summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2014-04-04libceph: add support for osd primary affinityIlya Dryomov1-0/+68
Respond to non-default primary_affinity values accordingly. (Primary affinity allows the admin to shift 'primary responsibility' away from specific osds, effectively shifting around the read side of the workload and whatever overhead is incurred by peering and writes by virtue of being the primary). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: add support for primary_temp mappingsIlya Dryomov1-1/+6
Change apply_temp() to override primary in the same way pg_temp overrides osd set. primary_temp overrides pg_temp primary too. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: return primary from ceph_calc_pg_acting()Ilya Dryomov2-14/+16
In preparation for adding support for primary_temp, stop assuming primaryness: add a primary out parameter to ceph_calc_pg_acting() and change call sites accordingly. Primary is now specified separately from the order of osds in the set. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: switch ceph_calc_pg_acting() to new helpersIlya Dryomov1-13/+38
Switch ceph_calc_pg_acting() to new helpers: pg_to_raw_osds(), raw_to_up_osds() and apply_temps(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: introduce apply_temps() helperIlya Dryomov1-0/+52
apply_temp() helper for applying various temporary mappings (at this point only pg_temp mappings) to the up set, therefore transforming it into an acting set. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: introduce pg_to_raw_osds() and raw_to_up_osds() helpersIlya Dryomov1-0/+76
pg_to_raw_osds() helper for computing a raw (crush) set, which can contain non-existant and down osds. raw_to_up_osds() helper for pruning non-existant and down osds from the raw set, therefore transforming it into an up set, and determining up primary. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: primary_affinity decode bitsIlya Dryomov1-0/+72
Add two helpers to decode primary_affinity (full map, vector<u32>) and new_primary_affinity (inc map, map<u32, u32>) and switch to them. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: primary_affinity infrastructureIlya Dryomov2-2/+50
Add primary_affinity infrastructure. primary_affinity values are stored in an max_osd-sized array, hanging off ceph_osdmap, similar to a osd_weight array. Introduce {get,set}_primary_affinity() helpers, primarily to return CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to abstract out osd_primary_affinity array allocation and initialization. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: primary_temp decode bitsIlya Dryomov1-0/+69
Add a common helper to decode both primary_temp (full map, map<pg_t, u32>) and new_primary_temp (inc map, same) and switch to it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: primary_temp infrastructureIlya Dryomov2-1/+16
Add primary_temp mappings infrastructure. struct ceph_pg_mapping is overloaded, primary_temp mappings are stored in an rb-tree, rooted at ceph_osdmap, in a manner similar to pg_temp mappings. Dump primary_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap, one 'primary_temp <pgid> <osd>' per line, e.g: primary_temp 2.6 4 Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: generalize ceph_pg_mappingIlya Dryomov2-6/+6
In preparation for adding support for primary_temp mappings, generalize struct ceph_pg_mapping so it can hold mappings other than pg_temp. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: introduce get_osdmap_client_data_v()Ilya Dryomov1-16/+65
Full and incremental osdmaps are structured identically and have identical headers. Add a helper to decode both "old" (16-bit version, v6) and "new" (8-bit struct_v+struct_compat+struct_len, v7) osdmap enconding headers and switch to it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: introduce decode{,_new}_pg_temp() and switch to themIlya Dryomov1-72/+67
Consolidate pg_temp (full map, map<pg_t, vector<u32>>) and new_pg_temp (inc map, same) decoding logic into a common helper and switch to it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: switch osdmap_set_max_osd() to krealloc()Ilya Dryomov1-15/+17
Use krealloc() instead of rolling our own. (krealloc() with a NULL first argument acts as a kmalloc()). Properly initalize the new array elements. This is needed to make future additions to osdmap easier. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: introduce decode{,_new}_pools() and switch to themIlya Dryomov1-37/+57
Consolidate pools (full map, map<u64, pg_pool_t>) and new_pools (inc map, same) decoding logic into a common helper and switch to it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: rename __decode_pool{,_names}() to decode_pool{,_names}()Ilya Dryomov1-6/+8
To be in line with all the other osdmap decode helpers. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: fix and clarify ceph_decode_need() sizesIlya Dryomov1-6/+7
Sum up sizeof(...) results instead of (incorrectly) hard-coding the number of bytes, expressed in ints and longs. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: nuke bogus encoding version check in osdmap_apply_incremental()Ilya Dryomov1-5/+4
Only version 6 of osdmap encoding is supported, anything other than version 6 results in an error and halts the decoding process. Checking if version is >= 5 is therefore bogus. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: fixup error handling in osdmap_apply_incremental()Ilya Dryomov1-32/+34
The existing error handling scheme requires resetting err to -EINVAL prior to calling any ceph_decode_* macro. This is ugly and fragile, and there already are a few places where we would return 0 on error, due to a missing reset. Follow osdmap_decode() and fix this by adding a special e_inval label to be used by all ceph_decode_* macros. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: fix crush_decode() call site in osdmap_decode()Ilya Dryomov1-5/+2
The size of the memory area feeded to crush_decode() should be limited not only by osdmap end, but also by the crush map length. Also, drop unnecessary dout() (dout() in crush_decode() conveys the same info) and step past crush map only if it is decoded successfully. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: check length of osdmap osd arraysIlya Dryomov1-4/+10
Check length of osd_state, osd_weight and osd_addr arrays. They should all have exactly max_osd elements after the call to osdmap_set_max_osd(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: safely decode max_osd value in osdmap_decode()Ilya Dryomov1-2/+4
max_osd value is not covered by any ceph_decode_need(). Use a safe version of ceph_decode_* macro to decode it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: fixup error handling in osdmap_decode()Ilya Dryomov1-26/+27
The existing error handling scheme requires resetting err to -EINVAL prior to calling any ceph_decode_* macro. This is ugly and fragile, and there already are a few places where we would return 0 on error, due to a missing reset. Fix this by adding a special e_inval label to be used by all ceph_decode_* macros. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: split osdmap allocation and decode stepsIlya Dryomov2-16/+30
Split osdmap allocation and initialization into a separate function, ceph_osdmap_decode(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: dump osdmap and enhance output on decode errorsIlya Dryomov1-6/+15
Dump osdmap in hex on both full and incremental decode errors, to make it easier to match the contents with error offset. dout() map epoch and max_osd value on success. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: dump pg_temp mappings to debugfsIlya Dryomov1-0/+11
Dump pg_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap, one 'pg_temp <pgid> [<osd>, ..., <osd>]' per line, e.g: pg_temp 2.6 [2,3,4] Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: do not prefix osd lines with \t in debugfs outputIlya Dryomov1-1/+1
To save screen space in anticipation of more fields (e.g. primary affinity). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04libceph: refer to osdmap directly in osdmap_show()Ilya Dryomov1-12/+14
To make it more readable and save screen space. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04crush: add SET_CHOOSELEAF_VARY_R stepIlya Dryomov1-0/+5
This lets you adjust the vary_r tunable on a per-rule basis. Reflects ceph.git commit f944ccc20aee60a7d8da7e405ec75ad1cd449fac. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04crush: add chooseleaf_vary_r tunableIlya Dryomov1-6/+24
The current crush_choose_firstn code will re-use the same 'r' value for the recursive call. That means that if we are hitting a collision or rejection for some reason (say, an OSD that is marked out) and need to retry, we will keep making the same (bad) choice in that recursive selection. Introduce a tunable that fixes that behavior by incorporating the parent 'r' value into the recursive starting point, so that a different path will be taken in subsequent placement attempts. Note that this was done from the get-go for the new crush_choose_indep algorithm. This was exposed by a user who was seeing PGs stuck in active+remapped after reweight-by-utilization because the up set mapped to a single OSD. Reflects ceph.git commit a8e6c9fbf88bad056dd05d3eb790e98a5e43451a. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04crush: allow crush rules to set (re)tries counts to 0Ilya Dryomov1-2/+2
These two fields are misnomers; they are *retry* counts. Reflects ceph.git commit f17caba8ae0cad7b6f8f35e53e5f73b444696835. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04crush: fix off-by-one errors in total_tries refactorIlya Dryomov1-19/+27
Back in 27f4d1f6bc32c2ed7b2c5080cbd58b14df622607 we refactored the CRUSH code to allow adjustment of the retry counts on a per-pool basis. That commit had an off-by-one bug: the previous "tries" counter was a *retry* count, not a *try* count, but the new code was passing in 1 meaning there should be no retries. Fix the ftotal vs tries comparison to use < instead of <= to fix the problem. Note that the original code used <= here, which means the global "choose_total_tries" tunable is actually counting retries. Compensate for that by adding 1 in crush_do_rule when we pull the tunable into the local variable. This was noticed looking at output from a user provided osdmap. Unfortunately the map doesn't illustrate the change in mapping behavior and I haven't managed to construct one yet that does. Inspection of the crush debug output now aligns with prior versions, though. Reflects ceph.git commit 795704fd615f0b008dcc81aa088a859b2d075138. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2014-04-04libceph: fix oops in ceph_msg_data_{pages,pagelist}_advance()Yan, Zheng1-0/+6
When there is no more data, ceph_msg_data_{pages,pagelist}_advance() should not move on to the next page. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03netfilter: nf_tables: fix wrong format in request_module()Pablo Neira Ayuso1-2/+2
The intended format in request_module is %.*s instead of %*.s. Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-03netfilter: nf_tables: set names cannot be larger than 15 bytesPablo Neira Ayuso1-1/+2
Currently, nf_tables trims off the set name if it exceeeds 15 bytes, so explicitly reject set names that are too large. Reported-by: Giuseppe Longo <giuseppelng@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-03netfilter: Add {ipt,ip6t}_osf aliases for xt_osfKirill Tkhai1-0/+2
There are no these aliases, so kernel can not request appropriate match table: $ iptables -I INPUT -p tcp -m osf --genre Windows --ttl 2 -j DROP iptables: No chain/target/match by that name. setsockopt() requests ipt_osf module, which is not present. Add the aliases. Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-03netfilter: x_tables: allow to use cgroup match for LOCAL_IN nf hooksAlexey Perevalov1-1/+2
This simple modification allows iptables to work with INPUT chain in combination with cgroup module. It could be useful for counting ingress traffic per cgroup with nfacct netfilter module. There were no problems to count the egress traffic that way formerly. It's possible to get classified sk_buff after PREROUTING, due to socket lookup being done in early_demux (tcp_v4_early_demux). Also it works for udp as well. Trivial usage example, assuming we're in the same shell every step and we have enough permissions: 1) Classic net_cls cgroup initialization: mkdir /sys/fs/cgroup/net_cls mount -t cgroup -o net_cls net_cls /sys/fs/cgroup/net_cls 2) Set up cgroup for interesting application: mkdir /sys/fs/cgroup/net_cls/wget echo 1 > /sys/fs/cgroup/net_cls/wget/net_cls.classid echo $BASHPID > /sys/fs/cgroup/net_cls/wget/cgroup.procs 3) Create kernel counters: nfacct add wget-cgroup-in iptables -A INPUT -m cgroup ! --cgroup 1 -m nfacct --nfacct-name wget-cgroup-in nfacct add wget-cgroup-out iptables -A OUTPUT -m cgroup ! --cgroup 1 -m nfacct --nfacct-name wget-cgroup-out 4) Network usage: wget https://www.kernel.org/pub/linux/kernel/v3.x/testing/linux-3.14-rc6.tar.xz 5) Check results: nfacct list Cgroup approach is being used for the DataUsage (counting & blocking traffic) feature for Samsung's modification of the Tizen OS. Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-03netfilter: connlimit: move lock array out of struct connlimit_dataFlorian Westphal1-9/+16
Eric points out that the locks can be global. Moreover, both Jesper and Eric note that using only 32 locks increases false sharing as only two cache lines are used. This increases locks to 256 (16 cache lines assuming 64byte cacheline and 4 bytes per spinlock). Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-03netfilter: connlimit: fix UP buildFlorian Westphal1-1/+1
cannot use ARRAY_SIZE() if spinlock_t is empty struct. Fixes: 1442e7507dd597 ("netfilter: connlimit: use keyed locks") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-03net-gro: reset skb->truesize in napi_reuse_skb()Eric Dumazet1-0/+1
Recycling skb always had been very tough... This time it appears GRO layer can accumulate skb->truesize adjustments made by drivers when they attach a fragment to skb. skb_gro_receive() can only subtract from skb->truesize the used part of a fragment. I spotted this problem seeing TcpExtPruneCalled and TcpExtTCPRcvCollapsed that were unexpected with a recent kernel, where TCP receive window should be sized properly to accept traffic coming from a driver not overshooting skb->truesize. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03Merge branch 'for-3.15' of ↵Linus Torvalds4-51/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "A lot updates for cgroup: - The biggest one is cgroup's conversion to kernfs. cgroup took after the long abandoned vfs-entangled sysfs implementation and made it even more convoluted over time. cgroup's internal objects were fused with vfs objects which also brought in vfs locking and object lifetime rules. Naturally, there are places where vfs rules don't fit and nasty hacks, such as credential switching or lock dance interleaving inode mutex and cgroup_mutex with object serial number comparison thrown in to decide whether the operation is actually necessary, needed to be employed. After conversion to kernfs, internal object lifetime and locking rules are mostly isolated from vfs interactions allowing shedding of several nasty hacks and overall simplification. This will also allow implmentation of operations which may affect multiple cgroups which weren't possible before as it would have required nesting i_mutexes. - Various simplifications including dropping of module support, easier cgroup name/path handling, simplified cgroup file type handling and task_cg_lists optimization. - Prepatory changes for the planned unified hierarchy, which is still a patchset away from being actually operational. The dummy hierarchy is updated to serve as the default unified hierarchy. Controllers which aren't claimed by other hierarchies are associated with it, which BTW was what the dummy hierarchy was for anyway. - Various fixes from Li and others. This pull request includes some patches to add missing slab.h to various subsystems. This was triggered xattr.h include removal from cgroup.h. cgroup.h indirectly got included a lot of files which brought in xattr.h which brought in slab.h. There are several merge commits - one to pull in kernfs updates necessary for converting cgroup (already in upstream through driver-core), others for interfering changes in the fixes branch" * 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (74 commits) cgroup: remove useless argument from cgroup_exit() cgroup: fix spurious lockdep warning in cgroup_exit() cgroup: Use RCU_INIT_POINTER(x, NULL) in cgroup.c cgroup: break kernfs active_ref protection in cgroup directory operations cgroup: fix cgroup_taskset walking order cgroup: implement CFTYPE_ONLY_ON_DFL cgroup: make cgrp_dfl_root mountable cgroup: drop const from @buffer of cftype->write_string() cgroup: rename cgroup_dummy_root and related names cgroup: move ->subsys_mask from cgroupfs_root to cgroup cgroup: treat cgroup_dummy_root as an equivalent hierarchy during rebinding cgroup: remove NULL checks from [pr_cont_]cgroup_{name|path}() cgroup: use cgroup_setup_root() to initialize cgroup_dummy_root cgroup: reorganize cgroup bootstrapping cgroup: relocate setting of CGRP_DEAD cpuset: use rcu_read_lock() to protect task_cs() cgroup_freezer: document freezer_fork() subtleties cgroup: update cgroup_transfer_tasks() to either succeed or fail cgroup: drop task_lock() protection around task->cgroups cgroup: update how a newly forked task gets associated with css_set ...
2014-04-03tipc: fix regression bug where node events are not being generatedErik Hugne1-0/+3
Commit 5902385a2440a55f005b266c93e0bb9398e5a62b ("tipc: obsolete the remote management feature") introduces a regression where node topology events are not being generated because the publication that triggers this: {0, <z.c.n>, <z.c.n>} is no longer available. This will break applications that rely on node events to discover when nodes join/leave a cluster. We fix this by advertising the node publication when TIPC enters networking mode, and withdraws it upon shutdown. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03net: add busy_poll device featureJiri Pirko2-0/+8
Currently there is no way how to find out if a device supports busy polling. So add a feature and make it dependent on ndo_busy_poll existence. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03packet: fix packet_direct_xmit for BQL enabled driversDaniel Borkmann1-1/+1
Currently, in packet_direct_xmit() we test the assigned netdevice queue for netif_xmit_frozen_or_stopped() before doing an ndo_start_xmit(). This can have the side-effect that BQL enabled drivers which make use of netdev_tx_sent_queue() internally, set __QUEUE_STATE_STACK_XOFF from within the stack and would not fully fill the device's TX ring from packet sockets with PACKET_QDISC_BYPASS enabled. Instead, use a test without BQL bit so that bursts can be absorbed into the NICs TX ring. Fix and code suggested by Eric Dumazet, thanks! Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03packet: report tx_dropped in packet_direct_xmitDaniel Borkmann1-0/+1
Since commit 015f0688f57c ("net: net: add a core netdev->tx_dropped counter"), we can now account for TX drops from within the core stack instead of drivers. Therefore, fix packet_direct_xmit() and increase drop count when we encounter a problem before driver's xmit function was called (we do not want to doubly account for it). Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03s390/irq: Use defines for external interruption codesThomas Huth1-3/+3
Use the new defines for external interruption codes to get rid of "magic" numbers in the s390 source code. And while we're at it, also rename the (un-)register_external_interrupt function to something shorter so that this patch does not exceed the 80 columns all over the place. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds342-7311/+15444
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
2014-04-03libceph: add support for CEPH_OSD_OP_SETALLOCHINT osd opIlya Dryomov1-0/+27
This is primarily for rbd's benefit and is supposed to combat fragmentation: "... knowing that rbd images have a 4m size, librbd can pass a hint that will let the osd do the xfs allocation size ioctl on new files so that they are allocated in 1m or 4m chunks. We've seen cases where users with rbd workloads have very high levels of fragmentation in xfs and this would mitigate that and probably have a pretty nice performance benefit." SETALLOCHINT is considered advisory, so our backwards compatibility mechanism here is to set FAILOK flag for all SETALLOCHINT ops. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03libceph: encode CEPH_OSD_OP_FLAG_* op flagsIlya Dryomov1-0/+2
Encode ceph_osd_op::flags field so that it gets sent over the wire. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03libceph: a per-osdc crush scratch bufferIlya Dryomov1-9/+16
With the addition of erasure coding support in the future, scratch variable-length array in crush_do_rule_ary() is going to grow to at least 200 bytes on average, on top of another 128 bytes consumed by rawosd/osd arrays in the call chain. Replace it with a buffer inside struct osdmap and a mutex. This shouldn't result in any contention, because all osd requests were already serialized by request_mutex at that point; the only unlocked caller was ceph_ioctl_get_dataloc(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 02:51:51 +0000