summaryrefslogtreecommitdiffstats
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2012-06-13cfg80211: fix potential deadlock in regulatoryEliad Peller1-1/+1
reg_timeout_work() calls restore_regulatory_settings() which takes cfg80211_mutex. reg_set_request_processed() already holds cfg80211_mutex before calling cancel_delayed_work_sync(reg_timeout), so it might deadlock. Call the async cancel_delayed_work instead, in order to avoid the potential deadlock. This is the relevant lockdep warning: cfg80211: Calling CRDA for country: XX ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc5-wl+ #26 Not tainted ------------------------------------------------------- kworker/0:2/1391 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] but task is already holding lock: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((reg_timeout).work){+.+...}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c005b600>] wait_on_work+0x4c/0x154 [<c005c000>] __cancel_work_timer+0xd4/0x11c [<c005c064>] cancel_delayed_work_sync+0x1c/0x20 [<bf28b274>] reg_set_request_processed+0x50/0x78 [cfg80211] [<bf28bd84>] set_regdom+0x550/0x600 [cfg80211] [<bf294cd8>] nl80211_set_reg+0x218/0x258 [cfg80211] [<c03c7738>] genl_rcv_msg+0x1a8/0x1e8 [<c03c6a00>] netlink_rcv_skb+0x5c/0xc0 [<c03c7584>] genl_rcv+0x28/0x34 [<c03c6720>] netlink_unicast+0x15c/0x228 [<c03c6c7c>] netlink_sendmsg+0x218/0x298 [<c03933c8>] sock_sendmsg+0xa4/0xc0 [<c039406c>] __sys_sendmsg+0x1e4/0x268 [<c0394228>] sys_sendmsg+0x4c/0x70 [<c0013840>] ret_fast_syscall+0x0/0x3c -> #1 (reg_mutex){+.+.+.}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28b2cc>] reg_todo+0x30/0x538 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 -> #0 (cfg80211_mutex){+.+.+.}: [<c008ed58>] print_circular_bug+0x68/0x2cc [<c008fb28>] validate_chain+0x978/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] [<bf28b200>] reg_timeout_work+0x1c/0x20 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex --> (reg_timeout).work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((reg_timeout).work); lock(reg_mutex); lock((reg_timeout).work); lock(cfg80211_mutex); *** DEADLOCK *** 2 locks held by kworker/0:2/1391: #0: (events){.+.+.+}, at: [<c0059e94>] process_one_work+0x1f0/0x480 #1: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 stack backtrace: [<c001b928>] (unwind_backtrace+0x0/0x12c) from [<c0471d3c>] (dump_stack+0x20/0x24) [<c0471d3c>] (dump_stack+0x20/0x24) from [<c008ef70>] (print_circular_bug+0x280/0x2cc) [<c008ef70>] (print_circular_bug+0x280/0x2cc) from [<c008fb28>] (validate_chain+0x978/0x10f0) [<c008fb28>] (validate_chain+0x978/0x10f0) from [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) from [<c0090d40>] (lock_acquire+0xf0/0x114) [<c0090d40>] (lock_acquire+0xf0/0x114) from [<c04734dc>] (mutex_lock_nested+0x48/0x320) [<c04734dc>] (mutex_lock_nested+0x48/0x320) from [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) from [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) from [<c0059f44>] (process_one_work+0x2a0/0x480) [<c0059f44>] (process_one_work+0x2a0/0x480) from [<c005a4b4>] (worker_thread+0x1bc/0x2bc) [<c005a4b4>] (worker_thread+0x1bc/0x2bc) from [<c0061148>] (kthread+0x98/0xa4) [<c0061148>] (kthread+0x98/0xa4) from [<c0014af4>] (kernel_thread_exit+0x0/0x8) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Cc: stable@kernel.org Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-09cfg80211: check iface combinations only when iface is runningMichal Kazior1-1/+1
Don't validate interface combinations on a stopped interface. Otherwise we might end up being able to create a new interface with a certain type, but won't be able to change an existing interface into that type. This also skips some other functions when interface is stopped and changing interface type. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-05cfg80211: fix interface combinations checkJohannes Berg1-1/+18
If a given interface combination doesn't contain a required interface type then we missed checking that and erroneously allowed it even though iface type wasn't there at all. Add a check that makes sure that all interface types are accounted for. Cc: stable@kernel.org Reported-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04cfg80211: use sme_state in ibss start/join pathAmitkumar Karwar1-1/+5
CFG80211_DEV_WARN_ON() at "net/wireless/ibss.c line 63" is unnecessarily triggered even after successful connection, when cfg80211_ibss_joined() is called by driver inside .join_ibss handler. This patch fixes the problem by changing 'sme_state' in ibss path and having WARN_ON() check for 'sme_state' similar to infra association. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextJohn W. Linville5-38/+41
2012-05-16nl80211: refactor valid channel type checkJohannes Berg1-30/+29
There are four instances in nl80211 of getting the channel type from the attribute and validating it, refactor those. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16cfg80211: fix cfg80211_can_beacon_sec_chan prototypeJohannes Berg1-1/+1
It should return bool, not int. The function even does return true/false. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16nl80211: prevent additions to old station flags APIJohannes Berg1-2/+8
We don't really want/need to maintain the old station flags API any more, so refuse changes to new (not yet defined) flags from the old flags API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16cfg80211: add warning when calculating MCS rates >= 32Johannes Berg1-1/+1
cfg80211_calculate_bitrate() doesn't work for MCS rates 32 or higher, and it has always returned 0 in that case. Warn if it ever really happens. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16cfg80211: remove double prototypeJohannes Berg1-2/+0
cfg80211_calculate_bitrate() is defined in the external header file cfg80211.h now, so no need to keep it in the internal one as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16Net: wireless: core.c: fixed checkpatch warningsCristian Chilipirea1-2/+2
Fixed some checkpatch warnings. Signed-off-by: Cristian Chilipirea <cristian.chilipirea@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches2-56/+27
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14Merge branch 'master' of ↵David S. Miller4-2/+41
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-05-09wireless: Convert compare_ether_addr to ether_addr_equal by handJoe Perches1-3/+3
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09wireless: Convert compare_ether_addr to ether_addr_equalJoe Perches6-23/+21
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. I removed a conversion from scan.c/cmp_bss_core that appears to be a sorting function. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08{nl,cfg,mac}80211: Allow user to see/configure HT protection modeAshok Nagarajan2-1/+7
This patch introduces a new mesh configuration parameter "ht_opmode" and will allow user to check the current HT protection mode selected. Users could configure the protection mode by the command "iw mesh_iface set mesh_param mesh_ht_protection_mode=2". The default protection mode of mesh is set to non-HT mixed mode. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08cfg80211: fix BSS comparisonEmmanuel Grumbach1-1/+5
Since the BSS table is organized in a RB tree, the BSSs need to be comparable. This means that we must define a < and > operator to the BSS object. compare_ethr_addr isn't enough since it returns only a binary value. Since Felix's cfg80211: use compare_ether_addr on MAC addresses instead of memcmp Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> The BSS table is corrupted: rb_find_bss can't find the bss. As a result BSSes are duplicated in the BSS table, and we get stuck while probing an AP before associating (in STA mode). Change-Id: I85928756f4328028230832c1565ece7f412f3843 CC: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08cfg80211: Add framework to support ethtool stats.Ben Greear1-0/+29
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-26Merge branch 'master' of ↵John W. Linville1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23cfg80211: Validate legacy rateset.Bala Shanmugam1-0/+3
Legacy rates are not validated while configuring tx rateset using iw. So below cmd is accepted by nl80211. sudo iw wlan2 set bitrates legacy-2.4 1 2 3 Validate legacy rates and return error if any rate in the rateset is not valid. Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-18Merge branch 'master' of ↵John W. Linville5-13/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c include/net/nfc/nfc.h net/nfc/netlink.c net/wireless/nl80211.c
2012-04-16cfg80211: increse bss expire timeRajkumar Manoharan1-1/+1
The background scan completion takes more time when the station is having heavy uplink traffic. The scan state machine decides to fall back to home channel on every off-channel visit when there are pending frames in tx queue. bgscan completion took ~30sec on dual band US regulatory card. scan period = (20 active channels * probe timeout) + (12 passive channels * passive probe timeout) + (32 * timeout on home channel) + (32 * flush timeout) Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16cfg80211: enforce lack of interface combinationsJohannes Berg2-11/+3
My grand plan to allow drivers to gradually move over to advertising virtual interface combinations and only enforce with drivers that do want it enforced doesn't seem to be working out, only Christian ever added the advertising (to carl9170), nobody else did. Begin enforcing combinations in cfg80211 so that users can rely on the information reported about a device. Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet1-3/+3
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13cfg80211: Add channel information to NL80211_CMD_GET_INTERFACEPontus Fuchs2-1/+15
If the current channel is known, add frequency and channel type to NL80211_CMD_GET_INTERFACE. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13cfg80211: fix interface combinations check.Lukasz Kucharczyk1-1/+1
Signed-off-by: Lukasz Kucharczyk <lukasz.kucharczyk@tieto.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12Merge branch 'master' into for-davemJohn W. Linville8-34/+147
Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c net/wireless/nl80211.c
2012-04-12Merge branch 'master' of ↵John W. Linville3-23/+24
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-11cfg80211: add channel switch notify eventThomas Pedersen3-0/+63
The firmware may decide to switch channels while already beaconing, e.g. in response to a cfg80211 connect request on a different vif. Add this event to notify userspace when an AP or GO interface has successfully migrated to a new channel, so it can update its configuration accordingly. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11cfg80211/mac80211: enable proper device_set_wakeup_enable handlingJohannes Berg2-1/+8
In WoWLAN, we only get the triggers when we actually get to suspend. As a consequence, drivers currently don't know that the device should enable wakeup. However, the device_set_wakeup_enable() API is intended to be called when the wakeup is enabled, not later when needed. Add a new set_wakeup() call to cfg80211 and mac80211 to allow drivers to properly call device_set_wakeup_enable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10{nl,cfg}80211: Support for mesh synchronizationJavier Cardona2-0/+19
Report Toffset to userspace. Let userspace select the mesh synchronization method. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10cfg80211/nl80211: clarify TX queue APIJohannes Berg1-2/+5
With the plan to change mac80211's queue API to not map ACs to queues 1:1, it seems necessary to clarify some APIs that act on ACs rather than on queues to spell that out explicitly. Do this. Also verify that the AC number given is valid. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+2
2012-04-09cfg80211: warn if db.txt is empty with CONFIG_CFG80211_INTERNAL_REGDBLuis R. Rodriguez1-0/+10
It has happened twice now where elaborate troubleshooting has undergone on systems where CONFIG_CFG80211_INTERNAL_REGDB [0] has been set but yet net/wireless/db.txt was not updated. Despite the documentation on this it seems system integrators could use some more help with this, so throw out a kernel warning at boot time when their database is empty. This does mean that the error-prone system integrator won't likely realize the issue until they boot the machine but -- it does not seem to make sense to enable a build bug breaking random build testing. [0] http://wireless.kernel.org/en/developers/Regulatory/CRDA#CONFIG_CFG80211_INTERNAL_REGDB Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Youngsin Lee <youngsin@qualcomm.com> Cc: Raja Mani <rmani@qca.qualcomm.com> Cc: Senthil Kumar Balasubramanian <senthilb@qca.qualcomm.com> Cc: Vipin Mehta <vipimeht@qca.qualcomm.com> Cc: yahuan@qca.qualcomm.com Cc: jjan@qca.qualcomm.com Cc: vthiagar@qca.qualcomm.com Cc: henrykim@qualcomm.com Cc: jouni@qca.qualcomm.com Cc: athiruve@qca.qualcomm.com Cc: cjkim@qualcomm.com Cc: philipk@qca.qualcomm.com Cc: sunnykim@qualcomm.com Cc: sskwak@qualcomm.com Cc: kkim@qualcomm.com Cc: mattbyun@qualcomm.com Cc: ryanlee@qualcomm.com Cc: simbap@qualcomm.com Cc: krislee@qualcomm.com Cc: conner@qualcomm.com Cc: hojinkim@qualcomm.com Cc: honglee@qualcomm.com Cc: johnwkim@qualcomm.com Cc: jinyong@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09cfg80211: use compare_ether_addr on MAC addresses instead of memcmpFelix Fietkau2-16/+18
Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09net/wireless/wext-core.c: add missing kfreeJulia Lawall1-2/+4
Free extra as done in the error-handling code just above. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09nl80211: ensure interface is up in various APIsJohannes Berg1-13/+18
The nl80211 handling code should ensure as much as it can that the interface is in a valid state, it can certainly ensure the interface is running. Not doing so can cause calls through mac80211 into the driver that result in warnings and unspecified behaviour in the driver. Cc: stable@vger.kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-8/+2
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd1-8/+2
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-01wireless: Stop using NLA_PUT*().David S. Miller2-545/+662
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-26cfg80211: allow CFG80211_SIGNAL_TYPE_UNSPEC in station_infoJohn W. Linville1-10/+19
The station_info struct had demanded dBm signal values, but the cfg80211 wireless extensions implementation was also accepting "unspecified" (i.e. RSSI) unit values while the nl80211 code was completely unaware of them. Resolve this by formally allowing the "unspecified" units while making nl80211 ignore them. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
2012-03-13cfg80211: clarify timestamp in cfg80211_inform_bssJohannes Berg1-4/+3
This is intended to be the timestamp sent by the peer in the beacon/probe response, not any form of host timestamp. Clarify the documentation and variable names. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12cfg80211: Add background scan period attribute.Bala Shanmugam2-0/+11
Receive background scan period as part of connect command and pass the same to the driver. Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06cfg80211: expose cfg80211_calculate_bitrate()Thomas Pedersen1-0/+1
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06cfg80211/mac80211: report signal strength for mgmt framesJohannes Berg3-6/+13
Add the signal strength (in dBm only for now) to frames that are received via nl80211's various frame APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05cfg80211: Add an attribute to set inactivity timeout in AP modeVasanthakumar Thiagarajan1-0/+8
This patch adds an attribute, NL80211_ATTR_INACTIVITY_TIMEOUT, to set the inactivity timeout which can be used to remove the station in AP mode. This can be passed in NL80211_CMD_START_AP and used by the drivers which have AP MLME in firmware but don't support get_station() properly. To disable inactivity timer in userspace, wpa_s for example, there is a new flag, NL80211_FEATURE_INACTIVITY_TIMER, in nl80211_feature_flags through which drivers can register their capability to use the inactivity timeout to free the stations. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05{nl,cfg,mac}80211: Implement RSSI threshold for mesh peeringAshok Nagarajan2-0/+8
Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29cfg80211: remove cookies from callbacksJohannes Berg1-3/+3
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22cfg80211: restructure AP/GO mode APIJohannes Berg1-113/+142
The AP/GO mode API isn't very clearly defined, it has "set beacon" and "new beacon" etc. Modify the API to the following: * start AP -- all settings * change beacon -- new beacon data * stop AP -- stop AP mode operation This also reflects in the nl80211 API, rename the commands there correspondingly (but keep the old names for compatibility.) Overall, this makes it much clearer what's going on in the API. Kalle developed the ath6kl changes, I created the rest of the patch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 04:35:38 +0000