summaryrefslogtreecommitdiffstats
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2015-01-19Revert "wireless: Support of IFLA_INFO_KIND rtnl attribute"Johannes Berg1-6/+0
This reverts commit ba1debdfed974f25aa598c283567878657b292ee. Oliver reported that it breaks network-manager, for some reason with this patch NM decides that the device isn't wireless but "generic" (ethernet), sees no carrier (as expected with wifi) and fails to do anything else with it. Revert this to unbreak userspace. Reported-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-9/+18
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16cfg80211: fix checking nl80211_send_station() return valueJohannes Berg1-1/+1
The return value from nl80211_send_station() is the length of the skb, or a negative error, so abort sending the message only when the return value was negative. This fixes the ibss_rsn wpa_supplicant test case. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-15Merge tag 'mac80211-for-davem-2015-01-15' of ↵David S. Miller1-22/+34
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Just two fixes - one for an uninialized variable and one for a deadlock in regulatory processing. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge tag 'mac80211-next-for-davem-2015-01-15' of ↵David S. Miller9-233/+676
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Here's a big pile of changes for this round. We have * a lot of regulatory code changes to deal with the way newer Intel devices handle this * a change to drop packets while disconnecting from an AP instead of trying to wait for them * a new attempt at improving the tailroom accounting to not kick in too much for performance reasons * improvements in wireless link statistics * many other small improvements and small fixes that didn't seem necessary for 3.19 (e.g. in hwsim which is testing only code) Conflicts: drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c Minor overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15cfg80211: change bandwidth reporting to explicit fieldJohannes Berg2-17/+47
For some reason, we made the bandwidth separate flags, which is rather confusing - a single rate cannot have different bandwidths at the same time. Change this to no longer be flags but use a separate field for the bandwidth ('bw') instead. While at it, add support for 5 and 10 MHz rates - these are reported as regular legacy rates with their real bitrate, but tagged as 5/10 now to make it easier to distinguish them. In the nl80211 API, the flags are preserved, but the code now can also clearly only set a single one of the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-15cfg80211: remove 80+80 MHz rate reportingJohannes Berg2-5/+1
These rates are treated the same as 160 MHz in the spec, so it makes no sense to distinguish them. As no driver uses them yet, this is also not a problem, just remove them. In the userspace API the field remains reserved to preserve API and ABI. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14nl80211: send netdetect configuration info in NL80211_CMD_GET_WOWLANLuciano Coelho1-0/+52
Send the netdetect configuration information in the response to NL8021_CMD_GET_WOWLAN commands. This includes the scan interval, SSIDs to match and frequencies to scan. Additionally, add the NL80211_WOWLAN_TRIG_NET_DETECT with NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14cfg80211: avoid reg-hints in self-managed only systemsArik Nemtsov1-0/+25
When a system contains only self-managed regulatory devices all hints from the regulatory core are ignored. Stop hint processing early in this case. These systems usually don't have CRDA deployed, which results in endless (irrelevent) logs of the form: cfg80211: Calling CRDA to update world regulatory domain Make sure there's at least one self-managed device before discarding a hint, in order to prevent initial hints from disappearing on CRDA managed systems. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14cfg80211: introduce sync regdom set API for self-managedArik Nemtsov1-2/+29
A self-managed device will sometimes need to set its regdomain synchronously. Notably it should be set before usermode has a chance to query it. Expose a new API to accomplish this which requires the RTNL. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-2/+2
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-08nl80211: support per-TID station statisticsJohannes Berg1-0/+41
The base for the current statistics is pretty mixed up, support exporting RX/TX statistics for MSDUs per TID. This (currently) covers received MSDUs, transmitted MSDUs and retries/failures thereof. Doing it per TID for MSDUs makes more sense than say only per AC because it's symmetric - we could export per-AC statistics for all frames (which AC we used for transmission can be determined also for management frames) but per TID is better and usually data frames are really the ones we care about. Also, on RX we can't determine the AC - but we do know the TID for any QoS MPDU we received. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: add nl80211 beacon-only statisticsJohannes Berg1-0/+2
Add these two values: * BEACON_RX: number of beacons received from this peer * BEACON_SIGNAL_AVG: signal strength average for beacons only These can then be used for Android Lollipop's statistics request. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove enum station_info_flagsJohannes Berg2-90/+53
This is really just duplicating the list of information that's already available in the nl80211 attribute, so remove the list. Two small changes are needed: * remove STATION_INFO_ASSOC_REQ_IES complete, but the length (assoc_req_ies_len) can be used instead * add NL80211_STA_INFO_RX_DROP_MISC which exists internally but not in nl80211 yet This gets rid of the duplicate maintenance of the two lists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: allow including station info in delete eventJohannes Berg1-22/+16
When a station is removed, its statistics may be interesting to userspace, for example for further aggregation of statistics of all stations that ever connected to an AP. Introduce a new cfg80211_del_sta_sinfo() function (and make the cfg80211_del_sta() a static inline calling it) to allow passing a struct station_info along with this, and send the data in the nl80211 event message. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: add scan time to survey dataJohannes Berg2-2/+9
Add the time spent scanning to the survey data so it can be reported by drivers that collect such information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: allow survey data to return global dataJohannes Berg1-13/+18
Not all devices are able to report survey data (particularly time spent for various operations) per channel. As all these statistics already exist in survey data, allow such devices to report them (if userspace requested it) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove "channel" from survey namesJohannes Berg2-28/+28
All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-07cfg80211: fix deadlock during reg chan checkArik Nemtsov1-22/+34
If a P2P GO is active, the cfg80211_reg_can_beacon function will take the wdev lock, in its call to cfg80211_go_permissive_chan. But the wdev lock is already taken by the parent channel-checking function, causing a deadlock. Split the checking code into two parts. The first part will check if the wdev is active and saves the channel under the wdev lock. The second part will check actual channel validity according to type. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-07Merge branch 'mac80211' into mac80211-nextJohannes Berg3-11/+20
Merge mac80211.git to get some changes that would otherwise cause conflicts with new changes coming here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-06nl80211: define multicast group names in headerJohannes Berg1-6/+6
Put the group names into the userspace API header file so that userspace clients can use symbolic names from there instead of hardcoding the actual names. This doesn't really change much, but seems somewhat cleaner. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-06cfg80211: add extensible feature flag attributeGautam Kumar Shukla1-0/+5
With the wiphy::features flag being used up this patch adds a new field wiphy::ext_features. Considering extensibility this new field is declared as a byte array. This extensible flag is exposed to user-space by NL80211_ATTR_EXT_FEATURES. Cc: Avinash Patil <patila@marvell.com> Signed-off-by: Gautam (Gautam Kumar) Shukla <gautams@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-30Revert "cfg80211: make WEXT compatibility unselectable"Jiri Kosina1-1/+1
This reverts commit 24a0aa212ee2dbe44360288684478d76a8e20a0a. It's causing severe userspace breakage. Namely, all the utilities from wireless-utils which are relying on CONFIG_WEXT (which means tools like 'iwconfig', 'iwlist', etc) are not working anymore. There is a 'iw' utility in newer wireless-tools, which is supposed to be a replacement for all the "deprecated" binaries, but it's far away from being massively adopted. Please see [1] for example of the userspace breakage this is causing. In addition to that, Larry Finger reports [2] that this patch is also causing ipw2200 driver being impossible to build. To me this clearly shows that CONFIG_WEXT is far, far away from being "deprecated enough" to be removed. [1] http://thread.gmane.org/gmane.linux.kernel/1857010 [2] http://thread.gmane.org/gmane.linux.network/343688 Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-18nl80211: Stop scheduled scan if netlink client disappearsJukka Rissanen3-0/+34
An attribute NL80211_ATTR_SOCKET_OWNER can be set by the scan initiator. If present, the attribute will cause the scan to be stopped if the client dies. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-18nl80211: Convert sched_scan_req pointer to RCU pointerJukka Rissanen4-17/+27
Because of possible races when accessing sched_scan_req pointer in rdev, the sched_scan_req is converted to RCU pointer. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-17cfg80211: avoid intersection when applying self-managed regArik Nemtsov1-3/+13
The custom-reg handling function can currently only add flags to a given channel. This results in stale flags being left applied. In some cases a channel was disabled and even the orig_flags were changed to reflect this. Previously the API was designed for a single invocation before wiphy registration, so this didn't matter. The previous approach doesn't scale well to self-managed regulatory devices, particularly when a more permissive regdom is applied after a restrictive one. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-17cfg80211: return private regdom for self-managed devicesArik Nemtsov1-0/+24
If a device has self-managed regulatory, insist on returning the wiphy specific regdomain if a wiphy-idx is specified. The global regdomain is meaningless for such devices. Also add an attribute for self-managed devices, so usermode can distinguish them as such. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-17cfg80211: allow wiphy specific regdomain managementJonathan Doron5-19/+149
Add a new regulatory flag that allows a driver to manage regdomain changes/updates for its own wiphy. A self-managed wiphys only employs regulatory information obtained from the FW and driver and does not use other cfg80211 sources like beacon-hints, country-code IEs and hints from other devices on the same system. Conversely, a self-managed wiphy does not share its regulatory hints with other devices in the system. If a system contains several devices, one or more of which are self-managed, there might be contradictory regulatory settings between them. Usage of flag is generally discouraged. Only use it if the FW/driver is incompatible with non-locally originated hints. A new API lets the driver send a complete regdomain, to be applied on its wiphy only. After a wiphy-specific regdomain change takes place, usermode will get a new type of change notification. The regulatory core also takes care enforce regulatory restrictions, in case some interfaces are on forbidden channels. Signed-off-by: Jonathan Doron <jonathanx.doron@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-17cfg80211: allow usermode to query wiphy specific regdomArik Nemtsov3-34/+142
If a wiphy-idx is specified, the kernel will return the wiphy specific regdomain, if such exists. Otherwise return the global regdom. When no wiphy-idx is specified, return the global regdomain as well as all wiphy-specific regulatory domains in the system, via a new nested list of attributes. Add a new attribute for each wiphy-specific regdomain, for usermode to identify it as such. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12wireless: Support of IFLA_INFO_KIND rtnl attributeVadim Kochan1-0/+6
It allows to identify the wlan kind of device for the user application, e.g.: # ip -d link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 2: enp0s25: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff promiscuity 0 3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff promiscuity 0 wlan Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> [make wireless_link_ops const] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12cfg80211: correctly check ad-hoc channelsArik Nemtsov1-1/+7
Ad-hoc requires beaconing for regulatory purposes. Validate that the channel is valid for beaconing, and not only enabled. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12cfg80211: don't WARN about two consecutive Country IE hintEmmanuel Grumbach1-5/+2
This can happen and there is no point in added more detection code lower in the stack. Catching these in one single point (cfg80211) is enough. Stop WARNING about this case. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=89001 Cc: stable@vger.kernel.org Fixes: 2f1c6c572d7b ("cfg80211: process non country IE conflicting first") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12nl80211: check matches array length before acessing itLuciano Coelho1-1/+1
If the userspace passes a malformed sched scan request (or a net detect wowlan configuration) by adding a NL80211_ATTR_SCHED_SCAN_MATCH attribute without any nested matchsets, a NULL pointer dereference will occur. Fix this by checking that we do have matchsets in our array before trying to access it. BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 IP: [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] PGD 865c067 PUD 865b067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [last unloaded: compat] CPU: 2 PID: 2442 Comm: iw Tainted: G O 3.17.2 #31 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880013800790 ti: ffff880008d80000 task.ti: ffff880008d80000 RIP: 0010:[<ffffffffa002fd69>] [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] RSP: 0018:ffff880008d838d0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000143c RSI: 0000000000000000 RDI: ffff880008ee8dd0 RBP: ffff880008d83948 R08: 0000000000000002 R09: 0000000000000019 R10: ffff88001d1b3c40 R11: 0000000000000002 R12: ffff880019e85e00 R13: 00000000fffffed4 R14: ffff880009757800 R15: 0000000000001388 FS: 00007fa3b6d13700(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000024 CR3: 0000000008670000 CR4: 00000000000006e0 Stack: ffff880009757800 ffff880000000001 0000000000000000 ffff880008ee84e0 0000000000000000 ffff880009757800 00000000fffffed4 ffff880008d83948 ffffffff814689c9 ffff880009757800 ffff880008ee8000 0000000000000000 Call Trace: [<ffffffff814689c9>] ? nla_parse+0xb9/0x120 [<ffffffffa00306de>] nl80211_set_wowlan+0x75e/0x960 [cfg80211] [<ffffffff810bf3d5>] ? mark_held_locks+0x75/0xa0 [<ffffffff8161a77b>] genl_family_rcv_msg+0x18b/0x360 [<ffffffff810bf66d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8161a9d4>] genl_rcv_msg+0x84/0xc0 [<ffffffff8161a950>] ? genl_family_rcv_msg+0x360/0x360 [<ffffffff81618e79>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81619458>] genl_rcv+0x28/0x40 [<ffffffff816184a5>] netlink_unicast+0x105/0x180 [<ffffffff8161886f>] netlink_sendmsg+0x34f/0x7a0 [<ffffffff8105a097>] ? kvm_clock_read+0x27/0x40 [<ffffffff815c644d>] sock_sendmsg+0x8d/0xc0 [<ffffffff811a75c9>] ? might_fault+0xb9/0xc0 [<ffffffff811a756e>] ? might_fault+0x5e/0xc0 [<ffffffff815d5d26>] ? verify_iovec+0x56/0xe0 [<ffffffff815c73e0>] ___sys_sendmsg+0x3d0/0x3e0 [<ffffffff810a7be8>] ? sched_clock_cpu+0x98/0xd0 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff810bb39f>] ? up_read+0x1f/0x40 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff812146ed>] ? __fget_light+0x13d/0x160 [<ffffffff815c7b02>] __sys_sendmsg+0x42/0x80 [<ffffffff815c7b52>] SyS_sendmsg+0x12/0x20 [<ffffffff81751f69>] system_call_fastpath+0x16/0x1b Fixes: ea73cbce4e1f ("nl80211: fix scheduled scan RSSI matchset attribute confusion") Cc: stable@vger.kernel.org [3.15+] Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12cfg80211: use __force __rcu to suppress sparse warningJohannes Berg1-1/+1
The code assigns a constant value (a pointer to a static variable) to an RCU pointer, which results in a sparse warning: reg.c:112:10: warning: cast adds address space to expression (<asn:4>) Suppress this warning by using __force. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12cfg80211: avoid mem leak on driver hint setArik Nemtsov1-1/+4
In the already-set and intersect case of a driver-hint, the previous wiphy regdomain was not freed before being reset with a copy of the cfg80211 regdomain. Cc: stable@vger.kernel.org Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12cfg80211: Fix 160 MHz channels with 80+80 and 160 MHz driversJouni Malinen1-3/+6
The VHT supported channel width field is a two bit integer, not a bitfield. cfg80211_chandef_usable() was interpreting it incorrectly and ended up rejecting 160 MHz channel width if the driver indicated support for both 160 and 80+80 MHz channels. Cc: stable@vger.kernel.org (3.16+) Fixes: 3d9d1d6656a73 ("nl80211/cfg80211: support VHT channel configuration") (however, no real drivers had 160 MHz support it until 3.16) Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28cfg80211: remove unneeded initialisations in nl80211_set_regJohannes Berg1-3/+3
Some variables are assigned unconditionally, remove their initialisations to help avoid introducing errors later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28cfg80211: leave invalid channels on regdomain changeArik Nemtsov2-1/+120
When the regulatory settings change, some channels might become invalid. Disconnect interfaces acting on these channels, after giving userspace code a grace period to leave them. This mode is currently opt-in, and not all interface operating modes are supported for regulatory-enforcement checks. A wiphy that wishes to use the new enforcement code must specify an appropriate regulatory flag, and all its supported interface modes must be supported by the checking code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> [fix some indentation, typos] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28cfg80211: make WEXT compatibility unselectableJohannes Berg1-1/+1
This option has been marked for deprecation and removal for a little more than two years, but it's not been very clearly signalled since it was always possible to just select it. Make it unselectable now to signal anyone who's still using it after all this time more clearly. They can still get it back, but only by patching the kernel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27nl80211: don't crash sending invalid chandefJohannes Berg1-1/+2
One of the cases for an invalid channel definition is that the channel pointer is NULL, in which case the warning is a bit late since we'll dereference the pointer. Bail out of the function upon warning about this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-26cfg80211: clean up beacon loss CQM eventJohannes Berg1-0/+23
Having it as a sub-event for RSSI thresholds is very ugly, but luckily no userspace actually uses the events yet. Move the event to its own function call internally and to its own event attribute in nl80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-26cfg80211: refactor the various CQM event sending codeJohannes Berg1-123/+99
Much of the code can be shared by moving it into helper functions for the CQM event sending. Also move the code closer together, even in the header file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-25cfg80211: remove pointless channel lookup in survey codeJohannes Berg1-5/+1
We have a channel pointer, and we use its center frequency to look up a channel pointer - which will thus be exactly the same as the original pointer. Remove that pointless lookup and just use the pointer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19nl80211: Broadcast CMD_NEW_INTERFACE and CMD_DEL_INTERFACETomasz Bursztyka1-7/+41
Let the other listeners being notified when a new or del interface command has been issued, thus reducing later necessary request to be in sync with current context. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19nl80211: Replace interface socket owner attribute with more generic oneJukka Rissanen1-2/+2
Replace NL80211_ATTR_IFACE_SOCKET_OWNER attribute with more generic NL80211_ATTR_SOCKET_OWNER that can be used with other commands that interface creation. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: protect fools returning NULL in add_virtual_intfRafał Miłecki1-1/+4
Callback add_virtual_intf is supposed to return ERR_PTR and trying to return NULL results in some "Unable to handle kernel paging request", etc. As it may be complicated to debug & trace, let's catch it (WARN). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: explicitly initialize some fields in custom reg pathArik Nemtsov1-0/+3
Explicitly initialize the DFS state and beacon found state when handling channels in the custom regulatory path. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: update missing fields in custom regulatory pathArik Nemtsov1-0/+10
Some channels fields were not being updated in the custom regulatory path. Update them according to the code in handle_channel(). Signed-off-by: Jonathan Doron <jonathanx.doron@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: allow drivers to support random MAC addresses for scanJohannes Berg1-3/+83
Add the necessary feature flags and a scan flag to support using random MAC addresses for scan while unassociated. The configuration for this supports an arbitrary MAC address value and mask, so that any kind of configuration (e.g. fixed OUI or full 46-bit random) can be requested. Full 46-bit random is the default when no other configuration is passed. Also add a small helper function to use the addr/mask correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: add wowlan net-detect supportLuciano Coelho2-1/+111
Add a new WoWLAN API to enable net-detect as a wake up trigger. Net-detect allows the device to scan in the background while the host is asleep to wake up the host system when a matching network is found. Reuse the scheduled scan attributes to specify how the scan is performed while suspended and the matches that will trigger a wake event. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 10:15:21 +0000