2 switched away from just prior to the iproute2 3.9.0 release. I haven't been able to find any documentation, about neither rtgenmsg nor ifinfomsg, and in which situation to use which, but kernel commit 88c5b5ce seams to suggest that ifinfomsg should be used. Fixing this in kernel will break compatibility, but I doubt that anybody have been using it due to this bug in the user space reference implementation, at least not without noticing this bug. That said the functionality is still fully functional in 3.9, when reversing iproute2 commit 63338dca. This could also be fixed in iproute2, but thats an ugly patch that would reintroduce rtgenmsg in iproute2, and from searching in netdev it seams like rtgenmsg usage is discouraged. I'm assuming that the only reason that Vlad implemented the kernel side to use rtgenmsg, was because iproute2 was using it at the time. Signed-off-by: Asbjoern Sloth Toennesen <ast@fiberby.net> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.Pravin B Shelar1-3/+1
Using inner-id for tunnel id is not safe in some rare cases. E.g. packets coming from multiple sources entering same tunnel can have same id. Therefore on tunnel packet receive we could have packets from two different stream but with same source and dst IP with same ip-id which could confuse ip packet reassembly. Following patch reverts optimization from commit 490ab08127 (IP_GRE: Fix IP-Identification.) CC: Jarno Rajahalme <jrajahalme@nicira.com> CC: Ansis Atteka <aatteka@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13genetlink: fix family dump raceJohannes Berg1-0/+7
When dumping generic netlink families, only the first dump call is locked with genl_lock(), which protects the list of families, and thus subsequent calls can access the data without locking, racing against family addition/removal. This can cause a crash. Fix it - the locking needs to be conditional because the first time around it's already locked. A similar bug was reported to me on an old kernel (3.4.47) but the exact scenario that happened there is no longer possible, on those kernels the first round wasn't locked either. Looking at the current code I found the race described above, which had also existed on the old kernel. Cc: stable@vger.kernel.org Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12net: sctp: sctp_transport_destroy{, _rcu}: fix potential pointer corruptionDaniel Borkmann1-2/+2
Probably this one is quite unlikely to be triggered, but it's more safe to do the call_rcu() at the end after we have dropped the reference on the asoc and freed sctp packet chunks. The reason why is because in sctp_transport_destroy_rcu() the transport is being kfree()'d, and if we're unlucky enough we could run into corrupted pointers. Probably that's more of theoretical nature, but it's safer to have this simple fix. Introduced by commit 8c98653f ("sctp: sctp_close: fix release of bindings for deferred call_rcu's"). I also did the 8c98653f regression test and it's fine that way. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12net: sctp: sctp_assoc_control_transport: fix MTU size in SCTP_PF stateDaniel Borkmann1-2/+2
The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd should be 1 MTU. So, instead of 1, set it to 1 MTU. [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 Reported-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-11tipc: avoid possible deadlock while enable and disable bearerdingtianhong1-2/+7
We met lockdep warning when enable and disable the bearer for commands such as: tipc-config -netid=1234 -addr=1.1.3 -be=eth:eth0 tipc-config -netid=1234 -addr=1.1.3 -bd=eth:eth0 --------------------------------------------------- [ 327.693595] ====================================================== [ 327.693994] [ INFO: possible circular locking dependency detected ] [ 327.694519] 3.11.0-rc3-wwd-default #4 Tainted: G O [ 327.694882] ------------------------------------------------------- [ 327.695385] tipc-config/5825 is trying to acquire lock: [ 327.695754] (((timer))#2){+.-...}, at: [<ffffffff8105be80>] del_timer_sync+0x0/0xd0 [ 327.696018] [ 327.696018] but task is already holding lock: [ 327.696018] (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+ 0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] which lock already depends on the new lock. [ 327.696018] [ 327.696018] [ 327.696018] the existing dependency chain (in reverse order) is: [ 327.696018] [ 327.696018] -> #1 (&(&b_ptr->lock)->rlock){+.-...}: [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff814d65b1>] _raw_spin_lock_bh+0x41/0x80 [ 327.696018] [<ffffffffa02c5d48>] disc_timeout+0x18/0xd0 [tipc] [ 327.696018] [<ffffffff8105b92a>] call_timer_fn+0xda/0x1e0 [ 327.696018] [<ffffffff8105bcd7>] run_timer_softirq+0x2a7/0x2d0 [ 327.696018] [<ffffffff8105379a>] __do_softirq+0x16a/0x2e0 [ 327.696018] [<ffffffff81053a35>] irq_exit+0xd5/0xe0 [ 327.696018] [<ffffffff81033005>] smp_apic_timer_interrupt+0x45/0x60 [ 327.696018] [<ffffffff814df4af>] apic_timer_interrupt+0x6f/0x80 [ 327.696018] [<ffffffff8100b70e>] arch_cpu_idle+0x1e/0x30 [ 327.696018] [<ffffffff810a039d>] cpu_idle_loop+0x1fd/0x280 [ 327.696018] [<ffffffff810a043e>] cpu_startup_entry+0x1e/0x20 [ 327.696018] [<ffffffff81031589>] start_secondary+0x89/0x90 [ 327.696018] [ 327.696018] -> #0 (((timer))#2){+.-...}: [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b [ 327.696018] [ 327.696018] other info that might help us debug this: [ 327.696018] [ 327.696018] Possible unsafe locking scenario: [ 327.696018] [ 327.696018] CPU0 CPU1 [ 327.696018] ---- ---- [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] [ 327.696018] *** DEADLOCK *** [ 327.696018] [ 327.696018] 5 locks held by tipc-config/5825: [ 327.696018] #0: (cb_lock){++++++}, at: [<ffffffff8143e608>] genl_rcv+0x18/0x40 [ 327.696018] #1: (genl_mutex){+.+.+.}, at: [<ffffffff8143ed66>] genl_rcv_msg+0xa6/0xd0 [ 327.696018] #2: (config_mutex){+.+.+.}, at: [<ffffffffa02bf889>] tipc_cfg_do_cmd+0x39/ 0x550 [tipc] [ 327.696018] #3: (tipc_net_lock){++.-..}, at: [<ffffffffa02be738>] tipc_disable_bearer+ 0x18/0x60 [tipc] [ 327.696018] #4: (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] stack backtrace: [ 327.696018] CPU: 2 PID: 5825 Comm: tipc-config Tainted: G O 3.11.0-rc3-wwd- default #4 [ 327.696018] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 327.696018] 00000000ffffffff ffff880037fa77a8 ffffffff814d03dd 0000000000000000 [ 327.696018] ffff880037fa7808 ffff880037fa77e8 ffffffff810b1c4f 0000000037fa77e8 [ 327.696018] ffff880037fa7808 ffff880037e4db40 0000000000000000 ffff880037e4e318 [ 327.696018] Call Trace: [ 327.696018] [<ffffffff814d03dd>] dump_stack+0x4d/0xa0 [ 327.696018] [<ffffffff810b1c4f>] print_circular_bug+0x10f/0x120 [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff81087a28>] ? sched_clock_cpu+0xd8/0x110 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffff81218783>] ? security_capable+0x13/0x20 [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143ecc0>] ? genl_lock+0x20/0x20 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e608>] ? genl_rcv+0x18/0x40 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff81289d7c>] ? memcpy_fromiovec+0x6c/0x90 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff813fe29c>] ? release_sock+0x8c/0xa0 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fa24>] ? rw_verify_area+0x54/0x100 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b ----------------------------------------------------------------------- The problem is that the tipc_link_delete() will cancel the timer disc_timeout() when the b_ptr->lock is hold, but the disc_timeout() still call b_ptr->lock to finish the work, so the dead lock occurs. We should unlock the b_ptr->lock when del the disc_timeout(). Remove link_timeout() still met the same problem, the patch: http://article.gmane.org/gmane.network.tipc.general/4380 fix the problem, so no need to send patch for fix link_timeout() deadlock warming. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller5-7/+33
Included change: - reassign pointers to data after skb reallocation to avoid kernel paging errors Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10batman-adv: fix potential kernel paging errors for unicast transmissionsLinus Lüssing5-7/+33
There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-10Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller5-22/+39
Pablo Neira Ayuso says: ==================== The following patchset contains four netfilter fixes, they are: * Fix possible invalid access and mangling of the TCPMSS option in xt_TCPMSS. This was spotted by Julian Anastasov. * Fix possible off by one access and mangling of the TCP packet in xt_TCPOPTSTRIP, also spotted by Julian Anastasov. * Fix possible information leak due to missing initialization of one padding field of several structures that are included in nfqueue and nflog netlink messages, from Dan Carpenter. * Fix TCP window tracking with Fast Open, from Yuchung Cheng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10netfilter: nf_conntrack: fix tcp_in_window for Fast OpenYuchung Cheng1-4/+8
Currently the conntrack checks if the ending sequence of a packet falls within the observed receive window. However it does so even if it has not observe any packet from the remote yet and uses an uninitialized receive window (td_maxwin). If a connection uses Fast Open to send a SYN-data packet which is dropped afterward in the network. The subsequent SYNs retransmits will all fail this check and be discarded, leading to a connection timeout. This is because the SYN retransmit does not contain data payload so end == initial sequence number (isn) + 1 sender->td_end == isn + syn_data_len receiver->td_maxwin == 0 The fix is to only apply this check after td_maxwin is initialized. Reported-by: Michael Chan <mcfchan@stanford.edu> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-10rtnetlink: Fix inverted check in ndo_dflt_fdb_del()Sridhar Samudrala1-1/+1
Fix inverted check when deleting an fdb entry. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: rename busy poll MIB counterEliezer Tamir1-1/+1
Rename mib counter from "low latency" to "busy poll" v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer) Eric Dumazet suggested that the current location is better. So v2 just renames the counter to fit the new naming convention. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: flow_dissector: add 802.1ad supportEric Dumazet1-0/+1
Same behavior than 802.1q : finds the encapsulated protocol and skip 32bit header. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09ip_gre: fix ipgre_header to return correct offsetTimo Teräs1-1/+1
Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-08Merge branch 'master' of ↵John W. Linville3-20/+41
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-08-07ipv6: don't stop backtracking in fib6_lookup_1 if subtree does not matchHannes Frederic Sowa1-4/+12
In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by: Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07SUNRPC: If the rpcbind channel is disconnected, fail the call to unregisterTrond Myklebust3-13/+32
If rpcbind causes our connection to the AF_LOCAL socket to close after we've registered a service, then we want to be careful about reconnecting since the mount namespace may have changed. By simply refusing to reconnect the AF_LOCAL socket in the case of unregister, we avoid the need to somehow save the mount namespace. While this may lead to some services not unregistering properly, it should be safe. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Nix <nix@esperi.org.uk> Cc: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # 3.9.x
2013-08-07tcp: cubic: fix bug in bictcp_acked()Eric Dumazet1-1/+1
While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bridge: correct the comment for file br_sysfs_br.cWang Sheng-Hui1-1/+1
br_sysfs_if.c is for sysfs attributes of bridge ports, while br_sysfs_br.c is for sysfs attributes of bridge itself. Correct the comment here. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07tcp: cubic: fix overflow error in bictcp_update()Eric Dumazet1-4/+6
commit 17a6e9f1aa9 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05SUNRPC: Don't auto-disconnect from the local rpcbind socketTrond Myklebust1-0/+8
There is no need for the kernel to time out the AF_LOCAL connection to the rpcbind socket, and doing so is problematic because when it is time to reconnect, our process may no longer be using the same mount namespace. Reported-by: Nix <nix@esperi.org.uk> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # 3.9.x
2013-08-05bridge: don't try to update timers in case of broken MLD queriesLinus Lüssing1-1/+1
Currently we are reading an uninitialized value for the max_delay variable when snooping an MLD query message of invalid length and would update our timers with that. Fixing this by simply ignoring such broken MLD queries (just like we do for IGMP already). This is a regression introduced by: "bridge: disable snooping if there is no querier" (b00589af3b04) Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05fib_trie: remove potential out of bound accessEric Dumazet1-4/+1
AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb008572b ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05neighbour: populate neigh_parms on alloc before calling ndo_neigh_setupVeaceslav Falico1-4/+6
dev->ndo_neigh_setup() might need some of the values of neigh_parms, so populate them before calling it. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05net: esp{4,6}: fix potential MTU calculation overflowsDaniel Borkmann2-2/+2
Commit 91657eafb ("xfrm: take net hdr len into account for esp payload size calculation") introduced a possible interger overflow in esp{4,6}_get_mtu() handlers in case of x->props.mode equals XFRM_MODE_TUNNEL. Thus, the following expression will overflow unsigned int net_adj; ... <case ipv{4,6} XFRM_MODE_TUNNEL> net_adj = 0; ... return ((mtu - x->props.header_len - crypto_aead_authsize(esp->aead) - net_adj) & ~(align - 1)) + (net_adj - 2); where (net_adj - 2) would be evaluated as <foo> + (0 - 2) in an unsigned context. Fix it by simply removing brackets as those operations here do not need to have special precedence. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Benjamin Poirier <bpoirier@suse.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05net_sched: make dev_trans_start return vlan's real dev trans_startnikolay@redhat.com1-1/+6
Vlan devices are LLTX and don't update their own trans_start, so if dev_trans_start has to be called with a vlan device then 0 or a stale value will be returned. Currently the bonding is the only such user, and it's needed for proper arp monitoring when the slaves are vlans. Fix this by extracting the vlan's real device trans_start. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05vlan: make vlan_dev_real_dev work over stacked vlansnikolay@redhat.com1-1/+6
Sometimes we might have stacked vlans on top of each other, and we're interested in the first non-vlan real device on the path, so transform vlan_dev_real_dev to go over the stacked vlans and extract the first non-vlan device. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05net/vmw_vsock/af_vsock.c: drop unneeded semicolonJulia Lawall1-1/+1
Drop the semicolon at the end of the list_for_each_entry loop header. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05netfilter: nfnetlink_{log,queue}: fix information leaks in netlink messageDan Carpenter2-2/+9
These structs have a "_pad" member. Also the "phw" structs have an 8 byte "hw_addr[]" array but sometimes only the first 6 bytes are initialized. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds32-257/+299
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ...
2013-08-03Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linuxLinus Torvalds4-8/+10
Pull nfsd bugfixes from Bruce Fields: "Most of this is due to a screwup on my part -- some gss-proxy crashes got fixed before the merge window but somehow never made it out of a temporary git repo on my laptop...." * 'for-3.11' of git://linux-nfs.org/~bfields/linux: svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall svcrpc: fix kfree oops in gss-proxy code svcrpc: fix gss-proxy xdr decoding oops svcrpc: fix gss_rpc_upcall create error NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure.
2013-08-02netlabel: use domain based selectors when address based selectors are not ↵Paul Moore6-158/+130
available NetLabel has the ability to selectively assign network security labels to outbound traffic based on either the LSM's "domain" (different for each LSM), the network destination, or a combination of both. Depending on the type of traffic, local or forwarded, and the type of traffic selector, domain or address based, different hooks are used to label the traffic; the goal being minimal overhead. Unfortunately, there is a bug such that a system using NetLabel domain based traffic selectors does not correctly label outbound local traffic that is not assigned to a socket. The issue is that in these cases the associated NetLabel hook only looks at the address based selectors and not the domain based selectors. This patch corrects this by checking both the domain and address based selectors so that the correct labeling is applied, regardless of the configuration type. In order to acomplish this fix, this patch also simplifies some of the NetLabel domainhash structures to use a more common outbound traffic mapping type: struct netlbl_dommap_def. This simplifies some of the code in this patch and paves the way for further simplifications in the future. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02net: check net.core.somaxconn sysctl valuesRoman Gushchin1-1/+5
It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Reported-by: Changli Gao <xiaosuo@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing failsDaniel Borkmann1-1/+3
Commit 5c766d642 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02htb: fix sign extension bugstephen hemminger1-1/+1
When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge branch 'for-john' of ↵John W. Linville3-20/+41
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-08-01tipc: fix oops when creating server socket failsYing Xue1-3/+12
When creation of TIPC internal server socket fails, we get an oops with the following dump: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa0011f49>] tipc_close_conn+0x59/0xb0 [tipc] PGD 13719067 PUD 12008067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: tipc(+) CPU: 4 PID: 4340 Comm: insmod Not tainted 3.10.0+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880014360000 ti: ffff88001374c000 task.ti: ffff88001374c000 RIP: 0010:[<ffffffffa0011f49>] [<ffffffffa0011f49>] tipc_close_conn+0x59/0xb0 [tipc] RSP: 0018:ffff88001374dc98 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff880012ac09d8 RCX: 0000000000000000 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffff880014360000 RBP: ffff88001374dcb8 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0016fa0 R13: ffffffffa0017010 R14: ffffffffa0017010 R15: ffff880012ac09d8 FS: 0000000000000000(0000) GS:ffff880016600000(0063) knlGS:00000000f76668d0 CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000012227000 CR4: 00000000000006e0 Stack: ffff88001374dcb8 ffffffffa0016fa0 0000000000000000 0000000000000001 ffff88001374dcf8 ffffffffa0012922 ffff88001374dce8 00000000ffffffea ffffffffa0017100 0000000000000000 ffff8800134241a8 ffffffffa0017150 Call Trace: [<ffffffffa0012922>] tipc_server_stop+0xa2/0x1b0 [tipc] [<ffffffffa0009995>] tipc_subscr_stop+0x15/0x20 [tipc] [<ffffffffa00130f5>] tipc_core_stop+0x1d/0x33 [tipc] [<ffffffffa001f0d4>] tipc_init+0xd4/0xf8 [tipc] [<ffffffffa001f000>] ? 0xffffffffa001efff [<ffffffff8100023f>] do_one_initcall+0x3f/0x150 [<ffffffff81082f4d>] ? __blocking_notifier_call_chain+0x7d/0xd0 [<ffffffff810cc58a>] load_module+0x11aa/0x19c0 [<ffffffff810c8d60>] ? show_initstate+0x50/0x50 [<ffffffff8190311c>] ? retint_restore_args+0xe/0xe [<ffffffff810cce79>] SyS_init_module+0xd9/0x110 [<ffffffff8190dc65>] sysenter_dispatch+0x7/0x1f Code: 6c 24 70 4c 89 ef e8 b7 04 8f e1 8b 73 04 4c 89 e7 e8 7c 9e 32 e1 41 83 ac 24 b8 00 00 00 01 4c 89 ef e8 eb 0a 8f e1 48 8b 43 08 <4c> 8b 68 20 4d 8d a5 48 03 00 00 4c 89 e7 e8 04 05 8f e1 4c 89 RIP [<ffffffffa0011f49>] tipc_close_conn+0x59/0xb0 [tipc] RSP <ffff88001374dc98> CR2: 0000000000000020 ---[ end trace b02321f40e4269a3 ]--- We have the following call chain: tipc_core_start() ret = tipc_subscr_start() ret = tipc_server_start(){ server->enabled = 1; ret = tipc_open_listening_sock() } I.e., the server->enabled flag is unconditionally set to 1, whatever the return value of tipc_open_listening_sock(). This causes a crash when tipc_core_start() tries to clean up resources after a failed initialization: if (ret == failed) tipc_subscr_stop() tipc_server_stop(){ if (server->enabled) tipc_close_conn(){ NULL reference of con->sock-sk OOPS! } } To avoid this, tipc_server_start() should only set server->enabled to 1 in case of a succesful socket creation. In case of failure, it should release all allocated resources before returning. Problem introduced in commit c5fa7b3cf3cb22e4ac60485fc2dc187fe012910f ("tipc: introduce new TIPC server infrastructure") in v3.11-rc1. Note that it won't be seen often; it takes a module load under memory constrained conditions in order to trigger the failure condition. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLLCong Wang5-7/+7
Eliezer renames several *ll_poll to *busy_poll, but forgets CONFIG_NET_LL_RX_POLL, so in case of confusion, rename it too. Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01ipv6: prevent race between address creation and removalJiri Benc1-16/+15
There's a race in IPv6 automatic addess assignment. The address is created with zero lifetime when it's added to various address lists. Before it gets assigned the correct lifetime, there's a window where a new address may be configured. This causes the semi-initiated address to be deleted in addrconf_verify. This was discovered as a reference leak caused by concurrent run of __ipv6_ifa_notify for both RTM_NEWADDR and RTM_DELADDR with the same address. Fix this by setting the lifetime before the address is added to inet6_addr_lst. A few notes: 1. In addrconf_prefix_rcv, by setting update_lft to zero, the if (update_lft) { ... } condition is no longer executed for newly created addresses. This is okay, as the ifp fields are set in ipv6_add_addr now and ipv6_ifa_notify is called (and has been called) through addrconf_dad_start. 2. The removal of the whole block under ifp->lock in inet6_addr_add is okay, too, as tstamp is initialized to jiffies in ipv6_add_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01ipv6: move peer_addr init into ipv6_add_addr()Jiri Pirko1-9/+11
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01ipv6: update ip6_rt_last_gc every time GC is runMichal Kubeček2-4/+6
As pointed out by Eric Dumazet, net->ipv6.ip6_rt_last_gc should hold the last time garbage collector was run so that we should update it whenever fib6_run_gc() calls fib6_clean_all(), not only if we got there from ip6_dst_gc(). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01ipv6: prevent fib6_run_gc() contentionMichal Kubeček3-15/+12
On a high-traffic router with many processors and many IPv6 dst entries, soft lockup in fib6_run_gc() can occur when number of entries reaches gc_thresh. This happens because fib6_run_gc() uses fib6_gc_lock to allow only one thread to run the garbage collector but ip6_dst_gc() doesn't update net->ipv6.ip6_rt_last_gc until fib6_run_gc() returns. On a system with many entries, this can take some time so that in the meantime, other threads pass the tests in ip6_dst_gc() (ip6_rt_last_gc is still not updated) and wait for the lock. They then have to run the garbage collector one after another which blocks them for quite long. Resolve this by replacing special value ~0UL of expire parameter to fib6_run_gc() by explicit "force" parameter to choose between spin_lock_bh() and spin_trylock_bh() and call fib6_run_gc() with force=false if gc_thresh is reached but not max_size. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01Merge branch 'master' of ↵John W. Linville9-35/+54
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-08-01svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcallJ. Bruce Fields1-1/+1
The change made to rsc_parse() in 0dc1531aca7fd1440918bd55844a054e9c29acad "svcrpc: store gss mech in svc_cred" should also have been propagated to the gss-proxy codepath. This fixes a crash in the gss-proxy case. Signed-off-by: J. Bruce Fields <bfields@redhat.com>